Answer:
C
Explanation:
a, b and d are physical properties ..... the compound or element in question has not changed its identity
c when combined with oxygen, it has changed to a different compound via CHEMICAL property.
What does the NaBr + Cl₂ represent
in the reaction?
NaBr + Cl₂ →>>
NaCl + Br₂
Answer:
The reactants
Explanation:
The molecules on the left side of the reaction are the reactants. Reactants are the molecules which react with one another to form something new.
The molecules on the right side of the reaction are the products. Products are the molecules that form in response to the reaction.
10.5 mL of an unknown solution are diluted to 80.0 mL. The concentration of the
new solution was determined to be 0.172 M. What was the molarity of the
unknown solution? (Report your answer to two places past the decimal point.
Moodle is looking for a number only, no units.)
The molarity of the unknown solution will be 1.310 M.It is denoted by M₂.
What is molarity?Molarity is defined as the ratio of the moles to the volume of the solution.
Given data;
Volume of unknown solution,V₁ = 10.5 mL
The volume of diluted solution,V₂ = 80.0 mL
Molarity of new solution,M₁ = 0.172 M
Molarity of unknown solution, M₂=?
For dilution we use the formula as;
M₁V₁=M₂V₂
M₂=M₂V₂/V₁
M₂ = ( 80 × 0.172 ) / 10.5
M₂= 1.310 M
Hence the molarity of the unknown solution will be 1.310 M.
To learn more about molarity refer;
https://brainly.com/question/2817451
#SPJ1
A 609 ml sample of naoh has a ph of 13.5292. if 594 ml of distilled water was added to the initial naoh solution, what would the new ph of the solution be g
The new pH of the solution after the addition of water would be 13.22.
Total volume of the solutionV(total) = 609 ml + 594 ml
V(total) = 1203 ml
Concentration of waterC = (594 ml)/(1203 ml)
C = 0.493
pOH = -log(0.493)
pOH = 0.31
New pH of the solution = 13.5292 - 0.31 = 13.22
Learn more about pH here: https://brainly.com/question/13557815
#SPJ1
The difference in an area with high concentration and an area with low concentration is called.
The difference in an area with high concentration and an area with low concentration is called the concentration gradient.
What is Concentration Gradient ?
A concentration gradient occurs when the concentration of particles is higher in one area than another.
In passive transport, particles will diffuse down a concentration gradient, from areas of higher concentration to areas of lower concentration, until they are evenly spaced.
This difference in an area with high concentration and an area with low concentration is called the concentration gradient.
Learn more about diffusion here ;
https://brainly.com/question/24746577
#SPJ1
How many grams of NaCl can be created from 9.8 moles of HCl? (molar mass of NaCl= 58.44g, HCl=36.46g)
The mass of NaCl that can be produced from 9.8 moles of HCl is 572.712 g
Balanced equation2Na + 2HCl --> 2NaCl + H₂
From the balanced equation above,
2 moles of HCl reacted to produced 2 moles of NaCl.
Therefore,
9.8 moles of HCl will also react to produce 9.8 moles of NaCl
How to determine the mass of NaClMolar mass of NaCl = 58.44 g/molMole of NaCl = 9.8 molesMass of NaCl =?Mass = mole × molar mass
Mass of NaCl = 9.8 × 58.44
Mass of NaCl = 572.712 g
Learn more about stoichiometry:
https://brainly.com/question/14735801
#SPJ1
A graduated cylinder is filled to 12.5 mL
with water and a piece of tin is placed
in the cylinder, displacing the level to
16.8 mL.
What is the volume of the tin piece in
cubic centimeters?
[?] cm³
Record your answer to the tenths place.
Volume (cm³)
The volume of the tin piece in cubic centimetres is 4.3 cm³
What is a graduated cylinder?A graduated cylinder is a standard piece of laboratory glassware used to measure the volume of an object or amount of liquid. As its name indicates, it is a glass cylinder with marks along the side similar to those on a measuring cup.
When adding an object to a liquid, the displayed volume difference corresponds to the volume of the added object.
In this way, to find the value of the object's volume, subtract the initial volume from the final volume:
16.8ml - 12.5ml = 4.3ml
To convert to cubic centimetres, the conversion scale of volume and length measurements need to be used, finding that mL is equal to cubic centimetres. So, the final answer is:
4.3 cm³
Learn more about graduated cylinders:
https://brainly.com/question/26145096
#SPJ1
What is the empirical formula for the molecular formula given? Molecular formula: C5H12O
What is the empirical formula for the molecular formula given? Molecular formula: C5H12O
The empirical formula for the given molecular formula C₅H₁₂O. As the molecular formula cannot be reduced into simplest ratio, therefore, the empirical formula and the molecular formula are the same.
What is the empirical formula?The empirical formula can be described as the simplest ratio of the number of different atoms present in a compound. The molecular formula of the compound can be described as the actual number of each different atom in a molecule. This formula is generally used and is also a multiple of the empirical formula of a compound.
The empirical formula provides the ratio of the number of atoms of a chemical in a given compound. The percentage composition directly gives the empirical formula of the compound.
The molecular formula can be reduced into the empirical formula of the compound by dividing the subscripts with a number that can provide the smallest ratio of the elements in the compound.
For the given molecular formula, the further simplest or most reduced ratio cannot be possible. Therefore, the empirical formula of the compound will be the same as the molecular formula. Therefore empirical formula of the compound is C₅H₁₂O.
Learn more about the empirical formula, here:
brainly.com/question/14044066
#SPJ5
Which of the following observations would indicate that a material is a pure substance?
O It does not dissolve in water.
O It changes color after heating.
O It cannot be physically broken down into different types of atoms.
O It can be physically broken down into different types of molecules.
Answer:
C
Explanation:
Got it right on a test
what is the approximate partial pressure of oxygen at 1500 m?
The approximate partial pressure of oxygen at 1500 m is 0.18 atm.
Pressure of the airFrom barometric pressure table;
1500 m = 85 kPa
1 kPa = 0.0099 atm
85 kPa = ?
= 0.84 atm
Oxygen percentage in air = 21%
Partial pressure of oxygen in air
P = 0.21 x P(total)
P = 0.21 x 0.84 atm
P = 0.18 atm
Thus, the approximate partial pressure of oxygen at 1500 m is 0.18 atm.
Learn more about partial pressure here: https://brainly.com/question/19813237
#SPJ11
Based on the electron configuration of the two
atoms, predict the ratio of metal cationic (+) atom
to nonmetal anionic (-) atom in the compound.
Magnesium 1s²2s²2p63s²
Sulfur 1s²2s²2p63s²3p4
A compound formed between Magnesium and Sulfur is MgS.
What is a cation?Cations are positively-charged ions (atoms or groups of atoms that have more protons than electrons due to having lost one or more electrons).
Magnesium, Mg, is located in period 3, group 2 of the periodic table, and has two electrons on its outermost shell.
On the other hand, sulfur, S, is located in period 3, group 16 of the periodic table, and has six electrons on its outermost shell.
Chemical reactivity is governed by an atom's "desire" to have a stable electron configuration and to have eight electrons in its outermost shell to complete an octet.
In this case, magnesium can complete its octet by giving up those two valence electrons, becoming the magnesium cation.
[tex]Mg^{2+}[/tex], in the process.
Sulfur, which only needs two electrons to complete its octet, will pick up the two electrons coming from magnesium, becoming the sulfide anion,
[tex]S^{2−}[/tex], in the process.
The electrostatic force of attraction will then bring the magnesium cations and the sulfur anions together to form an ionic bond.
Learn more about cation here:
https://brainly.com/question/1333307
#SPJ1
What is the name of this compound
Hydrobrome Aicd
I think so...
Answer:
[tex]\fbox {1,2-di bromo pentane}[/tex]
Explanation:
⇒ Bromine atoms present on 1st and 2nd Carbon atoms
⇒ 5 carbon atoms
⇒ Only single bonds
Hence, the IUPAC name will be :
1,2-dibromopentane
PLS HELP ME ASAP ILL GIVE BRAINLIEST
Which statement best describes how a Geiger counter works?
Select one:
a. Water vapor condenses along a path traveled by ionizing radiation.
b. Particles ionized by radiation cause black streaks to appear on sensitive photographic paper.
c. Radioactive particles ionize argon gas in a tube and the resulting electric current is amplified and heard as a clicking sound.
d. A material sensitive to radioactive emissions glows when mixed with a radioactive substance.
Answer:
the answer is c
Explanation:
c. Radioactive particles ionize argon gas in a tube and the resulting electric current is amplified and heard as a clicking sound.
How many grams of aluminum
chloride, AlCl3, form when 0.25 mol
Al react?
2AI+ 3Cl₂ → 2AICI 3
[?] g AICI 3
From the equation, we know that for every 2 moles of aluminum consumed, 2 moles of aluminum chloride are produced.
This means that if 0.25 moles of Al react, then 0.25 moles of aluminum chloride are produced.
The atomic mass of Al is 26.9815385 g/mol.The atomic mass of Cl is 35.45 g/mol.So, the formula mass of aluminum chloride is:
26.9815385+3(35.45)=133.3315385 g/mol.Thus, 0.25 moles have a mass of:
(133.3315385)(0.25), which is about 33 g (to 2 sf)Perform the following operation
and express the answer in
scientific notation.
2.36×10-2 8.4×10²
[tex]\quad \huge \quad \quad \boxed{ \tt \:Answer }[/tex]
[tex]\qquad \tt \rightarrow \:2.8 × {10}^{-5}[/tex]
____________________________________
[tex] \large \tt Solution \: : [/tex]
[tex]\qquad \tt \rightarrow \: \dfrac{2.36 \times 10 {}^{ - 2} }{8.4 \times {10}^{2} } [/tex]
[tex]\qquad \tt \rightarrow \: \dfrac{2.36 }{8.4 } \times \cfrac{10 {}^{ - 2} }{10 {}^{2} } [/tex]
[tex]\qquad \tt \rightarrow \: 0.28 \times 10 {}^{ - 2 - 2} [/tex]
[tex]\qquad \tt \rightarrow \: 0.28 \times 10 {}^{ - 4} [/tex]
[tex]\qquad \tt \rightarrow \: 2.8 \times 10 {}^{ - 5} [/tex]
Answered by : ❝ AǫᴜᴀWɪᴢ ❞
14- Which statements about acids and bases are correct? (1 mark) 1- An acid reacts with a metal to give off hydrogen. 2- A base reacts with an ammonium salt to give off ammonia. 3-An acid reacts with a carbonate to give off carbon dioxide. 4- Alkaline solutions are orange in methyl orange.
A) 1, 2 and 3
B) 1, 2 and 4
C) 1, 3 and 4
D) 2, 3 and 4
Answer:
a)
Explanation:
4th is incorrect.
Alkaline solutions are yellow in methyl orange.
Which statements about acids and bases are correct ?
A) 1, 2 and 3<3
Nitrogen monoxide (NO) is a pollutant known to
destroy the ozone layer. Nitrogen monoxide reacts
with ozone molecules (0,) to release oxygen and
a nitrogen-containing compound Q. Given that one
molecule of nitrogen monoxide reacts with one
molecule of ozone to produce one molecule of
of Q.
oxygen and one molecule of Q, identify the formula.
Answer:
See below
Explanation:
NO + O3 ====> NO2 + O2 (ozone is O3)
When you have added as much solute as can dissolve in solvent the solution is called
Solubility limit. that's the answer
What is the source of energy in nuclear power plants?
Answer:
URANIUMExplanation:
What is the source of energy in nuclear power plants?
Uranium is the fuel most widely used by nuclear plants for nuclear fission. Uranium is considered a nonrenewable energy source, even though it is a common metal found in rocks worldwide. Nuclear power plants use a certain kind of uranium, referred to as U-235, for fuel because its atoms are easily split apart.
what is formed when mixing a weak acid and strong base
Explanation:
when a weak acid and a strong based are mixed they react the pH can be determined by consider ing the equilibrium
What kind of exercise does not require the use of oxygen to metabolize energy? strength aerobic stretching anaerobic
Answer:
See Below
Explanation:
'an aerobic ' means it does not use oxygen
Answer:
anaerobic
Explanation:
Question 3
Not yet
answered
Points out of
If you dissolve 2.70 g of NaCl in 425 mL of water, what is the molarity of the
solution? (Report your answer to three places past the decimal point. Moodle is
looking for a number only, no units.)
I added a screenshot because I recently answered the same question. I hope this helps you!! :)
When producing a soluble salt in a reaction between an acid and an alkali, how can you prepare dry solid crystals from the solutions
1)evaporation/crystallization
2)filtration
3)condensation
4)nuetralisation
Explanation:
Making a salt from an alkali
If you are using an alkali - which is a soluble base - then you need to add just enough acid to make a neutral solution (check a small sample with universal indicator paper).
Warm the salt solution to evaporate the water. You get larger crystals if you evaporate the water slowly.
Choose the correct statements when comparing 1 mole of carbon
monoxide and one mole of helium gas.
a: they weigh the same
b: they have the same amount of particles
c: they occupy the same volume
Answer: they have the same amount of particles
Explanation:
This statement is true by Avogadro's Law, which states that in a mole of any substance, there are [tex]6.022 \times 10^{23}[/tex] particles.
Dalton law states that the partial pressure of a gas in a mixture of gases is _____ to the total pressure of the mixture.
Answer:
Dalton law states that the partial pressure of a gas in a mixture of gases is equal to the total pressure of the mixture.
What is the common uses of bases
A sealable bag holds 3.79 L of
gas. How many moles of H₂
gas are needed to fill the bag
at 1.0 atm and 293 K?
The H₂ gas are needed 0.157moles to fill the bag .
For solving this problem we use the ideal gas equation. It is also called the general gas equation . This equation use for a hypothetical ideal gas. . It has several limitations. It was first stated by Benoit Paul Emile Clapeyron in 1834 . The ideal gas law is written by an empirical form:
PV = n R T
where-
P = Pressure
V = volume
T = Temperature
n = The amount of substance
R = Ideal gas constant
Now we have the values of these terms as-
P = 1 atm , V = 3.79L , T = 293K
and R = 0.0826 L/atm
For getting moles of hydrogen we can use the values of variables in ideal gas equation as -
P V = n R T
Now (1 atm) × ( 3.79L ) = n × ( 0.0826 L/atm) × ( 293K)
n = (1 × 3.79) ÷ (0.0826 x 293)
= 0.157 moles
So that the 0.157moles of H₂ gas are needed for fill the bag .
Learn more about the ideal gas here:
https://brainly.in/question/11882
#SPJ10
How to convert °c 40 to °f
Answer:
104 f
Explanation:
multiply 40 by 1.8 and then add 32
9- Which pair of formulae represents two alkanes? (1 mark)
A)CH4 and C8H18
B)C₂H6 and C5H8
C) C3H6 and C5H12
D) C₁0H8 and C4H8
Answer:
A) CH4 and C8H18
Explanation:
General Formula for an Alkane = CnH2n+2This means for every number of Carbon (C) atoms, there are twice as many Hydrogen (H) atoms with an additional two added onto that.Therefore, if there is one Carbon Atom, and we multiply that by two, and then add an additional two, we get 4 Hydrogen atoms, so CH4, which is our first FormulaeSecondly, if we have eight Carbon Atoms, and we multiple that by two (16), and then add an additional two, we get 18 Hydrogen atoms, so C8H18, which is our second FormulaeThe other Formulas do not follow this 'General Formula'6.0 mol NaOH reacts with
9.0 mol H3PO4 according to
the equation below:
3NaOH + H3PO4 → 3H₂O + Na3PO4
How many moles of Na3PO4 form from
6.0 mol NaOH?
[?] mol Na3PO4
Round your answer to the tenths place.
2 moles of Na3PO4 form from 6.0 mol NaOH. Details about stoichiometry can be found below.
How to calculate number of moles?The number of moles of a substance can be calculated stoichiometrically as follows:
3NaOH + H3PO4 → 3H₂O + Na3PO4
According to this equation,
3 moles of NaOH produces 1 mole of Na3PO4
This means that 6 moles of NaOH will produce 6/3 = 2 moles of Na3PO4
Therefore, 2 moles of Na3PO4 form from 6.0 mol NaOH.
Learn more about stoichiometry at: https://brainly.com/question/9743981
#SPJ1
When molten magma rises to the surface it cools ________, forming ________ igneous rocks.
A. slowly, extrusive
B. slowly, intrusive
C. rapidly, intrusive
D. rapidly, extrusive
Answer:
B)Slowly, intrusive
