Balance the reaction. A coefficient of "1" is understood. Choose option "blank" for the correct answer if the coefficient is "1." 2AgNO₃ + MgCl₂ 2AgCl + Mg(NO₃)₂

The question is incomplete, the complete question is;

The oxide of element X is reduced by heating with carbon.

Element X does not react with cold water, steam or dilute hydrochloric acid.

What is X?

A copper

B iron

C magnesium

D zinc

Answer:

Copper

Explanation:

Copper is below hydrogen in the activity series of metals. Remember that the activity series of metals is an arrangement of metals in order of decreasing reactivity from most reactive to least reactive. The metals at the head of the series are highly reactive, metals at the middle of the series are moderately reactive while metals below hydrogen in the series are least reactive.

Copper being below hydrogen in the series cannot displace it from water (cold or steam) or from dilute acid solutions. Copper can be reduced by heating it with carbon (thermal reduction).

Answer:

Basis and basic​ are two different words.

In English, Basis is used as a noun while basic is used as an adjective. Basis term refers as the base or starting point of any discussion.

For example: Bread is a basic ingredient of cake.

                      On the basis of Mendel's hypothesis.

In chemistry, Basis set is used as a set of functions that represent the electronic wave function in the density-functional theory which forms an  algebraic equations that can be easily implemented on a computer.

While Basic term is used for substances that can accept a hydrogen ion (H+) from another substance and have pH above 7. such as sodium.

So, It is not important that both the terms, basis and basic change their English meaning if used in chemistry, they both can be used with English meaning in chemistry as well. Bases and basic,​ both the terms can be used as either English or Chemistry without affecting the meaning.

Answer: Quartz

Explanation: I looked it up ;)

Answer:

1. Methyl propanoate.

2. Propanol.

3. 2–pentyne

Explanation:

1. The functional group in this case is ester. We name ester by naming the group after the functional group (–COO) then followed by the parent compound with the name ending with –oate.

The group after the functional is methyl i.e —CH3.

The parent compound has 3 carbon i.e propane. The functional group replaces the –e in propane with –oate.

Therefore, the name of the compound is:

Methyl propanoate.

2. In this case the functional group is

–OH i.e alcohol.

The compound has 3 carbon i.e propane. The functional group replaces the –e in propane with –ol.

Therefore, the name of the compound is:

Propanol.

3. The triple bond represents the functional group in this case i.e alkyne. We'll give the triple bond the lowest low count by counting from the left. The triple bond is at carbon 2.

The compound has 5 carbon i.e pentyne since it contains triple.

The name of the compound is:

2–pentyne

Answer:

C8H16

Explanation:

First thing to do here is to calculate the molar mass of the compound

Mathematically;

molar mass = mass/number of moles

we can calculate the number of moles using the ideal gas equation

Mathematically;

PV = nRT

n = PV/RT

where p is the pressure at 5 atm

V is the volume at 568 ml = 568/1000 = 0.568 L

R is the molar gas constant which is 0.0821

T is the temperature which is 120+ 273 = 393k

Inserting these values into the equation, we have

n = (5 * 0.568)/(0.0821 * 393)

n = 0.088 moles

So the molar mass = 10/0.088

= 114 g/mol

Now let’s go to the percentages

C = 84.2/12 = 7.016666666666667

H = 15.8/1 = 15.8

divide by the smallest

C = 7.016666666666667/7.016666666666667 = 1

H = 15.8/7.016666666666667 = 2 approximately

The empirical formula is CH2

So for the molecular formula, we have;

(12 + 2)n = 114

14n = 114

n = 114/14 = approximately 8

So the molecular formula of the liquid will be (CH2)n = C8H16

Answer:

See the answer below

Explanation:

Aqueous solution of copper II nitrate contains solute of copper II nitrate dissolved in water. The equation for the reaction is as below:

[tex]Cu(NO_3)_2 (s)[/tex] + [tex]H_2O (l)[/tex] --> [tex]Cu(NO_3)_2 (aq)[/tex]

Hence, the solute chemical is copper II nitrate while the solvent is water.

Chemical formula of copper II nitrate - [tex]Cu(NO_3)_2[/tex]

Chemical formula of water - [tex]H_2O[/tex]

A chemical  reaction involves the interaction of reactants. The substance X ,must be an acid and in this case is CH3COOH

In chemistry, a reaction is said to occur when substances interact in such a way that other new substances are formed.

Now let us look at the particular reaction; NaOH + X ----> NaCH3COO + H2O. The substance X must be an acid. Hence, the most likely susbstance is CH3COOH.

Learn more about reaction: https://brainly.com/question/22817140

Answer:

B: it allow quick conversation to others

Answer:

A: 2.525 x 10-4 mol

B: 2.583 x 10-4 mol

Explanation:

Part A:

Data Given:

. Temperature of water (H2O) = 21.3°C

Convert Temperature to Kelvin

T = °C + 273

T = 21.3 + 273 = 294.3 K

volume of (H2O) gaseous state = 5.1 mL

Convert mL to liter

1000 mL = 1L

5.1 ml = 5.1/1000 = 0.0051 L

Pressure = 1.2 atm

. no. of moles = ?

Solution

no. of moles can be calculated by using ideal gas formula

PV = nRT

Rearrange the equation for no. of moles

n=PV/RT......... (1)

where

P = pressure

V = Volume

T= Temperature

n = Number of moles

R = ideal gas constant

where

R = 0.08206 L.atm/ mol. K

Now put the value in formula (1) to calculate no. of moles of

n = 1.2 atm x 0.0051 L / 0.08206 L.atm.mol-1. K-1 x 294.3 K

n = 0.0061 atm.L / 24.162 L.atm.mol-1

n = 2.525 x 10-4 mol

no. of moles of gas (H2O) = 2.525 x 10-4 mol

Part B:

Data Given:

Temperature of water (H2) = 21.3°C

Convert Temperature to Kelvin

T = "C + 273

T= 21.3 + 273 = 294.3 K

volume of (H2) gas = 5.2 mL

Convert mL to liter

1000 mL = 1 L

5.2 ml = 5.2/1000 = 0.0052 L

Pressure = 1.2 atm

. no. of moles = ?

Solution

no. of moles can be calculated by using ideal gas formula

PV = nRT

Rearrange the equation for no. of moles

n= PV / RT......... (1)

where

P = pressure

V = Volume

T= Temperature

n = Number of moles

R = ideal gas constant

where

R = 0.08206 L.atm/mol. K

Now put the value in formula (1) to calculate no. of moles of

n = 1.2 atm x 0.0052 L/0.08206 L.atm.mol-1. K-1 x 294.3 K

n = 0.0062 atm.L/ 24.162 L.atm.mol-1

n = 2.583 x 10-4 mol

I

no. of moles of gas (H2) = 2.583 x 10-4 mol

Answer:

152

Explanation:

since it weighs 1.9 grams per [tex]cm^{3}[/tex] we get 80*1.9 which is 152 grams

Matter are anything that is made up of atoms. The similarity among  solid ice, liquid water and water vapor is the water molecule and dissimilarities  is the difference in kinetic energy.

Matter is a substance that has some mass and can occupy some volume. The matter is mainly used in science. Matter can be solid, liquid or gas.

The similarity in the in the particles of  solid ice, liquid water and water vapor is that each of these have same type of molecules that is water molecules. The dissimilarities in  the in the particles of  solid ice, liquid water and water vapor is that particles of of each of these have different kinetic energy.

Therefore, similarity among  solid ice, liquid water and water vapor is the water molecule and disimilarity is the difference in kinetic eneergy.

To learn more about matter, here:

https://brainly.com/question/4562319

#SPJ1

Answer:

To separate an insoluble solid from a soluble solid:  Mixing the mixture with water, filtering out the insoluble solid, and then evaporating the water to isolate the soluble solid.

Explanation:

Answer:

D

Explanation:

Atomic radii decrease slightly and then start to increase.

Atomic radius of transition metals from left to right increases slightly then decreases. Thus it is not following the trend as for other periods. Hence, option c is correct.

Transition metals are d-block elements in periodic table. starting from group 3 to group 12. Transition metals are called so because they are in between gases and metals in periodic table.

All transition metals shows varying oxidation states.  For example, iron Fe shows +2 and +3 and copper shows +1, +2 and +3.  Transition metals are malleable, ductile and are good conductors of heat and electricity.

From left to right in a row in periodic table, the atomic radius decreases and electronegativity increases. However, this trend is not systematic in the case of transition metals where, the atomic radii increases first and then decreases.

To find more on transition metals, refer here:

https://brainly.com/question/14516782

#SPJ6

Your question is incomplete, but your complete question probably was:

Which is true of transition metals when moving from left to right on the periodic table

The d sublevels are not filled across the period.

The cation radii become larger across the period.

Atomic radii increase slightly and then start to decrease.

Atomic radii decrease slightly and then start to increase.

Answer:

may be the first one is a producer

Answer:

[tex]\large \boxed{1.447 \times 10^{23}\text{ molecules Cu(OH)}_{2 }}[/tex]

Explanation:

1. Calculate the moles of copper(II) hydroxide

[tex]\text{Moles of Cu(OH)}_{2} = \text{23.45 g Cu(OH)}_{2} \times \dfrac{\text{1 mol Cu(OH)}_{2}}{\text{97.562 g Cu(OH)}_{2}} = \\\\\text{0.240 36 mol Cu(OH)}_{2}[/tex]

2. Calculate the molecules of copper(II) hydroxide

[tex]\text{No. of molecules} = \text{0.240 36 mol Cu(OH)}_{2} \times \dfrac{6.022 \times 10^{23}\text{ molecules Cu(OH)}_{2}}{\text{1 mol Cu(OH)}_{2}}\\\\= 1.447 \times 10^{23}\text{ molecules Cu(OH)}_{2}\\\text{The sample contains $\large \boxed{\mathbf{1.447 \times 10^{23}}\textbf{ molecules Cu(OH)}_{\mathbf{2}}}$}[/tex]

Answer:

Mass of Cu(OH)2 = 23.45 g

Molar mass of Cu(OH)2 = 97.562 g/mol

Since we know,

Moles = Mass/Molar mass

\Rightarrow Moles = (23.45 g)/(97.562 g/mol) = 0.2404 moles

Since 1 mole of substance contains = 6.022 × 1023 molecules

So 0.2404 moles will contain = 0.2404*(6.022 × 1023 molecules) = 1.448 × 1023 molecules

Explanation:

Answer:

changes from a solid to a liquid

Explanation:

C- A solid is being formed

Since the delta is negative, this indicates that a substance is transforming from a liquid state to a solid state. This best corresponds with C- A solid is being formed.

Answer:

Visible wavelengths range from 0.0007 milimeters for red light, through orange, yellow, green, and blue, to 0.0004 milimeters for violet light.

Ultraviolet is shorter wavelengths than violet.

Hope This Helps.

Answer:

m = 17

Explanation:

From the question we were given that

Triangle WZY is bisected by ZX; ZW = ZY

∠YXZ = (6m – 12)°

Based on the characteristics of the triangle, we see that triangle WYZ is an isosceles triangle (that is, triangle WXZ is equal to triangle YXZ)

<YXZ = <WXZ = 90°

Using ∠YXZ  = (6m – 12)°

We have:

(6m – 12)° =  90°

6m = 90 + 12 ⇒ 6m = 102

m = 102 ÷ 6 = 17

m = 17

We therefore see that m is equal to 17

Answer:

B: 17

Explanation:

Answer:

1.2M

Explanation:

Initial Volume 0.05L

Final Volume 0.250L

HCl Molar mass: 36.46 g/mol

M = 6M HCl

Molarity = mol solute /  L of solution

Inital M = Molarity = 6

mol solute = X = unknown

L of Solution = 0.05L

6 = X / 0.05

X = 0.3

X = 0.3/0.25

X = 1.2 M

​  

Answer:

Lose 2 electrons

Explanation:

Answer:

A. 2.71 V

Explanation:

The standard reduction potential, E° of the metals are as follows:

Mg²⁺ + 2e⁻ ⇌  Mg; E° = -2.372

Cu²⁺ + 2e⁻ ⇌  Cu; E° = +0.337

Since magnesium has the the lower E°, it will serve as the anode in the electrolytic cell while copper will serve as the cathode.

At the anode; Mg ⇌  Mg²⁺ + 2e⁻, E° = -2.372

At the cathode; Cu²⁺ + 2e⁻ ⇌  Cu, E° = +0.337

EMF of the cell = E° cathode - E° anode = 0.337 - (-2.372) = 2.71 V

Therefore, EMF of the cell is 2.71 V

Answer:-2.71 is the correct answer

Explanation:

A P E X

Answer:

Milk of Magnesia would consume the most stomach acid at almost 3 times the amount as baking soda.

Explanation:

Baking Soda = NaHCO3(s)+HCl(aq)=H20(l)+CO2(g)

NaHCO3 Molar mass of 84.007 g/mol

0.012 Moles of NaHCO3 and since an equal ratio of HCl is required

we therefore neutralize 0.012 Moles of HCl

Milk of magnesia = Mg(OH)2(s)+2HCl(aq)=2H20(l)+MgCl2(aq)

Mg(OH)2(s) Molar mass: 58.3197 g/mol

0.017 Moles of Mg(OH)2 and the ratio is 2:1, so 2 moles for each 1 mole of Mg(OH)2, so we need 0.034 Moles of HCl

If the water vapor content remains the same and the temperature decreases, the relative humidity rises.

If the water vapor content remains the same and the temperature increases, the relative humidity falls.

This is because colder air doesn’t need as much moisture to become saturated as warmer air.

Hope this helps

Answer:

C- 0.25mol/L

Explanation:

Hcl+Naoh-Nacl+H2O

Ratio =1:1

0.2moles of Naoh in1000cm3 what about 25=(25×0.2)÷1000=

0.005moles

0.005moles in 20cm³ what about in 1000

(0.005×1000)÷20=0.25mol/L

According to the molar concentration, the concentration of the acid is 2.5 mole/liters.

Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.

The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.

In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.In case of 2 solutions, molar concentration is obtained as M₁V₁=M₂V₂, on substitution of values, M₁=25×0.20/20=2.5 mole/L.

Thus,the concentration of the acid is 2.5 mole/liters.

Learn more about molar concentration,here:

https://brainly.com/question/21841645

#SPJ2

Answer:

Mendeleev arranged the elements in order of increasing relative atomic mass. When he did this he noted that the chemical properties of the elements and their compounds showed a periodic trend. He then arranged the elements by putting those with similar properties below each other into groups.

-- He left gaps for yet to be discovered elements

-- He switched the order of a few elements to keep the groups consistent

-- He was the first scientist to give the periodic law.

Answer:

1st answer choice

P4O6 + 2 O2 -> P4O10

Explanation:

You need to cancel out reactants and products that are the same.

P4 cancels out because it appears in both reactants and products

We get 2 O2 in the reactants because 5-3= 2

Thus, answer choice 1 is correct.

Answer:

Volume=mass in g /density

Answer: 40cm^3 or 40ml

Explanation:

[tex]Density=\frac{mass}{volume}[/tex]

so 5=200/V

V=200/5

V=40cm^3

Answer:

C. the substance in which the solute dissolves

Explanation:

There are two terms in this... the solute and the solvent. The way I learned how to remember this is with a little pirate analogy: The loot (stolen treasure) always goes in the vent. So, the soLUTE goes in the solVENT.