An automobile of mass 1500kg moving at 25.0m/s collides with a truck of mass 4500kg at rest. The bumpers of the two vehicles lock together during the crash. Compare the force exerted by the car on the truck with that exerted by the truck on the car during the collision.

The rated secondary load current of a transformer can be calculated using the formula:

I = VA/V

where I is the current, VA is the apparent power rating of the transformer, and V is the voltage of the secondary winding.

In this case, the transformer is a step-down transformer, which means the secondary voltage is lower than the primary voltage. The secondary voltage is rated at 120 VAC, so we can use this value for V.

The apparent power rating of the transformer is given as 600 VA, so we can use this value for VA.

Substituting the values into the formula, we get:

I = 600 VA / 120 V

I = 5 amperes

Therefore, the rated secondary load current of the transformer is 5 amperes, so the correct answer is option (C).

To know more about secondary load current here

https://brainly.com/question/14291369

#SPJ11

Multiple pulleys in combination can increase the mechanical advantage of the system.

False.

A pulley is a simple machine that changes the direction of the force applied to it. A single pulley can only change the direction of the force required to lift an object, and it does not increase the mechanical advantage of the system.

Mechanical advantage refers to the ratio of the output force to the input force in a system. It is a measure of the amount by which a machine can multiply the force applied to it. In a simple pulley system, the mechanical advantage is equal to 1 because the output force is the same as the input force.

However, the mechanical advantage can be increased by using multiple pulleys in combination, such as in a block and tackle system. In a block and tackle system, several pulleys are arranged in such a way that the rope or cable passes through them multiple times. This arrangement multiplies the mechanical advantage of the system, making it easier to lift heavy objects.

So, in summary, a single pulley does not increase the mechanical advantage when lifting a weight. It only changes the direction of the force applied to the system. Multiple pulleys in combination can increase the mechanical advantage of the system.

To learn more about mechanical visit:

https://brainly.com/question/20885658

#SPJ11

While standing in a low tunnel, you raise your arms and push against the ceiling with a force of 100 N and mass is 70 kg.

Hence, the correct option is C.

When you push against the ceiling with a force of 100 N, the ceiling exerts an equal and opposite force on you (Newton's third law). This means that the ceiling exerts a force of 100 N on you downwards.

The force that the ceiling exerts on you is also known as the normal force (N) because it is perpendicular to the surface (ceiling) on which you are applying the force.

To calculate the force that the floor exerts on you, we need to consider the forces acting on you in the vertical direction. There are two forces your weight (due to gravity) and the normal force from the floor. When these forces are in equilibrium, you are not accelerating in the vertical direction, i.e. you are at rest.

The weight of you is given by

W = mg

Where W is the weight, m is the mass, and g is the acceleration due to gravity (9.8 m/[tex]s^{2}[/tex]).

W = (70 kg)(9.8 m/[tex]s^{2}[/tex]) = 686 N

W = 686 N

Since you are at rest, the forces in the vertical direction must balance each other out. Therefore, the normal force from the floor must be equal to your weight.

Normal force from floor = W = 686 N

Therefore, the force that the floor exerts on you is 686 N.

Hence, the correct option is C.

To know more about push here

https://brainly.com/question/4310929

#SPJ4

The new sound intensity level in decibels is β2 =[tex]10 log(I2) - 130.[/tex]

We can use the formula for sound intensity level in decibels:

β = [tex]10 log(I/I0)[/tex]

where β is the sound intensity level in decibels, I is the intensity of the sound in watts per square meter, and I0 is the reference intensity of

[tex]1.00 × 10^-12 W/m^2.[/tex]

We are given that a sound with intensity I1 = 10^-11 W/m^2 has a certain decibel level. We can use the formula above to find the sound intensit

level in decibels:

β1 =[tex]10 log(I1/I0) = 10 log(10^-11/10^-12) = 100 dB[/tex]

Now, we are given a new sound with intensity I2 = I12/I0. To find the new sound intensity level in decibels, we can substitute I2 into the formula:

β2 = [tex]10 log(I2/I0)[/tex]

Substituting I2 = I12/I0, we get:

β2 = 10 log(I12/I0^2)

Using the logarithmic property log(a/b) = log(a) - log(b), we can simplify this expression:

β2 = [tex]10(log(I12) - log(I0^2))[/tex]

β2 = [tex]10 log(I12) - 20[/tex]

Finally, we can substitute[tex]I1 = 10^-11 W/m^2[/tex] into the formula for I12:

[tex]I12 = I1 * I2 = (10^-11 W/m^2) * I2[/tex]

Substituting this expression for I12 into the equation for β2, we get:

β2 = [tex]10 log[(10^-11 W/m^2) * I2] - 20[/tex]

β2 =[tex]10 log(I2) - 130[/tex]

for such more questions on logarithmic properties

https://brainly.com/question/13929626

#SPJ11

Yes, you can drive your car in such a way that the distance it covers is (a) greater than, (b) equal to, but not  (c) less than the magnitude of its displacement.

(a) The distance covered is greater than the magnitude of its displacement when you take a non-linear path or have multiple changes in direction. In this case, the displacement is the straight-line distance between the starting and ending points, while the distance covered accounts for the entire path traveled.
(b) The distance covered is equal to the magnitude of its displacement when you drive in a straight line without changing direction. In this scenario, both the distance traveled and the straight-line distance between the starting and ending points are the same.
(c) The distance covered cannot be less than the magnitude of its displacement, as displacement is the shortest distance between two points. The distance traveled will always be equal to or greater than the displacement.

Learn more about displacement here:

https://brainly.com/question/30087445

#SPJ11

Answer:

The plane's speed is approximately 900 km/h or 559 mph.

Explanation:

Answer:

Δ M V (change in momentum) = F Δt

The change in momentum (hence the change in velocity) is proportional

to the time that is applied

True . The cutting maneuver, it involves both a decrease in momentum in the original direction of travel and an increase in momentum in the new direction of travel.

1. The cutting maneuver starts with an object (e.g., a vehicle, person, or any moving body) traveling in a certain direction with a given momentum.

2. To change the direction of travel, the object must reduce its momentum in the original direction. This can be achieved by applying a force against the original direction (e.g., braking or turning) to slow down.

3. Once the object's momentum in the original direction is decreased, it must then increase its momentum in the new direction of travel. This is accomplished by applying a force in the desired new direction (e.g., accelerating or pushing off in that direction).

4. As a result, the cutting maneuver successfully transitions the object from its initial direction to the new direction by reducing momentum in the original direction and increasing momentum in the new direction.

In summary, the cutting maneuver requires a decrease in momentum in the original direction of travel and an increase in momentum in the new direction of travel. This is achieved through the application of appropriate forces during the process.

To know more about momentum:

https://brainly.com/question/30487676

#SPJ11

Only the resistor connected in series which is resistor A will have the least current passing through it.

In this problem, we have some resistors that are connected in series and some in parallel.

The formula of resistors connected in series is given as;

R(series = R1 + R2 + R3 + ....+ Rn

The formula for resistors connected in parallel are

R(parallel) = 1/ R1 + 1/R2 + 1 / R3 +...+ 1/Rn

In this case, we have to assume that the voltage passing through the circuit is uniform and let's assume is 2V

V = IR

I = V/R

From the equation above, we can see that only the series resistance will have a small current passing through it.

Learn more on resistors here;

https://brainly.com/question/469388

#SPJ1

The electric force of the molecule on the proton is  N = kg m / [tex]s^2[/tex].

To calculate the electric force of a molecule on a proton, we need to know the charge of the molecule and the distance between the molecule and the proton.

If the molecule has a net charge of q, and the distance between the molecule and the proton is r, then the electric force between them is given by Coulomb's law:

F = kqq_proton / r^2

where k is the Coulomb constant (8.9875 x 10^9 N m^2/C^2), and q_proton is the charge of the proton (which is positive and has a magnitude of 1.6022 x 10^-19 C).

The units of the electric force depend on the units used for charge (C) and distance (m). If we express q in Coulombs, r in meters, and F in Newtons, then the units of the electric force can be written as:

N = ([tex]N m^2/C^2[/tex]) * C * C / [tex]m^2[/tex]

which simplifies to:

N = kg m / [tex]s^2[/tex]

Therefore, the units of the electric force are Newtons (N).

To learn more about Newtons visit:

https://brainly.com/question/3273157

#SPJ11

When the sum of external forces and sum of the external torques on a body are both zero, we conclude that the body is in state of static equilibrium.

When the sum of external forces and the sum of external torques on body are both zero, we can say that the body is in state of static equilibrium.

In this state, the body is not accelerating, and velocity and angular velocity are constant (or zero). The sum of external forces on the body is equal to zero, which means that net force acting on body is zero. Similarly, sum of external torques on body is also equal to zero, which means that the net torque acting on body is zero.

To know more about torque, refer

https://brainly.com/question/17512177

#SPJ1

If the battery is disconnected and the separation between the plates is increased then the  charge increases and the voltage decreases. Option D

When a parallel-plate capacitor is charged by connection to a battery, it stores electrical energy in the form of separated charges on its plates. If the battery is disconnected and the separation between the plates is increased, the charge on the capacitor remains the same, but the voltage across it decreases.
This is because the capacitance of the capacitor is determined by its geometry, which includes the distance between its plates. When the distance between the plates is increased, the capacitance decreases, and as a result, the voltage across the capacitor also decreases. This is because the charge stored on the plates is spread out over a larger area, reducing the electrical potential difference between them.
It is important to note that the charge on the capacitor remains the same because charges cannot be created or destroyed. They can only be moved around or redistributed. In this case, the charges on the capacitor are simply redistributed over a larger area.
Therefore, the correct answer to the question is option D: the charge increases and the voltage decreases. It is important to understand the relationship between capacitance, charge, and voltage in order to accurately predict the behavior of capacitors in different situations.

For more such questions on voltage visit:

https://brainly.com/question/1176850

#SPJ11

Large telescopes are usually reflecting rather than refracting for several reasons.

Firstly, a lens must have two precision surfaces, while a mirror needs only one, making mirrors easier and cheaper to manufacture for larger sizes. Secondly, lenses absorb light, while mirrors do not, leading to a loss of brightness and contrast in refracting telescopes. Additionally, lenses are subject to chromatic aberration, where different colors of light are focused at slightly different points, causing blurring and distortion. Finally, heavy lenses, which can only be supported at their edges, tend to deform under their own weight, whereas mirrors can be supported from behind, allowing for larger sizes and sharper images.

To know more about Refracting telescopes, please click on:

https://brainly.com/question/556195

#SPJ11

The reflection coefficient is approximately 0.025, which means that 2.5% of the incident wave intensity is reflected.

The amount of energy that is reflected depends on the difference in acoustic impedance between the two materials. Acoustic impedance is the product of the density and the speed of sound in the material.

[tex]R = [(Z2 - Z1)/(Z2 + Z1)]^2[/tex]

Substituting the values into the formula for the reflection coefficient, we get:

[tex]R = [(Z2 - Z1)/(Z2 + Z1)]^2[/tex]

[tex]R = [(1.1Z1 - Z1)/(1.1Z1 + Z1)]^2[/tex]

[tex]R = [(0.1Z1)/(2.1Z1)]^2[/tex]

[tex]R = 0.025[/tex]

for such more questions on reflection coefficient

https://brainly.com/question/31498600

#SPJ11

The work done on the system during an adiabatic free expansion is equal to the change in internal energy of the system.

Due to the adiabatic nature of the process, the change in the system's internal energy is equal to the change in the system's total energy, which is equal to the opposite of the change in potential energy.

As a result, the work accomplished is equal to the system's potential energy at the final volume less its potential energy at the initial volume. Since the system is perfect, PV, where P is the pressure and V is the volume, gives the system's potential energy.

Since P1 and P2 are the pressures before and after the expansion, respectively, the work done on the system is equal to −(20L×P2 - 10L×P1).

To learn more about potential energy visit:

https://brainly.com/question/1455245

#SPJ4

If a hockey puck of mass 0.1 kg is moving at a constant velocity of 5 m/s on frictionless ice, then the net force acting on the puck must be zero, according to Newton's first law of motion.

According to Newton's first law of motion, an object will remain at rest or move at a constant velocity in a straight line unless acted upon by a net external force. In the case of the hockey puck on frictionless ice, there is no frictional force acting on the puck to slow it down or change its direction. Therefore, the only force acting on the puck is the force that was initially used to set it in motion.

When the puck was initially set in motion, a force was applied to it to overcome its inertia and set it in motion. Once the puck is in motion on frictionless ice, there are no forces acting on it to slow it down or change its direction, so it will continue to move at a constant velocity in a straight line.

Since the net force acting on the puck is zero, the force required to keep the puck moving at a constant velocity of 5 m/s on frictionless ice is also zero. This is because a force is only required to change the velocity of an object, and in this case, the puck is already moving at a constant velocity, so no force is needed to maintain its motion.

In summary, the force required to keep a hockey puck moving at a constant velocity of 5 m/s on frictionless ice is zero, according to Newton's first law of motion. The initial force used to set the puck in motion is only required to overcome its initial inertia, and once the puck is in motion, no additional force is needed to maintain its motion at a constant velocity.

To learn more about frictionless  visit: https://brainly.com/question/26515803

#SPJ11

The correct option is (2) 0.81 kN (since 0.81 kN is the closest option to 0.35 kN).

To solve this problem, we can use Newton's second law of motion, which states that the net force acting on an object is equal to its mass times its acceleration: F_net = m*a.

In this case, the person has a weight of 0.70 kN, which means that the force of gravity acting on them is 0.70 kN. The elevator is accelerating upward with an acceleration of 1.5 m/s^2. Therefore, the net force acting on the person can be found as follows:

F_net = ma = (0.70 kN)(1.5 m/s^2) = 1.05 kN

The magnitude of the force of the elevator floor on the person is equal in magnitude but opposite in direction to the net force acting on the person, which is 1.05 kN. Therefore, the answer is:

Magnitude of force = 1.05 kN - 0.70 kN = 0.35 kN

Therefore, the correct option is (2) 0.81 kN (since 0.81 kN is the closest option to 0.35 kN).

To learn more about magnitude visit:

https://brainly.com/question/15681399

#SPJ11

The woman supplied an average power of 625 W while climbing the stairway.

To find the average power the woman supplied, we need to use the formula:

average power = work done / time

The work done is equal to the change in potential energy of the woman as she climbs the stairs. The change in potential energy is given by:

ΔPE = mgh

where m is the mass of the woman, g is the acceleration due to gravity, and h is the height of the stairway.

So, ΔPE = (62.0 kg) x (9.81 m/s^2) x (4.28 m) = 2627 J

The time taken by the woman is 4.20 s.

Therefore, the average power she supplied is:

average power = work done / time = 2627 J / 4.20 s ≈ 625 W

Therefore, the woman supplied an average power of 625 W while climbing the stairway.

Learn more about average power

brainly.com/question/30888338

#SPJ11

True . If you increase the time over which a force is applied, you can decrease the magnitude of the force and still achieve the same change in momentum.

This concept is related to the Impulse-Momentum Theorem, which states that the impulse (force multiplied by time) is equal to the change in momentum.

To break it down step-by-step:
1. Impulse (I) is calculated as Force (F) multiplied by Time (t): I = F * t
2. Change in momentum (Δp) is equal to the impulse: Δp = I
3. When you increase the time (t) while maintaining the same change in momentum (Δp), you can decrease the force (F) since their product remains constant.

So, by increasing the time over which a force is applied, you can decrease the magnitude of the force while still achieving the same change in momentum.

To know more about Impulse-Momentum Theorem:

https://brainly.com/question/14121529

#SPJ11

The hydrogen atom is currently in the third excited state, which means its electron is in the energy level n = 4.

To emit light with the longest possible wavelength, the electron must jump down to a lower energy level. The longest possible wavelength corresponds to the smallest energy difference between the initial and final states. Therefore, the electron should jump to the n = 3 state, emitting light with a wavelength in the red part of the spectrum.
To emit light with the shortest possible wavelength, the electron should jump to the n = 1 state, which corresponds to the largest energy difference. This would emit light with the shortest possible wavelength in the ultraviolet part of the spectrum.
To absorb light with the longest possible wavelength, the electron should jump to the n = 5 state, which corresponds to the largest energy difference between the initial and final states. This would absorb light with a wavelength in the ultraviolet part of the spectrum.
Therefore, the answers are:
(a) n = 3
(b) n = 1
(c) n = 5

For a hydrogen atom in the third excited state, the following transitions occur for each scenario:
(a) To emit light with the longest possible wavelength, the hydrogen atom should jump from n = 4 to n = 3. The wavelength is longer when the energy difference between levels is smaller, which happens when the jump is to the nearest lower energy level.
(b) To emit light with the shortest possible wavelength, the hydrogen atom should jump from n = 4 to n = 1. The wavelength is shorter when the energy difference between levels is larger, which happens when the jump is to the lowest energy level.
(c) To absorb light with the longest possible wavelength, the hydrogen atom should jump from n = 4 to n = 5. The wavelength is longer when the energy difference between levels is smaller, which happens when the jump is to the nearest higher energy level.
Your answer: 5. (a) n = 1 (b) n = 3 (c) n = 5

Visit here to learn more about hydrogen atom:

brainly.com/question/29695801

#SPJ11

The maximum power this network can dissipate will be 3P/2. The right answer is D.

When two identical resistors are connected in series, their total resistance is 2R.

When a third identical resistor is connected in parallel with these two, the total resistance of the circuit becomes R/3. Using the formula for power,

[tex]P = V^2/R[/tex],

we can calculate the maximum power that each resistor can dissipate as

[tex]P = V^2/R.[/tex]

When two resistors are connected in series, the voltage across them is divided equally.

Therefore, the voltage across each resistor in the series combination is V/2.

When a third resistor is connected in parallel with these two, the voltage across each of the series resistors remains the same (V/2), but the voltage across the parallel resistor is also V/2.

The total power dissipated in the series resistors is

[tex]P1 = (V/2)^2 \times R = V^2/4R.[/tex]

The total power dissipated in the parallel resistor is

[tex]P2 = (V/2)^2 \times (R/3) = V^2/12R.[/tex]

The total power dissipated in the network is the sum of P1 and P2, which is [tex]5V^2/12R[/tex] or 3P/2.

Therefore, the maximum power that this network can dissipate is 3P/2. The right option is D.

For more such answers on Resistance

https://brainly.com/question/17563681

#SPJ11

The intensity level of a sound increases by  approximately 4.77 decibels when you triple the intensity of a source of sound.

To determine the increase in decibels when you triple the intensity of a sound source, you can use the formula for calculating sound intensity levels, which is:

L2 = 10 * log10(I2 / I1)

In this equation, L2 is the increase in decibels, I2 is the final intensity, and I1 is the initial intensity. Since you want to triple the intensity, I2 will be 3 * I1. Plugging this into the formula, you get:

L2 = 10 * log10(3 * I1 / I1)

Simplifying the equation, you can cancel out I1 from both the numerator and denominator:

L2 = 10 * log10(3)

Now, calculate the value using the logarithm:

L2 ≈ 10 * 0.477

L2 ≈ 4.77 decibels

So when you triple the intensity of a source of sound, the intensity level increases by approximately 4.77 decibels.

For more such questions on sound, click on:

https://brainly.com/question/9349349

#SPJ11

The force exerted by the 5.0-kg mass on the rope when the elevator has an acceleration of 4.0 m/s² upward is 20 N downward. So, the correct answer is option 4.

Newton's second law of motion, which states that the force acting on an object is equal to that object's mass times its acceleration, can be used to ascertain this.

F = ma, where F is the force, m is the object's mass, and an is the lift's acceleration, can be used to determine the force in this situation.

F = (5.0 kg)(4.0 m/s²) = 20 N in this situation.

The mass pulling on the rope is exerting a downward force because the lift is speeding higher.

Therefore, when the lift accelerates at a rate of 4.0 m/s² upward, the force applied to the rope by the 5.0-kg mass is 20 N downward.

To learn more about force visit:

https://brainly.com/question/12785175

#SPJ4

The minimum angle from which a pendulum can be dropped so that it just makes it around the peg without the string going slack can be calculated using the conservation of energy principle.

Let's assume that the length of the pendulum is L and the radius of the peg is r.

The potential energy of the pendulum at its maximum height (when it is just about to be released) is equal to its kinetic energy at its lowest point (when it just makes it around the peg without the string going slack).

Therefore, we can equate these two energies as follows:

mgh = (1/2)mv²

where m is the mass of the pendulum, g is the acceleration due to gravity, h is the height from which the pendulum is dropped, and v is the velocity of the pendulum at its lowest point.

Since the velocity of the pendulum at its lowest point is zero, we can simplify the above equation to:

h = (1/2)(v²/g)

Now, we can use the conservation of energy principle to determine the velocity of the pendulum at its lowest point. The total energy of the pendulum is constant and is equal to the sum of its potential energy (mgh) and its kinetic energy

(1/2)mv².

Therefore, we can write:

mgh = (1/2)mv²

Simplifying this equation, we get:

v² = 2gh

Substituting this value of v² into the equation for h, we get:

h = (1/2)(2gh/g)

h = h

This means that the height from which the pendulum is dropped does not depend on its mass. Therefore, the minimum angle from which the pendulum can be dropped so that it just makes it around the peg without the string going slack is given by:

θ = sin⁻¹(r/L)

where θ is the minimum angle in radians, r is the radius of the peg, and L is the length of the pendulum. To convert the angle from radians to degrees, we can use the formula:

θ(degrees) = (θ(radians) / 180)/π

where π is the mathematical constant pi.

For more such answers on the pendulum

https://brainly.com/question/26524032

#SPJ11

The length of a simple pendulum with a period on Earth of 6.0 seconds is nearly 8.95 meters.

A simple pendulum can be described as a device where its point mass is attached to a light inextensible string and suspended from a fixed support. The vertical line passing through the fixed support is the mean position of a simple pendulum.

To calculate the length, we can use the formula for the period of a simple pendulum:

T = 2π√(L/g), where T is the period, L is the length, and g is the acceleration due to gravity (approximately 9.81 m/s² on Earth).

First, we'll rearrange the formula to solve for L:
L = (T² * g) / (4π²)

Now, plug in the given period (T = 6.0 seconds) and the value of g (9.81 m/s²):
L = (6.0² * 9.81) / (4 * π²)

Calculate the result:
L ≈ 8.95 meters

Learn more about simple pendulum:

https://brainly.com/question/26449711

#SPJ11

A hot low density gas such as any the colorful nebulae imaged by the hubble space telescope emits a spectrum known as emission lines.

Density is a physical property of matter that measures its mass per unit of volume. It is expressed in terms of kilograms per cubic meter (kg/m3) and is an important factor in determining an object's ability to float or sink in a liquid or a gas. Density is also used to calculate the specific gravity of a substance, which compares the densities of two different substances.

These lines are created when electrons in the gas are excited by photons and then transition to a lower energy state. The emission lines correspond to specific wavelengths of light and can be used to identify elements, as each element has a unique set of emission lines. This can be used to identify the elements present in the gas and gives an indication of its temperature and density.

The temperature of a hot low-density gas is usually lower than that of the surrounding environment. This is because the gas has fewer collisions with other particles and hence, the energy transfer from these collisions is lower. As the temperature of the gas decreases, its density also decreases. This is because the gas molecules have less kinetic energy, so they are less likely to collide with each other and form a denser structure.

The density of a hot low-density gas is usually lower than that of the surrounding environment. This is because the gas has fewer collisions with other particles and hence, the energy transfer from these collisions is lower. As the density of the gas decreases, its temperature also decreases. This is because the gas molecules have less kinetic energy, so they are less likely to collide with each other and form a denser structure.

To know more about density click-
https://brainly.com/question/1354972
#SPJ1

In the celestial sphere model, the Sun's position along the western horizon at sunset changes due to the Earth's rotation on its axis.

The celestial sphere is an imaginary sphere with the observer at its center. It is used to map the positions of celestial objects such as stars, planets, and the Sun.

for such more questions on Earth's rotation

https://brainly.com/question/28308953

#SPJ11

The initial mass of 235U required to operate a 950-MW reactor for 1 year with 24% efficiency is about 146.72 kg.

To calculate the initial mass of 235U required to operate a 950-MW reactor for 1 year, we need to use the following formula:

mass of 235U = (energy output x time x efficiency) / (energy per fission x number of fissions per atom x mass per atom)

First, we need to calculate the energy output of the reactor for 1 year. To do this, we can use the following formula:

energy output = power x time

where power is the power output of the reactor (950 MW) and time is the operating time of the reactor in seconds. Since there are 365 days in a year and 24 hours in a day, the operating time of the reactor in seconds is:

operating time = 365 days x 24 hours/day x 3600 seconds/hour = 31,536,000 seconds

Therefore, the energy output of the reactor for 1 year is:

energy output = 950 MW x 31,536,000 s = 2.9988 x 10^16 J

Next, we need to calculate the energy per fission of 235U. The average energy released per fission of 235U is about 200 MeV or 3.204 x 10^-11 J.

The number of fissions per atom of 235U is around 2.5, which means that each fission of 235U releases 2.5 x 3.204 x 10^-11 J of energy.

The mass per atom of 235U is about 235 g/mol, which is equivalent to 3.90 x 10^-22 kg/atom.

Plugging these values into the formula, we get:

mass of 235U = (energy output x time x efficiency) / (energy per fission x number of fissions per atom x mass per atom)

mass of 235U = (2.9988 x 10^16 J x 1 year x 0.24) / (2.5 x 3.204 x 10^-11 J x 3.90 x 10^-22 kg/atom)

mass of 235U = 146.72 kg

Therefore, the initial mass of 235U required to operate a 950-MW reactor for 1 year with 24% efficiency is about 146.72 kg.

Learn more about reactor

brainly.com/question/22061527

#SPJ11

1. For an inelastic collision involving two colliding objects, the following statements are true: 1. Kinetic energy is lost. 2. Momentum is constant.

2. The total momentum of the system remains constant before

and after the collision, as dictated by the conservation of momentum.

1. The following claims are true for an inelastic collision between two objects:

Kinetic energy is lost

Momentum is conserved

Kinetic energy is not gained

Momentum is not lost

Kinetic energy is not constant

Momentum is not gained

Therefore, the correct statements are:

Kinetic energy is lost.

Momentum is conserved.

2. In an inelastic collision, the objects stick together after the collision,

and some of the initial kinetic energy is converted into other forms of

energy, such as heat or deformation.

However, The conservation of momentum requires that the total

momentum of the system be unchanged before and after the collision.

for such more question on inelastic collision

https://brainly.com/question/30055517

#SPJ11

The force of friction acts in the direction opposite to the direction of motion, so it acts up the inclined plane in this case. We can use the following equations of motion to solve for the force of friction:

v^2 = u^2 + 2as

where v is the final velocity, u is the initial velocity (which is zero in this case), a is the acceleration, s is the distance traveled, and we can use the following equation to relate the force of friction to the normal force:

f_friction = μ_k N

where μ_k is the coefficient of kinetic friction and N is the normal force, which is the component of the weight of the block that is perpendicular to the inclined plane.

First, we need to find the distance traveled by the block down the incline. We can use trigonometry to determine the height of the incline:

h = sin(30°) x length of incline = 0.5 x length of incline

The length of the incline is not given in the problem, so we can leave it as a variable. The distance traveled down the incline is equal to the length of the incline multiplied by the sine of the angle of inclination:

s = length of incline x sin(30°) = 0.5 x length of incline

Now we can use the equation of motion to solve for the final velocity:

v^2 = u^2 + 2as

v^2 = 0 + 2 x 3.0 m/s^2 x 0.5 x length of incline

v^2 = 3.0 m^2/s^2 x length of incline

The final velocity is also given by:

v = √(2gh)

where g is the acceleration due to gravity and h is the height of the incline. Substituting the value of h we found earlier:

v = √(2gh) = √(2 x 9.8 m/s^2 x 0.5 x length of incline) = √(9.8 m^2/s^2 x length of incline)

Now we can equate the two expressions for v and solve for the length of the incline:

3.0 m^2/s^2 x length of incline = 9.8 m^2/s^2 x length of incline

length of incline = 3.27 m

Now we can use the length of the incline to find the normal force:

N = mg cos(30°) = 1.8 kg x 9.8 m/s^2 x cos(30°) = 15.26 N

Finally, we can use the coefficient of kinetic friction to find the force of friction:

f_friction = μ_k N = 0.23 x 15.26 N = 3.51 N

Therefore, the magnitude of the force of friction acting on the block is approximately 3.5 N, which is closest to option (3) 3.4 N.

To know more about friction visit link :

https://brainly.com/question/13000653

#SPJ11