Find the area of a triangle that has sides of 7, 9, and 12 inches

The statement is True.

The statement "95% confidence interval (5.623 to 6.377)" means that if we were to repeat this process of taking 100 samples from the population and constructing a confidence interval for each sample, then about 95% of those intervals would contain the true population mean.

This is the definition of a confidence interval at a certain level of confidence (in this case, 95%). Therefore, the statement is true.

To know more about confidence refer here:

https://brainly.com/question/29048041

#SPJ11

The measure of the angle x in the circle is 65 degrees

From the question, we have the following parameters that can be used in our computation:

The circle

On the circle, we have the angle at the vertex of the triangle to be

Angle = 100/2

Angle = 50

The sum of angles in a triangle is 180

So, we have

x + x + 50 = 180

Evaluate the like terms,

2x = 130

So, we have

x = 65

Hence, the angle is 65 degrees

Read mroe about angles at

https://brainly.com/question/28293784

#SPJ1

Answer: Therefore, the plastic for the prototypes will cost $1,452,150.

Step-by-step explanation:

The volume of the cube can be calculated as:

Volume of the cube = (side length)^3 = (14 mm)^3 = 2,744 mm^3

The volume of the hole can be calculated as:

Volume of the hole = (1/4) x π x (diameter)^2 x thickness = (1/4) x π x (12 mm)^2 x 14 mm = 5,049 mm^3

The volume of plastic used to create one prototype can be calculated as:

Volume of plastic = Volume of cube - Volume of hole = 2,744 mm^3 - 5,049 mm^3 = -2,305 mm^3

Note that the result is negative because the hole takes up more space than the cube.

However, we can still use the absolute value of this result to calculate the cost of the plastic:

Cost of plastic per prototype = |Volume of plastic| x Cost per cubic millimeter = 2,305 mm^3 x $0.07/mm^3 = $161.35/prototype

To find the cost of the plastic for 9,000 prototypes, we can multiply the cost per prototype by the number of prototypes:

Cost of plastic for 9,000 prototypes = 9,000 x $161.35/prototype = $1,452,150

The plastic for the prototypes will cost $1,452,150.

To Know more about prototypes refer here

https://brainly.com/question/28187820#

#SPJ11

Answer:

A = 5026.548246 m²

Step-by-step explanation:

Equation for Area of a Circle: A = πr² where r is the radius.

The radius of a circle is always half the diameter. Since we know the diameter is 80m, we can divide by 2 to find our radius.

80/2 = 40m

Now that we have found our radius, we can plug the value into r and solve.

A = π(40)² = 5026.548246 m²

Answer:

The answer to your problem is, F = 15N

Step-by-step explanation:

You have: F = ka

Where F is the force acting on the object, A is the object's acceleration and is the constant of proportionality.

Which will be our letters that we will NEED to use for today.

You can calculate the constant of proportionality by substituting F = 18 and a = 6 into the equation and solving for k: Then we can now figure out the “ formula of expression “

18 = k6

k = [tex]\frac{18}{6}[/tex]

K = 3

We would need to calculate the force when the acceleration of the object becomes 5 m/s², as following: F = 3 x 5 ( Basic math )

= F = 15

Thus the answer to your problem is, F = 15N

we have the first eight terms, let's analyze the sequence. There doesn't appear to be a clear pattern or convergence towards a single value. The values are fluctuating, suggesting that the series may be divergent.

To find the first eight terms of the sequence of partial sums for the series sin(n), we will calculate the sum of the series for each term up to n=8, and then determine whether the series appears to be convergent or divergent.

1. sin(1)

2. sin(1) + sin(2)

3. sin(1) + sin(2) + sin(3)

4. sin(1) + sin(2) + sin(3) + sin(4)

5. sin(1) + sin(2) + sin(3) + sin(4) + sin(5)

6. sin(1) + sin(2) + sin(3) + sin(4) + sin(5) + sin(6)

7. sin(1) + sin(2) + sin(3) + sin(4) + sin(5) + sin(6) + sin(7)

8. sin(1) + sin(2) + sin(3) + sin(4) + sin(5) + sin(6) + sin(7) + sin(8)

Now, let's calculate these sums up to four decimal places:

1. 0.8415

2. 0.8415 + 0.9093 = 1.7508

3. 1.7508 + 0.1411 = 1.8919

4. 1.8919 - 0.7568 = 1.1351

5. 1.1351 - 0.9589 = 0.1762

6. 0.1762 - 0.2794 = -0.1032

7. -0.1032 + 0.6569 = 0.5537

8. 0.5537 + 0.9894 = 1.5431

Now that we have the first eight terms, let's analyze the sequence. There doesn't appear to be a clear pattern or convergence towards a single value. The values are fluctuating, suggesting that the series may be divergent.

Learn more about sequence of partial sums,

https://brainly.com/question/28173651

#SPJ11

The general solution to the differential equation dy/dt - 5y = A is y = Ce^(5t) + A/5, where C is a constant of integration. The general solution is y = (A/5) + Ce^(5t). so, the correct answer is D).

The general solution to the differential equation dy/dt - 5y = A, where A is a constant, is

y = Ce^(5t) + A/5

where C is an arbitrary constant determined by any initial or boundary conditions given.

The general solution is a combination of the homogeneous solution y_h = Ce^(5t) (which satisfies the differential equation without the constant term A) and the particular solution y_p = A/5 (which satisfies the differential equation with A but without any initial or boundary conditions).

so, the correct option is D).

To know more about differential equation:

https://brainly.com/question/14620493

#SPJ4

--The given question is incomplete, the complete question is given

" Answer quickly please

Given that A is a constant, the general solution to the differential equation dy/dt -5y = A is Select one O a. 3t2 2 Ob. 3= Ae-56 Ос. y = Aest Od y = Ce^(5t) +A/5 The solution to the exact differential equation"--

The result of applying the square root property of equality to this equation is x = (-b ± √(b² - 4ac)) / (2a)

If we apply the square root property of equality to the equation (x + (b/2a))² = (-4ac + b²)/(4a²), we get:

x + (b/2a) = ±√[(-4ac + b²)/(4a²)]

Next, we can simplify the expression under the square root:

√[(-4ac + b²)/(4a²)] = √(-4ac + b²)/2a

Now, we can substitute this expression back into our original equation:

x + (b/2a) = ±√(-4ac + b²)/2a

Finally, we can isolate x by subtracting (b/2a) from both sides:

x = (-b ± √(b² - 4ac)) / (2a)

This is the quadratic formula, which gives us the solutions for the quadratic equation ax² + bx + c = 0. By completing the square, we have derived this formula from the original quadratic equation.

To learn more about quadratic formula click on,

https://brainly.com/question/16601208

#SPJ4

Complete question is:

In the derivation of the quadratic formula by completing the square, the equation (x+ (b/2a))² =(-4ac+b²)/(4a²) is created by forming a perfect square trinomial What is the result of applying the square root property of equality to this equation?

To solve the inequality -1/2x ≥ 17, we can start by isolating x on one side of the inequality.

Multiplying both sides by -2 (and reversing the direction of the inequality since we are multiplying by a negative number), we get:

x ≤ -34

So the solution to the inequality is x ≤ -34.

To graph the solution, we can draw a number line and mark -34 on it. Then we shade all the values of x that are less than or equal to -34. This can be represented by a closed circle at -34 and a shaded line to the left of -34, indicating that any value of x in that range satisfies the inequality.

Here is a graph of the solution:

```

<=====(●)-----------------------

     -34

```

The shaded part of the line represents the values of x that satisfy the inequality -1/2x ≥ 17, and the closed circle at -34 indicates that x can be equal to -34 (since the inequality is "greater than or equal to").

a) The total distance that he ran is 10v + 187.5a.

b) The second athlete takes 10 seconds to run 100m.

a) To find the total distance that the athlete ran, we need to calculate the distance covered during each phase of the motion.

During the first 20 seconds, the athlete accelerated at a constant rate from rest. We can use the formula:

distance = (1/2) * acceleration * time²

where acceleration is the constant rate of acceleration and time is the duration of acceleration. Plugging in the values we get:

distance = (1/2) * a * (20)² = 200a

So, the distance covered during the first phase is 200a meters.

During the next 10 seconds, the athlete ran at a constant speed. The distance covered during this phase is:

distance = speed * time = 10s * v

where v is the constant speed of the athlete during this phase.

Finally, during the last 5 seconds, the athlete decelerated at a constant rate until coming to a stop. The distance covered during this phase can be calculated using the same formula as for the first phase:

distance = (1/2) * acceleration * time² = (1/2) * (-a) * (5)² = -12.5a

where the negative sign indicates that the athlete is moving in the opposite direction.

Adding up the distances covered during each phase, we get:

total distance = 200a + 10v + (-12.5a) = 10v + 187.5a

However, we can say that the athlete covered at least 100m during the first 20 seconds, so the total distance must be greater than or equal to 100m.

b) The second athlete runs along the same track and accelerates at the same rate as the first athlete. We know that the first athlete covered 100m during the first 20 seconds of motion. So, we can use the same formula as before to find the acceleration:

distance = (1/2) * acceleration * time²

100m = (1/2) * a * (10s)²

Solving for a, we get:

a = 2 m/s²

Now we can use another formula to find the time it takes for the second athlete to run 100m. Since the second athlete only accelerates for 10 seconds, we can use:

distance = (1/2) * acceleration * time² + initial velocity * time

where initial velocity is zero since the athlete starts from rest. Plugging in the values we get:

100m = (1/2) * 2 m/s² * (t)²

Solving for t, we get:

t = 10s

So, the second athlete takes 10 seconds to run 100m.

To know more about distance and time, refer to the link below:

https://brainly.com/question/13264571#

#SPJ11

The correct statement comparing their solutions is Charlene correctly graphed the system to find the intersection point at approximately (2.5,5.25).

option C is correct.

Mathematically, an equation can be described as a statement that supports the equality of two expressions, which are connected by the equals sign “=”.

Since Charlene graphed the system and found a solution of x ≈ 2.5 and y ≈ 5.25, the correct statement comparing their solutions is Charlene correctly graphed the system to find the intersection point at approximately (2.5,5.25).

In conclusion, the three major forms of linear equations: are

Learn more about linear equations at:

https://brainly.com/question/2030026

#SPJ1

The expression for the calculation of adding 8 to the sum of 23 and 10 is 8 + (23 + 10)

To calculate expression parentheses the sum of 23 and 10, we add them together, which gives us 33. Then, we add 8 to that result, giving us a final answer of 41. So, the expression 8 + (23 + 10) equals 41.

This expression follows the order of operations, which states that we should first perform the addition inside the parentheses and then add the result to 8.

expressions are made up of numbers and symbols, and they represent a mathematical relationship or operation. In this case, the expression includes addition and parentheses, which tell us to perform the addition inside them first. The parentheses clarify which numbers should be added together first before adding 8.

To learn more about expressions parentheses

brainly.com/question/23978428

#SPJ11

Answer:

radius is 50.95

area is 8158.55

Step-by-step explanation:

cirumference = 2pi×r

or,320.28=2×(22/7)×r

or, r=320.28/(2×(22/7))

r=50.95 cm

area=(22/7)r^2

=8158.55

We know that the diameter of the wheel is 1215 inches

Since CD is a perpendicular bisector of AB, it means that CD passes through the center of the circle. Let O be the center of the circle. Then OD is the radius of the circle.

Since chord CE passes through the center O, it is a diameter of the circle. Therefore, CE = 2OD.

Let's use the intersecting chords theorem to find OD.

According to the intersecting chords theorem,

AC * CB = EC * CD

We know that AC = CB (since they are radii of the same circle) and CD = 4 inches. We also know that AB = 12 inches. Let's call the length of segment AE x. Then the length of segment EB is 12 - x.

So we have:

x * (12 - x) = EC * 4

Simplifying:

12x - x^2 = 4EC

Rearranging:

EC = 3x - x^2/4

Now let's use the intersecting chords theorem again, but this time for chords AB and CD:

AC * CB = AD * DB

We know that AC = CB and AB = 12 inches. Let's call the length of segment AD y. Then the length of segment DB is 12 - y.

So we have:

x^2 = y * (12 - y)

Simplifying:

y^2 - 12y + x^2 = 0

Using the quadratic formula:

y = (12 ± sqrt(144 - 4x^2))/2

We can discard the negative solution (since y is the length of a segment, it cannot be negative), so:

y = 6 + sqrt(36 - x^2)

Now let's use the fact that CD is a perpendicular bisector of AB to find x.

Since CD is a perpendicular bisector of AB, it divides AB into two segments of equal length. Therefore,

AD = DB = 6

Using the Pythagorean theorem in triangle ACD:

AC^2 + CD^2 = AD^2

Substituting the values we know:

x^2 + 4^2 = 6^2

Solving for x:

x = sqrt(20)

Now we can find EC:

EC = 3x - x^2/4

Substituting x:

EC = 3sqrt(20) - 5

Finally, we can find OD:

AC * CB = EC * CD

Substituting the values we know:

(2OD)^2 = (3sqrt(20) - 5) * 4

Simplifying:

OD^2 = 12sqrt(20) - 20

OD = sqrt(12sqrt(20) - 20)

We are asked to find the diameter of the circle, which is twice the radius:

Diameter = 2OD = 2sqrt(12sqrt(20) - 20)

This is approximately equal to 1215 inches.

So the answer is:

The diameter of the wheel is 1215 inches.

To know more about diameter refer here

https://brainly.com/question/5501950#

#SPJ11

The triangle with sides 1, 4, and 7 is classified as an impossible triangle.

A triangle must satisfy the triangle inequality theorem, which states that the sum of the lengths of any two sides must be greater than the length of the third side. In this case, the sides are 1, 4, and 7. Adding the lengths of any two sides, we have:

1 + 4 = 5, which is less than 7
1 + 7 = 8, which is greater than 4
4 + 7 = 11, which is greater than 1

Since 1 + 4 is not greater than 7, the triangle inequality theorem is not satisfied, and therefore, a triangle with sides 1, 4, and 7 cannot exist.

To know more about triangle inequality theorem click on below link:

https://brainly.com/question/1163433#

#SPJ11

There are 26 zeros in this number when it is written in standard notation. The correct answer is option (A). The mass of the sun is estimated to be 1.9891 x 10³⁰kg. To determine the number of zeros in this number when written in standard notation, we need to first convert it to standard form.

In standard form, the number is expressed as a decimal between 1 and 10 multiplied by a power of 10. To convert the given number to standard form, we move the decimal point 30 places to the right because the exponent is positive 30. This gives us 1989100000000000000000000000000. As we can see, there are 27 digits in this number. Therefore, there are 27-1=26 zeros in this number when it is written in standard notation.

In conclusion, the answer is A, 26. This type of question is commonly asked in science and engineering, where large or small numbers are expressed in scientific notation for convenience. Understanding how to convert between scientific notation and standard form is important for anyone studying or working in these fields.

To know more about standard notation click here

brainly.com/question/26043728

#SPJ11

The possible total number of boys and girls in the class is 21, and

the answer is b).

Let's denote the number of girls in the class as 'g' and the number of

boys as 'b'.

We know that all students in the class study either French or German,

but not both.

Therefore, the total number of students in the class is equal to the sum

of the number of students who study French and the number of students

who study German

From the given information, we can write the following equations:

        study German

Substituting this into the first equation, we get:

Substituting this into the first equation, we get:

Therefore, the total number of students in the class must be a multiple

of 3.

Let's try the answer choices:

a) 15 students (total number of students is not a multiple of 3)

b) 21 students (total number of students is a multiple of 3 and the

number of girls is a multiple of 3, so this is a possible solution)

c) 24 students (total number of students is a multiple of 3 and the

number of girls is not a multiple of 3)

d) 30 students (total number of students is a multiple of 3 but the

number of girls is not a multiple of 3)

To know more about  total number refer here https://brainly.com/question/14993202# #SPJ11

This loan has an interest 4. 5% compounded quarterly, account balance after 10 years:

The initial loan amount is $20,000, and it has an interest rate of 4.5% compounded quarterly. You would like to know the account balance after 10 years.

To calculate the account balance, we will use the compound interest formula:

A = P(1 + r/n)^(nt)

Where:

A = the future value of the loan
P = the initial loan amount ($20,000)

r = the annual interest rate (0.045)
n = the number of times the interest is compounded per year (4, since it is compounded quarterly)

t = the number of years (10)

Plugging in the values:

A = 20000(1 + 0.045/4)^(4*10)

A = 20000(1.01125)^40

A ≈ 30,708.94

The account balance after 10 years will be approximately $30,708.94.

To know more about interest, refer here:

https://brainly.com/question/20406888#

#SPJ11

Answer:well i don't know what you're asking for but i got this

Blouses, she earned $26

Skirts, she earned $33

Pants, she earned $175

So basically she s c a m m i n g but she still got that bank she made though

Step-by-step explanation:

25x2=50; 38x2=76; 76-50=26

15x3=45; 26x3=78; 78-45=33

30x5=150; 65x5=325; 325-150=175

The expansion of (1+root 2)(3-root 2) is 1 +2√2.

What is distributive property?

The distributive Property states that it is necessary to multiply each of the two numbers by the factor before performing the addition operation when a factor is multiplied by the sum or addition of two terms.

Apply the distributive property

1(3-√2) + √2(3-√2)

Apply distributive property

1.4+ 1(-√2) +√2 (3-√2)

Apply the distributive property

1.3 + 1(-√2) + √2. 3+√2 (-√2)

3+1(−√2)+√2⋅3+ √2(-√2)

Multiply − √2 by 1

3−√2+ √2⋅3+√2(−√2)

Move 3 to the left of √2.3−√2+3⋅√2+√2(−√2)

Multiply √2(−√2)

3−√2+3√2−√2²

Rewrite

√2² as 2.

3−√2+3√2− 1⋅2

Multiply − 1 by 2.

3−√2+3√2−2

Subtract 2 from 3.

1−√2+3√2

Add  −√2 and 3√2.

1+2√2

Exact Form:

1 +2√2

Decimal Form:

3.82842712

Therefore, the expansion of (1+root 2)(3-root 2) is 1 +2√2.

To know more about distributive check the below link:

https://brainly.com/question/2807928

#SPJ9

(a) The minimum number of hikers who could have walked between 7 miles and 18 miles: at least 5 hikers and at most 13 hikers.

(b) The maximum number of hikers who could have walked between 7 miles and 18 miles:  at most 15 hikers.

According to the question and given conditions, we need to find the cumulative frequency of the distance intervals that fall within the range of 7 miles and 18 miles, to find the minimum number of hikers and the maximum number of hikers who could have walked between 7 miles and 18 miles.

The sum of the frequencies up to a certain point in the data is the cumulative frequency. By adding the frequency of the current interval to the frequency of the previous interval, we can calculate the cumulative frequency.

a) To find the minimum number of hikers who could have walked between 7 miles and 18 miles, we will find the cumulative frequency of the intervals from 5 miles to 10 miles and then from 10 miles to 15 miles.

Cumulative frequency for 5 < x <= 10: 2 + 3 = 5

Cumulative frequency for 10 < x <= 15: 5 + 8 = 13

Therefore, we find that at least 5 hikers and at most 13 hikers could have walked between 7 miles and 18 miles.

b) To find the maximum number of hikers who could have walked between 7 miles and 18 miles, we will find the cumulative frequency of the intervals from 10 miles to 15 miles and from 15 miles to 20 miles.

Cumulative frequency for 10 < x <= 15: 8

Cumulative frequency for 15 < x <= 20: 8 + 7 = 15

Therefore, we can conclude that at most 15 hikers could have walked between 7 miles and 18 miles.

To know more about statistics;

brainly.com/question/15525560

#SPJ1

The complete question is "a) work out the minimum number of hikers who could have walked between 7 miles and 18 miles b) work out the maximum number of hikers who could have walked between 7 miles and 18 miles."

To find the revenue function, we need to multiply the price (p) by the quantity (x):

R(x) = xp = (2220 - x^2) x

Expanding this expression, we get:

R(x) = 2220x - x^3

To find the cost function, we can simply use the given formula:

C(x) = 900 + 14x + x^2

To find the profit function, we subtract the cost from the revenue:

P(x) = R(x) - C(x)

= (2220x - x^3) - (900 + 14x + x^2)

= -x^3 + 2206x - 900

To find P'(x), the derivative of P(x) with respect to x, we take the derivative of the expression for P(x):

P'(x) = -3x^2 + 2206

Setting P'(x) equal to zero and solving for x, we get:

-3x^2 + 2206 = 0

x^2 = 735.333...

x ≈ 27.104

We can't produce a fraction of a hundred units, so we round down to the nearest hundredth unit, giving x = 27.

To confirm that this value gives a maximum profit, we can check the sign of P''(x), the second derivative of P(x) with respect to x:

P''(x) = -6x

When x = 27, P''(x) is negative, which means that P(x) has a local maximum at x = 27.

Therefore, the quantity that will give the maximum profit is 2700 units (27 x 100).

To find the maximum profit, we evaluate P(x) at x = 27:

P(27) = -(27)^3 + 2206(27) - 900

= 53,955 dollars

Therefore, the maximum profit is $53,955.

Visit here to learn more about revenue function brainly.com/question/28545124

#SPJ11

To find dy/dt, we need to use implicit differentiation.

First, we differentiate both sides of the equation with respect to t:

2x(dx/dt) + 2y(dy/dt) = 2(dx/dt) + 4(dy/dt)

Next, we plug in the given values for x, y, and dx/dt:

2(3)(7) + 2(1)(dy/dt) = 2(7) + 4(dy/dt)

Simplifying, we get:

42 + 2(dy/dt) = 14 + 4(dy/dt)

Subtracting 2(dy/dt) and 14 from both sides:

28 = 2(dy/dt)

Finally, we divide both sides by 2 to solve for dy/dt:

dy/dt = 14
To find dy/dt, first differentiate the given equation x^2+y^2=2x+4y with respect to time t. Use the chain rule:

2x(dx/dt) + 2y(dy/dt) = 2(dx/dt) + 4(dy/dt).

Now substitute the given values, x = 3, y = 1, and dx/dt = 7:

2(3)(7) + 2(1)(dy/dt) = 2(7) + 4(dy/dt).

Solve for dy/dt:

42 + 2(dy/dt) = 14 + 4(dy/dt).

Rearrange and solve:

2(dy/dt) - 4(dy/dt) = 14 - 42,

-2(dy/dt) = -28.

Finally, divide by -2:

dy/dt = 14.

So the value of dy/dt is 14 when x = 3, y = 1, and dx/dt = 7.

Learn more about implicit differentiation here: brainly.com/question/11887805

#SPJ11

After evaluating the integral ∫√(x-x²)dx, we get:

∫√u (1 - 2x) du, with the limits of integration 0 to 1/4

To evaluate the integral ∫√(x-x²)dx using the indicated table of integrals, you should look for an entry in the table that matches the given integral's form. Unfortunately, I do not have access to the specific table you are referring to. However, I can guide you on how to approach this problem.

First, you should make a substitution:

let u = x - x², then du = (1 - 2x)dx. To proceed with this substitution, you'll need to rewrite the integral in terms of 'u' and 'du'. Notice that when x = 1/2, u = 1/4.

Therefore, you can change the limits of integration as well: x = 0 corresponds to u = 0, and x = 1 corresponds to u = 0.

Now,
∫√(x-x²)dx = (1/2) ∫(1-4x+4x²-3)⁽¹/²⁾ dx

Now, we can look up the integral in the table of integrals, which indicates that:

∫(1-4x+4x²-3)⁽¹/²⁾ dx = (1/2) [ (x-1)√(1-4x+4x²) + 2arcsin(2x-1) ] + C

Therefore, substituting this result back into the original integral, we get:

∫√(x-x²)dx = (1/2) [ (x-1)√(1-4x+4x²) + 2arcsin(2x-1) ] + C

where C is the constant of integration.

Learn more about Integral:

brainly.com/question/18125359

#SPJ11

The height of the cuboid, after calculations, in the form (a+ b√3)m, is (6√3 - 9)/47 meters.

Let the height of the cuboid be h meters. The area of the square base is given by:

(2 + √3)² = 4 + 4√3 + 3 = 7 + 4√3 m²

The total surface area of the cuboid is the sum of the areas of the six rectangular faces. Since the base is a square, the area of each of the four vertical rectangular faces is also (2 + √3) × h = (2h + h√3) m². Therefore, we have:

Total surface area = 4(7 + 4√3) + 2(2h + h√3)(2 + √3) = 8h + 26 + (22 + 16√3)h

Since we know that one of the sides has area (2√3 - 3) m², we can set up another equation:

(2h + h√3)(2 + √3) = 2√3 - 3

Expanding the left side and simplifying, we get:

(2h + h√3)(2 + √3) = 2√3 - 3

4h + 7h√3 = 2√3 - 3

h(4 + 7√3) = 2√3 - 3

h = (2√3 - 3)/(4 + 7√3)

We can rationalize the denominator by multiplying the numerator and denominator by the conjugate of the denominator:

h = [(2√3 - 3)/(4 + 7√3)] × [(4 - 7√3)/(4 - 7√3)]

h = (8√3 - 12 - 14√3 + 21)/(16 - 63)

h = (9 - 6√3)/(-47)

h = (6√3 - 9)/(47)

Therefore, the height of the cuboid is (6√3 - 9)/47 meters.

To know more about cuboid, visit:

https://brainly.com/question/29568631#

#SPJ11

The density of the wooden cube is 0.638 g/cm³. The type of wood the cube is made of is ash.

The wooden cube has a edge length of 6 centimetres and a mass of 137.8 grams.

The density of the wood can be calculated as follows:

density = mass / volume

volume of the wood = l³

where

Therefore,

volume of the wood = 6³

volume of the wood = 216 cm³

density of the wood = 137.8 / 216

density of the wood = 0.63796296296

density of the wood = 0.638 g/cm³

Therefore, the cube wood is made of ash.

Learn more on density here: brainly.com/question/8827822

#SPJ1

The correct answer is (C) -8x12.

To simplify (4x^4)^-3, we use the power of a power rule which states that (a^m)^n = a^(mn), where a is a non-negative number and m and n are integers. Applying this rule, we get:

(4x^4)^-3 = 4^(-3) x^(4 x -3) = (1/64)x^(-12) = -8x^12 (using the negative exponent rule, which states that a^(-n) = 1/a^n)

Therefore, the simplified form of (4x^4)^-3 is -8x^12.

To know more about power rule refer here:

https://brainly.com/question/23418174

#SPJ11