D...
W...
m...
A student runs two experiments with a constant-volume "bomb" calorimeter
containing 1400. g of water (see sketch at right).
sam....
First, a 5.000 g tablet of benzoic acid (C6H5CO₂H) is put into the "bomb" and
burned completely in an excess of oxygen. (Benzoic acid is known to have a heat of
combustion of 26.454 kJ/g.) The temperature of the water is observed to rise from
13.00 °C to 32.28 °C over a time of 10.7 minutes.
ry Sy...
an Am...
Next, 4.900 g of ethane (C₂H6) are put into the "bomb" and similarly completely
burned in an excess of oxygen. This time the temperature of the water rises from
13.00 °C to 44.56 °C.
Use this information, and any other information you need from the ALEKS Data
resource, to answer the questions below about this reaction:
-
stirrer
Is this reaction exothermic, endothermic, or neither?
ก
thermometer
chemical reaction
"bomb"
A "bomb" calorimeter.
If you said the reaction was exothermic or endothermic, calculate the amount of heat that was
released or absorbed by the reaction in the second experiment.
2C₂H,(g) + 70₂(g) 4CO₂(g) + 6H₂O(g)
Be sure any of your answers that are calculated from measured data are rounded to the correct number of significant digits.
Note for advanced students: it's possible the student did not do these experiments sufficiently carefully, and the values you
calculate may not exactly match published values for this reaction.
exothermic
Oendothermic
neither
water
kJ
insulation El
olo
A
0
2 C
국이
러가지
분위:
N=
ble 8.5
od Sou
tem
read, Cer
irape-Nut
loney Bun
atmeal Sq
basted Mul
ruits and Ve
Leaweed, spis
pinach, boile
feat, Poultry,
eef, plate steas
hicken, giblet
amb, liver, par

Answer:

OOO

Explanation:

OOOOOO

Answer:

Molecular compounds are inorganic compounds that take the form of discrete molecules. Examples include such familiar substances as water (H2O) and carbon dioxide (CO2). These compounds are very different from ionic compounds like sodium chloride (NaCl).

Silver from the anode gets dissolved to reach the cathode, where the spoon will be plated.

Electroplating is a way of electrolysis, where a thin layer of metal is used to plate a determined object. It is a kinda process to purify a material you want.

The anode contains the metal you want to plate with, in this case, the Ag.

The anode contains the half-reaction of oxidation so:

Ag(s) → Ag ⁺ (aq)  +  e⁻

In the cathode, you have the spoon, which it takes place the half-reaction of reduction:

Ag ⁺ (aq)  +  e⁻  →  Ag(s)

The electrolytic cell, where the redox reaction takes place, must be filled with a AgNO₃ solution.

Silver from the anode gets dissolved to reach the cathode, where the spoon will be plated.

Learn more about the electroplating here:

https://brainly.com/question/20112817

#SPJ1

0.3 L is the final volume when M₁ = 3 M, V₁ = 0.125L, M₂ = 1.25M.

The amount of space occupied by a three-dimensional figure as measured in cubic units.

Given data:

M₁ = 3 M

V₁ = 0.125L

M₂ = 1.25M

V₂ = ?

Solution:

M₁V₁ = M₂V₂

3 M × 0.125L = 1.25M × V₂

V₂ = 0.3 L

Hence, 0.3 L is the final volume.

Learn more about volume here:

https://brainly.com/question/15576659

#SPJ1

They are forms of water in its liquid state at ground level. Thus, the correct option is A.

Precipitation, or water in the atmosphere, forms hail. When water drops freeze together in the chilly higher parts of thunderstorm clouds, hail is the result.

When a water droplet is lifted by an updraft from a thunderstorm over the freezing point of the atmosphere, hail is created. The super-cooled water or water vapor that the frozen water droplet accretes later freezes when it comes into touch with it. A hailstone grows as a result of this process.

When water vapor from the atmosphere condenses into liquid water droplets, they become heavy enough to fall as a result of gravity.

For more information regarding hailstrom, visit:

https://brainly.com/question/26551945

#SPJ1

Answer:A

Explanation:

.

Answer:

175K

Explanation:

(-145°F − 32) × 5/9 + 273.15 = 174.817K

174.817 ---> 175 (Rounded to whole number/ ones place)

Answer:

true is correct

Polyester and Nylon are examples of synthetic materials called polymers. This statement is True.

Polymers are large molecules composed of repeating subunits called monomers, which are chemically bonded together. In the case of polyester, it is made from a polymer called polyethylene terephthalate (PET), while Nylon is made from polyamide monomers. These polymers are created through polymerization processes that combine smaller molecules to form long chains.

Synthetic polymers like polyester and nylon are widely used in various applications due to their desirable properties, such as strength, durability, and resistance to chemicals and moisture.

Learn more about Polymers, here:

https://brainly.com/question/8930717

#SPJ3

Answer:

A device in which oil can be trapped, or which makes use of oil to trap something else I think

M₁V₁=M₂V₂

65 x M₁ = 16.8 x 0.5

M₁ = 0.129

65 x M₁ = 18.2 x 0.5

M₁ = 0.14

65 x M₁ = 17.35 x 0.5

M₁ = 0.133

Average = 0.129 + 0.14 + 0.133 = 0.134 M

The entropy of a mixture is 96.44J K-1 mol -1

The formula for calculating the entropy of a mixture-

Δ[tex]S_{mix} =[/tex][tex]-nR(X_{O2} ln_{XO2} +X_{N2} lnX_{N2})[/tex]

X=mole fraction

total no. of moles(t)=m + n

                             =2.4+9.2

                             =11.6 moles

now substituting the values-

entropy of mix=-11.6R(2.4/11.6 + 9.2/11.6)

                       =11.6R

( R=8.314 )        =11.6×8.314

                          =96.44J K-1 mol -1

hence, The entropy of a mixture is 96.44J K-1 mol -1

learn more about entropy here:

https://brainly.com/question/2748166

#SPJ10

The Arrhenius definition of an acid states that an acid ionizes or dissociates to from hydroxide ions in solution.

The definition of solutions was more given by the traditional scientist in smart solutions, which are natural solutions, like substances that - easy solutions, aqueous like bases.

In this case, Arrhenius definition of an acid states that an acid ionizes or dissociates to from hydroxide ions in solution.

See more about Arrhenius definition  at brainly.com/question/13184258

#SPJ1

What is one advantage of wind and hydroelectric power?

A. They are effective in any type of environment.

B. Neither harms wildlife.

C. Neither produces pollutants.

D. Both are inexpensive.

Explanation:

one of the qnswer is flood control, irrigation support, and clean drinking water

The Munich Procedural Model is a simple design model that uses the concepts define, optimize, and develop solutions iteratively and in any order. C

The Munich procedural model is a design that illustrates several opportunities regarding the order in which design process and stages beyond mere iteration should take.

A procedural model commonly used for development is the V-model.

Hence, the Munich Procedural Model is a simple design model that uses the concepts define, optimize, and develop solutions iteratively and in any order.

Learn more about procedural designs here:

https://brainly.com/question/22654163

#SPJ1

P₄ + 10Cl₂ → 4PCl₅

mol P₄ = 455 : 123.895 g/mol = 3.672

mol Cl₂ = 10  x 3.672 = 36.72

mass Cl₂ = 36.72 x 71 g/mol = 2607.12 g

The sulfuric acid can be constituted into different concentrations using distilled water as a diluent.

Dilution of acid is defined as the decrease in the concentration of an acid using water.

For sulfuric acid to be diluted, it is slowly added to distilled water using the following guidelines:

Learn more about acid here:

https://brainly.com/question/25148363

#SPJ1

Answer: A

Explanation:

Oxidation is the process through which electrons are gained. This indicates that only organisms on the electron side have the potential to be oxidizing agents. c, d, and e are, by definition, eliminated.

We also know that H+ is in the +1 oxidation state. The same is true for 'H' in H2O... it doesn't change oxidation states

Therefore, the answer must be a) nitrate

The limiting reactant between the reaction of 6 moles of oxygen and 12 moles of mercury is mercury (Hg)

4Hg + O₂ —> 2Hg₂O

From the balanced equation above,

4 moles of Hg reacted with 1 mole of O₂

From the balanced equation above,

4 moles of Hg reacted with 1 mole of O₂

Therefore,

12 moles of Hg will react with = 12 / 4 = 3 moles of O₂

From the above calculation, we can see that only 3 moles of O₂ out of 6 moles given is required to react completely with 12 moles of Hg.

Thus, Hg is the limiting reactant and O₂ is the excess reactant .

Learn more about stoichiometry:

https://brainly.com/question/14735801

#SPJ1

The correct sequence is higher temperature→ more kinetic energy→ more space between particles→ higher volume.

According to the postulates of Kinetic gas theory:

Postulate 1: It states that the average kinetic energy of gas particles is proportional to the absolute temperature of the gas.

Which states that the higher temperature, the higher the kinetic energy of the molecules, which is the start of the sequence of the relationship between temperature and volume.

Postulate 2: Average kinetic energy is proportional to the square of the speed, it shows that at higher the kinetic energy the faster the molecules will move.

Postulate 3: As the particles move faster, the particles will collide more frequently so they will move away from each other, occupying more space.

Postulate 4: More space between the molecules results in more volume.

So, the complete and correct sequence is higher temperature → higher kinetic energy (higher speed) → more space → more volume.

Learn more about the Kinetic Gas Theory here:

https://brainly.com/question/7563496

#SPJ10

The electronic configuration of Lv element is [tex]5f^{14} 6d^{10} 7s^2 7p^4[/tex].

The electronic configuration of [tex]Lv^{+4}[/tex] is [tex]5f^{14} 6d^{10} 7s^2[/tex] .

Electronic configuration, also called electronic structure, is the arrangement of electrons in energy levels around an atomic nucleus.

And also the possible union with hydrogen can give two possible compounds:

[tex]LvH_2 \;or LvH_4[/tex]

This is because the Livermorio compound can have two different oxidation states with the values 2 and 4. When reacting with the hydrogen that its charge is +1, these would be the two possible equations of a client to the different oxidation states with the ones that might react Lv.

It is a synthetic chemical compound and its number in the periodic table is 116.

Learn more about electronic configuration here:

https://brainly.com/question/13497372

#SPJ1

#1

Atomic no=116

Lies ahead of Renedium -86

Electronic configuration

#2

Lv^4+ means 4 electrons donated

So it gets removed from p orbital

[Rn]5f¹⁴6d¹⁰7s²

The compound above is a cyclic (ring) compound.

Organic compounds are compounds which contains carbon and hydrogen.

Some classes of organic compounds include the following:

So therefore, the compound above is a cyclic (ring) compound.

Learn more about organic compounds:

https://brainly.com/question/704297

#SPJ1

Answer:

B) As you move across the row, the number of electrons increases and reactivity also increases.

Explanation:

The periodic table is arranged in a way that if you go across a period, the number of protons, neutrons, and electrons in an element increases. In terms of reactivity, the most reactive elements are the ones which have a high electronegativity. The electronegativity of the elements increases as you travel to the right and upwards on the periodic table.

Answer:

The new weight-loss supplement was less effective on females in the study. That is because only 65% of them lost weight after two weeks, whereas 74% of the males lost weight after two weeks.

Explanation:

37 out of 50 males lost weight after two weeks, so 74% of males lost weight ( (37 · 2)/(50 · 2) ). 13 out of 20 females lost weight after two weeks, so 65% of females lost weight ( (13 · 5)/(20 · 5) ). This means the supplement was less effective on females because males had a higher percentage of losing weight.

Hope this helps !! :D

Answer: I think 82.46

Explanation: The atomic number for strontium, or Sr on the periodic table, is 38. With knowing the atomic number, I multiplied that by the number of moles given.

38 × 2.17 = 82.46

I hope this helps!!

The number of atoms present in 2.17 moles of strontium are  [tex]1.306774 \times 10^{24}[/tex].

An atom is the smallest indivisible unit of a chemical element that retains the chemical properties of that element. It is the basic building block of matter.

To determine the number of atoms in a given number of moles, we can use Avogadro's number, which is approximately [tex]6.022 \times 10 ^{24}[/tex] atoms per mole.

In this case, we have 2.17 moles of strontium. To find the number of atoms, we multiply the number of moles by Avogadro's number:

Number of atoms = [tex]2.17 moles\times6.022\times 10^{23}[/tex][tex]atoms/mole[/tex]

On calculating this expression:

Number of atoms =[tex]1.306774 \times 10^{24}[/tex]

Therefore, there are approximately [tex]1.306774 \times 10^{24}[/tex] atoms in 2.17 moles of strontium.

Learn more about atom here:

https://brainly.com/question/1566330

#SPJ2

Talk to the doctor if you see something in the corner of your eye.

Visual hallucinations involve seeing things that aren't there.

It's called a visual hallucination, and it can seem like your mind is playing tricks on you. Beyond being scary or stressful, it's also usually a sign that something else is going on.

So if it's happening to you, talk to your doctor. That's the first step toward getting better.

Learn more about visual hallucinations here:

https://brainly.com/question/23288916

#SPJ1

Answer:

.147 moles

Explanation:

PV = n RT        choose the correct "R"   to be 62.364  L torr /(K-mol)

   T  needs to be in K  (so add 273.15)

1351 torr  * 2 L  = n  * 62.364 * (21 + 273.15 )

solve for n = .147 moles

Answer:

An isomer is a molecule with the same molecular formula as another molecule, but with a different structure. Isomers contain the same number of atoms of each element, but have different arrangements of their atoms. Isomers do not necessarily share similar properties, unless they also have the same functional groups.

A chemical equation is the symbolic representation of a chemical reaction in the form of symbols and formulae, wherein the reactant entities are given on the left-hand side and the product entities on the right-hand side with a plus sign between the entities in both the reactants and the products and an arrow that points towards the products, and shows the direction of the reaction. The coefficients next to the symbols and formulae of entities are the absolute values of the stoichiometric numbers. The first chemical equation was diagrammed by Jeen Beguin in 1615.

A chemical formula is a way of presenting information about the chemical proportions of atoms that constitute a particular chemical compound or molecule, using chemical element symbols, numbers, and sometimes also other symbols, such as parentheses, dashes, brackets, commas and plus and minus signs.

Hope this helps you!

Answer:

Explanation:

The New Deal program was to help the American economy recover from the Great Depression.

Franklin Delano Roosevelt was an American politician and attorney who served as the 32nd president of the United States from 1933 until his death in 1945.

Roosevelt promised the American people a "New Deal" if he was elected president in 1932. The goal of this New Deal program was to help the American economy to recover from the Great Depression.

Roosevelt's deal was based on providing economic relief to citizens, reforming institutions that failed during the early 1930's, and helping the overall economy to recover. This popular program lead FDR to be elected president 4 times.

Learn more about Franklin Roosevelt here:

https://brainly.com/question/8333337

#SPJ1

Answer:

4.2  g  

Explanation:

The VOLUME of the ring is   4.2 - 4.0 = .2 ml  = .2 cm^3

the MASS of the ring is this times the density

.2 cm^3  *  21 g/cm^3 = 4.2 g

Answer:

the answer is c

Explanation:

density is mass/volume

so mass=density × volume

but we take the change is volume that is v2-v2=4.2-4=0.2ml

but the density is in gm/cm^3 so we should convert ml into cm^3. eventually they are equal so mass=21×0.2=4.2