what is the value for 43.7 x 0.25
Answer:
43.7 x 0.25 is 10.925
Step-by-step explanation:
To multiply decimals, we can use the following steps:
1. Multiply the numbers as if they were whole numbers, ignoring the decimal points.
2. Count the total number of decimal places in the factors being multiplied. This will be the number of decimal places in the product.
3. Place the decimal point in the product so that it has the same number of decimal places as the total counted in step 2.
Using these steps, we can find the product of 43.7 and 0.25 as follows:
1. 437 x 25 = 10925
2. There are two decimal places in 43.7 and two decimal places in 0.25, so there are a total of four decimal places in the factors being multiplied.
3. Place the decimal point in the product so that it has four decimal places: 10.925
Therefore, the value of 43.7 x 0.25 is 10.925.
Write an inequality that matches the number line model. Then write
a situation that the inequality could represent.
-2.75 is greater than or equal to x
Answer:
x<=-2.75
Step-by-step explanation:
[tex]y=2cos^{2}(x) , y=2e^{-x}+2x-2[/tex]
(a) Write an equation whose solutions are the points of intersection of the graphs.
(b) Use the intersect feature of the graphing utility to find the points of intersection (to four decimal places). (Enter the point of intersection whose x-coordinate is within the interval [0, 2). If there is no solution, enter NO SOLUTION.)
a. The equation whose solutions are the points of intersection of the graphs is y = -0.14x + 0.80.
b. The points of intersection are (-0.827, 0.918) and (0.951, 0.675).
The solution has been obtained using the slope - intercept form.
What is the slope - intercept form?
When you are aware of the slope of the line being investigated and the given point is also the y intercept, use the slope intercept formula, y = mx + b. (0, b). The y value of the y intercept point is represented by the symbol b in the equation.
a. From the graph, we have two points of intersection.
Using this, we get the slope as;
m = -0.14
Now, using the slope intercept form, we get the intercept as
b = 0.80
So, the equation comes out to be
y = -0.14x + 0.80
b. The graph of the equations have been attached below.
From the graph, we get the points of intersection as (-0.827, 0.918) and (0.951, 0.675). Both the points have their x-coordinate within the interval [0, 2).
Hence, the required solutions have been obtained.
Learn more about slope - intercept form from the given link
https://brainly.com/question/22057368
#SPJ1
which of the following is equivalent to x-5/3?
The following expression is equivalent to [tex]x^{-5/3}[/tex] as option B that is 1/∛x⁵.
What is fraction?A fraction is a numerical representation of a part or a portion of a whole. It is expressed as one integer (numerator) divided by another integer (denominator), separated by a horizontal line.
Here,
We can rewrite [tex]x^{-5/3}[/tex]as [tex](1/ x^{^(5/3)})[/tex].
The negative exponent in the numerator tells us that we need to move the term to the denominator of a fraction and change the sign of the exponent to make it positive. Similarly, the fractional exponent in the denominator indicates that we need to take the reciprocal of the term and change the sign of the exponent to make it positive.
Therefore, we can rewrite [tex]x^{-5/3}[/tex] as:
[tex](1/ x^{^(5/3)})[/tex]
or
[tex]x^{-5/3}[/tex] = [tex](1/ x^{^(5/3)})[/tex]
To know more about fraction,
https://brainly.com/question/24638688
#SPJ1
Complete question:
Which of the following is equivalent to [tex]x^{-5/3}[/tex]?
The volume of a rectangular prism is 5,890.625cm3 . if the height is 14.5 cm and the length is 25 cm, with is the value of the width ?
A. 16.25 cm B. 16.5 cm C. 16.75cm D. 16.97cm
Answer:
Step-by-step explanation:
The answer is A. 16.25cm.
Explanation:-
We know,
The Volume of Prism =height*width*length;
Here, In the question Height and length is given.
So We have to do a simple calculation to find,width=
(Vol of Prism)/Heigth*length;=> 5890.625/(14.5*25)
=>16.25 cm .
We don't need to worry about dimensions because all are in the same cm dimensions.
Read More :
brainly.com//prism
Answer:
A. 16.25 cm
Step-by-step explanation:
To solve for the volume of a rectangular prism, we would use the formula V = l·w·h, where:
"l" is the base length
"w" is the base width
"h" is the height of the prism
In this problem, we are given the volume, height, and length of the rectangular prism. That means we need to find the value of w, the base width. To do this, we plug our known values into the equation and solve for w.
5,890.625 = (14.5)(25)w
To get w by itself, we first divide each side of the equation by 14.5. Remember that when you divide a number by itself, they cancel out.
(5,890.625)/(14.5) = (14.5)(25)w/(14.5)
406.25 = (25)w
Next, we can divide each side of the equation by 25 to get our answer.
406.25/25 = (25)w/25
w = 16.25 cm
Triangle GFH has vertices G(2, –3), F(4, –1), and H(1, 1). The triangle is rotated 270° clockwise using the origin as the center of rotation. Which graph shows the rotated image?
On a coordinate plane, triangle G prime H prime F prime has points (negative 3, negative 2), (1, negative 1), (negative 1, negative 4).
On a coordinate plane, triangle G prime H prime F prime has points (3, 2), (negative 1, 1), (1, 4).
On a coordinate plane, triangle G prime H prime F prime has points (2, negative 3), (1, 1), (4, negative 1).
On a coordinate plane, triangle G prime H prime F prime has points (2, 3), (4, 1), (1, negative 1).
Check the picture below.
Answer:
b
Step-by-step explanation:
edge 2023
if a clock shows it is 3 o'clock, how could you describe the smaller angle made my the two hands of the clock? solve this problem any way you choose
The smaller angle made by the two hands of the clock at 3 o'clock is 90 degrees.
What is an angle?A figure known as an angle is created by two rays or line segments that meet at a place known as the vertex of the angle. The sides or legs of the angle are other names for the rays or line segments.
According to question:To determine the smaller angle made by the two hands of a clock when it is 3 o'clock, we can use the following formula:
angle = |(11/2) * m - 30h|
where:
m is the number of minutes past the hour (in this case, since it is 3 o'clock, m = 0)
h is the hour (in this case, h = 3)
By using this formula, we get:
angle = |(11/2) * 0 - 30(3)| = |0 - 90| = 90
Therefore, the smaller angle made by the two hands of the clock at 3 o'clock is 90 degrees.
To know more about angle visit:
https://brainly.com/question/28451077
#SPJ1
9 belongs to the set N
Answer:
9 belongs to set N, natural, whole, integer, rational, and real number
Step-by-step explanation:
* Natural number: use for counting
* Whole number: includes natural number and zero
* Integer : are whole numbers and their opposite
*Rational number:come from fraction, and their results can be positive integer
*Real number: includes all numbers
3^-1/2 x^1/2
express with radical signs instead of fractional exponents. rationalize the denominator.
please help
Answer:
[tex]\sqrt{x/3}[/tex]----------------------
Use the following identities:
[tex]a^{-b}=1/a^b[/tex][tex]a^{1/2}=\sqrt{a}[/tex][tex]a^bc^b=(ac)^b[/tex]Apply the identities to the given expression:
[tex]3^{-1/2}x^{1/2}=(3^{-1}x)^{1/2}=(x/3)^{1/2}=\sqrt{x/3}[/tex]In IXL I need help im bad :(
Answer:
Wilma will pay $23.44 total.
Step-by-step explanation:
Cost of sweater = (+) $24.49
Discount = (-) $5
Shipping cost = (+) $3.95
Solve:
24.49 - 5 = 19.49
19.49 + 3.95 = 23.44
Wilma will pay $23.44 total.
ASAP PLEASE
The histogram shows data collected about the number of passengers using city bus transportation at a specific time of day.
A histogram titled City Bus Transportation. The x-axis is labeled Number Of Passengers and has intervals of 1 to 10, 11 to 20, 21 to 30, 31 to 40, and 42 to 50. The y-axis is labeled Frequency and starts at 0 with tick marks every 1 units up to 9. There is a shaded bar for 1 to 10 that stops at 2, for 11 to 20 that stops at 4, for 21 to 30 that stops at 5, for 31 to 40 that stops at 6, and for 42 to 50 that stops at 3.
Which of the following data sets best represents what is displayed in the histogram?
1 (4, 5, 7, 8, 10, 12, 13, 15, 18, 21, 23, 28, 32, 34, 36, 40, 41, 41, 42, 42)
2 (4, 7, 11, 13, 14, 19, 22, 24, 26, 27, 29, 31, 33, 35, 36, 38, 40, 42, 42, 42)
3 (4, 5, 7, 8, 12, 13, 15, 18, 19, 21, 24, 25, 26, 28, 29, 30, 32, 33, 35, 42)
4 (4, 6, 11, 12, 16, 18, 21, 24, 25, 26, 28, 29, 30, 32, 35, 36, 38, 41, 41, 42)
Answer:
Step-by-step explanation:
After organizing the data, the researcher must present them so they can be understood by those who will benefit from reading the study. The most useful method of presenting the data is by constructing statistical charts and graphs. There are many different types of charts and graphs, and each one has a specific purpose.
This chapter explains how to organize data by constructing frequency distributions
and how to present the data by constructing charts and graphs. The charts and graphs
illustrated here are histograms, frequency polygons, ogives, pie graphs, Pareto charts,
and time series graphs. A graph that combines the characteristics of a frequency distribution and a histogram, called a stem and leaf plot, is also explained.
Section 2–2 Organizing Data 35
2–3
Objective
Organize data using
frequency
distributions.
1
2–2 Organizing Data
Suppose a researcher wished to do a study on the number of miles that the
employees of a large department store traveled to work each day. The researcher
first would have to collect the data by asking each employee the approximate distance the
store is from his or her home. When data are collected in original form, they are called
raw data. In this case, the data are
1 2 6 7 12 13 2 6 9 5
18 7 3 15 15 4 17 1 14 5
4 16 4 5 8 6 5 18 5 2
9 11 12 1 9 2 10 11 4 10
9 18 8 8 4 14 7 3 2 6
Since little information can be obtained from looking at raw data, the research
Answer:
c
Step-by-step explanation:
its ez
(PLEASE ANSWER BOTH)
1. What is the value of Angle X?
2. How do you know (What type of angle pairs are they)?
Answer:
angle x is 160
Step-by-step explanation:
180 - 20
The Question Is Inside Of The Picture
The percentage of sugar price per pound less than 64 cents is 50%
What percentage of sugar price per pound are less than 64 centsFrom the question, we have the following parameters that can be used in our computation:
Mean = 64
Standard deviation = 2
For sugar price per pound that are less than 64 cents, we have
z = (64 - 64)/2
z = 0
This is then represented as
Probability = (z < 0)
Using a graphing calculator, we have
Probability = 0.5
Express as percentage
Probability = 50%
Hence, the probability is 50%
Read mroe about z-scores at
brainly.com/question/25638875
#SPJ1
Given the circle below with secants GHI and KJI. If JI = 4, KJ = 10 and
HI = 5, find the length of GH. Round to the nearest tenth if necessary.
Answer:
GH = 6.2
Step-by-step explanation:
The entire graph of the function g is shown in the figure below.
Write the domain and range of g as intervals or unions of intervals.
domain=
range =
For the given function 'g':
domain = (-4, -2) ∪ (1, 3]
range = (-5, 4]
If the function is defined as f(x) = y, then the values of x for which the value of function exists, the set of that values is said to be the domain of the function f.
If the function is defined as f(x) = y, then the set of all possible values of the function that is the set of all possible values of y is said to be the range of the function f.
Here given the graph of 'g'.
From the graph we can see that for -4 < x < -2 and 1 < x [tex]\le[/tex] 3 the function has graph.
So the domain = (-4, -2) ∪ (1, 3]
And it is clear that the value of y lies between -5 < y [tex]\le[/tex] 4.
So the range = (-5, 4].
To know more about domain here
https://brainly.com/question/26098895
#SPJ1
Raman is watching the movie 4 times and he fislokw s the value wirh
Answer:learn how to spell :)
Step-by-step explanation:
Can someone help me please
here is the picture
The result of adding -4 (row 1) to row 3 is determined as (0 - 9 2)|12.
What is the result of the row multiplication?The resultant of the row multiplication in the Matrice is calculated by applying the following method;
row 1 in the given matrices = [1 2 1] | -5
To multiply row by -4, we will multiply each entity by 4 as shown below;
= -4(1 2 1) | -5
= (-4 -8 - 4) |20
To add the result to 3;
(-4 -8 - 4)|20 + (4 - 1 6) | -8
= (0 - 9 2)|12
Thus, the result of the row multiplication is determined by multiplying each entry in row 1, by - 4.
Learn more about row multiplication here: https://brainly.com/question/31531585
#SPJ1
The sales of a certain product after an initial release can be found by the equation s=12 sqrt (4t) + 10 , where s represents the total sales (in thousands) and t represents the time in weeks after release. Make a table of values, graph the function and use the graph to estimate the sales 12 weeks after release.
about $586,000
about $586
about $93
about $93,000
The sales 12 weeks after release is $586,000 . Option A is the correct answer.
To create a table of values, we can plug in different values of t and find the corresponding values of s:
t s
0 10
1 19.882
2 26.248
3 31.177
4 35.064
5 38.185
6 40.731
7 42.837
8 44.6
9 46.095
10 47.384
11 48.508
12 49.498
To graph the function, we can plot the values from the table on a coordinate plane. The horizontal axis represents time in weeks, and the vertical axis represents sales in thousands of units. The resulting graph is a curve that starts at (0,10) and increases as t increases.
To estimate the sales 12 weeks after release, we can look at the graph and see that the corresponding value of s is around 49.5 thousand units. Therefore, the answer is about $586,000 (49.5 x 1000 x 12). Option A is the correct answer.
To learn more about equation click on,
https://brainly.com/question/12972796
#SPJ1
Find the slope of the tangent to f(x) = x^2 at the point (-2,4).
Answer:
f'(x) = 2x, so f'(-2) = 2(-2) = -4.
A worker completes a job in a certain number of hours. The standard time allowed for the job is 10 hours, and the hourly rate of wages is Re. 1. The worker earns at the 50% rate a bonus of Rs. 2 under Halsey Plan. Ascertain his total wages under the Rowan Premium Plan.
Making an Informed Decision Using the Quantitative Reasoning Process
Step 1: Understand the Problem
Keep the Old Car or Buy a Used Car
Manny is an online student who currently owns an older car that is fully paid for. He drives, on average, 190 miles per week to commute to work. With gas prices currently at $
2.9 per gallon, he is considering buying a more fuel-efficient car, and wants to know if it would be a good financial decision.
The old car Manny owns currently gets 18 miles per gallon for average fuel efficiency. It has been a great vehicle, but with its age, it needs repairs and maintenance that average $
770 per year (as long as nothing serious goes wrong).
The newer, more fuel-efficient car that he is looking at to purchase will cost a total of $
6,500 over a three-year loan process. This car gets 32 miles per gallon and would only require an average of $
10 per month for general maintenance. To help make a decision, Manny wants to calculate the total cost for each scenario over three years. He decides to use the quantitative reasoning process to do this.
Step 2: Identify variables and assumptions
Manny has identified some key variables for his situation. Select the two variables that should be removed from his list because they do not apply to the current situation.
Manny’s graduation date from elementary school.
The cost of repairs on the old car.
The cost of gas.
The number of miles Manny drives each week.
Manny’s wages.
The loan cost of the used car.
The year Manny was born.
The cost of the used car.
Manny has also made a list of key assumptions he will be using to make his decision. Check the boxes for the three assumptions from his list that are not useful in this scenario.
Manny assumes that nothing will go seriously wrong with either car during this three year period.
Manny assumes the loan period will be 3 years.
Manny assumes gas costs will remain about the same over the three years.
Manny assumes he will continue to go running in the mornings every weekday for the next three years.
Manny assumes there are 52 weeks in a year.
Manny assumes his lunches will continue to cost about the same for the next three years.
Manny assumes he will continue to drive about the same number of miles each week over this three year period.
Manny assumes he will still like spinach at the end of three years no matter which choice he makes.
Step 3: Apply Quantitative Tools
Use computational and algebraic tools to quantify the total costs (gas, maintenance/repairs, purchase price) for each scenario over the three years.
Round your answers to the nearest dollar.
Scenario
Total Cost for Three Years
Keep the old car
$
Number
Buy the fuel-efficient used car
$
Number
Step 4: Make an Informed Decision
Based on the information presented what do think Manny should decide?
Option #1: Keep the old car
Option #2: Buy the fuel-efficient used car
Option #
1
Step 5: Evaluate Your Reasoning
Manny plans to start looking at cars and will evaluate his reasoning before he makes a purchase.
( need help on the assignment)
I need help to get the residual plot from this data 13.8 1.42 16.7 3.21 0.7 1.11 18 4 16.7 3.21 20 4 18 3.8 19.5 3.78 21.9 3.69 0.7 1.11
Answer:
To create a residual plot, you need to first fit a model to the data. Without any information about the problem you are trying to solve or the model you are fitting, I will assume that you are trying to fit a linear regression model to these data points.
First, you would need to find the equation of the line that best fits the data using a regression analysis software or by hand. Let's assume that the equation of the line is:
y = 0.2x + 2.5
where y is the response variable (dependent variable) and x is the predictor variable (independent variable).
Next, you would calculate the predicted values of y (i.e., the values that the model predicts) for each value of x in your dataset, using the equation of the line. For example, for the first data point (13.8, 1.42), the predicted value of y would be:
y_predicted = 0.2 * 13.8 + 2.5 = 5.06
The residual for this data point would be the difference between the actual value of y and the predicted value of y:
residual = 1.42 - 5.06 = -3.64
You would repeat this process for each data point in your dataset, to get a list of residuals.
Given that f (x) = StartFraction 120 Over x squared EndFraction , What is the domain of the function f ? a. only positive integers c. only negative integers b. All non zero real numbers. d. All real numbers including zero
For the function "f (x) = 120/x²", the domain of the function "f" is (b) All non zero real numbers.
The "Domain" of a function is the set of all possible "input-values" for which the function is defined. In this case, the function is defined as:
f (x) = 120/x²
The only restriction on the input values is that the denominator cannot be equal to zero, because division by zero is undefined.
So, the domain of the function f is all non-zero real numbers.
Therefore, the correct option is (b): All non-zero real numbers.
Learn more about Function here
https://brainly.com/question/29109048
#SPJ1
The given question is incomplete, the complete question is
Given that f (x) = 120/x², What is the domain of the function f ?
(a) only positive integers,
(b) All non zero real numbers,
(c) only negative integers,
(d) All real numbers including zero.
Can yall help me with this pls
Answer:
x=6.4
Step-by-step explanation:
2/3.2 = 4/x
2x=4(3.2)
2x=12.8
x=6.4
A business manufactures and sell laptops.Each laptop is sold for R14000.the fixed monthly cost is R32000 and it cost R9000 to manufacture each laptop.let L be number of laptops manufactured and sold per monthly
The total cost equation can be written as:
Total Cost = 32000 + 9000L
What is total cost?
Total cost refers to the complete amount of money or resources that are required to produce or obtain a particular good or service. It includes all of the expenses associated with production, such as labor costs, materials costs, overhead costs, and any other costs necessary to manufacture or acquire the product.
The total cost equation can be expressed as:
Total Cost = Fixed Cost + Variable Cost
where Fixed Cost is the cost that does not vary with the number of laptops manufactured and sold, and Variable Cost is the cost that depends on the number of laptops manufactured and sold.
In this case, the fixed monthly cost is $32,000 and it does not depend on the number of laptops manufactured and sold. The variable cost is the cost of manufacturing each laptop, which is $9,000 per laptop.
If L is the number of laptops manufactured and sold per month, then the variable cost can be expressed as 9000L. Therefore, the total cost equation can be written as:
Total Cost = 32000 + 9000L
This equation represents the total cost of manufacturing and selling L laptops per month. The fixed cost of $32,000 is added to the variable cost of $9,000 per laptop multiplied by the number of laptops sold, L, to obtain the total cost.
To learn more about total cost visit the link:
https://brainly.com/question/29509552
#SPJ9
Complete question: A business manufactures and sell laptops. Each laptop is sold for 14000.the fixed monthly cost is 32000 and it cost 9000 to manufacture each laptop. let L be number of laptops manufactured and sold per monthly. What is the total cost equation?
Which of the following statements about transportation in the United States is NOT true?
A. Most Americans commute to work in a personally owned vehicle.
B. Most Americans who commute to work in car's drive alone.
C. Americans spend more income on transportation than anything else except
housing.
D. The cost of gasoline is higher in the U.S. than anywhere else in the world.
Answer: D
Step-by-step explanation:
The answer is D. The cost of gasoline is higher in the U.S. than anywhere else in the world.
According to the U.S. Energy Information Administration, the average price of a gallon of regular unleaded gasoline in the United States was $3.53 on March 8, 2023. This is higher than the average price of gasoline in many other countries, including Canada ($1.56), Mexico ($1.97), and the United Kingdom ($1.73). However, the cost of gasoline in the United States is lower than the average price in some countries, such as Norway ($6.62), Sweden ($5.62), and Denmark ($5.51).
Here are the facts about the other statements:
A. Most Americans commute to work in a personally owned vehicle. According to the U.S. Census Bureau, in 2019, 77.4% of workers commuted to work by driving alone.
B. Most Americans who commute to work in car's drive alone. According to the U.S. Census Bureau, in 2019, 77.4% of workers who commuted to work by driving did so alone.
C. Americans spend more income on transportation than anything else except housing. According to the U.S. Bureau of Labor Statistics, in 2020, Americans spent an average of $10,564 on transportation, more than any other category except housing ($16,916).
Can someone help me in here please
The addition of the two matrix is [34 -12 -36 -18 58]
[-42 -8 16 30 8 ]
[ 24 34 4 34 23]
[-12 -32 -12 -42 -52]
What is the matrix addition?The addition of the matrix is calculated as follows;
The result to 4 multiplied by G is calculated as;
4[G] = [32 -20 -32 -8 40]
[-24 -28 4 36 8 ]
[ 16 24 12 28 20]
[-16 -12 0 -40 -36]
2[F] = [2 8 -4 -10 18]
[-18 20 12 -6 0 ]
[ 8 10 -8 6 3 ]
[4 -20 -12 -2 -16]
The addition of the two matrix is calculated as follows;
4[G] + 2[F] = [34 -12 -36 -18 58]
[-42 -8 16 30 8 ]
[ 24 34 4 34 23]
[-12 -32 -12 -42 -52]
Learn more about matrix here: https://brainly.com/question/2456804
#SPJ1
For any positive values x and y, f(xy) = f(x) + f(y). f(1/2021) = 1.
Find f(2021).
I will give BRAINLIEST to correct answer.
The vertices of AABC are A (-3, -6), B (-3,5), and C (5,5).
What is the area of AABC?
Answer:
44 units²-----------------------------
AB is vertical with same x-coordinates, and BC is horizontal with same y-coordinates.
Hence this is a right triangle.
Its area is:
A = 1/2 × AB × BCA = 1/2(5 - (-6))(5 - (-3)) = 1/2(11)(8) = 44 units²Researchers are analyzing the total annual cost for the top ranked universities. They need to display the data in a way that is helpful
for relaying information regarding the data.
Identify the advantage of using a dotplot (choose one) :
A- Easily identify outliers
B- Easily determine the total number of data points for larger data sets
C- Cannot determine the minimum or maximum
D-Cannot identify the exact median
One advantage of using a dot plot is that it makes it easy to identify outliers. Option A is correct.
An outlier is a data point that is significantly different from the others in the data set, either in terms of its value or its position within the range of values. In a dot plot, outliers are represented by individual dots that are far away from the other dots, either above or below them.
By looking at the dot plot, researchers can quickly identify any outliers and investigate them further to determine why they are different and whether they should be included or excluded from the analysis.
Hence, A. is the correct option.
To know more about dot plot here
https://brainly.com/question/21862696
#SPJ1
