Answer:
1
Explanation:
single displacement replaces one element with another and it's product is a pure element.
What volume of solution is required to produce a 7.8M solution containing 23.6g of LiBr?
Answer:
34.9 mL
Explanation:
First we convert 23.6 g of LiBr into moles, using its molar mass (86.845 g/mol):
23.6 g ÷ 86.845 g/mol = 0.272 mol LiBrNow we can calculate the required volume, using the definition of molarity:
Molarity = moles / litersliters = moles / Molarity0.272 mol / 7.8 M = 0.0349 LWe can convert L into mL:
0.0348 L * 1000 = 34.9 mLwhat is modal class?
தமிழ் வாழ்க
Answer:
Modal means the one that occurs most often (averages: mode). In maths, the mode is one of the most common ways to describe a set of data. ... The modal class is, therefore, the group with the highest frequency.
Answer:
Modal means the one that occurs most often (averages: mode). In maths, the mode is one of the most common ways to describe a set of data. ... The modal class is, therefore, the group with the highest frequency. For example: if you counted the number of pencils in different pencil cases and you decided to group them.
Explanation:
தமிழன் ❤
if the original volume of a gas was 300 ml at 0.250 atm and 400.0 k what is the volume of the gas at 2.00 atm
Answer:
the answer is 18.75
What is happening when an oxygen molecule is formed from two separate oxygen atoms?
Answer:
They form a double bond
Explanation:
Define stoichiometry
Stoichiometry is the field of chemistry that is concerned with the relative quantities of reactants and products in chemical reactions. For example, when oxygen and hydrogen react to produce water, one mole of oxygen reacts with two moles of hydrogen to produce two moles of water
Answer:
the relationship between the relative quantities of substances taking part in a reaction or forming a compound, typically a ratio of whole integers.
Explanation:
Dont put so much points pal,
describe what happens when atoms release light?
Answer:
hi
Explanation:
Light is the result of electrons moving between defined energy levels in an atom, called shells.
72.3 g of ice at -15.0 o C has heat energy added to it until it becomes steam at 145 o C. Calculate the total amount of heat energy needed (in Joules) to accomplish this.
Answer:
H = 226,311.66J
Explanation:
Hello there!
In this case, according to the thermodynamic path ice takes up to steam:
1. Ice (-15°C) --> Ice (0°C) H1
2. Ice (0°C) ---> Water (0°C) H2
3. Water (0°C) --> Water (100°C) H3
4. Water (100°C) --> Steam (100°C) H4
5. Steam (100°C) --> Steam (145°C) H5
It is possible for us to infer that H1, H3 and H5 are computed by means of the mass, specific heat and change in temperature as sensible heat. On the flip side, H2 and H4 are computed as latent heat. Thus, we proceed as follows:
[tex]H1=72.3g*2.093\frac{J}{g\°C}(0+15)\°C=2269.86J\\\\H2=72.3g*334.1\frac{J}{g}=24155.43J\\\\H3=72.3g*4.184 \frac{J}{g\°C}*(100-0)\°C=30250.32J\\\\H4=72.3g*2255.83\frac{J}{g}=163096.51J\\\\H5=72.3g* 2.010 \frac{J}{g\°C}*(145-100)\°C=6539.54J[/tex]
Then, we add them up to obtain the total heat:
[tex]H=H1+H2+H3+H4+H5\\\\H=2269.86J+24155.43J+30250.32J+163096.51J+6539.54J\\\\H=226311.66J[/tex]
Best regards!
Which of the following is not a force
A. Weight
B. Friction
C. Acceleration
D. Air resistance
Answer:
Acceleration
Explanation:
Acceleration doesn't change one moment to the next, and therefore, doesn't count as a force.
The answer option which is not a force is: C. Acceleration.
What is a force?A force can be defined as a push or pull of an object or physical body, which typically results in a change of motion (acceleration), especially due to the interaction of the object with another.
The examples of a force.In Science, the three (3) most common examples of a force include the following:
WeightFrictionAir resistanceIn conclusion, acceleration is not an example of a force but a change in the rate of velocity of an object with respect to time.
Read more on force here: brainly.com/question/1121817
Please help me out ........
Answer:c
Explanation:
Weathering (breaking off sediments upriver), erosion (moving the sediments down river) and finally deposition caused the changes in the river.
What helps hold sediments in place to prevent erosion?
Answer:
Explanation:
Maintaining a healthy, perennial plant cover.
Mulching.
Planting a cover crop – such as winter rye in vegetable gardens. ...
Placing crushed stone, wood chips, and other similar materials in heavily used areas where vegetation is hard to establish and maintain.???
Name the following acid: HNO3
Answer:
Nitric Acid
Explanation:
Also known as aqua Fortis and spirt of niter
Hope it helps
Answer:
Nitric Acid
Explanation:
"Nitric acid (HNO3), also known as aqua fortis and spirit of niter, is a highly corrosive mineral acid. The pure compound is colorless, but older samples tend to acquire a yellow cast due to decomposition into oxides of nitrogen and water. Most commercially available nitric acid has a concentration of 68% in water."
==================================================================
Hope I Helped, Feel free to ask any questions to clarify :)
Have a great day!
More Love, More Peace, Less Hate.
-Aadi x
Explain Newton’s third law of motion.
Answer:
His third law states that for every action (force) in nature there is an equal and opposite reaction. In other words, if object A exerts a force on object B, then object B also exerts an equal and opposite force on object A. Notice that the forces are exerted on different objects.
Explanation:
what resource is nonrewable?
A. Pigs
B. Wheat
C. Water
D. Petroleum
Answer:
d
Explanation:
The form in which the chemical energy is stored in cells during photosynthesis
A) Photosynthesis
B)Products
C)Chloroplasts
D)Glucose
what is the number of moles of solute in 250 mL of a .80M solution
Answer:
There are 0.1 moles of solute in 250 mL of 0.4 M solution
Explanation:
because it is
Explain why NH3 has a higher solubility in water than SbHz.
Answer: NH3 has a higher solubility rate than SbH3 because it has much stronger bonds. ... HoCH2CH2OH because it can form two bonds with water compared to the other molecule which can only form one.
HOPE THIS HELPS
Given the reaction: HNO2 (aq) <-> H+ (aq) + NO2- (aq); write the ionization constant for the reaction.
Answer:
see explanation
Explanation:
HNO₂ ⇄ H⁺ + NO₂⁻
Ka = [H⁺][NO₂⁻]/[HNO₂]
Stem cells can differentiate into how many types of body cells?
Describe how the freeze-thaw cycle of ice will change the shape of this rock over time. PLSSSS HELP ASAP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!✋
Freeze-Thaw Weathering
This action can widen the cracks in the rock, and when the temperature rises above freezing, the ice thaws, allowing the water to seep further into the cracks. As this process of freezing and thawing happens repeatedly, the rock begins to weaken and eventually breaks apart into angular fragments.
Answer:
Physical weathering is caused by the effects of changing temperature on rocks, causing the rock to break apart. The process is sometimes assisted by water. ... Freeze-thaw occurs when water continually seeps into cracks, freezes and expands, eventually breaking the rock apart.
Explanation:
hope this helps
Black coffee has a pH of around 5. Since pH and pOH have an inverse relationship, black coffee has a pOH of ___.
Answer:
pOH = 9.
Explanation:
The inverse relationship between the pH and pOH of any given solution can be written as:
pH = 14 - pOH
Or conversely:
pOH = 14 - pH
With the above information in mind we can use the given pH to calculate the pOH:
pOH = 14 - pH
pOH = 14 - 5
pOH = 9
Thus, black coffee has a pOH of 9.
1. What is the molarity of an HCl solution if 50.0 mL of it is neutralized in a titration by
40.0 mL of 0.400 M NaOH? (0.32)
Answer:
C1 * V1 = C2 * V2
Explanation:
Where ‘C’ and ‘V’ refer to concentration and volume, ‘1’ and ‘2’ to solution 1 and 2 respectively. So, if ‘1’ refers to the HCl solution, we want to solve this equation for C1.
V1 = (C2*V2)/C1 = (0.4 * 50)/40 = 0.5 M
If you wanna get oil to 180 celcius when it starts at 20 how many units of thermal energy is needed?
Answer:
The thermal energy (heat) needed, to raise the temperature of oil of mass 'm' kilogram and specific heat capacity 'c' from 20°C to 180°C is 160·m·c joules
Explanation:
The heat capacity, 'C', of a substance is the heat change, ΔQ, required by a given mass, 'm', of the substance to produce a unit temperature change, ΔT
∴ C = ΔQ/ΔT
ΔQ = C × ΔT
C = m × c
Where;
c = The specific heat capacity
ΔT = The temperature change = T₂ - T₁
∴ ΔQ = m × c × ΔT
Therefore, the thermal energy (heat) needed, ΔQ, to raise the temperature of oil of mass 'm' kilogram and specific heat capacity, 'c' from 20°C to 180°C is given as follows;
ΔQ = m × c × (180° - 20°) = 160° × m·c
ΔQ = 160·m·c joules
What is the correct term for a community of plants and animals and their physical surroundings?
individuals (organism)
continent
territory
ecosystem
Which statement best describes how an existing theory is often affected by the development of new technology?
An existing theory is thrown out and replaced with a completely new theory based on the new observations.
An existing theory is modified so that it can explain both the old and new observations.
An existing theory remains the same because a theory is a proven fact that is always true.
An existing theory is kept unchanged while a new theory is developed to explain the new observations.
Answer: An existing theory is modified so that it can explain both the old and new observations.
Explanation:
Answer:
The correct anwser would be B
Explanation:
HELP a #QUEEN out pls??
Type the correct answer in each box.
Balance the equation.
_____SiO2 + ______CaC2 → _____Si + _______CaO + _____CO2
The coefficients, in order of the blanks, are 5, 2, 5, 2, 4.
how did wolves, whales, and the mystery fossil become so different from their ancestor populations
Explanation:
The differences between whales, wolves, and the Mystery Fossil may have evolved because the ancestors of each evolved in different environments. Populations can become separated into different environments. ... Over generations, two populations of the same species can become more and more different.
Can someone please please help me please
Explanation:
there is what i got hope it helps. ❤❤❤❤❤
During a tug-of-war, the rope accelerates towards the left. What is true about the forces acting on the rope?
Explanation:
Forces are given many names, such as push, pull, thrust, lift, weight, friction, and tension. Traditionally, forces have been grouped into several categories and given names relating to their source, how they are transmitted, or their effects. The most important of these categories are discussed in this section, together with some interesting applications. Further examples of forces are discussed later in this text.
List the methods of separation used in water purification...... ( HELP PLEASE )
Answer:
I can list four. These are the main ones.
Bolling
Filtration
Distillation.
Chlorination
Explanation:
3. Move the slider on the burette to the top to add about 25 mL of NaOH to the flask. What
happens, and what does this tell you about the pH of the flask?
Page Break
LED
Answer:
When you move the burette slider to the top of a flask and add about 25 mL of NaOH to the flask, you will cause a concentration of OH- molecules. This will make the solution become a basic solution and make the litmus paper blue.
Explanation:
After reading your question, we can see that you are carrying out a test to discover the nature of the pH of a solution. This type of test uses litmus paper, which is an indicator of the presence of acids and bases, being able to determine the pH of a solution. This paper is soaked in organic ink and when placed in an acidic solution, it is red in color. However, when placed in a basic solution it has a blue color.
An acidic solution is one that has a high concentration of H+ atoms and has the ability to donate electrons. The basic solution, on the other hand, has a high concentration of OH- and has the capacity to receive electrons.
When you move the burette slider to the top of a flask and add about 25 mL of NaOH to the flask, you will cause a concentration of OH- molecules. This will make the solution become a basic solution and make the litmus paper blue, that is, the solution has the basic pH.
