Complete Question
An infinite sheet carries a uniform, positive charge per unit area. The electric field produced by the sheet is represented by parallel lines drawn with a density N lines per m2 that are perpendicular to and away from the sheet. The charge per unit area on the sheet is doubled. How should the density of the electric field lines be changed?
A It should stay the same
B It should be quadrupled.
C It should be quintupled
D It should be doubled.
E It should be tripled
Answer:
Option D is the correct option
Explanation:
Generally electric field is mathematically represented as
[tex]E = \frac{\sigma}{\epsilon_o}[/tex]
Where [tex]\sigma[/tex] is the charge per unit area (Charge density )
From the question we are told that [tex]\sigma[/tex] is doubled hence the
[tex]E = \frac{2 \sigma }{\epsilon_o}[/tex]
Looking the equation above we see that the value of the electric field will also double given that it is directly proportional to the charge density
Use the Lab screen to expand your ideas about what affects the landing location and path of a projectile. List any discoveries you made to identify additional things that affect the landing site of a projectile and/or path of a projectile. Next to each item, briefly explain why you think the motion of the projectile is affected..
Answer:
* air resistance.
*the direction of the rotation of the Earth
rotation of the thrown body
Explanation:
The projectile launch is described by the expressions
x-axis x = v₀ₓ t
y-axis y = [tex]v_{oy}[/tex] t - ½ gt²
When the things that affect this movement are analyzed, in order of importance we have:
* air resistance. This significantly changes the body's horizontal position, so it introduces a horizontal acceleration that is not contained in the equations.
* air resistance. At the height that the body reaches, since air resistance has the same direction as the gravity of gravity and therefore the relationship is more challenging.
* to a lesser extent the direction of launch, in the direction of the rotation of the Earth against. Since this creates an operational on the x and y axis that changes the initial assumption
* The possible rotation of the thrown body, since this rotation creates a lift that is not taken in the equations, this value is more noticeable the lighter the body, this effect has to keep the body longer in the air achieving more reach and height
Six automobiles are initially traveling at the indicated velocities. The automobiles have different masses and velocities. The drivers step on the brakes and all automobiles are brought to rest.
Car A: 500 kg, 10 m/s,
Car B: 2000 kg, 5 m/s,
Car C: 500 kg, 20 m/s,
Car D: 1000 kg, 20 m/s,
Car E: 4000 kg, 5 m/s, and
Car F: 1000 kg, 10 m/s.
(a) Rank these automobiles based on the magnitude of their momentum before the brakes are applied, from largest to smallest.
(b) Rank these automobiles based on the magnitude of the impulse needed to stop them, from largest to smallest.
Answer:
a)Car E = Car D > (Car F = Car B = Car C) > Car A
b)Car E = Car D > (Car F = Car B = Car C) > Car A
Explanation:
Car A: mass = 500 kg; speed = 10 m/s
Car B: mass = 2000 kg;speed = 5 m/s
Car C:mass = 500 kg; speed = 20 m/s
Car D: mass = 1000 kg; speed = 20 m/s
Car E:mass = 4000 kg; speed = 5 m/s
Car F: mass = 1000 kg; speed = 10 m/s
Part a) Now we know that momentum of each car is product of mass and velocity , so we will have
CarA:
[tex]P_1 = m \times v\\P_1 = (500)(10)\\P_1 = 5 \times 10^3 kg m/s[/tex]
Car B:
[tex]P_2 = m v\\P_2 = (2000)(5)\\P_2 = 10^4 kg m/s[/tex]
Car C:
[tex]P_3 = m v\\P_3 = (500)(20)\\P_3 = 10^4 kg m/s[/tex]
Car D:
[tex]P_4 = m v\\P_4 = (1000)(20)\\P_4 = 2\times 10^4 kg m/s[/tex]
Car E:
[tex]P_5 = m v\\P_5 = (4000)(5)\\P_5 = 2\times 10^4 kg m/s[/tex]
Car F:
[tex]P_6 = m v\\P_6 = (1000)(10)\\P_6 = 10^4 kg m/s[/tex]
So the momentum is given as ,
Car E = Car D > (Car F = Car B = Car C) > Car A
Part b)Impulse is given as change in momentum so here we can say that final momentum of all the cars will be zero as they all stops and hence the impulse is same as initial momentum of the car
so the order of impulse from largest to least is given as
Car E = Car D > (Car F = Car B = Car C) > Car A
determine the smallest mass of lead that when tied using a string to a wooden boat on a pond will be enough to sink the toy boat. assuming specific gravity of wood is 0.5 and density of water is 1000kg per cubic metre?
still really need help with these three questions!!
Explanation:
2. No, not always. Normal force is equal to force of gravity only when there's no acceleration in the vertical direction.
For example, when you stand in an elevator that's not moving, or moving at constant speed, then the normal force equals your weight. But when the elevator accelerates upward, the normal force increases (making you feel heavier). And when the elevator slows down, the normal force decreases (making you feel lighter).
3. Yes, it is possible for an object to be moving eastward and experience a net force westward. An example is a car applying the brakes.
4. Friction force allows you to walk. When you push against the floor, the floor's friction pushes back, as Newton's third law says.
If you try to walk on a slippery surface like ice, you won't be able to push against the ice, and the ice won't push back.
Why do some nucleus emit electrons?
Answer:
In beta-minus decay, a neutron breaks down to a proton and an electron, and the electron is emitted from the nucleus. In beta-plus decay, a proton breaks down to a neutron and a positron, and the positron is emitted from the nucleus.
Explanation:
Hope this helps!
A sulfur dioxide molecule has one sulfur
atom and two oxygen atoms. Which is its
correct chemical formula?
A. SO2
C. S2O2
B. (SO)
D. S20
Answer:
a. SO2
Explanation:
A ride-sharing car moving along a straight section of road starts from rest, accelerating at 2.00 m/s2 until it reaches a speed of 28.0 m/s. Then the vehicle moves for 41.0 s at constant speed until the brakes are applied, stopping the vehicle in a uniform manner in an additional 5.00 s.
(a) How long is the ride-sharing car in motion (in s)?
(b) What is the average velocity of the ride-sharing car for the motion described? (Enter the magnitude in m/s.)
Answer:
Explanation:
Time taken to accelerate to 28 m /s
= 28 / 2 = 14 s
a ) Total length of time in motion
= 14 + 41 + 5
= 60 s .
b )
Distance covered while accelerating
s = ut + 1/2 at²
= 0 + .5 x 2 x 14²
= 196 m .
Distance covered while moving in uniform motion
= 28 x 41
= 1148 m
distance covered while decelerating
v = u - at
0 = 28 - a x 5
a = 5.6 m / s²
v² = u² - 2 a s
0 = 28² - 2 x 5.6 x s
s = 28² / 2 x 5.6
= 70 m .
Total distance covered
= 196 + 1148 + 70
= 1414 m
total time taken = 60 s
average velocity
= 1414 / 60
= 23.56 m /s .
What is the momentum of an 8kg bowling ball rolling at 2m/s
Answer:
16kg m/s
Explanation:
P=mv
8 times 2=16kg m/s
Answer:
The momentum of moving body is calculated by
p= mv
In this question m= 8kg
v= 2m/s
so p = 8*2 = 16 kg m/s.
"Mass in motion" can be used to describe momentum. Mass exists in all things. Therefore, if an object is moving, it has momentum—its mass is moving. There are two factors that determine an object's momentum level: how much and how quickly the objects are moving.
Mass and velocity are two variables that affect momentum. An object's momentum can be expressed mathematically as the product of its mass multiply by its velocity.
The equation above can be rewritten as p = m • v, where m is the mass and v is the velocity, since momentum is represented by the lower case p in physics. The equation demonstrates that an object's momentum is directly proportional to its mass and velocity.
The quantity momentum is a vector. A vector quantity is a quantity that is fully described by magnitude and direction, as was discussed in a previous unit. Information about the bowling ball's magnitude as well as its direction must be included in order to fully describe the momentum of a 5-kg ball traveling westward at 2 m/s. The ball has a momentum of 10 kg m/s.
Until information about the ball's direction is provided, the ball's momentum cannot be fully described. The direction of the ball's velocity and the direction of the momentum vector are identical. It was mentioned in a previous unit that the velocity vector moves in the same way that an object moves. The bowling ball's momentum can be fully described as 10 kg m/s westward if it is moving westward. The magnitude and direction of an object's momentum can be used to fully describe it as a vector quantity.
For more details about momentum check these:
brainly.com/question/12098941
#SPJ2
What is the period of a wave if the frequency is? 5 Hz
Answer: If the woodpecker drums upon a tree 5 times in one second, then the frequency is 5 Hz; each drum must endure for one-fifth a second, so the period is 0.2 s.
A soccer player is benched for being late to the game. In a fit of anger, she drops her ball from the top of the Physics building. It falls 4.9 meters after 1.0 second has elapsed. How much farther does it fall in the next 2.0 seconds
Answer:
The distance is [tex]S = 39.2 \ m[/tex]
Explanation:
From the question we are told that
The distance covered after t = 1 s is [tex]d = 4.9 \ m[/tex]
According to the equation of motion
[tex]v^2 = u^2 + 2ad[/tex]
Now u = 0 m/s since before the drop the ball was at rest
[tex]v^2 = 2ad[/tex]
here [tex]a =g = 9.8 \ m/s^2[/tex]
So
[tex]v = 9.8 m/s[/tex]
Also from equation of motion we have that
[tex]S = ut + \frac{1}{2} at^2[/tex]
Now at t = 2 s , as given from the question
Then u = v = 9.8 m/s
And
[tex]S = 9.8 * 2 + \frac{1}{2} * (9.8) * (2^2)[/tex]
[tex]S = 9.8 * 2 + \frac{1}{2} * (9.8) * (2^2)[/tex]
[tex]S = 39.2 \ m[/tex]
An 80-kg quarterback jumps straight up in the air right before throwing a 0.43-kg football horizontally at 15 m/s . How fast will he be moving backward just after releasing the ball?
Sort the following quantities as known or unknown. Take the horizontal direction to be along the x axis.
mQ: the mass of the quarterback
mB: the mass of the football
(vQx)i: the horizontal velocity of quarterback before throwing the ball
(vBx)i: the horizontal velocity of football before being thrown
(vQx)f: the horizontal velocity of quarterback after throwing the ball
(vBx)f: the horizontal velocity of football after being thrown
Answer:
vBxf = 0.08625m/s
Explanation:
This is a problem about the momentum conservation law. The total momentum before equals the total momentum after.
[tex]p_f=p_i[/tex]
pf: final momentum
pi: initial momentum
The analysis of the momentum conservation is about a horizontal momentum (x axis). When the quarterback jumps straight up, his horizontal momentum is zero. Then, after the quarterback throw the ball the sum of the momentum of both quarterback and ball must be zero.
Then, you have:
[tex]m_Qv_{Qxi}+m_{Bxi}v_{Bxi}=m_Qv_{Qxf}+m_{Bxf}v_{Bxf}[/tex] (1)
mQ: the mass of the quarterback = 80kg
mB: the mass of the football = 0.43kg
(vQx)i: the horizontal velocity of quarterback before throwing the ball = 0m/s
(vBx)i: the horizontal velocity of football before being thrown = 0m/s
(vQx)f: the horizontal velocity of quarterback after throwing the ball = ?
(vBx)f: the horizontal velocity of football after being thrown = 15 m/s
You replace the values of the variables in the equation (1), and you solve for (vBx)f:
[tex]0\ kgm/s=-(80kg)(v_{Bxf})+(0.46kg)(15m/s)\\\\v_{Bxf}=\frac{(0.46kg)(15m/s)}{80kg}=0.08625\frac{m}{s}[/tex]
Where you have taken the speed of the quarterback as negative because is in the negative direction of the x axis.
Hence, the speed of the quarterback after he throws the ball is 0.08625m/s
The cornea behaves as a thin lens of focal lengthapproximately 1.80 {\rm cm}, although this varies a bit. The material of whichit is made has an index of refraction of 1.38, and its front surface is convex,with a radius of curvature of 5.00 {\rm mm}.(Note: The results obtained here are not strictlyaccurate, because, on one side, the cornea has a fluid with arefractive index different from that of air.)a) If this focal length is in air, what is the radius ofcurvature of the back side of the cornea? (in mm)b) The closest distance at which a typical person can focus onan object (called the near point) is about 25.0 {\rm cm}, although this varies considerably with age. Wherewould the cornea focus the image of an 10.0 {\rm mm}-tall object at the near point? (in mm)c) What is the height of the image in part B? (mm)d) Is this image real or virtual? Is it erect orinverted?
Answer:
Explanation:
a )
from lens makers formula
[tex]\frac{1}{f} =(\mu-1)(\frac{1}{r_1} -\frac{1}{r_2})[/tex]
f is focal length , r₁ is radius of curvature of one face and r₂ is radius of curvature of second face
putting the values
[tex]\frac{1}{1.8} =(1.38-1)(\frac{1}{.5} -\frac{1}{r_2})[/tex]
1.462 = 2 - 1 / r₂
1 / r₂ = .538
r₂ = 1.86 cm .
= 18.6 mm .
b )
object distance u = 25 cm
focal length of convex lens f = 1.8 cm
image distance v = ?
lens formula
[tex]\frac{1}{v} - \frac{1}{u} = \frac{1}{f}[/tex]
[tex]\frac{1}{v} - \frac{1}{-25} = \frac{1}{1.8}[/tex]
[tex]\frac{1}{v} = \frac{1}{1.8} -\frac{1}{25}[/tex]
.5555 - .04
= .515
v = 1.94 cm
c )
magnification = v / u
= 1.94 / 25
= .0776
size of image = .0776 x size of object
= .0776 x 10 mm
= .776 mm
It will be a real image and it will be inverted.
A 2-kilogram toy car is traveling forward at 1 meter per second when it is hit in the rear by a 3-kilogram toy truck that was traveling at 3 meters per second just before impact. If the two toys stick together, their speed immediately after the collision is
Answer:
v = 1.4 m/s
Explanation:
This problem is about an inelastic collision. The total momentum before the collision is equal to total momentum after (because of the conservation of momentum law):
[tex]m_1v_1-m_2v_2=(m_1+m_2)v[/tex] (1)
m1: mass of the toy car = 2 kg
m2: mass of the toy truck = 3 kg
v1: speed of the toy car = 1 m/s
v2: speed of the truck car = 3 m/s
v: speed of both car and truck after the collision = ?
In the equation (1) the negative sign of m2v2 is because of the opposite direction of the toy truck respect to the toy car.
You solve the equation (1) for v, and you replace the values of all variables involved:
[tex]v=\frac{m_1v_1-m_2v_2}{m_1+m_2}\\\\v=\frac{(2kg)(1m/s)-(3kg)(3m/s)}{2kg+3kg}=-1.4\frac{m}{s}[/tex]
this velocity is negative, then, the direction of motion of both car and truck is in the direction of the truck
Hence, the speed of both car and truck toys is 1.4 m/s
The lowest-pitch tone to resonate in a pipe of length L that is closed at one end and open at the other end is 200 Hz. Which one of the following frequencies will NOT resonate in the same pipe
a. 1800 Hz
b. 1000 Hz
c. 1400 Hz
d. 600 Hz
e. 400 Hz
Answer:
e. 400 Hz
Explanation:
In closed organ pipe, only odd harmonics of fundamental note is possible .
The fundamental frequency is 200 Hz . Then other overtones will be having following frequencies .
200 x 3 , 200 x 5 , 200 x 7 , 200 x 9 etc
600 Hz , 1000 Hz , 1400 Hz , 1800 Hz .
Frequency not possible is 400 Hz .
A 2 kg car moving towards the right at 4 m/s collides head on with an 8 kg car moving towards the left at 2 m/s, and they stick together. After the collision, the velocity of the combined bodies is:_____________.
a) 2.4 m/s towards the left.
b) 2.4 m/s towards the right.
c) 0.8 m/s towards the left.
d) 0
e) 0.8 m/s towards the right.
Answer:
correct answer is c
v = -0.8 m / s
Explanation:
This is a problem of quantity of movement, for this we must define a system formed by the two cars, so that the forces during the collision are internal and therefore the quantity of movement is conserved
initial
p₀ = m₁ v₁ - m₂ v₂
final
= (m₁ + m₂) v
We have taken the direction to the right as positive
p₀ =p_{f}
m₁ v₁ - m₂ v₂ = (m₁ + m₂) v
v = (m₁ v₁ - m₂ v₂) / (m₁ + m₂)
we calculate
v = (2 4 - 8 2) / (2 + 8)
v = (8 -16) / 10
v = -0.8 m / s
the negative sign indicates that the set is moving to the left
correct answer is c
A student throws a set of keys vertically upward to his fraternity brother, who is in a window 3.60 m above. The brother's outstretched hand catches the keys 1.60 s later. (Take upward as the positive direction. Indicate the direction with the sign of your answer.)With what initial velocity were the keys thrown?
Answer:
[tex]v_{i}=10.10 m/s[/tex]
Explanation:
The equation of the position is:
[tex]y=y_{i}+v_{i}t-0.5gt^{2}[/tex]
Where:
v(i) is the initial velocity
The initial position y(i) will be zero and the final position y = 3.60 m.
So, we just need to solve this equation for v(i).
[tex]v_{i}=\frac{y+0.5gt^{2}}{t}[/tex]
[tex]v_{i}=\frac{3.6+0.5*9.81*1.6^{2}}{1.6}[/tex]
[tex]v_{i}=10.10 m/s[/tex]
Therefore, the initial velocity is 10.10 m/s upwards.
I hope it helps you!
Two plates with area 7.00×10−3 m27.00×10−3 m2 are separated by a distance of 4.80×10−4 m4.80×10−4 m . If a charge of 5.40×10−8 C5.40×10−8 C is moved from one plate to the other, calculate the potential difference (voltage) between the two plates. Assume that the separation distance is small in comparison to the diameter of the plates.
Answer:
The voltage is [tex]V = 418.60 \ Volts[/tex]
Explanation:
From the question we are told that
The area of the both plate is [tex]A = 7.00 *10^{-3} \ m^2[/tex]
The distance between the plate is [tex]d = 4.80*10^{-4}\ m[/tex]
The magnitude of the charge is [tex]q = 5.40 *10^{-8} \ C[/tex]
The capacitance of the capacitor that consist of the two plates is mathematically represented as
[tex]C = \frac{\epsilon _o A}{d}[/tex]
Where [tex]\epsilon_o[/tex] is the permitivity of free space with a value [tex]e = 8.85*10^{-12} \ m^{-3} \cdot kg^{-1}\cdot s^4 \cdot A^2[/tex]
So
[tex]C = \frac{8.85*10^{-12} * (7* 10^{-3})}{ 4.8*10^{-4}}[/tex]
[tex]C = 1.29 *10^{-10} \ F[/tex]
The potential difference between the plate is mathematically represented as
[tex]V = \frac{ Q}{C }[/tex]
[tex]V = \frac{ 5.4*10^{-8}}{1.29 *10^{-10}}[/tex]
[tex]V = 418.60 \ Volts[/tex]
state Ohm`s law as applied in electricity
Answer:
Ohm's Law (E = IR) is as fundamentally important as Einstein's Relativity equation (E = mc²) is to physicists. When spelled out, it means voltage = current x resistance, or volts = amps x ohms, or V = A x Ω.
A single loop of wire with an area of 0.0820 m2 is in a uniform magnetic field that has an initial value of 3.80 T, is perpendicular to the plane of the loop, and is decreasing at a constant rate of 0.220 T/s .
Required:
a. What emf is induced in this loop?
b. If the loop has a resistance of 0.600Ω, find the current induced in the loop.
Answer:
a) emf = 0.01804 V
b) I = 0.03 A
Explanation:
a) The emf is calculated by using the following formula:
[tex]|emf|=|\frac{d\Phi_B}{dt}|=|\frac{d(A\cdot B)}{dt}|[/tex] [tex]=A|\frac{dB}{dt}|[/tex]
A: area of the loop = 0.0820m^2
B: magnitude of the magnetic field
dB/dt: change of the magnetic field, in time: 0.220 T/s
Where ФB is the magnetic flux, the surface vector and magnetic vector are perpendicular between them, and the area A is constant.
You replace the values of A and dB/dt in the equation (1):
[tex]|emf|=(0.082m^2)(0.220T/s)=0.01804V[/tex]
b) The current in the loop is:
[tex]I=\frac{emf}{R}[/tex]
R: resistance of the loop = 0.600Ω
[tex]I=\frac{0.01804V}{0.600\Omega}=0.03A=30mA[/tex]
a. The emf induced in this loop is 18.04mV.
b. The current induced in the loop is 30.06mA.
a. We know that,
[tex]flux(\phi)=B*A[/tex]
Where B is magnetic field and A is the area.
[tex]emf=\frac{d\phi}{dt}=A*\frac{dB}{dt}[/tex]
Given that, Area , [tex]A=0.0820m^{2},B=3.80T,\frac{dB}{dt}=0.220T/s[/tex]
Substituting all values in above equation.
[tex]emf=0.0820*0.220=0.01804V=18.04mV[/tex]
b. Resistance, [tex]R=0.600ohm[/tex]
Current induced in the loop is,
[tex]I=\frac{emf}{R}=18.04/0.6=30.06mA[/tex]
Hence, the emf induced in this loop is 18.04mV.
The current induced in the loop is 30.06mA.
Learn more:
https://brainly.com/question/15477464
an object's resistance to any change in motion is the_________ of the object.
An object's resistance to any change in motion is the Inertia of the object.
A 1000-kg car is driving toward the north along a straight horizontal road at a speed of 20.0 m/s. The driver applies the brakes and the car comes to a rest uniformly in a distance of 240 m. What are the magnitude and direction of the net force applied to the car to bring it to rest?
Answer:
The value of F= - 830 N
Since the force is negative, it implies direction of the force applied was due south.
Explanation:
Given data:
Mass = 1000-kg
Distance, d = 240 m
Initial velocity, v1 = 20.0 m/s
Final velocity, v2 = 0 (since the car came to rest after brake was applied)
v2²= v1² + 2ad (using one of the equation of motion)
0= 20² + (2 x a x 240)
0= 400 + 480 a
a = - 400/480
a = - 0.83 m/s²
Then, imputing the value of a into
F = ma
F = 1000 kg x ( - 0.83 m/s²)
F= - 830 N
The car was driving toward the north, and since the force is negative, it implies direction of the force applied was due south.
Which formation is one feature of karst topography?
Sinkholes formation is one feature of karst topography. The top of a cave falls if it develops large enough and its top extends near enough to the surface.
What is karst topography?Karst topography is a type of natural environment formed mostly by chemical weathering by water, resulting in caves, sinkholes, cliffs, and steep-sided hills known as towers.
The top of a cave falls if it develops large enough and its top extends near enough to the surface. Sinkholes are formed as a result of this, and they are one of the most distinguishing aspects of karst terrain.
When water absorbs carbon dioxide from the atmosphere and ground, it becomes carbonic acid.
Hence, sinkholes formation is one feature of karst topography
To learn more about the karst topography, refer to the link;
https://brainly.com/question/1167881
#SPJ2
Answer: A) Caves
Explanation:
A merry-go-round on a playground consists of a horizontal solid disk with a weight of 810 N and a radius of 1.56 m. A child applies a force 49.0 N tangentially to the edge of the disk to start it from rest. What is the kinetic energy of the merry-go-round disk (in J) after 2.95 s
Answer:
Kinetic Energy of the disk = 252 J
Explanation:
weight of disk = 810 N
radius = 1.56 m
applied force = 49 N
time = 2.95 s
kinetic energy of disk = ?
first, we find the mass of the disk
mass of disk = weight/acceleration due to gravity(9.81 m/s^2) = 810/9.81 m/s^2
mass of disk = 82.57 kg
torque on the disk = force x radius = 49 x 1.56 = 76.44 N-m
moment of inertia I = m[tex]r^{2}[/tex] = 82.57 x [tex]1.56^{2}[/tex] = 200.9 kg-[tex]m^{2}[/tex]
recall that
Torque T = Iα
where α = angular acceleration
76.44 = 200.9α
α = 76.44/200.9 = 0.38 m/s^2
from the equation of angular motion,
ω = ω' + αt
where ω = final angular speed
ω' = initial angular speed = 0 rad/s since disk starts from rest
t = time = 2.95 s
imputing values into the equation, we have
ω = 0 + (0.38 x 2.95)
ω = 1.12 rad/s
kinetic energy of the disk = I[tex]w^{2}[/tex]
KE = 200.9 x [tex]1.12^{2}[/tex]
Kinetic Energy of the disk = 252 J
Aparticlewhosemassis2.0kgmovesinthexyplanewithaconstantspeedof3.0m/s along the direction r = i + j . What is its angular momentum (in kg · m2/s) relative to the point (0, 5.0) meters?
Answer:
[tex]\vec{L}=-30\frac{kgm^2}{s}\hat{k}[/tex]
Explanation:
In order to calculate the angular momentum of the particle you use the following formula:
[tex]\vec{L}=\vec{r}\ X\ \vec{p}[/tex] (1)
r is the position vector respect to the point (0 , 5.0), that is:
r = 0m i + 5.0m j (2)
p is the linear momentum vector and it is given by:
[tex]\vec{p}=m\vec{v}=(2.0kg)(3.0m/s)(\hat{i+\hat{j}})=6\frac{kgm}{s}(\hat{i}+\hat{j})[/tex] (3)
the direction of p comes from the fat that the particle is moving along the i + j direction.
Then, you use the results of (2) and (3) in the equation (1) and solve for L:
[tex]\vec{L}=-30\frac{kgm^2}{s}\hat{k}[/tex]
The angular momentum is -30 kgm^2/s ^k
A student writes down several steps of scientific method. Put the steps in the best order
Answer:
Make a hypothesis, conduct an experiment, Analyze the experimental data..
An unstrained horizontal spring has a length of 0.36 m and a spring constant of 320 N/m. Two small charged objects are attached to this spring, one at each end. The charges on the objects have equal magnitudes. Because of these charges, the spring stretches by 0.033 m relative to its unstrained length. Determine (a) the possible algebraic signs and (b) the magnitude of the charges.
Answer:
1.been both -ve charged or both +be charged particles
2. 3.52mC
Explanation:
For the charge particle to cause an extension or movement of the string from its unrestrained position they would have been both -ve charged or both +be charged particles that's because like charges repel.
Now the Force sustain by the extended string is
F = Ke;
Where K is the force constant of the string, 320 N/m
e is the extension,0.033 m
F = 320 × 0.033 =10.56N
2.But according to columns law of charge;
F = kQ1 Q2
But Q1=Q2{ since the charge are of the same magnitude}.
Hence F = KQ^2
Where K is columns constant =9×10^9F/m
Hence Q=√F/K
Q= √10.56/9×10^9
=3.52×10^-3C
= 3.52mC
Convert from scientific notation to standard form
9.512 x 10-8
why is India called peninsula?
Answer:
India is a peninsula.
Explanation:
India is called as Indian Peninsula because it is surrounded by the Indian ocean on the south, the Arabian sea on the west and the Bay of Bengal on the east.
Consider two copper wires of equal cross-sectional area. One wire has 3 times the length of the other. How do the resistivities of these two wires compare?
Explanation:
The relation between resistance and resistivity is given by :
[tex]R=\rho \dfrac{l}{A}[/tex]
[tex]\rho[/tex] is resistivity of material
l is length of wire
A is area of cross section of wire
Resistivity of a material is the hidden property. If one wire has 3 times the length of the other, then it doesn't affect its resistivity. Hence, the resistivity of two wires is
Engineers and science fiction writers have proposed designing space stations in the shape of a rotating wheel or ring, which would allow astronauts to experience a sort of artificial gravity when walking along the inner wall of the station's outer rim. (a) Imagine one such station with a diameter of 104 m, where the apparent gravity is 2.20 m/s2 at the outer rim. How fast is the station rotating in revolutions per minute
Answer:
f = 1.96 revolutions per minute
Explanation:
The formula for the the frequency of revolution of a satellite, to develop an artificial gravity, with the help of centripetal acceleration is given as follows:
f = (1/2π)√(ac/r)
where,
f = frequency of rotation = ?
ac = centripetal acceleration= apparent gravity or artificial gravity = 2.2 m/s²
r = radius of station or satellite = diameter/2 = 104 m/2 = 52 m
Therefore,
f = (1/2π)√[(2.2 m/s²)/(52 m)]
f = (0.032 rev/s)(60 s/min)
f = 1.96 revolutions per minute
