An unknown vapor had a mass of 0.846g the volume was 354 cm3, pressure 752 torr and temp 100 degrees c. The molar mass of the unknown vapor is 69.92 g/mol.
Given:
Mass = 0.846 g
Volume = 354 cm³
= 0.354 L
(since 1 L = 1000 cm³)
Pressure = 752 torr
Temperature = 100 degrees Celsius
= 373.15 K
1 atm = 760 torr
Pressure = 752 torr / 760 torr/atm
= 0.9895 atm
PV = nRT
Where:
P = Pressure
V = Volume
n = Number of moles
R = Ideal gas constant
T = Temperature
Rearrange the ideal gas law equation to solve for n (number of moles)
n = PV / RT
Substituting the given values:
n = (0.9895 atm) (0.354 L) / [(0.0821 L·atm/(mol·K))(373.15 K)]
n = 0.0121 moles
Molar mass (M) = Mass / Number of moles
M = 0.846 g / 0.0121 mol
M = 69.92 g/mol
To learn more about the molar mass, follow the link:
https://brainly.com/question/31545539
#SPJ12
Identify general features of a lithium-ion battery. Select all that apply.Lithium ion batteries produce almost three times the voltage as nickel-metal hydride batteries.The electrodes are separated by an organic electrolyte that allows Li+ to migrate from anode to cathode.These batteries have a very high energy density.
Features that apply to lithium-ion battery are:
2. The electrodes are separated by an organic electrolyte that allows Li+ to migrate from anode to cathode.
3. These batteries have a very high energy density.
The statement "Lithium ion batteries produce almost three times the voltage as nickel-metal hydride batteries" is not a general feature of lithium-ion batteries, as voltage output can vary depending on the specific design and application of the battery.
Secondly, in lithium-ion batteries, the electrodes are separated by an organic electrolyte, which enables the migration of Li+ ions from the anode to the cathode during discharging and vice versa during charging. Therefore, statement 2 is also correct.
Lastly, lithium-ion batteries are known for their high energy density. They can store more energy in a given volume or weight compared to other rechargeable batteries like nickel-metal hydride or nickel-cadmium batteries. This makes them an ideal choice for many applications such as portable electronics and electric vehicles. So, statement 3 is correct as well.
Learn more about batteries : https://brainly.com/question/26466203
#SPJ11
95) What is the empirical formula of a substance that contains 2.64 g of C, 0.444 g of H, and 7.04 g of O?A) CH2O2B) C2H4O2C) C2H4O3D) C3H4O4E) C4H8O2
The empirical formula of the substance that contains the 2.64 g of C, the 0.444 g of H, and 7.04 g of O is CH₂O₂. The correct option is A.
The mass of the carbon, C = 2.64 g
The mass of the hydrogen, H = 0.444 g
The mass of the oxygen, O = 7.04 g
The number of the moles = mass / molar mass
The number of moles of carbon = 2.64 / 12
The number of moles of carbon = 0.22 mol
The number of moles of hydrogen = 0.444 / 1
The number of moles = 0.444 mol
The number of moles of oxygen = 7.04 / 16
The number of moles of oxygen = 0.44 mol
Dividing by smallest, we get :
Moles of C = 1
Moles of H = 2
Moles of O = 2
The empirical formula of the compound is CH₂O₂. The option A is correct.
To learn more about empirical formula here
https://brainly.com/question/14044066
#SPJ4
which type of burn causes extensive tissue damage from liquefaction necrosis? a. chemical burn from an acid b. thermal burn from scalding c. thermal burn from an explosion d. chemical burn from an alkali
Thermal burns from scalding or explosions can cause tissue damage through other mechanisms, such as direct heat transfer or shock waves, but they do not typically result in liquefaction necrosis.
What is Liquefaction?
Liquefaction refers to the process by which a solid substance is transformed into a liquid state. This can occur through various mechanisms, such as increasing the temperature of a solid material beyond its melting point or applying external forces that disrupt the intermolecular forces holding the solid together.
The type of burn that causes extensive tissue damage from liquefaction necrosis is a chemical burn from an alkali. Alkali burns are particularly dangerous because they can cause rapid tissue destruction and liquefaction necrosis due to the alkaline substance's ability to penetrate deeply into tissues and react with fatty acids in cell membranes.
Learn more about Liquefaction
brainly.com/question/26866637
#SPJ1
Chloroform, formerly used as an anesthetic and now believed to be a carcinogen (cancer causing agent), has a heat of vaporization, ∆Hvaporization = 31.4 kJ/mole. The change, CHCl3(l) → CHCL3(g) has ∆So = 94.2 J/mole K. At what temperature do we expect CHCl3 to boil (i.e. at what temperature will liquid and vapor be in equilibrium at 1 atm pressure)?
Chloroform is expected to boil at 333.33 K (approx.)
To find the boiling point of chloroform (CHCl₂), which is now considered a carcinogen, we'll use the Clausius-Clapeyron equation. Given the heat of vaporization (∆Hvaporization) as 31.4 kJ/mole and the entropy change (∆So) as 94.2 J/mole K, we can find the boiling point temperature.
Step 1: Convert the given values to the same units, preferably J/mole.
∆Hvaporization = 31.4 kJ/mole * 1000 J/kJ = 31400 J/mole
Step 2: Apply the Clausius-Clapeyron equation:
∆G = ∆H - T∆S
Since we are looking for the boiling point temperature at 1 atm pressure, we can assume that ∆G = 0 (as the process is in equilibrium). Rearrange the equation to solve for T:
T = ∆H / ∆S
Step 3: Calculate the temperature:
T = (31400 J/mole) / (94.2 J/mole K) ≈ 333.33 K
So, we expect chloroform to boil at approximately 333.33 K.
To know more about the chloroform refer here :
https://brainly.com/question/13334667#
#SPJ11
What life process breaks down dead organic matter for energy using oxygen and releasing carbon dioxide? a. Respiration b. Combustion c. Decomposition d. Photosynthesis
Respiration breaks down dead organic matter for energy using oxygen and releasing carbon dioxide.
What is Respiration?
Respiration is the biological process by which living organisms exchange gases, usually oxygen and carbon dioxide, with the environment. In animals, respiration involves the absorption of oxygen from the air or water, the transportation of oxygen to the cells of the body, the use of oxygen by the cells to generate energy through cellular respiration, and the elimination of carbon dioxide, which is a waste product of this process.
In the case of dead organic matter, microorganisms such as bacteria and fungi carry out respiration as a means of obtaining energy. These microorganisms use the organic matter as a source of food, breaking it down into simpler compounds through a process called decomposition. During this process, oxygen is consumed and carbon dioxide is released as a byproduct.
Therefore, respiration breaks down dead organic matter for energy using oxygen and releasing carbon dioxide.
To know more about Respiration, go to the given link;
brainly.com/question/22673336
#SPJ1
28) In which set do all elements tend to form cations in binary ionic compounds?A) Li, Sn, OB) Ca, Zn, SnC) N, As, BiD) S, F, Br
Hi! I'm happy to help with your question. The set in which all elements tend to form cations in binary ionic compounds is A) Li, Sn, O.
Step 1: Understand that cations are positively charged ions formed when an element loses electrons.
Step 2: Determine which elements in the given sets typically lose electrons to form cations.
Step 3: Li (lithium) loses one electron to form Li+, Sn (tin) loses two or four electrons to form Sn2+ or Sn4+, and O (oxygen) gains two electrons to form O2-. However, in the context of binary ionic compounds, Li and Sn will bond with other elements and form cations, while O will form an anion.
So, the correct answer is A) Li, Sn, O.
To know more about binary ionic compounds refer here:
https://brainly.com/question/3028735
#SPJ11
which of the following compounds exhibit hydrogen bonding? select all that apply. group of answer choices hcl ch4 h2te ch3oh hi hf h3coch3 ch2f2 nh3 ash3 h2o
Out of the given compounds, the ones that exhibit hydrogen bonding are H2O, NH3, CH3OH, and HF. Hydrogen bonding is a type of intermolecular force that occurs between a hydrogen atom bonded to a highly electronegative element (such as N, O, or F) and another highly electronegative element on a different molecule.
In H2O, the hydrogen atoms are bonded to an oxygen atom, which is highly electronegative, and thus, hydrogen bonding occurs between the molecules. Similarly, NH3 and CH3OH have highly electronegative nitrogen and oxygen atoms, respectively, that form hydrogen bonds with neighboring molecules.
Finally, HF has a highly electronegative fluorine atom bonded to a hydrogen atom, which forms strong hydrogen bonds with neighboring molecules.
On the other hand, HCl, CH4, H2Te, HI, CH2F2, AsH3, and (CH3)2O do not exhibit hydrogen bonding as they lack highly electronegative elements that can form hydrogen bonds.
Overall, the presence of hydrogen bonding in a compound affects its physical and chemical properties, such as boiling point, solubility, and reactivity.
To know more about intermolecular force refer here:
https://brainly.com/question/9007621#
#SPJ11
classification of an acid or a base is useful when predicting how a chemical will react with another chemical. responses true true false
The statement "Classification of an acid or a base is useful when predicting how a chemical will react with another chemical" is true.\
Knowing whether a chemical is an acid or a base can help predict how it will react with other chemicals. Acids tend to donate protons (H+) while bases tend to accept protons, and these tendencies influence their reactions.
For example, acids react with bases to form salts and water, while bases react with acids to form salts and water as well. Additionally, acids can react with metals to form metal salts and hydrogen gas, while bases can react with certain organic compounds to form salts and water.
By understanding the properties and behavior of acids and bases, chemists can predict and control chemical reactions, which is important for many fields such as drug development, materials science, and environmental science.
For such more questions on Acid or a Base:
https://brainly.com/question/9836972
#SPJ11
Determine the mass of each of the following:(a) 0.0146 mol KOH(b) 10.2 mol ethane, C2H6(c) 1.6 × 10−3 mol Na2 SO4(d) 6.854 × 103 mol glucose, C6 H12 O6(e) 2.86 mol Co(NH3)6Cl3
The mass of
(a) 0.0146 mol KOH is 0.818 g
(b) 10.2 mol ethane, C2H6 is 307 g
(c) 1.6 × 10−3 mol Na2 SO4 is 0.227 g
(d) 6.854 × 103 mol glucose, C6 H12 O6 is 1.236 × 106 g
(e) 2.86 mol Co(NH3)6Cl3 is 884 g
To determine the mass of each substance, we need to use the molar mass of each compound and multiply it by the number of moles given.
(a) 0.0146 mol KOH:
The molar mass of KOH is 56.11 g/mol (39.10 g/mol for K + 16.00 g/mol for O + 1.01 g/mol for H). Therefore, the mass of 0.0146 mol KOH is:
0.0146 mol KOH x 56.11 g/mol = 0.818 g
(b) 10.2 mol ethane, C2H6:
The molar mass of C2H6 is 30.07 g/mol (2 x 12.01 g/mol for C + 6 x 1.01 g/mol for H). Therefore, the mass of 10.2 mol C2H6 is:
10.2 mol C2H6 x 30.07 g/mol = 307 g
(c) 1.6 × 10−3 mol Na2 SO4:
The molar mass of Na2SO4 is 142.04 g/mol (2 x 22.99 g/mol for Na + 32.06 g/mol for S + 4 x 16.00 g/mol for O). Therefore, the mass of 1.6 × 10−3 mol Na2SO4 is:
1.6 × 10−3 mol Na2SO4 x 142.04 g/mol = 0.227 g
(d) 6.854 × 103 mol glucose, C6H12O6:
The molar mass of C6H12O6 is 180.16 g/mol (6 x 12.01 g/mol for C + 12 x 1.01 g/mol for H + 6 x 16.00 g/mol for O). Therefore, the mass of 6.854 × 103 mol C6H12O6 is:
6.854 × 103 mol C6H12O6 x 180.16 g/mol = 1.236 × 106 g
(e) 2.86 mol Co(NH3)6Cl3:
The molar mass of Co(NH3)6Cl3 is 309.29 g/mol (58.93 g/mol for Co + 6 x 17.03 g/mol for NH3 + 3 x 35.45 g/mol for Cl). Therefore, the mass of 2.86 mol Co(NH3)6Cl3 is:
2.86 mol Co(NH3)6Cl3 x 309.29 g/mol = 884 g
For more such questions on Mass.
https://brainly.com/question/28112914#
#SPJ11
96) Which one of the following is NOT an empirical formula?A) CHOB) CH2O C) C2H4OD) C2H6O2E) C3H8O
The one which is not the empirical formula is C₂H₆O₂. The correct option is D.
A) CHO = 1 : 1 : 1 = simplest form , this is an empirical formula.
B) CH₂O = 1 : 2 : 1 = simplest form , this is an empirical formula.
C) C₂H₄O = 2 : 4 : 1 = simplest form , this is an empirical formula.
D) C₂H₆O₂ = 2 : 6 : 2 = not the simplest form, this is not the empirical formula.
E ) C₃H₈O = 3 : 8 : 1 = simplest form , this is an empirical formula.
The empirical formula for the chemical compound is the formula that is the simplest whole number ratio of the atoms which is present in the compound.
To learn more about empirical formula here
https://brainly.com/question/1413103
#SPJ4
If the half life of a radioisotope is 3 years, how much of a 90g sample is left after 9 years?
The half life of a radioisotope is the amount of time it takes for half of the original sample to decay. If the half life of the radioisotope is 3 years, then after 3 years, half of the sample will remain (45g) and the other half will have decayed.
After another 3 years (6 years total), half of the remaining sample will decay leaving only 22.5g remaining. After a total of 9 years (3 half lives), only one eighth (1/2 x 1/2 x 1/2) of the original sample will remain, which is 90g/8 = 11.25g. Therefore, after 9 years, only 11.25g of the original 90g sample will remain.
Learn more about radioisotope:
https://brainly.com/question/18640165
#SPJ11
75) What mass of ethane, C2H6, contains the same number of molecules as 3.00 g of trichlorofluoromethane, CCl3F? A) 0.0727 gB) 0.655 gC) 1.52 gD) 13.7 g
The mass of ethane, C2H6, that contains the same number of molecules as 3.00 g of trichlorofluoromethane, CCl3F, is 0.655 g. To solve this problem, we can use the concept of moles and the molecular weights of each compound.
1. Calculate the moles of trichlorofluoromethane (CCl3F) in 3.00 g:
Molecular weight of CCl3F = 12.01 (C) + 3*35.45 (Cl) + 19.00 (F) = 137.36 g/mol
Moles of CCl3F = mass / molecular weight = 3.00 g / 137.36 g/mol = 0.0218 moles
2. Since we need the same number of molecules, the moles of ethane (C2H6) will be the same as the moles of CCl3F, i.e., 0.0218 moles.
3. Calculate the mass of ethane (C2H6) that contains 0.0218 moles:
Molecular weight of C2H6 = 2*12.01 (C) + 6*1.008 (H) = 30.07 g/mol
Mass of C2H6 = moles * molecular weight = 0.0218 moles * 30.07 g/mol = 0.655 g
So, the mass of ethane, C2H6, that contains the same number of molecules as 3.00 g of trichlorofluoromethane, CCl3F, is 0.655 g (Option B).
For more such questions on Ethane, visit:
brainly.com/question/19128101
#SPJ11
What bomb class usually causes smoke and a small flash upon impact?
Smoke and flare bomb class usually causes smoke and flash upon impact.
What bomb class usually causes smoke and a small flash upon impact?When it comes to bombs, there are a variety of factors that can cause smoke and a small flash upon impact. The specific design and purpose of the bomb play a key role in determining these effects. One type of bomb that is particularly known for producing smoke and flash is the smoke or flare bomb.
What is smoke bomb?Smoke bombs serve the purpose of emitting a dense cloud of smoke when triggered, which can be utilized for signaling, marking targets or obstructing visibility. Additionally, these devices could include a minor flash or light burst as part of their mechanism.
What is flare bomb?When it comes to flare bombs, their purpose is to emit a brilliant burst of light when activated. This feature can be utilized for illuminating a specific target or area. Additionally, some flare bombs are designed to produce smoke as a secondary effect.
To know more about bombs, click here
https://brainly.com/question/28739270
#SPJ1
The ratio of the actual value of a colligative property to the value calculated, assuming the substance to be a nonelectrolyte, is referred to as __________.
a. vapor pressure lowering
b. Henry's law
c. osmotic pressure
d. the van't Hoff factor
e. freezing point depression
The ratio of the actual value of a colligative property to the value calculated, assuming the substance to be a nonelectrolyte, is referred to as d. the van't Hoff factor
In comparison to the value anticipated for a nonelectrolyte, the Van't Hoff factor measures how much a solute dissociates or ionises in a solution. It is used to account for the impact of solute ionisation or dissociation on the computation of the collinear characteristics of solutions and is represented by the symbol "I".
Colligative qualities are those of a solution that, independent of the chemical composition of the solute particles, rely exclusively on their concentration. Collaborative qualities include things like reduced vapour pressure, increased boiling point, decreased freezing point, and reduced osmotic pressure. If the solute is a nonelectrolyte that doesn't dissolve or ionise, these qualities are utilised to compute the molar mass or molecular weight of the solute in a solution.
Read more about Van't Hoff factor on:
https://brainly.com/question/22047232
#SPJ4
radioactivity of an element can be removed only by applying highly sophisticated chemical treatments. true or false
The given statement " radioactivity of an element can be removed only by applying highly sophisticated chemical treatments." is false because the radioactivity of an element cannot be removed by any chemical or physical treatment as it is an intrinsic property of the atom's nucleus.
Radioactivity refers to the spontaneous decay of unstable nuclei, resulting in the emission of ionizing radiation in the form of alpha particles, beta particles, or gamma rays. While it is possible to shield oneself from this radiation, it cannot be removed by chemical or physical means. However, some radioactive isotopes can decay naturally over time, and their radioactivity can diminish or disappear completely as a result.
You can learn more about radioactivity at
https://brainly.com/question/26626062
#SPJ11
The approach to balance redox reactions occurring in basic solution is to first balance them as if they were in acidic solution, then count the number of ______ and add this same number of ______ to each side of the half-reaction.
To balance redox reactions occurring in a basic solution, first, balance them as if they were in an acidic solution. Then, count the number of protons (H+) and add this same number of hydroxide ions (OH-) to each side of the half-reaction.
This approach combines the half-reactions to form a balanced redox equation, with the addition of OH- ions neutralizing the H+ ions. This results in water (H2O) molecules, which then need to be balanced on both sides of the equation.
In summary, start by balancing the redox reaction in an acidic solution, count the H+ ions, and add an equal number of OH- ions to both sides to balance the equation for a basic solution.
To know more about protons (H+) refer here:
https://brainly.com/question/6005163#
#SPJ11
how many moles of naoh would be required to react completely with the acetic acid in the 8.3ml vinegar sample
The number of moles of NaOH required to react completely with the acetic acid in the vinegar sample is also 0.00698 mol.
What is Moles?
Moles are a unit of measurement used in chemistry to express the amount of a substance. One mole of a substance is defined as the amount of that substance that contains the same number of entities (such as atoms, molecules, or ions) as there are in 12 grams of pure carbon-12.
Calculate the mass of acetic acid in the vinegar sample using its density and the percentage of acetic acid by mass. For example, if the density of the vinegar is 1.01 g/mL, then the mass of the vinegar sample is:
mass = density x volume = 1.01 g/mL x 8.3 mL = 8.383 g
The mass of acetic acid in the vinegar is:
mass of acetic acid = 5% x 8.383 g = 0.419 g
Convert the mass of acetic acid to moles using its molar mass, which is 60.05 g/mol:
moles of acetic acid = mass / molar mass = 0.419 g / 60.05 g/mol = 0.00698 mol
Use the molar ratio between NaOH and acetic acid, which is 1:1 according to the balanced chemical equation:
NaOH + [tex]CH_{3}[/tex]COOH → [tex]CH_{3}[/tex]COONa +[tex]H_{2}O[/tex]
This means that one mole of NaOH is required to react completely with one mole of acetic acid.
Learn more about Moles
https://brainly.com/question/29367909
#SPJ1
state the class of matter: Compressed air in a scuba tank
Compressed air in a scuba tank belongs to the class of matter known as gases.
Gases are one of the three fundamental states of matter, alongside solids and liquids. In a gaseous state, molecules are in constant motion, and they have enough kinetic energy to overcome the attractive forces between them, allowing them to move freely and fill the container they are in.
In the case of compressed air, the gas is primarily composed of nitrogen (78%), oxygen (21%), and trace amounts of other gases such as carbon dioxide and argon. Scuba tanks store this air under high pressure, typically around 200-300 bar, which is 200-300 times the atmospheric pressure at sea level.
This high-pressure storage allows a large volume of air to be compressed into a smaller space, enabling scuba divers to carry a sufficient air supply for their underwater excursions.
For more such questions on Compressed air, click on:
https://brainly.com/question/30382168
#SPJ11
What effects can lowering the solution's vapor pressure have on temperates?
Lowering a solution's vapor pressure can result in an increased boiling point, a higher freezing point, and a reduced evaporation rate, all of which can have an impact on the solution's temperature.
What factors affect the Vapor Pressure of a solution?The effects of lowering a solution's vapor pressure on temperatures are:
1. Lower boiling point: When the vapor pressure of a solution is lowered, it takes more energy (higher temperature) for the molecules to escape the liquid phase and become a gas. As a result, the boiling point of the solution increases.
2. Higher freezing point: Lowering the vapor pressure also affects the freezing point of a solution. With lower vapor pressure, the solution will have a higher freezing point, meaning it will solidify at a higher temperature than it would with higher vapor pressure.
3. Reduced evaporation rate: When the vapor pressure is lowered, it slows down the evaporation process. This means that the solution will take longer to evaporate at a given temperature, leading to a decrease in the cooling effect that evaporation usually provides.
To know more about Vapor Pressure:
https://brainly.com/question/11864750
#SPJ11
True or false: The emf of a concentration cell is derived from a concentration gradient wherein the less concentrated cell acts as the anode and the more concentrated cell acts as the cathode.
True. In a concentration cell, the emf is generated by a concentration gradient between the two half-cells. The half-cell with lower concentration will act as the anode and the one with higher concentration will act as the cathode.
The emf of a concentration cell is derived from a concentration gradient wherein the less concentrated cell acts as the anode and the more concentrated cell acts as the cathode. The emf of a concentration cell is indeed derived from a concentration gradient. In this setup, the less concentrated cell acts as the anode, and the more concentrated cell acts as the cathode. This creates an electrochemical potential difference, which generates the electromotive force (emf) in the concentration cell.
To know more about EMF:
https://brainly.com/question/9908745
#SPJ11
If the vapor pressure of a solution is lower than that of the pure solvent, then what must happen in order for its vapor pressure to equal that ambient pressure?
To equalize the vapor pressure of a solution with a lower vapor pressure than its pure solvent to the ambient pressure, you must heat the solution until its boiling point is reached. This process will cause an increase in vapor pressure due to the increase in kinetic energy of the solvent molecules, eventually equalizing it with the ambient pressure.
It is clear that the vapor pressure of the solution is lower than that of the pure solvent. In order for the vapor pressure of the solution to equal the ambient pressure, the following steps need to occur:
1. First, the solution must be heated. As the temperature of the solution increases, so does its vapor pressure.
2. The increase in vapor pressure is caused by an increase in the kinetic energy of the solvent molecules within the solution. This allows more molecules to escape from the liquid phase into the vapor phase.
3. Continue heating the solution until its vapor pressure matches the ambient pressure. At this point, the solution has reached its boiling point.
4. Once the boiling point is reached, the solution will begin to change from a liquid state to a gaseous state, as more and more solvent molecules escape into the vapor phase.
5. As long as the temperature and ambient pressure are maintained, the vapor pressure of the solution will continue to equal the ambient pressure.
To know more about vapor pressure refer to
https://brainly.com/question/2693029
Why can weaker reducing agents only reduce aldehydes and ketones?
Weaker reducing agents can only reduce aldehydes and ketones because these carbonyl compounds have a more electrophilic carbonyl carbon compared to other functional groups, such as carboxylic acids and esters.
How to reduce Aldehydes and Ketones?Weaker reducing agents, such as NaBH4 (sodium borohydride) and LiAlH4 (lithium aluminum hydride), can only reduce aldehydes and ketones because these functional groups are not as strongly electron-withdrawing as carboxylic acids or esters. The electrophilic carbonyl carbon makes aldehydes and ketones more susceptible to nucleophilic attack by weaker reducing agents. In contrast, stronger reducing agents are required to reduce less electrophilic functional groups like carboxylic acids and esters.
To know more about Reduction:
https://brainly.com/question/30722723
#SPJ11
PLEASE ANSWER!!!! 50 POINTS!!!!!! QUICKLY
The reaction below generated 11.6 g Fe2S3 instead of the expected 16.8g. What is the percent yield?
2FeBr3 + 3N12S--> Fe2S3 + 6NaBr
A.) 69.0%
B.) 1.44%
C.) 5.2%
D.) 0.69%
Answer: A 69.0%
Explanation:
divide the actual yield by the theoretical yield to get the %yield
11.6/16.8= 0.6904 or 69.0%
Diamond has a density of 3.500 g/cm^3. What is the volume of a 8.5 g piece of diamond?
The volume of an 8.5g piece of diamond with a volume of 3.500 g/[tex]cm^3[/tex] is 2.42 cubic cm.
Density refers to the measurement o how tightly the material is packed. It is not affected by the mass and the volume of the object. It is affected by factors such as temperature. It is calculated as follows:
ρ = [tex]\frac{m}{V}[/tex]
where ρ is the density
m is the mass
v is the volume
Given in the question,
ρ = 3.500 g/[tex]cm^3[/tex]
m = 8.5 g
3.500 = [tex]\frac{8.5}{V}[/tex]
V = 8.5 / 3.5
V = 2.42 cubic cm
Thus, the answer to the given question is 2.42 cubic cm
Learn more about Density:
https://brainly.com/question/26364788
#SPJ4
radioactive element x has a half-life of approximately 50 days. radioactive element y has a half-life of approximately 100 days. a 0.8 g sample of element x and a 0.8 g sample of element y are weighed and examined. some time later, both samples are measured again and 0.2 g of element x remains. how much of element y remains?
The amount of element Y remaining is between 0.25 g and 0.4 g.
What is the half-life of a radioactive element?The half-life of a radioactive element is the time taken for half of the initial sample to decay. Using this information, we can determine the amount of element X remaining after a certain time has elapsed.
If the half-life of element X is 50 days, then after 50 days, half of the initial sample will remain. After another 50 days (i.e., a total of 100 days), half of that remaining amount will remain, which is 0.25 g. After another 50 days (i.e., a total of 150 days), half of that remaining amount will remain, which is 0.125 g. Therefore, after some time has passed and 0.2 g of element X remains, the time elapsed must be between 100 and 150 days.
Now, let's determine how much of element Y remains after the same amount of time has elapsed. If the half-life of element Y is 100 days, then after 100 days, half of the initial sample will remain. After another 100 days (i.e., a total of 200 days), half of that remaining amount will remain, which is 0.25 g. Therefore, after the same time has elapsed as for element X, which is between 100 and 150 days, the amount of element Y remaining should be between 0.25 g and 0.4 g.
To narrow down the range further, we can use the fact that the initial mass of both samples was 0.8 g. If 0.2 g of element X remains, then 0.6 g must have decayed. Therefore, the total mass of the two samples after some time has elapsed is 0.8 g - 0.6 g = 0.2 g.
If we assume that element Y has also decayed by the same amount, then the mass of element Y remaining is 0.2 g - 0.2 g = 0 g. This would mean that all of element Y has decayed, which is possible given that its half-life is longer than that of element X. However, if we assume that element Y has decayed less than element X, then the mass of element Y remaining must be between 0.25 g and 0.4 g.
Therefore, we can conclude that the amount of element Y remaining is between 0.25 g and 0.4 g.
Learn more about radioactive here:
https://brainly.com/question/1770619
#SPJ1
calculate the molar concentration of h3o ions and the ph of the following solutions: (a) 25.0 cm3 of 0.144 m hcl(aq) was added to 25.0 cm3 of 0.125 m naoh(aq), (b) 25.0 cm3 of 0.15 m hcl(aq) was added to 35.0 cm3 of 0.15 m koh(aq), and (c) 21.2 cm3 of 0.22 m hno3(aq) was added to 10.0 cm3 of 0.30 m naoh(aq).
The pH of a solution is defined as the negative logarithm to the base 10 of the value of the hydronium ion concentration in moles per litre. If the pH is less than 7, then it is acidic and if it is greater than 7, then it will be basic.
1 cm³ = 0.001 L
a) Moles of HCl = 0.144 M × 0.025 L = 3.6 × 10⁻³
Moles of NaOH = 0.125 × 0.025 = 3.125 × 10⁻³
The balanced chemical equation is:
HCl + NaOH → NaCl + H₂O
Moles of HCl remain unreacted is:
3.6 × 10⁻³ - 3.125 × 10⁻³ = 4.75 × 10⁻⁴
Molar concentration of HCl = 4.75 × 10⁻⁴ / 0.05 = 9.5 × 10⁻³ M
pH = - log [9.5 × 10⁻³] = 2.02
b) Moles of HCl = 0.00375
Moles of NaOH = 0.00525
Moles of NaOH remain unreacted is:
0.00525 - 0.00375 = 0.0015
Molar concentration of NaOH = 0.0015 / 0.025 = 0.06 M
pOH = - log [OH⁻] = -log [ 0.06] = 1.22
pH = 14 - 1.22 = 12.78
[H₃O⁺] = 10⁻pH = 1.65 × 10⁻¹³
c) Moles of HCl = 0.22 × 0.0212 = 0.0046
Moles of NaOH = 0.30 × 0.01 = 0.003
Moles of HCl remain unreacted is:
0.0046 - 0.003 = 0.0016
Molar concentration of HCl = 0.0016 / 0.0312 = 0.0512
pH = - log [0.0512] =1.290
To know more about pH, visit;
https://brainly.com/question/31447199
#SPJ4
Each strand contains around how many AA residues?
The number of amino acid residues in a strand: Each protein strand typically contains anywhere from 50 to 2,000 amino acid residues. The exact number varies greatly depending on the specific protein and its function.
Depending on the function of the protein and the precise placement of the strand within the protein's structure, the number of amino acid residues in a protein strand might change. For instance, whereas some proteins may have strands with 20 or more amino acids, others may only have strands with a few amino acids.
A protein strand typically has between 5 and 30 amino acid residues. However, certain proteins also contain longer strands. For instance, the protein beta-sheet's beta-strands can be fairly lengthy and some of them can contain up to 100 amino acid residues.
To know more about the amino acid refer here :
https://brainly.com/question/31442968#
#SPJ11
When solutions of strong electrolytes in water are formed, the ions are surrounded by water molecules. These interactions are described as a case of __________.
a. dehydration
b. supersaturation
c. crystallization
d. saturation
e. hydration
When strong electrolytes are dissolved in water, the ions become surrounded by water molecules in a process called hydration. The correct answer is e. hydration.
This helps to stabilize the ions in solution and prevent them from recombining into a solid state. Dehydration, on the other hand, refers to the removal of water molecules from a substance. Supersaturation is a state in which a solution contains more solute than it can normally hold at a given temperature and pressure, while crystallization is the process by which a solid forms from a solution, melt, or vapor. Saturation refers to a state in which a solution contains the maximum amount of solute that can dissolve at a given temperature and pressure.
Visit here to learn more about hydration:
brainly.com/question/15724859
#SPJ11
suppose that 2.5 moles of an ideal gas are in a chamber in equilibrium at temperature 310 k and volume 0.5 m3.how much work was done on the gas during this process?
According to ideal gas equation, work done is equal to pressure of gas during this process which is 12886.7 atmospheres.
The ideal gas equation is a equation which is applicable in a hypothetical state of an ideal gas.It is a combination of Boyle's law, Charle's law,Avogadro's law and Gay-Lussac's law . It is given as, PV=nRT where R= gas constant whose value is 8.314.The law has several limitations. Substitution of values in the equation gives P= 2.5×8.314×310/0.5=12886.7 atmospheres.
The pressure of gas is equal to work done which is 12886.7 atmospheres.
Learn more about ideal gas equation,here:
https://brainly.com/question/28837405
#SPJ4
When moving from left to right across a period, the outer electrons feel a ____ attraction towards the nucleus and the atomic radius ____.
When moving from left to right across a period, the outer electrons feel a stronger attraction towards the nucleus, and the atomic radius decreases.
This is because, as we move from left to right, the number of protons in the nucleus increases, which results in a stronger positive charge. The increasing positive charge pulls the electrons closer to the nucleus, making the atomic radius smaller.
Additionally, the number of electrons remains the same across a period, so there are no extra shielding electrons to counteract the attraction towards the nucleus. This means that the electrons have a higher effective nuclear charge, which further increases the attraction towards the nucleus.
As a result, the electrons are held more tightly, and it becomes harder to remove them, which means that the element is less likely to form positive ions.
Therefore, when moving from left to right across a period, the outer electrons feel a stronger attraction towards the nucleus, and the atomic radius decreases.
To know more about electrons, refer here:
https://brainly.com/question/1255220#
#SPJ11
