Tosylates and Mesylates are formed by reacting an alcohol with a sulfonyl chloride in the presence of a base. They are useful in organic synthesis because they provide improved reactivity and selectivity in various reactions.
To draw a mechanism for the formation of a tosylate or mesylate, follow these steps:
1. Start with the alcohol ([tex]ROH[/tex]) that you want to convert into a tosylate or mesylate.
2. Add the corresponding sulfonyl chloride (TsCl for tosylate or MsCl for mesylate) to the alcohol.
3. A base, such as pyridine ([tex]Py[/tex]), is usually present to facilitate the reaction by accepting the hydrogen ion ([tex]H^+[/tex]) released.
4. The lone pair of electrons on the oxygen atom of the alcohol attacks the sulfur atom in the sulfonyl chloride, displacing the chloride ion ([tex]Cl^-[/tex]) as a leaving group.
5. The result is the formation of the tosylate ([tex]RO-T[/tex]s) or mesylate ([tex]RO-M[/tex]s) and a molecule of [tex]HCl[/tex].
Tosylates and mesylates are formed because they have several advantages:
1. They serve as excellent leaving groups in substitution and elimination reactions, allowing for more efficient reactions and better yields.
2. They are stable under a wide range of reaction conditions, making them suitable for various organic transformations.
3. By transforming the alcohol into a tosylate or mesylate, chemists can improve the reactivity of the starting material and introduce new functional groups into the molecule.
4. They allow for selective reactions, as they can be easily distinguished from other functional groups in the molecule.
In summary, tosylates and mesylates are formed by reacting an alcohol with a sulfonyl chloride in the presence of a base.
They are useful in organic synthesis because they provide improved reactivity and selectivity in various reactions.
To know more about base refer here:
https://brainly.com/question/16866774#
#SPJ11
Bonded Atoms: 2
Lone Pairs: 0
Electron Domains: 2
Ideal Bond Angle?
Hybridization?
Polar or Non Polar?
The ideal bond angle would be 180 degrees.
The hybridization of the central atom would be sp.
The molecule would be linear in shape. If the bonded atoms are the same, the molecule would be nonpolar.
The molecule with Bonded Atoms: 2, Lone Pairs: 0, and Electron Domains: 2 is linear in shape. The ideal bond angle for this molecule is 180 degrees.
The hybridization of this molecule is sp, which means that the two valence electrons of the carbon atom are in the 2s orbital and the two 2p orbitals are hybridized to form two sp orbitals. The two hybrid orbitals are linearly oriented and form the two C-H sigma bonds in the molecule.
The molecule is non-polar because the two C-H bonds are identical in terms of electronegativity and therefore have no dipole moment. Additionally, the linear shape of the molecule ensures that the individual bond dipoles cancel out, resulting in a net dipole moment of zero.
The molecule described here is known as acetylene, which has the chemical formula C2H2. Acetylene is a highly flammable gas and is commonly used in welding and cutting torches due to its high heat output.
Click the below link, to learn more about Bond Angle and hybridisation:
https://brainly.com/question/30230127
#SPJ11
calculate the equilibrium composition, temperature, and pressure of the combustion products after a deflagration.
To calculate the equilibrium composition, temperature, and pressure of the combustion products after deflagration, several factors must be considered, including the reactants' initial composition and the thermodynamic properties of the products.
This can be done using chemical equilibrium software such as the NASA Glenn Chemical Equilibrium with Applications (CEA) program.
The CEA program calculates the equilibrium composition, temperature, and pressure of the combustion products by solving for the thermodynamic equilibrium conditions of the reactants and products. The program uses the Gibbs free energy minimization method to determine the equilibrium state.
The equilibrium composition of the combustion products will depend on the reactants' initial composition, which can include fuels, oxidizers, and any other reactants present. The temperature and pressure of the combustion products will also be influenced by the reactants' initial conditions and the combustion process itself.
Overall, the calculation of the equilibrium composition, temperature, and pressure of combustion products after deflagration is a complex process that requires a thorough understanding of the thermodynamic properties of the reactants and products.
To know more about thermodynamic properties refer here:
https://brainly.com/question/12977995#
#SPJ11
to a first approximation, the ionization constant of H2S is,
a) near zero
b) much less than 1
c) about 1
d) much more than 1
The ionization constant of H[tex]_{2}[/tex]S is much less than 1, which suggests that H[tex]_{2}[/tex]S is a weak acid. Option b is answer.
When an acid dissolves in water, it donates a hydrogen ion (H+) to the water molecules, which makes the solution more acidic. The strength of an acid is determined by its tendency to donate H+ ions. A strong acid, such as hydrochloric acid (HCl), completely dissociates in water and donates all of its H+ ions, while a weak acid, such as H[tex]_{2}[/tex]S, only partially dissociates and donates only some of its H+ ions. The ionization constant (Ka) is a measure of the strength of an acid and represents the ratio of dissociated H+ ions to undissociated acid molecules in a solution.
In conclusion, the ionization constant of H[tex]_{2}[/tex]S is much less than 1, which indicates that it is a weak acid. This means that H[tex]_{2}[/tex]S only partially dissociates in water and donates only some of its H+ ions. Understanding the strength of acids is important in many fields, including chemistry, biology, and medicine.
Option b is answer.
You can learn more about ionization constant at
https://brainly.com/question/31491716
#SPJ11
13) How many moles of chlorine gas are needed to make 0.6 moles of sodium chloride?
Given the reaction: 2Na + Cl2 → 2NaCl
A) 0.6
B) 0.3
C) 1.2
D) 3.6
E) not enough information
To determine the amount of chlorine gas needed to make a certain amount of sodium chloride, we need to use stoichiometry and the balanced equation for the reaction.
According to the equation, 2 moles of sodium react with 1 mole of chlorine gas to produce 2 moles of sodium chloride. Therefore, for every mole of sodium chloride produced, we need half a mole of chlorine gas.
Since we want to make 0.6 moles of sodium chloride, we need half that amount, or 0.3 moles of chlorine gas. Thus, the correct answer is B) 0.3.
Learn more about chlorine gas
https://brainly.com/question/13123721
#SPJ4
56) During the fermentation of one molecule of glucose, the net production of ATP is_____a. 4b. 36c. 2d. 38
The net production of ATP during the fermentation of one molecule of glucose is 2 ATP molecules. option (c)
Fermentation is a metabolic pathway that allows the cell to produce ATP in the absence of oxygen. In this process, glucose is converted into pyruvate through glycolysis, which results in the net production of 2 ATP molecules. The pyruvate is then converted into lactate or ethanol, regenerating the NAD+ required for glycolysis to continue.
Since fermentation does not involve the electron transport chain, the yield of ATP is relatively low. In contrast, oxidative phosphorylation, which occurs in the presence of oxygen, can produce up to 36 or 38 ATP molecules per glucose molecule, depending on the type of organism.
Learn more about 2 ATP molecules
https://brainly.com/question/12277357
#SPJ4
Which is the load?
Lever Diagram
B
E
C
D
A
Answer:
A is the load.
Explanation:
A is the load.
B is the resistance arm.
C is the fulcrum.
D is the effort arm.
E is the effort.
I hope this helps!
O--H-H is a base, neither an acid nor a base, an acid
O--H-H represents a molecule of water (H2O) and it is neither an acid nor a base. Water is a neutral compound and does not have any excess H+ or OH- ions to classify it as an acid or a base.
Acids and Bases.A base is a substance that can accept protons (H+ ions) or donate electrons. Bases are characterized by a pH value greater than 7 and can react with acids to form salts and water. Some common examples of bases include hydroxide ions (OH-), ammonia (NH3), and sodium hydroxide (NaOH).
An acid is a substance that can donate protons (H+ ions) or accept electrons. Acids are characterized by a pH value less than 7 and can react with bases to form salts and water. Some common examples of acids include hydrochloric acid (HCl), sulfuric acid (H2SO4), and acetic acid (CH3COOH).
Learn more on Acids and Bases here https://brainly.com/question/9836972
#SPJ1
how many grams of solute are required to make a 42% solution from 700 ml of solvent? (round to the nearest whole gram with no units!)
23g is the mass of solute that is required to make a 42% solution from 700 ml of solvent.
A body's mass is an inherent quality. Prior to the discoveries of the atom and the theory of particles, it was widely considered to be tied to the amount of substance in a physical body.
It was discovered that, despite having the same quantity of matter in theory, different atoms and elementary particles have varied masses. There are various conceptions of mass in contemporary physics that are theoretically different but physically equivalent.
mass of solute = 42/100×700
= 23g
To learn more about mass, here:
https://brainly.com/question/19694949
#SPJ4
T or F Antoine Lavoisier formulated the atomic theory
Antoine Lavoisier formulated the atomic theory. This statement is False.
While Antoine Lavoisier made significant contributions to the development of modern chemistry, he did not formulate the atomic theory.
The atomic theory was first proposed by the English chemist John Dalton in the early 19th century.
Dalton's atomic theory proposed that all matter is made up of tiny, indivisible particles called atoms, which have unique properties based on their element.
Dalton also suggested that chemical reactions involve the rearrangement of atoms, but do not create or destroy them.
Lavoisier, on the other hand, is best known for his work on the law of conservation of mass and the development of the modern system of naming chemical compounds.
He was a key figure in the transition from alchemy to modern chemistry and made many significant contributions to the field, but he did not formulate the atomic theory.
to know more about atomic theory refer here:
https://brainly.com/question/25176189#
#SPJ11
the concentration of mg2 in seawater is 0.052 m. at what ph will the mg2 begin to precipitate as mg(oh)2?
[tex]Mg(OH)_{2}[/tex] will begin to precipitate in seawater at a pH of 9.96 or lower.
The solubility product constant ([tex]K_{sp}[/tex]) for [tex]Mg(OH)_{2}[/tex] is 1.8 x 10^-11. When the concentration of [tex]Mg^{2+}[/tex] in seawater exceeds the([tex]K_{sp}[/tex]) value for [tex]Mg(OH)_{2}[/tex], precipitation of [tex]Mg(OH)_{2}[/tex] will occur. Using the ([tex]K_{sp}[/tex]) expression, we can write:
([tex]K_{sp}[/tex]) = [tex]Mg(OH)_{2}[/tex]
At the point of precipitation, [[tex]Mg^{2+}[/tex]] and [OH-] will be equal. Therefore, we can substitute 0.052 M for [[tex]Mg^{2+}[/tex]] and x M for [[tex]OH^{-}[/tex]] (since we don't know the pH yet) and solve for x:
1.8 x 10^-11 = (0.052)(x)^2
x = 1.1 x 10^-6 M
The pH at which [tex]Mg(OH)_{2}[/tex] will begin to precipitate can be determined from the following equation:
pH = p[tex]K_{w}[/tex] - pOH
where p[tex]K_{w}[/tex] is the ion product constant for water, which is 14.00 at 25°C. Therefore:
pH = 14.00 - (-log(1.1 x 10^-6))
pH = 9.96
So, [tex]Mg(OH)_{2}[/tex] will begin to precipitate in seawater at a pH of 9.96 or lower.
Learn more about solubility here: https://brainly.com/question/28170449
#SPJ11
what statement best describes the rates of electrophilic aromatic substitution for reactions a and b?
The rate of electrophilic aromatic substitution for reaction a will be higher than the rate for reaction b because the electron-donating group (EDG) in reaction a will increase the electron density of the aromatic ring, making it more nucleophilic and thus more reactive towards electrophiles.
On the other hand, the electron-withdrawing group (EWG) in reaction b will decrease the electron density of the aromatic ring, making it less nucleophilic and less reactive towards electrophiles. Therefore, the EDG in reaction a will facilitate the electrophilic attack and increase the reaction rate, while the EWG in reaction b will hinder the electrophilic attack and decrease the reaction rate.
In electrophilic aromatic substitution, an electrophile (an electron-seeking species) reacts with an aromatic ring (a compound with alternating single and double bonds in a cyclic structure) by replacing a hydrogen atom on the ring.
The rates of electrophilic aromatic substitution for reactions A and B depend on various factors:
1. Nature of the electrophile: Stronger electrophiles lead to faster reaction rates.
2. Structure of the aromatic ring: Electron-donating groups (EDGs) activate the ring and increase the rate, while electron-withdrawing groups (EWGs) deactivate the ring and decrease the rate.
3. Reaction conditions: Temperature, solvent, and catalysts can affect the reaction rates.
So, to determine which statement best describes the rates of electrophilic aromatic substitution for reactions A and B, you would need to consider the electrophiles involved, the structure of the aromatic rings, and the reaction conditions.
Learn more about electron-withdrawing group (EWG) here:
https://brainly.com/question/31518784
#SPJ11
Use of SG to Calculate Volume Using the SI System Must know SG and weight KNOW THIS Equation (same as previous sections, just rearranged) milliliters = (grams/SG) Example Volume in mL of 642 g of nitric acid (SG=1.40) (642 g/1.40) = 458.6 mL
The volume of nitric acid in mL is 458.6 mL.
The specific gravity of a substance can provide information about its purity, concentration, or composition. The use of specific gravity (SG) to calculate volume using the SI system involves knowing the SG and weight of the substance.
The equation used is the same as in previous sections but rearranged to solve for volume in milliliters (mL) instead of weight in grams.
To calculate volume in mL, divide the weight in grams by the SG.
For example, if you have 642 g of nitric acid with an SG of 1.40:
The volume in mL would be (642 g/1.40) = 458.6 mL.
To know more about specific gravity click here:
https://brainly.com/question/9638888
#SPJ11
what if too much solvent is placed in the developing chamber
The level of the solvent system is too high. If the level of the solvent system in the chamber is above the spot when the plate is inserted, the compound from the spot will dissolve in the solvent instead of migrating up the plate. You may see irreproducible results if you reuse the solvent system for several TLCs.
In the fischer projection of D-glucose, what is the penultimate carbon and why?
Answer:
In a Fischer projection of a monosaccharide, the penultimate carbon is the next-to-last carbon or alternatively, the last stereogenic carbon. For D-sugars, this carbon is depicted with hydrogen on the left and hydroxyl on the right.
Explanation:
A Fischer projection is a two-dimensional representation of a three-dimensional molecule. It is commonly used to depict monosaccharides and amino acids. In a Fischer projection of a monosaccharide, the penultimate carbon is the next-to-last carbon or alternatively, the last stereogenic carbon. For D-sugars, this carbon is depicted with hydrogen on the left and hydroxyl on the right. This notation is used to differentiate between L- and D- carbohydrates. L- and D- carbohydrates are enantiomers, which means they are non-superimposable mirror images of each other.
Calculate the volume (in mL) of 0.170 M NaOH that must be added to 311 mL of 0.0485 M HA (a generic weak acid) to give the solution a pH of 7.55. The pKa of HA = 7.18.
We need to add 208.9 mL of 0.170 M NaOH to the solution to achieve a pH of 7.55.
To solve this problem, we can use the Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA])
where [A-] is the concentration of the conjugate base and [HA] is the concentration of the weak acid.
At pH 7.55, we can calculate the ratio [A-]/[HA] using the pKa of HA:
7.55 = 7.18 + log([A-]/[HA])
0.37 = log([A-]/[HA])
[A-]/[HA] = 2.35
Now we can set up an equation to solve for the amount of NaOH needed to reach this ratio:
0.0485 mol/L x 0.311 L = [HA]
[A-] = 2.35 x [HA] = 2.35 x 0.0150835 mol = 0.035457 mol
0.035457 mol = 0.170 mol/L x V
V = 0.2089 L or 208.9 mL
Therefore, we need to add 208.9 mL of 0.170 M NaOH to the solution to achieve a pH of 7.55.
To know more about Henderson-Hasselbalch, refer here:
https://brainly.com/question/13423434#
#SPJ11
What is the % of each element of Ba3(AsO4)2?
The percentages of Ba, As, and O in [tex]Ba_{3}(AsO_{4})_{2}[/tex] are approximately 59.7%, 21.7%, and 18.6%, respectively.
What are the percentages?
To determine the percentage of each element in [tex]Ba_{3}(AsO_{4})_{2}[/tex] , we need to calculate the molar mass of the compound and then divide the molar mass of each element by the total molar mass of the compound and multiply by 100%.
The molar mass of [tex]Ba_{3}(AsO_{4})_{2}[/tex] can be calculated by adding the atomic masses of each element present in the compound:
Ba: 3 x 137.33 g/mol = 412.0 g/mol
As: 2 x 74.92 g/mol = 149.8 g/mol
O: 8 x 16.00 g/mol = 128.0 g/mol
Total molar mass = 689.8 g/mol
Now we can calculate the percentage of each element in the compound:
Ba: (412.0 g/mol / 689.8 g/mol) x 100% = 59.7%
As: (149.8 g/mol / 689.8 g/mol) x 100% = 21.7%
O: (128.0 g/mol / 689.8 g/mol) x 100% = 18.6%
Therefore, the percentages of Ba, As, and O in [tex]Ba_{3}(AsO_{4})_{2}[/tex] are approximately 59.7%, 21.7%, and 18.6%, respectively.
To know more about molar mass, visit:
https://brainly.com/question/30216315
#SPJ1
Complete question is: The percentages of Ba, As, and O in [tex]Ba_{3}(AsO_{4})_{2}[/tex] are approximately 59.7%, 21.7%, and 18.6%, respectively.
17) Identify the FALSE statement about acid rain.A) Acid rain contains nitric acid and sulfuric acid.B) Acid rain dissolves marble statues.C) Acid rain comes from coal-powered electric power plants.D) Acid rain corrodes steel bridges.E) Acid rain comes from hydroelectric power plants.
The FALSE statement about acid rain is E) Acid rain comes from hydroelectric power plants.
Acid rain is primarily caused by emissions from coal-powered electric power plants and other industrial processes that release sulfur dioxide and nitrogen oxides into the atmosphere.
When sulfur dioxide (SO2) and nitrogen oxides (NOx) are released into the atmosphere, they can react with water, oxygen, and other chemicals to form sulfuric acid (H2SO4) and nitric acid (HNO3). These acids can then fall to the ground as acid rain, snow, or fog.
Coal-fired power plants are a major source of sulfur dioxide and nitrogen oxides, as well as other pollutants such as mercury and particulate matter. Other industrial processes that can contribute to acid rain include smelting, oil refining, and transportation.
Hydroelectric power plants, on the other hand, do not directly emit sulfur dioxide or nitrogen oxides. However, they can still contribute to acid rain indirectly if they involve the construction of large dams, which can disrupt ecosystems and lead to increased erosion and sedimentation in rivers and lakes.
To learn more about ecosystems, refer below:
https://brainly.com/question/13979184
#SPJ11
cyclic alkene + O₃ + Zn/Ch₃O₂H or S(CH₃)₂→
The reaction you're describing is an oxidative cleavage reaction where a cyclic alkene reacts with ozone (O3) . and the product formed is cyclic ozonide. so correct option is A)cyclic ozonide.
reducing agent such as zinc (Zn) and acetic acid (CH3CO2H) or dimethyl sulfide (S(CH3)2) to form a pair of carbonyl compounds. The general reaction can be represented as follows:
Cyclic alkene + O3 + reducing agent → Carbonyl compounds
For example, let's consider the reaction between cyclohexene (a cyclic alkene) and ozone in the presence of zinc and acetic acid:
C6H10 + O3 + Zn/CH3CO2H → C5H8O2 + C2H4O
In this reaction, the double bond of cyclohexene is broken and two carbonyl groups are formed. One of the products is the ketone cyclopentanone, while the other is the aldehyde acetaldehyde.
The reaction mechanism involves the formation of an ozonide intermediate, which is then reduced by the reducing agent to form the carbonyl compounds.
Note that the oxidative cleavage of cyclic alkenes can also lead to the formation of different products, depending on the nature of the alkene and the reducing agent used.
learn more about ozone here:
https://brainly.com/question/14330630?utm_source=android&utm_medium=share&utm_campaign=question
#SPJ11
the complete questions is :
cyclic alkene + O₃ + Zn/Ch₃O₂H or S(CH₃)₂→
What is the product formed when a cyclic alkene reacts with ozone and Zn/Ch3CO2H?
A) cyclic ozonide
B) cyclic alkene
C) cyclic hexane
D) pentane
Seventeen apples eight 3.25 pounds they cost 59 cents for 1 pound what is the cost of 8.95x10^3 apples?
The cost of [tex]8.95x10^3[/tex] apples = $1,624.18.
What do you understand by the cost of an article?The cost of an article refers to the price that is associated with producing, acquiring, or manufacturing the item.
Let's start by figuring out how much a pound of apples costs:
59 cents/1 pound = $0.59/1 pound
Next, let's determine how much 17 apples weigh in total.
17 apples x 3.25 pounds/apple = 55.25 pounds
Let's now determine how much one apple costs:
$0.59/1 pound x 1/3.25 pounds/apple = $0.1815/apple
Let's finally determine how much [tex]8.95x10^3[/tex] apples would cost:
[tex]8.95x10^3[/tex] apples x $0.1815/apple = $1,624.18
As a result, cost of [tex]8.95x10^3[/tex] apples = $1,624.18
Learn more about cost here:
https://brainly.com/question/14725550
#SPJ1
A buffer is prepared containing 1.00 M acetic acid and 1.00 M sodium acetate. What is its pH?
The pH of the buffer solution is 4.76.
To calculate the pH of the buffer solution, we need to use the Henderson-Hasselbalch equation, which is given by:
pH = pKa + log([A-]/[HA])
where pKa is the dissociation constant of the weak acid, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid.
For acetic acid (CH3COOH), the pKa is 4.76.
Since the buffer solution contains equal concentrations of acetic acid and sodium acetate, we can assume that [A-] = [CH3COO-] = 1.00 M and M[HA] = [CH3COOH] = 1.00 M.
Therefore, plugging in these values into the Henderson-Hasselbalch equation, we get:
pH = 4.76 + log([1.00]/[1.00]) = 4.76
Therefore, the pH of the buffer solution is 4.76.
To know more pH please visit:-
https://brainly.com/question/172153
#SPJ4
What do the processes of radioactive decay and transmutation have in common in terms of of end products formed?
The phenomenon exhibited by an atom's nuclei due to the nuclear instability is known as the radioactivity. The process in which the unstable nuclei of radioactive atoms become stable by emitting charged particles and energy is known as the radioactive decay.
One kind of nuclear reaction in which a nucleus transforms into another such that the consequent changes in mass number and atomic number are restricted to just a few units is called a transmutation reaction.
In both radioactive decay and transmutation reactions the newly formed elements have different atomic or mass numbers as compared to that of the parent nuclides.
To know more about transmutation, visit;
https://brainly.com/question/919112
#SPJ4
A material has a coefficient of volume expansion of 60 ´ 10-6/°C. What is its area coefficient of expansion?
The material has an area coefficient of expansion of 1.2 × [tex]10^{-4}[/tex]/°C.
How to determine the area coefficient of expansion?The coefficient of thermal expansion is a material property that describes the change in length, area or volume of a material in response to a change in temperature. The area coefficient of thermal expansion is the fractional change in area of a material per unit change in temperature.
To find the area coefficient of expansion, we need to use the relationship between the coefficients of volume and area expansion, which is:
β = 2α
where β is the area coefficient of expansion and α is the coefficient of volume expansion. Substituting the given value of α = 60 × [tex]10^{-6}[/tex]/°C, we get:
β = 2 × 60 × [tex]10^{-6}[/tex]/°C
β = 120 × [tex]10^{-6}[/tex] /°C
β = 1.2 × [tex]10^{-4}[/tex]/°C
To know more about Area Coefficient of Expansion:
https://brainly.com/question/30761097
#SPJ11
12) Which one of the following compounds contains ionic bonds?A) RaOB) HBrC) PCl3D) CO2E) CCl4
The compound that contains ionic bonds is A) RaO.
RaO is composed of the metal radium (Ra) and the non-metal oxygen (O)
It is an ionic compound. Ra is a Group 2 metal, and it readily loses its two valence electrons to form a Ra2+ cation. Oxygen is a Group 16 non-metal that tends to gain two electrons to form an O2- anion.
The electrostatic attraction between the oppositely charged Ra2+ and O2- ions results in the formation of an ionic bond.
In contrast, HBr, PCl3, CO2, and CCl4 all contain covalent bonds, where electrons are shared between atoms rather than transferred to form ions.
learn more about ionic compound here:
https://brainly.com/question/26059401?utm_source=android&utm_medium=share&utm_campaign=question
#SPJ11
when 4-ethoxyaniline reacts with acetic anhydride, what new functional group or type of compound is formed?
When 4-ethoxyaniline reacts with acetic anhydride, the new functional group formed is an amide. The type of compound formed is called N-acetyl-4-ethoxyaniline.
4-Ethoxyaniline, which contains an amino group (-NH2), reacts with acetic anhydride. The acetic anhydride undergoes nucleophilic acyl substitution with the amino group.
The oxygen in the amino group attacks the carbonyl carbon of the acetic anhydride, breaking the carbonyl double bond and forming a tetrahedral intermediate. The intermediate collapses, reforming the carbonyl double bond and expelling the acetate ion.
The result is the formation of an amide functional group, specifically N-acetyl-4-ethoxyaniline.
To know more about amide click here:
https://brainly.com/question/28274721
#SPJ11
17. You have a % recovery of benzoic acid of 44%. Provide reasonable explanation(s) for this result.
A 44% recovery of benzoic acid could be due to incomplete extraction, loss during evaporation or filtration, impure starting material, or measurement errors.
The possible explanations for this result could include:
1. Incomplete extraction: During the extraction process, not all benzoic acid might have been successfully transferred from the original solution to the new one, resulting in a lower recovery rate.
2. Loss during evaporation or filtration: Some benzoic acid could have been lost while evaporating the solvent or during the filtration process, leading to a lower percentage of the recovery.
3. Impure starting material: The initial sample of benzoic acid might have contained impurities, which could have affected the recovery process and resulted in a lower percentage.
4. Measurement errors: There could be errors in the initial and final mass measurements, leading to an inaccurate calculation of the percent recovery of benzoic acid.
In conclusion, a 44% recovery of benzoic acid could be due to incomplete extraction, loss during evaporation or filtration, impure starting material, or measurement errors.
To learn more about the maximum theoretical percent recovery from the recrystallization of benzoic acid, visit: https://brainly.com/question/24085862
#SPJ11
a buffer is prepared by adding 115ml of 0.32m nh3 to 150ml of 0.18m nh4no3 what is the ph of the final solution
The pH of the final solution can be determined by calculating the amount of hydrogen ions present in the solution after combining the two different solutions.
The NH3 solution contains 0.32 moles of NH3, which will produce 0.32 moles of H+ ions in the solution. The NH4NO3 solution contains 0.18 moles of NH4NO3, which will produce 0.18 moles of H+ ions in the solution. When the two solutions are combined, the total moles of H+ ions in the buffer solution will be 0.5 moles.
Since the volume of the buffer solution is 265 mL, the concentration of H+ ions in the solution will be 0.5/0.265 = 1.89 M. The pH of a solution with a concentration of 1.89 M H+ ions will be -log[1.89] = 0.74. Thus, the pH of the final buffer solution is 0.74.
Know more about moles here
https://brainly.com/question/20486415#
#SPJ11
Predict the order of solubility in water of the salts of Pb(II).Pb(II). Arrange the compounds according to their relative solubilities.
The order of solubility in water for the salts of Pb(II) is Pb(NO3)2 > PbSO4 > PbCl2. This is because Pb(NO3)2 is a highly soluble salt due to the high solubility of nitrate ions in water.
PbSO4 is less soluble than Pb(NO3)2 as sulfate ions are not as soluble in water as nitrate ions. PbCl2 is the least soluble of the three salts due to the low solubility of chloride ions in water.
The solubility of these salts also depends on factors such as temperature, pressure, and pH of the solution. However, under standard conditions, the order of solubility remains as stated above.
In conclusion, the order of solubility in water for Pb(II) salts is Pb(NO3)2 > PbSO4 > PbCl2, with Pb(NO3)2 being the most soluble and PbCl2 being the least soluble.
To know more about nitrate ions refer here:
https://brainly.com/question/28504818#
#SPJ11
the convention is to write the sugar whose anomeric carbon is involved in the linkage on the
The convention when writing or describing these linkages is to mention the sugar containing the anomeric carbon first, followed by the other sugar involved in the bond.
In glycosidic linkages, the anomeric carbon of a sugar is involved in forming a bond with another sugar molecule. When writing or describing these connections, the sugar holding the anomeric carbon is mentioned first, followed by the other sugar involved in the bond.
For example, consider a linkage between glucose and fructose. If the anomeric carbon of glucose is involved in the linkage, we would write it as "glucose-fructose." This helps clarify which sugar's anomeric carbon is participating in the bond, which is important for understanding the structure and properties of the resulting disaccharide or polysaccharide.
Remembering this convention will make it easier to interpret and communicate information about glycosidic linkages in carbohydrates, which is essential in fields like biochemistry and molecular biology.
For more such questions on anomeric carbon, click on:
https://brainly.com/question/13265196
#SPJ11
what does it mean if a disaccharide has one c1 carbon not involved in a glycocdic bond (like alpha 1-4 bond of maltose)
If a disaccharide has one C1 carbon not involved in a glycosidic bond, it means that one of the monosaccharide units that make up the disaccharide has an unlinked C1 carbon.
In the case of maltose, which is made up of two glucose units joined by an α-1,4-glycosidic bond, one of the glucose units has an unlinked C1 carbon.
This unlinked C1 carbon in one of the monosaccharide units can be involved in other chemical reactions, such as glycosylation, phosphorylation, or oxidation.
For example, in glycogen, the glucose units are linked by α-1,4-glycosidic bonds and α-1,6-glycosidic bonds. The α-1,6-glycosidic bond creates a branching point, where a glucose unit is attached to a C6 carbon of another glucose unit.
The unlinked C1 carbon of the branching glucose unit can then be used to attach additional glucose units, leading to the formation of highly branched glycogen molecules.
learn more about disaccharide here:
https://brainly.com/question/12921453
#SPJ4
One characteristic of a mixture is that its components can be separated by:
Select one:
a. a chemical process
b. a physical process
One characteristic of a mixture is that its components can be separated by a physical process. So, the correct answer is option b. A physical process.
The physical process is one characteristic of a mixture. This means that the components of a mixture can be separated by physical methods such as filtration, distillation, chromatography, or evaporation, without undergoing any chemical change. In contrast, a chemical process involves the breaking and forming of chemical bonds and results in the formation of new substances with different properties.
Learn more about the physical process and chemical process at https://brainly.com/question/1411477
#SPJ11
