Consider three identical light bulbs connected as shown in the circuit below.

a. Which light bulb(s) will be brightest? Explain.
b. What will happen to B and C if light bulb A is removed? Explain.
c. What will happen to A and B if light bulb C is removed? Explain.

we know that,

Frequency = 1/ time period

hence, Feq = 1/5 ===> 0.2 Hz

hence, wave velocity = freq * wavelength

hence,

V = 0.2 * 100

==> Wave velocity = 20 m/s

Answer:oxidation number

Explanation:

i just took quiz;)

The ratio of the elements in a binary ionic compound are based on the element's oxidation number.

Oxidation number can be generally described as the number which is allocated to the chemical elements in a chemical combination of different compounds. The oxidation number of an element is basically the number or count of electrons that atoms in a molecule can share, lose or gain while they are forming chemical bonds with the other atoms of a different element or atom.

The oxidation state, or oxidation number is the hypothetical charge which is present on an atom if all of the bonds in an atom to different atoms were fully ionic in nature. Oxidation state describes the degree of oxidation of an atom in a chemical compound or molecule. The oxidation state may be positive, negative or zero depending upon the loss or gain of electrons.

Learn more about Oxidation number here:

https://brainly.com/question/29263066

#SPJ2

Answer:

Explanation:

Given that:

[tex]mass \ m_ 1 = 11.0 \ kg[/tex]

[tex]mass \ m_2 = 19.0 \ kg[/tex]

[tex]mass \ of \ the \ pulley\ M = 7.90 \ kg[/tex]

[tex]Radius \ of \ the \ pulley = 0.200\ m[/tex]

1) Provided that the mass in [tex]m_2[/tex] is greater than the mass we have in [tex]m_1[/tex], then likewise the tension we have in [tex]T_2[/tex] will be greater than the tension in [tex]T_1[/tex]

Using Newton's second law to mass [tex]m_1[/tex], we have:

[tex]m_2g - T_2 = m_2 a \\ \\ T_1 = m_1 g +m_1 a \\ \\ T_1= m_1 (g+a) --- (1)[/tex]

By using the second law, we have:

[tex]m_2g - T_2 = m_2a \\ \\ T_2 = m_2 (g-a)---(2)[/tex]

For the pulley, let's use the torque equation, so we have:

[tex]T_2 r -T_1 r = I \alpha \\ \\ T_2r -T_1r = \Big ( \dfrac{Mr^2}{2}\Big) \dfrac{a}{r} \\ \\ T_2 -T_1 = \dfrac{Ma}{2} ---- (3)[/tex]

Altogether, from equation (1)(2) and (3), we have:

[tex]m_2(g-a) -m_1 (g+a) = \dfrac{Ma}{2} \\ \\ m_2g -m_2a -m_1g-m_1a = \dfrac{Ma}{2} \\ \\ a = \dfrac{(m_2 -m_1) g}{(m_1 + m_2 + \dfrac{M}{2})} \\ \\ a = \dfrac{(19.0 \ kg - 11.0 \ kg ) ( 9.8 \ m/s^2)}{(19.0 \ kg + 11.0 \ kg + \dfrac{7.90 \ kg }{2} )}[/tex]

[tex]a = 2.31 \ m/s^2[/tex]

Also; from equation (1), the tension in the string is:

[tex]T_1[/tex] = (11.0 kg ) ( 9.8 + 2.31) m/s²

[tex]T_1[/tex] = 133.21 N

[tex]T_1[/tex] ≅ 133 N

From equation (2):

[tex]T_1[/tex] = m_2(g-a)

[tex]T_1[/tex] = (19.0 kg) ( 9.8 - 2.31) m/s²

[tex]T_1[/tex] = 142.31 N

[tex]T_1[/tex]  = 142 N

Answer:

the correct answer is A

Explanation:

This is a doppler effect exercise which is the change in frequency due to the relative movement of the sound source and the observer.

          [tex]f' = f_o \ \frac{v+v_o}{v-v_s}[/tex]

where v₀ is the speed of the observer and v_s the speed of the source, the signs correspond when the two are closing in

with this expression let's analyze the different answers

A) True. The observed change is in the frequency, in this case the two are moving away, so the expression that describes the phenomenon is

        [tex]f'= f_o \ \frac {v-v_o}{ v+v_s}[/tex]

In this case, the speed of the source is greater than the speed of the observer, so when the denominator increases faster than the numerator, consequently the frequency must decrease

B) False. The amplitude does not depend on the relative velocity

C) False. The intensity depends on the distance, by or which when increasing the distance the intensity should decrease

D) False. The speed of sound is a constant, if the frequency decreases the wavelength must increase to maintain equality

E) False. The speed of sound depends on the properties of the propagating medium, not on the relative speed of the source and the observer.

Consequently the correct answer is A

Oh god someone sent something really bad, I only saw it for a few seconds. Honestly you should re post this question, jeez...

Answer:

D. Friction is the type of force

Answer:  The younger elliptical and lenticular galaxies had results similar to spiral galaxies like the Milky Way. The researchers found that the older galaxies have a larger fraction of low-mass stars than their younger counterparts.

Explanation:

Answer:

The base of taller buildings are made broader because it reduces the pressure exerted on the ground so that they do not sink in due to the extremely high pressure of the building.

Explanation:

hope thiss helpss~!

A broad base is used to engage or recruit a diverse range of individuals to broad-based environmentalism.

Find out more about the broader base here:

brainly.com/question/14313691

The unit called horsepower is defined based on the amount of work a horse can do in 1 minute.

James Watt used the horsepower unit for the first time in 1782. According to the account, James Watt used a pony to charge coal from the mines. According to the narrative, he needed a unit to measure the force of one of these animals.

He discovers that they can move 22.000 lbs per minute and decides to (arbitrarily) boost this metric by 50%. Having been the unit 33.000 lb/ft per minute, horsepower is an engine's output horsepower rating, whereas brake horsepower is an engine's input brake horsepower.

Brake horsepower measures an engine's power without accounting for power losses, whereas HP accounts for power losses. Horsepower of the brakes

Therefore, the horsepower unit is defined by the amount of work a horse can do in one minute.

To learn more about horsepower, refer to the link:

https://brainly.com/question/8652948

#SPJ2

Answer:

d) Similar and joined in series

Explanation:

In a series combination of resistors, the current throughout the circuit remains the same, while the total voltage across the circuit is the sum of the voltage across each resistor connected in the circuit.

[tex]V_{Total} = V_{1}+V_{2}+V_{3}+...+V_{N}[/tex]

Now, if we consider that all the resistors are similar having rgw same value of resistance. So for the same value of resistance and current, the voltage drop across each resistor will also be the same.

[tex]V_{Total} = V+V+V+...+V(upto\ N\ resistors)\\V_{Total} = NV_{Resistor}\\V_{Resistor=}\frac{V_{Total}}{N}[/tex]

Hence, the correct option is:

d) Similar and joined in series

Answer:

Value of Q when W = 288 is 192

Explanation:

Given that;

q varies as w [Using ratio property]

Given that value of q = 24

And value of w = 36

Find:

Value of Q when W = 288

Computation:

If Q varies as W

So their ratio must be same

So, using ratio property for find factor

q / w = Q / W

24 / 36 = Q / 288

Q = [24 x 288] / 36

Q = 6,912 / 36

Value of Q when W = 288 is 192

Answer:

Its more likely to be wave D.

Explanation:

Light waves for violet are closer together than all other colors.

Answer:

12 J

Explanation:

From the question given above, the following data were obtained:

Mass (m) = 7.6 kg

Distance (d) = 6 m

Velocity (v) = 5 m/s

Force (F) = 2 N

Workdone (Wd) =.?

Workdone can be defined as the product of force and distance moved in the direction of the force. Mathematically, it is expressed as:

Workdone = Force × distance

Wd = F × d

With the above formula, we can obtain the workdone as follow:

Distance (d) = 6 m

Force (F) = 2 N

Workdone (Wd) =.?

Wd = F × d

Wd = 2 × 6

Wd = 12 J

Thus, the workdone is 12 J

Answer: Computed tomography (CT) is an imaging tool that combines x-rays with computer technology to produce a more detailed, cross-sectional image of your body. A CT scan lets your doctor see the size, shape, and position of structures that are deep inside your body, such as organs, tissues, or tumors.

So, the answer must be a CT scan. I may be wrong.

Answer:

B. CT SCAN

Explanation:

Edge 2021

Answer:

The initial speed of the bullet will be:

[tex]v_{ib}=331.36\: m/s[/tex]

Explanation:

Using the momentum conservation:

[tex]p_{i}=p_{f}[/tex]

[tex]m_{b}v_{ib}=Mv[/tex] (1)

Where:

Using the conservation of energy:

[tex]\frac{1}{2}Mv^{2}=\frac{1}{2}Mv_{2}^{2}+Mgh [/tex] (2)

Where v(2) is the speed of the system at 0.8 m of vertical height.

Using the forces acting on the system we can find v(2).

The forces can be equal to the centripetal force:

[tex]T-Mg*sin(\alpha)=M\frac{v_{2}^{2}}{L}[/tex]            

α is the angle of T with respect to the horizontal, here α = 25.4°  

So, v(2) will be:

[tex]T-Mg*sin(\alpha)=M\frac{v_{2}^{2}}{L}[/tex]  

[tex]\frac{L}{M}(T-Mg*sin(\alpha))=v_{2}^{2}[/tex]  

[tex]\frac{1.4}{0.76}(5-0.76*9.81*sin(25.4))=v_{2}^{2}[/tex]  

[tex]v_{2}=1.82 \: m/s[/tex]

Using this value on equation (2) we will find v.

[tex]v^{2}=v_{2}^{2}+2gh [/tex]

[tex]v^{2}=1.82^{2}+2(9.81)(0.8) [/tex]

[tex]v=4.36\: m/s [/tex]

And finally using equation (1) we can find the initial speed of the bullet.

[tex]m_{b}v_{ib}=Mv[/tex]

[tex]0.01*v_{ib}=0.76*4.36[/tex]

[tex]v_{ib}=331.36\: m/s[/tex]

I hope it helps you!

Answer:

≈ 473 J

Explanation:

m ( mass ) = 2.5 kg

T ( tension ) = 12 N

v = constant

h ( height ) = 6.31 m

d ( diameter ) = 52.3 m

Determine how much thermal energy is created

considering that external force acts on the system

ΔE = W    and this can be rewritten as

mgh + ΔEth = W --------- ( 1 )

where ΔEth  = amount of thermal energy created

also ; W = Fd cos ∅,  hence Work done by Tension force (w) = Td cos 0 = Td

back to equation ( 1 )

mgh + ΔEth = Td

ΔEth  = Td - mgh

         = ( 12 * 52.3 ) - ( 2.5 * 9.8 * 6.31 )

         ≈ 473 J

Answer:

Friction

Explanation:

Explanation:

Distance and amount of charge are factors that determine which of the

following quantities?

D. All of the above

Answer:

Explanation:

As the 1-meter string is at a 10° angle, the radius of horizontal circle Barbie is whirled will be = 1*cos(10°) meter.

Once the rotation speed is given, then multiple that by cos(10°) will be the tangential speed.

Answer:

Explanation:

cant calculate as no speed is given but the tangential speed is

= rotation speed x radius x cos 10.°

= rotation speed x cos  10.°

Answer:

manage your weight better, have stronger bones, have lower blood pressure, less risk of a heart attack, etc.

Answer:

You become healthier, your body starts regulating better, you get stronger bones and muscles, and you lower the risk of diabetes,heart problems and other diseases.

Answer:

Our appliance and electronic energy use calculator allows you to estimate your ... using the formulas provided below; Installing a whole house energy monitoring system. ... energy consumption a few watt-hours, and you can use a monitor to estimate those too. ... Estimate the number of hours per day an appliance runs.

Explanation: