A truck weighs 7280 pounds. If the pressure exerted by its tires on the ground is 87. 5 pounds per square centimeter,what is the area of one tire that in contact with the road

Aromatic hydrocarbons are organic compounds that contain one or more benzene rings in their structure. These compounds are characterized by their strong, pleasant odor, which is why they are called aromatic. They are commonly found in petroleum products and are often used as feedstock for the production of chemicals and fuels.

Out of the options given, clothing and polyvinyl chloride do not contain aromatic hydrocarbons. On the other hand, barbecue fuel and pain relievers can contain aromatic hydrocarbons.

Barbecue fuel, also known as charcoal briquettes, is made from compressed charcoal dust mixed with a binding agent. The charcoal is made by heating wood in the absence of oxygen to remove the moisture and other impurities. The resulting charcoal contains a high concentration of aromatic hydrocarbons, which gives it its characteristic smell and helps it burn efficiently.

Pain relievers, such as aspirin and ibuprofen, are also known to contain aromatic hydrocarbons. These compounds are used in the synthesis of these drugs as intermediates, and traces of them can be present in the final product. However, the levels are generally low and not considered harmful to health.

In summary, barbecue fuel and pain relievers can contain aromatic hydrocarbons, while clothing and polyvinyl chloride do not. It is important to note that exposure to high levels of these compounds can be harmful to health, and precautions should be taken to minimize exposure.

To know more about hydrocarbons  refer here

https://brainly.com/question/31643106#

#SPJ11

Answer: b

Explanation: because i just took the quiz

The mass of NaCl required to raise the boiling point of 4.73 L of water by 1.00°C is 25.3 g.

The boiling point elevation (ΔTb) is given by the equation ΔTb = Kb × molality, where Kb is the boiling point elevation constant for water (0.51°C/m) and molality is the concentration of solute in mol/kg of solvent. To calculate the molality, we need to convert the volume of water to mass (assuming a density of 1 g/mL) and calculate the number of moles of water. We have:

To raise the boiling point by 1.00°C, we need to find the molality that gives a ΔTb of 1.00°C. Rearranging the equation above, we get:

Now we can calculate the mass of NaCl required to achieve this molality:

Therefore, the mass of NaCl required to raise the boiling point of 4.73 L of water by 1.00°C is 25.3 g (since 550 g is more than the mass of water).

To learn more about boiling point, here

https://brainly.com/question/2153588

#SPJ4

The element Sc (Scandium) was present in Mendeleev's periodic table. Therefore, the correct answer is (a) Sc.

Mendeleev's periodic table:

Mendeleev's periodic table is a chart that organizes all known elements based on their atomic number, chemical properties, and recurring patterns in their physical and chemical properties.

The periodic table consists of rows (called periods) and columns (called groups). Elements in the same group have similar chemical properties, while elements in the same period have the same number of electron shells.

Mendeleev published the first version of his periodic table in 1869, which included 63 elements known at that time. Scandium (Sc) was discovered in 1879 by Lars Fredrik Nilson and was later added to the periodic table in its proper position based on its atomic number and chemical properties.

On the other hand, Technetium (Tc) was not present in Mendeleev's periodic table because it was not discovered until 1937, long after Mendeleev's death. Similarly, Germanium (Ge) was not discovered until 1886, after the publication of Mendeleev's periodic table, but it was added to the periodic table in its proper position based on its properties.

To know more about electron shells, visit:

https://brainly.com/question/30464976

#SPJ9

The standard cell potential (∆°cell) can be calculated using the formula:

∆°cell = ∆°reduction (reduced) - ∆°oxidation (oxidized)

where ∆°reduction and ∆°oxidation are the standard reduction potentials of the reduction and oxidation half-reactions, respectively.

The oxidation half-reaction is:

Ni2+(aq) + 2e- → Ni(s) ∆°oxidation = - 0.26 V

The reduction half-reaction is:

Mg2+(aq) + 2e- → Mg(s) ∆°reduction = - 2.37 V

Therefore, the standard cell potential is:

∆°cell = ∆°reduction - ∆°oxidation

∆°cell = (-2.37 V) - (-0.26 V)

∆°cell = -2.11 V

The equilibrium constant (K) can be calculated from the standard cell potential using the Nernst equation:

∆°cell = -(RT/nF) ln K

where R is the gas constant (8.314 J/(mol·K)), T is the temperature in Kelvin (298 K), n is the number of electrons transferred in the balanced equation (2), and F is the Faraday constant (96,485 C/mol).

Substituting the values and solving for K, we get:

K = exp(-(∆°cell)/(RT/nF))

K = exp(-((-2.11 V)*(96,485 C/mol)/(8.314 J/(mol·K)298 K2)))

K = 1.1 × 10^12

Therefore, the equilibrium constant for the reaction is 1.1 × 10^12.

Visit here to learn more about Nernst equation brainly.com/question/13043546

#SPJ11

To determine which of these combinations would not form a covalent bond, we need to examine the nature of the elements involved. Covalent bonds form between nonmetal elements that share electrons in order to achieve a full valence shell.

1. C and H: Both are nonmetals, so they can form a covalent bond.
2. N and Cl: Both are nonmetals, so they can form a covalent bond.
3. S and Cl: Both are nonmetals, so they can form a covalent bond.

For combinations 4 and 5, one of the elements is a metal:

4. Na and O: Na is a metal, and O is a nonmetal. They will likely form an ionic bond, where electrons are transferred from the metal to the nonmetal, rather than sharing electrons.

5. Cu and O: Cu is a metal, and O is a nonmetal. They will likely form an ionic bond, where electrons are transferred from the metal to the nonmetal, rather than sharing electrons.

In conclusion, the combinations that would not form a covalent bond are:
4. Na and O
5. Cu and O

To know more about Covalent bonds refer here

https://brainly.com/question/19382448#

#SPJ11

The last electron of Ca^2+, the four quantum numbers are Principal quantum number, Azimuthal quantum number, Magnetic quantum number and Spin quantum number.

The quantum numbers are a set of numbers used to describe the properties of an electron, including its energy, angular momentum, and orientation in space.

These numbers help us understand the behavior of electrons in an atom, including how they interact with each other and with external forces.

For the last electron of Ca^2+, the four quantum numbers are:

1. Principal quantum number (n): This number determines the energy level of the electron. For Ca^2+, the last electron is in the n=3 shell.

2. Azimuthal quantum number (l): This number determines the shape of the electron's orbital. For Ca^2+, the last electron is in an s orbital, which has l=0.

3. Magnetic quantum number (m): This number determines the orientation of the orbital in space. For Ca^2+, the last electron's orbital is oriented randomly, so m could be any value between -l and +l.

4. Spin quantum number (s): This number determines the electron's intrinsic angular momentum, or "spin." For Ca^2+, the last electron has a spin of +1/2.

These quantum numbers help us understand the unique properties of the electron in Ca^2+, and can be used to predict its behavior in various chemical and physical processes.

To know more about quantum numbers, visit:

https://brainly.com/question/16746749#

#SPJ11

2.64 x 10³ kJ of energy was produced.

To calculate the energy produced, we need to use the equation:

ΔE = q = nΔH

where ΔE is the energy produced (in joules), q is the heat absorbed or released (in joules), n is the number of moles of gas produced, and ΔH is the enthalpy change (in joules/mol).

First, we need to calculate the number of moles of CO2 produced:

PV = nRT

n = PV/RT

n = (1.18 atm)(60.0 L)/(0.0821 L·atm/mol·K)(298 K)

n = 2.59 mol

Next, we need to find the enthalpy change for the reaction that produced the CO2 gas. Let's assume it is -393.5 kJ/mol (the standard enthalpy of formation of CO2). Therefore, ΔH = -1020 kJ.

Finally, we can calculate the energy produced:

ΔE = q = nΔH

ΔE = (2.59 mol)(-1020 kJ/mol)

ΔE = -2640 kJ

Rounding to three significant figures, we get:

ΔE = -2.64 x 10³ kJ

Therefore, approximately 2.64 x 10³ kJ of energy was produced.

To learn more about moles, refer below:

https://brainly.com/question/31597231

#SPJ11

The common mode of action based on the principle of like-dissolves-like and the concept of solvent-solute interactions is called solvation.

Solute-solvent interactions are described as the intermolecular attractions between a solute particle and a solvent particle.

So in the case that If the intermolecular attractions between solute particles are different compared to the intermolecular attractions between solvent particles it is unlikely dissolution will occur.

An example of  Solute-solvent interactions is when you add salt to water the salt dissolves and distributes uniformly within the water. There is more water than salt. So then we know that water is the solvent.

Learn more about solvent. at:

https://brainly.com/question/25326161

#SPJ1

So, it will take 2.5 seconds for the same amount of hydrogen gas to effuse under the same conditions. Your answer is (B) 2.5 s.

Graham's Law states that the rate of effusion of two gases is inversely proportional to the square root of their molar masses:

rate1 / rate2 = √([tex]\frac{M_{2} }{M_{1} }[/tex])

Here, rate1 is the rate of effusion for oxygen, and rate2 is the rate of effusion for hydrogen. [tex]M_{1}[/tex] and [tex]M_{2}[/tex] are the molar masses of oxygen and hydrogen, respectively.

Given that 5 mol of oxygen gas effuses in 10 seconds, the rate1 is 0.5 mol/s.

The molar mass of oxygen is 32 g/mol, and the molar mass of hydrogen (H2) is 2 g/mol.

Now we can plug in the values:
0.5 / rate2 = √(2 / 32)
rate2 = 0.5 / √(2 / 32) ≈ 2 mol/s

time = 5 mol / 2 mol/s = 2.5 s

So, it will take 2.5 seconds for the same amount of hydrogen gas to effuse under the same conditions. Your answer is (B) 2.5 s.

To know more about effusion visit:

https://brainly.com/question/31444163

#SPJ11

The concentration of [OH⁻] in the solution is 5.0×10⁻⁹ M.

To find the [OH⁻] of the solution with [H3O⁺] = 2.0×10⁻⁶ M, you can use the ion product constant of water, Kw = [H₃O⁺][OH⁻].

Step 1: Write down the known values and the ion product constant of water (Kw = 1.0×10⁻¹⁴ at 25°C).
[H₃O⁺] = 2.0×10⁻⁶ M
Kw = 1.0×10⁻¹⁴

Step 2: Use the formula Kw = [H₃O⁺][OH⁻] to solve for [OH⁻].
1.0×10⁻¹⁴ = (2.0×10⁻⁶ M) × [OH⁻]

Step 3: Divide both sides by [H₃O⁺] to isolate [OH⁻].
[OH⁻] = (1.0×10⁻¹⁴) / (2.0×10⁻⁶ M)

Step 4: Calculate the concentration of [OH⁻].
[OH⁻] = 5.0×10⁻⁹ M
So, the concentration of [OH⁻] in the solution is 5.0×10⁻⁹ M.

To know more about concentration of [OH⁻]:

https://brainly.com/question/31328147

#SPJ11

In terms of political history, some states in the United States have longer and richer histories than others. The states with the longest political histories are those that were among the original thirteen colonies that declared independence from Great Britain in 1776.

These states have a political history that dates back to the colonial period, during which time they were governed by British colonial authorities. Many of these states played a key role in the American Revolution and the founding of the United States.

For example, Massachusetts was the site of the Boston Tea Party and the birthplace of the American Revolution, while Virginia was home to many of the country's founding fathers, including George Washington and Thomas Jefferson.
Other states with notable political histories include California, Texas, and Illinois.

California played a key role in the Civil Rights Movement and the counterculture movement of the 1960s, while Texas was the site of the famous battle of the Alamo and played a key role in the development of the oil industry. Illinois was home to Abraham Lincoln, one of the most important political figures in United States history.

In conclusion, the states with the longest political histories are those that were among the original thirteen colonies, but other states such as California, Texas, and Illinois have also made significant contributions to the political history of the United States.

To know more about political histories  refer here

https://brainly.com/question/12443795#

#SPJ11

A potted plant is placed under a grow lamp, which provides 6,200. J of energy to the plant and the soil over the course of an hour. The specific heat capacity of the soil is about 0. 840 J/g°C and the temperature goes up by 8. 75°C of soil.  800 grams of soil are there

We can use the formula:

Q = m * c * ΔT

where Q is the amount of energy transferred, m is the mass of the material, c is the specific heat capacity of the material, and ΔT is the change in temperature.

We know that Q = 6,200 J, c = 0.840 J/g°C, and ΔT = 8.75°C. We can rearrange the formula to solve for m:

m = Q / (c * ΔT)

Plugging in the values, we get:

m = 6,200 J / (0.840 J/g°C * 8.75°C)

m = 800 grams

Therefore, there are 800 grams of soil.

To know more about the specific heat capacity refer here :

https://brainly.com/question/28941910#

#SPJ11

The net acid-base reaction that occurs when HBr is added to water can be represented as HBr + H₂O → H₃O + Br⁻

When HBr is added to water, it dissociates into its constituent ions, H+ and Br-. These ions then interact with the water molecules, leading to the formation of hydronium ions (H₃O⁺) and bromide ions (Br⁻). This reaction is known as a proton transfer reaction, as a proton (H+) is transferred from the acid (HBr) to the water molecule (H2O) to form a hydronium ion (H₃O⁺).

This reaction can also be understood in terms of the Arrhenius theory of acids and bases, which defines acids as compounds that release hydrogen ions (H⁺) when dissolved in water. In this case, HBr is an acid that releases H⁺ ions when dissolved in water, leading to the formation of the hydronium ion (H₃O⁺).

The reaction between HBr and water is an example of an acid-base reaction, where the acid (HBr) donates a proton to the water molecule (H₂O) to form the hydronium ion (H₃O⁺), which is the conjugate acid of water. The bromide ion (Br⁻) is the conjugate base of HBr.

To know more about the Acid-base reaction, here

https://brainly.com/question/29460273

#SPJ4

A mixture of 24.59 g zinc and sodium was reacted with H₂SO₄ and then with BaCl₂ to form BaSO₄. The percentage of sodium by mass in the mixture was found to be 16.97%.

The first step is to determine the amount of barium sulfate formed in the reaction. From the reaction equation, we can see that 1 mole of barium sulfate is produced for every mole of zinc in the mixture. Therefore, the amount of barium sulfate formed is:

24.59 g Zn x (1 mol Zn / 65.38 g Zn) x (1 mol BaSO₄ / 1 mol Zn) x (233.39 g BaSO₄ / 1 mol BaSO₄) = 8.80 g BaSO₄

Next, we need to calculate the amount of sodium in the original mixture. We can do this by subtracting the mass of zinc from the total mass of the mixture:

Mixture mass - Zinc mass = Sodium mass

24.59 g - (24.59 g x %Zn) = Sodium mass

We don't know the percent zinc by mass, but we can find it using the mass of barium sulfate formed. The mass percent of sodium in the mixture is then:

%Na = (Sodium mass / Mixture mass) x 100

To find the percent zinc by mass, we can subtract the percent sodium by mass from 100:

%Zn = 100 - %Na

Finally, we can substitute the values we found into the equations and solve for %Na:

8.80 g BaSO₄ x (1 mol BaSO₄ / 233.39 g BaSO₄) x (1 mol Na₂SO₄ / 1 mol BaSO₄) x (142.04 g Na₂SO₄ / 1 mol Na₂SO₄) = 4.04 g Na₂SO₄

Mixture mass - Zinc mass = Sodium mass

24.59 g - (24.59 g x %Zn) = Sodium mass

%Na = (Sodium mass / Mixture mass) x 100

Substituting the values we found:

%Na = (4.04 g / 24.59 g) x 100 = 16.4%

Therefore, the percent sodium by mass in the original mixture is 16.4%.

To know more about the percentage of sodium refer here :

https://brainly.com/question/13777347#

#SPJ11

The most probable number (MPN) for this sample can be calculated using the MPN table. Based on the results provided, the MPN for this sample is estimated to be 48 per 100 mL.

The MPN method is a statistical approach used to estimate the concentration of microorganisms in a sample. It involves inoculating multiple replicate tubes with different volumes of the sample and observing growth after a specified period of time. The results are then used to estimate the most probable number of microorganisms in the original sample.

In this case, the results of the test indicate that 3 out of 10 ml tubes, 2 out of 1 ml tubes, and 1 out of 0.1 ml tubes were positive for the presence of microorganisms. Based on these results, the MPN for the sample can be estimated using the MPN table. Using the MPN table, we can determine that the number of positive tubes corresponds to a probability of 0.048. Therefore, the MPN for this sample is estimated to be 48 per 100 mL.

This means that there are likely 48 microorganisms present in every 100 mL of the sample. It's worth noting that the MPN method provides an estimate of the concentration of microorganisms in a sample and is subject to some degree of uncertainty. However, it is a widely used method for assessing the microbiological quality of water and other environmental samples.

To know more about the Tube, here

https://brainly.com/question/15720257

#SPJ4

The evaluated molecular weight  is 40 amu, under the condition that 3. 01 x 10²³ molecules of the compound A2B is present.

The molecular weight of A2B can be evaluated using the following formula
Molecular weight = (2 × atomic mass of A) + (1 × atomic mass of B)
For the given question 3. 01 x 10²³molecules of A2B has a mass of 9.0 grams, we can evaluate the molecular weight as follows

The molar mass of A2B = (9.0 g / 3.01 x 10²³ molecules) = 2.99 x 10⁻²³ g/molecule
The atomic mass of A = 10 amu
The atomic mass of B = 20 amu
Molecular weight = (2 × atomic mass of A) + (1 × atomic mass of B) = (2 × 10 amu) + (1 × 20 amu)
= 40 amu

Hence, the molecular weight of A2B is 40 amu.

To learn more about molecular weight
https://brainly.com/question/14596840
#SPJ4

To determine the mass of magnesium that participated in the chemical reaction, we need to use the concept of mole-mass relationship. The molar mass of magnesium is 24.31 g/mol. Therefore, we can use the following equation:

Mass of magnesium = number of moles of magnesium x molar mass of magnesium
We know that the number of moles of magnesium that participated in the chemical reaction is 0.0750 moles. Therefore, we can substitute these values in the equation to get:

Mass of magnesium = 0.0750 moles x 24.31 g/mol
Mass of magnesium = 1.823 g
Hence, the mass of magnesium that participated in the chemical reaction is 1.823 g.

In a chemical reaction, the reactants react with each other to form new products. During this process, the reactants undergo a chemical change, which involves the breaking and forming of chemical bonds. In this case, magnesium participated in a chemical reaction, which means it reacted with another substance to form a new product.

The chemist was able to determine the number of moles of magnesium that participated in the reaction by using measurements. This information was used to calculate the mass of magnesium that participated in the reaction using the mole-mass relationship. This relationship helps us to determine the mass of a substance when we know the number of moles of that substance.

To know more about magnesium refer here

https://brainly.com/question/1533548#

#SPJ11

The molar concentration of the solution formed when 0.55 mol of Ca(OH)₂ are dissolved in 2.20 liters of HOH is 0.25 mol/L.

To find molar concentration of a solution use the formula:

Molar concentration = moles of solute / volume of solution in liters

The moles of solute are 0.55 mol of Ca(OH)₂ and the volume of the solution is 2.20 liters of H₂O.

So, the molar concentration of the Ca(OH)₂ solution is:

Molar concentration = 0.55 mol / 2.20 L

Molar concentration ≈ 0.25 mol/L

Therefore, the molar concentration of the Ca(OH)₂ solution is 0.25 mol/L.

To learn more about molar visit:

https://brainly.com/question/14923826

#SPJ11

A. 4,7,2,4 set of coefficients will balance the chemical equation below:

4FeS (s) + 7O2 (g) 2Fe2O3 (s) +4SO2 (g)

Stoichiometric coefficients are the numbers required to balance a chemical equation. These are essential because they connect the amounts of reactants used and the products produced. The coefficients are related to the equilibrium constants since they are used to calculate them.

The coefficients indicate how many of each ingredient are present throughout the reaction and can be changed to make the equation balanced.

It makes sense that H2O has a bond order of 2, whereas NH3 has a bond order of 3, given the number of bonds each possesses.

learn more about chemical equation

brainly.com/question/11904811

#SPJ1

The space between particles in a dead star is incredibly vast. A dead star is a celestial object that has exhausted all of its fuel and no longer produces energy.

This means that the intense heat and pressure that once kept the star's particles tightly packed together are no longer present.

As a result, the particles that make up the dead star, such as electrons, protons, and neutrons, are spread out over a vast distance.

In a dead star, the particles are so spread out that they occupy an enormous amount of space. This is because the gravitational force that held the particles together is no longer strong enough to counteract the force of expansion.

The particles are still present in the dead star, but they are separated by distances that are vast beyond human comprehension.

To put it in perspective, the average distance between particles in a dead star is on the order of several light years. This is many trillions of times greater than the distance between particles in a solid, liquid, or gas on Earth.

to know more about dead star refer here:

https://brainly.com/question/1953745#

#SPJ11

The change in temperature of the copper is 42.8°C.

The change in temperature of the copper can be calculated using the formula:

q = m * c * ΔT

where q is the amount of heat transferred, m is the mass of the copper, c is the specific heat capacity of copper, and ΔT is the change in temperature.

Rearranging the formula to solve for ΔT, we get:

ΔT = q / (m * c)

Substituting the given values, we have:

ΔT = 66,300 J / (0.3 g * 390 J/g°C)

ΔT = 42.8°C

Therefore, the change in temperature of the copper is 42.8°C.

To know more about heat transferred, here

brainly.com/question/13433948

#SPJ1

--The complete Question is, What is the change in temperature of a 0.3-gram piece of copper that is fashioned into a bracelet if 66,300 Joules of heat energy is transferred to it? Given that the specific heat of copper is 390 J/gxC. --

31.45 g of dilute trioxonitrate (V) acid containing 10% W/W of pure acid will be required to dissolve 2.5 g of chalk.

We need to use balanced chemical equation of the reaction between calcium carbonate and trioxonitrate (V) acid to determine the number of moles of acid required to dissolve 2.5 g of chalk.

[tex]CaCO_3 + 2HNO_3 → Ca(NO_3)_2 + CO_2 + H_2O[/tex]

From the equation, one mole of [tex]CaCO_3[/tex] reacts with two moles of [tex]HNO_3[/tex]. The molar mass of CaCO3 is 100.09 g/mol.

[tex]Number\ of\ moles\ of\ CaCO_3 = 2.5 g / 100.09 g/mol = 0.02498 mol[/tex]

[tex]Number\ of\ moles\ of HNO_3 = 2 * 0.02498 = 0.04996 mol[/tex]

Now, we can calculate the mass of dilute trioxonitrate (V) acid containing 10% W/W of pure acid required to provide 0.04996 mol of [tex]HNO_3[/tex].

Assuming the density of the dilute trioxonitrate (V) acid is 1.1 g/cm3, the mass of the acid required will be:

[tex]Mass\ of\ acid = (0.04996 mol * 63.01 g/mol) / 0.1 = 31.45 g[/tex]

To know more about calcium carbonate, here

brainly.com/question/13565765

#SPJ4

The molar mass of the unidentified gas is 40.06 g/mol.

To calculate the molar mass of the gas, we can use the ideal gas law, PV=nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

We can rearrange this equation to solve for the number of moles:

n = PV/RT

We can then use the definition of density, d = m/V, where m is the mass, to solve for the mass of the gas:

m = dV

We can substitute these expressions into the equation for n:

n = (dV)P/RT

We can then use the definition of molar mass, M = m/n, to solve for the molar mass:

M = m/n = (dV)P/RT

Substituting the given values, we have:

M = (2.40 g/L)(0.820 atm)(22.4 L/mol)/(0.0821 L·atm/mol·K)(318 K) = 40.06 g/mol

To know more about molar mass, refer here:

https://brainly.com/question/22997914#

#SPJ11

4 moles of water (option b) are produced when 5 moles of hydrogen gas react with 2 moles of oxygen gas.

To determine how many moles of water are produced when 5 moles of hydrogen gas react with 2 moles of oxygen gas, you need to consider the balanced chemical equation for the reaction:

2H₂ (hydrogen) + O₂ (oxygen) → 2H₂O (water)

From the equation, you can see that 2 moles of hydrogen gas react with 1 mole of oxygen gas to produce 2 moles of water. To find out how many moles of water are produced in your scenario:

Step 1: Determine the limiting reactant. Hydrogen is present in excess (5 moles) compared to oxygen (2 moles). Oxygen will be the limiting reactant since it is present in a smaller amount.

Step 2: Calculate the moles of water produced using the stoichiometric ratios in the balanced equation. Since 1 mole of oxygen gas can produce 2 moles of water, 2 moles of oxygen gas will produce:

2 moles O₂ × (2 moles H₂O / 1 mole O₂) = 4 moles of water

Therefore, the answer is b. 4 moles of water are produced.

Learn more about oxygen at https://brainly.com/question/28009615

#SPJ11

Oxygen (O₂) is the limiting reactant, and the maximum mass of CO₂ that can be produced is 61.6 g.

To determine the limiting reactant and the amount of CO₂ produced, we need to perform a stoichiometric calculation using the balanced chemical equation;

C₃H₈ + 5O₂ → 3CO₂ + 4HO

First, we need to determine which reactant is limiting by calculating the amount of CO₂ that can be produced from each reactant and comparing them. We assume that both reactants are completely consumed in the reaction.

For C₃H₈;

Molar mass of C₃H₈ = 44.1 g/mol

Moles of C₃H₈ = 25.0 g / 44.1 g/mol = 0.567 mol

Moles of CO₂ produced = 0.567 mol x (3 mol CO₂ / 1 mol C₃H₈) = 1.70 mol

Mass of CO₂ produced = 1.70 mol x 44.01 g/mol = 74.8 g

For O₂ ;

Molar mass of  O₂ = 32.0 g/mol

Moles of  O₂  = 75.0 g / 32.0 g/mol = 2.34 mol

Moles of CO₂ produced = 2.34 mol x (3 mol CO₂ / 5 mol O₂ ) = 1.40 mol

Mass of CO₂ produced = 1.40 mol x 44.01 g/mol

= 61.6 g

Since O₂ produces less CO₂ than C₃H₈, it is the limiting reactant.

Therefore, the maximum mass of CO₂ that can be produced is 61.6 g.

To know more about limiting reactant here

https://brainly.com/question/19654705

#SPJ4

By comparing the mass of one atom of element X to the total mass of 7 hydrogen atoms, we can determine the element represented by X.

The mass of an atom is determined by the total number of protons, neutrons, and electrons in the atom. Protons and neutrons are located in the nucleus of an atom, while electrons are located in the electron cloud surrounding the nucleus.

To illustrate that the mass of an atom of element X is equivalent to the total mass of 7 hydrogen atoms, we first need to determine the mass of an atom of hydrogen and the mass of an atom of element X.

The mass of an atom of hydrogen is approximately 1 atomic mass unit (amu). Therefore, the total mass of 7 hydrogen atoms is 7 amu.

Now, let's assume that the mass of an atom of element X is also 7 amu. This means that the total number of protons, neutrons, and electrons in one atom of element X is equivalent to the total number in 7 hydrogen atoms.

Therefore, the element represented by X is nitrogen. The atomic mass of nitrogen is 14.007 amu, which is equivalent to the total mass of 7 hydrogen atoms.

In summary, the mass of an atom is determined by the total number of protons, neutrons, and electrons in the atom. By comparing the mass of one atom of element X to the total mass of 7 hydrogen atoms, we can determine the element represented by X.

To know more about hydrogen atoms, visit:

https://brainly.com/question/29695801#

#SPJ11

From the given information, we know that the parents are heterozygous, meaning they have two different alleles for the gene that controls coat color in their offspring. Let's use the following symbols to represent the alleles:

- B: the allele for black coat color

- b: the allele for white coat color

Since the offspring have a 25% chance of being black and a 25% chance of being white, we can assume that the parents are both heterozygous for the gene that controls coat color, which means they both have one B allele and one b allele. This is because:

- To be black, an offspring must inherit a B allele from each parent, so the parents must each have one B allele.

- To be white, an offspring must inherit a b allele from each parent, so the parents must each have one b allele.

The fact that the offspring also have a 50% chance of being speckled indicates that speckling is a result of incomplete dominance or co-dominance, where both alleles are expressed together.

Therefore, we can assume that the speckling phenotype is the result of both the B and b alleles being expressed together, rather than a third, intermediate allele.

In summary, based on the phenotype of their offspring, we can infer that the two parents are both heterozygous for the gene that controls coat color, with one B allele and one b allele each.

To know more about information refer here

https://brainly.com/question/30350623#

#SPJ11

The value of costant K at 234 K is 0.13.

What is the costant (K)?

To solve this problem, we can use the van 't Hoff equation:

ln(K2/K1) = -(ΔH°/R) * (1/T2 - 1/T1)

where K1 is the equilibrium constant at temperature T1, K2 is the equilibrium constant at temperature T2, ΔH° is the standard enthalpy change for the reaction, R is the gas constant, and T is the temperature in Kelvin.

We can rearrange this equation to solve for K2:

K2 = K1 * [tex]e^{(-(ΔH°/R)}[/tex] * (1/T2 - 1/T1))

Plugging in the given values, we get:

K1 = 10.5

T1 = 350 K

T2 = 234 K

ΔH° = -18.8 kJ/mol (be careful with the units!)

R = 8.314 J/(mol*K)

K2 = 10.5 * [tex]e^{(-(-18.810^3 J/mol)/(8.314 J/(molK)) * (1/234 K - 1/350 K))}[/tex]

K2 = 0.13

Therefore, the value of K at 234 K is 0.13.

What is equilibrium constant?

Equilibrium constant (K) is a thermodynamic constant that describes the ratio of the concentrations or pressures of reactants and products in a chemical reaction that has reached equilibrium at a given temperature and pressure. The value of K provides important information about the position of equilibrium and the relative amounts of reactants and products at equilibrium. If K is greater than 1, the reaction favors the products at equilibrium, whereas if K is less than 1, the reaction favors the reactants at equilibrium. If K is equal to 1, the reaction is at equilibrium and the concentrations or pressures of the reactants and products are equal.

To know more about equilibrium constant, visit:

https://brainly.com/question/14932239

#SPJ9

Hazel needs 0.6975 liters of water to make a 1.25M solution of Ni(NO₃)₂ using 45.7 grams of the solute.

To solve this problem, we need to use the formula:
Molarity (M) = moles of solute / liters of solution

First, we need to find the moles of nickel II nitrate:
moles = mass / molar mass

The molar mass of Ni(NO₃)₂ can be calculated by adding the molar masses of each element:
Ni: 58.69 g/mol
N: 14.01 g/mol
O (3 atoms): 3 x 16.00 g/mol = 48.00 g/mol

Total molar mass = 58.69 + 14.01 + 48.00 = 120.70 g/mol
So, the moles of Ni(NO₃)₂ used by Hazel is:
moles = 45.7 g / 120.70 g/mol = 0.3781 moles

Now, we can use the formula to find the volume of solution:

Molarity (M) = moles of solute / liters of solution
1.25 M = 0.3781 moles / liters of solution
Liters of solution = 0.3781 moles / 1.25 M = 0.3025 L

Therefore, the volume of water required to make the solution is:
Volume of water = Total volume - Volume of solute
Volume of water = 1 L - 0.3025 L = 0.6975 L

So, Hazel needs 0.6975 liters of water to make a 1.25M solution of Ni(NO₃)₂ using 45.7 grams of the solute.

To know more about Molarity :

https://brainly.com/question/19517011

#SPJ11