No, statistics and quantitative data are not necessarily more valid and objective than qualitative research.
While quantitative data can provide precise numerical measurements, it may not capture the full complexity of a particular phenomenon or experience. Qualitative research, on the other hand, can offer rich and nuanced insights into human behavior and attitudes. It allows for a deeper understanding of the context and meaning behind the data.
Ultimately, the choice between quantitative and qualitative research depends on the research question and the goals of the study. Both methods have their strengths and limitations, and it is important to consider them carefully when designing a study.
Learn more about quantitative data here: https://brainly.com/question/30398777
#SPJ11
6) Determine whether the function f(x) = cos 2x satisfies the conditions π of the Mean Value Theorem on the interval [0,- 1. If so, find the 0 2 noint(s) guaranteed to exist by the theorem.
The MVT guarantees the existence of at least one point c in (0, π) where
f'(c) = -2 sin 2c, which is equal to -2 sin 1.00229.
To apply the Mean Value Theorem (MVT) to the function f(x) = cos 2x on
the interval [0, π], we need to verify the two conditions:
f(x) is continuous on [0, π]
f(x) is differentiable on (0, π)
To check the continuity of f(x) on [0, π], we need to verify that the
function does not have any breaks or jumps on this interval. The cosine
function is continuous everywhere, so f(x) = cos 2x is also continuous on
[0, π].
To check the differentiability of f(x) on (0, π), we need to take the
derivative of f(x) and verify that it exists and is finite on this interval.
The derivative of f(x) = cos 2x is f'(x) = -2 sin 2x. This function is also
continuous everywhere, so it is differentiable on (0, π).
Since both conditions are satisfied, we can apply the MVT to f(x) on the
interval [0, π]. The theorem guarantees the existence of at least one
point c in (0, π) such that:
f'(c) = [f(π) - f(0)] / (π - 0)
Substituting the values for f(x) and f'(x), we get:
-2 sin 2c = [cos 2π - cos 2(0)] / π
-2 sin 2c = (-1 - 1) / π
sin 2c = 1 / π
Since the sine function is positive on (0, π), we know that 0 < 2c < π/2. Therefore, the only solution to sin 2c = 1 / π on this interval is:
2c ≈ 1.00229
for such more question on MVT
https://brainly.com/question/14945144
#SPJ11
Which ray is the terminal side of a 900 degree angle in standard position
The terminal side of a 540 degree angle in standard position will lie on the negative x-axis.
What is Standard Position of an angle ?Standard Position: If an angle's vertex is at its origin and one of its rays is on the positive x-axis, it is in the standard position. The initial side and the terminal side are the names given to the rays along the x-axis.
In standard position, a 900-degree angle will have its initial side along the positive x-axis and its terminal side rotating by 900 degrees counterclockwise.
Since each full counterclockwise revolution compares to a point of 360 degrees, we can take away 360 degrees from 900 degrees to track down the same point inside one full turn:
900 degrees - 360 degrees = 540 degrees
Thus, a 900 degree angle in standard position is equivalent to a 540 degree angle in standard position.
know more about angle visit :
https://brainly.com/question/28451077
#SPJ1
In the screenshot need help with this can't find any calculator for it so yea need help.
The length of side "r" in the triangle PQR is 70.75 m.
What is triangle?A triangle is a three-sided polygon, a basic shape in geometry. It is formed when three straight lines intersect at three points, creating interior angles that add up to 180 degrees. Triangles can be classified according to their sides, angles, and type, such as right-angled, equilateral, and isosceles. Triangles are often used in construction to form roofs, beams, and walls. They are also used in geometry and trigonometry to calculate distances, angles, and areas.
To calculate the length of "r" in a non-right-angled triangle, the Sine Rule can be used. The Sine Rule states that, for any triangle, the ratio of the length of a side to the sine of the opposite angle is the same for all sides.
In the triangle PQR, side "r" is the side opposite angleR. The sine of angleR is 0.53. Therefore, the ratio of the length of "r" to the sine of angleR is:
r/sin R = 37.5/0.53
r = 37.5/0.53 = 70.75 m.
Therefore, the length of side "r" in the triangle PQR is 70.75 m.
To know more about Triangle click-
http://brainly.com/question/22062407
#SPJ1
In a sequence which begins 25, 23, 21, 19, 17,..., what is the term number for the term with a value of -11? A. n = -17 B. n = 1.5 C. n = 17 D. n = 19
At a certain factory, when the capital expenditure is K thousand dollars and L worker-hours of labor are employed, the daily output will be Q = 120K1/2L1/3 units. Currently capital expenditure is $400 000 (K = 400) and is increasing at the rate of $9000 per day, while 1000 worker-hours are being employed and labor is being decreased at the rate of 4 worker-hours per day. At what rate is production currently changing? Is it increasing or decreasing?
dQ/dt is positive, the production is currently increasing at a rate of approximately 4.78 units per day.
To solve the problem, we need to use the multivariable chain rule of differentiation to find the rate of change of Q with respect to time t.
We have:
[tex]Q = 120K^{1/2}L^{1/3}[/tex]
Taking the derivative with respect to time t using the chain rule, we get:
dQ/dt = (dQ/dK)(dK/dt) + (dQ/dL)(dL/dt)
where dQ/dK and dQ/dL are the partial derivatives of Q with respect to K and L, respectively.
Using the chain rule, we can compute these derivatives as follows:
[tex]dQ/dK = 60K^{-1/2}L^{1/3}[/tex]
[tex]dQ/dL = 40K^{1/2}L^{-2/3}[/tex]
Next, we need to find the values of K, L, dK/dt, and dL/dt at the current time.
We are given:
K = 400 + 9t
L = 1000 - 4t
dK/dt = 9
dL/dt = -4
Substituting these values and simplifying, we get:
[tex]dQ/dt = (60/\sqrt{K} )L^{1/3}(dK/dt) + (40/3)(K^{1/2}/L^{2/3})(dL/dt)[/tex]
[tex]dQ/dt = (60/\sqrt{ (400+9t))(1000) } ^{1/3}(9) + (40/3)((400+9t)^{1/2} /(1000-4t)^{2/3})(-4)[/tex]
[tex]dQ/dt = 225(400+9t)^{-1/6} - 80(400+9t)^{1/2}(1000-4t)^{-2/3}[/tex]
Now we can find the value of dQ/dt at the current time t = 0:
[tex]dQ/dt = 225(400)^{−1/6} - 80(400)^{1/2}(1000)^{−2/3}[/tex]
dQ/dt ≈ 4.78.
For similar question on chain rule.
https://brainly.com/question/30396691
#SPJ11
Let f(x,x)=x² + xy+2y72-7x Here we should get x = ____Here we should get y =________ So the critical value is_______
The critical point is x=4 and y=-1;
To find the critical points of f(x, y) = x² + xy + 2y² - 7x, you need to find the partial derivatives with respect to x and y and set them equal to 0.
Partial derivative with respect to x: fx(x, y) = 2x + y - 7
Partial derivative with respect to y: fy(x, y) = x + 4y
Setting both equal to 0:
2x + y - 7 = 0
x + 4y = 0
Solving this system of equations, we get x = 4 and y = -1. So, the critical point is (4, -1).
In summary, the critical point of f(x, y) = x² + xy + 2y² - 7x is (4, -1) with x = 4 and y = -1. To find this, calculate partial derivatives with respect to x and y, set them equal to 0, and solve the system of equations.
To know more about critical point click on below link:
https://brainly.com/question/29144288#
#SPJ11
Classify the events as independent or not independent: Events A and B where the probability of event A occurring is 0.5, the probability of event B occurring is 0.7, and the probability of both event occurring is 0.34.
Events A and B are not independent as the probability of both events occurring together is not equal to the product of their individual probabilities.
Events A and B are considered independent if the occurrence of one event does not affect the probability of the other event occurring. In this case, the probability of event A occurring is 0.5, the probability of event B occurring is 0.7, and the probability of both events A and B occurring is 0.34. Since the probability of both events A and B occurring (0.34) is not equal to the product of the probabilities of each event occurring independently (0.5 * 0.7 = 0.35), Events A and B are not independent.
Therefore, Events A and B are not independent as the probability of both events occurring together is not equal to the product of their individual probabilities.
To learn more about probability here:
brainly.com/question/30034780#
#SPJ11
Convert the answer to dollars and cents. 11 9/10
Answer:
$11.90
Step-by-step explanation:
11 and 9/10 converted to dollars and cents is 11.90
11 is 11 wholes, therefore it stays the same.
1/10 is equal to .10, so 9/10 is equal to .90.
SORRY IF THIS DOESN'T MAKE SENSE!
What is the quotient of 9.2×10^8 and 4.6×10^4 expressed in scientific notation?
The quotient of 9.2×10⁸ and 4.6×10⁴ expressed in scientific notation is 2.0×10⁴.
What is scientific notation?In scientific notation, commonly referred to as exponential notation, very big or very small quantities are expressed by employing powers of 10. in notation used in science. There are several uses for scientific notation. First of all, it enables us to write extremely huge or extremely small numbers in a condensed and readable style. For instance, the about 93,000,000 mile distance between the Earth and the Sun can be difficult to write and manage because it is such a huge quantity.
The quotient is obtained when we divide the two numbers as follows:
9.2×10⁸ ÷ 4.6×10⁴ = 20,000
20,000 = 2.0×10⁴
Hence, the quotient of 9.2×10⁸ and 4.6×10⁴ expressed in scientific notation is 2.0×10⁴.
Learn more about quotient here:
https://brainly.com/question/16134410
#SPJ1
The proof of Euler's formula for ea+bi depends on knowing the Taylor expansions of at least three famous functions.
a. true b. false
Let f(x) = 244. Use logarithmic differentiation to determine the derivative. f'(x) = f'(1) = Calculator Submit Question
The derivative of f(x) = 244 using logarithmic differentiation is f'(x) = 0. To find f'(1), we plug in x = 1 and get f'(1) = 0.
This means that the slope of the tangent line to the graph of f(x) at x = 1 is 0, indicating a horizontal line.
Logarithmic differentiation is a technique used to find the derivative of a function by taking the natural logarithm of both sides of the equation, then differentiating implicitly. In this case, we have f(x) = 244, so ln(f(x)) = ln(244). Differentiating both sides with respect to x gives:
1/f(x) * f'(x) = 0
Simplifying, we get f'(x) = 0. This makes sense because the function f(x) is a constant function, which has a derivative of 0 at every point.
To find f'(1), we plug in x = 1 into f'(x) and get f'(1) = 0. This tells us that the slope of the tangent line to the graph of f(x) at x = 1 is 0, indicating a horizontal line.
To know more about tangent line click on below link:
https://brainly.com/question/31364429#
#SPJ11
Find the first 4 non-zero terms of the Taylor polynomial for f(x) = ln(x + 1) about x = 0.
The first 4 non-zero terms of the Taylor polynomial are f(x) = x - x²/2 + 2x³/3 - x⁴/4 + ...
What is the Taylor series?
The Taylor series is a mathematical representation of a function as an infinite sum of terms that are calculated from the values of the function's derivatives at a single point.
The nth term of the Taylor series for f(x) about x = a is given by:
f^n(a)/n!(x-a)ⁿ
Here, we need to find the first 4 non-zero terms of the Taylor series for f(x) = ln(x+1) about x=0.
f(x) = ln(x+1)
f'(x) = 1/(x+1)
f''(x) = -1/(x+1)²
f'''(x) = 2/(x+1)³
f''''(x) = -6/(x+1)⁴
Now, we can find the Taylor series for f(x) about x=0 as follows:
f(0) = ln(0+1) = 0
f'(0) = 1/(0+1) = 1
f''(0) = -1/(0+1)² = -1
f'''(0) = 2/(0+1)³ = 2
f''''(0) = -6/(0+1)⁴ = -6
So, the first 4 non-zero terms of the Taylor series for f(x) = ln(x+1) about x=0 are:
0 + 1x - 1x²/2 + 2x³/3 - 6x⁴/4!
Simplifying, we get:
f(x) = x - x²/2 + 2x³/3 - x⁴/4 + ...
To know more about the Taylor series visit:
brainly.com/question/30772973
#SPJ1
What are Big O vs. Big Theta vs. Big Omega?
Big O represents the worst-case performance, Big Theta represents the average-case performance, and Big Omega represents the best-case performance of an algorithm.
Big O, Big Theta, and Big Omega are all notations used in computer science to describe the performance of algorithms, specifically their time complexity.
Each notation represents a different aspect of an algorithm's behavior:
1. Big O (O): Big O notation is used to express the upper bound of an algorithm's running time, meaning it describes the maximum number of operations an algorithm might take in the worst-case scenario. In other words, Big O represents the upper limit on how slow an algorithm can be.
2. Big Theta (Θ): Big Theta notation is used to describe the average-case running time of an algorithm. It represents both an upper and lower bound, meaning it gives a tight bound on the number of operations an algorithm takes in the average case. Essentially, Big Theta indicates the general performance of an algorithm.
3. Big Omega (Ω): Big Omega notation is used to express the lower bound of an algorithm's running time, meaning it describes the minimum number of operations an algorithm might take in the best-case scenario. In other words, Big Omega represents the lower limit on how fast an algorithm can be.
Learn more about Big O:
https://brainly.com/question/15234675
#SPJ11
Shareese has a credit line of $3,000 on her credit. Review the summary of her latest credit card statement
The available credit on Shareese's credit card is $$1432.75.
What is the available credit on Shareese's credit card?To find the available credit on Shareese's credit card, we need to subtract her new balance from her credit line.
Shareese's credit line is $3,000 and her new balance is $1,567.25. Therefore, the available credit on her card is:
= $3,000 - $1,567.25
= $1,432.75
Therefore, the available credit on Shareese's credit card is $2,000.
Read more about credit card
brainly.com/question/26857829
#SPJ1
10. The isosceles trapezoid below is composed of three congruent equilateral triangles with side lengths of 6 cm. find the area and perimeter of the trapezoid.
The area and perimeter of the isosceles trapezoid are 83.04cm² and 20.76cm
What Is an isosceles trapezoid?An isosceles trapezoid is a convex quadrilateral with a line of symmetry bisecting one pair of opposite sides.
A trapezoid is a quadrilateral with two unequal parallel lines.
To find the base of one triangle;
Tan 60 = 6/x
1.732 = 6/x
x = 6/1.732
x = 3.46
sin60 = 6/hyp
hyp = 6/0.866
hyp = 6.93
the base = 2x = 2× 3.46 = 6.92cm
Therefore , the top parallel line = 6.92
and the base of the trapezoid = 3× 6.92 = 20.76cm
The perimeter = 6.93+6.93+6.92+20.76
= 41.54cm
Area = 1/2(a+b)h
= 1/2( 6.92+20.76)6
= 27.68×3
= 83.04cm²
learn more about Isosceles trapezoid from
https://brainly.com/question/10644521
#SPJ1
what is the sum of the infinite geometric series? 18 minus 12 plus 8 minus sixteen thirds plus continuing
The sum of the infinite geometric series is 10.8.
First, we need to identify the common ratio (r) between the terms. To do this, divide the second term by the first term, the third term by the second term, and so on:
r = (-12/18) = -2/3
Now, we'll check if the common ratio is the same for other terms:
(8/-12) = -2/3 and (-16/3)/8 = -2/3
Since the common ratio is consistent, we can use the formula for the sum of an infinite geometric series:
S = a / (1 - r)
where S is the sum, a is the first term (18), and r is the common ratio (-2/3).
S = 18 / (1 - (-2/3))
S = 18 / (1 + 2/3)
S = 18 / (5/3)
S = (18 × 3) / 5
S = 54 / 5
S = 10.8
So, the sum of the infinite geometric series is 10.8.
To learn more about geometric series here:
brainly.com/question/4617980#
#SPJ11
A voting method satisfies the top condition provided a candidate can never be among the winners unless it is ranked first by at least one voter. Select all the voting methods that satisfy the top condition Borda Coombs Ranked Choice Plurality with Runoff
The question is asking about which voting methods satisfy the top condition, where a candidate can never be among the winners unless ranked first by at least one voter. The voting methods mentioned are Borda, Coombs, Ranked Choice, and Plurality with Runoff.
The voting methods that satisfy the top condition are Coombs, Ranked Choice, and Plurality with Runoff.
1. Coombs: This method eliminates the candidate with the most last-place votes in each round until a candidate has a majority of first-place votes, thus satisfying the top condition.
2. Ranked Choice:
Also known as Instant Runoff Voting, this method eliminates the candidate with the fewest first-place votes in each round and redistributes their votes until a candidate has a majority, meeting the top condition.
3. Plurality with Runoff:
In this method, if no candidate has a majority of first-place votes, a runoff is held between the top two candidates. Since only first-place votes are considered, the top condition is satisfied.
However, Borda does not satisfy the top condition, as it assigns points based on rank, and a candidate can win without being ranked first by any voter.
To know more about voting methods:
https://brainly.com/question/29552704
#SPJ11
Question 7 10 pts If you flip a coin ten times, which sequence of heads and tails is more likely? HHHHHHHHHH or HTHTHTHTHT (Assume that there is a 0.5 chance of heads on each flip, and that the flips are independent of each other. These assumptions are quite accurate for coin flips.) HHHHHHHHHH HTHTHTHTHT they are equally likely need more information to answer this question
Both sequences, HHHHHHHHHH and HTHTHTHTHT, are equally likely when flipping a coin ten times.
Each coin flip has an independent probability of 0.5 of landing heads or tails, so the probability of getting a sequence of ten heads in a row is (0.5)^10 = 0.0009766 or approximately 0.1%. Similarly, the probability of getting a sequence of five heads followed by five tails is (0.5)^10 = 0.0009766 or approximately 0.1%. Therefore, both sequences have the same probability of occurring, and neither is more likely than the other.
Learn more about probability here:
https://brainly.com/question/30034780
#SPJ11
The average American consumes 81 liters of alcohol per year. Does the average college student consume a different amount of alcohol per year? A researcher surveyed 13 randomly selected college students and ound that they averaged 65.8 liters of alcohol consumed per year with a standard deviation of 24 liters. What can be concluded at the the α=0.01 level of significance? a. For this study, we should use _____. b. The null and alternative hypotheses would be: H0: _____. H1:____.
a. For this study, we should use a t-test because the population standard deviation is unknown, and the sample size is small (n=13).
b. The null and alternative hypotheses would be:
H0: μ = 81 (The average college student consumes the same amount of alcohol as the average American, 81 liters per year.)
H1: μ ≠ 81 (The average college student consumes a different amount of alcohol per year than the average American.)
To perform the t-test, follow these steps:
1. Calculate the t-value:
t = (sample mean - population mean) / (sample standard deviation / √sample size)
t = (65.8 - 81) / (24 / √13)
t = -15.2 / (24 / 3.606)
t = -15.2 / 6.656
t = -2.283
2. Determine the critical t-value for a two-tailed test at α=0.01 level of significance and 12 degrees of freedom (n-1):
Using a t-table or calculator, the critical t-value is approximately ±2.681.
3. Compare the calculated t-value to the critical t-value:
Since -2.283 is not more extreme (less than -2.681 or greater than 2.681), we fail to reject the null hypothesis (H0).
Conclusion: At the α=0.01 level of significance, there is not enough evidence to conclude that the average college student consumes a different amount of alcohol per year than the average American.
Learn more about it here:
https://brainly.com/question/31581929
#SPJ11
The time (in minutes) between arrivals of customers to a post office is to be modelled by the Exponential distribution with mean 0.73 . Please give your answers to two decimal places. Part a) What is the probability that the time between consecutive customers is less than 15 seconds?
The probability that the time between consecutive customers is less than 15 seconds is approximately 0.29 or 29.02% (rounded to two decimal places).
To calculate the probability that the time between consecutive customers is less than 15 seconds using the Exponential distribution with a mean of 0.73 minutes, first convert 15 seconds into minutes.
15 seconds = 15/60 = 0.25 minutes
Next, use the Exponential distribution formula:
P(X ≤ x) = 1 - e^(-λx)
Here, λ is the rate parameter and is equal to 1/mean, which in this case is:
λ = 1/0.73 ≈ 1.37
Now, plug in the values into the formula:
P(X ≤ 0.25) = 1 - e^(-1.37 × 0.25) ≈ 1 - e^(-0.3425)
P(X ≤ 0.25) ≈ 1 - 0.7098 ≈ 0.2902
Know more about probability here:
https://brainly.com/question/30034780
#SPJ11
A taxicab charges $1. 75 for the flat fee and $0. 25 for each mile. Write an inequality to determine how many miles Eddie can travel if he has $15 to spend. $1. 75 + $0. 25x ≤ $15
$1. 75 + $0. 25x ≥ $15
$0. 25 + $1. 75x ≤ $15
$0. 25 + $1. 75x ≥ $15
The inequality ensures that Eddie does not exceed his budget of $15
The correct inequality to find how many miles Eddie can travel if he has $15 to spend is $1.75 + $0.25x ≤ $15 where x represents the number of miles Eddie can travel.
This is a inequality can be solved by subtracting $1.75 from both sides and then dividing by $0.25 and giving,
$0.25x ≤ $13.25 x ≤ 53
So, Eddie can travel up to 53 miles if he has $15 to spend on the taxicab, including the flat fee of $1.75 and the additional $0.25 charge per mile.
Hence, this inequality ensures that Eddie does not exceed his budget of $15.
Learn more about inequality here,
https://brainly.com/question/31381445
#SPJ4
A painting company will paint this wall of a building. The owner gives them the following dimensions: Window A is 6 1/4 ft times 5 3/4 ft. Window B is 3 1/8 times 4 ft. Window C is 9 1/2 ft. Door D is 4 ft times 8 ft. What is the area of the painted part of the wall?
Answer:
1561.813ft32ft²
Step-by-step explanation:
To calculate the area of the wall which we will call the largest rectangle we must calculate the area of all rectangles on the wall and subtract their combined area from the total.
A = l*w
large rectangle 52.5ft * 33ft = 1732.5 ft²
rectangle A 6.25ft * 5.75ft = 35.9375ft²
rectangle B 3.125ft * 4ft = 12.5ft²
square C (9.5ft)² = 90.25ft²
rectangle D 4ft * 8ft = 32ft²
the total area of the wall needed to be painted
1732.5 ft² - 35.9375ft² - 12.5ft² - 90.25ft² - 32ft² = 1561.813ft32ft²
According to a Pew Research Center study, in May 2011, 31% of all American Type numbers in the boxes adults had a smart phone (one which the user can use to read email and surf 10 points the Internet). A communications professor at a university believes this percentage is higher among community college students. She selects 365 community college students at random and finds that 115 of them have a smart phone. Then in testing the hypotheses: H:p=0.31 versus H:p > 0.31, what is the test statistic? . (Please round your answer to two decimal places.)
The test statistic for the hypotheses H₀: p = 0.31 vs H₁: p > 0.31, given 115 out of 365 community college students have a smartphone, is approximately 0.87.
1. Calculate the sample proportion (p-hat): p-hat = 115 / 365 = 0.3151.
2. Determine the null hypothesis proportion (p₀): p₀ = 0.31.
3. Calculate the standard error (SE) for the sample proportion using the null hypothesis proportion: SE = sqrt(p₀ * (1 - p₀) / n) = sqrt(0.31 * (1 - 0.31) / 365) ≈ 0.0282.
4. Calculate the test statistic (z) using the sample proportion, null hypothesis proportion, and standard error: z = (p-hat - p₀) / SE = (0.3151 - 0.31) / 0.0282 ≈ 0.87.
The test statistic is approximately 0.87, which will be used to determine if there is significant evidence to support the professor's claim.
To know more about null hypothesis click on below link:
https://brainly.com/question/19263925#
#SPJ11
What is printed by print(1+3/2*2)
The output of print(1+3/2*2) is 5.0
This is because the order of operations in arithmetic dictates that multiplication and division should be performed before addition and subtraction.
So, first 3/2 is evaluated which gives 1.5, then 1.5 is multiplied by 2 to give 3, and finally, 1 is added to 3 to get the result of 5.0. Hence, 5.0 will be printed by the print (1+3/2*2).
Note that the result is a floating-point number because division between two integers in Python 3. x always results in a float, even if the result is a whole number.
To learn more about print, click here:
https://brainly.com/question/27646993
#SPJ11
Given the cost function C(x) = 1800 – 700x and the demand function p(x) = 150 - 80x – 35x2, the marginal revenue function is: = a) Odr/dx = 150x – 35x3 b) Odr/dx = 150 – 160x – 105x2 = c) Odr/dx = 1650 - 700x2 – 35x3 d) Odr/dx = 1800x - 700r2
The marginal revenue function is the derivative of the revenue function with respect to the quantity x. Since revenue is equal to price times quantity, we can write the revenue function as R(x) = p(x)*x. Therefore, the marginal revenue function is:
dR/dx = dp/dx * x + p(x) * dx/dx
But dx/dx = 1, so we can simplify the above expression as:
dR/dx = dp/dx * x + p(x)
We are given the demand function p(x) = 150 - 80x - 35x^2, so we can find dp/dx by taking the derivative with respect to x:
dp/dx = -80 - 70x
Substituting this into the expression for the marginal revenue function, we get:
dR/dx = (-80 - 70x) * x + (150 - 80x - 35x^2)
Simplifying this expression, we get:
dR/dx = -35x^2 - 10x + 150
Therefore, the marginal revenue function is:
a) Odr/dx = 150x – 35x3 is not correct
b) Odr/dx = 150 – 160x – 105x2 is not correct
c) Odr/dx = 1650 - 700x2 – 35x3 is not correct
d) Odr/dx = 1800x - 700x2 is not correct
The correct answer is:
dR/dx = -35x^2 - 10x + 150
Learn more about marginal revenue function here:
https://brainly.com/question/16965973
#SPJ11
Since 1975 the average fuel efficiency of U. S. Cars and light trucks (SUVS) has increased from 13. 5 to 25. 8 mpg, an increase of over 90%! A random sample of 40 cars from a large community got a mean mileage of 28. 1 mpg per vehicle. The porulation S. D is 4. 7 mpg. Estimate the mean gas mileage
We can be 95% confident that the true mean gas mileage for cars in the large community is at least 24.764 mpg.
To estimate the lower bound of the true mean gas mileage with a 95% confidence level, we can use the one-sample t-test with the formula
Lower bound = x - (tα/2 * (s/√n))
Where
x = sample mean = 25.25
tα/2 = t-value for the 95% confidence level with (n-1) degrees of freedom = 1.998 (from t-table or calculator)
s = population standard deviation = 4.99
n = sample size = 65
Substituting the values, we get
Lower bound = 25.25 - (1.998 * (4.99/√65)) ≈ 24.764
Therefore, we can estimate with 95% confidence that the true mean gas mileage is at least 24.764 mpg.
To know more about confidence interval:
https://brainly.com/question/29680703
#SPJ4
--The given question is incomplete, the complete question is given
" Since 1975 the average fuel efficiency of U.S. cars and light trucks (SUVs) has increased from 13.5 to 25.8 mpg, an increase of over 90%. A random sample of 65 cars from a large community got a mean mileage of 25.25 mpg per vehicle. The population standard deviation is 4.99 mpg. Estimate the lower bound true mean gas mileage with 95% confidence.
Round your answer to 3 decimal places."--
On average you have been using your smartphone for 30 hours on a full charge with a standard deviation of 5 hours. You are planning a road trip and do not have the charge with you. What is the probability that the phone would last the entire trip of 45 hours?
Notes: How would you do this in Excel?
The probability that the phone would last the entire trip of 45 hours is 2.28%
To calculate the probability that the phone would last the entire 45-hour trip:
We need to use the concept of standard deviation and assume that the usage time follows a normal distribution.
Using Excel, we can use the following formula to calculate the probability:
= NORM.DIST (x, mean, standard deviation, cumulative)
Where x is the value we want to test, the mean is the average usage time on a full charge (30 hours), and the standard deviation is 5 hours.
To calculate the probability that the phone will last the entire 45-hour trip,
we need to find the probability that the usage time is greater than or equal to 45 hours.
= NORM.DIST (45, 30, 5, TRUE)
This gives us a probability of 0.0228 or 2.28%. Therefore, there is a very low probability that the phone will last the entire 45-hour trip.
In summary, the probability that the phone will last the entire 45-hour trip is 2.28% based on the assumption that the usage time follows a normal distribution with a mean of 30 hours and a standard deviation of 5 hours.
To know more about Probablity:
https://brainly.com/question/30034780
#SPJ11
if the airline books 70 people on a flight for which the maximum number is 65, what is the probability that the number of people who show up will exceed the capacity of the plane?
Without the individual probability of a passenger showing up, we cannot calculate the exact probability of the number of people who show up exceeding the capacity of the plane
To solve this problem, we need to determine the probability that more than 65 people (the capacity of the plane) will show up from the 70 booked passengers.
Step 1: Identify the relevant information
- Maximum capacity of the plane: 65
- Number of people booked: 70
Step 2: Calculate the probability of each possible outcome
To exceed the capacity, at least 66 passengers must show up. We need to calculate the probability of 66, 67, 68, 69, and 70 passengers showing up. However, we don't have information on the individual probability of a passenger showing up. If we had this information, we could use the binomial probability formula.
Step 3: Express the final answer
Unfortunately, without the individual probability of a passenger showing up, we cannot calculate the exact probability of the number of people who show up exceeding the capacity of the plane. Please provide the probability of a passenger showing up so we can give you an accurate answer.
Learn more about probability here:
https://brainly.com/question/27992840
#SPJ11
Find the maximum and minimum values achieved by f(x) =x3 − 9x2 + 15x + 18 on the interval [0,6]
The maximum value achieved by f(x) on the interval [0,6] is 21, which occurs at x=3. The minimum value is -12, which occurs at x=0 and x=6.
To find these values, we take the derivative of f(x), set it equal to zero, and solve for x. We then plug in the values of x and evaluate f(x) to find the corresponding maximum and minimum values.
Since the derivative is positive to the left of x=3 and negative to the right, we know that we have a maximum value at x=3.
Similarly, since the derivative is negative to the left of x=0 and positive to the right of x=6, we know that we have minimum values at x=0 and x=6. The graph of f(x) also confirms these results.
To know more about derivative click on below link:
https://brainly.com/question/25324584#
#SPJ11
The time between failures of our video streaming service follows an exponential distribution with a mean of 20 days. Our servers have been running for 15 days, What is the probability that they will run for at least 55 days? (clarification: run for at least another 40 days given that they have been running 15 days). Report your answer to 3 decimal places.
The time between failures of our video streaming service follows an exponential distribution with a mean of 20 days. Our servers have been running for 15 days. The probability that the servers will run for at least another 40 days, given that they have been running for 15 days, is approximately 0.135, or 13.5% when reported to 3 decimal places.
Given that the time between failures of your video streaming service follows an exponential distribution with a mean of 20 days, we can find the probability that the servers will run for at least 55 days, given that they have been running for 15 days already.
Step 1: Identify the parameters.
The mean of the exponential distribution is 20 days. This means that the rate parameter (λ) is the reciprocal of the mean:
λ = 1/20
Step 2: Calculate the remaining time until the desired target (55 days).
Since the servers have been running for 15 days, we want to find the probability that they will run for at least another 40 days (55 - 15).
Step 3: Use the exponential distribution probability formula.
The probability density function (pdf) of an exponential distribution is given by:
P(x) = λ * [tex]e^{(-λx)}[/tex]
However, we want to find the probability of the servers running for at least another 40 days, so we need the complementary cumulative distribution function (1 - CDF), which is:
P(X ≥ x) = [tex]e^{(-λx)}[/tex]
Step 4: Plug in the values and solve for the probability.
P(X ≥ 40) = [tex]e^{(-λ * 40)}[/tex] = [tex]e^{(-1/20 * 40)}[/tex]
P(X ≥ 40) ≈ [tex]e^{(-2)}[/tex] ≈ 0.135
The probability that the servers will run for at least another 40 days, given that they have been running for 15 days, is approximately 0.135, or 13.5% when reported to 3 decimal places.
To leran more about probability, refer:-
https://brainly.com/question/30034780
#SPJ11
