A(n) ____________ is a group of similar or identical computers, connected by a high-speed network, that cooperate to provide services or run a shared application.

Answer: C. Swap File

Explanation: Swap files provide some space for programs for the computer and virtual memory.

The term that refers to the area of the hard drive used for virtual memory is a swap file. The correct option is c.

Operating systems use virtual memory, a different set of memory addresses, along with the hardware reserve to increase the total number of addresses (actual memory plus virtual memory). The virtual addresses are changed into actual memory addresses when the application is really run.

A swap file is a hard drive space that serves as a computer's virtual memory expansion (RAM). A computer can use more memory than what is actually installed in it by employing a swap file.

In order to save space, data from RAM is "swapped" onto a file or area on the hard drive. Data is switched back and forth from the RAM to the swap file as you switch between the apps.

Therefore, the correct option is c. swap file.

To learn more about virtual memory, refer to the link:

https://brainly.com/question/13441089

#SPJ2

The time component of the FITT-VP principle for overload in a muscular strength program is D. based on the number of sets and repetitions of specific exercises.

It should be noted that a strength program is a form of exercise that's done to increase one's strength.

In this case, the time component of the FITT-VP principle for overload in a muscular strength program is based on the number of sets and repetitions of specific exercises.

Learn more about strength program on:

brainly.com/question/1962479

#SPJ12

Answer:

B. Software

Explanation:

A set of instructions that directs a computer's hardware to perform a task is called a program, or software program.

In the above, Software  are instructions to the computer.

What are Software?

This is known to be a composition of instructions or programs that informs a computer of what need to be done and also  how to perform a given task.

Note that Software are seen as an opposite to hardware and the term Software is a generic term that is often used in place of applications, scripts or any programs that is said to  run on a device.

Therefore, In the above, Software  are instructions to the computer.

Learn more about Software  from

https://brainly.com/question/1538272

#SPJ11

Answer:

Hopefully This Will Help

Explanation:

If the input is:

2000

2

Then the output is:

1000 500 250

The transmission that is more efficient is the full duplex transmission.

A database simply means an organized collection of a structured information in a computer program.

In this case, when a company uses multimedia applications in addition to normal file and database sharing, the efficient transmission is the full duplex transmission.

Learn more about database on:

brainly.com/question/26096799

#SPJ12

The statement which isn't an advantage of replication of data with respect to directory services is that it allows you to locally manage user accounts.

A directory service is a software system designed and developed to store, organize and provide end users with a name and an access to directory information, so as to effectively and efficiently unify (synchronize) all network resources.

In this context, we can infer and logically deduce that the statement which isn't an advantage of replication of data with respect to directory services is that it allows you to locally manage user accounts.

Read more on directory services here: https://brainly.com/question/15187174

#SPJ12

In order to access the Internet through the PSTN, a connectivity device that you must use is a modem.

A modem can be defined as a type of networking device that is designed and developed to convert the signals from the wire such as a telephone line, so that data can be sent and received by a computer.

In Computer networking, modem is a connectivity device that you must use to access the Internet through the Public Telephone Service Network (PSTN).

Read more on modem here: https://brainly.com/question/7320816

#SPJ12

Skill acquisition plans include goals, objectives, materials, and data collection.

A skill acquisition plan can be defined as a written plan that is used to outline the goals, objectives, materials, teaching methods, and data collection techniques for teaching trainees a specific skill or set of skills.

This ultimately implies that, skill acquisition plans include all of the following:

Read more on skill acquisition plans here: https://brainly.com/question/15352575

#SPJ12

Answer:

MIN

Explanation:

The MIN () function returns the expression's minimal or lowest value. It disregards NULL values in columns.

The SQL keyword that is often used to retrieve a minimum value from an attribute in a table is the MIN function.

The MIN Function is known to be a group found under Excel Statistical functions.

Note that the MIN often return the minimum value in any list of arguments and as such The SQL keyword that is often used to retrieve a minimum value from an attribute in a table is the MIN function.

Learn more about SQL from

https://brainly.com/question/25694408

#SPJ11

The setting will cause an error when they set up a single SDF with both line item and insertion order rows.

Structured Data Files (SDF) are known to be a form of spreadsheets that are seen as csv files that is said to be very cheap to make and edit campaigns, insertion orders and others.

Note that The setting will cause an error when they set up a single SDF with both line item and insertion order rows.

See options below

They set up an SDF with rows for both editing and removing line items.

They set up an SDF for modifying inventory sources.

They set up an SDF with 100 line items in a single file.

They set up a single SDF with both line item and insertion order rows.

Learn more about structured data files from

#SPJ1

Most source code is typically available on the internet in tarball format or as a git repository. Therefore, it's true.

It should be noted that a source code simply means programming statement that area created by the programmer and saved in a file.

In this case, most source code is typically available on the internet in tarball format or as a git repository. Therefore, it's true.

Learn more about source code on:

brainly.com/question/4593389

#SPJ12

Once a computer system is appropriately built, secured, and deployed, the process of maintaining security is continuous.

Information security is a preventive practice that is used to protect an information system (IS) or computer system from potential theft, attack, damage, or unauthorized access, especially through the use of a body of processes and technology.

As a general rule, once a computer system is appropriately built, secured, and deployed, the process of maintaining security is continuous.

Read more on information security here: brainly.com/question/14286078

#SPJ12

The symptom of an incorrectly applied network command when issued under the routing process is a timeout message when attempting to ping a device on another network.

Routing is the process of selecting a path for traffic in a network.

In this case, the symptom of an incorrectly applied network command when issued under the routing process is a timeout message when attempting to ping a device on another network.

Learn more about routing on:

brainly.com/question/24812743

#SPJ12

The subnet mask 255. 255. 255. 0 tell a router the part of an IP address that has or that is the subnet ID and the part that is host ID.

The aim of the part of the mask that reads 255 is one that  tell a router the part of an IP address that is said to  be the subnet ID.

Note that A subnet mask helps to know which aspect of the IP address are known as the network and host identifiers.

Therefore, The subnet mask 255. 255. 255. 0 tell a router the part of an IP address that has or that is the subnet ID and the part that is host ID.

Learn more about subnet mask from

https://brainly.com/question/12858865

#SPJ12

Router# show IP IPS configuration is a command which can be used to verify the Cisco IOS IPS configuration.

A command can be defined as the set of instructions that is used to configure a network device such as a router, so as to make it active on a computer network and enable it perform certain tasks automatically during network communication.

In this scenario, Router# show IP IPS configuration is a command which can be used to verify the Cisco IOS IPS configuration.

Read more on commands here: brainly.com/question/17147683

#SPJ12

The most probable reason why your code for the dog turning right instead of is because your conditional statements are not satisfied.

This refers to the identification and removal of errors in a given code or hardware component.

Hence, we can see that you should note that you are using teh ifElse conditional statement to execute your code and you stated that the dog would turn right if:

Therefore, there are balls present and also the left side is blocked which causes your dog to turn right because it is executing the else statement.

Read more about debugging here:

https://brainly.com/question/16813327

#SPJ1

A DSL is used to transmit high-bandwidth digital data over telephone lines.

DSL is known to be a kind of a technology that is made for high-speed network or is one that is used via Internet access over voice lines.

Therefore, A DSL is used to transmit high-bandwidth digital data over telephone lines.

Learn more about modem from

https://brainly.com/question/7320816

#SPJ11

The difference between a database and a table is that the database is a collection of several components like tables, and stored procedure.

It should be noted that a metadata simply means a set of data which describes and gives information about the other data.

In this case, the difference between a database and a table is that the database is a collection of several components like tables, and stored procedure

Learn more about database on:

brainly.com/question/26096799

#SPJ12

Answer:

100101= 37....

Explanation:

Hope it helps you.....

Answer:

37

I believe it will help you maybe, hope it helps you

Sequences, selection, and repetition are the steps including the example of a sequence programming construct.

The CPU is instructed on which statement should be performed next via a sequence construct.

In most common languages, this is usually either the statement that comes before the current statement or the very first statement in the program. In other words, this is the fundamental building block of programming.

There are several well-known fundamental programming structures that fall into the following categories:

Sequences (First Floor)

Selection (Second Floor)

Repetition (Third Floor)

Hence, sequences, selection, and repetition are the sequence including the example of a sequence programming construct.

To learn more about sequence programming construct refer;

https://brainly.com/question/20519187

#SPJ1

The transport layer must break messages received from the application layer into several packets that can be sent to the network layer.

In Computer networking, there are seven main layers in the open systems interconnection (OSI) model and these include the following in a sequential order;

As a standard, it is a must that the transport layer break messages that are received from the application layer into several packets that can be sent to the network layer.

Read more on transport layer here: https://brainly.com/question/26177113

#SPJ12

Note that in the case above, Cloud architecture has unlimited Accessibility.

The cloud storage is one that often depends on the cloud service provider and it is one that often give unlimited cloud storage and Accessibility for all.

Therfore, Note that in the case above, Cloud architecture has unlimited Accessibility as everyone can access it whenever they want.

Learn more about Cloud architecture from

https://brainly.com/question/11934271

#SPJ12

The date for the social security recipients to expect the 4th stimulus check was from Wednesday, April 13, 2022.

There is said to be the fourth round of Social Security checks that is known to be coming to every household.

Note that the date for the social security recipients to expect the 4th stimulus check was from Wednesday, April 13, 2022.

Learn more about social security  from

https://brainly.com/question/1156607

#SPJ1

In the case above, the operation is not efficiently supported by heaps is Find.

The operation that are known to often use heaps are:

Therefore, In the case above, the operation is not efficiently supported by heaps is Find.

See full question below

Which operation is not efficiently supported by heaps?

a. DeleteMin

b. Find

c. FindMin

d. Insert

e. all of the above are sufficiently supported

Learn more about operation from

https://brainly.com/question/24214198

#SPJ11

The program is an illustration of loops; Loops are used for repetition

The program written in Python, where comments are used to explain each line is as follows:

#This gets input for the number

n = int(input())

#This initializes the sum to 0

sumTotal = 0

#This iterates through the digits

for x in str(n):

   #This adds each digit

   sumTotal+=int(x)

   #This prints each digit

   print(x,end =' ')

#This prints a new line

print()

#This prints the total

print(sumTotal)

Read more about loops at:

https://brainly.com/question/24833629

#SPJ1

Using the computational language in JAVA it is possible to write a code that at least passes an unspecified number of integers

class Exercise07_21

{

public static void main(String args[])

{

int sum=0;

for(int i=0;i<args.length;i++)

sum=sum+Integer.parseInt(args[i]);//converting string to integer and then adding it with sum variable and storing back in sum

System.out.println("The total is "+sum);//printing the sum

}

}

See more about JAVA code at brainly.com/question/12975450

#SPJ1

Scrum master can help the team focus on daily and iteration goals as it:

It is known to be a kind of problem-solving methods that helps a team become very good at problem-solvers for themselves. Note that it often Facilitates  team events and others.

Therefore, Scrum master can help the team focus on daily and iteration goals as it:

See options below

To keep the Team Backlog to a manageable size

To eliminate impediments

To help the team maintain their velocity

To facilitate the team's progress towards the current PI Objectives

Learn more about scrum master from

https://brainly.com/question/4763588

#SPJ12

The answer that is a record in a relational database is called; A row

In relational databases, a record is defined as a group of related data held within the same structure. Furthermore, we can say that a record is a grouping of fields within a table that reference one particular object.

Now, in relational database, a row is called a record because each row, contains a unique instance of data or key for the categories defined by the columns.

Read more about Relational Database at; https://brainly.com/question/13262352

#SPJ12