The most typical example of deposition would be frost. Frost is the deposition of water vapour from humid air or air containing water vapour on to a solid surface. Solid frost is formed when a surface, for example a leaf, is at a temperature lower than the freezing point of water and the surrounding air is humid.
!!!pleaseee help ASAP ITS TIME!! based on the Lewis/electron dot representation of the two atoms predict the ratio
Answer: B 1:2
Explanation:
i legit searched it up and the answer poped up lol
Answer:
The ratio is 2:1 option C
Hope it helps..........
Melted wax has a temperature of 54 deg. Celsius. Physical or chemical property?
The melting of solid wax to form liquid wax and the evaporation of liquid wax to form wax vapor are physical changes. The burning of the wax vapor is a chemical change.
Please answer 7-9 i am using alot of my points for this
Answer:
7... simalair: made of more than 2 things DIffernt: elemants are made of atoms.
Explanation:
1. Raw egg to boiled egg.
2. Batter to idli.
3. Wet clothes to dry clothes.
4. Woollen yarn to knitted
sweater.
5. Grain to its flour.
6. Cold water to hot water.
7. Straight string to a coiled string.
8. Bud to flower.
9. Milk to Cheese.
10. Cowdung to biogas.
II. Ice cream to melted ice-cream.
12. Stretched rubber band to
its normal size.
13. Souring of milk.
14. Ripening of a mango.
15. Dissolving sugar in water.
these are reversible or Irreversible, chemical or physical, Natural or manmade, periodic or non periodic,desirable or undesirable?
Answer:
1.Irreversible
2.Physical
3.
What is a rule you can use to predict the shape of a molecule based on the number of atoms and line electron pairs (i.e., substituents) around a central atom?
Answer:
VSEPR PRINCIPLE
Explanation:
I did some research and that was what I found, I hope this helps.
NaHCO3 is an example of -
Answer:
sodium bicarbonate
Explanation:
Use the chart to determine which pair of atoms has the greatest difference in electronegativity.
A. Ca – Cl
B. H – Cl
C. Fe – Cl
D. P – Cl
In which medium will a sound wave move more quickly?
Ethanol, air, vacuum, rock.
Answer:
Rock
Explanation:
Why is aluminium not produced by the electrolysis of an aqueous solution of aluminium oxide
Answer:
The extraction is done by electrolysis. The ions in the aluminum oxide must be free to move so that electricity can pass through it. Aluminum oxide has a very high melting point (over 2000°C) so it would be expensive to melt it. Aluminum oxide does not dissolve in water, but it does dissolve in molten cryolite.
Explanation:
4. Write the chemical formulas for the following compounds:
a. lithium oxide (ionic)
b. carbon monoxide (covalent)
C. carbon tetrachloride (covalent)
d. nitrogen trifluoride (covalent)
e. calcium chloride (ionic)
Give me your worst/best pick up line (using these on my crush btw)
did it hurt when you fell from heaven ;)
Is your name wifi? cuz im really feeling a connection
If looks could kill, you'd be a weapon of mass destruction
Do you have a band aid? I scraped my knee falling for you:)
I'm not drunk, just intoxicated by you
are you a criminal? cuz you already stole my heart
i dont have a library card but do you mind if i check you out?
A bond formed between a fluorine, F, atom and a fluorine, F, atom is likely to be____
A
ionic bond
B.
polar covalent
C
nonpolar covalent
D
alloy
Answer:
c) non polar Covalent
Explanation:
this is a molecule formed by atoms of the same element . they both have similar electronegativities and thus cancel out . This makes it a perfect Covalent molecule . The fact that it's a symmetrical molecule makes it non polar. a symmetrical molecule is a molecule formed by the overlap of orbitals of two atoms of the same element ( that is to say , there's no dipole )
Use the reaction given below to solve the problem that follows: Calculate the mass in grams of aluminum metal required to react with 115 g of oxygen
gas
grams Al
4 Al + 3O2 --> 2 Al2O3
**Your answer should be written as XXX
Answer:
4Al + 3O2 --> Al2O3
Step 1; fi
Which is evidence that a chemical reaction has occurred?
es
A)
a phase change occurs
B)
a new gas is observed in the form of bubbles
red and yellow paint mixing to make orange paint
D)
the temperature of the substance remains constant
The correct answer is B) a new gas is observed in the form of bubbles .
Answer:
B. a new gas is observed in the form of bubbles
red and yellow paint mixing to make orange paint.
Write the type of each chemical reaction
1. Double Displacement
2.Double Displacement
3. Single Displacement
4. Decomposition
5. Synthesis
6. Combustion
Directions: Record the number of each atom in each molecule, then record the total number of atoms in the molecule.
Atoms are the individual particles that make up all matter, while molecules are formed when atoms combine together through chemical bonding. There are 6 atoms in NH₄Cl and 5 atoms in CaClO₃.
Atoms are the basic building blocks of matter. They are the smallest units of an element that retain the chemical properties of that element. Atoms consist of a nucleus containing positively charged protons and neutral neutrons, surrounded by negatively charged electrons in energy levels or shells.
Molecules, on the other hand, are formed when two or more atoms chemically bond together. They can be made up of atoms of the same element or different elements. Molecules can exist as discrete units and can have distinct chemical and physical properties. Examples of molecules include water (H2O), carbon dioxide (CO2), and glucose (C6H12O6).
Therefore, there are 6 atoms in NH₄Cl and 5 atoms in CaClO₃ as listed in the table attached.
For more details regarding atoms, visit:
https://brainly.com/question/1566330
#SPJ2
Identify a minimum of six properties that are unique to water.
State how the structure of a water molecule and its bonds relate to each property.
Answer:
1)Boiling Point and Freezing Point.
2)Surface Tension, Heat of Vaporization, and Vapor Pressure.
3)Viscosity and Cohesion.
4)Solid State.
5)Liquid State.
6)Gas State.
Explanation:
Water molecules are polar, so they form hydrogen bonds. This gives water unique properties, such as a relatively high boiling point, high specific heat, cohesion, adhesion and density.
Answer:
Hey I have the same project do you think you can send it to me please :)
Explanation:
One student rubs a balloon against his hair several times. Another student passes a comb through her hair several times. The students place the comb near the balloon and observe that the comb repels the balloon. Which is the most likely reason the comb is able to repel the balloon?
Answer:
They have like charges
Explanation:
Like charges repel, opposite charges attract
The most likely reason the comb is able to repel the balloon is that, the balloon and the comb have the same electrical charge.
The question is incomplete, the complete question is;
One student rubs a balloon against his hair several times. Another student passes a comb through her hair several times. The students place the comb near the balloon and observe that the comb repels the balloon. Which is the most likely reason the comb is able to repel the balloon?
A.The balloon has a positive charge and the comb is neutral.
B. The balloon and the comb have the same electrical charge.
C. The balloon has a negative charge and the comb is neutral.
D. The balloon and the comb have opposite electrical charges
When the student rubs a balloon against his hair several times or another student passes a comb through her hair several times, static charges are built up on the balloon and the comb.
One of the ways by which a neutral object can be charged is by friction. That is, rubbing it against another object repeatedly.
The fact that when the students place the comb near the balloon and observe that the comb repels the balloon means that both the comb and the balloon acquired the same kind of charge after friction.
Therefore, the balloon and the comb have the same electrical charge.
Learn more: https://brainly.com/question/12240595
A gas occupies 4.31 liters at a pressure of 0.755 atm. Determine the volume if the pressure is increased to 1.25 atm. (Boyle)
Answer:
2.60 LExplanation:
The new volume can be found by using the formula for Boyle's law which is
[tex]P_1V_1 = P_2V_2[/tex]
Since we are finding the new volume
[tex]V_2 = \frac{P_1V_1}{P_2} \\[/tex]
From the question we have
[tex]V_2 = \frac{4.31 \times 0.755}{1.25} = \frac{3.25405}{1.25} \\ = 2.60324[/tex]
We have the final answer as
2.60 LHope this helps you
What does unsaturated zone mean?
What is the energy of a wave with a wavelength of 2.25 nm?
The energy of a wave : 8.835.10⁻¹⁷ J
Further explanationThe energy in one photon can be formulated as
E = h. fWhere
h = Planck's constant (6.626.10⁻³⁴ Js)
f = Frequency of electromagnetic waves
f = c / λ
c = speed of light
= 3,10⁸ m/s
λ = wavelength
λ = wavelength of a wave = 2.25 nm = 2.25 x 10⁻⁹m
[tex]\tt E=h.\dfrac{c}{\lambda}\\\\E=6.626.10^{-34}\times \dfrac{3.10^8}{2.25.10^{-9}}\\\\E=8.835\times 10^{-17}~J[/tex]
I must type a short response. Can anyone help me out?
Explanation:
The fluids seperated because of the different density of the liquids. The lower liquid has a high density while the liquid on top has a low density
I need help with my chemistry homework Here are the problems that I am struggling with. I need this to be answered by 11:59 tonight.
1. How many joules are required to melt 338. grams of ice?
2. How many joules are required to convert 418 grams of boiling water into steam?
3. How many joules are required to convert 150. grams of boiling water into steam?
4. How many joules are required to convert 42.0 grams of boiling water into steam?
5. How many joules are required to heat 422 grams of steam from 110.0 0C to 135.0 0C?
Answer:
1. 111.54 kJ
2. 944.68 kJ
3. 339 kJ
4. 94.92 kJ
5. 21.0578 kJ
Explanation:
1. The heat required to melt a given quantity of ice is known as the latent heat of fusion, [tex]L^{\circ}_F[/tex], of ice
[tex]L^{\circ}_F[/tex], of ice = 330 J/g
The heat required to melt a given mass of ice = Mass of ice, m × latent heat of fusion, [tex]L^{\circ}_F[/tex], of ice
The heat required to melt 338 grams of ice = 338 g × 330 J/g = 111,540 J = 111.54 kJ
2. The latent heat of vaporization, l, of water = 2260 J/g
The heat required to convert, m grams of water to steam at
The heat required to convert 418 grams of boiling water into steam = 418 g × 2260 J/g = 944680 J = 944.68 kJ
3. To convert 150 grams of boiling water to steam, we have;
Heat required = 150 g × 2260 J/g = 339,000 J = 339 kJ
4. To convert 42.0 grams of boiling water to steam, we have;
Heat required = 42.0 g × 2260 J/g = 94,920 J = 94.92 kJ
5. The specific heat capacity of steam is 1.996 J/(g·°C)
The heat, Q, required to raise a given mass, m, of steam by Δt °C is given as follows;
Q = m × c × Δt
The heat required to raise the temperature of 422 grams of steam from 110.0 °C to 135.0 °C is therefore;
Q = 422 g × 1.996 J/(g·°C) × (135.0 °C - 110.0 °C) = 21057.8 J
The heat required to raise the temperature of 422 grams of steam from 110.0 °C to 135.0 °C = 21057.8 J = 21.0578 kJ
The mass ratio of hydrogen to oxygen in water (formula H20) is 0.126 g hydrogen for every 1 g of oxygen. In another compound of hydrogen and oxygen called hydrogen peroxide, the mass ratio of hydrogen to oxygen is 0.063 g hydrogen for every 1 g of oxygen. What is a possible formula of hydrogen peroxide?
Answer: H2O2
Explanation:
What is the scientific name for an orca or killer whale?
FIRST ONE WILL BE MARKED “BRAINIEST”
Explanation:
Orcinus orca is the name of orca
In an endothermic reaction, the temperature of products is __________ the temperature of reactants
A. Greater than
B. Equal to
C. Less than
balance this chemical equation pleaseee
What happens to temperature when the frequency is increased and when the frequency is decreased
Answer:
As the frequency increases, the wavelength decreases. ... (a) For a given sound, as the temperature increases, what happens to the frequency? There is no change in frequency. The speed of sound increases by about 0.5 m/s for each degree Celsius when the air temperature rises.
What is a limiting reagent? A.) The reactant that is used up first in a reaction B.) The reactant that is used the least reactive in a reaction C.) the reactant with the smallest coefficient in the equation D.) the reactant with the largest coefficient in the equation
Answer: A.) The reactant that is used up first in a reaction
The reactant that is totally consumed during a reaction, or the limiting reagent, decides when the process comes to an end. A limiting reagent is the reactant that is used up first in a reaction. Therefore, option A is correct.
What is a limiting reagent?A reactant that is completely consumed at the end of a chemical reaction is known as the limiting reagent. Since the reaction cannot proceed without this reagent, the amount of product that can be produced is constrained.
The limiting reactant is the one that is consumed first and sets a limit on the quantity of product(s) that can be produced. Calculate how many moles of each reactant are present and contrast this ratio with the mole ratio of the reactants in the balanced chemical equation to get the limiting reactant.
The terms limiting reagent and limiting agent may also be used to describe the limiting reactant.
Thus, option A is correct.
To learn more about limiting reagent, follow the link;
https://brainly.com/question/11848702
#SPJ2
The terms distance and displacement are used by scientists to describe very specific differences between an object's initial position and its final position. Describe a situation in which the distance traveled is great but the displacement is zero.
Explanation:
Distance is the total length of path one travels.
Displacement is the distance between the initial and final position.
For example, if your classroom is located 200m from your dormitory, you walk to class and back to your dormitory, your distance is 200m + 200m = 400m;
Your displacement is 0m. Your initial and final position is the same so no displacement.
