dover company began operations in 2020 and determined its ending inventory at cost and at lcnrv at december 31, 2020, and december 31, 2021. this information is presented below. 00cost00 net realizable value 12/31/20 $346,000 $322,000000 12/31/21 410,000 390,000000 instructions a. prepare the journal entries required at december 31, 2020, and december 31, 2021, assuming inventory is recorded at lcnrv and a perpetual inventory system using the cost-of-goods-sold method. b. prepare journal entries required at december 31, 2020, and december 31, 2021, assuming inventory is recorded at lcnrv and a perpetual system using the loss method. c. which of the two methods above provides the higher net income in each year?

Answers

Answer 1

a) Journal entry for December 31, 2020 is inventory loss is $24,000, Cr. Inventory $24,000. No journal entry is required for December 31, 2021.

b)  Journal entry for December 31, 2020 is inventory loss is $24,000, Cr. Inventory $24,000.  Journal entry for December 31, 2021 is inventory loss is $20,000, Cr. Inventory $20,000.

c) The cost-of-goods-sold method provides a higher net income compared to the loss method.

a. At December 31, 2020:

Inventory Loss: $24,000 ($346,000 - $322,000)

Inventory write-down:

Dr. Cost of Goods Sold $24,000

Cr. Inventory $24,000

At December 31, 2021:

No journal entry is required as the net realizable value is higher than the cost of inventory.

b. At December 31, 2020:

Inventory Loss is  $24,000 ($346,000 - $322,000)

Inventory write-down is written as,

Dr. Loss Due to Market Decline $24,000

Cr. Inventory $24,000

At December 31, 2021:

Inventory Recovery is  $20,000 ($390,000 - $370,000)

Inventory write-up is recorded as,

Dr. Inventory $20,000

Cr. Loss Due to Market Decline $20,000

c. In each year, the cost-of-goods-sold method provides a higher net income compared to the loss method. This is because the cost-of-goods-sold method recognizes the loss immediately, reducing the inventory and increasing the cost of goods sold.

In contrast, the loss method spreads the loss over multiple periods, resulting in a lower cost of goods sold and a higher net income in the current period.

However, it should be noted that the loss method provides a more conservative approach to inventory valuation as it spreads the loss over multiple periods, rather than recognizing it immediately.

To learn more about inventory click on,

https://brainly.com/question/23266179

#SPJ4


Related Questions

A car manufacturer requires tires. Inventory consumption is constant at 600 tires per day. Lead time is normally distributed with a mean of four days and a standard deviation of one day. If the manufacturer wishes to avoid a stockout with probability P(z < +2.00), what should the reorder point be?

Answers

The car manufacturer requires tires and the inventory consumption is constant at 600 tires per day. The lead time is normally distributed with a mean of four days and a standard deviation of one day. The manufacturer wishes to avoid a stockout with probability P(z < +2.00).

We can calculate the reorder point using the following formula:

Reorder point = Mean demand during lead time + Z-score x Standard deviation of lead time demand

Given that the inventory consumption is constant at 600 tires per day, we can calculate the mean demand during lead time as follows:

Mean demand during lead time = Mean lead time x Daily demand

= 4 days x 600 tires per day= 2400 tires

We are given that the manufacturer wishes to avoid a stockout with probability P(z < +2.00). Using the standard normal distribution table, we can find that the probability P(z < +2.00) is 0.9772. Therefore, the z-score corresponding to this probability is +2.00.

Using the formula for the reorder point, we can now calculate the reorder point as follows:Reorder point = Mean demand during lead time + Z-score x Standard deviation of lead time demand

= 2400 tires + 2.00 x (1 day x 600 tires per day)^0.5

= 2400 tires + 2.00 x 173.2 tires

= 2400 tires + 346.4 tires

= 2746.4 tires

Therefore, the reorder point should be 2746.4 tires.

Learn more about probability: https://brainly.com/question/24756209

#SPJ11

In the perfectly competitive market, all firms in the market are assumed to be producing: a. complementary products. b. identical products. c. differentiated products. d. products that are heavily advertised.

Answers

In the perfectly competitive market, all firms are assumed to be producing (b) identical products.

This means that consumers view the products of all firms as perfect substitutes for each other.

In this type of market, firms have no control over the price of their product and must accept the market price, which is determined by the forces of supply and demand. This assumption of identical products is one of the key characteristics of perfect competition.

Consumers perceive them as perfect substitutes. This assumption allows for perfect competition, where buyers have no preference for one firm's product over another's and can easily switch between suppliers without any impact on their satisfaction.

This assumption also implies that firms have no control over the market price and must accept the prevailing market price determined by supply and demand forces.

To know more about competitive market , refer here :

https://brainly.com/question/29617378#

#SPJ11

The three stages of receiving feedback in the correct order are:.

Answers

The three stages of receiving feedback in the correct order are: receiving, processing, and acting.

The first stage of receiving feedback involves actively listening to the feedback and trying to understand the message being conveyed. This requires being open-minded and non-defensive, and seeking to fully comprehend what the person giving the feedback is trying to communicate.

Once the feedback has been received, the second stage involves processing the feedback. This involves reflecting on the feedback and considering its validity and relevance to the situation at hand. It may also involve seeking clarification or additional information to fully understand the feedback.

The final stage is acting on the feedback. This involves taking action to address the feedback and make any necessary changes to improve performance or behavior. This may involve setting goals or action plans to address specific areas of improvement, and regularly monitoring progress to ensure that changes are being made.

To know more  feedback click here

brainly.com/question/30449064

#SPJ11

a company factored $46,000 of its accounts receivable and was charged a 2% factoring fee. the journal entry to record this transaction would include a: multiple choice debit to cash of $46,000 and a credit to notes payable of $46,000. debit to cash of $46,000, a credit to factoring fee expense of $920, and a credit to accounts receivable of $45,080. debit to cash of $46,000 and a credit to accounts receivable of $46,000. debit to cash of $46,920 and a credit to accounts receivable of $46,920. debit to cash of $45,080, a debit to factoring fee expense of $920, and a credit to accounts receivable of $46,000.

Answers

The journal entry to record this transaction would include a debit to cash of $46,000, a credit to factoring fee expense of $920, and a credit to accounts receivable of $45,080. The correct answer is option B) .

Factoring is a process in which a company sells its accounts receivable to a third party, known as a factor, at a discount. The factor then assumes the responsibility of collecting the receivables from the company's customers. In this scenario, the company factored $46,000 of its accounts receivable and was charged a 2% factoring fee.

To record this transaction, the company would debit its cash account for the amount received from the factor, which is $46,000. The company would also credit its accounts receivable account for the amount of receivables sold, which is $45,080 ($46,000 - 2% * $46,000).

Finally, the company would credit its factoring fee expense account for the fee charged by the factor, which is $920 (2% * $46,000).

Therefore, the correct journal entry to record this transaction would be:

Debit: Cash $46,000

Credit: Factoring fee expense $920

Credit: Accounts receivable $45,080.

The correct answer is option B) .

To learn more about accounts click on,

https://brainly.com/question/14202517

#SPJ4

Which quality term refers to the degree to which the product or service design specifications are met?

Answers

Conformance quality refers to the degree to which the product or service design specifications are met.

A product, service, or process's ability to adhere to design standards is known as quality of conformance. Design requirements are an interpretation of client requirements. However, if the person who generated the design specifications did not accurately grasp what the client desired, a product with high quality of conformity may still not be recognized by a consumer as being an acceptable product.

An sufficient tolerance range is used to measure the quality of conformance. For instance, if a flight's planned departure time is 10 minutes away, any departure that occurs within that window has a high grade of conformity, but those that occur at intervals of greater than 10 minutes do not. conformity to requirements within a reasonable tolerance range is considered to be of high quality of conformity.

Learn more about Conformance here:

https://brainly.com/question/14615134

#SPJ4

How can a writer best convey the "you" attitude?a. Use the word "you" as often as possibleb. Demonstrate genuine interest in the audience's needc. Explain exactly what the audience needs to do to comply with the messaged. Single out the reader's achievements and why you want to do business with him or here. Create an emotional reaction in the reader

Answers

What is the attitude of "you"? In literature, the "you" attitude emphasizes the wants and interests of the reader. It indicates that the author makes an effort to consider the reader's viewpoint and using language that will help them feel appreciated and important.

The "you" attitude is the opposite of the "I" attitude, where the writer is more concerned about himself than the audience. How can a writer best convey the "you" attitude? A writer can best convey the "you" attitude by demonstrating genuine interest in the audience's needs. This means using words that show that the writer cares about the readers and is trying to help them. For example, instead of saying, "I want to tell you about our product," the writer could say,

"You'll love our product because it will make your life easier." By doing this, the writer is making the reader feel valued and important. The writer should also avoid using words that make the reader feel like they are being talked down to or belittled, as this will create a negative reaction in the reader.

Read more about "you" attitude? here;https://brainly.com/question/25379849

#SPJ11

Valley Company’s adjusted trial balance on August 31, its fiscal year-end, follows. It categorizes the following accounts as selling expenses: sales salaries expense, rent expense—selling space, store supplies expense, and advertising expense. It categorizes the remaining expenses as general and administrative.




Debit Credit


Merchandise inventory (ending) $ 32,000


Other (noninventory) assets 128,000


Total liabilities $ 36,960


Common stock 43,076


Retained earnings 64,560


Dividends 8,000


Sales 218,880


Sales discounts 3,349


Sales returns and allowances 14,446


Cost of goods sold 85,312


Sales salaries expense 29,987


Rent expense—Selling space 10,287


Store supplies expense 2,627


Advertising expense 18,605


Office salaries expense 27,360


Rent expense—Office space 2,627


Office supplies expense 876


Totals $ 363,476 $ 363,476


Beginning merchandise inventory was $25,824. Supplementary records of merchandising activities for the year ended August 31 reveal the following itemized costs.





Invoice cost of merchandise purchases $ 94,080


Purchases discounts received 1,976


Purchases returns and allowances 4,516


Costs of transportation-in 3,900



Required:



1. Compute the company’s net sales for the year.


2. Compute the company’s total cost of merchandise purchased for the year.


3. Prepare a multiple-step income statement that includes separate categories for net sales, cost of goods sold, selling expenses, and general and administrative expenses.


4. Prepare a single-step income statement that includes these expense categories: cost of goods sold, selling expenses, and general and administrative expenses

Answers

It categorizes net operating loss accounts as selling expenses: sales salaries expense,selling space, store supplies expense, The entire cost of goods purchased by the business throughout the year was $178,865, and its net operating loss was $143,997.

A corporation has a net operating loss (NOL) when its operational costs for a given tax period are greater than its operating income. The ability of an organisation to continue paying.

Employees in future fiscal years in order to balance out its available pay in those years is ultimately a negative measure of available pay. An organisation, for instance

Would have a NOL of $500,000 if it had working costs of $1 million during a fiscal year but only $500,000 in

Price of sold goods: 38,400

Cost of salaries is 35,000

Rent costs were 15,000

Cost of advertising: 9,800

Total 169,200 169,200

the final entries ought to be:

Dr Sales earnings were 107750 Cr. Summary of Income 107,750 Dr. Summary of Income 110,270 Cr. 39,340 Cr. is the cost of goods sold. Cost of salaries: 35,000 Cr. Rent costs 15,000 Cr. $9,800 in advertising expenses Cost of supplies: 2,950 Cr. Cost of insurance: 1,880 Cr Cost of depreciation: 6,300. This NOL is subject to a cap, which varies based on the country's tax laws where the business is based. Sales incentives of $2,000.

To know more about net operating loss visit:

https://brainly.com/question/31092154

#SPJ4

suppose the chester company shifts focus to only competing in the thrift and nano segments, while competing on price by reducing costs and passing the savings to the customers, what strategy would they be implementing? select : 1 save answer broad differentiation broad cost leader niche differentiation niche cost leader\

Answers

The strategy that the Chester Company would be implementing if it shifts focus to only competing in the thrift is called niche cost leadership. Correct option is D.

Niche cost leadership involves targeting a narrow market segment with a lower cost structure than competitors. This allows the company to offer products or services at lower prices while maintaining a competitive advantage in the market.

By reducing costs and passing the savings on to customers, the Chester Company would be able to attract price-sensitive consumers in the thrift and nano segments.

This strategy is different from broad cost leadership, which involves targeting a larger market with a lower cost structure than competitors.

Niche cost leadership allows a company to focus on a specific market segment and provide a specialized product or service at a lower cost than competitors in that segment.

Overall, niche cost leadership is an effective strategy for companies that want to achieve a competitive advantage in a specific market segment while offering lower prices to price-sensitive customers.

Correct option is D.

To learn more about strategy click on,

https://brainly.com/question/17271994

#SPJ4

Complete question is:

suppose the chester company shifts focus to only competing in the thrift and nano segments, while competing on price by reducing costs and passing the savings to the customers, what strategy would they be implementing?

a) broad differentiation

b) broad cost leader

c) niche differentiation

d) niche cost leader

at the accounting break-even point, mountain hardware gear sells 14,600 snowboard masks at a price of $10 each. at this level of production, the depreciation is $58,000 and the variable cost per unit is $4. what is the amount of the fixed costs at this production level?

Answers

If level of production, the depreciation is $58,000 and the variable cost per unit is $4 the amount of fixed costs at this production level is $29,600.

The accounting break-even point is the level of sales at which a company's total revenues are equal to its total expenses, both fixed and variable. At this point, the company has not yet generated a profit, but it has also not incurred a loss.

To calculate the fixed costs at the accounting break-even point, we can use the following formula:

Fixed costs = (Sales price per unit x Break-even quantity) - (Variable cost per unit x Break-even quantity) - Depreciation

Using the information given in the question, we can plug in the values as follows:

Fixed costs = ($10 x 14,600) - ($4 x 14,600) - $58,000

Fixed costs = $146,000 - $58,400 - $58,000

Fixed costs = $29,600

To learn more about break-even click on,

https://brainly.com/question/29511772

#SPJ4

If a firm can create important complements to its original product, it has a. created an uncontrollable factor that can change the demand for its product b. created an uncontrollable factor that cannot change the demand for its product c. created a controllable factor that can change the demand for its product d. created a controllable factor that cannot change the demand for its product

Answers

If a firm can create important complements to its original product, it has created a controllable factor that can change the demand for its product. Complements are products or services that are used together with the original product, and they enhance the value of the original product. For example, if a company sells video game consoles, it can create complementary products such as video games and accessories such as controllers and headphones. These complementary products can increase the overall value of the video game console, and as a result, they can increase the demand for the console.

Since the firm has control over the creation and marketing of complementary products, it can strategically use them to change the demand for its product. For instance, the firm can create complementary products that cater to different segments of the market or target specific consumer needs. In doing so, the firm can expand its customer base and increase its sales.

However, it is important to note that creating complementary products is not an uncontrollable factor that can change the demand for the original product. The firm has control over the creation and marketing of complementary products, and it can choose to adjust its strategy to meet changing market demands. Therefore, if a firm can create important complements to its original product, it has created a controllable factor that can change the demand for its product.

Know more about "complementary products".

https://brainly.com/question/28333777

#SPJ11

iris company has provided the following information regarding two of its items of inventory at year-end: there are 100 units of item a, having a cost of $20 per unit, a selling price of $24 and a cost to sell of $6 per unit. there are 50 units of item b, having a cost of $50 per unit, a selling price of $56 and a cost to sell of $4 per unit. how much is the ending inventory using lower of cost or net realizable value?

Answers

The total value of ending inventory using the lower of cost or net realizable value method for Iris Company is $4,600.

The lower of cost or net realizable value (LCNRV) method is used to determine the value of inventory on a company's balance sheet. Under this method, inventory is recorded at the lower of its historical cost or net realizable value (NRV). NRV is the estimated selling price of inventory, less any selling costs.

To calculate the ending inventory using the LCNRV method for Iris Company, we need to compare the cost of each item to its NRV. For item A, the NRV is $18 ($24 selling price - $6 cost to sell). Since the cost per unit is lower than the NRV, the value of the ending inventory for item A is $2,000 (100 units x $20 cost per unit).

For item B, the NRV is $52 ($56 selling price - $4 cost to sell). Since the cost per unit is higher than the NRV, the value of the ending inventory for item B is $2,600 (50 units x $52 NRV per unit).

Therefore, the total value of ending inventory using the LCNRV method for Iris Company is $4,600 ($2,000 for item A + $2,600 for item B).

To learn more about inventory click on,

https://brainly.com/question/15852977

#SPJ4

in a certain company, one accountant records most of the adjusting journal entries at the end of the month. what type of analysis could be used to identify that this happens, as well as the cumulative size of the transactions the accountant records?

Answers

In a certain company, if an accountant records most of the adjusting journal entries at the end of the month, a combination of horizontal and vertical analysis can be used to identify this occurrence and determine the cumulative size of the transactions recorded.

Horizontal analysis involves comparing financial data over a period of time, such as monthly or yearly. By analyzing the trends in the financial statements, you can identify patterns and anomalies that suggest the majority of adjustments are made at the end of the month. This analysis will highlight any significant changes in the accounts, such as an unusual spike in transactions during the last few days of the month.

Vertical analysis, on the other hand, focuses on the relationships between various accounts within a single period. It calculates the proportion of each line item to a specific base, such as total assets or net sales. By examining the percentages of various accounts in relation to the base, you can determine if the accountant's adjustments significantly impact the overall financial position of the company.

In conclusion, a combination of horizontal and vertical analysis can help identify the pattern of an accountant recording most adjusting journal entries at the end of the month, as well as estimate the cumulative size of the transactions they record. By carefully examining the trends and relationships within the financial statements, it is possible to gain insights into the company's accounting practices and make informed decisions based on the data.

For more such questions on journal entries

https://brainly.com/question/28044739

#SPJ11

(l.o. 1) on january 1, 2020, alton co. purchased $100,000 of 10%, olson, inc. bonds with interest payable on july 1 and january 1 for $107,000. on february 1, 2020, alton purchased $100,000 of 12%, ehrlich co. bonds with interest payable on august 1 and february 1 for $95,000. alton classifies the olson and ehrlich bonds as trading debt securities. on december 31, 2020, the fair value of the olson and ehrlich bonds are $110,000 and $94,000, respectively. at december, 2020, what adjusting entry should be made by alton

Answers

The adjustment entry for Alton at December 31, 2020, should reflect the change in the fair value of the trading debt securities, which are the Olson and Ehrlich bonds.

For the Olson bonds, the fair value has increased from $107,000 to $110,000. Therefore, Alton has an unrealized gain of $3,000 ($110,000 - $107,000).

For the Ehrlich bonds, the fair value has decreased from $95,000 to $94,000. Therefore, Alton has an unrealized loss of $1,000 ($94,000 - $95,000).

The adjusting entry for Alton at December 31, 2020, would be:

Unrealized Gain/Loss on Trading Debt Securities           $2,000

    Olson Bonds                                                            $3,000

    Ehrlich Bonds                                                          ($1,000)

This entry increases the unrealized gain on the Olson bonds and decreases the unrealized loss on the Ehrlich bonds. The net effect is an increase in Alton's net income by $2,000.

To know more about adjusting entry , refer here :

https://brainly.com/question/30696995

#SPJ11

Which of the following is not true concerning the usage of public land. a. public land is managed by federal and state agencies. b. unprotected lands exist inside federal parks. c. public land can be protected or unprotected. d. wilderness areas and state parks are protected. please select the best answer from the choices provided a b c d

Answers

The statement that is not true concerning the usage of public land is unprotected lands exist inside federal parks. The correct option is b.

The correct answer to the question is "b. unprotected lands exist inside federal parks." This statement is not entirely true since all lands inside federal parks are protected by law. Public lands can either be protected or unprotected, and they are managed by federal and state agencies. Wilderness areas and state parks are examples of protected public lands. Unprotected public lands, on the other hand, are open to commercial and recreational uses such as mining, grazing, and hunting. The management of public lands is essential to ensure that they are used sustainably and for the benefit of all.

The federal government and state agencies have various management practices in place to regulate the use of public lands, including zoning, permits, and conservation easements. Public lands are crucial to maintaining biodiversity, conserving natural resources, and providing opportunities for recreation, education, and scientific research. Protecting and managing public lands is crucial to ensure their long-term conservation and sustainable use for future generations. The correct option is b. unprotected lands exist inside federal parks.

For more about unprotected:

https://brainly.com/question/1809820

#SPJ11

When making a payment from the petty cash fund for postage stamps, the following journal entry is made.

a. debit supplies; credit petty cash
b. debit postage expense; credit petty cash
c. debit miscellaneous expense; credit petty cash
d. no entry is made.

Answers

When making a payment from the petty cash fund for postage stamps, the b. debit postage expense; credit petty cash journal entry is made.

When making a payment from the petty cash fund for postage stamps, the appropriate journal entry is to debit the postage expense account to record the expense incurred for purchasing the stamps.

At the same time, the petty cash account is credited to reflect the reduction in the cash balance within the petty cash fund. This ensures accurate tracking of expenses and maintains the integrity of the petty cash account.

It is important to allocate the expense to the correct expense account (postage expense in this case) for proper financial reporting and analysis.

To know more about debit postage refer here:

https://brainly.com/question/29720488#

#SPJ11

wireless solutions reports operating expenses of $935,000. operating expenses include both rent expense and salaries expense. prepaid rent increases during the year by $25,000 and salaries payable increases by $17,500. what is the cash paid for operating expenses during the year?

Answers

If prepaid rent increases during the year by $25,000 and salaries payable increases by $17,500, the cash paid for operating expenses during the year was $1,862,500.

To calculate the cash paid for operating expenses during the year, we need to adjust the reported operating expenses by changes in prepaid rent and salaries payable.

The increase in prepaid rent during the year represents cash paid in advance for rent expense that has not yet been incurred. Therefore, we need to subtract the increase in prepaid rent from the reported operating expenses to determine the actual cash paid for rent expense during the year:

Reported rent expense = Operating expenses - Increase in prepaid rent

Reported rent expense = $935,000 - $25,000

Reported rent expense = $910,000

Similarly, the increase in salaries payable during the year represents cash paid for salaries expense that has not yet been recorded.

Therefore, we need to add the increase in salaries payable to the reported operating expenses to determine the actual cash paid for salaries expense during the year:

Cash paid for salaries = Operating expenses + Increase in salaries payable

Cash paid for salaries = $935,000 + $17,500

Cash paid for salaries = $952,500

Adding the adjusted rent expense and salaries expense together gives us the total cash paid for operating expenses during the year:

Total cash paid for operating expenses = Cash paid for rent expense + Cash paid for salaries expense

Total cash paid for operating expenses = $910,000 + $952,500

Total cash paid for operating expenses = $1,862,500

To learn more about expenses click on,

https://brainly.com/question/17232326

#SPJ4

Bob wants to sell his home and doesn’t want to pay a fee, but he realizes he might have more prospects if he uses a broker. Bob puts the following ad in the paper, "Large lot, 3 bedrooms, energy features, 121 Gilmore court – Broker’s welcome, will pay 3%. " If several brokers accept Bob’s offer and bring buyers through the property, what type of listing agreement might they have with Bob?

Answers

In this scenario, the type of listing agreement they have with Bob's Open listing.

The option (A) is correct.

Open listing is an authoritative arrangement under which the posting dealer goes about as the specialist or as the lawfully perceived non-office illustrative of the seller(s), and the seller(s) consents to pay a commission to the posting merchant provided that the property is sold through the endeavors of the posting intermediary.

In an open listing, vendors dispose of the selectiveness provision with the deal enlist arrangement. This implies the proprietor can find and sell the actual home assuming that they decide to. They additionally can recruit however many land merchants and specialists to sell the posting as could be allowed.

Learn more about listing agreement:

https://brainly.com/question/14465018

#SPJ4

This question is not complete, Here I am attaching the complete question:

Bob wants to sell his home and doesn’t want to pay a fee, but he realizes he might have more prospects if he uses a broker. Bob puts the following ad in the paper, "Large lot, 3 bedrooms, energy features, 121 Gilmore court – Broker’s welcome, will pay 3%. " If several brokers accept Bob’s offer and bring buyers through the property, what type of listing agreement might they have with Bob?

(A) Open listing

(B) grand jury

(C) rights and health

Suppose the government imposes a tax in a certain market in order to internalize an externality. This type of policy is based on which of the ten principles of economics? a. Markets are usually a good way to organize economic activity. B. People respond to incentives. C. People face trade-offs. D. The cost of something is what you give up to get it

Answers

Consider a scenario in which a tax is levied by the government to internalize an externality in a certain market. This kind of policy is founded on the idea that incentives make individuals act in certain ways. Here option B is the correct answer.

The imposition of a tax in a market to internalize an externality creates a financial incentive for producers and consumers to take into account the social costs associated with their production and consumption decisions. By taxing the activity that generates negative externalities, such as pollution, the government increases the cost of engaging in that activity, making it less attractive to producers and consumers.

This type of policy is an example of how incentives can be used to modify behavior in a way that benefits society as a whole. In this case, the goal is to reduce the negative externalities associated with the market activity, which would not be achieved if the market were left to operate freely.

Therefore, the policy of imposing taxes to internalize an externality is based on the principle that people respond to incentives, as it seeks to alter the behavior of individuals and firms by making them take into account the social costs of their actions.

To learn more about internalize

https://brainly.com/question/24790599

#SPJ4

Angela, inc., holds a 90 percent interest in corby company. during 2020, corby sold inventory costing $87,100 to angela for $134,000. of this inventory, $57,200 worth was not sold to outsiders until 2021. during 2021, corby sold inventory costing $115,500 to angela for $210,000. a total of $63,000 of this inventory was not sold to outsiders until 2022. in 2021, angela reported separate net income of $174,000 while corby's net income was $132,000 after excess amortizations. what is the noncontrolling interest in the 2021 income of the subsidiary

Answers

The non-controlling interest in the 2021 income of the subsidiary is $9,759.40.

The non-controlling interest in the 2021 income of the subsidiary can be calculated by first determining the equity income from the subsidiary, adjusting for unrealized profits, and then finding the noncontrolling interest's share of the adjusted income.

Step 1: Calculate the equity income from Corby
Angela's ownership percentage = 90%
Corby's net income = $132,000
Equity income from Corby = 90% * $132,000 = $118,800

Step 2: Adjust for unrealized profits
2020 inventory not sold until 2021:
Gross profit = $134,000 - $87,100 = $46,900
Unrealized profit in 2020 = ($57,200 / $134,000) * $46,900 = $19,878
Realized profit in 2021 = $46,900 - $19,878 = $27,022

2021 inventory not sold until 2022:
Gross profit = $210,000 - $115,500 = $94,500
Unrealized profit in 2021 = ($63,000 / $210,000) * $94,500 = $28,350

Step 3: Adjust equity income for realized and unrealized profits
Adjusted equity income = $118,800 - $19,878 + $27,022 - $28,350 = $97,594

Step 4: Calculate the noncontrolling interest's share of the adjusted income
Noncontrolling interest percentage = 100% - 90% = 10%
Noncontrolling interest in 2021 income = 10% * $97,594 = $9,759.40

Therefore, the non-controlling interest in the 2021 income of the subsidiary is $9,759.40.

Learn more about Equity income: https://brainly.com/question/3224984

#SPJ11

What benchmark is used for standard pace?What advantages does the continuous method of watch recordingoffer over the snapback method?Why are allowances applied to the normal time?topic: Ergonomic

Answers

The benchmark used for standard pace is typically 120 steps per minute. The continuous method of watch recording offers advantages over the snapback method, such as more accurate measurements and less interruption.

Standard pace benchmark: The standard pace benchmark is typically set at 120 steps per minute for ergonomic purposes. This pace is considered to be the most efficient and effective for normal walking and reduces the risk of musculoskeletal disorders.

Continuous watch recording: The continuous method of watch recording involves measuring the time taken to complete a task continuously, without stopping the watch. This method is more accurate than the snapback method as it records the actual time taken for a task, without interruptions.

Snapback watch recording: The snapback method involves stopping and starting the watch during a task. This method is less accurate than the continuous method as it can result in missed time and interruptions that affect the accuracy of the measurement.

Allowances for normal time: Allowances are applied to the normal time to account for factors such as fatigue, rest breaks, and other factors that may affect the pace of work. These allowances ensure that the standard pace is maintained consistently throughout the workday and reduce the risk of ergonomic injuries.

For more questions like Benchmark click the link below:

https://brainly.com/question/18560216

#SPJ11

promotion helps consumers because it group of answer choices informs consumers and places them in a position to specify the products that they seek. tends to be informative and not persuasive. costs billions of dollars each year, which stimulates the u.s. economy. persuades consumers to make the right choices. always stresses wholesome values, which benefits society.

Answers

Promotion helps consumers because it informs consumers and places them in a position to specify the products that they seek. So, correct option is A.

Promotion is a marketing activity that aims to inform and persuade potential customers about a product or service. It includes various methods such as advertising, personal selling, sales promotion, public relations, and direct marketing.

By informing consumers about a product's features, benefits, and availability, promotion helps them make informed decisions about what they want to buy.

Consumers can learn about the different products available in the market and choose the one that best meets their needs and preferences. This puts consumers in a position to specify the products they seek and ultimately leads to a more efficient and effective market.

However, it is important to note that not all promotion is informative and not all persuasive promotion is intended to persuade consumers to make the "right" choices. Some promotions may be misleading or manipulative, and it is essential for consumers to be critical and discerning when evaluating promotional messages.

In conclusion, promotion can be beneficial for consumers when it provides them with accurate and useful information about products and services, which allows them to make informed decisions.

So, correct option is A.

To learn more about Promotion click on,

https://brainly.com/question/29438166

#SPJ4

Complete question is:

Promotion helps consumers because it group of answer choices

A) informs consumers and places them in a position to specify the products that they seek.

B) tends to be informative and not persuasive.

C) costs billions of dollars each year, which stimulates the u.s. economy.

D) persuades consumers to make the right choices.

E) always stresses wholesome values, which benefits society.

Read the fictional scenario and respond to the checklist items in a 2- to 3-page paper with an additional title page and reference page.
Scenario (fictional): The following four employees have different attitudes towards their jobs and different levels of job satisfaction which impact their behavior on the job at this beverage company. You are the human resources (HR) director who is becoming concerned regarding the behavior of some employees at work. Read the following background information on each of the four employees and address all the checklist items.
Employee #1: Marketing product manager: She experiences cognitive dissonance every time her boss tells her she should not worry about the lower end of the market as "those people don’t have much buying power," when the company’s values statement says that the company values the welfare of everyone everywhere. She comes from a blue-collar family and resents the attitude of her boss towards low-income groups. She is frequently late to work, and her boss has given her a warning as a result.
Employee #2: Engineer: He is in a highly visible job creating new products that creates a lot of stress, and he works 12-hour days. He is loyal but feels depressed by the constant work. He is starting to look at job openings online in his off hours because his current long hours are starting to affect his family life.
Employee #3: Loading dock manager: This representative works the 12 a.m. – 7 a.m. shift. She does what is required but complains in the employee break room about the offices and work conditions when she is on break. The other employees tend to agree with her when she complains. Lately the distribution supervisor has noted employees’ reduced effort on the shift.
Employee #4: Distribution lead: He is the sole Hispanic employee in the organization and feels isolated, as though he is just a placeholder versus really making a recognized difference in the organization. The company promotes itself as a diverse organization, which he knows is not true. He feels as if everyone expects him to fail since not many people engage with him, including his boss, on any regular basis.
Checklist:
The four employees have different attitudes and levels of job satisfaction.
Describe the attitudes and job satisfaction of each of the four employees.
Categorize and explain the responses the employees have to dissatisfaction based on the reading.
Explain how the above attitudes and job satisfaction for each employee impact the organization in terms of profit, employee turnover, and affecting other employees’ attitudes.
Include at least two scholarly* citations with accompanying references regarding attitudes and job satisfaction and the impact on the organization that support your responses to the checklist item above.
Explain what each of the managers of the four employees can do to change the employees’ attitudes for the better (referencing at least two of Mintzberg’s managerial roles to explain your response).

Answers

My title for this paper is: "Impact of Attitudes and Job Satisfaction on Employees’ Behavior in the Workplace"

Introduction:

As the HR director of a beverage company, it is concerning to observe the varying attitudes and levels of job satisfaction among the four employees described in the scenario. In this paper, we will describe each employee's attitudes and job satisfaction, categorize their responses to dissatisfaction, examine their impact on the organization in terms of profit, employee turnover, and other employees' attitudes, suggest ways to improve their attitudes, and refer to Mintzberg's managerial roles.

Employee Attitudes and Job Satisfaction:

Employee #1, the marketing product manager, experiences cognitive dissonance, feels resentment, and is frequently late to work. Employee #2, the engineer, is stressed, depressed, and is starting to look for job openings elsewhere. Employee #3, the loading dock manager, complains about work conditions and reduced effort on the shift. Employee #4, the distribution lead, feels isolated and unsupported, and expects to fail.

Responses to Dissatisfaction:

Employee #1, the marketing product manager, experiences cognitive dissonance and becomes frequently late to work. Employee #2, the engineer, starts to look for job openings elsewhere. Employee #3, the loading dock manager, complains about work conditions and reduced effort on the shift, and employees tend to agree with her. Employee #4, the distribution lead, feels isolated and unsupported, and expects to fail.

Impact on the Organization:

The employees' negative attitudes and low job satisfaction may result in decreased profit due to reduced productivity and increased employee turnover. Employee complaints may also affect other employees' attitudes, leading to reduced effort and productivity.

Improving Employee Attitudes:

Managers can use Mintzberg's interpersonal roles, such as being a figurehead and leader, to improve employees' attitudes by being visible, supportive, and providing recognition and encouragement. They can also use Mintzberg's informational roles, such as monitoring, disseminating, and spokesperson, to communicate clearly about organizational values and diversity initiatives.

Conclusion:

The HR director should take proactive measures to address the concerns of the employees described in the scenario, such as providing training on cognitive dissonance, stress management, and diversity and inclusion. Additionally, managers should use Mintzberg's managerial roles to create a positive work environment that supports employees' job satisfaction and motivation.

References:

Locke, E. A. (1969). What is job satisfaction? Organizational Behavior and Human Performance, 4(4), 309-336. https://doi.org/10.1016/0030-5073(69)90013-0Spector, P. E. (1997). Job satisfaction: Application, assessment, causes, and consequences. Sage Publications.

Learn more about Job Satisfaction: https://brainly.com/question/10735969

#SPJ11

Prepare the necessary journal entries on the books of Tri-State Carpet Company to record the following transactions, assuming a periodic inventory system.
a. Tri-State purchased $40,000 of merchandise on account, terms 2/10, n/30.
b. Returned $4,000 of damaged merchandise for credit.
c. Paid for the merchandise purchased within 10 days.

Answers

In accounting, inventory valuation refers to the method adopted by the business entity to record inventory on the balance sheet. It can be in the form of LIFO, Specific Identification, FIFO, etc.

Answer and Explanation:
Using the periodic inventory method, the above transactions must be recorded as follows.

Item Account Title Debit Credit
a Purchases $40,000
Accounts Payable $40,000
b Accounts Payable $4,000
Purchased Return and Allowances $4,000
c Accounts Payable
($40,000 - $4,000) $36,000
Purchased Discount
(($40,000 - $4,000) x 2%) $720
Cash ($36,000 - $720) $35,280
Tri-State Carpet Company paid the liability within the 10-day discount period given by the seller. It is the reason Tri-State Company is allowed to avail the 2% discount.

Here's the breakdown of each transaction for Tri-State Carpet Company:

a. Purchased $40,000 of merchandise on account, terms 2/10, n/30:
- Debit: Inventory $40,000
- Credit: Accounts Payable $40,000

b. Returned $4,000 of damaged merchandise for credit:
- Debit: Accounts Payable $4,000
- Credit: Inventory $4,000

c. Paid for the merchandise within 10 days (with 2% discount):
- Debit: Accounts Payable $36,000
- Credit: Cash $35,280
- Credit: Inventory $720

These entries reflect the purchase, return of damaged goods, and payment with a discount for Tri-State Carpet Company under a periodic inventory system.

Learn more about Carpet here:

https://brainly.com/question/18297841

#SPJ11

What is a common risk associated with outsourcing softwaredevelopment?a) risk of breach of confidential informationb) lack of flexibility to respond to rapid market changesc) short term contracts

Answers

A common risk associated with outsourcing software development is a risk of breach of confidential information.The correct option is a).

Outsourcing software development is when a company chooses to outsource a portion of its software development to a third-party vendor. For various reasons, outsourcing software development is often popular with businesses. The most common reason for outsourcing software development is cost reduction.

There are several risks associated with outsourcing software development, some of which are:

Risk of breach of confidential informationRisk of poor quality workRisk of missed deadlines and poor communicationRisk of poor security practicesRisk of cultural barriersRisk of poor vendor management

Therefore, option a) risk of breach of confidential information is a common risk associated with outsourcing software development.

You can learn more about outsourcing software development at

https://brainly.com/question/14497440

#SPJ11

What are example types of momentum as a key quant factor in the stock market? which answer is right?

a) hiring momentum
b) earnings momentum
c) operational efficiency momentum

Answers

B) earnings momentum is a types of momentum as a key quant factor in the stock market.

Earnings momentum is a key quantitative factor used in the stock market to evaluate a company's financial performance over time. It is the rate at which a company's earnings are increasing or decreasing, and is often used as an indicator of future earnings potential. Stocks with positive earnings momentum are typically seen as attractive investment opportunities, while stocks with negative earnings momentum may be seen as less attractive.

Hiring momentum and operational efficiency momentum are not typically used as quant factors in the stock market, although they may be considered by some investors as part of a broader analysis of a company's overall performance.

learn more about stock market. here:

https://brainly.com/question/13400473

#SPJ11

the following data have been recorded for the production of product a-11 in the current period. direct materials cost was $2,039. a total of 32 direct labor-hours and 175 machine-hours were worked to make the product. the direct labor wage rate is $14 per labor-hour. the company allocates manufacturing overhead on the basis of machine-hours. the predetermined overhead rate is $15 per machine-hour. the total cost for product a-11 for the current period would be:

Answers

The total cost for product a-11 in the current period is $5,112.

To determine the total cost for product a-11 in the current period, we need to consider the direct materials cost, direct labor cost, and manufacturing overhead cost.
The direct materials cost for product a-11 was $2,039. This cost includes all the materials that were used to manufacture the product. For direct labor cost, we need to know the number of direct labor-hours worked and the wage rate per hour. The data provided states that 32 direct labor-hours were worked and the wage rate is $14 per labor-hour. Therefore, the direct labor cost for product a-11 is:
32 hours x $14 per hour = $448
Finally, we need to calculate the manufacturing overhead cost. The company allocates manufacturing overhead based on machine-hours, and the predetermined overhead rate is $15 per machine-hour. The data provided states that 175 machine-hours were worked to make product a-11. Therefore, the manufacturing overhead cost for product a-11 is:
175 machine-hours x $15 per machine-hour = $2,625
To determine the total cost for product a-11, we add the direct materials cost, direct labor cost, and manufacturing overhead cost:
$2,039 (direct materials) + $448 (direct labor) + $2,625 (manufacturing overhead) = $5,112

For more such questions on cost

https://brainly.com/question/29509552

#SPJ11

Mr. Smith acquired a property consisting of one acre of land and a two-story building five years ago for $100,000. He also obtained an $80,000 mortgage loan from ACE Bank to provide financing to complete the purchase. This year, Mr. Smith constructed another building on the property with his own funds at a cost of $20,000. Mr. Smith has decided after completing the building to approach Duce Bank to borrow and mortgage the new building with a $16,000 loan. Is Duce Bank likely to provide the $16,000 in financing

Answers

The likelihood of Duce Bank providing a $16,000 loan to Mr. Smith for the newly constructed building will depend on several factors, including the value of the property, the outstanding balance on the existing mortgage with ACE Bank, and Mr. Smith's creditworthiness.

Ultimately, the decision of whether or not to provide the loan will depend on the specific circumstances of Mr. Smith's situation.

The likelihood of Duce Bank providing a $16,000 loan to Mr. Smith for the newly constructed building will depend on several factors, including the value of the property, the outstanding balance on the existing mortgage with ACE Bank, and Mr. Smith's creditworthiness.

One way to estimate the value of the property is to look at recent sales of similar properties in the area. If similar properties have sold for around $150,000, for example, then Mr. Smith's property might be worth around that amount as well.

If Mr. Smith still owes $70,000 on the original mortgage with ACE Bank, then the total value of the property would be $150,000 - $70,000 = $80,000. This means that the equity in the property (the value of the property minus the outstanding mortgage balance) is $80,000 - $16,000 = $64,000.

If Mr. Smith has good credit and a steady income, then Duce Bank may be willing to provide a loan secured by the newly constructed building. However, if Mr. Smith has poor credit or a history of delinquencies, Duce Bank may be hesitant to extend credit.

Ultimately, the decision of whether or not to provide the $16,000 loan will depend on the specific circumstances of Mr. Smith's situation, including the value of the property, the outstanding mortgage balance, and Mr. Smith's creditworthiness.

To know more about creditworthiness refer here:

https://brainly.com/question/2254218#

#SPJ11

when inflation falls, people question 2 options: make less frequent trips to the bank and firms make less frequent price changes. make less frequent trips to the bank while firms make more frequent price changes. make more frequent trips to the bank while firms make less frequent price changes. make more frequent trips to the bank and firms make more frequent price changes.

Answers

When inflation falls, people may question whether to make less frequent trips to the bank or whether firms should make less frequent price changes. Inflation refers to the increase in the prices of goods and services over time, leading to a decrease in the purchasing power of money.

When inflation falls, it means that prices are increasing at a slower rate, and there is less pressure on individuals and firms to adjust their behaviors.
One option for individuals when inflation falls is to make less frequent trips to the bank. When inflation is high, people tend to make more frequent trips to the bank to withdraw money to keep up with the rising prices. However, when inflation falls, there is less need to withdraw money, and people may choose to make fewer trips to the bank.
On the other hand, firms may decide to make less frequent price changes when inflation falls. Inflation often leads to firms raising prices to maintain their profit margins. However, when inflation falls, firms may not need to raise prices as frequently to maintain their profit margins. Therefore, they may choose to make fewer price changes.
Overall, when inflation falls, people may choose to make less frequent trips to the bank, and firms may make less frequent price changes. However, it is important to note that this is not always the case, as other factors can influence individual and firm behavior. For instance, firms may choose to make more frequent price changes to stay competitive in the market or to adjust for changes in production costs. Similarly, individuals may need to withdraw money from the bank for other reasons unrelated to inflation.

For more such questions on price

https://brainly.com/question/28479908

#SPJ11

if the projects were independent, which project(s) would be accepted according to the irr method? -select- if the projects were mutually exclusive, which project(s) would be accepted according to the irr method? -select- could there be a conflict with project acceptance between the npv and irr approaches when projects are mutually exclusive? -select-

Answers

IRR for two projects for Bellinger Industries, and we found that Project A has an IRR of approximately 17.65% while Project B has an IRR of approximately 23.07%.

To calculate the IRR for each project, we need to find the discount rate that sets the NPV of the project's cash flows equal to zero. This can be done by using a financial calculator or spreadsheet software like Microsoft Excel. We can also use a trial and error method, where we try different discount rates until we get an NPV that is closest to zero.

For Project A, we can use the formula:

NPV = -1,110 + (790/(1+r)) + (350/(1+r)²) + (250/(1+r)³) + (300/(1+r)⁴) = 0

where r is the IRR we're trying to find. By solving for r using a financial calculator or spreadsheet software, we get an IRR of approximately 17.65%.

For Project B, we can use the same formula:

NPV = -1,110 + (390/(1+r)¹) + (285/(1+r)²) + (400/(1+r)³) + (750/(1+r)⁴) = 0

Again, by solving for r using a financial calculator or spreadsheet software, we get an IRR of approximately 23.07%.

To know more about IRR here

https://brainly.com/question/14120890

#SPJ4

Complete Question:

Bellinger Industries is considering two projects for inclusion in its capital budget, and you have been asked to do the analysis. Both projects' after-tax cash flows are shown on the time line below. Depreciation, salvage values, net operating working capital requirements, and tax effects are all included in these cash flows. Both projects have 4-year lives, and they have risk characteristics similar to the firm's average project. Bellinger's WACC is 12%. 0 2 3 4 Project -1,110 790 350 250 300 Project -1,110 390 285 400 750

What is Project A's IRR? Do not round intermediate calculations. Round your answer to two decimal places.

What is Project B's IRR? Do not round intermediate calculations. Round your answer to two decimal places.

Explain the impact that two different backgrounds could have on the interpretation of text

Answers

The impact that two different backgrounds could have on the interpretation of a text is significant as each individual's personal experiences, cultural identity, and education can shape their understanding and perception of the written material.

For example, consider a reader with a background in literary analysis who is familiar with symbolism and metaphorical language. They may interpret a text on a deeper level, connecting themes and ideas to broader cultural or historical contexts. On the other hand, a reader with a background in science or mathematics might focus on the logical structure and clarity of the argument presented in the text, and may not pick up on the subtle literary nuances.

Cultural background can also play a significant role in the interpretation of a text. For instance, a reader from a collectivist culture might emphasize the importance of family, community, and social harmony when interpreting a text, while a reader from an individualist culture may focus on personal freedom, autonomy, and individual achievements.

In conclusion, an individual's background can greatly impact their interpretation of a text, as personal experiences, cultural identity, and education can shape their understanding of the material. Recognizing these differences can help promote open-mindedness and mutual understanding when discussing and interpreting texts.

For more about interpretation:

https://brainly.com/question/30932003

#SPJ11

Other Questions
Alexandre has two brothers: Hugo and Romain. Every day Romain draws a name out of a hat to randomly select one of the three brothers to wash the dishes. Alexandre suspected that Romain is cheating, so he kept track of the draws, and found that out of 121212 draws, Romain didn't get picked even once.Let's test the hypothesis that each brother has an equal chance of 1331 start fraction, 1, divided by, 3, end fraction of getting picked in each draw versus the alternative that Romain's probability is lower.Assuming the hypothesis is correct, what is the probability of Romain not getting picked even once out of 121212 times? Round your answer, if necessary, to the nearest tenth of a percent. what principal will earn $67.14 interest at 6.25% for 82 days? Which equations will find the distance between the lions and giraffes? Select all that apply. 11+16 = c 112+ 162 = c2 c2+ 162 = 112 121+ 256 = c2 11(2)+16(2) = 2c Select all the polygons that can be formed by the intersection of a plane and a cylinder either parallel or perpendicular to the base? The owner of a bike shop would like to analyze the sales data to determine if the business is growing, declining, or remaining flat. The owner has the following data:Sales Revenue Last Year =$125,000Sales Revenue Current Year = $150, 000What is the Sales Growth?Do not forget to type the % symbol after multiplying your result by 100 to convert to percentage!Hint: Your answer will NOT have decimal point.Example: 75% In the 1910s, what was legally allowed in the US?marriage between people of the same genderbanning LGBTQ+ people from the militarydenying citizenship for Indigenous peopleaccess to mainstream classrooms for all children What rate of interest compounded annually is required to double an investment in 29 years? Round your answer to two decimal places evaluate : 20-[5+(9-6] A brief description on service quality dimension andcustomer satisfaction on Pathao company. What features have allowed insects to become such a successful and diverse group?. Which scatter plot below would best be modeled by using linear regression? A savings account balance is compounded annually. if the interest rate is 2% per year and the current balance is $1430.00 what will the balance be 8 years from now A vertical spring scale can measure weights up to 215 n . the scale extends by an amount of 10.5 cm from its equilibrium position at 0 n to the 215 n mark. a fish hanging from the bottom of the spring oscillates vertically at a frequency of 2.50 hz . A 0.050 kg bullet strikes a 5.0 wooden block and embeds itself Zola wrote the area of the rectangle as `2a+3a+4a`. amir wrote the area as `(2+3+4) a. explain why they are both correctplease help as quickly as possibleassp pls solve this asap This ladder is extended to a length of 18 feet. The bottom of the ladder is 4. 5 feet from the base of the building. What angle does the ladder make with the ground? please help! it is matrices, so it should be rlly easy. Before European settlers arrived the Great Plans of North America were you want to organize frequently used commands in groups on a new tab on the ribbon. what is the first step?(1 point) add a new tab to the ribbon. create a group on an existing tab. rename the default group name. add commands to a blank ribbon.