(A)Nitrification(B)Denitrification(C)Assimilation(D)Ammonification(E)Nitrogen fixationAmmonia is converted to nitrite, then to nitrateABCDE

To determine the electronic configuration of the Co(II) center found in vitamin B12, please follow these steps:

1. Identify the atomic number of cobalt (Co): The atomic number of cobalt is 27, which means it has 27 electrons in its neutral state.

2. Write the electronic configuration of the neutral cobalt atom: The electronic configuration of cobalt is [Ar] 4s2 3d7, where [Ar] represents the electron configuration of the argon core.

3. Determine the charge of the Co(II) ion: Since it is a Co(II) ion, it has lost 2 electrons and now has 25 electrons.

4. Write the electronic configuration of the Co(II) ion: To account for the loss of 2 electrons, remove them from the outermost shell. The new configuration is [Ar] 4s0 3d7 or simply [Ar] 3d7.

In conclusion, the electronic configuration of the Co(II) center found in vitamin B12 is [Ar] 3d7.

To know more about electronic configuration of the Co(II) :

https://brainly.com/question/19863670

#SPJ11

To deploy configuration profiles for computers from Jamf Pro, the Apple Push Notification service (APNs) must be available.

APNs is a cloud-based service provided by Apple that enables the secure transfer of data between Apple devices and servers. It is essential for communication between Jamf Pro and Apple devices during the deployment of configuration profiles.

APNs is used to initiate the connection between the devices and Jamf Pro, allowing for the transfer of the configuration profiles. Without APNs, it would be impossible to deploy configuration profiles to Apple devices using Jamf Pro.

Therefore, it is critical to ensure that APNs is available and functioning correctly before attempting to deploy configuration profiles using Jamf Pro.

To learn more about : Apple

https://brainly.com/question/13148332

#SPJ11

The technician needs to measure 2.6 mL of the concentrated hydrochloric acid solution and then add enough water to make a final volume of 250 mL to prepare a 0.125 M solution of hydrochloric acid.

To prepare a 0.125 M solution of hydrochloric acid (HCl) using a 12.0 M stock solution, the chemistry technician will need to dilute the concentrated solution. The dilution equation can be used to calculate the volume of the concentrated solution required:

C1V1 = C2V2

where C1 is the concentration of the concentrated solution, V1 is the volume of the concentrated solution, C2 is the desired concentration of the diluted solution (0.125 M), and V2 is the desired volume of the diluted solution (250 mL).

Substituting the given values into the equation, we get:
(12.0 M) V1 = (0.125 M) (250 mL)
Solving for V1, we get:
V1 = (0.125 M) (250 mL) / (12.0 M)
V1 = 2.60 mL (rounded to two decimal places)

Therefore, the chemistry technician will need to measure out 2.60 mL of the 12.0 M hydrochloric acid solution and add it to a volumetric flask. The flask should then be filled with distilled water up to the 250 mL mark, and the solution should be mixed well to ensure uniformity.

To know more about how to calculate molarity, please click on:

https://brainly.com/question/13386686

#SPJ11

The given statement," Global warming is due to the greenhouse gases preventing heat from Earth escaping into space" is true.

Generally greenhouse gases act similarly as the glass in a greenhouse as they absorb the sun's heat that radiates from the Earth's surface, and these effect traps it in the atmosphere and prevent it from escaping into space. Basically, the greenhouse effect keeps the Earth's temperature warmer than it would otherwise be, supporting life on Earth.

Generally these heat-trapping gases can be recognized as a blanket wrapped around Earth, keeping the planet heat than it would be without them. Some of the examples of greenhouse gases are carbon dioxide, methane, nitrous oxides, and water vapor.

Learn more about greenhouse effect from the link given below.

https://brainly.com/question/1314905

#SPJ4

The observation we would expect to upon the reaction of hydrochloric acid with sodium bicarbonate is bubbles and heat.

When hydrochloric acid reacts with sodium bicarbonate, we would expect to observe the following:

Bubbles: Sodium bicarbonate and hydrochloric acid combine to form carbon dioxide gas, which is visible as bubbles in the solution.

Heat: Exothermic meaning that heat is released during the process. As a result, a minor rise in temperature is to be expected.

No precipitation: As a result of this reaction, sodium chloride, carbon dioxide, and water are produced. Since none of these are insoluble in water, there shouldn't be any precipitation.

Therefore, the correct options are bubbles and heat.

To know more about the hydrochloric acid refer here :

https://brainly.com/question/15231576#

#SPJ11

The type of bonding that occurs in iron(III) chloride, FeCl₃ is ionic.

In ionic bonding, there is a transfer of electrons from one atom to another, resulting in the formation of positively charged cations and negatively charged anions.

In the case of FeCl₃, iron (Fe) loses three electrons to chlorine (Cl) atoms, resulting in the formation of Fe³⁺ cations and Cl⁻ anions. The resulting attraction between the oppositely charged ions forms an ionic bond. This is supported by the fact that FeCl₃ is a solid at room temperature and has a high melting and boiling point, which are typical properties of ionic compounds.

In contrast, covalent bonding involves the sharing of electrons between atoms, while metallic bonding involves a lattice of positively charged metal ions in a sea of delocalized electrons.

To know more about type of bonding, refer here:
https://brainly.com/question/29794370#
#SPJ11

The Born-Haber cycle for RbCl. Here are the steps with their endothermic or exothermic nature identified:

1. Sublimation of rubidium Rb(s) → Rb(g): Endothermic
2. Dissociation of the chlorine molecule Cl2(g) → 2 Cl(g): Endothermic
3. Ionization of rubidium Rb(g) → Rb+(g) + e-: Endothermic
4. Electron affinity of chlorine Cl(g) + e- → Cl- (g): Exothermic
5. Formation of RbCl from its ions Rb+(g) + Cl-(g) → RbCl(s): Exothermic

For the overall reaction of Rb(s) + 1/2 Cl2(g) → RbCl(s), to determine if it's endothermic or exothermic, we need to sum up the energy changes from the steps in the Born-Haber cycle.

Since steps 1, 2, and 3 are endothermic, they require energy to occur. Steps 4 and 5 are exothermic, which means they release energy. The overall reaction will be exothermic if the energy released in the exothermic steps is greater than the energy required in the endothermic steps.

In this case, the overall reaction Rb(s) + 1/2 Cl2(g) → RbCl(s) is exothermic, as the energy released in steps 4 and 5 is greater than the energy required in steps 1, 2, and 3.

To know more about endothermic refer here:

https://brainly.com/question/31214950#

#SPJ11

The number of moles of CO₂ that are produced from the combustion of 6. 40 mol C₃H₈ is 19.2 moles.

Generally Combustion reactions is defined as the reactions that occur as oxygen reacts with another element and emits heat and light.

The balanced chemical reaction is given as:

C₃H₈ + 4 O₂ ➞ 3 CO₂ + 5 H₂O

From the reaction it is clear that 1 mole of propane produces 3 moles of carbon dioxide.

So, 6.40 moles of propane will produce carbon dioxide = 3 × 6.40 moles = 19.2 moles of carbon dioxide.

Hence, the number of moles of CO₂ that are produced from the combustion of 6. 40 mol C₃H₈ is 19.2 moles.

Learn more about combustion from the link given below.

https://brainly.com/question/30179464

#SPJ4

The best choice to prepare a buffer with a pH of 9.0 is option b. C5H5N, C5H5NHCl (pkb for C5H5N is 8.76).

To make a buffer solution we can,

1. First, we need to find the corresponding pKa values for the given compounds. We can do this using the formula pKa = 14 - pKb.
a. NH3, NH4Cl: pKa = 14 - 4.75 = 9.25
b. C5H5N, C5H5NHCl: pKa = 14 - 8.76 = 5.24
c. HNO2, NaNO2: pKa = 3.33 (already given)
d. HCHO2, NaCHO2: pKa = 3.74 (already given)

2. To find the best buffer for a pH of 9.0, we need to choose a compound with a pKa value close to the desired pH. The Henderson-Hasselbalch equation states that pH = pKa + log([A-]/[HA]), where [A-] and [HA] are the concentrations of the conjugate base and weak acid, respectively. A good buffer has a pKa value close to the desired pH so that the ratio of [A-] to [HA] can be adjusted to achieve the target pH.

3. Comparing the pKa values of the given compounds to the desired pH of 9.0, we see that option b, C5H5N, C5H5NHCl, has the pKa value closest to 9.0 (5.24). Therefore, this compound would be the best choice to prepare a buffer with a pH of 9.0.

To know more about Buffer Solution:

https://brainly.com/question/24262133

#SPJ11

The formula for sulfurous acid is A) H2SO3.

Sulfurous acid is a weak acid that is formed when sulfur dioxide (SO2) dissolves in water. The sulfur dioxide reacts with water to form sulfurous acid, which can then ionize to produce hydrogen ions (H+) and sulfite ions (SO32-).

The balanced chemical equation for the formation of sulfurous acid is:

SO2 + H2O → H2SO3

As you can see from this equation, one molecule of sulfur dioxide reacts with one molecule of water to form one molecule of sulfurous acid.

The formula for sulfurous acid reflects the fact that there are two hydrogen ions (H+) and one sulfite ion (SO32-) in the molecule. Therefore, the formula is H2SO3, with the subscript 2 indicating that there are two hydrogen ions in the molecule.

So once again, you are correct that the formula for sulfurous acid is A) H2SO3.

To learn more about molecule, refer below:

https://brainly.com/question/19922822

#SPJ11

The calculation which would have its result reported to the greater number of significant digits is a.) 3 + (15/12)

To determine which calculation would have its result reported to the greater number of significant digits, let's perform both calculations and consider the rules for significant digits in each operation.


Step 1: Calculate the value inside the parentheses: 15/12 = 1.25 (rounded to two significant digits since both 15 and 12 have two significant digits)
Step 2: Perform the addition: 3 + 1.25 = 4.25
The result has three significant digits.

b.) (3+15)/12
Step 1: Calculate the value inside the parentheses: 3 + 15 = 18 (with two significant digits)
Step 2: Perform the division: 18/12 = 1.5 (rounded to two significant digits since both 18 and 12 have two significant digits)
The result has two significant digits.

Your answer:  a.) 3 + (15/12) would have its result reported to the greater number of significant digits, as it has three significant digits compared to two in calculation b.) (3+15)/12.

To know more about significant refer here:

https://brainly.com/question/1658998#

#SPJ11

The correct answer is C) chlorine monoxide.The naming of binary compounds containing non-metals follows a specific convention.

The first element in the formula is named first, using its elemental name. The second element is named second, changing the ending of its elemental name to "-ide."

In this case, ClO is a binary compound consisting of the elements chlorine (Cl) and oxygen (O). Since chlorine is listed first, it is named first. The prefix "mono-" is used to indicate that there is only one atom of each element in the compound.

The second element, oxygen, is named second and its ending is changed to "-ide." Therefore, the correct name for ClO is chlorine monoxide.

A) Chlorite is the name of a polyatomic ion, which contains chlorine and oxygen, but has a different chemical formula and charge.

B) Hypochlorite is also the name of a polyatomic ion that contains chlorine and oxygen, but again, it has a different chemical formula and charge.

D) Chlorine (II) oxide is not a correct name for ClO, as it implies that chlorine has a +2 oxidation state, which is not the case in this compound.

learn more about chlorine monoxide here:

https://brainly.com/question/28297915?utm_source=android&utm_medium=share&utm_campaign=question

#SPJ11

The approximate molarity of the solution prepared by the instructor is 0.1 M. The correct answer is option a.

To find the approximate molarity of the NaOH solution, we have to

Calculate the number of moles of NaOH:
  - Find the molar mass of NaOH: (22.99 g/mol for Na) + (15.999 g/mol for O) + (1.007 g/mol for H) = 39.996 g/mol
  - Divide the mass of NaOH by its molar mass: 8 g / 39.996 g/mol ≈ 0.2 mol

Calculate the volume of the solution in liters:
  - Convert the volume of water to liters: 2 L

Calculate the molarity of the solution:
  - Divide the number of moles of NaOH by the volume of the solution in liters: 0.2 mol / 2 L = 0.1 M

Therefore, 0.1 M is the approximate molarity of the NaOH solution prepared by the instructor , which is option a.

For more such questions on molarity, click on:

https://brainly.com/question/14469428

#SPJ11

We need to understand the reaction that the glucose meter is measuring. Reaction 2 likely involves the oxidation of glucose to produce electrons, which are then measured by the glucose meter.

We are given that 0.67 μmol of electrons were measured. To find the mass of glucose present in the sample, we can use stoichiometry to relate the number of electrons produced to the amount of glucose consumed.

The balanced reaction for the oxidation of glucose is:

C6H12O6 + 6O2 → 6CO2 + 6H2O + energy

We can see that for every glucose molecule oxidized, 6 electrons are produced. Therefore, the number of moles of glucose present in the sample is:

0.67 μmol / 6 = 0.112 μmol

To convert this to mass, we can use the molar mass of glucose:

0.112 μmol x 180 μg/μmol = 20.16 μg

Therefore, there were approximately 20.16 μg of glucose present in the sample.

to learn more about glucose

https://brainly.com/question/8880586

#SPJ11

Answer:

The correct answer is:

b) Solution.

Sea water is considered a solution because it is a homogeneous mixture of water (solvent) and various dissolved salts, minerals, and other substances (solutes) in which the solutes are uniformly distributed throughout the water.

Double-check for urself! ;D

The balanced half-reaction is:  NO2- + 4H+ + 2e- → NH4+. To balance the half-reaction of NO2- → NH4+, we first need to determine the missing coefficients. On the reactant side, we have one nitrogen atom and two oxygen atoms. On the product side, we have one nitrogen atom and four hydrogen atoms.

To balance the number of nitrogen atoms, we need a coefficient of 1 on both sides. To balance the number of hydrogen atoms, we need a coefficient of 4 on the product side. Finally, to balance the number of oxygen atoms, we need a coefficient of 2 on the reactant side.

For more such questions on Balancing equation, visit:

brainly.com/question/7181548

#SPJ11

In the amino acid (AA) sequence of collagen, every third position must be occupied by glycine. Collagen is a structural protein, and its unique structure is due to the regular occurrence of glycine at the third position of its amino acid sequence.

Glycine (Gly) must occupy every third place in the AA (amino acid) sequence of collagen. This is due to the fact that glycine is the smallest amino acid and enables the close packing of collagen molecules, which is required for the development of collagen's distinctive triple helix structure.

The other two sites can be filled by any of the remaining 18 amino acids, although proline and hydroxyproline are frequently found there because they help the triple helix structure become more stable by forming hydrogen bonds.

To know more about the glycine refer here :

https://brainly.com/question/30689099#

#SPJ11

Raoult's law is not likely to hold true for solutions of acetone and chloroform due to the hydrogen bonding between the two components, which leads to non-ideal solution behavior.

- Raoult's law states that the vapor pressure of a component in an ideal solution is proportional to its mole fraction in the solution. However, in the case of acetone and chloroform, the presence of hydrogen bonding between the two liquids can affect the extent to which Raoult's law holds true.

- The hydrogen bonding between chloroform and acetone would decrease the vapor pressure of each component in the solution, as hydrogen bonding increases the attraction between the molecules and makes it harder for them to escape into the gas phase. As a result, the vapor pressure of the solution would be lower than what would be expected from Raoult's law.

- Therefore, Raoult's law is not likely to hold true for solutions of acetone and chloroform due to the presence of hydrogen bonding. Instead, the solution would exhibit non-ideal behavior and the vapor pressure would be lower than expected.

To learn more about why chloroform (CHCl3) and acetone((CH3)2CO) exhibits a negative deviation from Raoult's law visit: https://brainly.com/question/14756968

#SPJ11

The medication can treat people who have the disease described. According to the commercial, the drug has FDA approval to treat a condition whose symptoms are listed.

Additionally, the narrator notes that the medication only comes with a prescription and has 1% of the active substance. We can deduce from this information that the drug can effectively treat persons who have the condition generating these symptoms, but obtaining it requires a prescription. The commercial provides no support for the other possibilities.

Therefore, the correct option is D.

Learn more about Medication, here:

https://brainly.com/question/11098559

#SPJ1

Hydration is a specific example of the phenomenon known generally as a. solvation

The act of hydrating involves combining or dissolving an object in water. It is a particular instance of the more general phenomena known as solvation, which is the process by which solvent molecules surround and scatter a solute to create a homogeneous solution. However, hydration explicitly refers to solvation with water as the solvent.

Solvation may also happen with solvents other than water. Solvation is the process through which a solute and solvent interact to stabilise a solute species. Due to its impact on the solubility, reactivity, and behaviour of compounds in solution, solvation is a crucial mechanism in many chemical and biological processes.

Read more about solvation on:

https://brainly.com/question/530845

#SPJ4

The equation that would be used to calculate the mass of calcium deposited in 30.0 seconds using a current of 2.0 A is Faraday's law of electrolysis.

The law states that the amount of substance produced at an electrode during electrolysis is directly proportional to the amount of electrical charge passed through the electrode. The equation for the law is:

Amount of substance = (Electric current x Time x Atomic mass) / (Number of electrons x Faraday's constant)

Using the values given in the question, the atomic mass of calcium is 40.08 g/mol, the number of electrons involved in the reduction reaction is 2, and the Faraday's constant is 96,485 C/mol. Plugging these values into the equation, we get:

Amount of substance = (2.0 A x 30.0 s x 40.08 g/mol) / (2 x 96,485 C/mol)
= 0.0195 g

Therefore, the mass of calcium deposited on the electrode in 30.0 seconds using a current of 2.0 A is 0.0195 g.

To know more about Faraday's law refer here:

https://brainly.com/question/1640558#

#SPJ11

Thus, all in all of this discussion, the alpha helices and beta pleated sheets are formed when the protein chains fold into a specific three-dimensional shape. These structures are stabilized by hydrogen bonds between the amino acid residues of the protein.

Alpha helices form when the protein chain twists into a spiral shape, with hydrogen bonds forming between the carbonyl group of one amino acid residue and the amine group of another.

Beta-pleated sheets, on the other hand, form when the protein chain folds back on itself, with hydrogen bonds forming between adjacent strands. These structures play an important role in protein function, as they help to stabilize the protein and allow it to carry out its biological functions.

Additionally, mutations or changes in the amino acid sequence of a protein can lead to changes in the structure and stability of these secondary structures, which can in turn affect protein function.

What is the primary driving force behind the formation of alpha helices and beta-pleated sheets in proteins?

A. Ionic bonding between amino acid residues

B. Hydrophobic interactions between amino acid side chains

C. Hydrogen bonding between the carbonyl oxygen and the amide hydrogen of the protein backbone

D. Van der Waals interactions between amino acid residues

Correct option: C. Hydrogen bonding between the carbonyl oxygen and the amide hydrogen of the protein backbone.

To know more about alpha helices refer here:

https://brainly.com/question/29459473#

#SPJ11

The weight range of general-purpose bombs currently in production varies from 100 pounds to 2,000 pounds.

General-purpose bombs, also known as GP bombs, are a type of explosive weapon that are designed to be versatile and effective against a wide range of targets.

They are typically dropped from aircraft and are capable of causing significant damage to ground targets such as buildings, vehicles, and personnel. GP bombs are available in a variety of sizes and weights, ranging from small 100-pound bombs to much larger 2,000-pound bombs.

The specific weight range of GP bombs in production can vary depending on the country and manufacturer. For example, in the United States, the Mark 80 series of GP bombs includes the 500-pound Mark 82, the 1,000-pound Mark 83, and the 2,000-pound Mark 84.

Other countries may have different weight ranges for their GP bombs. The weight of a GP bomb can affect its range, accuracy, and explosive power, so choosing the right size bomb for a given mission is an important consideration for military planners.

To know more about general-purpose bombs, refer here:
https://brainly.com/question/31606158#
#SPJ11

Water-double solutes (a solution with double the amount of solute dissolved in it) is more concentrated than water.

Water-double solutes (a solution with double the amount of solute dissolved in it) is more concentrated than water. This can have various effects depending on the nature of the solute and the purpose of the solution. For example, in medical contexts, a more concentrated solution may be used to increase the effectiveness of a medication, while in industrial applications, a more concentrated solution may be more efficient or cost-effective in a chemical process.

However, it is important to note that increasing the concentration of a solute can also have negative effects, such as increased toxicity or reduced solubility, which may impact the safety or stability of the solution.

Learn more about Concentration

brainly.com/question/16445586

#SPJ11

Graphical methods can be used to determine the order of reaction, For a first-order reaction, the plot of ln([A]) versus time will be a straight line, For a second-order reaction, the plot of 1/[A] versus time will be a straight line, For a zero-order reaction, the plot of [A] versus time will be a straight line.

Graphical methods can be used to determine the order of a reaction and its rate constant from a series of data that includes the concentration of the reactant at varying times. These methods involve plotting the concentration of the reactant versus time or using the integrated rate law to plot ln([A]t/[A]0) or 1/[A]t versus time. The order of the reaction can be determined from the slope of the plot, and the rate constant can be calculated from the slope or intercept of the plot.

Graphical methods are commonly used to determine the order of a reaction and its rate constant. One such method involves plotting the concentration of the reactant as a function of time.

For a first-order reaction, the plot of ln([A]) versus time will be a straight line, with a slope equal to -k, the rate constant for the reaction. The order of the reaction can be determined from the slope of the plot.

For a second-order reaction, the plot of 1/[A] versus time will be a straight line, with a slope equal to k, the rate constant for the reaction. Again, the order of the reaction can be determined from the slope of the plot.

For a zero-order reaction, the plot of [A] versus time will be a straight line, with a slope equal to -k, the rate constant for the reaction. In this case, the concentration of the reactant does not change with time, so the reaction rate is independent of the concentration of the reactant.

To read more about zero-order reaction:

https://brainly.com/question/28814050

#SPJ4

The Gibbs free energy for the reaction Mg(s) + N₂O(g) → MgO(s) + N₂(g) is -465.6 kJ/mol. The correct option among the given choices is c.

To find ΔG for the given reaction, we can use the equation:

ΔG_rxn = ΣnΔG°f(products) - ΣmΔG°f(reactants)

where ΔG°f is the standard free energy of formation, and n and m are the stoichiometric coefficients of the products and reactants, respectively.

Plugging in the given values, we get:

ΔG_rxn = [ΔG°f(MgO) + ΔG°f(N₂)] - [ΔG°f(Mg) + ΔG°f(N₂O)]

ΔG_rxn = [(-569.3 kJ/mol) + 0] - [(0) + (103.7 kJ/mol)]

ΔG_rxn = -465.6 kJ/mol

Therefore, the ΔG for the reaction Mg(s) + N₂O(g) → MgO(s) + N₂(g) is -465.6 kJ/mol. The answer is (c).

To know more about Gibbs free energy, refer here:
https://brainly.com/question/13318988#
#SPJ11

The empirical formula for Hg₂(NO₃)₂ is B) Hg(NO₃)₂. The answer is A)

To determine the empirical formula of a compound, we need to find the simplest whole-number ratio of atoms in the compound.

In this case, we have two mercury atoms (Hg₂), and two nitrate ions (NO₃)₂. To simplify, we can divide each by two, giving us one Hg atom and one NO₃ ion.

The formula for nitrate is NO₃⁻, which means it has one nitrogen atom (N) and three oxygen atoms (O). So, one NO₃ ion contains one N atom and three O atoms.

Therefore, the empirical formula for Hg₂(NO₃)₂ is Hg(NO₃)₂, which represents one mercury atom and two nitrate ions, each containing one N atom and three O atoms.

To know more about empirical formula, refer here:
https://brainly.com/question/14044066#
#SPJ11

To determine if a precipitate will form, we need to calculate the reaction quotient Q and compare it to the solubility product constant Ksp. The balanced chemical equation for the reaction is:

Al(OH)3 (s) ⇌ Al3+ (aq) + 3OH- (aq)

The concentrations of Al3+ and OH- in the solution are given as 2.0 x 10-10 M and 2.0 x 10-8 M, respectively. Therefore, the reaction quotient Q can be calculated as:

Q = [Al3+][OH-]^3 = (2.0 x 10^-10)(2.0 x 10^-8)^3 = 3.2 x 10^-32

Since Q is less than the Ksp of Al(OH)3, which is 1 x 10^-33, we can conclude that a precipitate will not form. Therefore, the answer is A. Q > Ksp and a precipitate will not form.

To know more about precipitate :

https://brainly.com/question/29762381

#SPJ11

A higher Km indicates low affinity of the enzymes for its substrate.

The rate of reaction involving an enzyme is greatly influenced by temperature, pH, concentration of the substrate, and a number of other factors.

The substrate concentration needed for half-maximum velocity (1/2 Vmax) is called the Km value (Michaelis constant) and is expressed in units of substrate concentration (moles per liter or M).

Km may be considered an approximate measure of affinity of an enzyme for its substrate: the lower the Km, the higher is the affinity.

Learn more about Km( Michaelis Constant), here:

https://brainly.com/question/25657597

#SPJ4