Answer:
The correct answer is the last option
Explanation:
What is the role of the green substance chlorophyll in photosynthesis? (2 points)
Chlorophyll collects water from the ground.
Chlorophyll captures energy from the sun.
Chlorophyll captures carbon dioxide from the air.
Chlorophyll moves water up the stem to the leaves.
Answer:
captures energy from the sun
Explanation:
Answer:
☁️Chlorophyll captures energy from the sun. ☁️
You have a gas that has a pressure of 2 ATM and a volume of 10 L. What would be the new volume if the pressure was changed to 1 ATM ?
Answer:
20 LExplanation:
The new volume can be found by using the formula for Boyle's law which is
[tex]P_1V_1 = P_2V_2[/tex]
where
P1 is the initial pressure
P2 is the final pressure
V1 is the initial volume
V2 is the final volume
Since we're finding the new volume
[tex]V_2 = \frac{P_1V_1}{P_2} \\[/tex]
We have
[tex]V_2 = \frac{2 \times 10}{1} = 20 \\ [/tex]
We have the final answer as
20 LHope this helps you
Please help me on this!
What is fault?
Which type of baundary (divergent,convergent, or transform) do the most earthwakes occur on?
Explain what convection currents are.
Please help this is a test abt science
How many grams of Carbon Dioxide can be produced by the complete combustion of 140.0 grams of propene; C3H6? If the actual yield turns out to be 200.0 grams of carbon dioxide, what is the percent yield?
Answer:
2 C3H6 + 9 O2 6 H2O + 6 CO2
Theo. yield is 440.0 g CO2, % yield = 45.45% Explanation: hope it helps here for ur service
439.16 g of carbon dioxide is produced by complete combustion of 140 g of propene. The percent yield is 45.54%.
What is combustion?Combustion is defined as a high temperature exothermic reaction between a fuel which acts as a reductant and an oxidant which is usually atmospheric oxygen.It does not result in fire as the flame is visible only when substance which undergoes combustion vaporizes.
For combustion reactions to take place stoichiometry is followed according to which mass of reactants or products obtained or required is calculated.
2 C₃H₆ + 9 O₂ [tex]\rightarrow[/tex] 6 CO₂ + 6 H₂O
Here 2 molecules of propene react to give 6 molecules of carbon dioxide.
∴ for 140 grams of propene 140×264/84.16=439.16 g of molecules of CO₂ are produced.
Percent yield is calculated by dividing observed yield by theoretical yield which gives 45.54% according to this example.
Learn more about combustion,here:
https://brainly.com/question/14335621
#SPJ2
Which would easily give up more electrons during bonding? Use Periodic Table.
Answer:
I'm pretty sure that it's lithium because it gives up one of their 3 electrons, so li
Write a balanced equation for each reaction. KOH(aq) + H3PO4,(aq)
Answer:
3 KOH(aq) + H3PO4(aq) = K3PO4(aq) + 3 H2O
Explanation:
Explain why a change to the green-leaf population caused the wee-bug population to change in size?
Answer:
If there are fewer births than deaths, then the size of the population will decrease. Organisms in consumer populations get energy storage molecules from eating organisms in resource populations. The more energy storage molecules available to a population, the more the organisms in that population can reproduce.
A change to the green-leaf population caused the wee-bug population to change in size because wee-bug depends upon green leaves for their food.
What is the population?It is a group of organism of the same species living in a particular area.
The increase or decrease in the population of organisms depends upon factors such as available resources and predator population.
The green leaf is the food resource for wee bugs hence if the green leaf population increase then the wee bug's population will also be increased.
Therefore, a change to the green-leaf population caused the wee-bug population to change in size because wee-bug depends upon green leaves for their food.
Learn more about the population?
https://brainly.com/question/7979871
Don’t have to explain please just give me an answer
Answer:
the 3rd one is the answer
Would this be a strong or weak acid
Answer:
It Should be Strong Acid
Explanation:
Strong acids and bases ionize fully in an aqueous solution. Weak acids and bases also ionize, but only partially and the reaction is reversible. So how do we know if an acid or base is strong or weak? A simple way to determine strength is to add the acid or base to water— high reactivity means a stronger acid or base. This reactivity is measured with a value called the Ka or Kb value. It tells us how reactive an acid or a base is based on how many hydronium or hydroxide ions are formed during the reaction. Hope it helps :)
When do recessive traits show in an offspring?
Answer:
Only individuals with an aa genotype will express a recessive trait; therefore, offspring must receive one recessive allele from each parent to exhibit a recessive trait. One example of a recessive inherited trait is a smooth chin, as opposed to a dominant cleft chin.
Explanation:
One mole of each of these compounds is dissolved in water. Which will result in the solution with the greatest conductivity?
1. NaCl
2. Mg(CIO3)2
3. NiCiz
4. CaCl2
Answer:
1. NaCl .
Explanation:
Hello there!
In this case, it is necessary to keep in mind that just ionic compounds are able to conduct electricity and therefore, the more ionic the compound is, the more electricity it conducts. In such a way, we may be able to predict how ionic these compounds are, considering that the electronegativity increases from bottom to top and from left to right.
1. NaCl: this is the most ionic compound since it is at the leftmost group and bonded with chlorine, so this is the most conductive one.
2. Mg(CIO3)2: Mg is bonded to O, not to Cl, which makes the compound ionic but not as ionic as NaCl.
3. NiCl: Ni is more electronegative than Na and Mg, so even when this is ionic, it is not as ionic as NaCl.
4. CaCl2: This is similar to NaCl but since Ca is in group 2A, it is more electronegative than Na, which makes CaCl2 conductive but not as much as NaCl.
Best regards!
A ship is sailing at a speed of 5 km/hr. What distance has it covered, 2 hours after it left the port?
Answer:
10km
Explanation:
Answer:
[tex]\boxed {\boxed {\sf 10 \ kilometers}}[/tex]
Explanation:
Distance is the product of speed and time.
[tex]d=s \times t[/tex]
The speed of the ship is 5 kilometers per hour. The time is 2 hours.
s= 5 km/hr t= 2 hrSubstitute the values into the formula.
[tex]d= 5 \ km/hr * 2 \ hr[/tex]
Multiply. Note that the hours will cancel each other out.
[tex]d= 5 \ km * 2 \\d=10 \ km[/tex]
The ship covers a distance of 10 kilometers.
Two out of the three domain groups include prokaryotic organisms true or false
Group of answer choices
Answer:
True, there’s Prokaryotic and Eukaryotic
Explanation:
Eukaryotic are more complex and HAVE a nucleus, Prokaryotic are less complex and don’t have a nucleus
GIVING BRAINLIEST
What do the arrows at point 3 indicate?
O Cool air is above water.
O Warm air is above land.
O Warm air is cooling quickly.
O Cool air is warming quickly.
Answer:
D) Cool air is warming quickly.
Explanation:
d is the answer.
The arrows at point 3 indicates that Warm air is cooling quickly and the correct option is option C.
What is Sea Breeze?Sea breeze is a blowing breeze from sea towards land during the day is called sea breeze.
During the day, the land surface heats up faster than the water surface.
Therefore, the air above the land is warmer than the air above the ocean.
As a result, warm air rises. Therefore, the warmer air over the land surface is rising.
As the warm air over the land is rising, the cooler air over the ocean is flowing over the land surface to replace the rising warm air
Therefore, The arrows at point 3 indicates that Warm air is cooling quickly and the correct option is option C.
Learn more about Sea Breeze, here:
https://brainly.com/question/13015619
#SPJ7
Create the Equation: What is the Percent Yield of Ammonia (NH3) if 11.8 g is recovered in a reaction with 7.02 x 10^23 molecules of Hydrogen gas with excess Nitrogen gas?
I REALLY NEED THE ANSWER FOR THIS PLESASE ITS DUE IN 40 MINTUES
Answer:
Explanation:
The first thing that you need to do here is to calculate the theoretical yield of the reaction, i.e. what you get if the reaction has a
100
%
yield.
The balanced chemical equation
N
2
(
g
)
+
3
H
2
(
g
)
→
2
NH
3
(
g
)
tells you that every
1
mole of nitrogen gas that takes part in the reaction will consume
3
moles of hydrogen gas and produce
1
mole of ammonia.
In your case, you know that
1
mole of nitrogen gas reacts with
1
mole of hydrogen gas. Since you don't have enough hydrogen gas to ensure that all the moles of nitrogen gas can react
what you need
3 moles H (sub 2)
>
what you have
1 mole H (sub2)
you can say that hydrogen gas will act as a limiting reagent, i.e. it will be completely consumed before all the moles of nitrogen gas will get the chance to take part in the reaction.
So, the reaction will consume
1
mole of hydrogen gas and produce
1
mole H
2
⋅
2 moles NH
3
3
moles H
2
=
0.667 moles NH
3
at
100
%
yield. This represents the reaction's theoretical yield.
Now, you know that the reaction produced
0.50
moles of ammonia. This represents the reaction's actual yield.
In order to find the percent yield, you need to figure out how many moles of ammonia are actually produced for every
100
moles of ammonia that could theoretically be produced.
You know that
0.667
moles will produce
0.50
moles, so you can say that
100
moles NH
3
.
in theory
⋅
0.50 moles NH
3
.
actual
0.667
moles NH
3
.
in theory
=
75 moles NH
3
.
actual
Therefore, you can say that the reaction has a percent yield equal to
% yield = 75%
−−−−−−−−−−−−−
or 75 moles NH sub3
I'll leave the answer rounded to two sig figs.
Calculate the concentration imports per million ppm of DDT if a sample size of 5000 g contained 0.10 g DDT
Answer:
20ppm
Explanation:
parts per million are defined as the mass of solute in mg (In this case, mass of DDT) per kg of sample.
To solve this question we must find the mass of DDT in mg and the mass of sample in kg:
Mass DDT:
0.10g * (1000mg / 1g) = 100mg
Mass sample:
5000g * (1kg / 1000g) = 5kg
Parts per Million:
100mg / 5kg =
20ppmA gas occupies 10.2 L at 0.986 atm. What is the pressure if the volume increases to 16.0 L?
Answer:
0.629 atm
Explanation:
P1V1 = P2V2
P1 = 0.986 atm
V1 = 10.2 L
P2 = ?
V2 = 16.0 L
Solve for P2 --> P2 = P1V1/V2
P2 = (0.986 atm)(10.2 L) / (16.0 L) = 0.629 atm
Name the following acid: H2SO4
Answer:
Mineral Acid
Explanation:
Answer:
sulfuric Acid
Explanation:
Sulfuric acid, sulfuric also spelled sulphuric (H2SO4), also called oil of vitriol, or hydrogen sulfate, dense, colourless, oily, corrosive liquid; one of the most commercially important of all chemicals.
4. From the diagram above, what
would need to be the correct genotype for the two green beetles to have the outcome of generation 2?
a HH x hh
b. Hh x Hh
c. Hhxhh
d. Hh x HH
Which of the following is the best example of a symbiotic relationship?
Certain breeds of fish will often clean bigger fish. The cleaner fish gets food, the bigger fish gets a cleaning.
or
A foolish man decides to go swimming in shark-infested waters. As a result, he is bitten by a shark looking for food.
or
A pair of birds fight over a piece of food. The dominant bird wins.
or
The climate changes. As a result, hundreds of species become extinct and the land turns into a desert.
?
Answer:
Certain breeds of fish will often clean bigger fish. The cleaner fish gets food, the bigger fish gets a cleaning.
I'm not too sure.
Good luck! <3
Melissa's mother was making chocolate chip cookies, but told Melissa that she shouldn't eat the raw cookie dough. Why is it unsafe to eat raw dough? -0) A) The dough can kill healthy bacteria in our mouths that help digest food. B) People that are allergic to the ingredients in dough are able to eat it safely after it has been baked. The flour in the dough will rapidly begin to spoil so it isn't safe to eat it until the cookies have been baked. D) Ingredients, such as flour and eggs, that are used to make dough can have bacteria. Baking is a step that kills the bacteria. А A The MAIN difference between terrestrial planets and gas giants is IL
A balloon is filled with oxygen gas with a volume of 8.70 ML and a temperature of 318.2 K if the temperature increases to 337.8 K what would the new volume be
Answer:
The new volume will be 9.24 mL.
Explanation:
Charles's law determines that for a given sum of gas at constant pressure, as the temperature increases, the volume of the gas increases and as the temperature decreases, the volume of the gas decreases.
So, Charles's law is a law that says that when the amount of gas and pressure are kept constant, the quotient that exists between the volume and the temperature will always have the same value:
[tex]\frac{V}{T} =k[/tex]
When studying an initial state 1 and a final state 2, it is satisfied:
[tex]\frac{V1}{T1} =\frac{V2}{T2}[/tex]
In this case:
V1= 8.70 mLT1= 318.2 KV2= ?T2= 337.8 KReplacing:
[tex]\frac{8.70 mL}{318.2 K} =\frac{V2}{337.8 K}[/tex]
Solving:
[tex]V2=337.8K*\frac{8.70 mL}{318.2 K}[/tex]
V2= 9.24 mL
The new volume will be 9.24 mL.
How much more heat does it take to vaporize 1 mole of ethanol than to melt it?
Answer:
I do not know how to solve this bit i THINK 38.56
Explanation:
In your own words, describe the difference between Thermal Energy and Heat.
Answer:
Heat is the flow of thermal energy between two objects of different temperature whereas the thermal energy tells about how much is the transfer of energy due to temperature difference between two bodies. Hence thermal energy in transit gives heat
Write Avogadro's number in "longhand", and then in scientific notation.
Answer:
Explanation: the scientific notation used to calculate a mole is 6.022 x 1023.
Avogadro's number in scientific notation is 6.023×10²³ atoms, molecules, moles.
What is Avogadro's number?Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.
It has a SI unit of reciprocal mole whose numeric value is expressed in reciprocal mole which is a dimensionless number and is called as Avogadro's constant.It relates the volume of a substance with it's average volume occupied by one of it's particles .
According to the definitions, Avogadro's number depend on determined value of mass of one atom of those elements.It bridges the gap between macroscopic and microscopic world by relating amount of substance with number of particles.
Number of atoms can be calculated using Avogadro's number as follows: mass/molar mass×Avogadro's number.
Learn more about Avogadro's number,here:
https://brainly.com/question/11907018
#SPJ2
1.A sample of gas in a closed container occupies 250. mL at 1.25 atm of pressure. If the pressure increases to 2.00 atm while the temperature stays the same, what is the new volume in mL?
2.A sample of gas is held inside a flexible container where pressure is kept constant. At room temperature (21.1ºC), the container has a volume of 1.50 L. What is the volume of the gas if the container is placed in a deep freezer at -10.0ºC?
3.A sample gas is held inside a rigid container with a pressure of 50. kPa and a temperature of 290 K. What is the new temperature of the gas if the pressure is doubled?
Answer:
Una cantidad de gas ocupa un volumen de 80 cm3
a una presión de 750 mm Hg. ¿Qué volumen
ocupará a una presión de 1,2 atm.si la temperatura no cambia?
Explanation:
El volumen inicial de una cierta cantidad de gas es de 200 cm3
a la temperatura de 20ºC. Calcula el
volumen a 90ºC si la presión permanece constante.
please help
sorry if it’s a little hard to read
Explanation:
Potassium=19, metal
Nitrogen=7, nonmetal
Silver=47, metal
Iron=26, metal
Sodium=11, metal
Magnesium=12, metal
Oxygen=8, nonmetal
Copper=29, metal
Calcium=20, metal
Chlorine=17, nonmetal
Predict what happens when tin metal is placed into
a solution of nickel(II) iodide.
A. Tin(II) iodide forms
B. Tin metal dissolves
C. Nothing
D. Both a and b happen
E. Nickel is plated onto tin
Answer:
I would say A but I'm not sure
When tin metal is placed into a solution of nickel (II) iodide then nothing will occur.
What is reactivity series?Reactivity series of the metals tells about the increasing or decreasing orders of the reactivity of the metals.
According to the reactivity series, reactivity of nickel metal is more than the tin metal. So, if we add tin metal in the solution of nickel (II) iodide then no reaction occurs. Because the reactivity of tin is less as compare to nickel metal so it is not possible for tin to replace the nickel metal and get dissolve.
Hence, option (C) is correct i.e. nothing.
To know more about reactivity series, visit the below link:
https://brainly.com/question/17469010
What is the density of krypton gas (MM = 83.8 g/mol) at 3.00
atm and 100. °C?
g/L
Answer:
8.21
Explanation:
6. Soap contains 76.5% C, 11.3% O, and 12.2% H and the MW = 847, what is the
molecular formula?
Answer:
the molecular formula of the soap is C₅₄H₁₀₂O₆
Explanation:
Given;
composition of carbon, C = 76.5%
composition of oxygen, O = 11.3%
Composition of hydrogen, H = 12.2%
The empirical formula is calculated as follows;
C: 76.5% / 12 O: 11.3% / 16 H: 12.2% / 1
= 6.375 = 0.706 = 12.2
Divide through by the least number (0.706);
= 6.375/0.706 = 0.706 / 0.706 = 12.2 / 0.706
= 9 = 1 = 17
The empirical formula = C₉H₁₇O
The molecular formula is calculated as follows;
(C₉H₁₇O)n = 847
(9 x 12 + 17 x 1 + 16 x 1)n = 847
(108 + 17 + 16)n = 847
141n = 847
n = 847/141
n = 6
The molecular is (C₉H₁₇O)6 = C₅₄H₁₀₂O₆
Therefore, the molecular formula of the soap is C₅₄H₁₀₂O₆
