Does time stand still in space

Answers

Answer 1

Answer:

[tex]\underline{\textsf{\textbf{Answer -}}}[/tex]

No & Yes - the case depends actually.

You can't make the velocity zero and expect to stay in space. you will need to constantly fire the engine to hold youself in position (this is possible, until you run out of fuel).

Yes, it is possible to fire the engine and lift off earth into space, and then fire in the opposite direction to earths movement until you are still, relative to the sun. But if you now turn the engine off, the suns gravity will pull you down and directly into the sun.

its the earths forward motion that prevents it falling into the sun

Answer 2

Answer:

No & Yes - the case depends actually.

You can't make the velocity zero and expect to stay in space. you will need to constantly fire the engine to hold youself in position (this is possible, until you run out of fuel).

Yes, it is possible to fire the engine and lift off earth into space, and then fire in the opposite direction to earths movement until you are still, relative to the sun. But if you now turn the engine off, the suns gravity will pull you down and directly into the sun.

its the earths forward motion that prevents it falling into the sun


Related Questions

describe the human condition before Science and technology was practice.​

Answers

Their condition was very very bad .doing everything by themselves

From fastest to slowest, which of the following lists describes the speed at which sound tends to travel in different materials?
A. Gases, solids, liquids
B. Gases, liquids, solids
C. Solids, liquids, gases
D. Solids, gases, liquids

Answers

Answer:

C. Solids,Liquids, Gases

Consider the reaction below Na2CO3 (aq) + CaCl2 (aq) CaCO3 (s) + 2NaCl (aq) If the releases 39.4 kJ of energy, how many kilocalories does it release? (1 cal = 4.184 J) (Round off answer to 2 decimal place)​

Answers

Answer: 9.42

Explanation: yes

A ball is rolling down a hill. Wich action would slow the ball down?

Answers

friction.............................

A 1.50x103-kilogram car is traveling east at 30 meters per second.
The brakes are applied and the car is brought to rest in 9.00 seconds.
A. Calculate the magnitude of the total impulse applied to the car to
bring it to rest. [Show all work, including the equation and
substitution with units.]
B. State the direction of the impulse applied to the car. [East or
West?]


PLEASE HELP!!!!

Answers

Answer:

[tex]39000\ \text{kg m/s}[/tex]

West

Explanation:

m = Mass of car = [tex]1.3\times 10^{3}\ \text{kg}[/tex]

t = Time = 9 seconds

u = Initial velocity = 30 m/s

v = Final velocity = 0

Impulse is given by

[tex]J=m(v-u)\\\Rightarrow J=1.3\times 10^3(0-30)\\\Rightarrow J=-39000\ \text{kg m/s}[/tex]

The magnitude of the total impulse applied to the car to bring it to rest is [tex]39000\ \text{kg m/s}[/tex].

The direction is towards west as the sign is negative.

What is meant by the terms critical mass and supercritical?

Answers

Answer:

Critical mass is the minimum mass of fissionable material required to sustain a nuclear fission reaction, and a supercritical mass, which will provide more than enough neutrons to sustain a fission reaction at the time of detonation.

Explanation:

if the root mean square speed of a gas particle is 200 m/s at a temperature of 400k, at what approximate temperature will urms when kelvin temperature equals 350 m/s

Answers

Answer:

The correct solution is "1230 K".

Explanation:

The given values are:

[tex](V_{rms})_1= 200 \ m/sec[/tex]

[tex](V_{rms})_2= 350 \ m/sec[/tex]

[tex]T_1=400 \ K[/tex]

As we know,

⇒  [tex]V_{rms} \propto \sqrt{T}[/tex]

or,

⇒  [tex]\frac{(V_{rms})_1}{(V_{rms})_2} =\sqrt{\frac{T_1}{T_2} }[/tex]

On substituting the values, we get

⇒  [tex]\frac{200}{350} =\sqrt{\frac{400}{T_2} }[/tex]

⇒   [tex]T_2=1230 \ K[/tex]

Calculate the work done to push a 200-N object 5-meters

Answers

1000 joules
jskskmxk dnd

An object has a mass of 50 kg on Earth. What would be the mass of that object in the Moon

Answers

It would be 50 kg.

Mass doesn't change.

Weight can.

Proton traveling across a capacitor A proton enters with a velocity v between the plates of a capacitor as shown in the figure. What is the direction of the magnetic field needed so that the proton continues its trajectory, undeflected? Explain each step of your reasoning.

Answers

Answer:

Please see the direction of force in the attachment

Explanation:

As the particle enters the capacitor, it experiences electric. In order to move in the same direction as the electron was moving before entering the capacitor, the force due to the electric field of capacitor must be balanced by the magnetic field.

The direction of particle is shown in the attachment.

As we know,

Force = q (v *B)

As an admirer of Thomas Young, you perform a double-slit experiment in his honor. You set your slits 1.01 mm apart and position your screen 3.09 m from the slits. Although Young had to struggle to achieve a monochromatic light beam of sufficient intensity, you simply turn on a laser with a wavelength of 639 nm . How far on the screen are the first bright fringe and the second dark fringe from the central bright fringe

Answers

Answer:

[tex]0.00195\ \text{m}[/tex]

[tex]0.00293\ \text{m}[/tex]

Explanation:

m = Order = 1

D = Distance between screen and slit = 3.09 m

d = Slit distance = 1.01 mm

[tex]\lambda[/tex] = Wavelength = 639 nm

Distance from the first bright fringe from the central bright fringe is given by

[tex]y=\dfrac{m\lambda D}{d}\\\Rightarrow y=\dfrac{1\times 639\times 10^{-9}\times 3.09}{1.01\times 10^{-3}}\\\Rightarrow y=0.00195\ \text{m}[/tex]

Distance from the first bright fringe from the central bright fringe is [tex]0.00195\ \text{m}[/tex]

Distance from the second dark fringe from the central bright fringe is given by

[tex]y=(m+\dfrac{1}{2})\dfrac{\lambda D}{d}\\\Rightarrow y=(1+\dfrac{1}{2})\dfrac{639\times 10^{-9}\times 3.09}{1.01\times 10^{-3}}\\\Rightarrow y=0.00293\ \text{m}[/tex]

Distance from the second dark fringe from the central bright fringe is [tex]0.00293\ \text{m}[/tex].

Why are objects that fall near Earth's surface rarely in free fall?
O Gravity does not act on objects near Earth's surface.
O Air exerts forces on falling objects near Earth's surface.
O The objects do not reach terminal velocity.
O The objects can be pushed upward by gravity.​

Answers

Answer:

Air exerts forces on falling objects near earth's surface

Explanation:

Falling objects are typically subject to air resistance which prevents the force of gravity on the object


How did our Sun form? *

A cloud of stellar dust from part of a Nebula collapsed causing hydrogen atoms to
fuse together.

Many smaller stars became fused together by gravity

It broke off from a larger star in the universe.

Two gas giants from another solar system became fused together by gravity.

Answers

Answer: A cloud of stellar dust from part of a Nebula collapsed causing hydrogen atoms to fuse together

Explanation:

A disk of a radius 50 cm rotates at a constant rate of 100 rpm. What distance in meters will a point on the outside rim travel during 30 seconds of rotation? ​ ​

Answers

Answer:

The point will travel a distance of 15708 centimeters in 30 seconds of rotation.

Explanation:

In this case, we see a disk rotating at constant rate, the travelled distance of a point on the outside rim ([tex]s[/tex]), in centimeters, is determined by using this expression:

[tex]s = \omega \cdot r\cdot t[/tex] (1)

Where:

[tex]\omega[/tex] - Angular speed, in radians per second.

[tex]r[/tex] - Radius of the disk, in centimeters.

[tex]t[/tex] - Time, in seconds.

If we know that [tex]\omega \approx 10.472\,\frac{rad}{s}[/tex], [tex]r = 50\,cm[/tex] and [tex]t = 30\,s[/tex], then the travelled distance of the point is:

[tex]s = \omega \cdot r\cdot t[/tex]

[tex]s = 15708\,cm[/tex]

The point will travel a distance of 15708 centimeters in 30 seconds of rotation.

Assertion: In electrical circuits the connecting wires are usually made of thick copper wires. Reason: Thicker wires offer higher resistance and the wires are made of copper as the electrical conductivity of copper is low

a)Both A and R are true and R is the correct explanation of A.b)Both A and R are true, and R is not the correct explanation of A.c)A is true, but R is false. d)A is false, but R is true. e)Both A and R are false.

Answers

There actually three assertions here: one in A and two more in B.

All three assertions, as well as the reasoning described in this mess, are all False.

The correct choice from the list is e), but that doesn't even describe the complete Falseness of this disaster.


Give the relationship between the number of valence electrons in an atom's
valence electron shell and the position of the element on the Periodic Table​

Answers

Answer:

they're reactions

Explanation:

The relationship between the valence electrons and position is: the number of valence electrons determines the position

What is valence electron?

This is the number of electrons in the outermost shell of an atom.

NOTE: The outermost shell is called valence shell

Position in Periodic table

This is where an element is located in the periodic table

Relationship between valence electrons and position

The position of an element in the periodic table is determined by the number of valence electrons.

For example

Sodium, Na (atomic number of 11) has the following electronic configuration

1st shell = 2 electrons2nd shell = 8 electrons 3rd (valence) shell = 1 electron

Since the valence electron is 1, thus, sodium is located in group 1 of the periodic table.

Thus, we can see that the position of an element in the periodic table is related to the valence electron(s) in the atomic shell of the element.

Learn more about valence electron:

https://brainly.com/question/13993867

#SPJ2

determine the total voltage in the circuit below the ammeter is reading 4 A

Answers

Answer:

6 V.

Explanation:

We'll begin by calculating the equivalent resistance of the circuit. This can be obtained as follow:

Resistor 1 (R₁) = 3 Ω

Resistor 2 (R₂) = 3 Ω

Equivalent Resistance (R) =?

Since the two resistor are in parallel connection, the equivalent resistance can be obtained as:

R = (R₁ × R₂) / (R₁ + R₂)

R = (3 × 3) / (3 + 3)

R = 9/6

R = 1.5 Ω

Finally, we shall determine the total voltage in the circuit. This can be obtained as follow:

Current (I) = 4 A

Equivalent Resistance (R) = 1.5 Ω

Total voltage (V) =?

V = IR

V = 4 × 1.5

V = 6 V

Thus, the total voltage in the circuit is 6 V

Families attempting to rebound from crises are advised to discontinue family rituals and leisure activities, as they may regenerate negative family stress and threaten resilience.

A. False
B. True

Answers

The answer is B. Yes I know it’s correct .

Question 9 of 10
What happens to light as it moves at an angle into a medium that has a higher index of refraction?
A. It slows down, and the angle decreases.
B. It speeds up, and the angle increases.
C. It slows down, and the angle increases.
D. It speeds up, and the angle decreases.

Answers

Answer:

v = C / n     light slows entering a medium of higher index of refraction

ni sin theta i = nr sin theta r    Snell's Law where i refers to incidence and r refers to refraction

sin theta r = (ni / nr) sin theta i

So if the index of refraction is greater than the angle of incidence then the light ray would be refracted towards the normal

Answer:

A. It slows down, and the angle decreases.

Explanation:

got it right, trust

How are newtons third law and his law of universal gravitation are connected

Answers

Answer:

please give me brainlist and follow

Explanation:

Gravitational force keeps it attracted to the Earth, and centripetal force keeps it moving in a circle. ... Explain how Newton's third law and his law of universal gravitation are connected. His third law states that every force has an equal opposite force attracted to it, and that force is caused by gravity.

Why do astronomers use frequencies other than the visible ones when they are
investigating the universe?

Answers

Because not all of the universe can be seen with a visible spectrum

Which of these is an example of tertiary prevention?
A. Getting screened for skin cancer
B. Avoiding smoking and drinking alcohol
C. Dialysis for damaged kidneys
D. Washing hands

Answers

Explanation:

because a tertiary prevention is when the person is already infected with the disease

Because a tertiary prevention is when the person is already infected with the disease


A student pushes a 12 N book to the
right with a force of 10 N. The book
experiences a frictional force of 3 N.

Answers

Answer:

Explanation:

My name is Jeff

An iron wire has a length of 1.50 m and a cross sectional area of 0.450 mm2. If the resistivity of iron is 10.0 ✕ 10−8 Ω · m and a potential difference of 0.800 V is maintained across its length, determine the current in the wire (in A)

Answers

Answer:

2400A

Explanation:

R=pL/A

R-Resistance

p-Resistivity=10.0 x 10^-8

L-1.5m

A-Cross sectional Area=0.00045

R=10.0 x 10^-8 x 1.5 ÷ 0.00045

and=0.000333333

I-current

V-potential difference

I=V/R

0.800÷0.000333333

Ans=2400A

Philosophy: The Big Picture Unit 8

Would an existentialist argue that the study of philosophy was a good use of a life?

A. Yes, if society valued the results of the study.
B. Yes, but only if the individual found it meaningful.
C. No, a life should be spent minimizing the role of anxiety.
D. No, there is no way that philosophy could create a meaningful life.

Answers

the answer to this would be C

What is the mass of a jet that accelerates at 4 m/s2 after a 4,000 N force from the engines?

Answers

Answer:

1000kg

Explanation:

F=MA

Rearrange the formula: M=F/A

plug in values for F (force), and A (acceleration).

M=4000/4

M=1000kg

i think.

not sure tho.

The mass of the jet that accelerates at 4 m/s^2 after a 4000 N force from the engines is 1000 kg.

What is Newton's second law of motion?

Newton's second law of motion states that the acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass. Mathematically, the law can be expressed as F = ma, where F is the net force acting on the object, m is its mass, and a is its acceleration. This law is fundamental to the understanding of the motion of objects under the influence of external forces.

Rearranging the formula to solve for mass, we get:

m = F / a

Substituting the given values, we get:

[tex]m = 4000 N / 4 m/s^2[/tex]

m = 1000 kg

Therefore, the mass of the jet that accelerates at 4 m/s^2 after a 4000 N force from the engines is 1000 kg.

Learn more about Newton's second law of motion, here:

https://brainly.com/question/13447525?referrer=searchRes

#SPJ3

The weight of an object is the force pulling the object:

a. upward
b. to the side.
c. in all directions
d. downward

Answers

D pulling because of gravity

1 kg block slides down a frictionless inclined plane that makes an angle of 300 with respect to the ground. The total length of the plane is 2 m, but midway down it collides with a second block, weighing 0.5 kg. The two blocks stick together and travel as one unit the rest of the way down the ramp. What is the kinetic energy of the combined 1.5 kg block when it reaches the bottom of the plane

Answers

Answer:

the kinetic energy of the combined 1.5 kg block when it reaches the bottom of the plane is 10.62 J

Explanation:

Given that the data in the question;

angle of inclination with respect to the ground [tex]\theta[/tex] = 30°

length of plane d = 2m

m₁ = 1 kg

m₂ = 0.5 kg

now, velocity of the first block at midpoint;

[tex]\frac{1}{2}[/tex]mv² = mgsin[tex]\theta[/tex][tex]\frac{d}{2}[/tex]

[tex]\frac{1}{2}[/tex]v² = gsin[tex]\theta[/tex][tex]\frac{d}{2}[/tex]

v² = gsin[tex]\theta[/tex]d

v = √( gsin[tex]\theta[/tex]d)

g is 9.8 m/s

so we substitute

v = √( 9.8 × sin30° × 2)

v = √( 19.6 )

v =  3.13 m/s

Now, velocity just after collision of the blocks will be;

(m₁ + m₂)v₂ = m₁v

v₂ = m₁v / (m₁ + m₂)

we substitute

v₂ = (1 × 3.13) / (1 + 0.5)

v₂ = 3.13 / 1.5

v₂ = 2.0866 m/s

now, final kinetic energy will be;

[tex]KE_f[/tex] = (m₁ + m₂)gsin[tex]\theta[/tex][tex]\frac{d}{2}[/tex] + Initial Kinetic energy

[tex]KE_f[/tex] = (m₁ + m₂)gsin[tex]\theta[/tex][tex]\frac{d}{2}[/tex] + [tex]\frac{1}{2}[/tex]mv₂²

we substitute

[tex]KE_f[/tex] = [(1 + 0.5)9.8 × sin30 × [tex]\frac{2}{2}[/tex]] + [[tex]\frac{1}{2}[/tex] × 1.5 × 2.0866 ]

[tex]KE_f[/tex] = 7.35 + 3.2654

[tex]KE_f[/tex] = 10.62 J

Therefore, the kinetic energy of the combined 1.5 kg block when it reaches the bottom of the plane is 10.62 J

In the nitrogen cycle, plants take in nitrates and convert them into

Answers

It is then converted into a ammonia.

the ice and steam point on a thermometer are found to be 96ml apart. what temperature is recorded when the length of mercury thread is 33.6ml above the ice point

Answers

Answer:

33.6 / 96   is the fraction of the temperature between ice and freezing

33.6 / 96 = .35

So C = .35 * 100 = 35 deg C  where the ice point would be 0 deg C

You can convert C to F

F = 9 / 5 * C + 32 = 9/5 * 35 + 32 = 95 deg F

Other Questions
Solve for x and y simultaneously in Reflection, refraction, and diffractionall cause lightwaves to A) bend B) change direction C)stand stillD)absorb energy How are sedimentary rocks different from igneous and metamorphic rocks? Lana has a memory box that measures 18 inches wide by 9 inches deep. The height is 1.5 feet what is the volume of the box. IN INCHES!!!!!!! Find the circumference and area of a circle with diameter of 18 inches. Use 3.14 for pi. Write your answer as decimals rounded to the nearest hundredth. a. C = 56.52 in, A = 1017.36 in2 b. C = 56.52 in, A = 254.34 in2 c. C = 113.04 in, A = 254.34 in2 d. C = 113.04 in, A = 1017.36 in2 e. None of the above are correct. Carbon, hydrogen, and oxygen from sugar molecules may combine with other elements to form other biomolecules. The pictureabove shows an example of this. Examine the model and choose ALL of the statements that accurately describe the formation of thenew biomolecule.A)Proteins are being formed.B)The monomers are amino acids.oThis is a hydrolysis reaction.D)Carbohydrates are being broken down.E)This is a dehydration synthesis reaction What text structure would you use if you were writing a paper about the reasons an event took place?A. cause and effectB. comparison-contrastC. chronological orderD. problem-solution true or false? aging is a normal process that lead to normal changes in body structure and function A doll house is created by modeling a family home. Everything in the doll house is created to scale. If the height of a desk in the family home is 36 inches and the height of the model desk is 1.5 inches, what would the height of a bed be if the bed in the family home is 24 inches tall? A cylinder has a radius of 10 m and a height of 8 m.What is the exact volume of the cylinder?A. 187 mB. 807 mC. 160 mD. 800 m When riding your bike on a trail always _________.yield to hikers and horsesride on them even if they are muddy or wet.look for the shortcutstake water Which discipline style allows children a voice in the rules, boundaries and consequences?O PermissiveO AuthoritativeO AuthoritarianO NaturalO Logical I have alot of questions and I need help with a practice quiz quiz consists of 20 multiple choice questions, each with five possible answers, only one of which is correct. If a student guesses on each question, what is the mean and standard deviation of the number of correct answers? mean: 4; standard deviation: 1.78885438 mean: 10; standard deviation: 1.78885438 mean: 4; standard deviation: 2 mean: 10; standard deviation: 3.16227766 Which on is it help plsssssssssssssssssssssss ABCD Helpppppppppppppppp plss 10. Find the surface area of a rectangular prism that has a length of 8 inches, a width of 3 inches, and a height of 6 inches. Which term can substitute for "feet"?O extremities (is correct)O axialO digitsO brachial How many cubic units are in this box?A. 6B. 9C. 11D. 18E.none of these Part 2 Practice the following communication skills. These are serious exercises that may require great effort. a. This week, listen carefully to everyone with whom you engage in conversation. Dont worry about what you plan to say when they are finished, just listen actively and openly while they are talking. b. When they are done, consider what you want to say in return. Validate what other people say before stating your views. Let them know you really listened and heard what they said. c. As you are listening carefully to a person talk, be open to learning something from them. Perhaps you will learn to appreciate why they feel as they do. Perhaps you will learn more about an issue on which you previously were closed-minded. Perhaps you will even change your opinion! d. Write a paragraph every day this week. In your daily paragraph, briefly describe a conversation in which you actually kept your own thoughts quiet while you listened to another person. Describe the conversation and how you validated the other person. Tell what you learned from this conversation. You may have learned something about the other person, about an issue, or about yourself. Send all five paragraphs, each about a separate conversation, to your teacher with your other work for this lesson.