Bob has saved $600 each month for the last 3 years
to make a down payment on a house. The account
earned an interest rate of 0.50 percent per month.
How much money is in Bob's account?

Answers

Answer 1

Answer:

300

Step-by-step explanation:


Related Questions

Write the equation of a line that is perpendicular and passes through the midpoint of AB with A(-3, 5) and B(1, -1).

Answers

The given line AB is having endpoints A(-3,5) & B(1,-1).

To find the equation of line AB it can be written as[tex]y-y_1=(x-x_1){(y_2-y_1)/(x_2-x_1)}\\[/tex]

Substituting the given points

[tex]y-(-1)=(x-1){(5-(-1))/(-3-1)}\\[/tex]

y=-(3/2)x+1/2

For two perpendicular lines [tex]m_1*m_2=-1[/tex]

Therefore, (-3/2)*[tex]m_2[/tex]=-1

or [tex]m_2[/tex] = 2/3

Also, the midpoint of AB will be [tex]{1-(-3)}/2, {5-(-1)}/2[/tex] = (2,3).

The line passing through (2,3) & perpendicular to y=-3/2x+1/2 will be given as follows

(y-3)=(2/3)(x-2)

3y-9=2x-4

3y=2x+5 is the required equation of the line.

#SPJ1

How many triangles exist with the given side lengths?

3in , 4in , 2in

Answers

Step-by-step explanation:

Only ONE .....there are three sides to a triangle and you supplied 3 sides.

Answer:
Many triangles

Explanation: When you add the smallest sides together, for example 2+3 you get 5, therefore 5 is bigger than 4; this would leave you with many triangles

Question is in the image. Please help me solve these

Answers

Answer:

Step-by-step explanation:

if you increase your current quality score of 85% by 7%, you will have a score of?

Answers

Answer:

90.95%

Step-by-step explanation:

85 * 0.07 = 5.95 5.95 + 85= 90.95

Answer:

The answer to your problem is, 90.95%

Step-by-step explanation:

Calculation:

In order to find the answer we need to

= Old score + New Score

= 85 + 7% of 85

= 85 + ( [tex]\frac{7}{100}[/tex] x 85 )

= 85 + ( 0.07 x 85 )

= 85 + 5.95

= 90.95

Which 90.95% is our answer.

Thus the answer to your problem is, 90.95%

PLEASE ANSWER FAST!!!! NEED TO UNDERSTAND!!!

Answers

Step-by-step explanation:

X component  = 4.5 - 2.1  =   2.4

Y component  = 7.8 - 2.1  =    5.7

Find magnitude using Pythagorean theorem

  m^2 = 2.4^2 + 5.7^2

    magnitude  = 6.18    units

Remember for a right triangle   tangent Φ = opposite leg / adjacent leg

    angle = arctan ( 5.7 / 2.4 )   = 67.2 degrees

Baristas at Hot Cocoa Coffee Shop tested their new hot chocolate machine. The following table shows the number of seconds the machine was turned on and the amount of hot chocolate that filled up the cup. Time (seconds) 4 8 12 16 20 24 Hot Chocolate Amount (fluid ounces) 5 7.5 9 11 13 16 Which representation is most appropriate for displaying and describing what is happening to the amount of hot chocolate over time? scatter plot titled New Machine with the x axis labeled hot chocolate amount in fluid ounces going from 0 to 18 and the y axis labeled time in seconds going from 0 to 26, with points at 5 comma 4, 7 and a half comma 8, 9 comma 12, 11 comma 16, 13 comma 20, and 16 comma 24 line graph titled New Machine with the x axis labeled hot chocolate amount in fluid ounces going from 0 to 18 and the y axis labeled time in seconds going from 0 to 26, with points at 5 comma 4, 7 and a half comma 8, 9 comma 12, 11 comma 16, 13 comma 20, and 16 comma 24, with line segments connecting each point to the next scatter plot titled New Machine with the x axis labeled time in seconds going from 0 to 28 and the y axis labeled hot chocolate amount in fluid ounces going from 0 to 18, with points at 4 comma 5 and 8 comma 7 and a half and 12 comma 9 and 16 comma 11 and 20 comma 13 and 24 comma 16 line graph titled New Machine with the x axis labeled time in seconds going from 0 to 28 and the y axis labeled hot chocolate amount in fluid ounces going from 0 to 18, with points at 4 comma 5 and 8 comma 7 and a half and 12 comma 9 and 16 comma 11 and 20 comma 13 and 24 comma 16, with line segments connecting each point to the next

Answers

The most appropriate representation for displaying and describing what is happening to the amount of hot chocolate over time is a scatter plot titled New Machine.

Which representation is most appropriate for displaying and describing what is happening to the amount of hot chocolate over time?

The most appropriate representation for displaying and describing what is happening to the amount of hot chocolate over time is a scatter plot titled New Machine with the x-axis labeled time in seconds going from 0 to 28 and the y-axis labeled hot chocolate amount in fluid ounces going from 0 to 18, with points at 4 comma 5 and 8 comma 7 and a half and 12 comma 9 and 16 comma 11 and 20 comma 13 and 24 comma 16.

A scatter plot is a useful way to show the relationship between two variables, in this case, the amount of hot chocolate and time. Each point on the scatter plot represents a pair of values for time and hot chocolate amount. A line graph with line segments connecting each point to the next would not be appropriate because the data is not continuous, and there is no reason to assume that the relationship between time and hot chocolate amount is linear.

Learn more about representation in: https://brainly.com/question/15006951

#SPJ1

Suppose that the function g is defined, for all real numbers, as follows.

Answers

The graph of the piecewise function is given by the image presented at the end of the answer.

What is a piece-wise function?

A piece-wise function is a function that has different definitions, depending on the input of the function.

All the three definitions of the function in this problem are constant, hence the graph will be composed by horizontal lines.

The definitions are given as follows:

y = 2 to the left of x = 0.y = -1 at x = 0.y = -3 to the right of x = 0.

More can be learned about piece-wise functions at brainly.com/question/19358926

#SPJ1

34 Points! Multiple choice algebra question. Photo attached. Solve e^x>2.7. Thank you!

Answers

Answer:

B

Step-by-step explanation:

not good at explaining this concept but keep the signal its X|X and its near the square root so tadaaa

In a lottery game, a player picks six numbers from 1 to 22. If the player matches all six numbers, they win 40,000 dollars. Otherwise, they lose $1.

Answers

To find the probability of winning the lottery game, we can use the formula for combinations:

nCk = n! / (k! * (n - k)!)

where n is the total number of choices (22 in this case) and k is the number of choices we make (6 in this case).

So, the number of possible combinations of six numbers from 22 is:

22C6 = 22! / (6! * 16!) = 13,983,816

Therefore, the probability of winning the lottery game is 1 in 13,983,816.

The expected value of playing the lottery game can be calculated as follows:

Expected value = (Probability of winning * Amount won) - (Probability of losing * Amount lost)

Expected value = (1/13,983,816 * $40,000) - (13,983,815/13,983,816 * $1)

Expected value = $0.5709

This means that on average, the player can expect to win about 57 cents per game played. However, it is important to note that this is just an average and the actual outcome of any single game can vary widely.

Your friend has a bag of yellow and purple candy. He wants to use them to play a game with you.

Purple is worth 2 points and yellow is worth three points. Pick 9 candies from the bag

Create a system of equations where the combination of the candies gives you a total of 22 points. Make sure you label and define your variables.

Answers

The system of equations where the combination of the candies gives you a total of 22 points are:

x + y = 9

2x + 3y = 22

How can we create system of equations?

To create the equations, we shall first define the variables:

x = the number of purple candies

y = the number of yellow candies

Next, we shall use the given information that purple candies are worth 2 points and yellow candies are worth 3 points.

Then, we would make sure that the total number of candies selected is 9.

The first equation represents the total number of candies selected:

x + y = 9

The second equation represents the total number of points obtained:

2x + 3y = 22

Therefore, the system of equations is:

x + y = 9

2x + 3y = 22

This is a system of linear equations.

Learn more about system of linear equations at brainly.com/question/13729904

#SPJ1

Consider the graph of function f below. A diagonal curve declines through (negative 6, 7), (negative 5, 5), (negative 4, 3), (negative 3, 1), (3, negative 1, negative 3), (0, negative 5) and (1, negative 7) on the x y coordinate plane. The function g is a transformation of f. If g has a y-intercept at -1, which of the following functions could represent g? A. g(x) = f(x) - 1 B. g(x) = f(x + 4) C. g(x) = f(x - 1) D. g(x) = f(x) + 4

Answers

The function g(x) is defined as follows:

D. g(x) = f(x) + 4.

What is a translation?

A translation happens when either a figure or a function is moved horizontally or vertically on the coordinate plane.

The four translation rules for functions are defined as follows:

Translation left a units: f(x + a).Translation right a units: f(x - a).Translation up a units: f(x) + a.Translation down a units: f(x) - a.

The y-intercept for each function is given as follows:

f(x): y = -5.g(x): y = -1.

Meaning that g(x) is a translation up four units of function f(x), hence it is defined as follows:

g(x) = f(x) + 4.

More can be learned about translations at brainly.com/question/28174785

#SPJ1

Answer: D

Step-by-step explanation:

The function g(x) is defined as follows:

D. g(x) = f(x) + 4.

What is a translation?

A translation happens when either a figure or a function is moved horizontally or vertically on the coordinate plane.

The four translation rules for functions are defined as follows:

Translation left a units: f(x + a).

Translation right a units: f(x - a).

Translation up a units: f(x) + a.

Translation down a units: f(x) - a.

The y-intercept for each function is given as follows:

f(x): y = -5.

g(x): y = -1.

Meaning that g(x) is a translation up four units of function f(x), hence it is defined as follows:

g(x) = f(x) + 4.

The line plots represent data collected on the travel times to school from two groups of 15 students.

A horizontal line starting at 0, with tick marks every two units up to 28. The line is labeled Minutes Traveled. There is one dot above 4, 6, 14, and 28. There are two dots above 10, 12, 18, and 22. There are three dots above 16. The graph is titled Bus 47 Travel Times.

A horizontal line starting at 0, with tick marks every two units up to 28. The line is labeled Minutes Traveled. There is one dot above 8, 9, 18, 20, and 22. There are two dots above 6, 10, 12, 14, and 16. The graph is titled Bus 18 Travel Times.

Compare the data and use the correct measure of center to determine which bus typically has the faster travel time. Round your answer to the nearest whole number, if necessary, and explain your answer.

Bus 18, with a median of 13
Bus 47, with a median of 16
Bus 18, with a mean of 13
Bus 47, with a mean of 16

Answers

The correct option regarding which bus has the least spread among the travel times is given as follows: Bus 14, with an IQR of 6.

How to solve

The interquartile range is a better measure of spread compared to the range of a data-set, as it does not consider outliers.

For groups of 15 students, we have that:

The first half is composed by the first seven students, hence the first quartile is the fourth dot, which is the median of the first half.

The second half is composed by the last seven students, hence the first quartile is the eleventh dot, which is the median of the first half.

The quartiles for Bus 14 are given as follows:

Q1 = 12.

Q3 = 18.'

Hence the IQR is of:

IQR = Q3 - Q1 = 18 - 12 = 6.

The quartiles for Bus 18 are given as follows:

Q1 = 9.

Q3 = 16.

Hence the IQR is of:

IQR = Q3 - Q1 = 16 - 9 = 7.

Hence Bus 14 is the more consistent bus, due to the lower IQR.

Read more about IQR here:

https://brainly.com/question/4102829

#SPJ1

Evaluate each expression using the graphs of y=f(x) and y=g(x) shown below.

Answers

The composition of functions is solved and the expressions are

a) ( g o f ) ( -1 ) = 1

b) ( g o f ) ( 0 ) = 4

c) ( f o g ) ( -1 ) = -2

d) ( f o g ) ( 4 ) = -1

Given data ,

Let the composition of function be represented as A

Now , the value of A is

a)

( g o f ) ( -1 ) = g ( f ( -1 ) )

On simplifying the function , we get

when x = -1 , f ( -1 ) = 2

g ( 2 ) = 1

So , ( g o f ) ( -1 ) = 1

b)

( g o f ) ( 0 ) = g ( f ( 0 ) )

On simplifying the function , we get

when x = 0 , f ( 0 ) = 0

g ( 0 ) = 4

So , ( g o f ) ( 0 ) = 4

c)

( f o g ) ( -1 ) = f ( g ( -1 ) )

On simplifying the function , we get

when x = -1 , g ( -1 ) = 2

f ( 2 ) = -2

So , ( f o g ) ( -1 ) = -2

d)

( f o g ) ( 4 ) = f ( g ( 4 ) )

On simplifying the function , we get

when x = 4 , g ( 4 ) = 1

f ( 1 ) = -1

So , ( f o g ) ( 4 ) = -1

Hence , the composition of function is solved

To learn more about composition of functions click :

https://brainly.com/question/17673639

#SPJ1

What linear function equation is represented by this graph?

ANSWER: 1
3

x−4 just took the test

Answers

Answer:

The linear function is y = (1/3)x - 4.

Step-by-step explanation:

The y-intercept is -4. Starting at (0, -4), go up 1 unit and then right 3 units. You will end at (3, -1). So the slope of this line is 1/3, and it follows that the function is

y = (1/3)x - 4.

What is the output for x = -1

Answers

Answer:

f(-1) = 16

Step-by-step explanation:

"output" and the f(x) setup just means to plug in -1 in place of x and calculate.

For the function f(x) = 12(3/4)ˣ you have to already know that once you put that -1 in place of x that the -1 power only goes to the 3/4, not the 12 and also what to do with a negative exponent.

Exponent rules are just shortcuts. The shortcut to know here is that the -1 exponent will flip the 3/4 over and make it 4/3 (there are math reasons for this, it's not random. But that's how it works)

So now you have

f(-1) = 12(3/4)⁻¹ which becomes

f(-1) = 12(4/3)

Now you need to know how to multiply with fractions. Here you have a whole, big number times a fraction, which is:

"big num×top all over bottom"

So multiply the 12 times the 4 and put it over the 3

f(-1) = 48/3 = 16

(or you can "cancel" the 12 with the 3 and get 4×4, which is 16, so it comes out the same)

[SKIP TO HERE IF YOU DON'T CARE WHY]

f(x) = 12(3/4)ˣ

f(-1) = 12(3/4)⁻¹

f(-1) = 12(4/3)

f(-1) = 16

inverse statement of M implies N

Answers

The inverse statement of M implies N is a negation of both the conclusion and the hypothesis.

What is an inverse statement?

An inverse statement is one in which both the hypothesis and the conclusion are negated. Let us assume a statement with the hypothesis and conclusion as follows: If they annul the law, we will drive carelessly.

The inverse of this statement will be: If they do not annul the law, we will not drive carelessly. So, both the hypothesis and the conclusion are rewritten in negative terms.

Learn more about inverse statements here:

https://brainly.com/question/30045217

#SPJ1

Which of these are statistical questions? Select ALL that Apply Question 1: How many minutes does it usually take each teacher to get from home to work? Question 2: During the past year did you work for more than 50 weeks? Question 3: During the past year how many hours did each teacher usually work each week? Question 4: How many extra hours did each doctor work each week?

Answers

The statistical questions are:

Question 1: How many minutes does it usually take each teacher to get from home to work?Question 3: During the past year how many hours did each teacher usually work each week?Question 4: How many extra hours did each doctor work each week?

What is a statistical question?

A statistical question is a question that can be answered by collecting and analyzing data. It is a question that expects a variability in the response, meaning different individuals may give different answers. Statistical questions usually ask about a population, a group of individuals or objects that share a common characteristic or feature, and seek to understand a pattern or trend within that population.

In general, a statistical question is open-ended, does not have a single correct answer, and requires data analysis to arrive at a reasonable conclusion.

Learn more about statical questions here: https://brainly.com/question/12150562

#SPJ1

In a shipment of 1,750 seeds of each type, how many more defective bean seeds would be expected than pumpkin seeds?

Answers

There would be 35 more defective bean seeds than pumpkin seeds in the shipment.

How to solve

Calculate the number of defective bean seeds:

Defective bean seeds = Total bean seeds * Defect rate for bean seeds

Defective bean seeds = 1,750 * 0.05 = 87.5

Since we can't have half a seed, we'll round it up to the nearest whole number.

Defective bean seeds = 88

Calculate the number of defective pumpkin seeds:

Defective pumpkin seeds = Total pumpkin seeds * Defect rate for pumpkin seeds

Defective pumpkin seeds = 1,750 * 0.03 = 52.5

Similarly, we'll round it up to the nearest whole number.

Defective pumpkin seeds = 53

Calculate the difference in defective seeds:

Difference in defective seeds = Defective bean seeds - Defective pumpkin seeds

Difference in defective seeds = 88 - 53 = 35

So, there would be 35 more defective bean seeds than pumpkin seeds in the shipment.

Read more about algebra here:

https://brainly.com/question/4344214

#SPJ1

In a shipment of 1,750 seeds of each type, with a defect rate of 5% for bean seeds and 3% for pumpkin seeds, how many more defective bean seeds would be expected than pumpkin seeds?

Two points on the path of a planet are A and B. The points A and B have coordinates (1, 4, 2) and (2, –1, 3) respectively.
The line l has equation r= (2i-j+3k)+µ(i-j+k)
(a) Calculate the distance between the points A and B .
(b) The line AB makes an acute angle θ with l. Calculate θ.
(c) The point P on the line l is where λ = p.
(i) for the vector AP how that :
AP. (i-j+k)=7+3p
(ii) Hence find the coordinates of the foot of the perpendicular from the point
A to the line l.
(c) Determine the cartesian equation of line l.
(d) Determine the cartesian equation of line A

Answers

Answer:

Step-by-step explanation:

(a) The distance between two points A(x1, y1, z1) and B(x2, y2, z2) is given by the formula: AB = √((x2-x1)² + (y2-y1)² + (z2-z1)²). Substituting the coordinates of points A and B into this formula gives: AB = √((2-1)² + (-1-4)² + (3-2)²) = √(14).

(b) The direction vector of line l is given by the vector (i-j+k). The direction vector of line AB is given by the vector AB = (2-1)i + (-1-4)j + (3-2)k = i - 5j + k. The cosine of the angle between two vectors is given by the dot product of the vectors divided by the product of their magnitudes. Therefore, cos(θ) = (AB.(i-j+k)) / (|AB|.|i-j+k|) = ((i - 5j + k).(i-j+k)) / (√14.√3) = -3/√42. Hence θ = cos⁻¹(-3/√42).

©(i) Let P be the point on line l where λ = p. Then P has position vector r = (2i-j+3k)+p(i-j+k) = (2+p)i + (-1-p)j + (3+p)k. The vector AP is given by AP = r - a = ((2+p)i + (-1-p)j + (3+p)k) - (i+4j+2k) = pi - (5+p)j + pk. Taking the dot product of AP with (i-j+k), we get AP.(i-j+k)=7+3p.

©(ii) The foot of the perpendicular from point A to line l is the point on line l that is closest to point A. This point is obtained when AP is perpendicular to the direction vector of line l, which is (i-j+k). Therefore, AP.(i-j+k)=0. Substituting the expression for AP.(i-j+k), we get 7+3p=0, so p=-7/3. Substituting this value of p into the expression for r, we get r = (2-7/3)i - 8/3j + 2k. Hence, the coordinates of the foot of the perpendicular from point A to line l are (1/3,-8/3,2).

(d) The cartesian equation of a line with direction vector d and passing through a point with position vector a is given by r=a+λd. For line l, d=(i-j+k), a=(2i-j+3k), so its cartesian equation is r=(2i-j+3k)+λ(i-j+k).

Suppose you have a 4 foot sub and you have to feed 10 people ,how many cuts will you make?

Answers

Answer: Cut 3 inch per person

Step-by-step explanation:

there is a 4 foot sub you take the quadrilatiral and divide it by 10 and you get 3 inches per person remember to multiply the reciprocal by 12 as there are 12 inches in a foot and you have 4 foot so the product of that reciprocal will be equal to 4 divided by your sum from adding the recriptorcal into the quadrilateral remember a quadrilateral not a duolateral or a triolatiral as there is 4 feet in the sub. >:)

Answer:

7 Cuts

Step-by-step explanation:

This is because if you do 48 inches / 6 inches = 8 sections Since each cut will create two sections, you need to make 7 cuts (one fewer than the number of sections) to get 8 equal portions.

Can the sides of a right triangle have lengths 7,9 and the square Root of 155

Answers

Answer:

No

Step-by-step explanation:

In order for a triangle to be a right angle, the sum of the squares of the two legs (a and b) must be equal the square of the longest side, known as the hypotenuse (c):

[tex]a^2+b^2=c^2[/tex]

The square root of 155 is the longest side as it is approximately 12.45.  Thus, if the triangle is a right triangle, the square root of 155 must be the hypotenuse.

We can now check to see whether the sum of the squares of 7 and 9 equal the square of the square root of 155:

[tex]7^2+9^2=(\sqrt{155})^2\\ 49+81=155\\130=155[/tex]

The equation is not true since 130 is less than and not equal to 155.  Therefore, a triangle with side lengths 7, 9, and the square root of 155 cannot be a right triangle.

Four data sets are shown below. Set 1: {10, 19, 38, 50, 51} Set 2: {5, 21, 26, 39, 51} Set 3: {9, 38, 50, 50, 51} Set 4: {5, 28, 28, 28, 51} Which data set has the largest standard deviation? * Set 1 Set 2 Set 3 Set 4

Answers

Answer:

Set 1: {10, 19, 38, 50, 51}

Step-by-step explanation:

To calculate the standard deviation of a data set, we first find the mean of the data set. The mean is simply the sum of all the values in the data set divided by the number of values. For example, the mean of Set 1 is:

(10+19+38+50+51)/5=33.6

Next, we find the variance of the data set. The variance is the average of the squared differences between each value in the data set and the mean. For example, the variance of Set 1 is:

((10−33.6)^2+(19−33.6)^2+(38−33.6)^2+(50−33.6)^2+(51−33.6)^2)/5=323.84

Finally, we take the square root of the variance to get the standard deviation. For example, the standard deviation of Set 1 is:

[tex]\sqrt{323.84}[/tex]=17.99

We can repeat this process for each of the four data sets and find that Set 1 has the largest standard deviation.

A simple random sample of size n is drawn from a population that is normally distributed. The sample mean, x, is found to be 106, and the sample
standard deviation, s, is found to be 10.
(a) Construct a 95% confidence interval about u if the sample size, n, is 16.
(b) Construct a 95% confidence interval about u if the sample size, n, is 11.
(c) Construct a 90% confidence interval about μ if the sample size, n, is 16.
(d) Could we have computed the confidence intervals in parts (a)-(c) if the population had not been normally distributed?

Answers

In light of this, the 95% confidence interval for is (100.67, 111.33) as s is the sample standard deviation, n is the sample size.

what is standard deviation ?

A collection of information's values' standard deviation serves as a gauge for how much variance or dispersion there is. It is a statistical word used to describe the degree to which the individual data points depart as from mean or average value that is contained in the data set. By taking taking square root of the variance—the sum of the squared deviations amongst each point in the data and the mean—we can determine the standard deviation. While a high standard deviation suggests that the data points are widely dispersed, a modest standard deviation suggests that the statistics are close to the mean.

given

(a) When the sample size, n, is 16, we can apply the following formula to create a 95% confidence interval regarding the population mean, :

x ± tα/2 * (s/√n)

where t/2 is the crucial value from the t-distribution with n-1 degrees of freedom and a confidence level of 95%, and x is the sample mean, s is the sample standard deviation, n is the sample size.

We determine that t0.025,15 = 2.131 using a t-distribution table or calculator.

When we enter the values, we obtain:

106 ± 2.131 * (10/√16)

which is equivalent to:

106 ± 5.33

In light of this, the 95% confidence interval for is (100.67, 111.33) as s is the sample standard deviation, n is the sample size.

To know more about standard deviation visit :-

https://brainly.com/question/23907081

#SPJ9

The number of lattes sold daily by two coffee shops is shown in the table.

Shop A Shop B
55 45
52 42
56 57
48 48
57 11
40 10
45 46
41 43


Based on these data, is it better to describe the centers of distribution in terms of the mean or the median? Explain.
A. Mean for both coffee shops because the data distribution is symmetric
B. Median for both coffee shops because the data distribution is not symmetric
C. Mean for shop B because the data distribution is symmetric; median for shop A because the data distribution is not symmetric
D. Mean for shop A because the data distribution is symmetric; median for shop B because the data distribution is not symmetric

Answers

Based on the data given in the table, B. Median for both coffee shops because the data distribution is not symmetric

Why is the median better ?

It is better to describe the centers of distribution in terms of the median rather than the mean for both coffee shops because the data distribution is not symmetric.

The median is a better measure of central tendency in this case because it is not influenced by outliers or extreme values, which may exist in the data.

The mean, on the other hand, is sensitive to outliers and may not provide an accurate representation of the data distribution.

Find out more on centers of distribution at https://brainly.com/question/27898665

#SPJ1

find 15x2 2/3 using the distributive property

Answers

60 + 90, just multiply 15 by 2 and you get 30 so after get 30 you will multiply both by 30 which is 60 + 90

Find the missing value on the table below:
x y
2 4
? 6
4 8

Answers

3.

2*2 = 4
4*2 = 8
So y = 2x, when y is 6 x is 3

Which of the following equations are equivalent? Select three options. 2 + x = 5 x + 1 = 4 9 + x = 6 x + (negative 4) = 7 Negative 5 + x = negative 2

Answers

The answer of x is 16.

I arrived home to discover that my 50-foot by 40-foot basement has 18 inches of water in it! There are about 7.5 gallons in 1 cubic foot of water. How much water is in the basement?
Calculate using the most appropriate units to describe the amount of water, and state your answer in a meaningful sentence.

Answers

The amount of water in the basement is V = 22,500 gallons

Given data ,

To calculate the amount of water in the basement, we need to determine the volume of water in cubic feet and then convert it to the most appropriate units to describe the amount of water.

First, we need to convert the dimensions of the basement to feet, since the depth of the water is given in inches. 18 inches is equal to 1.5 feet, so the volume of water in cubic feet can be calculated as:

50 feet x 40 feet x 1.5 feet = 3,000 cubic feet

There are 7.5 gallons in 1 cubic foot of water, so the amount of water in the basement in gallons can be calculated as:

3,000 cubic feet x 7.5 gallons per cubic foot = 22,500 gallons

Hence , there are 22,500 gallons of water in the basement

To learn more about volume of rectangle click :

https://brainly.com/question/25422723

#SPJ1

Caroline fills 3 quarts pint glasses with grape juice they grape juice container si too heavy so she uses a smaller 1 quart pint pitcher yo pour the juice how many times does she have to full the smaller pitcher un order to fill 3 of the glasses with grape juice?

Answers

Caroline needs to fill the 1-quart pitcher four and a half times in order to fill all 3 pint glasses.

Calculating how to fill a container right

Since Caroline has 3 pint glasses to fill, she needs to use the 1-quart pitcher multiple times. Each time she fills the pitcher, she can pour it into 2 pint glasses

From this, we can say that Caroline needs to pour a total of 3 x 1.5 = 4.5 quarts of juice.

What is a Pitcher

Pitcher is a container with a spout and handle, used for holding and pouring liquids. It is typically used for serving beverages such as water, juice, milk, or iced tea. Pitchers can be made from a variety of materials, including glass, ceramic, metal, or plastic.

Learn more about container here:

https://brainly.com/question/30361079

#SPJ1

What is the numerical expression that represents the sun of eight squared and thirty two

Answers

The numerical expression that represents the sum of eight squared and thirty two will be 96.

A numerical expression is a mathematical expression that consists of numbers and mathematical operations such as addition, subtraction, multiplication, division, and exponentiation.

The numerical expression that represents the sum of eight squared and thirty two is

= 8² + 32

= 64 + 32

= 96.

The question is incomplete and the complete question is '' What is the numerical expression that represents the sum of eight squared and thirty two''.

To know more about numerical expression here

https://brainly.com/question/27089337

#SPJ1

Other Questions
Question 3 of 25How are genes and proteins related?OOOA. Genes and proteins are both made of DNA.B. Proteins are made from instructions in genes.C. Proteins are made of parts of genes.D. Proteins are used to build genes. What is the difference between practical work inside a laboratory and outside a laboratory Mrs. Austin has 10 students in her class. She asked them whether they like football (F) or basketball (B). Sarah, Allen, kara, Todd said football. Joseph, Lydia, Matt said basketball. Caleb and Britney said they like both. Ethan said he didn't like either. 1. Define the universal set. 2. Define the two subsets. Solve 8 w 72. Graph the solution. Please help Which of the following statements best describes the function of the supreme court? to pass whatever laws are best for the country as a whole to sign bills into law to settle legal disputes and determine the constitutionality of laws to monitor the executive branch Let f: R+R be a function that satisfies O 0. (a) Show that the series cosh(f(n)) ne1 diverges regardless of the rule for f. (b) Show that the series ( f(n) 2n3 - 1 converges regardless" Giant kelp forests are ocean ecosystems that are found along the California coast. This food chain shows one of the feeding relationships in giant kelp forests. Make a claim about how a decrease in the population size of California sea otters will most likely affect the population size of the giant kelp and provide reasoning to support your claim. I don't understand how to get the answer can someone help me? how long does it take for sperm to reach the egg while ovulating? determine if each of the numbers below is a solution to the inequality 3x-2 cot0 equals 6, lies in quadrant 3 sin20 x-3 5. The function f(x)=- has X? - 8x+15 Math 1P97 Final Exam April 2010 page 3 of 19 a. a discontinuity at x = 3 only b. discontinuities at = 3 and x = 5 c. no discontinuities d. a discontinuity at x = 5 only e, none of the above 1. Suppose a firm can hire workers for $40 per hour. The marginal product of the last worker hired is 80. This same firm can pay $60 to rent machines that do the same work as labor but at a higher rate of productivity. The marginal product of the last machine is 100. Is this firm at its cost-minimization combination of its inputs of labor and capital Which of the following is a cause of the challenges to social security? a. economic depression c. ageism b. longer life expectancies d. increasing dependency ratio please select the best answer from the choices provided a b c d consider light falling on a single slit, of width 1.2 m, that produces its first minimum at an angle of 32.3. randomized variables = 32.3 w = 1.2 m Out of all the people who like chocolate, what is the relative frequency for selecting a teen? Share one interesting fact about William Shakespeare you learned from watching and listening to the Flocabulary rap song. Find the critical points for the function f(x, y) = x + y 9x 3y - 6 = and classify each as a local maximum, local minimum, saddle point, or none of these. critical points: (give your points as a comma separated list of (x,y) coordinates.) classifications: (give your answers in a comma separated list, specifying maximum, minimum, saddle point, or none for each, in the same order as you entered your critical points) (C++ only)Write a program that repeatedly reads in integers until a negative integer is read. The program also keeps track of the largest integer that has been read so far and outputs the largest integer at the end.Ex: If the input is: 2 77 17 4 -1The output is 77 -Which identification of the variables is correct?A. The volume of the solution and the concentration of the solution are being changed between the two solutions, but the number ofsolute particles is being held constant. B. The volume of the solution and the number of solute particles are being changed between the two solutions, but the concentrationof the solution is being held constant. C. The number of solute particles and the concentration of the solution are being changed between the two solutions, but the volumeis being held constant. D. The number of solute particles is being changed between the two solutions, but the volume and concentration of the solution isbeing held constant.