Answer:
1.40 moles of H₂SO₄.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below below:
2Al + 3H₂SO₄ —> Al₂(SO₄)₃ + 3H₂
From the balanced equation above,
2 moles of Al reacted with 3 moles of H₂SO₄.
Finally, we shall determine the number of mole of H₂SO₄ required to react with
0.93 moles of Al. This can be obtained as follow:
From the balanced equation above,
2 moles of Al reacted with 3 moles of H₂SO₄.
Therefore, 0.93 moles of Al will react with = (0.93 × 3)/2 = 1.40 moles of H₂SO₄.
Thus, 1.40 moles of H₂SO₄ is needed for the reaction.
Consider the reaction between an alcohol and tosyl chloride, followed by a nucleophile. Write the condensed formula of the expected main organic product.
Answer:
RCl
Explanation:
Here, let us take ROH to represent the formula of our alcohol where R is the alkyl group.
The reaction of ROH with tosyl chloride yields an ester called a tosylate. It is the O-H bond not the C-O bond that is cleaved when the tosylate is formed.
Tosylates are good leaving groups, attack of a nucleophile such as Cl^- completes the mechanism leading to the formation of RCl.
what is the molar mass of Disodium sulfide nonahydrate
(Compound)
I'm confused about the number of moles per element
Answer:
240 g/mol
Explanation:
We'll begin by writing the chemical formula of Disodium sulfide nonahydrate. This is illustrated below:
The molecular formula of disodium sulfide nonahydrate is Na₂S.9H₂O
Finally, we shall determine the molar mass of disodium sulfide nonahydrate, Na₂S.9H₂O. This can be obtained by adding the individual molar mass of the element present in the compound as illustrated below:
Molar mass of Na₂S.9H₂O = (23×2) + 32 + 9[(2×1) + 16]
= 46 + 32 + 9[2 + 16]
= 46 + 32 + 9[18]
= 46 + 32 + 162
= 240 g/mol
Thus, the molar mass of disodium sulfide nonahydrate, Na₂S.9H₂O is 240 g/mol
What is the apparent bond energy of a carbon–sulfur bond in cos?
This question is incomplete, the complete question is;
The enthalpy change for the reaction between two molecules of carbon oxysulfide (COS) to form one molecule of CO₂ and one molecule of CS₂, as shown below, is -3.2 x 10⁻²⁴ kJ per molecule of COS.
The bond energy for the C-S bond in C=S has been determined to be 552 kJ/mol.
What is the apparent bond energy of a carbon-sulfur bond in COS?
NOTE: A C=O bond adjacent to another double bond is not the same as a C=O bond that is not adjacent to another double bond.
Answer:
The apparent bond energy of a carbon–sulfur bond is 550.1 kJ/mole
Explanation:
Given the data in the question and the figure 8.122 in the image below;
the given reaction can be written as follows;
2COS -----→ CO₂ + CS₂
Δ[tex]H_{rxn}[/tex] = ∑ Bond Energy ( reactants) - ∑ Bond Energy (products)
= [ (2 × C=O) + (2 × C=S) ] - [ (2 × C=O) + ( 2 × C=S) ]
we know that;
Δ[tex]H_{rxn}[/tex] = -3.2 x 10⁻²⁴ kJ per molecule
= -3.2 x 10⁻²⁴ kJ × 2 × 6.023 × 10²³ kJ/mole
= -3.85 kJ/mole
Hence;
-3.85 kJ/mole = (2 × C=S)[tex]_{reactant}[/tex] - ( 2 × C=S)[tex]_{product}[/tex]
-3.85 kJ/mole = (2 × C=S)[tex]_{reactant}[/tex] - ( 2 × 552 kJ/mole)
(2 × C=S)[tex]_{reactant}[/tex] = -3.85 kJ/mole + 1104 kJ /mole
(2 × C=S)[tex]_{reactant}[/tex] = 1100.15 kJ/mole
2 × ( C=S)[tex]_{reactant}[/tex] = 1100.15 kJ/mole
( C=S)[tex]_{reactant}[/tex] = 1100.15 kJ/mole / 2
( C=S)[tex]_{reactant}[/tex] = 550.1 kJ/mole
Therefore, the apparent bond energy of a carbon–sulfur bond is 550.1 kJ/mole
The apparent bond energy of a carbon-sulfur bond in COS is equal to 550.08 kJ/mol.
Given the following data:
Enthalpy change of reaction = [tex]-3.2 \times 10^{-24}\;kJ/mol.[/tex]Bond energy of C=S = 552 kJ/mol.Scientific data:
Avogadro's number = [tex]6.02 \times 10^{23}[/tex]To determine the apparent bond energy of a carbon-sulfur bond in COS:
First of all, we would write a balanced chemical equation for the chemical reaction as follows:
[tex]2COS \rightarrow CO_2 + CS_2[/tex]
The enthalpy change of two (2) moles of COS is:
[tex]\Delta H_{rxn} = -3.2 \times 10^{-24}\times 2 \times 6.02 \times 10^{23}\\\\\Delta H_{rxn} =-3.85\;kJ/mol.[/tex]
Mathematically, the enthalpy change of a chemical reaction is given by this equation:
[tex]\Delta H_{rxn} = \sum Bond\;Energy_{(reactansts)} - \sum Bond\;Energy_{(products)}\\\\\Delta H_{rxn} = [(2\times C=O)+ (2\times C=S)]- [(2\times C=O)+ (2\times C=S)][/tex]
Substituting the parameters into the equation, we have;
[tex]-3.85 = (2\times C=S)- [2\times 552]\\\\(2\times C=S)=1104-3.85\\\\(2\times C=S)=1100.15\\\\(C=S)=\frac{1100.15}{2} \\\\(C=S)=550.08\;kJ/mol[/tex]
Therefore, the apparent bond energy of a carbon-sulfur bond in COS is equal to 550.08 kJ/mol.
Read more: https://brainly.com/question/13197037
Complete Question:
The enthalpy change for the reaction between two molecules of carbon oxysulfide (COS) to form one molecule of [tex]CO_2[/tex] and one molecule of [tex]CS_2[/tex], as shown below, is [tex]-3.2 \times 10^{-24}[/tex] kJ per molecule of COS. The bond energy for the C-S bond in C=S has been determined to be 552 kJ/mol. What is the apparent bond energy of a carbon-sulfur bond in COS?
[Note: A C=O bond adjacent to another double bond is not the same as a C=O bond that is not adjacent to another double bond.]
What volume (mL) of 0.250 M HNO3 is required to titrate (neutralize) a solution containing 0.276 g of KOH?
Answer:
Volume = 19.68 ml
Explanation:
The equation of the reaction is given as;
HNO3 + KOH ---> KNO3 + H2O
1 mol of HNO3 reacts 1 mol of KOH
Converting 0.276 g of KOH to mol;
Number of moles = Mass / Molar mass
Number of moles = 0.276g / 56.1056 g/mol
Number of moles = 0.00492
Since the mole relationship is 1 = 1;
This means 0.00492 mol of HNO3 reacts with 0.00492 mol of KOH
The relationship between molarity and volume id given as;
Molarity = Number of moles / Volume
Volume = Number of moles / Molarity = 0.00492 mol / 0.250 M
Volume = 0.01968 L
Volume = 19.68 ml
the tense..........used to describe events that have not yet taken place
Answer:
Future tense.
Explanation:
The different tenses in grammar are used to denote the time or condition of when the action occurs. This means that tenses tell us the form or condition of the verbs.
The present tense tells us about a present scene while the past tense tells us about an action that happened in the past. Likewise, the future tense tells us about an event that will happen in the future. This means that future tenses are used to describe events that have not taken place, and are yet to happen.
Quartz,SiO2,contains 46.7% silicon. What mass of silicon is present in 381 g of quartz?
Answer:
119 g.
Explanation:
Ammonia reacts with oxygen to form nitrogen dioxide and water according to the
following equation:
4NH71875) + 70212) ---> 4NO2/2) + 6H2013)
You react ammonia and oxygen, and at the end of the experiment you find that you
produced 23 g of water and have 8.52 g of ammonia left over. Determine the mass of
oxygen reacted.
17.66 g 02
40.85 g 02
O 47.66 g 02
71.49 g 02
35.02 g 02
B
Suppose you wanted to cause Pb2+ ions to come out of solution as solid Pb. Which metal(s) could you use to accomplish this? Au Zn Ca Ni Ag AlFe
Answer:
Ca, Zn, Ni, Al, Fe
Explanation:
The activity series is an arrangement of metals in order of decreasing reactivity.
Metals that are high up in the activity series are very reactive. They displace metals that are lower in the activity series from an aqueous solution of their salts.
The metals; Ca, Zn, Ni, Al, Fe are all above Pb in the activity series hence they will cause Pb2+ ions to come out of solution as solid Pb.
A more reactive metal displaces the less reactive metals in the solution. Ca, Al, Zn, and Fe can be accomplished to take out the [tex]\bold{ Pb^2^+}[/tex] from the solution as solid Pb.
Metal displacement Reaction:
In this type of reaction a more reactive metal displaces the less reactive metals in the solution.
The metal reactivity series
Ca > Al > Zn > Fe > Ni > Pb > Ag > Au
The lead ( Pb) is less reactive than the Ca, Al, Zn, and Fe.
Therefore, Ca, Al, Zn, and Fe can be accomplished to take out the [tex]\bold{ Pb^2^+}[/tex] from the solution as solid Pb.
To know more about Displacement reaction, refer to the link:
https://brainly.com/question/4339209
Draw the products formed from 2-methyl-1-pentene by sequences (1.) and (2.).
1. hydroboration followed by oxidation with alkaline hydrogen peroxide.
2. acid-catalyzed hydration.
Answer:
See explanation and image attached
Explanation:
The mechanism for both the hydroboration of 2-methyl-1-pentene and acid-catalyzed hydration are shown i the image attached to this answer.
The both processes involve addition reaction. Hydroboration is similar to hydration but the orientation of addition is anti - Markovnikov in nature.
The acid-catalyzed hydration of 2-methyl-1-pentene yields a minor product and a major product. The major product is an accordance with Markovnikov rule as shown by the reaction mechanism. The minor product is anti - Markovnikov.
when an object kinetic energy changes what happens to the object??
Answer:
2. A 3.C
Explanation:
Examine the peptide. Peptide with three amino acid residues. The first residue contains a methyl group side chain. The second residue contains a hydrogen atom side chain. The third residue contains a hydroxymethyl group side chain. The amino group of the first side chain binds to the unshown remainder of the peptide. The carboxyl group of the third side chain binds to the unshown remainder of the peptide. Determine which amino acids are present in the peptide.
Answer:
The peptide is composed of Alanine, Glycine and Serine and is written in shorthand as: Ala-Gly-Ser.
Explanation:
Amino acids contain an α-carboxyl group, an α-amino group, and an R side chain which distinguishes one amino acid from another.
Peptides are chains of amino acids which are covalently bonded together through substituted amide linkages known as peptide bonds. The reaction occurs between an amino group of one amino acid and the carboxyl group of another amino acid with the removal of a water molecule.
A tripeptide is a peptide composed of three amino acids linked together by peptide bonds.
In the given peptide, the first residue contains a methyl group side chain. The second residue contains a hydrogen atom side chain. The third residue contains a hydroxymethyl group side chain.
The amino acid that contains a methyl group side chain is Alanine (Ala).
The amino acid that contains a hydrogen atom side chain is Glycine, Gly.
The amino acid that contains a hydroxymethyl group side chain is Serine, Ser.
Therefore, the peptide is composed of Alanine, Glycine and Serine and is written in shorthand as: Ala-Gly-Ser.
A cough syrup has a density of 1.20 g/mL. A doctor orders 48.0 of the syrup for a sick child. How many teaspoons will you administer to the child
Answer:
because I want to save life
It is the highest point in a wave.
Answer:
Crest is the highest point of a wave
what tranports oxygen into the cells?
Answer:
il got this from goglle
Explanation:
hope it helps
Which of the following statements correctly explain the relationship between the solubility of a gas and its pressure?
A. As pressure is increased, the rate at which gas molecules enter the solution decreases.
B. More gas molecules are soluble as pressure is increased.
C. The solubility of a gas decreases with a decrease in pressure.
D. The solubility of nitrogen gas at 2.00 atmatm is twice the solubility of the gas at 1.00 atmatm.
E. The concentration of gas particles in the solution is higher at 4.25 atmatm than at 1.00 atmatm.
F. Fewer gas molecules are soluble at higher pressures.
G. As pressure decreases, the concentration of gas molecules in the solution increases.
Answer:
B, C, D, E
Explanation:
According to Henry's law, as the pressure is increased, the solubility of a given gas increases. So, solubility is directly proportional to pressure.
Thus, the following statements are correct:
B. More gas molecules are soluble as pressure is increased.
Is correct because as the pressure is increased, the solubility increases.
C. The solubility of a gas decreases with a decrease in pressure.
Is correct because solubility and pressure are directly proportional: if the pressure is decreased, the solubility will be decreased.
D. The solubility of nitrogen gas at 2.00 atm is twice the solubility of the gas at 1.00 atm.
Is correct because 2.00 atm is twice 1.00 atm, so if the pressure is increased twice, the solubility is increased twice.
E. The concentration of gas particles in the solution is higher at 4.25 atm than at 1.00 atm.
Is correct because 4.25 atm>1.00 atm (the higher the pressure, the higher the solubility, and therefore the concentration of gas particles in solution).
The remaining options (A, G) are incorrect. They contradict Henry's law.
the generator is connected to a _____, which supplies our _____ with electricity.
Answer:
neutral and current
Explanation:
sorry if im wrong ;(
Consider two compounds. Compound A contains 15.7 g of sulfur and 18.6 g of fluorine. Compound B contains 25.4 g of sulfur and 60.2 g of fluorine. For Compound A, the ratio of fluorine to sulfur is 1.18. For Compound B, the ratio of fluorine to sulfur is 2.37. Using the Law of Definite Proportions (also called the Law of Constant Composition), could Compound A and Compound B be the same compound
Answer:
No, compound A and B are not the same compound
Explanation:
According to the law of definite proportion "every chemical compound contains fixed and constant proportions (by mass) of its constituent elements." (Encyclopedia Britannica)
We can see in the question that the ratio of flourine to sulphur in compound A is 1.18 while the ratio of flourine to sulphur in compound B is 2.37.
The two chemical compounds do not contain a fixed proportion by mass of their constituent elements therefore, they can not be same compound according to the law of definite proportions.
Select the statement that best describes components of complete and incomplete metamorphosis. (2 points)
a. During incomplete metamorphosis, the nymph molts its exoskeleton. During complete metamorphosis, the larva forms a chrysalis or cocoon.
Selected:b. During incomplete metamorphosis, the pupa molts its exoskeleton. During complete metamorphosis, the nymph wraps itself in a chrysalis.This answer is incorrect.
c. Incomplete and complete metamorphosis both have four major stages.
d. Incomplete and complete metamorphosis both have three major stages. btw b was wrong
Answer:
a. During incomplete metamorphosis, the nymph molts its exoskeleton. During complete metamorphosis, the larva forms a chrysalis or cocoon.
Explanation:
The first stage of incomplete metamorphosis is the egg. During this time, the insect will hatch into a form called a nymph. The nymph is basically a small version of the adult insect. This is very similar to how a child looks like his or her parents.
The correct statement that describes components of complete and incomplete metamorphosis is: d. Incomplete and complete metamorphosis both have three major stages.
What is metamorphosis ?Metamorphosis is a biological process that some animals undergo to transform from one developmental stage to another, typically from a juvenile form to an adult form. This process involves a series of physical and physiological changes that can be dramatic and even complete.
Incomplete metamorphosis consists of three stages: egg, nymph, and adult. The nymph hatches from the egg and looks similar to the adult but lacks wings and reproductive organs. The nymph molts its exoskeleton several times and gradually develops into an adult.
Complete metamorphosis also consists of three stages: egg, larva, pupa, and adult. The larva hatches from the egg and looks completely different from the adult, often worm-like in appearance. The larva undergoes a series of molts and grows larger, then forms a pupa or chrysalis. Inside the pupa or chrysalis, the larva undergoes a complete transformation and emerges as an adult.
Find more on metamorphosis:
https://brainly.com/question/31275856
#SPJ3
HELPPPPPPP PLZZZ
An apple is growing in the top branches of an apple tree. The stem breaks and the apple falls, moving faster and faster until it hits the ground.
Where is the energy to increase the speed of the apple coming from?
Energy is being created as the apple falls
Energy is not related to the speed of an object
The potential energy the apple had due to its height is converted to kinetic energy
The force from the wind that broke the stem is also pushing the apple down
Answer:
The potential energy the apple had due to its height is converted to kinetic energy
Explanation:
When an apple falls from the tree to the ground, its energy of position stored as gravitational potential energy is converted to kinetic energy, the energy of motion, as it falls. When the apple hits the ground, kinetic energy is transformed into heat energy.
PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEWSE HELP PLEASE HELP ANYBODY!!! CHEMISTRY DUE IN 5 MINUTES!! DIMENSIONAL ANALYSIS
How many moles of O2 are in the sample of 3.6 kilograms of air if 21% of the air is oxygen, O2, by mass?
WILL GIVE BRAINLIEST PLEASE ANYONE WHO KNOWS HOW TO DO MOLE CONVERSIONS AND DIMENSIONAL ANALYSIS
Answer:
23.6 moles
Explanation:
From the question given above, the following data were obtained:
Mass of air = 3.6 Kg
Mass percentage of O₂ = 21%
Number of mole of O₂ =?
Next, we shall convert 3.6 Kg of air to grams (g). This can be obtained as follow:
1 kg = 1000 g
Therefore,
3.6 Kg = 3.6 Kg × 1000 / 1 kg
3.6 Kg = 3600 g
Next, we shall determine the mass of O₂ in the air. This can be obtained as follow:
Mass of air = 3600 g
Mass percentage of O₂ = 21%
Mass of O₂ =?
Mass of O₂ = 21% × 3600
Mass of O₂ = 21/100 × 3600
Mass of O₂ = 756 g
Finally, we shall determine the number of mole of O₂ in the sample of air. This can be obtained as follow:
Mass of O₂ = 756 g
Molar mass of O₂ = 2 × 16 = 32 g/mol
Number of mole of O₂ =?
Mole = mass /Molar mass
Number of mole of O₂ = 756 / 32
Number of mole of O₂ = 23.6 moles
Thus, the number of mole of O₂ in the
sample of air is 23.6 moles
Answering the following questions will help you focus on the outcomes of the experiments.
Experiment 1:
1. What happens to the water in the small tube as the water in the test tube absorbs heat?
2. Why do you think a small tube was used to observe the expansion of water?
Experiment 2:
1. Compare the circumference of the balloon before and after freezing. What is the percent increase in this
measurement?
Combined Results
Write a summary paragraph discussing this experiment and the results. Use the following questions and topics to help
guide the content of your paragraph.
Summarize the conclusions that you can draw from this experiment. Use the questions above to guide your ideas.
2. Summarize any difficulties or problems you had in performing the experiment that might have affected the results.
Describe how you might change the procedure to avoid these problems.
3. Describe at least two real-world issues or examples that illustrate the findings of this experiment.
WRITER
Word Count: of 400
OVERALL SCORE:
Answer:
ex.1
1.The water in the test tube expands as it is heated. There is only one direction to expand in, the glass tube. This glass tube is narrow so that a small change in volume will result in a considerable change in height; your signal is amplified. This is the same phenomenon as in thermometers with a glass bulb on the lower end.
2. there will be a thermal expansion will happened.
How can people conserve water at home?
Answer:
Turning off the water while brushing teeth, watching shower time.
Explanation:
Answer:
Take shorter showers.
Install water-saving shower heads or flow restrictors.
Turn off the water while brushing your teeth.
Turn off the water while shaving.
Explanation:
have a nice day
Is anyone good at 10th grade chemistry if so can someone help me please ?
If I have 5 moles of a gas at a pressure of 6.5 atm and a volume of 14 liters, what is the temperature?
PV=nRT
Answer: 190.9K
Explanation:
5.6(14) = 5(.0821)T or (5.6*14)/(5(.0821))
78.4 = 0.4105T
190.9K = T
Which of the following 0.250 m solutions has the greatest freezing-point depression?
CH2O
CaCl2
KCl
Answer:
CaCl2
Explanation:
Cacl2 would have greatest freezing point depression because in this case the vant Hoff factor is 2
More will be the value of vant Hoff factor more will be the depression in freezing point when concentration of all electrolyte is same
What is the volume of 3.5 moles of carbon dioxide (CO2) gas at STP?
0 6.40 |
0.16 L
0 78.4 L
Cannot be determined from the information given
Answer:
78.4
Explanation:
Determine the entropy change for the combustion of gaseous propane, C3H8, under standard state conditions to give gaseous carbon dioxide and water.
Answer:
ΔS°reaction = 100.9 J K⁻¹ (mol C₃H₈)⁻¹
Explanation:
The equation for the reaction is given as;
C₃H₈(g) + 5O₂(g) → 4H₂O(g) + 3CO₂(g)
In order to determine the entropy change, we have to use the entropy valuues for the species in the reaction. This is given as;
S°[C₃H₈(g)] = 269.9 J K⁻¹ mol⁻¹
S°[O₂(g)] = 205.1 J K⁻¹ mol⁻¹
S°[H₂O(g)] = 188.8 J K⁻¹ mol⁻¹
S°[CO₂(g)] = 213.7 J K⁻¹ mol⁻¹
The unit of entropy is J K⁻¹ mol⁻¹
Entropy change for the reaction is given as;
ΔS°reaction = ΔS°product - ΔS°reactant
ΔS°reaction = [(4 * 188.8) + (3 * 213.7)] - [269.9 + (5 * 205.1)]
ΔS°reaction = 100.9 J K⁻¹ (mol C₃H₈)⁻¹
The entropy change for the combustion of gaseous propane, under standard state conditions 100.9 J K⁻¹.
The equation for the combustion of gaseous propane is given as follows:-
C₃H₈(g) + 5O₂(g) → 4H₂O(g) + 3CO₂(g)
In order to determine the entropy change, we have to use the entropy values for the species in the reaction. This is as follows:-
S°[C₃H₈(g)] = 269.9 J K⁻¹ mol⁻¹
S°[O₂(g)] = 205.1 J K⁻¹ mol⁻¹
S°[H₂O(g)] = 188.8 J K⁻¹ mol⁻¹
S°[CO₂(g)] = 213.7 J K⁻¹ mol⁻¹
The unit of entropy is J K⁻¹ mol⁻¹
Entropy change for the reaction is given as;
ΔS°reaction =nproduct ΔS°product - nreactantΔS°reactant
ΔS°reaction = [(4mol * 188.8 J K⁻¹ mol⁻¹) + (3 mol * 213.7 J K⁻¹ mol⁻¹)] - [(1 mol*269.9J K⁻¹ mol⁻¹ )+ (5 mol* 205.1 J K⁻¹ mol⁻¹)]
ΔS°reaction = 100.9 J K⁻¹
So, the entropy change for the combustion of gaseous propane is 100.9 J K⁻¹ .
To know more about:-
brainly.com/question/14818671
forms of energy reflection
Answer:
any of these
Explanation:
kinetic energy: kinetic is motion, or released energy
Potential energy: porential energy is the energy of position or stored energy.
Thermal energy: is heat energy, it is stored energy that creats heat.
A 52.9g sample of brass, which has a specific heat capacity of 0.375·J·g^−1°C^−1, is put into a calorimeter (see sketch at right) that contains 100.0g of water. The temperature of the water starts off at 15.0°C. When the temperature of the water stops changing it's 18.4°C. The pressure remains constant at 1 atm. Calculate the initial temperature of the brass sample.
Answer: 90.04°C
Explanation: Calorimeter is a device measures the amount of heat of a chemical or physical process. An ideal calorimeter is one that is well-insulated, i.e., prevent the transfer of heat between the calorimeter and its surroundings. So, the net heat change inside the calorimeter is zero:
[tex]q_{1}+q_{2}=0[/tex]
Rearraging, it can be written as
[tex]q_{1}=-q_{2}[/tex]
showing that the heat gained by Substance 1 is equal to the energy lost by Substance 2.
In our case, water is gaining heat, because its temperature has risen and so, brass is losing energy:
[tex]q_{water}=-q_{brass}[/tex]
Calculating:
[tex]m_{w}.c_{w}.\Delta T=-[m_{b}.c_{b}.\Delta T][/tex]
[tex]100.4.18.(18.4-15)=-[52.9.0.375.(18.4-T)][/tex]
Note: final temperature is the same as the substances are in thermal equilibrium.
Solving:
418(3.4)= - 365.01 + 19.8375T
19.8375T = 1786.21
T = 90.04
The initial temperature for the sample of brass was 90.04°.
Where did the magma and sediment that formed the rock of the Great Plains and the Rocky
Mountains come from?
Which claim do you think is more likely to be true?
Claim 1: The sediment that formed the Great Plains came from the rock of the Rocky
Mountains.
Claim 2: The magma that formed the Rocky Mountains came from the rock of the Great Plains.
Answer:
1
Explanation seems right
The magma and sediments formed in the great plains are came from the rocks of the rocky mountains. Therefore, claim 1 is correct.
What is sedimentation?Sedimentation is the geographical process of accumulation or deposition of the minerals and organic particles from the earth's surface is called sedimentation. This process results in the formation of sedimentary rocks.
Weathering or erosion of rocks by wind, water or other chemicals leads to the geological debris which then move to other places deposits somewhere.
Rocks in the rocky mountains undergo erosion and the mass movements created by wind or water leads to the sedimentation of these rocky solids to other places. The rocks in the Great planes are reached there by the mass movement of the rocks of rocky mountains. Hence, claim 1 is correct.
To find more on sedimentation, refer here:
https://brainly.com/question/14306913
#SPJ5
From what did Oceans form?
Answer:
God
Explanation:
