Answer:
C = 44.75 x 10⁻⁸ F
Explanation:
Assuming no loss of energy between capacitor and inductor
energy in inductor initially = 1/2 Li₀² where L is inductance and i₀ is peak current .
= .5 x 6 x 10⁻³ x .57²
= .97 x 10⁻³ J .
This energy is transferred to capacitor .
energy of capacitor = 1/2 CV²
= .5 x C x 66²
= 2178 C
2178C = .97 x 10⁻³
C = 44.75 x 10⁻⁸ F .
The magnetic energy stored in the inductor is transformed into electrical energy stored in the capacitor. The value of capacitance for the given circuit is 44.75 x 10⁻⁸ F
Finding the capacitance:According to the law of conservation of energy, the magnetic energy stored in the inductor will be gradually lost and this energy will be stored in the capacitor as electrical energy.
Initially, the energy in the inductor is:
E = 1/2 Li₀²
where L is inductance
and i₀ is peak current.
E = 0.5 × 6 × 10⁻³ × (0.57)²
E = 0.97 × 10⁻³J
This energy is transformed into electrical energy stored in the capacitor.
So the capacitor energy is:
E = 1/2 CV²
where C is the capacitance
E = 0.5 × C × 66²
E = 2178 C
0.97 x 10⁻³ = 2178 C
C = 44.75 x 10⁻⁸ F
Learn more about capacitance:
https://brainly.com/question/12356566?referrer=searchResults
Why do bears activity increase as certain points during the day
Because they are well rested and have to work to get food in their system.
You're driving a vehicle of mass 850 kg and you need to make a turn on a flat road. The radius of curvature of the turn is 80 m. The maximum horizontal component of the force that the road can exert on the tires is only 0.22 times the vertical component of the force of the road on the tires (in this case the vertical component of the force of the road on the tires is , the weight of the car, where as usual 9.8 N/kg, the magnitude of the gravitational field near the surface of the Earth). The factor 0.22 is called the "coefficient of friction" (usually written "", Greek "mu") and is large for surfaces with high friction, small for surfaces with low friction.(a) What is the fastest speed you can drive and still make it around the turn? Invent symbols for the various quantities and solve algebraically before plugging in numbers.
maximum speed = ____ m/s
(b) Which of the following statements are true about this situation?
The net force is nonzero and points away from the center of the kissing circle.The momentum points toward the center of the kissing circle.The net force is nonzero and points toward the center of the kissing circle.The rate of change of the momentum is nonzero and points toward the center of the kissing circle.The centrifugal force balances the force of the road, so the net force is zero.The rate of change of the momentum is nonzero and points away from the center of the kissing circle.
(c) Look at your algebraic analysis and answer the following question. Suppose your vehicle had a mass 3 times as big (5250 kg). Now what is the fastest speed you can drive and still make it around the turn?
maximum speed = ____ m/s
(d) Look at your algebraic analysis and answer the following question. Suppose you have the original 1750 kg vehicle but the turn has a radius twice as large (166 m). What is the fastest speed you can drive and still make it around the turn?
maximum speed = ____m/s
Answer:
(a) v = 13.13 m/s
(b) The centrifugal force balances the force of the road, so net force is zero.
(c) v = 13.13 m/s
(d) v = 18.92 m/s
Explanation:
(a)
To make it around the turn without skidding the frictional force on cat must balance the centrifugal force. Therefore:
Frictional Force = Centrifugal Force
μR = mv²/r
where,
R = Normal Reaction = Weight of Car = mg
Therefore,
μmg = mv²/r
μg = v²/r
v = √μgr
where,
v = maximum possible velocity of car = ?
μ = coefficient of friction = 0.22
g = 9.8 m/s²
r = radius of curvature = 80 m
Therefore,
v = √[(0.22)(9.8 m/s²)(80 m)
v = 13.13 m/s
(b)
In order for the car to move without skidding around the turn, all the forces in horizontal direction must be equal. Hence, the centrifugal force and the frictional force (force of the road) must balance each other. So the true statement is:
The centrifugal force balances the force of the road, so net force is zero.
(c)
v = √μgr
Since the formula for speed is independent of mass. Therefore, the speed will remain same.
v = 13.13 m/s
(d)
v = √μgr
v = √[(0.22)(9.8 m/s²)(166 m)
v = 18.92 m/s
A glass sphere carrying a uniformly distributed charge of +Q is surrounded by an initially neutralspherical plastic shell. (Assume the charge +Q is uniformly distributed across thesurface of the glass sphere.)
Required:
a. Qualitatively, indicate the polarization of the plastic.
1. The plastic will polarize so as to have positive charge +Qon its inner surface and negativecharge −Q on its outer surface.
2. Dipoles in the plastic will polarize and orient themselves perpendicular to the radial electricfield due to the charge +Q.
3. Dipoles in the plastic will polarize and orient themselves radially, with their negativeends pointing toward the center.
4. Dipoles in the plastic will polarize and orient themselves radially, with their positiveendspointing toward the center.
b. Qualitatively, indicate the polarization of the inner glass sphere. Explain briefly.A net charge −Q from the dipoles will be uniformly distributed through the volume of the sphere.
1. There will be no polarization inside the glass sphere since the net electric field there iszero.
2. Dipoles in the glass will polarize and orient themselves perpendicular to the radial electricfield due to the charge +Q.
3. Dipoles in the glass will polarize and orient themselves radially, with their positive endspointing toward the center.
c. Is the electric field at location Poutside the plastic shell larger, smaller, or the same as itwould be if the plastic weren't there? Explain briefly.
1. Larger, because a net positive charge is created from the polarization of the shell.
2. Larger, because the positive charges displaced during polarization are closer to P than thenegative charges.
3. Smaller, because the negative charges displaced during polarization are closer to Pthanthe positive charges.
4. Smaller, because the plastic shell shields location Pfrom the charge +Q, such that the netfield at Pis zero.
5. The same, because no net charge is created from the polarization of the field.
Answer:
(A) 3. Dipoles in the plastic will polarize and orient themselves radially, with their negativeends pointing toward the center
(B) 2. There will be no polarization inside the glass sphere since the net electric field there is zero.
Explanation: charges are only distributed on the surface of the charged hollow conductor. The core must have zero charge.
(C) 2. Larger, because the positive charges displaced during polarization are closer to P than thenegative charges.
When you take your 1900-kg car out for a spin, you go around a corner of radius 56 m with a speed of 14 m/s. The coefficient of static friction between the car and the road is 0.88. Part A Assuming your car doesn't skid, what is the force exerted on it by static friction
Answer:
6,650 newtons
Explanation:
The computation of the force exerted on it by static friction is shown below:
Data provided in the question
Mass of car = m = 1,900 kg
speed = v = 14 m/s
radius = r = 56 m
Let us assume friction force be f
And, the Coefficient of friction = [tex]\mu[/tex]= 0.88
As we know that
[tex]f = \frac{mv^2}{r}[/tex]
[tex]= \frac{1,900 \times 14^2}{56}[/tex]
= 6,650 newtons
We simply applied the above formula so that the force exerted could come
Your electric drill rotates initially at 5.35 rad/s. You slide the speed control and cause the drill to undergo constant angular acceleration of 0.331 rad/s2 for 4.81 s. What is the drill's angular displacement during that time interval?
Answer:
The angular displacement is [tex]\theta = 29.6 \ rad[/tex]
Explanation:
From the question we are told that
The initial angular speed is [tex]w = 5.35 \ rad/s[/tex]
The angular acceleration is [tex]\alpha = 0.331 rad /s^2[/tex]
The time take is [tex]t = 4.81 \ s[/tex]
Generally the angular displacement is mathematically represented as
[tex]\theta = w * t + \frac{1}{2} \alpha * t^2[/tex]
substituting values
[tex]\theta = 5.35 * 4.81 + \frac{1}{2} * 0.331 * (4.81)^2[/tex]
[tex]\theta = 29.6 \ rad[/tex]
What percent of our solar system's mass is in the sun?
Answer:
99.8
Explanation:
most massive the sun is at the center of the universe
The site from which an airplane takes off is the origin. The X axis points east, the y axis points straight up. The position and velocity vectors of the plane at a later time are given by r=(1.21x103i+3.45x104;)m and v= (2 i-3.5j) m/s The magnitude, in meters, of the plane's displacement from the origin is:_________
a. 2.50 x104
b. 1.45 x 104
c. 3.45x104
d. 2.5x103
e. none of the above
Answer:
d = 3.5*10^4 m
Explanation:
In order to calculate the displacement of the airplane you need only the information about the initial position and final position of the airplane. THe initial position is at the origin (0,0,0) and the final position is given by the following vector:
[tex]\vec{r}=(1.21*10^3\hat{i}+3.45*10^4\hat{j})m[/tex]
The displacement of the airplane is obtained by using the general form of the Pythagoras theorem:
[tex]d=\sqrt{(x-x_o)^2+(y-y_o)^2}[/tex] (1)
where x any are the coordinates of the final position of the airplane and xo and yo the coordinates of the initial position. You replace the values of all variables in the equation (1):
[tex]d=\sqrt{(1.12*10^3-0)^2+(3.45*10^4-0)^2}=3.45*10^4m[/tex]
hence, the displacement of the airplane is 3.45*10^4 m
Two carts undergo an inelastic collision where they stick together. Cart A has an initial velocity v0, and the second cart B is initially at rest. After the collision, it is observed that the ratio of the final kinetic energy system to its initial kinetic energy is KfK0= 1/6. Determine the ratio of the carts' masses, mBmA. (Assume the track is frictionless.)
Answer:
Explanation:
Initial kinetic energy of the system = 1/2 mA v0²
If Vf be the final velocity of both the carts
applying conservation of momentum
final velocity
Vf = mAvo / ( mA +mB)
kinetic energy ( final ) = 1/2 (mA +mB)mA²vo² / ( mA +mB)²
= mA²vo² / 2( mA +mB)
Given 1/2 mA v0² / mA²vo² / 2( mA +mB) = 6
mA v0² x ( mA +mB) / mA²vo² = 6
( mA +mB) / mA = 6
mA + mB = 6 mA
5 mA = mB
mB / mA = 5 .
"A trooper is moving due south along the freeway at a speed of 28 m/s. At time t = 0, a red car passes the trooper. The red car moves with constant velocity of 40 m/s southward. At the instant the trooper's car is passed, the trooper begins to speed up at a constant rate of 2.9 m/s2. What is the maximum distance ahead of the trooper that is reached by the red car?"
Answer:
24.83 m
Explanation:
Applying the equation of motion;
d = vt + 0.5at^2 ......1
Where;
d = distance
v = velocity
t = time
a = acceleration
For the trooper;
v = 28 m/s
a = 2.9 m/s^2
Substituting into equation 1;
d1 = 28t + 0.5(2.9t^2)
d1 = 28t + 1.45t^2
For the red car;
v = 40 m/s
a = 0
Substituting into equation 1
d2 = 40t
The difference in distance is;
d = d2 - d1
d = 40t - (28t + 1.45t^2)
d = 12t - 1.45t^2
The maximum distance is at d(d)/dt = 0
differentiating d;
d' = 12 - 2.9t = 0
2.9t = 12
t = 12/2.9 = 4.137931034482
t = 4.138 s
Substituting t into function d;
d(max) = 12(4.138) - 1.45(4.138^2)
d(max) = 24.8275862 = 24.83 m
the maximum distance ahead of the trooper that is reached by the red car is 24.83 m
At an accident scene on a level road, investigators measure a car’s skid mark (mass of car is M) to be of length d. It was a rainy day and the coefficient of friction was estimated to be μk.
A) Use these data to determine the speed of the car when the driver slammed on (and locked) the brakes.B) Why does the car's mass not matter?1) Since both the change in kinetic energy and the work done by friction are proportional to the mass. The mass cancels out of the equation.2) Since the work done by friction does not depend on mass.3) Since the change in kinetic energy and the work done by friction do not depend on mass.
Answer:
1) Since both the change in kinetic energy and the work done by friction are proportional to the mass. The mass cancels out of the equation
Explanation:
The kinetic friction works against the kinetic energy of the car and the car stops when these two equalises .
friction force = μk x R , μk is coefficient of kinetic friction and R is reaction from the ground.
= μk x mg
work done by friction
= force x displacement
= μk x mg x d
kinetic energy of car at the time of accident = 1/2 m v²
kinetic energy = work done by friction
1/2 m v² = μk x mg x d
d = v² / (2 μk x g)
v² = 2dμk g
v = √(2dμk g)
Since both the change in kinetic energy and the work done by friction are proportional to the mass. The mass cancels out of the equation
A hornet circles around a pop can at increasing speed while flying in a path with a 12-cm diameter. We can conclude that the hornet's wings must push on the air with force components that are Group of answer choices down and backwards. down, backwards, and outwards. down and inwards. down and outwards. straight down.
Answer:
down, backwards, and outwards.
Explanation:
For a hornet that is accelerating in flight, this means that there is a net forward motion at a relatively constant vertical height above the ground.
For this flight, the wings beat downwards to counter the weight of the hornet due to gravity, keeping it at that height above the floor.
For the hornet to accelerate forward, there has to be a net backwards force by the wing on the air. This backwards force accelerates tr forward due to the absence of an equal opposing force in the opposite direction save for a little drag.
The wings also beat with forces directed outwards to provide centripetal force to keep the hornet stable. The absence of this would cause it to spiral out of control.
1. Calculate the centripetal force exerted on a 900kg900kg car that rounds a 600m600m radius curve on horizontal ground at 25.0m/s25.0m/s. 2. Static friction prevents the car from slipping. Find the magnitude of the frictional force between the tires and the road that allows the car to round the curve without sliding off in a straight line.
Explanation:
It is given that,
Mass of a car is 900 kg
Radius of curve is 600 m
Speed of the car in the curve is 25 m/s
We need to find the centripetal force exerted on a car. The formula used to find the centripetal force is given by :
[tex]F=\dfrac{mv^2}{r}\\\\F=\dfrac{900\times (25)^2}{600}\\\\F=937.5\ N[/tex]
So, the centripetal force exerted on a car is 937.5 N.
Static friction prevents the car from slipping. It means that the magnitude of centripetal force is balanced by the frictional force. So, the frictional force of 937.5 N is acting on the car.
A man pushes a 25kg box up an incline 2.0m by applying a steady force of 95N parallel to the incline. The box moves up the incline at a steady speed. The incline makes an angle 15 degrees to the horizontal
a) What is the force of friction between the incline and the box
b)If the box is released at the top of the incline, what will its speed be at the bottom
Answer:
a) Ff = 19.29 N
b) v = 3.00 m/s
Explanation:
a) To calculate the friction force you use the second Newton Law in the incline plane, with an acceleration equal to zero, because the motion of the box has a constant velocity:
[tex]F-F_f-Wsin(\theta)=0\\\\[/tex] (1)
F: force applied by the man = 95N
Ff: friction force
W: weight of the box = Mg = (25kg)(9.8m/s^2) = 245N
θ: degree of the inclined plane = 15°
You solve the equation (1) for Ff and you replace the values of all variables in the equation (1):
[tex]F_f=-Wsin(\theta)+F\\\\F_f=-(245N)sin18\°+95N=19.29N[/tex]
b) To fins the velocity of the box at the bottom you use the following formula:
[tex]W_N=\Delta K[/tex] (2)
That is, the net work over the box is equal to the change in the kinetic energy of the box.
The net work is:
[tex]W_N=Mgsin(18\°)d-Ffd[/tex]
d: distance traveled by the box = 2.0m
[tex]W_N=245sin18\°(2.0m)N-19.29(2.0m)N=112.83J[/tex]
You use this value of the net work to find the final velocity of the box, by using the equation (2):
[tex]112.8J=\frac{1}{2}m[v^2-v_o^2]\\\\v_o=0m/s\\\\v=\sqrt{\frac{2(112.8J)}{m}}=\sqrt{\frac{225.67J}{25kg}}=3.00\frac{m}{s}[/tex]
The speed of the box, at the bottom of the incline plane is 3.00 m/s
A 330-km-long high-voltage transmission line 2.00 cm in diameter carries a steady current of 1,110 A. If the conductor is copper with a free charge density of 8.50 1028 electrons per cubic meter, how many years does it take one electron to travel the full length of the cable? (Use 3.156 107 for the number of seconds in a year.)
Answer:
t = 402 years
Explanation:
To find the number of year that electrons take in crossing the complete transmission line, you first calculate the drift speed of the electrons. Then, you use the following formula for the current in a wire:
[tex]I=nqv_dA[/tex] (1)
n: number of mobile charge carrier per volume = 8.50*10^28 e/m^3
q: charge of the electron = 1.6*10^-19 C
vd: drift velocity of electron in the metal = ?
A: cross sectional area of the wire = π r^2 = π (0.02m/2)^2 = 3.1415*10^-4 m^2
I: current in the wire = 1110 A
You solve the equation (1) for vd:
[tex]v_d=\frac{I}{nqA}=\frac{110A}{(8.50*10^{28}m^{-3})(1.6*10^{-19}C)(3.1415*10^{-4}m^2)}\\\\v_d=2.59*10^{-4}m/s[/tex]
Next, you calculate the time by using the information about the length of the line transmission:
[tex]x=v_dt\\\\x=330km=330000m\\\\t=\frac{x}{v_d}=\frac{330000m}{2.59*10^{-4}m/s}=1,270,184,865s\\\\1,270,184,865s*\frac{1\ year}{3,156,107}=402.45\ years[/tex]
hence, the electrons will take aproximately 402 years in crossing the line of transmission
You are at a stop light in your car, stuck behind a red light. Just before the light is supposed to change, a fire engine comes zooming up towards you traveling at a horrendous 85.0 km/h. If the siren has a rated frequency 665 Hz, what frequency of the sound do you hear
Answer:
The frequency of the sound you will hear is 713.85 Hz
Explanation:
Given;
speed of your car, [tex]v_s[/tex] = 85.0 km/h
frequency of the siren, f = 665 Hz
Speed of sound in air, v = 345 m/s
The frequency of the sound you hear, can be calculated as;
[tex]f' = f(\frac{v}{v-v_s})[/tex]
Convert the speed of the car to m/s
[tex]85 \ km/h =\frac{85 \ km}{h} (\frac{1000\ m}{1 \ km})(\frac{1 \ h}{3600 \ s} ) = 23.61 \ m/s[/tex]
[tex]f' = f(\frac{v}{v-v_s} )\\\\f' = 665(\frac{345}{345-23.61} )\\\\f' = 665 (1.07346)\\\\f' = 713.85 \ Hz[/tex]
Therefore, the frequency of the sound you will hear is 713.85 Hz
g The potential energy of a pair of hydrogen atoms separated by a large distance x is given by U(x)=−C6/x6, where C6 is a positive constant. Part A What is the force that one atom exerts on the other? Express your answer in terms of C6 and x. Fx = nothing Request Answer Part B Is this force attractive or repulsive? Is this force attractive or repulsive? attractive repulsive
Answer:
[tex]F_x = -\frac{6 C_6}{2^7}[/tex]
Attractive
Explanation:
Data provided in the question
The potential energy of a pair of hydrogen atoms given by [tex]\frac{C_6}{X_6}[/tex]
Based on the given information, the force that one atom exerts on the other is
Potential energy μ = [tex]\frac{C_6}{X_6}[/tex]
Force exerted by one atom upon another
[tex]F_x = \frac{\partial U}{\partial X} = \frac{\partial}{\partial X} (-\frac{C_6}{X^6})[/tex]
or
[tex]F_x = \frac{\partial}{\partial X} (\frac{C_6}{X^6})[/tex]
or
[tex]F_x = -\frac{6 C_6}{2^7}[/tex]
As we can see that the [tex]C_6[/tex] comes in positive and constant which represents that the force is negative that means the force is attractive in nature
An infinite sheet carries a uniform, positive charge per unit area. The electric field produced by the sheet is represented by parallel lines drawn with a density N lines per m2 that are perpendicular to and away from the sheet. The charge per unit area on the sheet is doubled. How should the density of the electric field lines be changed
Complete Question
An infinite sheet carries a uniform, positive charge per unit area. The electric field produced by the sheet is represented by parallel lines drawn with a density N lines per m2 that are perpendicular to and away from the sheet. The charge per unit area on the sheet is doubled. How should the density of the electric field lines be changed?
A It should stay the same
B It should be quadrupled.
C It should be quintupled
D It should be doubled.
E It should be tripled
Answer:
Option D is the correct option
Explanation:
Generally electric field is mathematically represented as
[tex]E = \frac{\sigma}{\epsilon_o}[/tex]
Where [tex]\sigma[/tex] is the charge per unit area (Charge density )
From the question we are told that [tex]\sigma[/tex] is doubled hence the
[tex]E = \frac{2 \sigma }{\epsilon_o}[/tex]
Looking the equation above we see that the value of the electric field will also double given that it is directly proportional to the charge density
please help
Complete the first and second sentences, choosing the correct answer from the given ones.
1. A temperature of 100 K corresponds on a Celsius scale to 100 ° C / 0 ° C / 173 ° C / –173 ° C.
2. At 50 ° C, it corresponds to a Kelvin scale of 150 K / 323 K / 273 K / 223 K.
1) 100 ° C
2) 323 K
hope it helps youuuuuu
A 1KW electric heater is switched on for ten minutes
How much heat does it produce?
Explanation:
P=W/T ==> 1000w = Q/600 ==> Q=600000j
If a 1 - kilowatt electric heater is switched on for ten minutes then the heat produced by the electric heater would be 600 - kilo Joules .
What is thermal energy ?It can be defined as the form of the energy in which heat is transferred from one body to another body due to their molecular movements, thermal energy is also known as heat energy .
As given in the problem , we have to find out the heat produced by the 1 - kilo watts electric heater if it is switched on for ten minutes ,
The heat produced by the electric heater = Power × time
= 1000 × 600 Joules
= 600 kilo - Joules
Thus , the heat produced by the electric heater would be 600 - kilo Joules .
To learn more about thermal energy here , refer to the link ;
brainly.com/question/3022807
#SPJ2
Blocks of mass 10, 30, and 90 kg are lined up from left to right in that order on a frictionless surface so each block is touching the next one. A rightward-pointing force of magnitude 32 N is applied to the left-most block. 1) What is the magnitude of the force that the left block exerts on the middle one
Answer:
32N
Explanation:
The Left force exerts an opposite horizontal force of 32N on the middle object
A 20 g "bouncy ball" is dropped from a height of 1.8 m. It rebounds from the ground with 80% of the speed it had just before it hit the ground. Assume that during the bounce the ground causes a constant force on the ball for 75 ms. What is the force applied to the ball by the ground in N?
The following are not correct: 0.513 N, 0.317 N, 0.121 N. Please show your work so I can understand!
Answer:
F = 0.314 N
Explanation:
In order to calculate the applied force to the ball by the ground, you first calculate the speed of the ball just before it hits the ground. You use the following formula:
[tex]v^2=v_o^2+2gy[/tex] (1)
y: height from the ball starts its motion = 1.8 m
vo: initial velocity = 0 m/s
g: gravitational acceleration = 9.8 m/s^2
v: final velocity of the ball = ?
You replace the values of the parameters in the equation (1):
[tex]v=\sqrt{2gy}=\sqrt{2(9.8m/s^2)(1.8m)}=5.93\frac{m}{s}[/tex]
Next, you take into account that the force exerted by the ground on the ball is given by the change, on time, of the linear momentum of the ball, that is:
[tex]F=\frac{\Delta p}{\Delta t}=m\frac{\Delta v}{\Delta t}=m\frac{v_2-v_1}{\Delta t}[/tex] (2)
m: mass of the ball = 20g = 20*10^-3 kg
v1: velocity of the ball just before it hits the ground = 5.93m/s
v2: velocity of the ball after it impacts the ground (80% of v1):
0.8(5.93m/s) = 4.75 m/s
Δt: time interval o which the ground applies the force on the ball = 75*10^-3 s
You replace the values of the parameters in the equation (2):
[tex]F=(20*10^{-3}kg)\frac{4.75m/s-5.93m/s}{75*10^{-3}s}=-0.314N[/tex]
The minus sign means that the force is applied against the initial direction of the motion of the ball.
The applied force by the ground on the bouncy ball is 0.314 N
first law of equilibrium
Answer:
for an object to be in equilibrium, it must be experiencing no acceleration. Both the net force and the net torque must be zero.
Hope I helped
Answer:
An object in static equilibrium has zero net force acting upon it.
The First Condition of Equilibrium is that the vector sum of all the forces acting on a body vanishes. This can be written as
F = F1+ F2+ F3+ F4+. . . = 0
At a time when mining asteroids has become feasible, astronauts have connected a line between their 3220-kg space tug and a 6240-kg asteroid. They pull on the asteroid with a force of 362 N. Initially the tug and the asteroid are at rest, 311 m apart. How much time does it take for the ship and the asteroid to meet
-- F = m a ... ==> a = F/m
-- The tension in the rope is 362 N. That same force acts on the asteroid and on the tug, pulling them together.
-- The asteroid's acceleration is 362N / 6240 kg = 0.058 m/s², headed for a point on the rope somewhere between the asteroid and the tug.
-- The tug's acceleration is 362 N / 3220 kg = 0.112 m/s², also headed for a point on the rope somewhere between the tug and the asteroid.
-- So now we have a gap between them, initially 311 m long, closing with a speed that starts at zero and accelerates at 0.170 m/s² .
-- D = (1/2) a T²
311 m = (1/2) (0.170 m/s²) (T²)
T² = 311 m / 0.085 m/s²
T = √(311/0.085) seconds
T = 60.41 seconds
The answer I get is so durn near 60 seconds (1 minute) that it suggests two things to me: ==> That's where the weird numbers of 362N and 311m came from, and ==> there's a good chance that my answer is correct.
Note: It's important to me that you know that 5 points for this one is really cheap and chintzy, and the reason I decided to try it was only to see whether I could.
A uniform rod of mass 2.30 kg and length 2.00 m is capable of rotating about an axis passing through its center and perpendicular to its length. A mass m1 = 5.30 kg is attached to one end and a second mass m2 = 3.50 kg is attached to the other end of the rod. Treat the two masses as point particles.
A) What is the moment of inertia of the system?B) If the rod rotates with an angular speed of 2.00 rad/s, how much kinetic energy does the system have?C) Now consider the rod to be of negligible mass. What is the moment of inertia of the rod and masses combined?D) If the rod is of negligible mass, what is the kinetic energy when the angular speed is 2.00 rad/s?
Answer:
Explanation:
Moment of inertia of the rod = 1/12 m L²
m is mass of the rod and L is its length
= 1/2 x 2.3 x 2 x 2
= 4.6 kg m²
Moment of inertia of masses attached with the rod
= m₁ d² + m₂ d²
m₁ and m₂ are masses attached , and d is their distance from the axis of rotation
= 5.3 x 1² + 3.5 x 1²
= 8.8 kg m²
Total moment of inertia = 13.4 kg m²
B )
Rotational kinetic energy = 1/2 I ω²
I is total moment of inertia and ω is angular velocity
= .5 x 13.4 x 2²
= 26.8 J .
C )
when mass of rod is negligible , moment of inertia will be due to masses only
Total moment of inertia of masses
= 8.8 kg m²
D )
kinetic energy of the system
= .5 x 8.8 x 2²
= 17.6 J .
(A) Total moment of inertia is 13.4 kgm²
(B) Total kinetic energy is 26.8J
(C) Moment of inertia is 8.8 kgm²
(D) Kinetic energy is 17.6J
Rotational motion:
(A) The moment of inertia of the rod is given by:
I = 1/12 mL²
where m is the mass of the rod
and L is the length
So,
I = (1/12) × 2.3 × 2²
I = 4.6 kgm²
Now, the moment of inertia of masses attached to the rod is given by:
I' = m₁ d² + m₂d²
where m₁ and m₂ are masses
and d is their distance from the axis of rotation
I' = 5.3 × 1² + 3.5 × 1²
I' = 8.8 kgm²
The total moment of inertia of the system is given by:
I(tot) = I + I'
I(tot) = 13.4 kgm²
(B) The rotational kinetic energy of an object with a moment of inertia I and angular velocity ω is given by:
KE = 1/2 I(tot)ω²
KE = 0.5 × 13.4 × 2²
KE = 26.8J
(C) If the mass of the rod is negligible, then the moment of inertia of the rod will be zero. So the total moment of inertia will be
I(tot) = I' = 8.8 kgm²
(D) the kinetic energy of the system when the mass of the rod is negligible and the angular speed is 2 rad/s is given by:
KE = 1/2 I'ω²
KE = 0.5 × 8.8 × 2²
KE = 17.6J
Learn more about rotational motion:
https://brainly.com/question/15120445?referrer=searchResults
Olaf is standing on a sheet of ice that covers the football stadium parking lot in Buffalo, New York; there is negligible friction between his feet and the ice. A friend throws Olaf a ball of mass 0.400 kg that is traveling horizontally at 11.3 m/s. Olaf's mass is 75.0 kg. (a) If Olaf catches the ball, with what speed v_f do Olaf and the ball move afterward
Answer:
v = 0.059 m/s
Explanation:
To find the final speed of Olaf and the ball you use the conservation momentum law. The momentum of Olaf and the ball before catches the ball is the same of the momentum of Olaf and the ball after. Then, you have:
[tex]mv_{1i}+Mv_{2i}=(m+M)v[/tex] (1)
m: mass of the ball = 0.400kg
M: mass of Olaf = 75.0 kg
v1i: initial velocity of the ball = 11.3m/s
v2i: initial velocity of Olaf = 0m/s
v: final velocity of Olaf and the ball
You solve the equation (1) for v and replace the values of all variables:
[tex]v=\frac{mv_{1i}}{m+M}=\frac{(0.400kg)(11.3m/s)}{0.400kg+75.0kg}=0.059\frac{m}{s}[/tex]
Hence, after Olaf catches the ball, the velocity of Olaf and the ball is 0.059m/s
What is the highest point at which weather will generally occur?
Answer:
At thestratosphere: it 20- 25km
A 1,269 kg rocket is traveling at 413 m/s with 2,660 kg of fuel on board. If the rocket fuel travels at 1,614 m/s relative to the rocket, what is the rockets final velocity after it uses half of its fuel?
Answer:
About 2104m/s
Explanation:
[tex]F=ma \\\\F=\dfrac{2660kg}{2}\cdot 1614m/s=2,146,620N \\\\2,146,620N=1,269kg\cdot a \\\\a\approx 1691m/s \\\\v_f=v_o+at=413m/s+1691m/s=2104m/s[/tex]
Hope this helps!
An arrow is shot from a height of 1.55 m toward a cliff of height H. It is shot with a velocity of 26 m/s at an angle of 60° above the horizontal. It lands on the top edge of the cliff 3.99 s later.
(a) Draw a sketch of the given example. Include the x-y coordinate system.
(b) What is the height of the cliff?
(c) What is the maximum height reached by the arrow along its trajectory?
(d) What is the arrow's impact speed just before hitting the cliff?
Answer:
Explanation:
vertical component of the velocity of arrow
= 26 sin 60 = 22.516 m
height reached by it after 3.99 s
h = ut - 1/2 g t²
= 22.516 x 3.99 - .5 x 9.8 x 3.99²
= 89.83 - 78
11.83 m
Total height of cliff = 1.55 + 11.83
= 13.38 m
c ) maximum height covered s
v² = u² - 2gs
0 = u² - 2gs
s = u² / 2g
= 22.516² / 2 x 9.8
= 25.86
maximum height reached
= 25.86 + 1.55
= 27.41 m
d )
vertical speed after 3.99 s
v = u - gt
= 22.516 - 9.8 x 3.99
= -16.586
Horizontal component will remain unchanged
Horizontal component = 26 cos 60
= 13 m /s
Resultant of two velocities
= √ 13²+ 16.568²
= 21 m /s
first law of equilibrium
Answer:
For an object to be an equilibrium it must be experiencing no acceleration.
Explanation:
Hope it helps.
I really need help with this question someone plz help !
Answer:weight
Explanation:weight
