Answer:
A magic number is a number of nucleons (either protons or neutrons, individually) that form complete bands within the atomic nucleus. As a result, atomic nuclei with a magic number of protons or neutrons are significantly more persistent than other nuclei.
How many atoms are in 2.17 moles of strontium?
Answer: I think 82.46
Explanation: The atomic number for strontium, or Sr on the periodic table, is 38. With knowing the atomic number, I multiplied that by the number of moles given.
38 × 2.17 = 82.46
I hope this helps!!
The number of atoms present in 2.17 moles of strontium are [tex]1.306774 \times 10^{24}[/tex].
An atom is the smallest indivisible unit of a chemical element that retains the chemical properties of that element. It is the basic building block of matter.
To determine the number of atoms in a given number of moles, we can use Avogadro's number, which is approximately [tex]6.022 \times 10 ^{24}[/tex] atoms per mole.
In this case, we have 2.17 moles of strontium. To find the number of atoms, we multiply the number of moles by Avogadro's number:
Number of atoms = [tex]2.17 moles\times6.022\times 10^{23}[/tex][tex]atoms/mole[/tex]
On calculating this expression:
Number of atoms =[tex]1.306774 \times 10^{24}[/tex]
Therefore, there are approximately [tex]1.306774 \times 10^{24}[/tex] atoms in 2.17 moles of strontium.
Learn more about atom here:
https://brainly.com/question/1566330
#SPJ2
In a recent study, 50 males used a new weight-loss supplement, and 37 of them experienced weight loss after two weeks: In the same study, 20 females used
the same supplement, and 13 of them experienced weight loss after two weeks.
Fill in the blanks below to make the most reasonable statement possible.
The new weight-loss supplement was less effective on (Choose one) in the study. That is because only % of them lost
weight after two weeks, whereas % of the (Choose one) lost weight after two weeks.
Answer:
The new weight-loss supplement was less effective on females in the study. That is because only 65% of them lost weight after two weeks, whereas 74% of the males lost weight after two weeks.
Explanation:
37 out of 50 males lost weight after two weeks, so 74% of males lost weight ( (37 · 2)/(50 · 2) ). 13 out of 20 females lost weight after two weeks, so 65% of females lost weight ( (13 · 5)/(20 · 5) ). This means the supplement was less effective on females because males had a higher percentage of losing weight.
Hope this helps !! :D
At ground level, how are rain and hail similar?
They are forms of water in its liquid state.
They occur when the temperature is below freezing.
They can occur when the air is hot and moist.
They are most common in the winter.
They are forms of water in its liquid state at ground level. Thus, the correct option is A.
What is hailstrom?Precipitation, or water in the atmosphere, forms hail. When water drops freeze together in the chilly higher parts of thunderstorm clouds, hail is the result.
When a water droplet is lifted by an updraft from a thunderstorm over the freezing point of the atmosphere, hail is created. The super-cooled water or water vapor that the frozen water droplet accretes later freezes when it comes into touch with it. A hailstone grows as a result of this process.
When water vapor from the atmosphere condenses into liquid water droplets, they become heavy enough to fall as a result of gravity.
For more information regarding hailstrom, visit:
https://brainly.com/question/26551945
#SPJ1
Answer:A
Explanation:
.
The absolute molar entropies of O2 and N2 are 205 J K-1 mol -1 and 192 J K-1 mol-1, respectively, at 25°C. What is the entropy of a mixture of 2.4 moles of 02 and 9.2 moles of N2 at the same temperature and pressure?
The entropy of a mixture is 96.44J K-1 mol -1
The absolute molar entropies of O2= 205 J K-1 mol -1 The absolute molar entropies of N2=192 J K-1 mol -1 Moles of O2 present(m)=2.4Moles of N2 present(n)=9.2The formula for calculating the entropy of a mixture-
Δ[tex]S_{mix} =[/tex][tex]-nR(X_{O2} ln_{XO2} +X_{N2} lnX_{N2})[/tex]
X=mole fraction
total no. of moles(t)=m + n
=2.4+9.2
=11.6 moles
now substituting the values-
entropy of mix=-11.6R(2.4/11.6 + 9.2/11.6)
=11.6R
( R=8.314 ) =11.6×8.314
=96.44J K-1 mol -1
hence, The entropy of a mixture is 96.44J K-1 mol -1
learn more about entropy here:
https://brainly.com/question/2748166
#SPJ10
Which of the following is a simple design model that uses the concepts define, optimize, and develop solutions iteratively and in any order?
A. Infused Design
B. FORFLOW
C. Munich Procedural Model
D. Next Generation Design Model
The Munich Procedural Model is a simple design model that uses the concepts define, optimize, and develop solutions iteratively and in any order. C
What is the Munich procedural design?The Munich procedural model is a design that illustrates several opportunities regarding the order in which design process and stages beyond mere iteration should take.
A procedural model commonly used for development is the V-model.
Hence, the Munich Procedural Model is a simple design model that uses the concepts define, optimize, and develop solutions iteratively and in any order.
Learn more about procedural designs here:
https://brainly.com/question/22654163
#SPJ1
Convert -145 °F to kelvins. Round to the nearest whole number.
Answer:
175K
Explanation:
(-145°F − 32) × 5/9 + 273.15 = 174.817K
174.817 ---> 175 (Rounded to whole number/ ones place)
1. For CCl4, upload a photo including the following: (1) work arriving at total # valence electrons
(2) hand drawn Lewis structure (3) molecular model (4) signature(s) and (5) date.
Work arriving at total valence electrons are 24
The valence electron is an electron in the outer shell associated with an atom, and that can participate in the formation of a chemical bond
For a main-group element, a valence electron can exist only in the outermost electron shell; for a transition metal, a valence electron can also be in an inner shell.
Lewis structures, also known as Lewis dot formulas, Lewis dot structures, electron dot structures, or Lewis electron dot structures (LEDS), are diagrams that show the bonding between atoms of a molecule, as well as the lone pairs of electrons that may exist in the molecule.
Calculating the work arrival at total valence electrons
We know 1 bond contains
2 valence electrons
Here CCl4 contains 4 bonds that is 8 valence electrons
Therefore ,
Total valence electrons are 32
Now valence electrons remain after bond formation =
32 - 8
=24 valence electrons
A molecular model is a physical model of an atomistic system that represents molecules and their processes
Molecular image and lewis hand drawn structure is as shown below
Learn more about lewis structure here
https://brainly.com/question/6224949
#SPJ10
elemental phosphorus occurs as tetratomic molecules, p4. What mass in grams of chlorine gas is need to react completely with 455g of phosphorus to form phosphorus pentachloride?
P₄ + 10Cl₂ → 4PCl₅
mol P₄ = 455 : 123.895 g/mol = 3.672
mol Cl₂ = 10 x 3.672 = 36.72
mass Cl₂ = 36.72 x 71 g/mol = 2607.12 g
diffrentiate between equation and chemical formula
A chemical equation is the symbolic representation of a chemical reaction in the form of symbols and formulae, wherein the reactant entities are given on the left-hand side and the product entities on the right-hand side with a plus sign between the entities in both the reactants and the products and an arrow that points towards the products, and shows the direction of the reaction. The coefficients next to the symbols and formulae of entities are the absolute values of the stoichiometric numbers. The first chemical equation was diagrammed by Jeen Beguin in 1615.
A chemical formula is a way of presenting information about the chemical proportions of atoms that constitute a particular chemical compound or molecule, using chemical element symbols, numbers, and sometimes also other symbols, such as parentheses, dashes, brackets, commas and plus and minus signs.
Hope this helps you!
Answer:
Explanation:
Chemical Formula:Represents the composition of a substance or compoundUses symbols and subscripts to indicate the types and numbers of atoms in a moleculeExample: H2O represents the chemical formula for waterChemical Equation:Represents a chemical reactionShows the reactants and products involved in the reactionUses chemical formulas and symbolsReactants are on the left side, products on the right side, separated by an arrowExample: 2H2 + O2 → 2H2O represents the reaction of hydrogen gas and oxygen gas to form waterIn summary:Formula describes composition, equation describes a reactionFormula uses subscripts for atom count, equation uses symbols and arrowsHow many moles are in a gas with a temperature of 21°C, pressure of 1,351 mmHg and a volume of 2,000 mL
Answer:
.147 moles
Explanation:
PV = n RT choose the correct "R" to be 62.364 L torr /(K-mol)
T needs to be in K (so add 273.15)
1351 torr * 2 L = n * 62.364 * (21 + 273.15 )
solve for n = .147 moles
2022
DP Chemistry Practical Guide
Dission Questions
Why are the burette and the pipette rinsed with the solution with which these are filled?
Answer:
OOO
Explanation:
OOOOOO
What is the concentration of acetic acid if three 65.0 mL samples of actic acid were neutralized with 16.8 mL, 18.2 mL, and 17.35 mL of 0.5.00 M KOH. (Hint: KOH and acetic acid react in a 1 to 1 mole ratio)
M₁V₁=M₂V₂
65 x M₁ = 16.8 x 0.5
M₁ = 0.129
65 x M₁ = 18.2 x 0.5
M₁ = 0.14
65 x M₁ = 17.35 x 0.5
M₁ = 0.133
Average = 0.129 + 0.14 + 0.133 = 0.134 M
What is the isomer of a compound with an empirical formula of C₂H₆O₂?
Answer:
An isomer is a molecule with the same molecular formula as another molecule, but with a different structure. Isomers contain the same number of atoms of each element, but have different arrangements of their atoms. Isomers do not necessarily share similar properties, unless they also have the same functional groups.
Help please!
A new element with atomic number 116 was discovered in 2000. In 2012 it was named livermorium, Lv. Although Lv is radioactive and short-lived, its chemical properties and reactivity should follow periodic trends.
a. Determine the electron configuration for the valence electrons of Lv in the ground state. (2 pts)
b. It has been suggested that Lv can form a 4+ ion. Identify what would be the electron configuration for the valence electrons for the Lv4+ ion? (1 point)
The electronic configuration of Lv element is [tex]5f^{14} 6d^{10} 7s^2 7p^4[/tex].
The electronic configuration of [tex]Lv^{+4}[/tex] is [tex]5f^{14} 6d^{10} 7s^2[/tex] .
What is electronic configuration?Electronic configuration, also called electronic structure, is the arrangement of electrons in energy levels around an atomic nucleus.
And also the possible union with hydrogen can give two possible compounds:
[tex]LvH_2 \;or LvH_4[/tex]
This is because the Livermorio compound can have two different oxidation states with the values 2 and 4. When reacting with the hydrogen that its charge is +1, these would be the two possible equations of a client to the different oxidation states with the ones that might react Lv.
It is a synthetic chemical compound and its number in the periodic table is 116.
Learn more about electronic configuration here:
https://brainly.com/question/13497372
#SPJ1
#1
Atomic no=116
Lies ahead of Renedium -86
Electronic configuration
[Rn]5f¹⁴6d¹⁰7s²7p⁴#2
Lv^4+ means 4 electrons donated
So it gets removed from p orbital
[Rn]5f¹⁴6d¹⁰7s²
what's the name of the compound?
A tank holds 22.1 L of oxygen ( O2 ) at a pressure of 18.0 atm . What is the final volume, in liters, of this gas when it is released at a pressure of 2.90 atm with no change in temperature and amount of gas.
The final volume of gas will be 137.17L .
According to ideal gas equation , PV=nRT , where P is pressure of gas , V is volume of gas , n is moles of gas , R is universal gas constant and T is the temprature of gas.
Now , according to the que at initial and final stage the temprature and amount of gas stays constant , so we would simply equate the initial PV to the final PV.
⇒[tex]P_{i} V_{i} = P_{f} V_{f} \\[/tex]
where [tex]P_{i}[/tex] ans [tex]V_{i}[/tex] are the initial pressure and volume of the gas and [tex]P_{f}[/tex] and [tex]V_{f}[/tex] are the final pressure and volume of the gas .
Here we have to find final volume of gas .
So , putting all values in above eq we get
18 x 22.1 = 2.9 x [tex]V_{f}[/tex]
⇒ [tex]V_{f}[/tex] = 137.17 L
Learn more about ideal gas equation here https://brainly.com/question/25290815
#SPJ10
In the following half equation, which is the oxidizing agent? How & why?
NO3- (aq) + 4H+ (aq) + 3e- —> NO (g) + 2H2O
A) NO3-
B) H+
C) e-
D) NO
E) H2O
Answer: A
Explanation:
Oxidation is the process through which electrons are gained. This indicates that only organisms on the electron side have the potential to be oxidizing agents. c, d, and e are, by definition, eliminated.
We also know that H+ is in the +1 oxidation state. The same is true for 'H' in H2O... it doesn't change oxidation states
Therefore, the answer must be a) nitrate
Explain how they would make solutions of the sulfuric acid at five different concentrations
The sulfuric acid can be constituted into different concentrations using distilled water as a diluent.
What is dilution of acid?Dilution of acid is defined as the decrease in the concentration of an acid using water.
For sulfuric acid to be diluted, it is slowly added to distilled water using the following guidelines:
Add 150 ml of water to the beaker and add the desired amount of acid. This will give a diluted concentration of the given acid.Learn more about acid here:
https://brainly.com/question/25148363
#SPJ1
acid base and solutions
The Arrhenius definition of an acid states that an acid ionizes or dissociates to from hydroxide ions in solution.
What is the Arrhenius definition of acid?The definition of solutions was more given by the traditional scientist in smart solutions, which are natural solutions, like substances that - easy solutions, aqueous like bases.
In this case, Arrhenius definition of an acid states that an acid ionizes or dissociates to from hydroxide ions in solution.
See more about Arrhenius definition at brainly.com/question/13184258
#SPJ1
Polyester and Nylon are examples of synthetic materials called polymers.
A. True
B. False
Answer:
true is correct
Polyester and Nylon are examples of synthetic materials called polymers. This statement is True.
Polymers are large molecules composed of repeating subunits called monomers, which are chemically bonded together. In the case of polyester, it is made from a polymer called polyethylene terephthalate (PET), while Nylon is made from polyamide monomers. These polymers are created through polymerization processes that combine smaller molecules to form long chains.
Synthetic polymers like polyester and nylon are widely used in various applications due to their desirable properties, such as strength, durability, and resistance to chemicals and moisture.
Learn more about Polymers, here:
https://brainly.com/question/8930717
#SPJ3
What is one advantage of wind and hydroelectric power?
A. They are effective in any type of environment.
B. Neither harms wildlife.
C. Neither produces pollutants.
D. Both are inexpensive.
What is one advantage of wind and hydroelectric power?
A. They are effective in any type of environment.
B. Neither harms wildlife.
C. Neither produces pollutants.
D. Both are inexpensive.
Explanation:
one of the qnswer is flood control, irrigation support, and clean drinking water
Which sequence represents the relationship between temperature and volume as explained by the kinetic-molecular
theory?
higher temperature → less kinetic energy
higher temperature → more kinetic energy→more space between particles → higher volume
less space between particles → higher volume
higher temperature → more kinetic energy less space between particles → lower volume
higher temperature → less kinetic energy→more space between particles lower volume
The correct sequence is higher temperature→ more kinetic energy→ more space between particles→ higher volume.
According to the postulates of Kinetic gas theory:
Postulate 1: It states that the average kinetic energy of gas particles is proportional to the absolute temperature of the gas.
Which states that the higher temperature, the higher the kinetic energy of the molecules, which is the start of the sequence of the relationship between temperature and volume.
Postulate 2: Average kinetic energy is proportional to the square of the speed, it shows that at higher the kinetic energy the faster the molecules will move.
Postulate 3: As the particles move faster, the particles will collide more frequently so they will move away from each other, occupying more space.
Postulate 4: More space between the molecules results in more volume.
So, the complete and correct sequence is higher temperature → higher kinetic energy (higher speed) → more space → more volume.
Learn more about the Kinetic Gas Theory here:
https://brainly.com/question/7563496
#SPJ10
Franklin Roosevelt promised the American people a "new deal," a pledge he made actually before he was elected, at the Democratic National Convention in 1932.
The New Deal program was to help the American economy recover from the Great Depression.
Who was Franklin Roosevelt?Franklin Delano Roosevelt was an American politician and attorney who served as the 32nd president of the United States from 1933 until his death in 1945.
Roosevelt promised the American people a "New Deal" if he was elected president in 1932. The goal of this New Deal program was to help the American economy to recover from the Great Depression.
Roosevelt's deal was based on providing economic relief to citizens, reforming institutions that failed during the early 1930's, and helping the overall economy to recover. This popular program lead FDR to be elected president 4 times.
Learn more about Franklin Roosevelt here:
https://brainly.com/question/8333337
#SPJ1
You are watching tv and you see something on the corner of your eye what do you do and you're home alone
Talk to the doctor if you see something in the corner of your eye.
What is a visual hallucination?Visual hallucinations involve seeing things that aren't there.
It's called a visual hallucination, and it can seem like your mind is playing tricks on you. Beyond being scary or stressful, it's also usually a sign that something else is going on.
So if it's happening to you, talk to your doctor. That's the first step toward getting better.
Learn more about visual hallucinations here:
https://brainly.com/question/23288916
#SPJ1
If you had 6 mol of oxygen and 12 mol of mercury, what would be the limiting reactant? show your work
The limiting reactant between the reaction of 6 moles of oxygen and 12 moles of mercury is mercury (Hg)
Balanced equation4Hg + O₂ —> 2Hg₂O
From the balanced equation above,
4 moles of Hg reacted with 1 mole of O₂
How to determine the limiting reactantFrom the balanced equation above,
4 moles of Hg reacted with 1 mole of O₂
Therefore,
12 moles of Hg will react with = 12 / 4 = 3 moles of O₂
From the above calculation, we can see that only 3 moles of O₂ out of 6 moles given is required to react completely with 12 moles of Hg.
Thus, Hg is the limiting reactant and O₂ is the excess reactant .
Learn more about stoichiometry:
https://brainly.com/question/14735801
#SPJ1
Explain the term 'end point'?
What do you mean by a 1.0 M solution?
Answer:
According to me end point is the end of a reaction
examples of molecular compound
Answer:
Molecular compounds are inorganic compounds that take the form of discrete molecules. Examples include such familiar substances as water (H2O) and carbon dioxide (CO2). These compounds are very different from ionic compounds like sodium chloride (NaCl).
Aryan want to deposit silver on an iron spoon using silver nitrate as electrolyte. Which terminal of the battery he should connect the spoon? What material should the other electrode be made of?
Silver from the anode gets dissolved to reach the cathode, where the spoon will be plated.
What is electroplating?Electroplating is a way of electrolysis, where a thin layer of metal is used to plate a determined object. It is a kinda process to purify a material you want.
The anode contains the metal you want to plate with, in this case, the Ag.
The anode contains the half-reaction of oxidation so:
Ag(s) → Ag ⁺ (aq) + e⁻
In the cathode, you have the spoon, which it takes place the half-reaction of reduction:
Ag ⁺ (aq) + e⁻ → Ag(s)
The electrolytic cell, where the redox reaction takes place, must be filled with a AgNO₃ solution.
Silver from the anode gets dissolved to reach the cathode, where the spoon will be plated.
Learn more about the electroplating here:
https://brainly.com/question/20112817
#SPJ1
1) Consider this row in the periodic table. What changes can you predict based on what information is provided by the boxes for each element?
A) The elements change from solids to gases and the valence electrons decrease in number.
B) As you move across the row, the number of electrons increases and reactivity also increases.
C) They have different atomic numbers and mass numbers; they have the same number of valence electrons.
D) Both the atomic numbers and the mass numbers increase; the least reactive element is in the last box.
USA test prep question
Answer:
B) As you move across the row, the number of electrons increases and reactivity also increases.
Explanation:
The periodic table is arranged in a way that if you go across a period, the number of protons, neutrons, and electrons in an element increases. In terms of reactivity, the most reactive elements are the ones which have a high electronegativity. The electronegativity of the elements increases as you travel to the right and upwards on the periodic table.
M1 = 3M M2 = 1.25M V1 = V1=.125L unkown What is V2?
0.3 L is the final volume when M₁ = 3 M, V₁ = 0.125L, M₂ = 1.25M.
What is volume?The amount of space occupied by a three-dimensional figure as measured in cubic units.
Given data:
M₁ = 3 M
V₁ = 0.125L
M₂ = 1.25M
V₂ = ?
Solution:
M₁V₁ = M₂V₂
3 M × 0.125L = 1.25M × V₂
V₂ = 0.3 L
Hence, 0.3 L is the final volume.
Learn more about volume here:
https://brainly.com/question/15576659
#SPJ1
