What does not allow electricity to run through it?

Answer:

Explanation:

I gave this formula as

What you should get - what you got

---------------------------------------------------   * 100

What you should get

Suppose you are talking about the specific heat of copper and you did a lab and did it fairly well and the specific heat came out to be 0.33

That's what you got, 0.33

What you should get is 0.35 according to the table you've given us.

% error = 0.35 - 0.33

                -------------- * 100

                      0.35

% error = 0.02 * 100/ 0.35

% error = 2/0.35

% error = 5.71

Now here is the really hard part. You have to decide what a positive error is and what a negative error.

A positive error using this formula means you are too low.

A Negative error means that you are too high, just the opposite of what you might think.

Can you show us the experimental value?

So basically, the accepted value would be under the Specific heat capacity of metal (e.g. 0.90, 0.35, 0.44, 0.12).

Your experimental value would be the specific heat capacity that you got from the lab.

You would first substract the experimental value from the accepted value

[tex]accepted \: value - experimental \: value [/tex]

and then you would divide the result by the experimental value

[tex]result \div experimental \: value[/tex]

and then, you would multiply the result of that by a hundred to get your percentage

[tex]result \times 100 = \% \: error[/tex]

//

The image shown is an example.

0.90 is our accepted value.

0.88 is our experimental value.

The overall percentage error I got is %2.27

Answer: c. so that you use the correct energy states

Explanation:

Enthalpy is the energy release or energy produced when a chemical reaction is carried out.

Enthalpy change is calculated by substracting the energy of reactants from the energy of products.

[tex]\Delta H=H_{products}-H_{reactants}[/tex]

As the energies are different for different states and thus the correct stale symbols in your balanced chemical equation must be given so that we use the correct energy values.

Answer: Magnets have a force which is known as no contact force. This force tries to attract the metallic objects near it, which makes it move.

Explanation:

Answer:

Calcium Carbonate base and Sulphuric acid.

CaCO3 and H2SO4

Answer:

Skeletal equation : Ca(OH)2 + H2SO4 ----> CaSO4 + H2O

Balanced equation : Ca(OH)2 + H2SO4 ---> CaSO4 + 2H2O

Hope it helps

N -3

Ba +2

Sr +2

F -1

I -1

Ca +2

Mg +2

S -2

S -2

Al +3

//

Ba3N2

SrF2

CaI2

MgS

Al2S3

//

I don't really understand 2.

Answer:

B-Sorry if this isn't right :/ Good luck.

Explanation:

Answer:

D. Scoot

Explanation:

Grew, Rude and truth all have the sound /OO/ scoot follows that pattern.

Answer:

5.3g of MgO would be produced

Explanation:

Based on the chemical reaction:

2Mg(s) + O₂(g) → 2MgO(s)

1 mole of Mg reacts per mole of oxygen.

To solve this question we need to convert the mass of each reactant to moles in order to find limiting reactant using the chemical equation:

Moles Mg -Molar mass: 24.305g/mol-:

3.8g Mg * (1mol / 24.305g) = 0.1563moles Mg

Moles O₂ -Molar mass: 32g/mol-:

2.1g O₂ * (1mol / 32g) = 0.0656 moles O₂

For a complete reaction of 0.0656 moles of O₂ are required:

0.0656 moles O₂ * (2 mol Mg / 1mol O₂) = 0.132 moles Mg

As there are 0.1563 moles of Mg, Mg is the excess reactant and O₂ the limiting reactant.

0.0656 moles O₂ produce:

0.0656 moles O₂ * (2 mol MgO / 1mol O₂) = 0.132 moles MgO

The mass is -Molar mass MgO: 40.3g/mol-:

0.132 moles MgO * (40.3g / mol) =

5.3g of MgO would be produced

Answer:

c

Explanation:

because electricity has a good conduct tha is mental

Answer:

Explanation:

After various studies and experiments conducted on Pluto's moon, Charon it has been determined that it gets to minus 459.67 degrees Fahrenheit which would be equivalent to minus 273.15 degrees Celsius. This is the coldest temperature that scientists have registered for Charon. This temperature is nearing absolute zero and puts it colder than Pluto itself since Pluto's temperature is believed to get to minus 400 degrees Fahrenheit which is equivalent to minus 240 degrees Celcius.

Answer:

C. Remains constant

Explanation:

Hope this helps (:

True. i hope its correct, have a good day. stay happy and stay safe

Answer:

A:true

Explanation:

The number of protons, neutrons, and electrons in an atom can be determined from a set of simple rules.

Aerospace

Thermoset composites are being specified for wings, fuselages, bulkheads, and other applications in commercial, civilian and military aerospace applications.

Appliance/Business

Thermoset composite are being used in frames, equipment panels, handles and trims in appliances, power tools, business equipment and many other applications.

Thermoset composites for the appliance industry are used in washers, dryers, refrigerators, freezers, ranges, ovens, dishwashers for components that include control panels, handles, knobs, vent trims, side trims, motor housings, kick plates and many others.

Automotive/Transportation/Farm/Construction

Composites are now being used in vehicle and equipment applications, including, panels, frames, interior components and other parts.

Civil Infrastructure

Some composite infrastructure applications include buildings, roads, bridges and pilings.

Construction

Thermoset composites are replacing many traditional materials for home and offices architectural components including fixtures, doors, wall panels, roofing, window frames, moulding, vanity sinks, shower stalls and even swimming pools.

Corrosive Environments

Composites are ideal for applications in corrosive environments, such as chemical processing plants, pulp and paper converting, oil and gas refineries and water treatment facilities.  Common applications include fans, grating, tanks, ducts, hoods, pumps and cabinets.

Electrical

With strong dielectric properties including arc and track resistance, Thermoset components include substation equipment, microwave antennas, standoffs and pole line hardware and printed wiring boards. Applications and components include switchgear,  motor controls,  standoff insulators, control system components,  circuit breakers,  arc chutes, arc shields, terminal blocks,  terminal boards,  metering devices,  bus supports and lighting components.

Marine

With their corrosion resistance and light-weighting attributes, Marine composite applications include boat hulls, bulkheads and other components for military, commercial and recreational boats and ships.

Answer:

Volume = 72.7272

Explanation:

if only pressure and volume change, then we can do some simple math to find the answer.

2 x 10 ^ 6 times 1 x 10 ^-5 = 20

pressure and volume must equal 20

20 = 0.275 x volume

20 / 0.275 = new volume

I don't remember significant digits but your volume is 72.72727272 just repeated

If we have a 1.0 x 10 -5 liter sample of a gas at that pressure, then release the pressure until it is equal to 0.275 atm, the new volume will be 72.7272

Volume is the space occupied by a three-dimensional object.

By the Boyle's law

[tex]\rm P_1V_2= P_1V_2[/tex]

P1 (initial pressure) = [tex]2.0 \times10^6 atm[/tex]

V1 (initial volume) = [tex]1.0 \times10^-5 L[/tex]

P2 (final pressure) = 0.275 atm

V2 (final volume) = ? (in L)

Putting the values in the equation

[tex]\rm 2.0 \times10^6 atm \times 1.0 \times10^-5 L = 0.275 atm \times V_2\\\\V_2 = \dfrac{20}{0.275} = 72.72 L[/tex]

Thus, the volume is 72.72 L.

Learn more about  Boyle's law

https://brainly.com/question/1437490

#SPJ2

Answer:

Imagine Dragon

Explanation:

These balls across yo face

Gottem

Answer:

Rubidium

Explanation:

Add the exponents: 2+2+6+2+6+2+10+6+1=37

Look for the atomic number 37

The element having electronic configuration 1s₂, 2s₂, 2p₆, 3s₂, 3p₆, 4s₂, 3d₁₀, 4p₆, 5s₁ is rubidium .

A chemical element is a species of atoms, including the pure substance made entirely of that species, that have a specific number of protons in their nuclei. Chemical elements, in contrast to chemical compounds, cannot be reduced by any chemical process into simpler molecules.

They can be identified by their particular atomic number. The periodic table groups the elements according to their atomic number and draws attention to those with related qualities.

The most vital ingredient for life is carbon. Life as we know it would not exist without this element. You'll see that carbon is the main component of the chemicals required for life.

Thus, The element having electronic configuration 1s₂, 2s₂, 2p₆, 3s₂, 3p₆, 4s₂, 3d₁₀, 4p₆, 5s₁ is rubidium .

To learn more about an element, follow the link;

https://brainly.com/question/13025901

#SPJ2

Answer:

Karenia brevis produces toxins called brevetoxins that affect a variety of marine wildlife. Aquatic organisms can be exposed to brevetoxins in several ways: coming into contact with K. brevis cells or toxins in the water, ingesting cells, inhaling toxins and consuming toxic prey.

Explanation:

Answer:

Increasing its temperature.

Longer

and thinner

Explanation:

e2021

The resistance of a wire increases by increasing its temperature, using a longer wire and using a thinner wire.

The resistivity of wire describes the opposition to the flow of current in the wire.

[tex]R = \frac{\rho L}{A} \\\\\rho = \frac{RA}{L} \ (ohm-meter)[/tex]

where;

From the formula above, the resistance of a wire increases with

Learn more about resistance of a wire here: https://brainly.com/question/469388

Answer:

See explanation below

Explanation:

At first sight, it seems that the innitial pressure of 100,00 N would be 100,00 N/m² because pressure does not have units of newton alone. If this is true, then the calculations are the following (If it's not, but it's actually mm Hg, then skip the part of the conversion, and just do the procedure of solving for the volume).

The innitial pressure is 100 N/m² or simply 100 Pa. As the second pressure is in mm Hg, let's convert the Pascal units to mm Hg:

1 Pa -----> 0.007501 mm Hg

100 ---------> X

X = 100 * 0.007501 / 1 = 0.7501 mmHg

Now that we have the innitial pressure in mm Hg, and the temperature remains constant, we use the Boyle's law to solve for this:

P₁V₁ = P₂V₂

V₂ = P₁V₁ / P₂  

Using this expression, let's solve for V₂:

V₂ = 0.7501 *¨500 / 150

V₂ = 2.5 cm³

Now, it's the innitial pressure is 100 mm Hg then the volume:

V₂ = 100 * 500 / 150

V₂ = 333.33 cm³

Check the units of the innitial pressure, one of these results should be the correct answer. If it's not, then please post again the question with the correct units.

Hope this helps

Answer:

Gases

Explanation:

The particals will move around rapidly in all directions.

Answer:

29.5 days

Explanation:

its 29.5 days i hope it helps

Answer:

The Moon takes 27.3 days to orbit Earth, but the lunar phase cycle (from new Moon to new Moon) is 29.5 day

The question is incomplete, the complete question is;

Choose the aqueous solution that has the highest boiling point. These are all solutions of nonvolatile solutes and you should assume ideal van't Hoff factors where applicable. 0.100 m C6H12O6 0.100 m AlCl3 0.100 m NaCl 0.100 m MgCl2 They all have the same boiling point.

Answer:

AlCl3 0.100 m

Explanation:

Let us remember that the boiling point elevation is given by;

ΔTb = Kb m i

Where;

ΔTb = boiling point elevation

Kb = boiling point constant

m = molality of the solution

i = Van't Hoff factor

We can see from the question that all the solutions possess the same molality, ΔTb now depends on the value of the Van't Hoff factor which in turn depends on the number of particles in solution.

AlCl3 yields four particles in solution, hence ΔTb is highest for AlCl3 . The solution having the highest value of ΔTb also has the highest boiling point.

Answer:

315.51g/mol

Explanation:

137(33 + (16.00 + 1.01) 2 + 8 [1.01 (2) + 16.00] = 315.51g/mol

Answer:

D) 100*C

Explanation:

Answer:

A. 0°C

Explanation:

El agua se evapora a los 0 grados