Find the area shared by the circle r2 = 6 and the cardioid r1 = 6(1 - cos ). The area shared by the circle and the cardioid is (Type an exact answer, using a as needed.) Find the area inside the lemniscate 2 = 24 cos 20 and outside the circle r= V12. The area inside the lemniscate and outside the circle is (Type an exact answer, using a as needed.)

(a) The model for C(t), the concentration of the drug after t hours is      [tex]C(t) = 300 * (0.65^t)[/tex]. (b) The concentration of the drug after 6 hours is      35 mg/mL.

We need to find a model for C(t), the concentration of the drug after t hours, and determine the concentration after 6 hours, using the information provided.

(a) Since the concentration is 65% of the level of the previous hour, we can represent this as a decay model. The general form of an exponential decay model is [tex]C(t) = C_0 * (r^t)[/tex], where [tex]C_0[/tex] is the initial concentration and r is the decay rate.

In this case, the initial concentration [tex]C_0[/tex] is 300 mg/mL, and the decay rate r is 65% or 0.65 (as a decimal). So, our model for C(t) is:

[tex]C(t) = 300 * (0.65^t)[/tex]

(b) To determine the concentration of the drug after 6 hours, we need to plug t = 6 into the model:

[tex]C(6) = 300 * (0.65^6)[/tex]

C(6) ≈ 34.68 mg/mL

Rounding to the nearest whole number, the concentration of the drug after 6 hours is approximately 35 mg/mL.

In summary, the model for the concentration of the drug after t hours is [tex]C(t) = 300 * (0.65^t)[/tex], and the concentration after 6 hours is approximately 35 mg/mL.

Know more about concentration here:

https://brainly.com/question/17206790

#SPJ11

The probability of selecting a female or a mathematics major or both is 0.7 or 70%.

To find the probability that the selected student will be female or a mathematics major or both, we need to add the probabilities of each event happening separately and then subtract the probability of both events happening at the same time.

First, the probability of selecting a female student is 25/50 = 0.5.

Second, the probability of selecting a mathematics major is 15/50 = 0.3.

Third, the probability of selecting a female mathematics major is 10/50 = 0.2.

To find the probability of selecting either a female or a mathematics major, we add the probabilities of each event happening separately:

0.5 + 0.3 = 0.8.

To find the probability of selecting both a female and a mathematics major, we multiply the probabilities of each event happening together:

0.5 x 0.2 = 0.1.

To find the probability of selecting either a female or a mathematics major or both, we subtract the probability of selecting both events at the same time from the sum of the probabilities of each event happening separately:

0.8 - 0.1 = 0.7.

Therefore, the probability of selecting a female or a mathematics major or both is 0.7 or 70%.

To know more about Probability refer here:

https://brainly.com/question/30034780

#SPJ11

When calculating a 99% confidence interval with the same sample size (n) compared to a 95% confidence interval, the margin of error will be larger.

Confidence intervals are used to estimate the true population parameter based on a sample. The confidence level represents the probability that the true population parameter falls within the calculated interval. A 95% confidence interval means that there is a 95% probability that the true parameter lies within the interval, leaving a 5% chance of error. Similarly, a 99% confidence interval means that there is a 99% probability that the true parameter falls within the interval, leaving only a 1% chance of error.

To calculate a confidence interval, the margin of error is added and subtracted from the sample statistic (e.g., mean or proportion). The margin of error is influenced by the confidence level and the sample size. A higher confidence level requires a larger margin of error to account for the increased level of certainty.

As the confidence level increases from 95% to 99%, the margin of error also increases. This is because a higher confidence level requires a larger interval to be confident that the true parameter falls within it. Therefore, when calculating a 99% confidence interval with the same sample size (n) compared to a 95% confidence interval, the margin of error will be larger to accommodate the increased level of confidence.

Therefore, the margin of error will be larger when calculating a 99% confidence interval instead of a 95% confidence interval with the same sample size (n).

To learn more about confidence interval here:

brainly.com/question/24131141#

#SPJ11

The correct interpretation for the answer in part (a) is (C): We can be 95% confident that the percentage of all elementary school children in NY who have received medical examination during the past year lies in the interval (0.7525, 0.8275).

The point estimate for the population proportion is:

= x/n = 632/800 = 0.79

The standard error of the proportion is:

[tex]SE = \sqrt{[\bar p(1-\bar p)/n]} = \sqrt{[(0.79)(0.21)/800] } = 0.0191[/tex]

Using a 95% confidence level, the critical value for a two-tailed test is:

[tex]\bar p[/tex] z = 1.96

The margin of error for the proportion is:

ME = z × SE = 1.96(0.0191) = 0.0375

Therefore, the 95% confidence interval estimate for the population proportion is:

[tex]\bar p[/tex] ± ME = 0.79 ± 0.0375 = (0.7525, 0.8275)

The correct interpretation for the answer in part (a) is (C): We can be 95% confident that the percentage of all elementary school children in NY who have received medical examination during the past year lies in the interval (0.7525, 0.8275).

for such more question on percentage

https://brainly.com/question/27855621

#SPJ11

A random sample of elementary school children in New York state is to be selected to estimate the proportion p who have received a medical examination during the past year. The survey found that x 632 children were examined during the past year. Construct the 95% confidence interval estimate of the population proportion p if the sample size was n 800 (b) Which of the following is the correct interpretation for your answer in part (a)? - A. There is a 95% chance that the percentage of all elementary school children in NY who have received medical examination during the past year lies in the interval -- B. We can be 95% confident that the percentage of elementary school children in the sample who have received medical examination during the last year lies in the interval C. We can be 95% confident that the percentage of all elementary school children in NY who have received medical examination during the past year lies in the interval D. None of the above

Answer: B

Step-by-step explanation:

[tex](x1,y1)=(5,4)[/tex]

Point slope form:

[tex]y-y_{1}=m(x-x_{1} )[/tex]

[tex]m=-\frac{2}{3}[/tex]

Thus, we have:

[tex]y-4=-\frac{2}{3}(x-5)[/tex]

Use Distributive property

[tex]y-4=-\frac{2}{3}x+\frac{10}{3}[/tex]

Add 4 to both sides.

[tex]y=-\frac{2}{3}x+\frac{10}{3}+\frac{4}{1}[/tex]

This equals:

[tex]y=-\frac{2}{3}x+\frac{10}{3}+\frac{12}{3}[/tex]

[tex]y=-\frac{2}{3}x+\frac{22}{3}[/tex]

We need to turn this into standard form.

[tex]Ax+By=C[/tex]

Multiplying 3 to our original equation we have:

[tex]3y=-2x+22[/tex]

Adding 2x to both sides, we get:

[tex]2x+3y=22[/tex]

Therefore, the answer is B. Hope this helps!!!

The length of each side of the square that should be cut to maximize the volume of the box is approximately 3.67 feet.

To solve the problem, we need to find the length of the square cutout that will maximize the volume of the box. Let's assume that each side of the square cutout has a length of x.

We can see that the height of the box will be x, and the length and width of the base will be (12 - 2x) and (10 - 2x), respectively.

Therefore, the volume of the box can be expressed as:

V = x(12 - 2x)(10 - 2x)

Expanding and simplifying, we get:

V = 4[tex]x^3[/tex] - 4[tex]4x^2[/tex] + 120x

To find the value of x that maximizes V, we need to take the derivative of V with respect to x and set it equal to zero:

dV/dx = 12[tex]x^2[/tex] - 88x + 120 = 0

Solving for x using the quadratic formula, we get:

x = (88 ± √([tex]88^2[/tex] - 4(12)(120))) / (2(12))

x = (88 ± 16) / 24

The two possible values of x are:

x = 2 or x ≈ 3.67

To determine which value of x maximizes V, we need to evaluate V at both values of x:

When,

x = 2,

V = [tex]4(2)^3[/tex] - [tex]44(2)^2[/tex] + 120(2)

= 96 cubic feet

When,

x ≈ 3.67,

V = [tex]4(3.67)^3[/tex] - [tex]44(3.67)^2[/tex] + 120(3.67)

≈ 98.15 cubic feet

For similar question on length:

https://brainly.com/question/30100801

#SPJ11

The statement about the median of a sample of size n being beta(a,b) distributed is actually only true when the n random variables are independently

Identically distributed from a Uniform(0,1) distribution. In this case, the median is given by the (a+B)/2-th order statistic, which has a beta(a,b) distribution.

The beta distribution has the following PDF:

f(x) = (1/B(a,b)) * x^(a-1) * (1-x)^(b-1), 0 <= x <= 1

where B(a,b) is the Beta function, defined as:

B(a,b) = (Gamma(a) * Gamma(b)) / Gamma(a+b)

where Gamma(z) is the Gamma function.

The mean and variance of the beta distribution are given by:

Mean = a / (a + b)

Variance = (a * b) / [(a + b)^2 * (a + b + 1)]

Note that in the case where a =B=(n+1)/2, the mean is (n+1)/(2n), which is approximately 0.5 for large n. This means that the beta distribution is often used to model data that are bounded between 0 and 1, such as proportions, probabilities, and rates.

Learn more about Gamma function here:

https://brainly.com/question/18791547

#SPJ11

The shaded area is 239.4 ft²

Mean = (17+15+14+26+9+4+19+12+9+15) / 10 = 14.0
Standard deviation = 5.74
Now, Upper control limit = 14.0 + (3 x 5.74) = 31.22
Lower control limit = 14.0 - (3 x 5.74) = -3.22
Upper control limit = 31.22
Lower control limit = 0
Based on the chart, we can see that all the points are within the control limits, indicating that the process is under control. However, we should continue to monitor the process to ensure that it remains in control.

To determine the control limits for the number of defective units, we'll first calculate the average number of defects and then the control limits using a step-by-step process.

Step 1: Calculate the average number of defective units
Add up all the defective units: 17 + 15 + 14 + 26 + 9 + 4 + 19 + 12 + 9 + 15 = 140 defective units
Divide the total by the number of samples (10): 140 / 10 = 14
The average number of defective units (center line) is 14.

Step 2: Calculate the control limits
For control limits, we'll use the formula: UCL = center line + 3 * (sqrt(center line)) and LCL = center line - 3 * (sqrt(center line))
UCL (Upper Control Limit) = 14 + 3 * (sqrt(14)) ≈ 14 + 3 * 3.74 ≈ 25.22
LCL (Lower Control Limit) = 14 - 3 * (sqrt(14)) ≈ 14 - 3 * 3.74 ≈ 2.78

Step 3: Plot the control limits and the observations
Create a chart with the sample numbers (1-10) on the x-axis and the number of defective units on the y-axis. Draw the center line at 14, the UCL at 25.22, and the LCL at 2.78. Plot the observations (defective units) for each sample.

Step 4: Determine if the process is under control
Check if any of the plotted observations fall outside the control limits. In this case, all the observations fall within the control limits (2.78 to 25.22). Therefore, the process is under control.

Learn more about Limit:

brainly.com/question/12211820

#SPJ11

The unit vector in the same direction as v = 5i - 12j is (5i - 12j)/13 and the magnitude of this new unit vector is 1 is verified.

To find the unit vector in the same direction as a given vector, we first need to find the magnitude of the vector. The magnitude of a vector is the square root of the sum of the squares of its components. For the given vector v = 5i - 12j, the magnitude is:

|v| = √(5² + (-12)²) = √(25 + 144) = √169 = 13

To find the unit vector in the same direction as v, we divide v by its magnitude:

u = v/|v| = (5i - 12j)/13

This gives us the unit vector in the same direction as v. To verify that the magnitude of this new unit vector is 1, we need to find its magnitude:

|u| = √[(5/13)² + (-12/13)²] = √(25/169 + 144/169) = √(169/169) = 1

Therefore, the magnitude of the new unit vector is indeed 1, which confirms that it is a unit vector in the same direction as v.

To learn more about vectors click on,

https://brainly.com/question/18522048

#SPJ4

The indefinite integral of the given function is ln|10ax + bx¹⁰| + C, where C is the constant of integration.

The indefinite integral, also known as the antiderivative, is the reverse process of differentiation.

When we integrate a function, we obtain a family of functions, each of which differs by a constant known as the constant of integration (C).

In this problem, we are asked to evaluate the indefinite integral of the function (a+bx⁹)/(10ax+bx¹⁰) with respect to x. To begin, we can use the substitution method to simplify the integral. Let u = 10ax + bx¹⁰, then du/dx = 10a + 10bx⁹, and dx = du/(10a + 10bx⁹).

Substituting these values, we get:

∫(a+bx⁹)/(10ax+bx¹⁰) dx = ∫(a+bx⁹)/(u) * (du/(10a + 10bx⁹))

Simplifying this expression, we get:

∫(1/u)du = ln|u| + C

Substituting back the value of u, we get:

ln|10ax + bx¹⁰| + C

To know more about integral here

https://brainly.com/question/18125359

#SPJ4

Complete Question:

Evaluate the indefinite integral. (Use C for the constant of integration.)  

∫a+bx⁹ / 10ax+bx¹⁰ dx

For the given quadratic equation, the value of constant abc is -9/8.

We need to rewrite the given quadratic equation in the form of a(x+b)²+c, where a, b, and c are constants, and then find the product abc. To do this, we'll complete the square.

Given quadratic equation: (4/3)x² + 4x + 1

1: Divide the entire equation by the leading coefficient (4/3):

x² + 3x + (3/4)

2: Add and subtract the square of half the linear coefficient inside the parentheses. Half of 3 is 3/2, and (3/2)² is 9/4:

x² + 3x + 9/4 - 9/4 + 3/4

3: Combine the terms and rewrite the equation in the form a(x+b)²+c:

(1)(x + 3/2)² - 3/4

4: Now, we can see that a = 1, b = 3/2, and c = -3/4. So the product abc is:

abc = (1)(3/2)(-3/4) = (-9/8)

Therefore, the value of abc is -9/8.

Learn more about Quadratic equation:

https://brainly.com/question/1214333

#SPJ11

The change of variables X = x, Y = ln(y), C = e^B is used to linearize the exponential regression model so that it can be solved using linear regression.

To find the least-squares curve y = f(x) = Ce^Ax using the change of variables X = x, Y = ln(y), C = e^B for the given data set, we can use the following Matlab code:

X = [-1 0 1 2 3];

Y = [6.62 3.94 2.17 1.35 0.89];

Ylog = log(Y);

A = [X' ones(size(X'))];

B = Ylog';

coeffs = A\B;

C = exp(coeffs(2));

A = coeffs(1);

x = linspace(-1,3);

y = C*exp(A*x);

plot(X,Y,'o',x,y)

The code first defines the x and y values of the data set. Then, it takes the natural logarithm of the y values and defines the matrix A as [X 1]. The matrix B is defined as the transpose of the natural logarithm of y. We use the backslash operator to solve the linear equation Ax = B for the coefficients A and B. We then calculate C as e^B and redefine A as the first element of the coefficients vector. Finally, we define a range of x values and calculate the corresponding y values using the equation y = Ce^Ax. The code then plots the original data points as circles and the least-squares curve as a line.

Note that the least-squares curve y = f(x) = Ce^Ax is equivalent to the exponential regression model y = Ce^Ax, where C is the y-intercept and A is the rate of change. The change of variables X = x, Y = ln(y), C = e^B is used to linearize the exponential regression model so that it can be solved using linear regression.

To learn more about regression visit:

https://brainly.com/question/7656407

#SPJ11

All real numbers x has a relative maximum at x  0.

To find the relative maximum of the function[tex]f(x) = x^3 - 3x^2[/tex], we need to find the critical points of the function by setting its derivative to zero:

[tex]f'(x) = 3x^2 - 6x = 3x(x - 2)[/tex]

The critical points are x = 0 and x = 2. We can now use the second derivative test to determine whether these critical points correspond to a relative maximum or a minimum. The second derivative of f(x) is:

f''(x) = 6x - 6

For x = 0, f''(0) = -6, which is less than zero. This means that the function has a relative maximum at x = 0.

For x = 2, f''(2) = 6, which is greater than zero. This means that the function has a relative minimum at x = 2.

Therefore, the answer is (B) 0.

To learn more about maximum visit:

https://brainly.com/question/30022530

#SPJ11

The profit function is given by: P = R - C = (65,000x - x^2) - (0.8x + 7500) = -x^2 + 64,200x - 7500P = -x^2 + 64,200x - 7500.

To find the intervals on which the profit function is increasing and decreasing, we need to find the critical points. Taking the derivative of the profit function and setting it equal to zero, we get:
P' = -2x + 64,200 = 0
x = 32,100

To determine if the function is increasing or decreasing on each interval, we can use the second derivative test. Taking the derivative of P', we get:

P'' = -2

Since P'' is negative for all values of x, the profit function is decreasing on the interval (-∞, 32,100) and increasing on the interval (32,100, ∞). Therefore, the intervals on which the profit function is increasing and decreasing are:

increasing: (32,100, ∞)
decreasing: (-∞, 32,100)

P(x) = (65,000x - x^2) - (0.8x + 7500)

P(x) = 65,000x - x^2 - 0.8x - 7500

P(x) = -x^2 + 64,200x - 7500

To determine the intervals of increasing and decreasing profit, we first need to find the critical points by taking the derivative of the profit function with respect to x.

P'(x) = -2x + 64,200

To find the critical points, set P'(x) equal to zero and solve for x:

-2x + 64,200 = 0
2x = 64,200
x = 32,100

Now, we need to determine the intervals for increasing and decreasing profit. the profit function is quadratic with a negative leading coefficient, it will have a maximum value. We can determine the intervals using the critical point:

Increasing interval: (0, 32,100)
Decreasing interval: (32,100, 50,000).

To know more about profit function:- https://brainly.com/question/16866047

spj11

The magnitude of v(t) is √313 and the length of the indicated portion of the curve is π√313

To find the unit tangent vector of the curve, we need to first find the velocity vector v(t) and then divide it by its magnitude.

r(t) = (6sin 2t)i + (6 cos 2t)j + 5t K

v(t) = dr/dt = (12 cos 2t)i - (12 sin 2t)j + 5K

The magnitude of v(t) is:

|v(t)| =√(12 cos 2t)² + (-12 sin 2t)² + 5²)

|v(t)| = √(144 + 144 + 25)

|v(t)| = √313

The unit tangent vector T(t) is:

T(t) = v(t)/|v(t)|

= [(12 cos 2t)/√313]i - [(12 sin 2t)/√313]j + (5/√313)K

To find the length of the curve from t = 0 to t = pi, we use the formula:

[tex]L\:=\:\int _a^b\:\:|r'\left(t\right)|\:dt[/tex]

where a = 0 and b = pi.

|r'(t)| = |v(t)| = √313

Therefore, the length of the indicated portion of the curve is π√313

To learn more on Integration click:

https://brainly.com/question/18125359

#SPJ4

find the curve's unit tangent vector. Also, find the length of the indicated portion of the curve.

r(t) = (6sin 2t)i +(6 cos 2t)j + 5t K   0 ≤ t ≤ pi

The thickness measurements of the metal pieces should be centered around a mean value, with the majority of the measurements falling within a certain range and then tapering off towards the tails of the distribution.

Measuring the thickness of pieces of metal with the same dimensions using a micrometer/caliper due to variability in the dimensions caused by errors during the manufacturing process. The distribution of the measurements taken by the entire lab section is expected to resemble a normal distribution, also known as a Gaussian distribution or bell curve.

The reason for this expectation is that the manufacturing process may introduce small, random errors that affect the dimensions of the metal pieces. The central limit theorem states that, given a large enough sample size, the distribution of these random errors will approximate a normal distribution.

The thickness measurements of the metal pieces should be centered around a mean value, with the majority of the measurements falling within a certain range and then tapering off towards the tails of the distribution.

Learn more about Dimensions

brainly.com/question/7980100

#SPJ11

The given statement "GROUPING SETS is extension to GROUP BY clause and is used to specify multiple groupings of data." is true because GROUPING SETS is an extension of the GROUP BY.

GROUPING SETS is an extension of the GROUP BY clause in SQL that allows for multiple groupings of data to be specified, but still provide a single result set. This feature was introduced in SQL Server 2008 and is now supported by many other database management systems.

When using GROUPING SETS, multiple grouping expressions can be listed within a single GROUP BY clause, and the result set will contain one row for each combination of the grouping expressions. This can be useful for generating summary reports or comparing different levels of aggregation.

For example, consider a table containing sales data for a retail store, with columns for date, product, and sales amount. A GROUPING SETS query could be used to generate a report showing total sales by day, by product, and overall, all in a single result set.

The GROUP BY clause could specify grouping sets for (date), (product), and (), which would provide three levels of aggregation in the report.

Overall, GROUPING SETS provides a powerful and flexible tool for grouping data in SQL queries, allowing for multiple levels of aggregation to be specified and combined into a single result set.

To learn more about SQL click on,

https://brainly.com/question/16132638

#SPJ4

The correct answer is a. less than .05. This can be answered by the concept of null hypothesis.

The F ratio in ANOVA is calculated by taking the ratio of the variance between groups to the variance within groups. The F ratio is then compared to critical values from the F table to determine statistical significance. The critical values in the F table represent the values that would be expected to occur by random chance at a certain level of significance, typically 0.05 or 0.01.

If the null hypothesis being tested by ANOVA is false, it means that there is a significant difference between the means of the groups being compared. This would result in a larger F ratio, indicating greater variability between groups relative to within groups. When the obtained F ratio exceeds the value reported in the F table as the 95th percentile, it means that the obtained F ratio is larger than 95% of the possible F ratios that could occur by random chance.

Since the critical values in the F table represent the values that would be expected to occur by random chance at a certain level of significance, if the obtained F ratio exceeds the value reported in the F table as the 95th percentile, it would mean that the result is statistically significant at the 0.05 level of significance (or smaller). In other words, the probability of obtaining an F ratio that exceeds the value reported in the F table as the 95th percentile is less than 0.05.

Therefore, the correct answer is a. less than .05.

To learn more about null hypothesis here:

brainly.com/question/28920252#

#SPJ11

Answer:

(-2, -7)

Step-by-step explanation:

The second equation is already arranged in such a way that allows us to substitute it for x in the first equation, which will then allow us to solve for y:

[tex]-4x+7y=-41\\x=y+5\\\\-4(y+5)+7y=-41\\-4y-20+7y=-41\\3y-20=-41\\3y=-21\\y=-7[/tex]

Now, we can plug in -7 for y in any of the two original equations.  We can do the second one since it's' the simplest of the two:

[tex]x=-7+5\\x=-2[/tex]

Finally, we can check our answers by plugging in -2 for x and -7 for y in both the equations and check that we get -41 for the first equation and -2 for the second equation.

Checking solutions for first equation:

-4(-2) + 7(-7) = -41

8 - 49 = -41

-41 = -41

Checking solutions for second equation:

-2 = -7 + 5

-2 = -2

Answer:60$

Step-by-step explanation:400*%15=60$

Answer:

60%

Step-by-step explanation:

400*%15=60$

The range created for a confidence interval is always written as d. [lower value, higher value]. A confidence interval is a range of values that provides an estimate of an unknown population parameter, such as the mean or proportion.

The correct answer is d. [lower value, higher value]. A confidence interval is a statistical range that is calculated from a sample of data to estimate a population parameter. It is expressed as a range of values that is likely to contain the true population value with a certain degree of confidence. The range is always written in the form [lower value, higher value], where the lower value is the lower bound of the range and the higher value is the upper bound of the range. For example, if a 95% confidence interval for the population mean is calculated from a sample, it may be expressed as [50, 70], indicating that we are 95% confident that the true population mean falls within the range of 50 to 70. It is important to note that the range does not represent the possible values of the population parameter, but rather a range of values that is likely to contain it. The range is calculated based on the sample size, standard deviation, and level of confidence chosen for the interval.

The correct format for a confidence interval range is always written as:
d. [lower value, higher value]
A confidence interval is a range of values that provides an estimate of an unknown population parameter, such as the mean or proportion. This range is calculated from sample data and is based on a desired level of confidence, commonly 95% or 99%. The lower value represents the lower bound of the confidence interval, while the higher value represents the upper bound. The true population parameter is expected to fall within this range with a certain degree of confidence.

To learn more about confidence interval, click here:

brainly.com/question/24131141

#SPJ11

The calculated measure of AD if ABCD is a parallelogram is 23 units

Given that

ABCD is a parallelogram

The opposite sides of a parallelogram are the equal

This means that

AD = BC

So, we have

3y - 1 = y + 15

Evaluate the like terms

So, we have

2y = 16

This gives

y = 8

So, we have

AD = 3(8) - 1

Evaluate

AD = 23

Hence, the length is 23 units

Read more about parallelogram at

https://brainly.com/question/970600

#SPJ1

Answer:

  f'(x) = -2/√(x³)

Step-by-step explanation:

You want the derivative of f(x) = 4/√x.

The power rule for derivatives is ...

  [tex]\dfrac{d}{dx}(x^n)=nx^{(n-1)}[/tex]

Applied to the given function, we have ...

  [tex]f(x)=\dfrac{4}{\sqrt{x}}=4x^{-\frac{1}{2}}\\\\f'(x)=4(-\frac{1}{2}x^{-\frac{3}{2}})\\\\\boxed{f'(x)=-\dfrac{2}{\sqrt{x^3}}}[/tex]

__

Additional comment

The first attachment shows a calculator gives the same result.

The second attachment shows the derivative curve matches the one described by the function we found.

The length of the missing side in the right triangle is 6.5

We can see that it is a right triangle, thus, we can use the Pythagorean's theorem.

It says that the sum of the squares of the legs is equal to the square of the hypotenuse.

So if x is the missing side, we can write:

x² + 3.6² = 7.4²

Solving that for x we will get.

x = √(7.4² - 3.6²) = 6.5

That is the length of the missing side.

LEarn more about right triangles at:

https://brainly.com/question/2217700

#SPJ1

The solution to the differential equation is given by the equation arctan(x) + arctan(y) - ln|x²+y²+1| = C.

The differential equation is given as:

x(1+y²)dx-y(1+x²)dy=0

To solve this differential equation, we can start by rearranging the terms and separating the variables. We can start by dividing both sides by x(1+y²), which gives:

dx/(1+y²) - y(1+x²)/(x(1+y²)) dy = 0

Next, we can integrate both sides of the equation. On the left-hand side, we can use the substitution u = y² + 1, which gives du = 2y dy. The equation then becomes:

∫dx/(1+y²) - ∫(1+x²)/x du = C

where C is the constant of integration.

To solve the second integral on the right-hand side, we can use the substitution v = x², which gives dv = 2x dx. The equation then becomes:

∫dx/(1+y²) - ∫(1+v)/v dv = C

To solve the first integral, we can use the substitution y = tanθ, which gives dy = sec²θ dθ. The equation then becomes:

∫dx/cos²θ - ∫(1+v)/v dv = C

We can simplify the first integral using the trigonometric identity sec²θ = 1 + tan²θ. The equation then becomes:

∫dx/(1+ tan²θ) - ∫(1+v)/v dv = C

The first integral can be evaluated using the substitution x = tanφ, which gives dx = sec²φ dφ. The equation then becomes:

∫sec²φ dφ/(1+tan²θ) - ∫(1+v)/v dv = C

Simplifying the first integral using the identity sec²φ = 1 + tan²φ, the equation becomes:

∫(1+tan²θ) dθ/(1+tan²θ) - ∫(1+v)/v dv = C

The first integral simplifies to ∫dθ, which is just θ + K, where K is another constant of integration. Substituting back the variables, we have:

arctan(x) + arctan(y) - ln|v| = C

where v = x² and C = K - ln|D|, where D is a constant of integration.

Finally, we can substitute back the variables u = y² + 1 and v = x² to obtain the solution to the differential equation:

arctan(x) + arctan(y) - ln|x²+y²+1| = C

To know more about differential equation here

https://brainly.com/question/30074964

#SPJ4

Complete Question:

Solve the differential equation:

x(1+y²)dx-y(1+x²)dy=0

National Electric incurred a total cost of $7,950 in producing the first 500 coffeemakers/day.

To find the total cost incurred by National in producing the first 500 coffeemakers/day, we need to calculate the sum of the fixed cost and the variable cost for producing 500 units.

The fixed cost is given as $700.

To find the variable cost, we first need to calculate the marginal cost function, which is the derivative of the cost function:

[tex]C'(x) = 0.00003x^2 - 0.03x + 24[/tex]

The variable cost of producing x units is given by integrating the marginal cost function from 0 to x:

[tex]C(x) = \int [0, x] C'(t) dt[/tex]

[tex]C(x) = \int [0, x] (0.00003t^2 - 0.03t + 24) dt[/tex]

[tex]C(x) = 0.00001t^3 - 0.015t^2 + 24 [0, x][/tex]

[tex]C(x) = 0.00001x^3 - 0.015x^2 + 24x[/tex]

So, the variable cost of producing 500 units is:

[tex]C(500) = 0.00001(500)^3 - 0.015(500)^2 + 24(500) = $7,250[/tex]

Therefore, the total cost incurred by National in producing the first 500 coffeemakers/day is:

Total cost = Fixed cost + Variable cost

Total cost = $700 + $7,250

Total cost = $7,950.

For similar question on Electric.

https://brainly.com/question/26978411

#SPJ11

We can conclude that the mean tuition and fees for private institutions in California are less than $35000 with 95% confidence.

Yes, we can conclude that the mean tuition and fees for private institutions in California are less than $35000. We can use a one-sample t-test to determine whether the mean annual tuition and fees for the sample of 14 private colleges in California is significantly less than $35000.
First, we need to calculate the t-statistic:
t = (sample mean - hypothesized mean) / (standard error of the mean)
The hypothesized mean is $35000, the sample mean is $33500, and the standard error of the mean is calculated as follows:
standard error of the mean = standard deviation / sqrt(sample size)
standard error of the mean = $7350 / sqrt(14)
standard error of the mean = $1965.15
Plugging in these values, we get:
t = ($33500 - $35000) / $1965.15
t = -1.555

Using a t-table with 13 degrees of freedom (14-1), we find that the critical value for a one-tailed test with alpha = 0.05 is -1.771. Since our calculated t-value (-1.555) is greater than the critical value (-1.771), we fail to reject the null hypothesis that the mean tuition and fees for private institutions in California are $35000. Therefore, we can conclude that the mean tuition and fees for private institutions in California are less than $35000 with 95% confidence.

Learn more about mean here: brainly.com/question/31101410

#SPJ11

The factors of Rice type (brown or white), Cheese type (cheddar or mozzarella), and Bean type (black or pinto) seem to have a significant impact on whether children enjoy the taco bowls on Taco Tuesday.

55 Based on the Pareto Chart of the Effects, the significant main effects that should be retained are Rice, Cheese, and Beans.

To determine the significant main effects, we will use Lenth's Pseudo Standard Error (PSE) as a reference point. In this case, the Length's PSE is 0.28125. Main effects with an effect greater than the PSE are considered significant.

From the Pareto Chart of the Effects, the main effects and their values are:

1. Cheese (C): 0.58
2. Sour Cream (B): Value not provided
3. Beans (A): Value not provided
4. Rice (D): Value not provided
5. Chips (E): Value not provided
6. Salsa (F): Value not provided

We can see that only the Cheese effect (0.58) is provided and is greater than Lenth's PSE (0.28125), so it is significant. Unfortunately, we do not have enough information to determine the significance of the other factors.

However, based on the provided information, the significant main effect that should be retained is: Cheese

Learn more about Factors:

brainly.com/question/26923098

#SPJ11