Draw all possible lewis structures (including resonance structures for methyl azide (ch3n3 using lewis structure rules. One or more of your structures may seem unstable or unlikely; include them in your answer as long as they do not violate lewis structure rules. For each resonance structure, assign formal charges to all atoms that have formal charge. Draw all possible lewis dot structure for methyl azide. Include all hydrogen atoms and nonbonding electrons. Show the formal charges of all atoms

The correct answer is therefore A, -1.66 V.

The given information includes the standard reduction potential of the half-reaction:

Ag(aq) + e- → Ag(s) E° = +0.80 V

We can use this information along with the standard cell potential equation to find the standard reduction potential of the half-reaction:

E°cell = E°reduction + E°oxidation

where E°cell is the standard cell potential, E°reduction is the reduction potential for the half-reaction being reduced, and E°oxidation is the oxidation potential for the half-reaction being oxidized.

In this case, the two half-reactions involved are:

M3+(aq) + 3e- → M(s) (reduction)

3Ag(aq) → 3Ag+(aq) + 3e- (oxidation)

The reduction half-reaction needs to be flipped and its potential sign changed to obtain the oxidation potential:

M(s) → M3+(aq) + 3e- (oxidation)

The standard cell potential is the difference between the reduction and oxidation potentials:

E°cell = E°reduction + E°oxidation

E°cell = E°(M3+(aq) + 3e- → M(s)) + E°(M(s) → M3+(aq) + 3e-)

E°cell = E°(M(s) → M3+(aq) + 3e-) + (-E°(3Ag(aq) → 3Ag+(aq) + 3e-))

E°cell = E°(M(s) → M3+(aq) + 3e-) - E°(Ag(aq) → Ag(s))

E°cell = E°(M3+(aq) + 3e- → M(s)) - E°(Ag(aq) → Ag(s))

E°cell = -2.46 V - 0.80 V = -3.26 V

Therefore, the standard reduction potential for the half-reaction M3+(aq) + 3e- → M(s) is:

E°(M3+(aq) + 3e- → M(s)) = E°cell + E°(Ag(aq) → Ag(s))

E°(M3+(aq) + 3e- → M(s)) = -3.26 V + 0.80 V = -2.46 V

The correct answer is therefore A, -1.66 V.

learn more about reduction potential here

https://brainly.com/question/20040177

#SPJ1

Answer: Look at the image I attached - I drew what you should write.

The hydroxide concentration of the LiOH solution is 0.000016 M.

We know that:

pOH = -log[OH-]

We can rearrange this equation to solve for [OH-]:

[OH-] = 10^(-pOH)

Substituting the given pOH value of 4.80, we get:

[OH-] = 10^(-4.80)

[OH-] = 1.58 × 10^(-5)

Rounding to two decimal places, the hydroxide concentration of the LiOH solution is:

[OH-] = 0.000016 (rounded to two decimal places)

Therefore, the hydroxide concentration of the LiOH solution is 0.000016 M.

To know more about hydroxide concentration refer here:

https://brainly.com/question/29286376

#SPJ11

It is not enough to just know the mass of each reactant to determine the limiting reagent in a chemical reaction. The limiting reagent is the reactant that gets completely consumed during a chemical reaction, which limits the amount of product that can be formed.

To determine the limiting reagent, you need to compare the amount (in moles) of each reactant present, rather than just the mass. This is because different reactants have different molar masses, and therefore the same mass of two different reactants would have different numbers of moles.

Once you have determined the amount (in moles) of each reactant present, you can use stoichiometry to calculate how much product can be formed from each reactant. The reactant that produces the smallest amount of product is the limiting reagent.

To know more about the Reaction, here

https://brainly.com/question/30324543

#SPJ1

a. The empirical formula of the compound is [tex]CH_2O.[/tex] b. Moles of oxygen is 3.344 mol and c. The molecular formula of the compound is [tex]C_6H_12O_6[/tex].

To determine the empirical formula of the compound:

Convert the mass of each element to moles using its molar mass:

Moles of carbon = 48.38 g / 12.011 g/mol = 4.030 mol

Moles of hydrogen = 6.74 g / 1.008 g/mol = 6.690 mol

Moles of oxygen = 53.5 g / 15.999 g/mol = 3.344 mol

Divide each number of moles by the smallest number of moles to get the simplest whole-number ratio of atoms:

Carbon: 4.030 mol / 3.344 mol = 1.205 ≈ 1

Hydrogen: 6.690 mol / 3.344 mol = 1.999 ≈ 2

Oxygen: 3.344 mol / 3.344 mol = 1

Therefore, the empirical formula of the compound is [tex]CH_2O.[/tex]

To determine the molecular formula of the compound:

Calculate the empirical formula mass:

Mass of  [tex]CH_2O.[/tex] = 12.011 g/mol + 2(1.008 g/mol) + 15.999 g/mol = 30.026 g/mol

Empirical formula mass x n = Molar mass

n = Molar mass / Empirical formula mass = 180.15 g/mol / 30.026 g/mol = 6.000

Multiply each subscript in the empirical formula by n to get the molecular formula:

Molecular formula = [tex](CH_2O)_6[/tex] =  [tex]C_6H_12O_6[/tex]

Therefore, the molecular formula of the compound is  [tex]C_6H_12O_6[/tex]

Learn more about empirical formula Visit: brainly.com/question/1439914

#SPJ4

The number of moles of undissolved NaCl in the solution is 0.22 mol.

The number of moles of undissolved salt is calculated as;

mass of NaCl dissolved = volume of solution x solubility

volume = 100 cm³ = 100/1000 dm³ = 0.1 dm³

mass of NaCl dissolved = 0.1 dm³ x 9 mol/dm³

mass of NaCl dissolved = 0.9 mol

So, 0.9 moles of NaCl dissolved in the solution.

moles of undissolved NaCl = total moles of NaCl - moles of dissolved NaCl

molar mass of NaCl = 23 g/mol + 35.5 g/mol  = 58.5 g/mol

total moles of NaCl = 65.52 g / 58.5 g/mol = 1.12 mol

moles of undissolved NaCl = 1.12 mol - 0.9 mol

moles of undissolved NaCl = 0.22 mol

Learn more about number of moles here: https://brainly.com/question/14357742

#SPJ1

The molar concentration of SO4^2- anions in the solution is about 3.867 M.

To answer your question, first we need to write the balanced net ionic equation:

Cr^2+(aq) + Cu^2+(aq) → Cr^3+(aq) + Cu(s)

Now, we need to determine the number of moles of Cr(NO3)2 and CuSO4:

Cr(NO3)2: 33.6 g / (130.87 g/mol) = 0.257 moles
CuSO4: 60.5 g / (159.61 g/mol) = 0.379 moles

From the balanced net ionic equation, we can see that 1 mole of Cr^2+ reacts with 1 mole of Cu^2+. Since we have more moles of Cu^2+ than Cr^2+, Cr^2+ is the limiting reagent.

Now, let's calculate the number of electrons transferred:

Since each Cr^2+ ion loses one electron, the number of electrons transferred is equal to the number of moles of Cr^2+ ions:
0.257 moles * 1e- = 0.257e-

Since we need the smallest whole-number coefficients, we'll multiply by the lowest common denominator (LCD) to make the number of electrons a whole number. The LCD for 0.257 is 7, so we'll multiply the entire equation by 7:

7Cr^2+(aq) + 7Cu^2+(aq) → 7Cr^3+(aq) + 7Cu(s)

Therefore, the number of electrons transferred is:
0.257e- * 7 = 1.799e- ≈ 2e-
So the correct answer is 2e-.

(Part 2) To find the molar concentration of SO4^2- anions in the solution, we need to use the moles of CuSO4 and the volume of the solution:

0.379 moles / 0.098 L = 3.867 M

The molar concentration of SO4^2- anions in the solution is approximately 3.867 M.

To learn more about electrons, refer below:

https://brainly.com/question/1255220

#SPJ11

The volume of the gas in the container at sea level and room temperature would be approximately 0.00676 L.

PV = nRT

Where:

P = pressure

V = volume

n = number of moles

R = gas constant

T = temperature

V = nRT / P

First, we need to calculate the number of moles of gas in the container:

n = PV / RT

Where:

P = 1.54 x[tex]10^{4}[/tex] mm Hg

V = 1.00 L

R = 8.31 J/mol*K (gas constant)

T = 88 K

Converting the pressure to kPa and the volume to m^3:

P = 1.54 x [tex]10^{4}[/tex] mm Hg * (101.3 kPa / 760 mm Hg) = 2054.59 Pa

V = 1.00 L * [tex]10^{-3}[/tex] [tex]m^{3}[/tex]/L) = 0.001 [tex]m^{3}[/tex]

n = (2054.59 Pa * 0.001 m^3) / (8.31 J/mol*K * 88 K) ≈ 0.000276 mol

P = 101.3 kPa

T = 23 + 273.15 K = 296.15 K

V = nRT / P

V = (0.000276 mol * 8.31 J/mol*K * 296.15 K) / 101.3 kPa

Converting the volume to liters:

V = 0.00676 L

Learn more about gas equation at

https://brainly.com/question/9908236

#SPJ1

By observing whether a white precipitate forms or not, you can determine whether the unknown solution is strontium nitrate or magnesium nitrate.

When the unknown solution is mixed with potassium carbonate, one of two things can happen, depending on whether the unknown solution is strontium nitrate or magnesium nitrate.

If the unknown solution is strontium nitrate, then when mixed with potassium carbonate, a white precipitate of strontium carbonate will be formed. The balanced chemical equation for this reaction is:

Sr(NO3)2 + K2CO3 -> SrCO3 + 2KNO3

If the unknown solution is magnesium nitrate, then when mixed with potassium carbonate, no visible reaction will occur. Magnesium carbonate is insoluble in water and does not precipitate out. The balanced chemical equation for this reaction is:

Mg(NO3)2 + K2CO3 -> no visible reaction

Learn more about potassium carbonate here: https://brainly.com/question/29595625

#SPJ1

A forensic investigator relies on rigor mortis and livor mortis to determine the time of death, which respectively refers to the body stiffening and going through predictable stages and bluish-purple blotches appearing due to gravity causing the blood to flow downward after death.

A forensic investigator relies on two primary clues from a corpse to determine the time of death: rigor mortis and livor mortis. Rigor mortis refers to the process where the body stiffens after death, going through predictable stages that typically begin around two hours post-mortem. This occurs due to the lack of ATP in muscles, causing them to contract and become rigid. The stiffness progresses and peaks around 12 hours after death, then gradually subsides within the next 24-48 hours.

Livor mortis, on the other hand, is caused by gravity influencing the blood flow in the body after death. As the blood stops circulating, it flows downward and accumulates in the dependent areas, resulting in bluish-purple blotches appearing on the skin due to the lack of oxygen. This process usually starts around 30 minutes to 2 hours after death and becomes more pronounced within 6-12 hours.

By observing the extent and progression of rigor mortis and livor mortis, a forensic investigator can estimate the time of death, aiding in the investigation process.

Know more about rigor mortis here:

https://brainly.com/question/29194734

#SPJ11

0.008 moles of C₃H₇OH contains 1.44528 x 10^22 atoms of carbon.

To find the number of carbon atoms in 0.008 moles of C₃H₇OH, follow these steps:

1. Identify the number of carbon atoms in one molecule of C₃H₇OH. In this case, there are 3 carbon atoms.
2. Calculate the total number of molecules in 0.008 moles of C₃H₇OH by multiplying the number of moles by Avogadro's constant (6.022 x 10^23 molecules/mol).

0.008 moles * (6.022 x 10^23 molecules/mol) = 4.8176 x 10^21 molecules

3. Multiply the total number of molecules by the number of carbon atoms in each molecule to find the total number of carbon atoms:

4.8176 x 10^21 molecules * 3 carbon atoms/molecule = 1.44528 x 10^22 carbon atoms

Learn more about moles at https://brainly.com/question/29367909

#SPJ11

Mg₃N₂ will be completely consumed, and there will be some H₂O left over after the reaction is complete.

To determine the limiting reactant, we need to compare the number of moles of each reactant present to the stoichiometric ratio in the balanced equation.

From the balanced equation, we see that for every 1 mole of Mg₃N₂, 6 moles of H₂O are required. Therefore, the stoichiometric ratio of Mg₃N₂ to H₂O is 1:6.

To find out which reactant is limiting, we can calculate the amount of products that each reactant could produce.

For Mg₃N₂:
0.600 mol Mg₃N₂ x (3 mol Mg(OH)₂ / 1 mol Mg₃N₂) = 1.80 mol Mg(OH)₂

For H₂O:
4.00 mol H₂O x (3 mol Mg(OH)₂ / 6 mol H₂O) = 2.00 mol Mg(OH)₂

Since Mg₃N₂ can only produce 1.80 mol Mg(OH)₂, which is less than the amount that H₂O can produce (2.00 mol), Mg₃N₂ is the limiting reactant.

Therefore, Mg₃N₂ will be completely consumed, and there will be some H₂O left over after the reaction is complete.

To know more about limiting reactant :

https://brainly.com/question/11587316

#SPJ11

The celsius temperature of 1.50 moles of ammonia contained in a 10.0-l vessel under a pressure of 2.0 atm can be determined using the ideal gas law.

The ideal gas law states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin. To calculate the temperature in Celsius, the Kelvin temperature is first determined by rearranging the equation and solving for T.

Then, the Kelvin temperature is converted to Celsius by subtracting 273.15 from the Kelvin temperature. In this case, the calculation would be T = (2.0 * 10.0) / (1.50 * 0.0821) = 1100.16 K. Subtracting 273.15 from 1100.16 K yields 827.01 °C, which is equal to 827.01 - 273.15 = -50.0 °C.

In conclusion, the celsius temperature of 1.50 moles of ammonia contained in a 10.0-l vessel under a pressure of 2.0 atm is -50.0 °C.

Know more about Ideal gas law here

https://brainly.com/question/28257995#

#SPJ11

The AH of the reaction is given as C. -571.6 kJ/mol

The enthalpy change of a reaction (∆H) can be calculated using the formula:

∆H = Σn ∆Hf°(products) - Σn ∆Hf°(reactants),

where n is the stoichiometric coefficient of each substance in the balanced equation.

If we apply this to the reaction of H2(g) and O2(g) forming H2O(l), we get ∆H = -571.6 kJ/mol, where ∆Hf°(H2(g)) = 0 kJ/mol and ∆Hf°(O2(g)) = 0 kJ/mol.

Read more about enthalpies here:

https://brainly.com/question/16985375

#SPJ1

Given the following reaction equation and the enthalpies of formation (∆Hf°) for each substance, what is the ∆H of the reaction?

2 H2(g) + O2(g) → 2 H2O(l)

∆Hf°(H2(g)) = 0 kJ/mol

∆Hf°(O2(g)) = 0 kJ/mol

∆Hf°(H2O(l)) = -285.8 kJ/mol

A. -5335.8 kJ/mol

B. -2815.8 kJ/mol

C. -571.6 kJ/mol

D. 580.7 kJ/mol

Value might be different from absolute zero due to several factors like Measurement errors, External factors, Non-ideal conditions.

"Why might your value be different from absolute zero?" we need to understand the following terms:

1. Value: Refers to a quantity or numerical measurement in a specific context.
2. Absolute zero: The lowest possible temperature, at which all molecular motion stops. It is 0 Kelvin (K) or -273.15 degrees Celsius (°C) or -459.67 degrees Fahrenheit (°F).

Your value might be different from absolute zero due to several factors, such as:
1. Measurement errors: If you are measuring a temperature, there could be inaccuracies in your measuring device, leading to a value different from absolute zero.
2. External factors: The presence of heat or energy in your system can cause the value to deviate from absolute zero.
3. Non-ideal conditions: In real-world situations, reaching absolute zero is practically impossible due to quantum effects and other factors, causing your value to be higher than absolute zero.

By understanding these factors, you can identify why your value may differ from absolute zero.

To know more about Measurement errors:

https://brainly.com/question/475573

#SPJ11

The material has decayed to 37.2% of the original amount after 90 days (with an additional 45 days after decaying 55.1%).

The amount of radioactive material remaining after time t can be calculated using the formula:

[tex]N(t) = N0 * (1/2)^(t/T)[/tex]

where N0 is the initial amount, t is the time elapsed, and T is the half-life of the radioactive material.

In this problem, the initial amount of radioactive material has decayed by 55.1% after 45 days. This means that:

[tex]N(45) = N0 * (1 - 0.551) = 0.449 * N0[/tex]

After an additional 45 days, the total time elapsed is now 90 days. We can use the same formula to calculate the amount of radioactive material remaining after 90 days:

[tex]N(90) = N0 * (1/2)^(90/T)[/tex]

We can then use the two equations to solve for the percentage of the original amount that has decayed after 90 days:

[tex]N(90) = 0.449 * N0 * (1/2)^(90/T)0.449 = (1/2)^(45/T)[/tex]

Taking the natural logarithm of both sides:

[tex]ln(0.449) = ln(1/2)^(45/T)[/tex]

ln(0.449) = -(45/T) * ln(2)

T = -(45/ln(2)) * ln(0.449) = 86.5 days (to the nearest tenth)

Now that we know the half-life of the material, we can use the original formula to calculate the amount of material remaining after 90 days:

[tex]N(90) = N0 * (1/2)^(90/86.5) = 0.372 * N0[/tex]

Therefore, the material has decayed to 37.2% of the original amount after 90 days (with an additional 45 days after decaying 55.1%).

To know more about radioactive material refer to-

https://brainly.com/question/3542572

#SPJ11

All of these elements are in the same period, we can focus on the groups. As we move from left to right, the atomic radius decreases. Therefore, lithium (Li) would have the largest atomic radius among the elements you listed.

To know which of these elements has the largest atomic radius: lithium (Li), beryllium (Be), boron (B), carbon (C), nitrogen (N), oxygen (O), fluorine (F), and neon (Ne).

The largest atomic radius can be determined by examining the elements in the periodic table. Atomic radius generally decreases across a period (from left to right) and increases down a group (top to bottom).

Considering the elements you provided:
- Li (lithium) is in Group 1 and Period 2
- Be (beryllium) is in Group 2 and Period 2
- B (boron) is in Group 13 and Period 2
- C (carbon) is in Group 14 and Period 2
- N (nitrogen) is in Group 15 and Period 2
- O (oxygen) is in Group 16 and Period 2
- F (fluorine) is in Group 17 and Period 2
- Ne (neon) is in Group 18 and Period 2

Since all of these elements are in the same period, we can focus on the groups. As we move from left to right, the atomic radius decreases. Therefore, lithium (Li) would have the largest atomic radius among the elements you listed.

To know more about atomic radius ;

https://brainly.com/question/28722010

#SPJ11

The quantity of pi bonds and rings in a compound affects how many degrees of unsaturation are present. The presence of four pi bonds is suggested by combination of four degrees of unsaturation.

The chemical shift range of 7.0-8.0 ppm in 1H NMR spectra is typically associated with presence of aromatic protons. Therefore, if a compound with four degrees of unsaturation shows signals in its 1H NMR spectrum between 7.0-8.0 ppm, it is likely to contain an aromatic ring or multiple aromatic rings. It is important to note that other functional groups such as carbonyls, alkenes, and alkynes can also contribute to number of degrees of unsaturation, but these groups typically exhibit different chemical shift ranges in 1H NMR spectra.

To know more about pi bonds, here

brainly.com/question/30000552

#SPJ1

--The complete Question is, if a compound has four degrees of unsaturation and shows signals in its 1h nmr spectrum between 7.0 - 8.0 ppm, what structural feature is likely to be present in the compound? --

In the given reaction, nickel (Ni) has been oxidized while bromine (Br2) has been reduced.

In the given reaction, nickel (Ni) has been oxidized while bromine (Br2) has been reduced because nickel has lost electrons while bromine has gained electrons.

The oxidizing agent in the reaction is bromine (Br2) because it has gained electrons, which means it has undergone reduction. Bromine has a higher electronegativity than nickel, which allows it to pull electrons away from nickel and cause it to undergo oxidation.

The reducing agent in the reaction is nickel (Ni) because it has lost electrons, which means it has undergone oxidation. Nickel has a lower electronegativity than bromine, which makes it more likely to lose electrons and undergo oxidation.

Overall, the reaction represents a redox reaction, where one species (nickel) loses electrons and undergoes oxidation while the other species (bromine) gains electrons and undergoes reduction. This is an important process in many chemical reactions, including combustion, rusting, and many biological processes.

Know more about Combustion here:

https://brainly.com/question/15117038

#SPJ11

To find the molar mass of the unknown gas, we can use the ideal gas law, which relates the pressure, volume, temperature, and number of moles of a gas. The ideal gas law is given by:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the universal gas constant, and T is the temperature in kelvins.

We can rearrange this equation to solve for the number of moles:

n = PV / RT

We can then use the number of moles and the mass of the gas to find the molar mass:

M = m / n

where M is the molar mass, m is the mass of the gas, and n is the number of moles.

Plugging in the given values, we have:

P = 1.00 atm

V = 20.0 L

T = 273 K

m = 205 g

R = 0.0821 L·atm/(mol·K)

First, we need to calculate the number of moles of the gas:

n = PV / RT

n = (1.00 atm) x (20.0 L) / (0.0821 L·atm/(mol·K) x 273 K)

n = 0.911 mol

Next, we can use the number of moles and the mass of the gas to calculate the molar mass:

M = m / n

M = 205 g / 0.911 mol

M = 224.8 g/mol

Therefore, the molar mass of the unknown gas is approximately 224.8 g/mol.

To know more about temperature refer here

https://brainly.com/question/7510619#

#SPJ11

The approximate equilibrium partial pressure of NO gas is 0.005 atm.

The balanced chemical equation for the reaction is:

N2(g) + O2(g) ⇌ 2NO(g)

The equilibrium constant expression for this reaction is:

[tex]Kp = (PNO)2 / (PN2)(PO2)[/tex]

At equilibrium, let x be the partial pressure of NO gas. Then the partial pressures of N2 and O2 gas will both be (0.100 - x) atm. Substituting these values into the equilibrium constant expression and solving for x gives:

[tex]0.50 = x^2 / (0.100 - x)^2\\0.50(0.100 - x)^2 = x^2\\0.005 - 0.1x + 0.5x^2 = x^2\\0.5x^2 - 0.1x + 0.005 = 0[/tex]

Using the quadratic formula, we can solve for x:

[tex]x = [0.1 ± sqrt(0.1^2 - 4(0.5)(0.005))] / (2(0.5)) \\x = [0.1 ± 0.195] / 1 \\x = 0.295 or x = 0.005[/tex]

Since the initial partial pressures of N2 and O2 are both 0.100 atm, the equilibrium partial pressure of NO cannot be greater than 0.100 atm. Therefore, the only possible solution is:

x = 0.005 atm

To know more about equilibrium, here

brainly.com/question/30807709

#SPJ4

The ionization process that requires the highest amount of energy is (d) ca(g) --> ca*(g) + e, as calcium has a higher ionization energy than the other elements listed.

To answer this question, we need to consider the ionization energy for each element involved. Ionization energy is the amount of energy required to remove an electron from an atom or ion in the gaseous state. The ionization processes mentioned are:

(a) Na(g) --> Na+(g) + e-
(b) Mg(g) --> Mg+(g) + e-
(c) Al(g) --> Al+(g) + e-
(d) Ca(g) --> Ca+(g) + e-

Comparing the first ionization energies for these elements:
Na: 496 kJ/mol
Mg: 738 kJ/mol
Al: 577 kJ/mol
Ca: 590 kJ/mol

Process (b) Mg(g) --> Mg+(g) + e- requires the highest amount of energy, as magnesium has the highest ionization energy among the given elements.

To know more about ionization energy:

https://brainly.com/question/20658080

#SPJ11

Problems with understanding what happens when things burn can be attributed to various factors, such as lack of knowledge about the combustion process, the role of oxygen, and the production of heat and light energy.

When things burn, a chemical reaction called combustion takes place. During this process, a fuel reacts with oxygen, resulting in the release of energy in the form of heat and light. The products of combustion are usually water, carbon dioxide, and sometimes other gases or particles, depending on the fuel and the burning conditions.

One issue in understanding this process is grasping the importance of oxygen. Oxygen is required for combustion to occur, and the presence of more or less oxygen affects the burning process. For example, in a well-ventilated area, the combustion is more efficient, whereas limited oxygen can result in incomplete combustion and the production of harmful byproducts like carbon monoxide.

Another problem in understanding combustion is the role of heat. Heat is both a product of and a catalyst for combustion. As a fuel gets heated, it may reach its ignition temperature, at which point it spontaneously ignites. Heat also contributes to the spread of fire, as it can cause nearby objects to reach their ignition temperature.

The production of light during combustion is another aspect that can cause confusion. The light emitted during burning is a result of excited atoms and molecules in the flame that release energy in the form of light when they return to their original state. This is what makes flames visible and gives them their characteristic colors.

In summary, problems with understanding what happens when things burn stem from a lack of knowledge about the combustion process, the role of oxygen, and the production of heat and light energy. Gaining a deeper understanding of these factors can help individuals better comprehend the complex nature of combustion and fire safety.

To know more about things burn refer here

brainly.com/question/29886555#

#SPJ11

The correct equilibrium expression for the dissociation of the base pyridine is: C₅H₅N + H₂O ↔ C₅H₅NH+ + OH- is A. Kb = [C₅H₅NH+][OH-] / [C₅H₅N]. The correct option is A.

The equilibrium expression for the reaction of a weak base with water is Kb = [BH+][OH-] / [B], where BH+ is the conjugate acid of the weak base B. In this case, pyridine (C₅H₅N) is the weak base, and its conjugate acid is C₅H₅NH+.

The concentration of water is assumed to be constant and is not included in the equilibrium expression. Therefore, the equilibrium expression for the dissociation of pyridine is Kb = [C₅H5₅H+][OH-] / [C₅H₅N].

Option A is the correct expression since it follows the correct form for the equilibrium expression of a weak base with water. Option B has the concentrations of water and the conjugate acid of the weak base in the denominator, which is incorrect. Option C has the concentration of water in the denominator, which is incorrect.

Option D has the concentration of hydroxide ions (OH-) in the denominator, which is incorrect. Option E has the concentrations of the weak base and its conjugate acid in the denominator, which is also incorrect. Hence option A is the correct option.

To know more about  pyridine, refer here:

https://brainly.com/question/31385286#

#SPJ11

The wavelength of a 66.8 kg person running at a speed of 2.72 m/s through an opening of width 0.80 m is 1.44 m.

Wavelength is a concept used in physics to describe the distance between two points of a wave. It is usually measured in meters or nanometers and is expressed as the inverse of the frequency of the wave. Wavelength is an important concept in fields such as electromagnetism, optics, and acoustics. It is used to describe the size of a wave, the frequency of a wave, and the speed at which a wave travels.

Wavelength (λ) is the distance between two successive crests of a wave. For a person running at a constant speed, the wavelength is determined by the speed of the person and the frequency of the wave.
Frequency (f) is the number of waves passing through a given point in a given time.
So, the wavelength of a 66.8 kg person running at a speed of 2.72 m/s through an opening of width 0.80 m is calculated as follows:
λ = (2.72 m/s) / (2 x 0.80 m) = 1.44 m
Therefore, the wavelength of a 66.8 kg person running at a speed of 2.72 m/s through an opening of width 0.80 m is 1.44 m.

To learn more about wavelength
https://brainly.com/question/29425795
#SPJ4

The sentence that shows humans' main problem is "The level of carbon dioxide in Earth's atmosphere has risen consistently for decades, trapping extra heat near the surface of the Earth," which is the last option.

The sentence that shows humans' main problem is "The level of carbon dioxide in Earth's atmosphere has risen consistently for decades, trapping extra heat near the surface of the Earth." This sentence indicates that the main problem is the increasing levels of carbon dioxide in the Earth's atmosphere caused by human activities. This increase in carbon dioxide is resulting in global warming, where heat is being trapped near the Earth's surface, leading to several negative effects, including rising sea levels, changes in weather patterns, and loss of biodiversity.

Learn more about the earth's climate here.

https://brainly.com/question/3081802

#SPJ1

Answer: 1.20x10^24 atoms O

Explanation:

Oxygen is a diatomic element and is O2

Each molecule of oxygen, O2, has 2 atoms of O.

Each mole has 6.022 x 10^23 molecules of O2.

So our equation is

(6.022x10^23) x 2 = 1.2044x10^24 atoms of O2.

and because our initial problem uses 3 sig figs we round that to

1.20 x 10^24 atoms of O.

Enter your numerical answer with the correct number of significant figures: 5.24 moles.

Moles are small mammals that are known for their distinctive black or brown fur and their burrowing habits. They belong to the family Talpidae and are found in many parts of the world including North America, Europe, and some parts of Asia. Moles have small eyes and ears, short legs, and a long, cylindrical body. They typically measure around 3 to 5 inches in length and weigh around 1 to 4 ounces. They feed mostly on earthworms and other small invertebrates, and their diet is supplemented by insects, eggs, and other small animals. Moles have specialized claws and feet which allow them to dig quickly and efficiently.

To learn more about moles

https://brainly.com/question/15356425

#SPJ4

It is unclear which specific element you are referring to in your question. However, if we are talking about the periodic table of elements, the first person to attend to arrange the elements was Dmitri Mendeleev in the year 1869.

Mendeleev was a Russian chemist who noticed patterns in the properties of elements and arranged them in order of increasing atomic weight. He left gaps in his periodic table for elements that had not yet been discovered, and even predicted the properties of these yet-to-be-discovered elements based on their position in the table.

Mendeleev's work revolutionized the field of chemistry and led to a better understanding of the nature of elements and their relationships to one another. Today, the periodic table is an essential tool for scientists and students alike in understanding the properties and behavior of chemical elements.

To know more about periodic table of elements into battle refer here

brainly.com/question/17105472#

#SPJ11

The heat of combustion of methane is -802.41 kJ/mol, indicating that the combustion of methane is an exothermic reaction that releases heat energy.

To calculate the heat of combustion of methane, we can use formula:

q = (m_water x C_water x ΔT) + (C_cal x ΔT)

Plugging in the values, we get:

q = (1000 g x 4.184 J/g°C x 17.4°C) + (615 J/°C x 17.4°C)

q = 21997.45 J

Next, we need to calculate the number of moles of methane burned:

moles [tex]CH_4[/tex] = mass [tex]CH_4[/tex] / molar mass [tex]CH_4[/tex]

moles [tex]CH_4[/tex] = 65 g / 16.04 g/mol

moles [tex]CH_4[/tex] = 4.05 mol

Finally, we can calculate the heat of combustion per mole of methane:

ΔH = q / moles [tex]CH_4[/tex]

ΔH = -802.41 kJ/mol

To know more about exothermic reaction, here

brainly.com/question/10373907

#SPJ4

--The complete Question is, 1. 65g of methane CH4 is burned in a bomb calorimeter containing 1000 grams of water. The initial temperature of water is 18. 98oC. The specific heat of water is 4. 184 J/g oC. The heat capacity of the calorimeter is 615 J/ oC. After the reaction the final temperature of the water is 36. 38oC.--