A large bottle contains number medical tablets each having a mass of 250
mg.The mass of all tablets is 1kg.Calculate the number of tablets in the
bottle.​

Answers

Answer 1

First of all, this isn't physics. But, here's the answer:

1 gram is a 1000 milligram and 250 milligram is 250 * 0.001 g which is 0.25 gram.

Since 1 kg is 1000 g, we divide 1000 by 0.25 and we get 1000 * 4 which is 4000.

There are [tex]4000[/tex] tablets inside the bottle.


Related Questions

Bob roller skates with a constant speed of 6 mi/hr. How long will it take him to travel 6 mi.? t=d/s

Answers

Answer:

1 hour

Explanation:

t = 6/6

6/6 = 1

You just said that his speed enables him to cover 6 miles in each hour. From this information, I calculated that it will take him one hour to travel 6 miles.

Identify the charges that are negative.
A B C D​

Answers

B is the answer arc coding to the code of the book is school

Answer:

b and c

Explanation:

Repeat the demonstration on a paved surface such as a driveway or sidewalk and document the differences. With no soil to absorb this water, what would happen in a heavy rainstorm? How would an engineer in charge of a city’s flood control system prepare for the runoff generated on paved parking lots and roads in a heavy rainstorm?

Answers

Answer:

can I see like the actual activity on a computer or book?

Jeffrey is using a pulley to get water from a well. He loops a rope over the top of a pulley wheel, then ties the rope to a bucket. He lowers the bucket into the water. To bring the bucket and water up from the well, Jeffrey pulls down on his end of the rope. Why does Jeffrey apply a pulling force to the rope? A. because adding his force to the force generated by the pulley will get the job done faster B. to test the tension in the rope before he uses it to climb down into the well C. to signal to the pulley to start drawing water from the well D. because work must be done on the pulley before it can do work on the bucket​

Answers

Answer:

D

Explanation:

PLZZ HELP

How many kg are there in 335 m

Answers

Kg are weight, m are length lol soooooo

Just before it landed on the moon, the Apollo 12 lunar lander had a mass of 1.4×104 kg. What rocket thrust was necessary to have the lander touch down with zero acceleration?

Answers

Answer:

[tex]\mathbf{F_{thrust} \simeq 2.3 \times 10^4 \ N}[/tex]

Explanation:

For a lunar lander acceleration in an upward direction, the net force that acts on it can be expressed as:

[tex]F_{net} = F_{thrust} - F_{g(moon)}[/tex]

The equation for the net force that acts on the lunar lander is:

[tex]F_{net} = m_La[/tex]

For the lander touch down to be zero acceleration, it implies that the acceleration of the moving rocket is zero(a free body fall)

i.e. a = 0

We can now regard the Apollo 12 lunar as a freely falling body

However; the force of gravity as a result of the moon acting on the lunar rocket is:

[tex]F_{g(moon)} = m_Lg_m[/tex]

Then; the equation for the thrust force of the lunar rocket is:

[tex]F_{net} = F_{thrust} - F_{g(moon)}[/tex]

[tex]m_La = F_{thrust}-m_Lg_m[/tex]

[tex]m_L(0)= F_{thrust}-m_Lg_m[/tex]

[tex]0= F_{thrust}-m_Lg_m[/tex]

[tex]-F_{thrust}= -m_Lg_m[/tex]

[tex]F_{thrust}= m_Lg_m[/tex]

Finally; the thrust force of the lunar rocket can be determined as:

[tex]F_{thrust}= m_Lg_m[/tex]

Acceleration due to gravity ot the surface of the moon = 1.625 m/s²

[tex]F_{thrust}=(1.4 \times 10^{4} \ kg) (1.625 \ m/s^2)[/tex]

[tex]F_{thrust}=2.275 \times 10^4 \ N[/tex]

[tex]\mathbf{F_{thrust} \simeq 2.3 \times 10^4 \ N}[/tex]

A thrust force of 22680N will be necessary to  to have the lander touch down with zero acceleration.

Given the data in the question;

Mass of Apollo 12 lunar lander; [tex]m_L = 1.4 * 10^4 kg[/tex]

Using the expression for the net-force that acts on the lander when it is accelerated in the upward direction:

[tex]F_{net} = F_{thrust} - F_{g(moon)}[/tex] ------- Let this be equation 1

Also, the net-force that acts on the lunar lander can be expressed as:

[tex]F_{net} = m_L*a[/tex] ------- Let this be equation 2

Where [tex]m_L[/tex] is the mass of the lunar lander and a is the acceleration ( 0 ),

( the acceleration of the moving rocket is zero and its freely falling )

Also, Force of gravity due to moon that acts on the lunar lander is expressed as:

[tex]F_{g(moon)} = m_L * g_m[/tex]  ------- Let this be equation 3

Where [tex]m_L[/tex] is the mass of the lunar lander and [tex]g_m[/tex] is the moon's gravity ( [tex]1.62m/s^2[/tex] )

Lets substitute equation 2 and 3 into 1

[tex]m_L * a = F_{thrust} - (m_L * g_m)\\\\m_L * 0= F_{thrust} - (m_L * g_m)\\\\0=F_{thrust} - (m_L * g_m)\\\\ F_{thrust} = m_L * g_m[/tex]

We substitute our values into the equation

[tex]F_{thrust} = (1.4*10^4kg) * 1.62m/s^2\\\\F_{thrust} = 22680 kg.m/s^2\\\\F_{thrust} = 22680N[/tex]

Therefore, a thrust force of 22680N will be necessary to  to have the lander touch down with zero acceleration.

Learn more: https://brainly.com/question/7602665

A mother and daughter press their hands together and then push apart while ice skating. Immediately after they push away from each other, how does the motion of the mother and daughter change? ​

Answers

Answer:

J

Explanation:

The daughter moves with greater acceleration backwards because of her weight.

Both mother and daughter move backward, but the daughter moves with greater acceleration. Therefore, option (J) is correct.

What is Newton's second law of motion?

This law states that the acceleration of a body depends on two factors. The first one is the mass of the body and the net force acting on the body. The acceleration is inversely proportional to the mass and is directly proportional to the net force acting on the body and

Newton’s second law can be written in an expression as follows:

F = ma

or,   a = F/m

According to Newton's third law of motion, there is an equal and opposite reaction for every action. So when the two skaters push each other. They both will move in a backward direction.

But the mass of the daughter is 50 Kg while the mass of the mother is 100 Kg. As the mass of the daughter is less. Therefore daughter moves in a backward direction with greater acceleration.

Therefore, both move backward but the daughter moves with greater acceleration in comparison to the mother.

Learn more about Newton's second law of motion, here:

brainly.com/question/13447525

#SPJ2

Describe which relationships in Ohm’s law are DIRECT and which are INVERSE. Use examples to support your answer. You can use calculations, drawings, or graphs to make your point more clear

Answers

Answer:

I like to memorize excerpt from articles to solve and answer questions like these. I hope this can help, it's from study.com: "The relationship between voltage, current, and resistance is described by Ohm's law. This equation, i = v/r, tells us that the current, i, flowing through a circuit is directly proportional to the voltage, v, and inversely proportional to the resistance, r."

Your friend clams that objects do not have to be thouching for a magnetic force to cause motion. How would you support your friends claim? Due today

Answers

Yes because something that has been electrically charged can make other things move without touching them ( this is called force without contact)
Hoped this helped :)

please help
A toy rocket having a mass of 10 kg and weighing 100 N provides an applied upward thrust force of 400 N. What is the upward acceleration of the rocket? Fair = 400N Fw = 100N 5 m/s2 50 m/s2 40 m/s2 4 m/s² 30 m/s2 3 m/s2​

Answers

We are given:

Mass of the rocket = 10 kg

Weight of the Rocket = 100 N

Upward thrust applied by the rocket = 400 N

Net upward force on the rocket:

We are given that gravity pulls the rocket with a force of 100 N

Also, the rocket applied a force of 400N against gravity

Net upward force = Upward thrust - Force applied by gravity

Net upward force = 400 - 100

Net upward force = 300 N

Upward Acceleration of the Rocket:

From newton's second law:

F = ma

replacing the variables

300 = 10 * a

a = 30 m/s²

A motor lifts a 500kg elevator a height of 100 m at a constant speed in 50 secs. How much power did the motor supply

Answers

Answer:

9,800 watts

Explanation:

The first step is to calculate the force

F= mg

= 500 × 9.8

= 4,900 N

The next step is to calculate the work done

= 4,900 × 100

= 490,000 joules

Therefore the power can be calculated as follows

Power= work done /time

= 490,000/50

= 9,800 watts

a 15-n force and a 45-n force act on an object in opposite directions. what is the magnitude of the net force on the object?

Answers

Answer: 30 N (in the direction of the 45 N force)

Explanation:

You have to choose a positive and negative direction since the question says the forces are in opposite directions.

Lets assume:

- <----------> +

<------ 15 N

45 ------->

45-15=30

Taranga lifts 400N load using first class lever. if Taranga applies effort of 100N at 30 cm from the fulcrum what should be the load distance to balance it?​

Answers

Answer:

d = 7.5 [cm]

Explanation:

To be able to solve this problem we must understand well the concept of a simple lever of First Class, which consists of a support point (fulcrum) and a beam where a force is applied at one end, while at the other end the force exerted is multiplied.

In the attached image we can see an image that will help us better understand the concept of this first-class lever.

The moment created by the effort and the distance is equal to:

M = 100*30 = 3000 [N*cm]

Now the balance is created because we have the same moment exerted by the effort and the one created by the load.

3000 = 400*d

d = 7.5 [cm]

The metric unit of power is _____.

Answers

Answer:

Watt

Explanation:

Power is defined as the work done by an object per unit time. Its mathematical form is given by :

[tex]P=\dfrac{W}{t}[/tex]

The SI unit of work done is Joules (J) and that of time is seconds (s).

J/s is equal to watts. Watt is the metric unit of power.

A weight lifter lifts a 280-N set of weights from ground level to a position over his head, a vertical distance of 1.60 m. How much work does the weight lifter do, assuming he moves the weights at constant speed?

Answers

Given :

A weight lifter lifts a 280-N set of weights from ground level to a position over his head, a vertical distance of 1.60 m.

To Find :

How much work does the weight lifter do, assuming he moves the weights at constant speed.

Solution :

We know, work done is given by :

[tex]W= Fdcos\ \theta[/tex]

Here, F = 280 N and d = 1.60 m

Since, weight lifer is applying and upward force and displacement is also in upward direction.

[tex]\theta = 0^{\circ}\\cos\ 0^{\circ} = 1[/tex]

Putting all these in above equation, we get :

[tex]W = 280\times 1.6\times 1\\\\W = 448\ J[/tex]

Therefore, work done by weight lifter 448 J.

Hence, this is the required solution.

A 30 kg box is being pulled with a force of 125 N. The coefficient of static friction between the box and the floor is 0.35. What is the minimum downward force on the box that will keep it from slipping?

Answers

Answer:

The minimum downward force on the box that will keep it from slipping is 63.14 N

Explanation:

Given;

mass of the object, m = 30 kg

applied force, f = 125 N

coefficient of static friction, μ = 0.35

Normal reaction (R) is acting upwards, weight of the box (mg) is acting downwards and the minimum downward force (F) on the box that will keep it from slipping is also acting downwards.

The net vertical forces on the box is given by;

R - mg - F = 0

F = R - mg

Now, determine normal reaction, R

f = μR

R = f / μ

R = 125 / 0.35

R = 357.14 N

Finally, determine the minimum downward force on the box that will keep it from slipping;

F = R - mg

F = 357.14 - (30 x 9.8)

F = 357.14 - 294

F = 63.14 N

Therefore, the minimum downward force on the box that will keep it from slipping is 63.14 N

Equilibrium can occur only if

Answers

Answer:

Equilibrium is when the rate of the forward reaction equals the rate of the reverse reaction. All reactant and product concentrations are constant at equilibrium.

Explanation:

You apply 741 J of energy to lift a box a distance of 2.83 meters, what
is the weight of the box?

Answers

Answer:

261.84 N.

Explanation:

From the question given above, the following data were obtained:

Energy (E) = work (W) = 741 J

Distance (d) = 2.83 m

Force (F) =?

Work is simply defined as the product of force and the distance moved in the direction of the the force. Mathematically, it is expressed as:

Work (W) = Force (F) × distance (d)

W = F × d

Thus, we obtained the weight of the object using the above formula.

Work (W) = 741 J

Distance (d) = 2.83 m

Force (F) =?

W = F × d

741 = F × 2.83

Divide both side by 2.83

F = 741 / 2.83

F = 261.84 N

Since force and weight has the same unit of measurement i.e Newton (N), the weight of the object is 261.84 N

A 200 – g object is tied to the end of a cord and it is turning in horizontal circle of radius 1.20 Cm at the constant 3 rev/sec. Calculate the centripetal acceleration of the object.

Answers

At angular speed of 3 rev/s, the object moves a distance equal to 3 times the circumference of the circle each second, or a distance of 3 • 2π (1.20 cm) ≈ 22.6 cm.

So, with a linear speed of 22.6 cm/s = 0.226 m/s, the object has a centripetal acceleration a of

a = (0.226 m/s)² / (0.012 m) ≈ 18.8 m/s²

directed toward the center of the circle.

The girl climbs the ladder with the painting in 5 seconds. How much work does
she perform? How much power does she use? *

Answers

There is missing data such the mass and the height.
But anyway.
Work = Force x distance
Power = work / time

Can the brain perform two separate tasks at the same time
yes or no​

Answers

Answer:

yes

Explanation:

the brain perform two separate tasks at the same time

Fast and safe heart rate for workouts is called muscular strength? True or false

Answers

Answer:

False

Explanation:

Answer:

False

Explanation:

Hope this helped, Have a Wonderful Day/Night!!

how do I find the x and y components and the resultant force?​

Answers

Explanation:

1) the diagonal force times the sine of the angle it makes will give you the vertical component or y component . use this to get the vertical components of all the diagonal forces . add all the vertical components as well as the vertical forces together

2) the diagonal force times the cosine of the angle it makes gives the horizontal component or x component. do this to get the x component of all the diagonal forces.

add all the x components as well as the horizontal forces together to get the final x component

3)using the triangle of vectors, the resultant force is calculated

sum of y component = 3.2N

sum of x component= 5.7N

resultant force = 6.5N

Who determined how stars are powered?

Answers

Answer:

NEWTON

Explanation:

ISSAC NEWTON

HOPE IT HELP U

Answer:

hans bethe

Explanation:

Hans Bethe

In 1939, in a paper entitled "Energy Production in Stars", Hans Bethe analyzed the different possibilities for reactions by which hydrogen is fused into helium. He defined two processes that he believed to be the sources of energy in stars.

i looked it up and thats what it said

2. Heather and Matthew walk with an average velocity of +0.87 m/s eastward.
If it takes them 27 minutes to walk to the store, what is their
displacement? (include direction)
(5 points)

Answers

The answer is 27 minuets

A tuning fork vibrates at 15,660 oscillations every minute. What is the period (in seconds) of one back and forth vibration of the tuning fork?

Answers

We are given:

The tuning fork vibrates at 15660 oscillations per minute

Period of one back-and forth movement:

the given data can be rewritten as:

1 minute / 15660 oscillations

60 seconds / 15660 oscillations          (1 minute  = 60 seconds)

dividing the values

0.0038 seconds / Oscillation

Therefore, one back and forth vibration takes 0.0038 seconds

A diffuser is an adiabatic device that decreases the kinetic energy of the fluid by slowing it down. What happens to this lost kinetic energy?

Answers

Answer:

Kinetic energy is converted to internal energy

Explanation:

We are required to explain what happens to this decreased kinetic energy in this question.

Here is what a diffuser does, this device increases the pressure of a fluid and in so doing it slows it down. The lost kinetic energy would then be converted to internal energy. This is the correct answer to the question.

Thank you

Everything in the Universe originated from a single point. How was it possible for everything in the Universe to have occupied a
single point?
OA. Only protons and electrons existed in the Universe, and they were pulled together by gravity.
OB. Only single atoms existed in the Universe, and they were squeezed together by magnetic fields.
OC.
All mass in the Universe was in the form of gases, and gases take up minimal space.
OD
All mass in the Universe was once energy, and energy does not take up space.

Answers

It’s b because atoms came before protons and electrons

Answer:

d

Explanation:

A balloon was filled to a volume of 2.50 LL when the temperature was 30.0∘C30.0∘C. What would the volume become if the temperature dropped to 11.0∘C11.0∘C.

Answers

Answer:

The volume would become 2.34 L if the temperature dropped to 11.0 °C

Explanation:

From the question, A balloon was filled to a volume of 2.50 L when the temperature was 30.0 °C.

To determine what the volume will become if the temperature dropped to 11.0 °C, we will use one of the Gas laws that relates Volume and Temperature. The Gas law that relates Volume and Temperature is the Charlse' law which states that, "the Volume of a fixed mass of gas is directly proportional to its Temperature ( in Kelvin) provided that the Pressure remains constant"

That is

V ∝ T ( at constant pressure)

Where V is the Volume

and T is the Temperature in Kelvin

Then, we can write that

V = kT

Where k is the constant of proportionality

Then,

[tex]\frac{V}{T} = k[/tex]

Hence, we can write that

[tex]\frac{V_{1} }{T_{1} } = \frac{V_{2} }{T_{2} } = \frac{V_{3} }{T_{3} } ...[/tex]

∴ [tex]\frac{V_{1} }{T_{1} } = \frac{V_{2} }{T_{2} }[/tex]

Where [tex]{V_{1} }[/tex] is the initial volume

[tex]{T_{1} }[/tex] is the initial temperature

[tex]{V_{2} }[/tex] is the final volume

and [tex]{T_{2} }[/tex] is the final temperature

From the question,

[tex]{V_{1} }[/tex] = 2.50 L

[tex]{T_{1} }[/tex] = 30.0 °C = 30.0 + 273.15 K = 303.15 K

[tex]{V_{2} }[/tex] = ??

[tex]{T_{2} }[/tex] = 11.0 °C = 11.0 + 273.15 K = 284.15 K

Putting the values into the equation, we get

[tex]\frac{2.50}{303.15} = \frac{V_{2} }{284.15}[/tex]

∴ [tex]V_{2} = \frac{2.50 \times 284.15}{303.15}[/tex]

[tex]V_{2} = 2.34 L[/tex]

Hence, the volume would become 2.34 L if the temperature dropped to 11.0 °C.

The final volume of the balloon is equal to 0.92 Liter.

Given the following data:

Initial volume = 2.50 LInitial temperature = 30°CFinal temperature = 11°C

To determine the final volume of the balloon, we would apply Charles's law:

Mathematically, Charles law is given by the formula;

[tex]\frac{V}{T} =k\\\\\frac{V_1}{T_1} = \frac{V_2}{T_2}[/tex]

Where;

T is the temperature of an ideal gas.V is the volume of an ideal gas.

Substituting the given parameters into the formula, we have;

[tex]\frac{2.5}{30} = \frac{V_2}{11} \\\\2.5 \times 11 = 30V_2\\\\27.5 = 30V_2\\\\V_2 = \frac{27.5}{30}[/tex]

Final volume = 0.92 Liter.

Read more: https://brainly.com/question/22971882

A 4.80 g bullet moves with a speed of 170 m/s perpendicular to the Earth's magnetic field of 5.00×10−5T.

Part A
If the bullet possesses a net charge of 1.06×10−8 C , by what distance will it be deflected from its path due to the Earth's magnetic field after it has traveled 1.00 km ?

Answers

Answer:

[tex]3.24\times 10^{-7}\ \text{m}[/tex]

Explanation:

m = Mass of bullet = 4.8 g

v = Velocity of bullet = 170 m/s

B = Magnetic field of Earth = [tex]5\times 10^{-5}\ \text{T}[/tex]

q = Charge of bullet = [tex]1.06\times 10^{-8}\ \text{C}[/tex]

a = Acceleration

Time the bullet will be in the air for is [tex]t=\dfrac{1000}{170}=5.88\ \text{s}[/tex]

Force is given by

[tex]F=ma[/tex]

Magnetic force is given by

[tex]F=qvB[/tex]

So

[tex]ma=qvB\\\Rightarrow a=\dfrac{qvB}{m}\\\Rightarrow a=\dfrac{1.06\times 10^{-8}\times 170\times 5\times 10^{-5}}{4.8\times 10^{-3}}\ \text{m/s}^2[/tex]

From the linear equations of motion we have

[tex]s=ut+\dfrac{1}{2}at^2\\\Rightarrow s=0+\dfrac{1}{2}\times \dfrac{1.06\times 10^{-8}\times 170\times 5\times 10^{-5}}{4.8\times 10^{-3}}\times 5.88^2\\\Rightarrow s=3.24\times 10^{-7}\ \text{m}[/tex]

The defelection of the bullet is [tex]3.24\times 10^{-7}\ \text{m}[/tex]

Other Questions
9. Information about the first European ships that sailed the upper Atlantic coastwould best fit in which section of the article?A. "Thriving Communities"B. "Tisquantum the Survivor"C. "Saving the Settlers"D. "Swarms of Settlers Arrive" factorise the following:[tex]{3x}^{2} + 5x - 12[/tex] help asap plspls !! :) Which is the graph of the line y 2 = 3(x 1)? what are all the middle Colonies. In animal farm novel. Name a suitable title for each chapter. They are 10 chapters How many moles are in 1.00x1025 Ni2+ ions? Which inequality does this graph represent?O-10-1 < xOx=-1Oxs-1 Would you ratherbuy...Option A8 pound jug of icecream for$24.56Option BTwo 3 pound 11 ouncejugs of ice cream for$23.60or... what is the oppisite of 38.7 its a math Five Illness that may result from stress include a heart attack, high blood pressure, migraine headaches, ulcer, and colitis. True Or False What is the purpose of the story "Clever Gretel"?to give an accurate lesson about historyto teach a lesson about human behaviorto explain an idea rather than entertainto show what the future might be like Natalie reads for 68 hour on 6 days each week.How many hours does Natalie read each week?Enter your answer by filling in the boxes. On the scale model, the distance between the wheels on the left and the wheels on the right is inches. The state of Wyoming has old railroad tracks that are 4.5 feet apart. Can the modern train travel on those tracks? Help pls for I will give u brainlest Read through the paragraph on personal protective equipment on page 2 and fill in the blanks using the list of words below. Each word is used only once.SewersEar defendersReplacesDropHazardsDust maskHandsEmployerSafety boots85dbProtectFalling objectsTreadHelmetGauntletsResponsibilityNoisePPEI have just started a new job, and it is the responsibility of my ____________________ to supply the correct PPE for me to wear. PPE is designed to ___________________ me against workplace _____________________ . When we go on site I need good strong ______________ _____________________ to protect my feet from things like dampness, in case I ____________ something on my foot and also in case I _____________________ on an up-turned nail. My boss always asks me to use safety gloves to protect my ______________________. In fact, once I had to wear arm-length ____________________ when we were working on some _______________ |On site I also have to wear a safety ____________________ all the time. This is a good thing because it protects my head from any ___________________ ________________________. Working with other trades, such the carpenters, can be hazardous because they make lots of ______________________ with their power tools. If the noise is above ____________________ we have to use ______________ ______________________, otherwise my hearing could be damaged. Because of all the sawdust they create when they are cutting wood, they regularly have to wear a _____________ ___________________, which stops them breathing in the dust.I have to look after all the ______________________ my boss gives me, as it is my ______________________. If something gets broken, he _______________________ it for me as he does not want to get in to trouble with the HSE. A hammer has an input distance of 9 cm and an output distance of 3 cm. What is its idealmechanical advantage? Please helpppp! 10 points What is the answerd3/ 1 4 /1 =? What knives and hand tools should Alex carry with him as an entry-level cook?