Determine the mass of ammonium chloride, NH4Cl, required to prepare 0. 250 L of a 0. 35 M solution of ammonium chloride

Yes, silver would still be considered an ore even if its demand and usage in digital technology, gold jewelry, and paper money decreased to the point of non-existence. Silver is a naturally occurring metallic element that is found in various ores, and its classification as an ore is based on its physical and chemical properties, regardless of its market demand. Therefore, even if the uses of silver in various industries decline, it would still be classified as an ore.

An ore is a naturally occurring mineral or rock containing valuable substances, typically metals, that can be extracted through mining and processed for various purposes. Even if the demand for silver decreases due to digital technology, gold jewelry, and paper money, it would not change the fact that silver is a naturally occurring material containing a valuable metal. The classification of silver as an ore is independent of its current or potential use in human activities.

Learn more about silver at https://brainly.com/question/29595928

#SPJ11

Yes, two magnets can create magnetic force fields that allows them to interact without touching.

Magnetic forces are non contact forces; they pull or push on objects without touching them. Magnets are only attracted to a few 'magnetic' metals and not all matter. Yes, the investigation did answer the question about whether two magnets create magnetic force fields that allow them to interact without touching.

The investigation provided enough evidence to support the idea that invisible magnetic force fields exist:

The investigation involved observing how two magnets interact with each other without touching. The magnets were brought closer together until they interacted, and then they were moved further apart. This process was repeated several times, and the results were observed and recorded. During the investigation, it was observed that the magnets interacted with each other even when they were not touching. This interaction occurred because the magnets created magnetic force fields that allowed them to interact with each other even when they were not in direct contact. This is because the interaction between the magnets could not be explained by any other means except through the existence of magnetic force fields.

To know more about magnetic force here

https://brainly.com/question/27949286

#SPJ4

The Haber process involves the following steps:

Preparation of reactants; Compression of gases; Mixing of gases; Reaction; Separation of ammonia; Separation of ammonia

The Haber process is a method used to manufacture ammonia (NH3) from nitrogen gas (N2) and hydrogen gas (H2). The process is named after its inventor, German chemist Fritz Haber, who developed the process in the early 20th century.

The Haber process involves the following steps

The Haber process is an important industrial process for the production of ammonia, which is a vital ingredient in the production of fertilizers and many other chemical compounds.

For more question on Haber process click on

https://brainly.com/question/21867752

#SPJ11

To determine if the piston will fail, we need to calculate the volume of the gas at the higher temperature and see if it exceeds the maximum volume of the piston.

First, we need to assume that the gas behaves ideally and follows the gas laws. We can use the ideal gas law, PV=nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.

We know the initial volume of the gas is 0.075 L and the initial temperature is 171°C, which is 444 K (since we need to convert to Kelvin). We don't know the pressure or the number of moles, but we can assume they remain constant.

Next, we need to calculate the final volume of the gas when it is heated to 5934°C, which is 6207 K. We know that the pressure and number of moles remain constant, so we can rearrange the ideal gas law to solve for V:

V = nRT/P

We can plug in the values for n, R, P, and T, and solve for V:

V = (n x R x 6207 K) / P

Now we need to check if this final volume exceeds the maximum volume of the piston, which is 0.885 L. If it does, then the piston will fail.

To convert the final volume from liters to cubic centimeters (cc), we can multiply by 1000:

V = (n x R x 6207 K x 1000) / P

V = (n x 8.31 J/mol K x 6207 K x 1000) / P

V = (n x 51476870 J/mol) / P

Assuming the pressure remains constant, we can set the initial and final volumes equal to each other and solve for n:

n x 8.31 J/mol K x 444 K = n x 51476870 J/mol x 6207 K

n = (8.31 J/mol K x 444 K) / (51476870 J/mol x 6207 K)

n = 2.34 x 10^-7 mol

Now we can plug in the value for n and solve for the final volume:

V = (2.34 x 10^-7 mol x 8.31 J/mol K x 6207 K x 1000) / 1 atm

V = 1.42 cc

Since the final volume of the gas is only 1.42 cc, which is much smaller than the maximum volume of the piston (0.885 L or 885 cc), the piston will not fail.

To know more about combined gas law, click here: brainly.com/question/13538773

#SPJ11

To determine the number of moles of O2 needed to burn 9.45 moles of C2H2, we first need to write down the balanced chemical equation for the combustion of acetylene (C2H2):

2 C2H2 + 5 O2 → 4 CO2 + 2 H2O

From this equation, we can see that 5 moles of O2 are required to burn 2 moles of C2H2. To find out how many moles of O2 are needed for 9.45 moles of C2H2, we can use a simple proportion:

(5 moles O2 / 2 moles C2H2) = (x moles O2 / 9.45 moles C2H2)

To solve for x (moles of O2 needed), simply cross-multiply and divide:

x = (5 moles O2 * 9.45 moles C2H2) / 2 moles C2H2

x ≈ 23.63 moles O2

Therefore, approximately 23.63 moles of O2 are needed to burn 9.45 moles of C2H2.

#SPJ11

When Owen has 28.5 grams of liquid benzene at a temperature of 287.6 K, a total of 3.809 kJ of energy is released during the freezing process.

To find the energy released when benzene freezes, we need to know its heat of fusion and the amount of benzene that freezes. The heat of fusion of benzene is 10.4 kJ/mol.

First, we need to determine how many moles of benzene we have:

Molar mass of benzene (C₆H₆) = 78.11 g/mol

Number of moles of benzene = 28.5 g / 78.11 g/mol = 0.3647 mol

Since the molar ratio of benzene to energy released is 1:1, the energy released when benzene freezes can be calculated as:

Energy released = moles of benzene x heat of fusion

Energy released = 0.3647 mol x 10.4 kJ/mol = 3.809 kJ

Therefore, 3.809 kJ of energy is released when the given amount of liquid benzene freezes.

To know more about the liquid benzene refer here :

https://brainly.com/question/25798187#

#SPJ11

To convert the local atmospheric pressure from mm of Hg to kPa, follow these steps:

1. Calculate the conversion of mm of Hg to atm:
  1 atm = 760 mm of Hg
  392 mm Hg × (1 atm / 760 mm Hg) = 0.5158 atm

2. Convert atmospheres to kilopascals (kPa):
  1 atm = 101.325 kPa
  0.5158 atm × (101.325 kPa / 1 atm) = 52.24 kPa

Following significant digit rules, the pressure in kilopascals is 52.2 kPa.

What is atmospheric pressure?

Atmospheric pressure is the force exerted by the weight of the Earth's atmosphere on a unit of area at a given point on the Earth's surface. The atmosphere is composed of gases, mainly nitrogen (78%) and oxygen (21%), and other trace gases such as argon, carbon dioxide, neon, and helium. These gases are held near the Earth's surface by the force of gravity, and they exert a pressure on the surface below.

Atmospheric pressure is usually measured in units of millibars (mb) or inches of mercury (inHg), and it varies depending on factors such as altitude, temperature, and weather conditions. At sea level, the standard atmospheric pressure is around 1013 mb or 29.92 inHg, but it decreases as you go higher in altitude, because there is less air above you to exert pressure.

Changes in atmospheric pressure can have a significant impact on weather patterns, and can cause changes in temperature, wind patterns, and precipitation. Weather forecasters often use changes in atmospheric pressure as a key indicator in predicting weather patterns.

To know more about Atmospheric pressure:

https://brainly.com/question/28310375

SPJ11

DNA replication is the most energy-intensive process in a cell. Option A is correct.

The replication of DNA requires the unwinding of the double helix structure and the separation of the two strands, which is facilitated by enzymes such as helicases. The replication process also involves the synthesis of new nucleotide strands, which requires the input of energy in the form of ATP (adenosine triphosphate) molecules.

While other cellular processes such as transcription, translation, and lipid catabolism also require energy, DNA replication is particularly energy-intensive due to the large size of the DNA molecule and the complexity of the replication machinery involved.

Additionally, errors in the DNA replication process can lead to mutations that can have serious consequences for the cell and the organism as a whole, so the replication process must be tightly regulated and closely monitored, which also requires energy expenditure.

Hence, A. is the correct option.

To know more about DNA replication here

https://brainly.com/question/21675925

#SPJ4

--The given question is incomplete, the complete question is

"The most energy-intensive process (i.e. requires the most energy) in a cell is A) DNA replication B) carbohydrate synthesis C) transcription D) lipid catabolism. E) translation."--

The change in entropy in the system when 39.3 grams of steam at 1 atm condenses to a liquid at the normal boiling point is 237.4 J/K.

The normal boiling point of a substance is the temperature at which its vapor pressure equals the pressure of the surroundings. In the case of water, the normal boiling point is 100.0 °C at a pressure of 1 atm.

The molar enthalpy of vaporization is the amount of energy required to convert one mole of a liquid into a gas at a constant temperature and pressure. For water, this value is 40.67 kJ/mol.

To determine the change in entropy when 39.3 grams of steam at 1 atm condenses to a liquid at the normal boiling point, we can use the equation ΔS = q/T, where ΔS is the change in entropy, q is the heat transferred, and T is the temperature.

In this case, the heat transferred is equal to the molar enthalpy of vaporization multiplied by the number of moles of water condensed, which is equal to the mass of steam divided by the molar mass of water.

First, we need to convert the mass of steam to moles. The molar mass of water is 18.015 g/mol, so 39.3 g of steam is equal to 39.3/18.015 = 2.183 mol of water.

Next, we can calculate the heat transferred using the molar enthalpy of vaporization:

q = ΔHvap × n = 40.67 kJ/mol × 2.183 mol = 88.76 kJ

Finally, we can calculate the change in entropy:

ΔS = q/T = 88.76 kJ / (373.15 K) = 237.4 J/K

Therefore, the change in entropy in the system when 39.3 grams of steam at 1 atm condenses to a liquid at the normal boiling point is 237.4 J/K.

To know more about entropy, visit:

https://brainly.com/question/13135498#

#SPJ11

An ecosystem is an interconnected set of living and non-living components that interact and influence each other to form a functional unit.

Here all options are correct

As such, it is a complex system of energy and material exchanges between its components. A list of components that make up an ecosystem can include soil, air, sunlight, rocks, rain, and different populations of living organisms. The living components of an ecosystem include plants, animals, and microorganisms, such as worms and jackals. These organisms interact and depend on each other for survival, such as the leopards, giraffes, antelope, and hyenas that rely on the grass and other plants that are watered by the rain.

The sunlight provides energy for photosynthesis, which is essential for the production of food and oxygen. The rocks, soil, and air in the environment provide the physical structure that allows different organisms to interact and thrive. All of these components contribute to the health of an ecosystem, and each component plays an important role in maintaining the balance of the ecosystem.

Know more about ecosystem here

https://brainly.com/question/31459119#

#SPJ11

The atomic mass of aluminum (Al) is approximately 26.98 amu. Therefore, the mass of one Al atom is 26.98 amu.

To calculate the mass of 75 Al atoms, we can multiply the mass of one Al atom by 75:

Mass of 75 Al atoms = 75 atoms x 26.98 amu/atom

Mass of 75 Al atoms = 2024.5 amu

Therefore, the mass of 75 Al atoms is 2024.5 amu.

The partial pressure of SO₂ in equilibrium with the air and solid CaO if PO₂ in the air is 0.21 atm is 1.41 atm.

To determine the partial pressure of SO₂ in equilibrium with the air and solid CaO, we need to use the equation:

CaO(s) + SO₂(g) ⇌ CaSO₃(s)

This equation represents the equilibrium reaction between solid CaO, gaseous SO₂, and solid CaSO₃. At equilibrium, the partial pressures of SO₂ and O₂ in the air will determine the equilibrium constant of the reaction.

Assuming that the pressure of O₂ in the air is 0.21 atm, we can use the ideal gas law to calculate the partial pressure of SO₂:

PV = nRT

where P is the partial pressure of SO₂, V is the volume of the system, n is the number of moles of SO₂, R is the ideal gas constant, and T is the temperature.

At equilibrium, the reaction quotient Qc is equal to the equilibrium constant Kc:

Qc = [CaSO₃]/[CaO][SO₂]

Kc = [CaSO₃]/[CaO][SO₂]

Since CaO is solid, its concentration is constant, so we can write:

Kc = [CaSO₃]/[SO₂]

At equilibrium, Qc = Kc, so we can use this equation to solve for the partial pressure of SO₂:

Kc = [CaSO₃]/[SO₂]

Kc = 0.71 (at 1000 K)

[CaSO₃] = 1 (assuming that the CaO is fully reacted)

[SO₂] = [CaSO₃]/Kc = 1/0.71 = 1.41 atm

Learn more about  partial pressure at https://brainly.com/question/19813237

#SPJ11

One simple experiment that can be conducted to demonstrate that living materials contain water is heating of simple matter.

The following experimental procedure deminstrates the presence of water on living matter.

If the sample contains water, the final weight will be less than the initial weight, indicating that some of the water has been lost due to the heating process.

Learn more about experiments here: https://brainly.com/question/26117248

#SPJ1

The phenomenon being referred to in this question is the greenhouse effect.

This effect occurs as solar radiation is absorbed by Earth's surface and re-radiated into the atmosphere. Some of this energy gets trapped in the atmosphere by greenhouse gases such as carbon dioxide, methane, and water vapor. This trapped energy warms the Earth, leading to global climate change.

To explain further, the Earth has an energy budgeting system where incoming radiation from the sun is balanced by outgoing radiation from the Earth's surface and atmosphere. However, due to human activities such as burning fossil fuels and deforestation, the concentration of greenhouse gases in the atmosphere has increased.

This increase in greenhouse gases has disrupted the balance of the energy budgeting system, leading to an overall warming of the Earth.

Solar circulation also plays a role in the greenhouse effect, as it affects the distribution of heat and energy around the planet. As the Earth's surface warms, air and water move around the globe, distributing heat and energy. This solar circulation helps to regulate the Earth's temperature, but it can also contribute to changes in climate patterns and weather events.

In summary, the greenhouse effect is a phenomenon that occurs as solar radiation is absorbed by the Earth's surface and re-radiated into the atmosphere. This trapped energy warms the Earth, leading to global climate change.

The greenhouse effect is a result of an imbalance in the Earth's energy budgeting system, caused by the increase in greenhouse gases in the atmosphere. Solar circulation also plays a role in regulating the Earth's temperature and climate patterns.

To know more about greenhouse effect, visit:

https://brainly.com/question/13706708#

#SPJ11

Answer:

greenhouse Effect (B , edge 2023)

Explanation:

Answer: Double Replacement

Explanation:

Two elements are being switched around in this reaction, H and K, so it is a double replacement. The K from potassium hydroxide replaces the H in hydrobromic acid, becoming potassium bromide, and the H from hydrobromic acid replaces the K in potassium hydroxide, becoming water.

A 31. 0 mL sample of 0. 624M perchloric acid is titrated with a 0. 258M sodium hydroxide solution. The molarity of H⁺ after the addition of 15.0 mL of NaOH is 0.204 M.

To find the molarity of (H⁺) after the addition of 15.0 mL of NaOH, we first need to calculate the number of moles of NaOH added:

moles of NaOH = Molarity of NaOH x Volume of NaOH

moles of NaOH = 0.258 M x 0.0150 L

moles of NaOH = 0.00387 mol

Since the balanced chemical equation for the reaction between HClO₄ and NaOH is:

HClO₄(aq) + NaOH(aq) → NaClO₄(aq) + H₂O(l)

We can see that one mole of HClO₄ reacts with one mole of NaOH. Therefore, the number of moles of HClO₄ that reacted with the NaOH is also 0.00387 mol.

To calculate the new molarity of H⁺ after the addition of NaOH, we need to use the volume of HClO₄ that remains after the reaction:

Volume of HClO₄ = 31.0 mL - 15.0 mL

Volume of HClO₄ = 16.0 mL = 0.0160 L

Now we can calculate the new molarity of H⁺:

Molarity of H⁺ = moles of HClO₄ / volume of HClO₄

Molarity of H⁺ = 0.00387 mol / 0.0160 L

Molarity of H⁺ = 0.242 M

Therefore, the molarity of (H⁺) after the addition of 15.0 mL of NaOH is 0.242 M.

To know more about the molarity refer here :

https://brainly.com/question/22997914#

#SPJ11

When water boils, the bubbles are composed of water vapor or steam.

The bubbles form when the water is heated to its boiling point and the water molecules gain enough thermal energy to overcome the intermolecular forces holding them together in the liquid state.

As the water molecules escape into the gaseous state, they form bubbles that rise to the surface of the liquid and release the steam into the atmosphere.

The bubbles are filled with water vapor, which is less dense than liquid water and has a higher thermal energy due to the increased molecular motion in the gas phase. Once the bubbles reach the surface, they burst and release the steam into the air.

To know more about water vapor refer to-

https://brainly.com/question/14529481

#SPJ11

186.48 g of [tex]Na_2CS_3[/tex] were generated throughout the reaction.

The balanced chemical equation is:

[tex]3CS_2[/tex] + 6NaOH → [tex]2Na_2CS_3[/tex] + NaOH + [tex]3H_2O[/tex]

The molar mass of [tex]CS_2[/tex] is 76.14 g/mol, and the molar mass of [tex]2Na_2CS_3[/tex] is 192.23 g/mol.

To find the limiting reactant, we need to calculate the number of moles of each reactant. Using the given mass of [tex]CS_2[/tex]:

110.88 g [tex]CS_2[/tex] / 76.14 g/mol = 1.456 mol [tex]CS_2[/tex]

Using the given number of moles of [tex]NaOH[/tex]:

3.12 mol [tex]NaOH[/tex]

We can see that [tex]CS_2[/tex] is the limiting reactant, since it has fewer moles than [tex]NaOH[/tex]. Therefore, we will use the amount of [tex]CS_2[/tex] to calculate the amount of [tex]Na_2CS_3[/tex] produced.

From the balanced equation, we can see that 3 mol of [tex]CS_2[/tex] produces 2 mol of [tex]Na_2CS_3[/tex]. So, 1.456 mol of [tex]CS_2[/tex] will produce:

(2 mol [tex]Na_2CS_3[/tex] / 3 mol [tex]CS_2[/tex]) * 1.456 mol [tex]CS_2[/tex] = 0.971 mol [tex]Na_2CS_3[/tex]

Now, we can use the molar mass of [tex]Na_2CS_3[/tex] to calculate the mass produced:

0.971 mol [tex]Na_2CS_3[/tex] * 192.23 g/mol = 186.48 g [tex]Na_2CS_3[/tex]

Therefore, the mass of [tex]Na_2CS_3[/tex] produced in the reaction is 186.48 g.

For more such questions on reaction , click on:

https://brainly.com/question/11231920

#SPJ11

According to the question the enolate nucleophile and carbonyl electrophiles are attached in the images below.

A nucleophile is a species (atom, molecule, or ion) that donates an electron pair to form a new covalent bond in a reaction. Nucleophiles are attracted to electron-deficient or positively-charged sites, such as the electrophilic sites of organic molecules or cations. In organic chemistry, nucleophiles are typically Lewis bases, such as amines or other electron-rich molecules. In inorganic chemistry, nucleophiles include anions and neutral molecules containing lone pairs of electrons. In chemical reactions, nucleophiles interact with electrophiles, which are positively-charged species.

To learn more about nucleophile

https://brainly.com/question/14052597

#SPJ4

Complete Question:

The new pressure at 273 K, given that the initial pressure was 378 KPa, is 249.9 KPa

The following parameters were obtained from the question:

The new pressure of the gas at 273 K can be obtained as shown below:

P₁ / T₁ = P₂/ T₂

378 / 413 = P₂ / 273

Cross multiply

413 × P₂ = 378 × 273

413 × P₂ = 103194

Divide both sides by 413

P₂ = 103194 / 413

P₂ = 249.9 KPa

Thus, from the above calculation, we can conclude the new pressure at 273 K is 249.9 KPa

Learn more about pressure:

https://brainly.com/question/15343985

#SPJ1

This problem can be solved using Boyle's Law, which posits that the pressure of any given gas will be inversely proportional to its volume when temperature is kept as a constant.

Mathematically Boyle's Law can be expressed as:

P₁V₁ = P₂V₂

where P₁ and V₁ are the initial pressure and volume, respectively, and P₂ and V₂ are the final pressure and volume, respectively.

We are given that:

P₁ = 1.15 atm

V₁ = 640 mL

T = 23.9 °C (which is 297.05 K, using the Kelvin temperature scale)

We need to find V₂ when P₂ = 1.43 atm.

Using Boyle's Law, we can set up the following equation:

P₁V₁ = P₂V₂

(1.15 atm)(640 mL) = (1.43 atm)(V₂)

Solving for V₂:

V₂ = (1.15 atm)(640 mL) / (1.43 atm)

V₂ = 514.69 mL

Therefore, the final volume of the methane gas is 514.69 mL when compressed at constant temperature until its pressure is 1.43 atm.

Learn more about Boyle's Law here:

https://brainly.com/question/30367133

#SPJ1

The final pressure of the gas sample is 1.09 atm when heated to 50ºC.

The final pressure of a gas sample initially at 1.00 atm and 25ºC when heated to 50ºC can be calculated using the ideal gas law:

P₁ × V₁ ÷ T₁ = P₂ × V₂ ÷ T₂

where P₁, V₁, and T₁ are the initial pressure, volume, and temperature of the gas, respectively, and P₂, V₂, and T₂ are the final pressure, volume, and temperature of the gas, respectively.

Assuming that the volume of the gas remains constant, V₁ = V₂, and rearranging the ideal gas law, we get:

P₂ = P₁ (T₂ ÷ T₁)

Substituting the values, we get:

P₂ = (1.00 atm) × (323 K) ÷ (298 K) = 1.09 atm

To learn more about pressure follow the link:

brainly.com/question/23710615

#SPJ4

The mass of I2 reacted is  142.2 g

The mass of PCl3 reacted is 153.4 g

Stoichiometry is a fundamental concept in chemistry and is used in many different areas of science and industry.

We know that;

Number of moles of the F2 produced = 21.1 g/38 g/mol

= 0.56 moles

If 1 mole of I2 produced 1 mole of F2

Then 0.56 moles of I2 reacted

Mass of the I2 reacted = 0.56 mol * 254 g/mol

= 142.2 g

Number of moles of PCl5 = 234.1 g/208 g/mol

= 1.12 moles

If the reaction is 1:1:1

Mass of the PCl3 reacted = 1.12 moles * 137 g/mol

= 153.4 g

Learn more about stoichiometry:https://brainly.com/question/30215297

#SPJ1

Answer:

B. Combustion.

Explanation:

Looking at the given equation, we can see that methane (CH4) reacts with oxygen (O2) and releases water (H2O) and carbon dioxide (CO2). This matches the definition of a combustion reaction. Therefore, the answer is B. Combustion.

The molar mass of HA is approximately 168.48 g/mol.

To calculate the molar mass of HA, we need to use the balanced chemical equation for the reaction between HA and NaOH:

[tex]HA + NaOH[/tex] → [tex]NaA + H2O[/tex]

From the equation, we can see that 1 mole of HA reacts with 1 mole of NaOH to produce 1 mole of NaA. At the equivalence point of the titration,

[tex]moles of NaOH = (0.500 mol/L) * (0.0321 L) = 0.01605 mol[/tex]

Since the initial solution was prepared by dissolving 2.70 g of HA in 100.0 ml of water, we can calculate the initial concentration of HA in units of moles per liter:

[tex]moles\ of HA = (2.70 g / molar\ mass\ of HA) = (0.0270 kg / molar\ mass\ of HA)[/tex]

[tex]initial\ concentration\ of\ HA = moles\ of\ HA / (0.100 L) = moles\ of\ HA / 1000 mL[/tex]

Setting the moles of NaOH equal to the moles of HA, we can solve for the molar mass of HA:

moles of NaOH = moles of HA

[tex]0.01605\ mol = (0.0270 kg / molar\ mass\ of HA) / 0.100 L[/tex]

[tex]molar\ mass\ of\ HA = (0.0270 kg / 0.01605 mol) / 0.100 L = 168.48 g/mol[/tex]

To know more about molar mass, here

brainly.com/question/22997914

#SPJ4

The cell potential for the given reaction at 25°C is -2.3895 V.

First, we need to balance the equation;

Mg(s) + Fe³⁺(aq) → Mg²⁺(aq) + Fe(s)

Next, we can use the Nernst equation to calculate the cell potential (Ecell) at 25°C;

Ecell = E°cell - (RT/nF)ln(Q)

where; E°cell is the standard cell potential

R is the gas constant (8.314 J/mol·K)

T is the temperature in Kelvin (298 K)

n is number of electrons transferred in balanced reaction

F is the Faraday constant (96,485 C/mol)

Q is the reaction quotient

Since the reaction is not balanced in terms of electrons transferred, we need to balance it and determine the number of electrons transferred:

Mg(s) + Fe³⁺(aq) → Mg²⁺(aq) + Fe(s) + 2e⁻

n = 2

The reaction quotient (Q) will be calculated using concentrations of the reactants and products;

Q = [Mg²⁺][Fe(s)] / [Mg(s)][Fe³⁺]

Substituting the given values, we get;

Q = (0.000612 M)(1) / (1)(1.29 M)

Q = 0.000474

Now, we can calculate the cell potential (Ecell) using the Nernst equation;

Ecell = E°cell - (RT/nF)ln(Q)

= (-2.37 V) - (0.0257 V)log10(0.000474)

= -2.37 V - 0.0195 V

= -2.3895 V

Therefore, the cell potential is -2.3895 V.

To know more about cell potential here

https://brainly.com/question/1313684

#SPJ4

A total of 0.1102 moles of Ag will be produced from 3.50 g of Cu.

To determine the number of moles of Ag produced from 3.50 g of Cu, we need to use stoichiometry.

From the balanced chemical equation, we see that 1 mole of Cu reacts with 2 moles of Ag to produce 1 mole of Cu(NO₃)₂ and 2 moles of Ag.

First, we need to convert 3.50 g of Cu to moles by dividing by its molar mass, which is 63.55 g/mol.

3.50 g Cu / 63.55 g/mol = 0.0551 mol Cu

Next, we use the stoichiometry ratio to determine the number of moles of Ag produced:

0.0551 mol Cu x (2 mol Ag / 1 mol Cu) = 0.1102 mol Ag


In summary, we use stoichiometry to determine the number of moles of Ag produced from 3.50 g of Cu by first converting the mass of Cu to moles, and then using the stoichiometry ratio from the balanced chemical equation.

To know more about stoichiometry click on below link:

https://brainly.com/question/30215297#

#SPJ11

An atom becomes negatively charged when it gains electrons. The number of electrons an atom needs to gain to become negatively charged depends on the number of protons in its nucleus, which determines its atomic number and the number of electrons it normally has in its neutral state.

In general, if an atom gains n electrons, it will have a negative charge of -n. For example, if an oxygen atom (atomic number 8) gains two electrons, it will have a negative charge of -2.

Therefore, the least number of electrons an atom must have in order to have a negative charge would be one more than the number of protons in its nucleus, since adding one electron will give it a charge of -1. For example, if the atom has 6 protons, it would need 7 electrons to have a negative charge of -1.

This corresponds to the element carbon, which has atomic number 6 and normally has 6 electrons in its neutral state. Adding one electron to a carbon atom would give it a negative charge of -1.

Answer:

The volume of 9.0 M copper (II) sulfate stock solution needed to prepare 3.0 L of a 5.0 M solution is 1.667 L

Explanation:

Dilution is a process by which the concentration of a solute in solution is reduced by adding more solvent.

In other words, dilution is the procedure followed to prepare a less concentrated solution from a more concentrated one, and it simply consists of adding more solvent.

In a dilution the amount of solute does not vary. What varies in a dilution is the volume of the solvent: as more solvent is added, the concentration of the solute decreases, as the volume (and weight) of the solution increases.

The equation used in this case is:

Ci * Vi = Cf * Vf

where

Ci: initial concentration

Vi: initial volume

Cf: final concentration

Vf: final volume

In this case:

Ci: 9 M

Vi: ?

Cf: 5 M

Vf: 3 L

Answer:

B

Explanation: