at which financial institution can you open a savings account?
a. check casher/currency exchange
b. payday lender
c. credit union
d. you can open a savings account at all of these.

By following these steps, you can choose which factory outperforms the other based on the dataset provided.

1. Organize the dataset

2. Calculate the total products

3. Calculate the average daily production

4. Compare the performance

To determine which factory outperforms the other using a dataset containing the number of products manufactured per day in each factory over a year, follow these steps:

Step 1:  Ensure that the dataset is properly structured, with columns for factory (A and B), date, and the number of products manufactured per day.

Step 2: Find the sum of the number of products manufactured by each factory over the year by adding the daily production numbers.

Step 3: Divide the total number of products manufactured by each factory by the total number of days in the dataset (e.g., 365 days).

Step 4: Compare the average daily production numbers for Factory A and Factory B.

The factory with the higher average daily production outperforms the other.

To know more about outperform refer here:

https://brainly.com/question/31007366

#SPJ11

The creditors list and creditors control balances must be the same because the creditors list is a detailed record of individual creditor accounts, while the creditors control account is a summary account that shows the total amount owed to all creditors.

If these two balances are not the same, it means that there are errors in either the individual creditor accounts or the summary account. This could result in overpayments or underpayments to individual creditors, leading to inaccurate financial reporting and potentially damaging the company's reputation with suppliers. Therefore, it is essential to ensure that the balances in both accounts match to ensure accurate record-keeping and financial reporting.

To know more about creditors, here

brainly.com/question/22912208

#SPJ4

The failure rate of all new businesses is difficult to determine as it can vary significantly depending on various factors such as industry, location, size, and management. However, studies suggest that the overall failure rate for new businesses is around 20% within the first year, and about 50% within the first five years.

The failure rate of all new franchises is also difficult to determine, but it is generally believed to be lower than the failure rate for independent businesses. Some studies suggest that the failure rate for new franchises may be as low as 10-20%, while others suggest that it may be slightly higher.

Based on these numbers, it can be inferred that the failure rate for new businesses is relatively high, and that starting a business is a risky proposition. However, the failure rate for new franchises may be lower, which suggests that buying a franchise may be a safer way to enter the business world. It is important to note that these are generalizations, and there are many factors that can influence the success or failure of a business or franchise.  

Learn more about failure rate Visit: brainly.com/question/31523454

#SPJ4

The relevant marginal cost for the community where Sasha produces and sells her candy is $5 per hour.

To determine the profit-maximizing level of output, the firm needs to consider the cost of labor and the revenue generated from selling the output. In this case, the firm can sell as many potatoes as it wants for $2 per pound and has to pay each worker $5 per hour.

To calculate the profits, we need to subtract the cost of labor from the revenue generated from selling the output. For instance, if the firm employs one worker and produces 3 pounds of Candy per hour, its revenue will be 3 x $2 = $6, and the cost of labor will be $5. Hence, the profit will be $1.

We can observe that the firm's profits are maximized when it employs three workers, as it generates the highest profit of $5 per hour. Hence, to maximize profits, the firm should employ three workers.

To know more about marginal cost here

https://brainly.com/question/7781429

#SPJ4

In auditing long-term bonds payable, an auditor most likely would perform various procedures to obtain reasonable assurance that the financial statements are free from material misstatements. One of the key procedures an auditor would perform is to compare the interest expense with the bond payable amount for reasonableness.

This is done to ensure that the interest expense recorded in the financial statements is in line with the bond payable amount.
Additionally, the auditor would examine the documentation of assets purchased with bond proceeds for liens. This is done to ensure that the assets purchased using the bond proceeds are free from any liens or encumbrances that could impact the value of the assets.
Furthermore, the auditor would perform analytical procedures on the bond premium and discount accounts. This is done to ensure that the premium and discount accounts are appropriately recorded in the financial statements and that any fluctuations in these accounts are reasonable and can be explained.
In summary, an auditor would perform various procedures when auditing long-term bonds payable, including comparing interest expense with the bond payable amount for reasonableness, examining documentation of assets purchased with bond proceeds for liens, and performing analytical procedures on the bond premium and discount accounts. These procedures are essential in ensuring that the financial statements are free from material misstatements and are reliable.

For more such questions on auditor

https://brainly.com/question/7890421

#SPJ11

The check amount that Acorn Company would need to send to settle the account depends on whether they took the discount or not:
- If they took the discount, they would need to send a check for $3,352.40.
- If they didn't take the discount, they would need to send a check for $3,500.

First, let's break down the credit terms:
- 2/10 means that if the customer pays within 10 days of the invoice date, they can take a 2% discount off the total amount owed.
- n/30 means that the full amount is due within 30 days of the invoice date, with no discount offered after the first 10 days.
So, in this case, Gen-Tech sells $4,000 worth of merchandise on account to Acorn Company with these credit terms.
If Acorn Company decides to take advantage of the discount, they would pay $4,000 - (2% of $4,000) = $3,920 within 10 days of the invoice date. If they don't pay within 10 days, they owe the full $4,000 within 30 days.
Now, let's say that within the discount period, Acorn Company returns $500 worth of damaged merchandise. This means that they now only owe $3,500 (either $3,920 - $500 = $3,420 if they took the discount, or $4,000 - $500 = $3,500 if they didn't).
The question asks what check amount Acorn Company would need to send to settle the account. If they took the discount, they would owe $3,420 - 2% of $3,420 = $3,352.40. If they didn't take the discount, they would owe $3,500.
Therefore, the check amount that Acorn Company would need to send to settle the account depends on whether they took the discount or not:
- If they took the discount, they would need to send a check for $3,352.40.
- If they didn't take the discount, they would need to send a check for $3,500.

for more such questions on  Company

https://brainly.com/question/24553900

#SPJ11

The entry to record the sale of the tractor on January 1, 2015 will show:Cash -$35,000, Accumulated depreciation-$33,000, Loss on sale of tractor $22,000, Tractor- $90,000

The accumulated depreciation is calculated as follows:

Total estimated hours of operation = 8 years x 10,000 hours/year = 80,000 hours

Depreciation per hour = (Cost - Salvage value) / Total estimated hours of operation

Depreciation per hour = ($90,000 - $10,000) / 80,000 hours = $1.00 per hour

Total depreciation for 2,400 hours in 2013 = 2,400 hours x $1.00/hour = $2,400

Total depreciation for 2,100 hours in 2014 = 2,100 hours x $1.00/hour = $2,100

Accumulated depreciation as of January 1, 2015 = $2,400 + $2,100 = $4,500

The loss on the sale of the tractor is calculated as follows:

Sale price - Book value = $35,000 - ($90,000 - $4,500) = $22,000.

learn more about Accumulated depreciation here:

https://brainly.com/question/30369224

#SPJ11

The tax rate is 21 percent.  The firm's cost of preferred stock is 10.83%.

The cost of preferred stock is the dividend paid on the preferred stock divided by the net proceeds from the sale of the preferred stock. The net proceeds are the sale price of the preferred stock less any flotation costs.

Annual dividend = $5.20 per share

Sale price = $48 per share

Tax rate = 21%

Flotation costs are not given in the problem, so it is assumed that there are no flotation costs. Therefore, the net proceeds from the sale of preferred stock will be equal to the sale price.

Rp = $5.20/$48 = .1083, or 10.83 percent

Learn more about flotation costs at:

brainly.com/question/28269212

#SPJ4

The total discount points the lender have to charge to increase the lenders' yield to 13 percent is equal to 3.23 discount points.

To solve this problem, we can use the formula for the present value of a loan:

PV = PMT * (1 - 1/(1+r)^n) / r

where PV is the present value of the loan, PMT is the monthly payment, r is the monthly interest rate, and n is the total number of payments.

First, we can calculate the monthly payment using the loan amount, interest rate, and amortization period:

PMT = P * r / (1 - (1+r)^(-n))

we get:

PMT = 300000 * 0.01 * (1 + 0.01)^360 / ((1 + 0.01)^360 - 1) = $2,962.48

Next, we need to calculate the present value of the loan at a 13 percent yield for the lender. We can use the same formula as before, but with a different interest rate:

PV = PMT * (1 - 1/(1+r)^n) / r

where r is the new monthly interest rate that corresponds to a 13 percent annual yield. We can solve for r using the following equation:

(1+r)^12 - 1 = 0.13 / 12

which gives us r = 0.010769.

Plugging in the new values, we get:

PV = 2962.48 * (1 - 1/(1+0.010769)^360) / 0.010769 = $309,695.35

To find the number of discount points the lender needs to charge,

Discount Points = (PV - P) / P * 100

where P is the original loan amount and PV is the present value of the loan at the 13 percent yield.

Plugging in the numbers, we get:

Discount Points = (309695.35 - 300000) / 300000 * 100 = 3.23 points

Therefore, the lender would have to charge 3.23 discount points to increase their yield from 12 percent to 13 percent.

Learn more about discount points at:

brainly.com/question/14329985

#SPJ4

Some changes made to the CRM system could be the potential reason for this and the user should review the error message carefully to address the error.

The bot's error message at the final stage of the workflow could be caused by a number of different factors.  They should check to determine whether the CRM application has undergone any modifications since the bot's creation and, if so, update the recorded flow to reflect those changes.

If the error keeps occurring the user may need to perform troubleshooting by looking over the bot logs and the application logs to find any errors or problems that might be the root of the issue. In order to see if there are any problems or errors the user could also try running the workflow manually. If the issue cannot be fixed they might need to speak with technical support or the person who created the bot for additional help.

Learn more about CRM system at:

brainly.com/question/13149610

#SPJ4

Here is the answer for shared question:

a) To allocate Blossom's total selling price for the irrigation system and installation to the two performance obligations (delivery of the irrigation system and installation), we need to use the relative standalone selling price method. This involves determining the proportion of the total selling price that should be allocated to each performance obligation based on their standalone selling prices.

The standalone selling price of the irrigation system is $342,000 and the standalone selling price of the installation is $69,000. Therefore, the total standalone selling price is $411,000 ($342,000 + $69,000).

Using this information, we can calculate the allocation of the total selling price as follows:

Irrigation system: $342,000 / $411,000 x $375,000 = $312,195.12

Installation: $69,000 / $411,000 x $375,000 = $62,804.88

Therefore, the allocation of the total selling price for the irrigation system and installation is as follows:

Irrigation system: $312,195.12

Installation: $62,804.88

b) Blossom delivered the irrigation system on March 14, 2017. Since the installation is considered a separate performance obligation and was not completed until June 10, 2017, revenue should be recognized separately for the delivery of the irrigation system and the completion of the installation.

The revenue to be recognized in the first quarter of 2017 related to its sale to McGraw is the portion of the total selling price allocated to the irrigation system, which is $312,195.12.

The revenue to be recognized in the second quarter related to its sale to McGraw is the portion of the total selling price allocated to the installation, which is $62,804.88.

Therefore, the revenue to be recognized in the first quarter is $312,195.12, and the revenue to be recognized in the second quarter is $62,804.88.

To know more about installation, refer here:

https://brainly.com/question/13267432#

#SPJ11

Two trade-oriented sales promotions that are exclusively used for business-to-business (B2B) marketing rather than for consumers are cooperative advertising and salesforce training. Option A & D are correct.

Cooperative advertising refers to a promotional strategy where two or more companies collaborate to create and fund an advertising campaign that promotes their products or services together.

This type of promotion is commonly used by manufacturers and wholesalers to help their retailers promote their products. In this case, the cost of the advertising campaign is shared between the manufacturer and the retailer.

Cooperative advertising can help increase sales and build brand awareness for both parties involved.Salesforce training is another B2B promotion that is designed to enhance the skills and knowledge of a company's salesforce.

The salesforce is a critical component of any business that sells products or services. Training can help sales reps develop the necessary skills to sell products more effectively, identify new sales opportunities, and close deals more efficiently. This type of promotion is typically exclusive to B2B companies because consumers do not interact with a salesforce directly.
In summary, cooperative advertising and salesforce training are two trade-oriented sales promotions that are exclusively used for B2B marketing rather than for consumers. These promotions can help increase sales, build brand awareness, and enhance the skills and knowledge of a company's salesforce.  Option A & D are correct.

for more such questions on marketing

https://brainly.com/question/25369230

#SPJ11

An increase in government deficit spending can crowd out private investment by increasing the demand for loanable funds, thereby driving up interest rates.

When the government borrows more, it competes with private investors for the available funds in the credit market, causing the cost of borrowing to increase. As a result, some private investors will be discouraged from borrowing and investing in capital projects, which may reduce economic growth and job creation.

Higher interest rates also make borrowing more expensive for businesses, reducing their ability to invest in new projects and equipment.

This, in turn, can lead to lower productivity, employment, and income. In short, an increase in government deficit spending can lead to a reduction in private investment and slow down economic growth.

To know more about interest rates refer to-

https://brainly.com/question/13324776

#SPJ11

The given assertion " the management of waiting line systems considers the tradeoff between the operating cost of adding capacity and the cost of making customers wait." is true because waiting-for-line system management must strike a balance between these expenses and select a tactic that best suits their corporate objectives and clientele's requirements.

Frameworks for making holding up records are likewise alluded to as lining frameworks are made to adjust the expenses of offering support against the expenses of having clients pause.

Expanding the limit — for instance, by expanding the number of specialist co-ops or broadening the actual space — can abbreviate stand-by times and lift consumer loyalty. The working costs, like those for work, lease, and gear.

Learn more about tradeoff:

https://brainly.com/question/25806501

#SPJ4

Rent control may seem like an ideal solution to make housing more affordable, but it can have unintended consequences. One of these consequences is a decrease in the quality of housing available. Landlords may not have the financial incentive to invest in upkeep and repairs when they are unable to charge market rates for rent.

This could lead to deteriorating conditions in the units, which could potentially be hazardous to tenants' health and safety.Another unintended consequence is a decrease in the supply of available housing. With rent control, landlords may be more likely to convert rental units into condos or other forms of housing that are not subject to the rent control restrictions. This could make it more difficult for renters to find affordable housing options, especially in areas with high demand.

Overall, while rent control may seem like a solution to the housing affordability crisis, it can have unintended consequences that may ultimately harm renters. Policymakers need to consider these consequences when implementing such policies and should explore alternative solutions that address the root causes of the problem.

To know more about rent control click here

brainly.com/question/30820588

#SPJ11

The journal entry to record the tax levy in the governmental activities general journal will include a debit to estimated revenues for $1,600,000 and a credit to revenues for $1,584,000.

The journal entry to record the tax levy in the governmental activities general journal for the town of Cumberland would be as follows:

Debit: Estimated Revenues $1,600,000
Credit: Revenues $1,584,000
Debit: Allowance for Uncollectible Current Taxes $16,000

This entry reflects the $1,600,000 property tax levy, with an estimated 1% ($16,000) being uncollectible. The credit to Revenues reflects the amount expected to be collected, while the debit to Estimated Revenues represents the full amount levied.

Finally, the debit to Allowance for Uncollectible Current Taxes accounts for the estimated amount that will not be collected. No debit to Cash is necessary at this point, as the taxes have not yet been collected.

To know more about tax levy , refer here:

https://brainly.com/question/30040486#

#SPJ11

To know more about balance, refer here :

https://brainly.com/question/27154367#

#SPJ11

The balance in the lease payable account after the April 1, 2021, lease payment is -$6,526 . This means that the lease liability is increased by $6,526.

To calculate the balance in the lease payable account after the April 1, 2021, lease payment, we need to first determine the total amount of lease payments due over the lease term.

Each quarterly rental payment is $16,315, and there are 20 quarters in the lease term, so the total lease payments due over the lease term are:

$16,315 x 20 = $326,300

Next, we need to calculate the amount of each lease payment that represents interest expense and the amount that represents reduction of the lease liability. We can use the effective interest method to do this.

Under the effective interest method, the interest expense for each period is calculated by multiplying the beginning balance of the lease liability by the implicit interest rate. The reduction of the lease liability is the difference between the lease payment and the interest expense.

For the first period, the beginning balance of the lease liability is the total amount of lease payments due over the lease term, which is $326,300.

The interest expense for the first period is:

$326,300 x 12% = $39,156

The reduction of the lease liability for the first period is:

$16,315 - $39,156 = -$22,841 (a negative number indicates an increase in the lease liability)

Therefore, the balance in the lease payable account after the April 1, 2021, lease payment is:

$16,315 - $22,841 = -$6,526 (a negative number indicates an increase in the lease liability)

This means that the lease liability has increased by $6,526 since the beginning of the lease term.

To learn more about lease click on,

https://brainly.com/question/22364057

#SPJ4

Happy Giraffe will pay $2.10 to the underwriter on a per-share basis for each new share of preferred stock that it issues. This is because the underwriting cost is 2.10% of the selling price of the new shares, which is $100 per share.

Preferred stock is a type of stock that pays a fixed dividend and has priority over common stock when it comes to receiving dividends and assets in the event of bankruptcy. In this case, Happy Giraffe's preferred stock pays a dividend of $5.00 per share.

An underwriter is a financial institution or individual that helps companies like Happy Giraffe issue new securities, such as preferred stock. The underwriter buys the new securities from the company and then resells them to investors.

A dividend is a payment made by a company to its shareholders, typically out of its profits. In the case of Happy Giraffe's preferred stock, it pays a fixed dividend of $5.00 per share to its shareholders.

In summary, Happy Giraffe will pay $2.10 to the underwriter on a per-share basis for each new share of preferred stock that it issues. This cost is incurred due to the underwriting (or flotation) cost, which is a fee charged by the underwriter for its services in helping the company issue new securities.

To learn more about preferred stock:

https://brainly.com/question/29411465

#SPJ11

Land, labor, technology, and capital are all modes of production.

Correct option is A.

Production is the process of creating goods and services to be used by consumers and businesses. Land refers to the physical resources used in production, including natural resources, such as land and water, as well as man-made resources, such as buildings and infrastructure. Labor refers to the human effort used to produce goods and services, such as physical labor and mental labor.

Technology refers to the machines, equipment, and tools used to produce goods and services. Finally, capital is the money used to purchase land, labor, and technology, as well as finance production. All of these modes of production are required for businesses to create goods and services that can be used by consumers and businesses.

Correct option is A.

know more about technology here

https://brainly.com/question/28288301#

#SPJ11

complete question is :

Land, labor, technology, and capital are all _____ of production. multiple choice question.

a. modes

b. monetary

c. aspects means

d. generators

If the company wants to minimize risk and maximize returns, it should select Project B over Project A.

The crossover point is the point at which the net present values (NPVs) of two mutually exclusive projects intersect. In other words, it is the discount rate at which the NPV of one project equals the NPV of the other project.

If the required return is less than the crossover point, then Project A is preferred, and if the required return is greater than the crossover point, then Project B is preferred.

In this scenario, the crossover point is 12.3 percent, which means that at a discount rate of 12.3 percent, the NPV of Project A equals the NPV of Project B. Since the required return for Project A is 13.1 percent, which is greater than the crossover point, it implies that Project B is preferred over Project A.

To learn more about projects click on,

https://brainly.com/question/18913595

#SPJ4

Option b is correct. A firm was able to reduce its inventory level while keeping other things constant, we will see a change in accounting an increase in interval measures for liquidity.

The fast ratio, commonly referred to as the acid-test ratio, gauges a company's capacity to settle its immediate liabilities using its most liquid assets. It is computed by dividing a company's current obligations by the total of its cash, accounts receivable, and short-term investments.

Because inventory is not regarded as a liquid asset, lowering inventory levels will cause the quick ratio to rise, signaling an increase in liquidity. Reducing inventory levels will result in a decline because inventory is a current asset.

The current ratio assesses a company's capacity to use its current assets to settle its short-term debts. A company's current ratio is determined by dividing its total current assets by its total current liabilities.

Learn more about Liquidity

https://brainly.com/question/7508821

#SPJ4

Complete question

A firm was able to reduce its inventory level while keeping other things constant, we will see a change in which of the following accounting measures for liquidity?

a. a decrease in quick ratio

b. no change in any liquidity measure

c. a decrease in current ratio

d. an increase in interval measure

e. an increase in cash ratio

Amount will voltac report on its 2020 financial statements are, a. Inventory: $10,000, b. Cost of Goods Sold: $40,000, c. Sales: $96,000, d. Accounts Receivable: $8,400, e. Accounts Payable: $8,400, f. Cash: $7,000.

The cost of inventory purchased on March 1 is 100,000 pesos, which, using the exchange rate of $0.10 per peso on March 1, equals $10,000.

The cost of goods sold is calculated as the cost of the inventory sold. Voltac sold 60% of the inventory for 80,000 pesos on May 1. The cost of the inventory sold is 60% of the total cost of inventory, or 60% x 100,000 pesos = 60,000 pesos. Using the exchange rate of $0.12 per peso on May 1, the cost of goods sold is $7,200.

The amount of sales made on May 1 is 80,000 pesos. Using the exchange rate of $0.12 per peso on May 1, the sales are equal to $9,600.

The accounts receivable on August 1 is calculated as the amount of sales made on May 1 minus the amount collected by August 1. The amount of sales made on May 1 is 80,000 pesos, which, using the exchange rate of $0.12 per peso on May 1, equals $9,600. The amount collected on August 1 is 70,000 pesos, which, using the exchange rate of $0.13 per peso on August 1, equals $9,100. Therefore, the accounts receivable on August 1 is $500 ($9,600 - $9,100).

The accounts payable on September 1 is 60,000 pesos, which, using the exchange rate of $0.14 per peso on September 1, equals $8,400.

The cash balance on December 31 is calculated as the sum of the amount collected on August 1 and the amount collected after August 1 minus the amount paid on September 1. The amount collected on August 1 is 70,000 pesos, which, using the exchange rate of $0.13 per peso on August 1, equals $9,100. The amount collected after August 1 is the amount of sales made on May 1 minus the amount collected by August 1, which is $500 (calculated in part d). Therefore, the total cash balance is $9,600 ($9,100 + $500) minus the amount paid on September 1, which is $8,400 (calculated in part e), for a total of $1,200.

To know more about financial statements, here

brainly.com/question/14951563

#SPJ4

Presenting all costs of an organization as a function of a single independent variable, such as volume of output, can be useful in obtaining a general understanding of cost behavior, but it may not be accurate enough to make specific decisions concerning products, services, or activities for several reasons:

1. Assumptions of linearity: The assumption that costs behave linearly with changes in the independent variable (such as output volume) may not always hold. In reality, many costs are non-linear and may have step costs or non-linear relationships with the independent variable. Thus, using a single independent variable to represent cost behavior may not provide an accurate representation of the underlying costs.

2. Other factors affecting costs: Other factors such as changes in technology, labor rates, inflation, and changes in input prices may also affect costs, making it difficult to accurately predict cost behavior based on a single independent variable.

3. Different cost structures: Different products, services, and activities within an organization may have different cost structures, making it challenging to apply a single cost behavior assumption across the entire organization.

4. Different pricing strategies: Different products or services may have different pricing strategies, which can affect their cost behavior. For example, a company may price some products or services at a premium, which may change the cost behavior of those products compared to others.

Therefore, presenting all costs of an organization as a function of a single independent variable, while useful, may not be accurate enough to make specific decisions concerning products, services, or activities, and a more detailed analysis of the cost structure may be necessary to make informed decisions.

To know more about cost behaviour , refer here :

https://brainly.com/question/30877583#

#SPJ11

The time Jerome spent in the office that day is considered part of the hiring process and is commonly referred to as the second interview or follow-up interview.

During this interview, the company provided more detailed information about the position and what would be expected of Jerome if he were to accept the job offer.

The purpose of the second interview is to provide the candidate with a better understanding of the position and to answer any questions they may have about the company or the job. This interview also gives the company an opportunity to evaluate the candidate's level of interest in the position and to assess their suitability for the role.

During the second interview, Jerome was provided with important information about the company's accounting methods, rules and regulations, and other relevant details. He was also informed about the potential for growth within the company, the social activities available, and the support offered for CPA exam preparation.

Additionally, Jerome was informed about the overtime hours required during tax season and the incentive for passing the CPA exam. This information allows Jerome to make an informed decision about whether he wants to accept the job offer or not, based on a more comprehensive understanding of what the job entails.

Overall, the second interview is an important step in the hiring process, as it provides both the candidate and the company with a clearer picture of what the job entails and what the expectations are.

To know more about hiring process refer here:

https://brainly.com/question/30198867#

#SPJ11

Performance evaluation measures need to be specific and clear Answer is option C.

Performance evaluation is a technique that is used to evaluate and assess the performance of a staff member, employee, or team in a company or an organization. Performance evaluation helps in identifying and evaluating an employee’s performance over a period of time.

The primary objective of performance evaluation is to identify an employee's strengths and weaknesses, and to provide them with appropriate feedback and guidance to improve their performance.

It is also important to have a clear understanding of what performance evaluation measures are. Performance evaluation measures need to be specific and clear. Performance evaluation measures help managers to assess the performance of the employees and provide feedback on what is expected of them.

Thus, the correct option is C) Specific and clear.

You can learn more about Performance evaluation at

https://brainly.com/question/1532968

#SPJ11

Lean manufacturers demand all of these choices from their vendors low cost materials, on-time deliveries, and high-quality materials so all the choices are correct. The correct option is "D".

The principles of lean manufacturing aim to reduce waste and increase efficiency throughout the production process, and this requires close collaboration and coordination with suppliers and vendors.

By demanding low cost materials, on-time deliveries, and high-quality materials, lean manufacturers can ensure that they have the resources they need to operate efficiently and effectively, without being slowed down by delays or quality issues.

The correct option is "D".

To know more about manufacturers, click here.

https://brainly.com/question/14275016

#SPJ4

In general, sensitivity analysis provides information about "how to eliminate uncertainty from a decision". The correct option is B.

The sensitivity analysis is the term which provides information about "how changes in input parameter values affect the outcome or optimal decision." Sensitivity analysis is a technique used to evaluate the effect of variations in input parameters or assumptions on the output of a model or decision.

The reason of using this analysis because it helps identify which inputs have the most significant impact on the outcome and how changes in those inputs may affect the decision or recommendation. Therefore, the correct option is "how changes in input parameter values affect the outcome or optimal decision."

To know more about sensitivity analysis here,

https://brainly.com/question/31310768

#SPJ4

In order to complete a partial five forces analysis for the force assigned, it is important to first understand the scope of the industry. The five forces analysis is a framework developed by Michael Porter that helps to identify the forces that affect an industry's profitability.

It includes five forces that determine the competitive intensity and attractiveness of a market.The five forces include:Threat of new entrants Bargaining power of suppliers Bargaining power of buyers.Threat of substitute products or services .Rivalry among existing competitors Once you have a grasp on the scope of the industry, you can complete a partial five forces analysis for the assigned force. It is important to cover all of the elements of the assigned force covered in the readings.

One may use the appropriate template from the Dobbs's reading to organize their analysis, but this is not required.competitive rivalry, threat of new entrants, threat of substitute products or services, bargaining power of suppliers, or bargaining power of buyers. To conduct the analysis, you can use the appropriate template from Dobbs's reading, although this is not mandatory

Learn more about scope of the industry here:https://brainly.com/question/14746133

#SPJ11

Louisa would have paid approximately $199 in interest over the course of the year.

We can use the formula:

Interest = APR/100 * Balance.

1: Convert the APR (Annual Percentage Rate) to a decimal by dividing it by 100.
APR = 19.9% / 100 = 0.199

2: Multiply the decimal APR by the average balance.
Interest = 0.199 * $1,000
3: Calculate the interest.
Interest = $199

So, Louisa would have paid approximately $199 in interest over the course of the year on her credit card with an average balance of $1,000 and an APR of 19.9%.

Annual Percentage Rate (APR), it is a measure used to represent the annualized interest rate on a loan or financial product. The APR takes into account not only the nominal interest rate but also any additional fees or costs associated with the loan.

Learn more about APR here: https://brainly.com/question/24715857

#SPJ11