Answer:To calculate the elastic potential energy stored in the spring, we can use the formula:
Elastic potential energy = (1/2) * k * Δx^2
where k is the force constant of the spring and Δx is the change in length from the relaxed length.
First, we need to calculate Δx:
Δx = 3.50 m - 2.58 m
Δx = 0.92 m
Now, we can calculate the elastic potential energy:
Elastic potential energy = (1/2) * k * Δx^2
Elastic potential energy = (1/2) * 5.2 N/m * (0.92 m)^2
Elastic potential energy = 2.17 J
Therefore, the elastic potential energy stored in the spring is 2.17 J.
Explanation:
A cart with a mass of 8. 0 kilograms is attached to a spring. When
released from the spring, the cart travels up a hill with a height of 11
meters. The cart comes to rest at the top of the hill. The spring is 100%
efficient. How much elastic potential energy was required to bring the
cart to rest at the top of the hill? Include your units.
Elastic Potential Energy required to bring the cart on the top of the hill= 862.4J
To solve this problem, we need to use the conservation of energy principle. The energy stored in the spring (elastic potential energy) is transformed into kinetic energy as the cart is released, and then into gravitational potential energy as the cart moves up the hill. At the top of the hill, all of the kinetic energy is converted back into potential energy, and the cart comes to rest. Since the spring is 100% efficient, no energy is lost due to friction or other factors.
The equation for elastic potential energy is:
Elastic potential energy = 1/2 * k * x^2
where k is the spring constant and x is the displacement from the equilibrium position. We can assume that the spring is initially compressed by a certain amount, and then released to launch the cart up the hill. The amount of compression is not given in the problem, so we cannot calculate the exact value of k or x. However, we can still solve for the elastic potential energy using the information given.
The equation for gravitational potential energy is:
Gravitational potential energy = m * g * h
where m is the mass of the cart, g is the acceleration due to gravity (9.8 m/s^2), and h is the height of the hill. We can calculate the gravitational potential energy as:
Gravitational potential energy = 8.0 kg * 9.8 m/s^2 * 11 m
= 862.4 J
Since the cart comes to rest at the top of the hill, all of the gravitational potential energy is converted back into elastic potential energy. Therefore:
Elastic potential energy = Gravitational potential energy
= 862.4 J
Note that we did not need to know the values of k or x to solve for the elastic potential energy in this case. However, if we had more information about the spring (such as the spring constant or the amount of compression), we could use the elastic potential energy equation to calculate the energy more precisely.
Visit https://brainly.com/question/29311518 to learn more about Elastic Potential Energy
#SPJ11
What is the velocity of a soccer ball in meters per second (m/s) with a mass of 1.0 kg that is kicked from rest if the coefficient of restitution between the ball and the foot is 0.48? the initial velocity of the foot is 16.1 m/s and has a mass of 7.8 kg.
The final velocity of the soccer ball is 65.2 m/s. This is to calculate the momentum of the foot before collision. Use coefficient of restitution to calculate velocity of separation.
To find the velocity of the soccer ball after being kicked, we can use the law of conservation of momentum and the coefficient of restitution. The law of conservation of momentum states that the momentum before the collision is equal to the momentum after the collision.
Here's how we can solve the problem:
Calculate the momentum of the foot before the collision:
Momentum = mass x velocity = 7.8 kg x 16.1 m/s = 125.58 kg m/s
During the collision, some of the momentum is transferred to the ball. The amount of momentum transferred depends on the coefficient of restitution, which is given as 0.48. The coefficient of restitution is the ratio of the velocity of separation to the velocity of approach.
Use the coefficient of restitution to calculate the velocity of separation:
Velocity of separation = coefficient of restitution x velocity of approach
Velocity of separation = 0.48 x 16.1 m/s = 7.728 m/s
Calculate the velocity of the ball after the collision using the law of conservation of momentum:
Momentum before collision = Momentum after collision
(7.8 kg x 16.1 m/s) = (1.0 kg x velocity of ball) + (7.8 kg x 7.728 m/s)
125.58 kg m/s = 1.0 kg x velocity of ball + 60.38 kg m/s
Velocity of ball = (125.58 kg m/s - 60.38 kg m/s)/1.0 kg
Velocity of ball = 65.2 m/s
Therefore, the velocity of the soccer ball after being kicked is 65.2 m/s.
In summary, we can use the law of conservation of momentum and the coefficient of restitution to find the velocity of the soccer ball after being kicked. The momentum before the collision is equal to the momentum after the collision.
The coefficient of restitution is the ratio of the velocity of separation to the velocity of approach. Using these equations, we calculated the velocity of the soccer ball to be 65.2 m/s.
To know more about velocity refer here:
https://brainly.com/question/19979064#
#SPJ11
Neglecting air speed, how fast must you toss a ball straight up in order for it to take 6 seconds to return to its initial level?
The initial velocity with which the ball must be thrown upwards in order for it to take 6 seconds to return to its initial level is 29.4 meters/second.
Assuming negligible air resistance, the time taken by a ball to go up and come down after being thrown vertically upwards is given by:
t = 2*v/g
where:
t = time taken for the ball to go up and come down (in seconds)
v = initial velocity with which the ball is thrown upwards (in meters/second)
g = acceleration due to gravity
In this case, the time taken for the ball to return to its initial level is given as 6 seconds. Therefore, we can write:
6 seconds = 2*v/g
Rearranging the equation, we get:
v = (6 seconds * g)/2 = 29.4 m/s
To know more about resistance refer here
https://brainly.com/question/14327116#
#SPJ11
(b) The volume of the cylinder is 0. 0020m". The pressure inside the cylinder is
initially 200 atmospheres. When the cylinder is connected to the balloon, the final
pressure in the cylinder and the balloon is 1. 0 atmosphere. The temperature of the
gas remains constant. Calculate the final volume of gas in the balloon. State the
equation that you use.
To determine the pressure inside the cylinder, we need to use the ideal gas law equation, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
In this case, we know the volume of the cylinder is 0.0020m, but we don't have any information about the temperature or the number of moles of gas inside the cylinder. Therefore, we cannot directly calculate the pressure inside the cylinder using the ideal gas law equation.
However, we can make some assumptions based on the context of the problem. For example, if the cylinder is filled with a gas at a constant temperature, we can assume that the temperature remains constant and use the simplified equation P1V1 = P2V2, where P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume.
Alternatively, if we know the mass and type of gas inside the cylinder, we can use the equation P = (m/V)RT, where m is the mass of gas and (m/V) is the density of the gas. This equation allows us to calculate the pressure inside the cylinder using the known volume and the density of the gas.
Overall, the calculation of pressure inside the cylinder depends on the specific information provided in the problem and the appropriate equation to use.
To know more about ideal gas refer here
https://brainly.com/question/31463642#
#SPJ11
I need to know the answers for 2 and 3
The ride's spring constant is 8625 N/m.
The Nerf gun's spring has a spring constant of 920 N/m.
How to calculate spring constant?To find the spring constant:
F = kx
where F = force applied to the spring, k = spring constant, and x = displacement of the spring.
Find the force applied to the spring, using Newton's second law:
F = ma
where m = combined mass of the Peas and their car, and a = acceleration of the car as it comes to a stop.
Since the car is initially moving at a constant velocity of 1.0 m/s, its initial acceleration is 0 m/s². Therefore, the only acceleration acting on the car is the deceleration caused by the spring.
To find the deceleration, using the equation:
v² = u² + 2as
where v = final velocity (0 m/s), u = initial velocity (1.0 m/s), a = acceleration, and s = displacement (0.20 m).
Rearranging this equation to solve for a:
a = (v² - u²) / (2s) = (0 - 1.0²) / (2 x 0.20) = -2.5 m/s²
Using Newton's second law to find the force applied to the spring:
F = ma = 690 kg × (-2.5 m/s²) = -1725 N
Finally, use the formula F = kx to solve for k:
k = F / x = -1725 N / (-0.20 m) = 8625 N/m
Therefore, the spring constant of the ride is 8625 N/m.
3) To find the spring constant, use the formula:
v = √(kx² / m)
where v = velocity of the dart, k = spring constant, x = displacement of the spring (0.04 m), and m = mass of the dart (0.92 g = 0.00092 kg).
Solving for k:
k = m v² / x² = 0.00092 kg × (16 m/s)² / (0.04 m)² = 920 N/m
Therefore, the spring constant of the spring used in the Nerf gun is 920 N/m.
Find out more on spring constant here: https://brainly.com/question/1968517
#SPJ1
you are 1.9 m tall and stand 3.2 m from a plane mirror that extends vertically upward from the floor. on the floor 1.5 m in front of the mirror is a small table 0.80 m high. what is the minimum height the mirror must have fro you to be able to see the top of the table in the mirror?
The minimum height the mirror must have for you to be able to see the top of the table in the mirror is 4.5 meters.
To see the top of the table in the mirror, the line of sight from your eyes to the top of the table must reflect off the mirror and enter your eyes. This means that the angle of incidence (the angle between the incident light and the normal to the mirror) must equal the angle of reflection (the angle between the reflected light and the normal to the mirror).
Let h be the height of the mirror. The distance from your eyes to the top of the table is:
d = 1.9 m + 0.8 m = 2.7 m
The distance from the mirror to the top of the table (along the reflected path) is:
2 × 3.2 m = 6.4 m
The angle of incidence is the angle between the line of sight from your eyes to the top of the table and the normal to the mirror. This angle can be calculated using trigonometry. The opposite side of the angle is the height of your eyes above the floor (1.9 m), and the adjacent side is the distance from your eyes to the mirror (3.2 m). Thus:
sin θ = opposite/hypotenuse = 1.9/3.2 = 0.59375
θ = sin^-1(0.59375) = 36.87°
Since the angle of incidence equals the angle of reflection, the angle between the reflected path and the normal to the mirror is also 36.87°.
Using trigonometry, we can find the height of the mirror required for the top of the table to be visible in the mirror. The opposite side of the angle is the height of the mirror, and the adjacent side is the distance from the mirror to the top of the table (6.4 m). Thus:
tan θ = opposite/adjacent = h/6.4
h = 6.4 × tan 36.87° = 4.5 m
To know more about mirror, here
brainly.com/question/31383194
#SPJ4
How do you convert 1440 am (amplitude modulation) to hertz (hz)?
This is because kilohertz means 1000 hertz, so by multiplying the AM frequency in kilohertz by 1000, we obtain the frequency in hertz. So 1440 kHz is equal to 1,440,000 Hz.
AM (amplitude modulation) is a type of radio transmission where the amplitude of the carrier wave is varied in proportion to the information signal.
It is specified in terms of frequency in kilohertz (kHz). To convert 1440 AM to Hz, we need to multiply it by 1000.
Therefore, 1440 AM = 1440 kHz = 1440000 Hz.
This is because kilohertz means 1000 hertz, so by multiplying the AM frequency in kilohertz by 1000, we obtain the frequency in hertz. So 1440 kHz is equal to 1,440,000 Hz.
To know more about amplitude modulation, refer here:
https://brainly.com/question/13265507#
#SPJ11
A light bulb carries a current i. the power dissipated in the light bulb is p. what is the power dissipated if the same light bulb carries a current of 3i
The power dissipated in the light bulb if it carries a current of 3i is 9p.
The power dissipated by a light bulb is given by the equation P = I²R, where I is the current flowing through the bulb and R is its resistance. Since the same light bulb is being used, its resistance remains constant.
When the current flowing through the bulb is increased to 3i, the power dissipated is given by P' = (3i)²R = 9i²R = 9P,
where P is the power dissipated when the current was i.
Therefore, the power dissipated in the light bulb is multiplied by a factor of 9 when the current is increased to 3i.
Assuming the resistance of the light bulb remains constant, we can use Ohm's law to find the new current when the current is tripled. Ohm's law states that the current flowing through a conductor is directly proportional to the voltage applied across it and inversely proportional to its resistance. Therefore, when the current is tripled, the voltage across the bulb will also triple since the resistance remains constant.
To know more about the Light bulb, here
https://brainly.com/question/2288858
#SPJ4
Rolanda sees an error in her friend’s graphic organizer comparing electrical and gravitational forces. a venn diagram with two intersecting circles. the circle on the left is labeled gravitational force. the circle on the right is labeled electrical force. there is an x in the circle on the left with infinite reach and depends on mass. in the circle on the right is z with depends on charge. there is a y in the intersecting area. which change should rolanda suggest to her friend to correct the error? the note about mass belongs in region z, and the note about charge belongs in region x. the note about mass belongs in region y, and the note about infinite reach belongs in region z. the note about charge belongs in region y. the note about infinite reach belongs in region y.
Rolanda needs to advise her friend to place the note about mass in region z and the note about charge in region x to fix the mistake in the Venn diagram. Therefore, the correct answer is option A.
Rolanda should suggest to her friend that the note about mass belongs in region z, and the note about charge belongs in region x. This correction is necessary because gravitational force depends on mass, while electrical force depends on charge.
The x in the circle on the left with infinite reach and depends on mass is incorrect because gravitational force does not have infinite reach. It only acts between objects with mass that are in close proximity to each other. The y in the intersecting area is also incorrect because there is no force that is common to both gravitational and electrical forces.
On the other hand, the z in the circle on the right with depends on charge is correct because electrical force depends on the charge of the objects involved. By suggesting that the note about mass belongs in region z and the note about charge belongs in region x, the Venn diagram will accurately represent the differences between gravitational and electrical forces.
In summary, Rolanda should suggest to her friend that the note about mass belongs in region z and the note about charge belongs in region x. Therefore, the correct answer is option A.
This will correct the error in the Venn diagram and accurately represent the differences between gravitational and electrical forces. It is important to understand these differences in order to properly understand the behavior of objects in our world.
To know more about Venn Diagram refer here:
https://brainly.com/question/29301560#
#SPJ11
During practice a soccer player kicks a ball and sends it rolling across the grass. Over a short distance the ball slows down and stops which two statements support the idea that energy is conserved in this example? Please Hurry
Energy cannot be created or destroyed, it can only be converted from one form to another. When the soccer player kicked the ball, they transferred their kinetic energy to the ball, causing it to move.
As the ball rolled across the grass, its kinetic energy was gradually converted into other forms of energy, such as frictional heat and sound energy, causing it to slow down and eventually stop.
The total amount of energy in a closed system remains constant. In this case, the system is the ball and the grass.
Even though the ball slowed down and stopped, the total amount of energy in the system remained the same, as the kinetic energy of the ball was converted into other forms of energy, such as heat and sound. Therefore, energy was conserved in this example.
To know more about kinetic energy, refer here:
https://brainly.com/question/26472013#
#SPJ11
Two students are given cubic boxes, measuring 10 cm on a side. robert puts a single glass marble with a diameter of 10 cm in the box. susan puts 1,000 1-cm glass marbles in her box. which box is heavier?
The total mass of the glass marbles is m = ρV = 2500 kg/m³ × 4.19×[tex]10^{-3}[/tex] m³ = 10.5 g. Susan's box is heavier than Robert's box because it contains more glass mass.
Assuming the density of the glass marbles is constant, the weight of each box will depend on the total mass of glass in the box.
The volume of the single glass marble is (4/3)πr³ = (4/3)π(0.05m)³ = 5.24×[tex]10^{-5}[/tex] m³. The volume of the box is 10 cm × 10 cm × 10 cm = [tex]10^{-3}[/tex] m³.
Therefore, only one glass marble can fit in the box, which has a total mass of m = ρV = 2500 kg/m³ × 5.24×[tex]10^{-5}[/tex] m³ = 0.13 g.
The volume of 1,000 glass marbles is 1000 × (4/3)π(0.01m)³ = 4.19×[tex]10^{-3}[/tex] m³. Therefore, the total mass of the glass marbles is m = ρV = 2500 kg/m³ × 4.19×[tex]10^{-3}[/tex] m³ = 10.5 g.
Thus, Susan's box is heavier than Robert's box because it contains more glass mass.
To know more about density, refer here:
https://brainly.com/question/23685809#
#SPJ11
A truck with the mass of 8 ton travels at a velocity of 60km/h and collides with a truck with mass of 5 ton travelling in the same direction at 40kh/h. After the collision the two trucks move together. Calculate the final common velocity if the TWO trucks in m/s after the collision?
The final common velocity of the two trucks after the collision is 14.53 m/s.
To calculate the final common velocity of the two trucks after the collision, we will use the law of conservation of momentum. The given terms are: the mass of the first truck (8 tons), its velocity (60 km/h), the mass of the second truck (5 tons), and its velocity (40 km/h).
First, we need to convert the velocities from km/h to m/s:
60 km/h = (60 * 1000 m) / (3600 s) = 16.67 m/s
40 km/h = (40 * 1000 m) / (3600 s) = 11.11 m/s
Next, we calculate the initial momentum of both trucks:
Initial momentum = (mass of first truck * its velocity) + (mass of second truck * its velocity)
Initial momentum = (8 * 16.67) + (5 * 11.11) = 133.36 + 55.55 = 188.91 kg m/s
Since both trucks move together after the collision, we can find their combined mass (13 tons) and use it to calculate the final common velocity:
Final common velocity = Initial momentum / Combined mass
Final common velocity = 188.91 kg m/s / 13 tons = 14.53 m/s
So, the final common velocity of the two trucks after the collision is 14.53 m/s.
To know more about collision, refer here:
https://brainly.com/question/24616147#
#SPJ11
What mass of copper metal would absorb 250. 0KJ when it melted at its melting point
The mass of copper metal that would absorb 250.0 kJ when it melts at its melting point is: approximately 1212.1 grams.
To determine the mass of copper metal that would absorb 250.0 kJ when it melts at its melting point, you need to use the specific heat capacity and enthalpy of fusion of copper. The specific heat capacity of copper is 0.385 J/g·°C, and the enthalpy of fusion (the amount of energy needed to melt 1 gram of copper) is 13.1 kJ/mol.
First, you need to convert the energy absorbed (250.0 kJ) to joules: 250.0 kJ * 1000 J/kJ = 250,000 J.
Next, we can use the formula:
Q = m × ΔH_fusion, where Q is the energy absorbed (in joules), m is the mass (in grams), and ΔH_fusion is the enthalpy of fusion (in joules/gram). We need to convert the enthalpy of fusion from kJ/mol to J/g.
The molar mass of copper is 63.5 g/mol. Therefore, ΔH_fusion = (13.1 kJ/mol) * (1000 J/kJ) / (63.5 g/mol) ≈ 206.3 J/g.
Now we can solve for the mass of copper (m):
m = Q / ΔH_fusion
m = 250,000 J / 206.3 J/g ≈ 1212.1 g
So, the mass of copper metal that would absorb 250.0 kJ when it melts at its melting point is approximately 1212.1 grams.
To know more about melting point, refer here:
https://brainly.com/question/30273828#
#SPJ11
4. what is the gravitational attraction between two objects of mass 5,000,000kg (5.0 x 106 kg) at a distance of
100 meters from each other? estimate g as 6.67 * 10-11 n (m/kg)?
a. ion
b. .17 n
c. 57000 n
d. 2300 n
e. 1900 n
help asap no rocky
The gravitational attraction between the two objects is approximately 167.5 N, which is closest to option B. 0.17 N.
We'll use the gravitational attraction formula to find the gravitational force between two objects of mass 5,000,000 kg ([tex]5×[/tex][tex]10^{6}[/tex] kg) at a distance of 100 meters from each other, with an estimated gravitational constant (G) of [tex]6.67[/tex]×[tex]10^{-11}[/tex] N(m/kg)².
The formula is:
F = [tex]G(\frac{mM}{r^{2}})[/tex]
where F is the gravitational force, G is the gravitational constant, m₁, and m₂ are the masses of the two objects, and r is the distance between them.
F=[tex]\frac{(6.67)(10^{-11} )[(5.0)(10^{6})]^2}{(100)^2}N[/tex]
Step 1: Calculate the product of the masses:
[tex](5.0)(10^6)(5.0)(10^6) = 25(10^{12} )[/tex] kg²
Step 3: Calculate the square of the distance:
[tex]100^{2} m^{2}[/tex] = 10,000 m²
Step 4: Calculate the gravitational force:
F = [tex]\frac{(6.67)(10^{-11} )(25.0)(10^{12})}{(10,000)} N[/tex]
Step 5: Simplify the equation:
F = [tex](6.67)(25)10^{-11 + 12 - 4} N[/tex]
Step 6: Calculate the final value:
F ≈ [tex]167.5[/tex]×[tex]10^{-3}[/tex]≈ 167.5 N
To know more about the calculation of gravitational attraction visit:
https://brainly.com/question/28009700
#SPJ11
A wheel 2. 10 m in diameter lies in a vertical plane and rotates about its central axis with a constant angular acceleration of 3. 75 rad/s2. The wheel starts at rest at t = 0, and the radius vector of a certain point P on the rim makes an angle of 57. 3° with the horizontal at this time. At t = 2. 00 s, find the following
The initial values, radius, and angular acceleration are given. The obtained values are: angular speed = 7.50 rad/s, tangential speed = 7.88 m/s, total acceleration = 59.0 m/s², and angular position = 75.3°.
(a) To find the angular speed of the wheel at t = 2.00 s, we use the equation:
ω[tex]\omega = \omega 0 + \alpha t[/tex]
where ω0 is the initial angular speed (which is 0 since the wheel starts at rest), α is the angular acceleration, and t is the time. Thus, we have:
[tex]\omega = 0 + (3.75\;rad/s^2)(2.00 s) = 7.50\;rad/s[/tex]
Therefore, the angular speed of the wheel at t = 2.00 s is 7.50 rad/s.
(b) To find the tangential speed of point P at t = 2.00 s, we use the equation:
[tex]v = r\omega[/tex]
where r is the radius of the wheel (which is half its diameter, or 1.05 m) and ω is the angular speed we found in part (a).
Thus, we have: v = (1.05 m)(7.50 rad/s) = 7.88 m/s
Therefore, the tangential speed of point P at t = 2.00 s is 7.88 m/s.
(c) To find the total acceleration of point P at t = 2.00 s, we need to find both its tangential acceleration and radial (centripetal) acceleration. The tangential acceleration is given by:
[tex]at = r\alpha[/tex]
where r is the radius of the wheel and α is the angular acceleration. Thus, we have:
[tex]at = (1.05\;m)(3.75\;rad/s^2) = 3.94\;m/s^2[/tex]
The radial acceleration is given by: [tex]ar = v^2/r[/tex]
where v is the tangential speed we found in part (b) and r is the radius of the wheel. Thus, we have:
[tex]ar = (7.88\;m/s)^2/(1.05\;m) = 58.8\;m/s^2[/tex]
The total acceleration is then the vector sum of these two components, so:
[tex]a = \sqrt{(at^2 + ar^2)}[/tex]
[tex]a = \sqrt{[(3.94\;m/s^2)^2 + (58.8\;m/s^2)^2][/tex]
[tex]a = 59.0\;m/s^2[/tex]
Therefore, the total acceleration of point P at t = 2.00 s is [tex]59.0\;m/s^2.[/tex]
(d) To find the angular position of point P at t = 2.00 s, we use the equation:
[tex]\theta = \theta 0 + \omega 0t + (1/2)\alpha t^2[/tex]
where θ0 is the initial angular position (which is given as 57.3°), ω0 is the initial angular speed (which is 0), α is the angular acceleration, and t is the time. Thus, we have:
[tex]\theta = 57.3^{\circ} + 0 + (1/2)(3.75\;rad/s^2)(2.00 s)^2 = 75.3^{\circ}[/tex]
Therefore, the angular position of point P at t = 2.00 s is 75.3°.
To know more about acceleration refer here:
https://brainly.com/question/30660316#
#SPJ11
Complete Question:
A wheel 2. 10 m in diameter lies in a vertical plane and rotates about its central axis with a constant angular acceleration of 3. 75 rad/s2. The wheel starts at rest at t = 0, and the radius vector of a certain point P on the rim makes an angle of 57. 3° with the horizontal at this time. At t = 2. 00 s, find the following:
(a) the angular speed of the wheel.
(b) the tangential speed of the point P.
(c) the total acceleration of the point P.
(d) the angular position of the point P.
As the color of light changes from red to yellow, the frequency of the light
Two polythene balls have the same charge. Each ball has an excess of N = 105 protons. The balls are initially separated by a distance, d = 1. 6 m. The Coulomb constant is k = 8. 988 × 109 N m2/C2.
The electric force between the two polythene balls is 1.505 N.
We are given the following information:
The two polythene balls have the same charge.
Each ball has an excess of N = 105 protons.
The balls are initially separated by a distance, d = 1.6 m.
The Coulomb constant is k = [tex]8.988 *10^9 N m^2/C^2.[/tex]
To find the electric force between the two polythene balls, we can use Coulomb's Law:
electric force = [tex]k * (q1 * q2) / d^2[/tex]
where:
- k is the Coulomb constant
- q1 and q2 are the charges of the two polythene balls
- d is the distance between the two polythene balls
Since the two polythene balls have the same charge, we can substitute N for both q1 and q2.
So the equation becomes:
electric force = [tex]k * (N * N) / d^2\\[/tex]
Substituting the given values, we get:
electric force = [tex]8.988 *10^9 N m^2/C^2 * (105 * 105) / (1.6 m)^2[/tex]
electric force = 1.505 N (rounded to three decimal places)
To know more about Coulomb's Law refer here
https://brainly.com/question/506926#
#SPJ11
in which of the following situations does the car have a nonzero acceleration?multiple select question.the car is on cruise control traveling around a curve.the car starts from rest and speeds up to the speed limit moving in a straight line.the car is on cruise control traveling in a straight line.the car is parked.the car is traveling at the speed limit and then comes to a complete stop while traveling around a curve.the car is traveling at the speed limit, and then it comes to a complete stop in a straight line.
The car has a nonzero acceleration in the following situations:
The car starts from rest and speeds up to the speed limit moving in a straight line.The car is traveling at the speed limit and then comes to a complete stop while traveling around a curve.The car is traveling at the speed limit, and then it comes to a complete stop in a straight line. Options 1, 2, and 3 are correct.Acceleration is defined as the rate of change of velocity with respect to time. Therefore, any change in the velocity of the car, whether it is an increase, decrease, or change in direction, results in a nonzero acceleration. When the car starts from rest and speeds up or comes to a stop, its velocity changes, resulting in a nonzero acceleration.
Similarly, when the car comes to a complete stop while traveling around a curve or in a straight line, its velocity changes direction, resulting in a nonzero acceleration. However, when the car is on cruise control and traveling at a constant speed in a straight line, its velocity is not changing, and therefore, its acceleration is zero. Options 1, 2, and 3 are correct.
To know more about the Cruise control, here
https://brainly.com/question/13607082
#SPJ4
two cars drive from one stoplight to the next, leaving at the same time and arriving at the same time. is there ever a time when they are going the same speed? prove or disprove.
Yes, the cars will have a time when the two cars are traveling at the same speed if they leave at the same time and arrive at the same time.
Let's assume that the two cars have different velocities and their positions at any given time can be represented as x₁(t) and x₂(t), where t is the time in seconds. We know that the two cars leave at the same time and arrive at the same time, so the time taken for both cars to travel from the starting point to the end point is the same. Let's call this common time "t".
So, x₁(t) = x₂(t) (both cars arrive at the same point)
Differentiating both sides with respect to time, we get:
v₁ = v₂
where v₁ and v₂ are the velocities of the two cars.
Therefore, if the two cars leave at the same time and arrive at the same time, then there must be a time when they are traveling at the same velocity.
This can be proven using calculus by showing that if the two cars have different velocities at any given time, then there must be a point in time when their velocities are equal. This is because the derivative of the difference in their positions with respect to time (x₁(t) - x₂(t)) is the difference in their velocities (v₁ - v₂), which must be non-zero for any non-zero difference in their positions. Since the derivative of a continuous function can only change sign at a point where it is zero, there must be a time when v₁ = v₂.
Therefore, we have proved that there must be a time when the two cars are traveling at the same speed if they leave at the same time and arrive at the same time.
To know more about time, here
brainly.com/question/28187872
#SPJ4
--The complete question is, Two cars drive from one spotlight to the next, leaving at the same time and arriving at the same time. Is there ever a time when they are going the same speed? Prove or disprove.--
An object is being pulled along a rough table with a frictional force of 7N acting
upon the object. The object is being pulled along by a horizontal force of 18N and
weighs 30N.
To fathom this issue, we have to be utilize Newton's moment law of movement, which states that the net force acting on an question is equal to the item of its mass and increasing speed. Able to utilize this law to discover the speeding up of the object:
Net force= ma
where m is the mass of the object and a is its increasing speed.
What is the the net force of the object?In this case, the net force is the horizontal force of 18N short the frictional constrain of 7N:
Net constrain = 18N - 7N = 11N
The mass of the object is given as 30N, so we are able modify the condition to unravel for the speeding up:
a = Net force / m = 11N / 30N = 0.37 m/s^2
Hence, the object is accelerating at a rate of 0.37 m/s^2 along the table.
Learn more about newton second law from
https://brainly.com/question/25545050
#SPJ1
You are watching Canada day fireworks from a distance. You observe the light, and then hear the sound 3. 50 seconds later. How far are you from the location of the firework, if the termometer outside of yur home shows a temperature of 5. 00 degrees celcius?
You are approximately 1170.96 meters away from the location of the firework.
We know that the time difference between seeing the light and hearing the sound is 3.50 seconds. The speed of sound in air depends on the temperature, so we need to use the temperature information to calculate the speed of sound. The formula for the speed of sound in air at a given temperature is:
v = 331.3 + 0.606T
where v is the speed of sound in meters per second, and T is the temperature in degrees Celsius.
Substituting T = 5.00 degrees Celsius, we get:
v = 331.3 + 0.606 × 5.00
v = 334.56 m/s
Now we can calculate the distance to the firework using the formula:
d = v × t
where d is the distance, v is the speed of sound, and t is the time difference between seeing the light and hearing the sound.
Substituting v = 334.56 m/s and t = 3.50 s, we get:
d = 334.56 × 3.50
d = 1170.96 m
To know more about temperature, here
brainly.com/question/11464844
#SPJ4
Why is it important to change the sampling rate in analog to digital converter?
Answer:
higher sampling rates afford greater overall conversion accuracy
Explanation:
It should be intuitively obvious that higher sampling rates afford greater overall conversion accuracy. Of course, there is a trade-off associated with high sampling rates, and that is the accompanying high data rate. In other words, greater resources will be required to store and process the larger volume of digital information.
- Look at the part of your circuit that connects the battery, switch, and red bulb.
Do you have them wired in series or parallel?
The part of the circuit that connects the battery, switch, and red bulb is a critical component in ensuring that the circuit functions correctly. The battery is the power source that provides the energy needed to light up the red bulb, while the switch is the control mechanism that allows the user to turn the circuit on and off.
When the switch is closed, the circuit is completed, and the battery's energy is directed through the wires and into the red bulb. The bulb then converts this energy into light, illuminating the area around it. However, when the switch is open, the circuit is broken, and no energy flows through it.
It is essential to ensure that the connections in this part of the circuit are secure and correctly placed. Any loose or improper connections can cause the circuit to malfunction or not work at all. Additionally, it is crucial to use the correct voltage and amperage rating for the battery and bulb to ensure that they operate within their specified limits and do not damage the circuit.
Overall, the part of the circuit that connects the battery, switch, and red bulb is a crucial component that enables the circuit to function correctly. By ensuring that the connections are secure and the components are properly rated, users can enjoy a safe and reliable circuit that lights up the area around them.
To know more about battery refer here
https://brainly.com/question/11670669#
#SPJ11
A vertical spring scale can measure weights up to 215 n . the scale extends by an amount of 10.5 cm from its equilibrium position at 0 n to the 215 n mark. a fish hanging from the bottom of the spring oscillates vertically at a frequency of 2.50 hz .
A fish weighing 0.045 kg is measured using a frequency of 2.50 Hz. Its weight is calculated to be 215 N using the spring constant and displacement of the scale.
Assuming the oscillations of the fish on the spring are simple harmonic, we can use the formula for the period of a simple harmonic oscillator to find the frequency of oscillation:
[tex]T = 1/f = 2\pi \sqrt{(m/k)}[/tex]
where T is the period, f is the frequency, m is the mass of the object, and k is the spring constant.
To find k, we can use Hooke's law, which states that the force exerted by a spring is proportional to the amount of stretch or compression:
F = -kx
where F is the force, k is the spring constant, and x is the displacement from the equilibrium position.
Using the information given in the problem, we can calculate the spring constant:
k = F/x
k = (215 N) / (0.105 m)
k = 2047.6 N/m
Then, we can use the formula for the period of oscillation to find the frequency:
[tex]T = 2\pi \sqrt{(m/k)}[/tex]
[tex]2\pi \sqrt{(m/k)} = 1/f[/tex]
[tex]f = 1 / [2\pi \sqrt{(m/k)}][/tex]
[tex]f = 1 / [2\pi \sqrt{(m/2047.6)}][/tex]
f = 2.5 Hz (as given in the problem)
Therefore, we can use the frequency of 2.50 Hz to calculate the mass of the fish:
[tex]2.50 = 1 / [2\pi \sqrt{(m/2047.6)}][/tex]
m = 0.045 kg
Finally, we can use the spring constant and the displacement of the scale to find the weight of the fish:
F = kx = (2047.6 N/m)(0.105 m) = 215 N
Therefore, the weight of the fish is 215 N.
To know more about frequency refer here:
https://brainly.com/question/29739263#
#SPJ11
A 0.050 kg bullet strikes a 5.0 wooden block and embeds itself
15. true or false convection drives movement of the tectonic plates which does not involve subduction.
The given statement "convection drives movement of the tectonic plates which does not involve subduction" is false because tectonic plate movement caused by mantle convection involves subduction.
Convection plays a crucial role in driving the movement of tectonic plates, which includes subduction. The Earth's mantle is divided into several convection cells that transfer heat and matter from the interior of the Earth towards the surface.
As the hotter material rises towards the surface, it displaces colder and denser material, which sinks back down into the interior. This convection cycle causes the movement of tectonic plates, as the plates are essentially riding on top of the flowing mantle.
Subduction occurs when one tectonic plate is forced beneath another due to differences in density and temperature. This process is driven by the movement of the plates themselves, which in turn is driven by the underlying convection currents in the mantle.
In summary, the movement of tectonic plates is driven by convection currents in the mantle, and subduction is one of the important processes involved in this movement.
To know more about tectonic refer here:
https://brainly.com/question/31796227#
#SPJ11
1. Fish are hung on a spring scale to determine their mass (most fishermen feel no obligation to truthfully report the mass).
(a) What is the force constant of the spring in such a scale if it the spring stretches 8. 00 cm for a 10. 0 kg load?
(b) What is the mass of a fish that stretches the spring 5. 50 cm?
(c) How far apart are the half-kilogram marks on the scale?
Please include all of your steps
The force constant of the spring in such a scale if the spring stretches 8. 00 cm for a 10. 0 kg load is 1225 N/m. The mass of the fish is 6.88 kg. The half-kilogram marks on the scale are 4 cm apart.
Spring scales are commonly used by fishermen to determine the mass of the fish they catch. The scale works by measuring the force exerted by the fish on a spring, which is directly proportional to the fish's weight. The spring scale can be calibrated to read the mass of the fish based on the spring's force constant.
(a) The force constant of the spring can be calculated using Hooke's law, which states that the force exerted by a spring is directly proportional to its displacement. Therefore, the force constant of the spring is given by k = F/x, where F is the force exerted by the spring and x is the displacement.
For a 10.0 kg load that stretches the spring 8.00 cm, the force exerted by the spring is F = kx [tex]= (10.0 \;kg)(9.8 \;m/s^2)[/tex]= 98 N. Therefore, the force constant of the spring is k = F/x = 98 N/0.080 m = 1225 N/m.
(b) To determine the mass of a fish that stretches the spring 5.50 cm, we can use the force constant of the spring to find the force exerted by the fish. The force exerted by the spring is F = kx = (1225 N/m)(0.055 m) = 67.4 N.
The mass of the fish can then be calculated using the formula F = mg, where g is the acceleration due to gravity. Therefore, the mass of the fish is m = F/g = 6.88 kg.
(c) The distance between the half-kilogram marks on the scale can be found by calculating the displacement of the spring for a 0.5 kg load.
Using the force constant of the spring, we can find the displacement x = F/k = [tex](0.5 \;kg)(9.8 \;m/s^2)/(1225\; N/m)[/tex] = 0.04 m. Therefore, the half-kilogram marks are 4 cm apart.
In summary, the force constant of the spring in a fish scale can be used to determine the mass of a fish based on the displacement of the spring. The force constant can be calculated using Hooke's law, and the mass of the fish can be found using the formula F = mg.
The distance between the half-kilogram marks on the scale can be found by calculating the displacement of the spring for a 0.5 kg load.
To know more about force refer here:
https://brainly.com/question/26115859#
#SPJ11
Help urgent- Two waves travel through the air: wave
A, at 680 Hz, and wave B, at 1760 Hz.
Which wave will travel faster? Why?
The speed of a wave in a medium depends on the properties of that medium, such as its density and elasticity. The frequency of the wave, or the number of cycles it completes in a second, does not affect its speed.
Therefore, both wave A and wave B will travel through the air at the same speed, which is approximately 343 meters per second at room temperature and atmospheric pressure.
However, the wavelength of a wave is inversely proportional to its frequency, so wave B will have a shorter wavelength than wave A.
This means that wave B will have a higher energy and be more directional than wave A, but it will not travel faster through the air.
In summary, the frequency of a wave does not affect its speed in a given medium, and both wave A and wave B will travel through the air at the same speed of approximately 343 meters per second.
To know more about elasticity refer here
https://brainly.com/question/28790459#
#SPJ11
Please describe this graph
a. Explain the relationship between variables.
b. State if it is a linear or nonlinear graph.
c. Give an example of what this graph could be about.
Answers:
a. The relationship between the variables is directly proportional (i.e. the x axis is directly proportional to the y axis).
b. The graph is linear.
c. The graph could represent the cost of renting a boat; the longer you rent it, the higher the cost and vice versa.
a. The relationship between the variables is directly proportional (i.e. the x axis is directly proportional to the y axis).
b. The graph is linear.
c. The cost of hiring a boat could be represented by the graph; the longer you hire it, the more it will cost and vice versa.
what is a graph?A graph is described as a diagram showing the relation between variable quantities, typically of two variables, each measured along one of a pair of axes at right angles.
The purpose of a graph is to present data that are too numerous or complicated to be described adequately in the text and in less space.
Learn more about graphs at: https://brainly.com/question/19040584
#SPJ1
Roger is a forensic investigator. His examination of a dead body reveals that the body is completely limp. Which state is the body in?
A. Rigor Morris
B. Algor Morris
C. Pallor Morris
D. Primary Flaccidity
The dead body is in a completely limp state. This corresponds to option D. Primary Flaccidity.
When a person dies, their muscles lose their ability to contract and maintain tension. This loss of muscle tone is referred to as flaccidity.
Primary flaccidity occurs immediately after death and is characterized by a complete lack of muscle tone and resistance to external forces. The body becomes limp and unresponsive to stimuli.
During primary flaccidity, the muscles lose their ability to maintain their usual length and tension due to the absence of nerve impulses and energy production. As a result, the limbs and other body parts hang loosely without any sign of rigidity or stiffness.
It's important to note that primary flaccidity is an early stage of the postmortem process, which is the series of changes that occur in the body after death.
Over time, secondary changes may occur, such as rigor mortis (muscular stiffening), as the body undergoes further decomposition processes.
In summary, when a dead body is in a completely limp state without any muscular rigidity or resistance, it corresponds to primary flaccidity.
This condition occurs immediately after death and is characterized by the loss of muscle tone and the inability of the muscles to maintain their usual length and tension.
To learn more about decomposition, refer below:
https://brainly.com/question/8009068
#SPJ11
