A system of equations has 1 solution. If 4x - y = 5 is one of the equations, which could be the other equation?
O y=-4x + 5
y = 4x-5
2y = 8x - 10
-2y = -8x - 10

Answer:

see below

Step-by-step explanation:

You could write it as 2+2+2+2+2 or 5+5 bc multiplication is like repeated addition.

Answer:

You can use the repeated additional as given below.

Step-by-step explanation:

2+2+2+2+2 or 5+5

Answer:

[tex] z=\frac{65-64.2}{\frac{2.84}{\sqrt{75}}} = 2.440[/tex]

And we can find the probability using the complement rule and with the normal standard table like this:

[tex] P(Z>2.440) =1-P(Z<2.440) = 1-0.993 =0.007[/tex]

The probability that the mean height for the sample is greater than 65 inches is 0.007

Step-by-step explanation:

Let X the random variable that represent the women heights of a population, and we know the following parameters

[tex]\mu=64.2[/tex] and [tex]\sigma=2.84[/tex]

We are interested on this probability

[tex]P(X>65)[/tex]

Since the sample size selected is 75>30 we can use the centrel limit theorem and the appropiate formula to use would be the z score given by:

[tex]z=\frac{x-\mu}{\frac{\sigma}{\sqrt{n}}}[/tex]

If we find the z score for 65 inches we got:

[tex] z=\frac{65-64.2}{\frac{2.84}{\sqrt{75}}} = 2.440[/tex]

And we can find the probability using the complement rule and with the normal standard table like this:

[tex] P(Z>2.440) =1-P(Z<2.440) = 1-0.993 =0.007[/tex]

The probability that the mean height for the sample is greater than 65 inches is 0.007

Answer:

a) P(X < 30) = 0.0392.

b) P(28 < X < 32) = 0.2760

c) P(X > 35) = 0.1190

d) P(X > 31) = 0.8810

e) At least 35.7965 mpg

Step-by-step explanation:

Problems of normally distributed samples are solved using the z-score formula.

In a set with mean [tex]\mu[/tex] and standard deviation [tex]\sigma[/tex], the zscore of a measure X is given by:

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

The Z-score measures how many standard deviations the measure is from the mean. After finding the Z-score, we look at the z-score table and find the p-value associated with this z-score. This p-value is the probability that the value of the measure is smaller than X, that is, the percentile of X. Subtracting 1 by the pvalue, we get the probability that the value of the measure is greater than X.

In this question, we have that:

[tex]\mu = 33, \sigma = 1.7[/tex]

a. P(X<30)

This is the pvalue of Z when X = 30. So

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

[tex]Z = \frac{30 - 33}{1.7}[/tex]

[tex]Z = -1.76[/tex]

[tex]Z = -1.76[/tex] has a pvalue of 0.0392.

Then

P(X < 30) = 0.0392.

b) P(28 < X < 32)

This is the pvalue of Z when X = 32 subtracted by the pvalue of Z when X = 28. So

X = 32

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

[tex]Z = \frac{32 - 33}{1.7}[/tex]

[tex]Z = -0.59[/tex]

[tex]Z = -0.59[/tex] has a pvalue of 0.2776.

X = 28

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

[tex]Z = \frac{28 - 33}{1.7}[/tex]

[tex]Z = -2.94[/tex]

[tex]Z = -2.94[/tex] has a pvalue of 0.0016.

0.2776 - 0.0016 = 0.2760.

So

P(28 < X < 32) = 0.2760

c) P(X>35)

This is 1 subtracted by the pvalue of Z when X = 35. So

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

[tex]Z = \frac{35 - 33}{1.7}[/tex]

[tex]Z = 1.18[/tex]

[tex]Z = 1.18[/tex] has a pvalue of 0.8810.

1 - 0.8810 = 0.1190

So

P(X > 35) = 0.1190

d. P(X>31)

This is 1 subtracted by the pvalue of Z when X = 31. So

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

[tex]Z = \frac{31 - 33}{1.7}[/tex]

[tex]Z = -1.18[/tex]

[tex]Z = -1.18[/tex] has a pvalue of 0.1190.

1 - 0.1190 = 0.8810

So

P(X > 31) = 0.8810

e. the mileage rating that the upper 5% of cars achieve.

At least the 95th percentile.

The 95th percentile is X when Z has a pvalue of 0.95. So it is X when Z = 1.645. Then

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

[tex]1.645 = \frac{X - 33}{1.7}[/tex]

[tex]X - 33 = 1.645*1.7[/tex]

[tex]X = 35.7965[/tex]

At least 35.7965 mpg

The upper 5% of cars have a mileage rating of 35.805 mpg

Z score is used to determine by how many standard deviations the raw score is above or below the mean. It is given by:

z = (raw score - mean) / standard deviation

Given;  mean of 33 mpg and a standard deviation of 1.7

a) For < 30:

z = (30 - 33)/1.7 = -1.76

P(x < 30) = P(z < -1.76) = 1 - 0.8413 = 0.0392

b) For < 28:

z = (28 - 33)/1.7 = -2.94

P(x < 28) = P(z < -2.94) = 0.0016

c) For > 35:

z = (35 - 33)/1.7 = 1.18

P(x > 35) = P(z > 1.18) = 1 - P(z < 1.18) = 1 - 0.8810 = 0.119

d) For > 31:

z = (31 - 33)/1.7 = -1.18

P(x > 31) = P(z > -1.18) = 1 - P(z < -1.18) = 0.8810

e) The  upper 5% of cars achieve have a z score of 1.65, hence:

1.65 = (x - 33)/1.7

x = 35.805 mpg

The upper 5% of cars have a mileage rating of 35.805 mpg

Find out more on z score at: https://brainly.com/question/25638875

Answer:

Age difference between oldest the  youngest = 48 years

Step-by-step explanation:

Given: Ratio of ages of Kissi and Esinam is 3:5, ratios of ages of Esinam and Lariba is 3:5 and sum of the ages of all 3 is 147 years

To find: age difference between oldest the  youngest

Solution:

Let age of Lariba be x years

As ratios of ages of Esinam and Lariba is 3:5,

Age of Esinam = [tex]\frac{3}{5}x[/tex]  years

As ratio of ages of Kissi and Esinam is 3:5,

Age of Kissi = [tex](\frac{3}{5}) (\frac{3}{5}x)=\frac{9}{25}x[/tex] years

Sum of the ages of all 3 = 147 years

[tex]x+\frac{3}{5}x+\frac{9}{25}x=147\\ \frac{25x+15x+9x}{25}=147\\ x=\frac{147(25)}{49}=75[/tex]

Age of Lariba = x = 75 years

Age of Esinam = [tex]\frac{3}{5}(75)=45\,\,years[/tex]

Age of Kissi = [tex]\frac{9}{25}(75)=27\,\,years[/tex]

So,

Age difference between oldest the  youngest = 75 - 27 = 48 years

Answer:

[tex]P(X<3) =[/tex] [tex]0.9619[/tex]

Step-by-step explanation:

From the given information;

the probability of getting returned p = 0.1

If eight rings are sold today, what is the probability that fewer than three will be returned;

According to binomial distribution

Binomial distribution is the probability of success or failure of an outcome of an experiment under observation which is usually repeated several trials. Binomial experiments are random experiment with fixed number of repeated experiment. If we cannot predict before head, the outcome of an experiment , the experiment is called a random experiment.

So , using binomial distribution to determine the probability that fewer than three will be returned;

i.e

[tex]P(X<3) =[/tex] [tex]\sum_{x=0}^{2}\binom{8}{x}(0.1)^{x}(1-0.1)^{8-x}[/tex]

[tex]P(X<3) =[/tex] [tex]0.9619[/tex]

Answer:

the radius

Step-by-step explanation:

the correct answer is the radius

Answer & Step-by-step explanation:

The triangle shown is an isosceles triangles. Isosceles triangles have a pair of congruent angles which are found at the bottom. These angles are called the base angles. So, when you find the measurement of one of the base angles, then the other base angle will have the same measurement.

We can find the measurement of x by subtracting 130 from 180. We are doing this because all triangles have a sum measurement of 180°. After we do this, then we will divide that number by 2 to find the measurement of x.

180 - 130 = 50

Now, we divide 50 by 2.

50 ÷ 2 = 25

So, the measurement of x is 25°.

Answer:

Step-by-step explanation:

[tex]r^{-7} +s^{-12} \\Use Negative Power Rule: x^{-a} =\frac{1}{x^{a} } \\r^{\frac{1}{7} } +s^{\frac{1}{12} } \\[/tex]

I hope i am correct

Answer:

{0, 1}

Step-by-step explanation:

Solving for 'x' in the inequality:

[tex]7x+3<17\\7x+3-3<17-3 \leftarrow \text{Subtraction Property of Equality}\\7x<14\\7x/7<14/7 \leftarrow \text{Division Property of Equality}\\\boxed{x<2}[/tex]

X's value has to be less than two to make the inequality true. So, {0, 1} should be the correct answer.

Answer:

I took the quiz and the answer is B

Step-by-step explanation:

Answer:

[tex]\fbox{\begin{minipage}{14em}Number of subsets: 16\\Number of proper subsets: 15\end{minipage}}[/tex]

Step-by-step explanation:

Given:

The set A = {5, 13, 17, 20}

Question:

Find the number of subsets of A

Find the number of proper subsets of A

Simple solution by counting:

Subset of A that has 0 element:

{∅} - 1 set

Subset of A that has 1 element:

{5}, {13}, {17}, {20} - 4 sets

Subset of A that has 2 elements:

{5, 13}, {5, 17}, {5, 20}, {13, 17}, {13, 20}, {17, 20} - 6 sets

Subset of A that has 3 elements:

{5, 13, 17}, {5, 13, 20}, {5, 17, 20}, {13, 17, 20} - 4 sets

Subset of A that has 4 elements:

{5, 13, 17, 20} - 1 set

In total, the number of subsets of A: N = 1 + 4 + 6 + 4 + 1 = 16

The number of proper subsets (all of subsets, except subset which is equal to original set A): N = 16 - 1 = 15

Key-point:

The counting method might be used for finding the number of subsets when the original set contains few elements.

The question is that, for a set that contains many elements, how to find out the number of subsets?

The answer is that: there is a fix formula to calculate the total number ([tex]N[/tex]) of subsets of a set containing [tex]n[/tex] elements: N = [tex]2^{n}[/tex]

With original set A = {5, 13, 17, 20}, there are 4 elements belonged to A.

=> Number of subsets of A: N = [tex]2^{4} = 16[/tex]

(same result as using counting method)

Brief proof of formula: N = [tex]2^{n}[/tex]

Each element of original set is considered in 2 status: existed or not.

If existed => fill that element in.

If not => leave empty.

For i.e.: empty subset means  that all elements are selected as not existed, subset with 1 element means that all elements are selected as not existed, except 1 element, ... and so on.

=> From the point of view of a permutation problem, for each element in original set, there are 2 ways to select: existed or not. There are [tex]n[/tex] elements in total. => There are [tex]2^n}[/tex] ways to select, or in other words, there are [tex]2^{n}[/tex] subsets.

Hope this helps!

:)

Answer:

a) Median amount of time that is spent is around 2.3, rounded to 2.

b) 4 unit time

c) Mean amount of time is bigger than the median.

Step-by-step explanation:

Find the given attachment.

Note: Complete Question, along with the diagram is added

Answer:

4/13

Step-by-step explanation:

There are 13 diamonds in a deck and 3 fours that aren't diamond

13+3=16

16/52 = 4/13

The right answer is (1/2 , 5)

please see the attached picture for full solution

Hope it helps

Good luck on your assignment

The correct question is:

A circle has a radius of 45 units and is centered at (-2.4, -4.8).

What is the equation of this circle?

Answer:

Equation of the circle is;

(x + 2.4)² + (y + 4.8)² = 2304

Step-by-step explanation:

The standard equation of a circle is;

(x - a)² + (y - b)²  =  r²

where;

(a,b) is the center of the circle and r is the radius of the circle

Now, from the question, the circle is centered at (-2.4, -4.8) and the radius is 45

Thus, plugging those values into the standard form of equation of a circle, we have;

(x - (-2.4))²  +  (y - (-4.8))²  = 48²

This gives;

(x + 2.4)² + (y + 4.8)² = 2304

Answer:

3 both ways x = 3

EXPLANATION:

plug in inputs and do a little simplifying we get

x = 6 ± √(36-36) all of that over 2

So we simplify and we get 6±sqrt(0) / 2

Then we get 6/2 = 3

x-0 = x+0

thats why there is only one answer

Answer:

The value of X is 3

Step-by-step explanation:

x²-6x+9=0

x²- 3x - 3x + 9= 0

X(x-3) -3(x-3)=0

(x-3) (x-3)=0

(x-3)²=0

(x-3)=0

x-3 = 0

X= 3

Answer:

D. ​Yes, because the frequencies start​ low, proceed to one or two high​ frequencies, then decrease to a low​ frequency, and the distribution is approximately symmetric.

Step-by-step explanation:

Hello!

The given frequency distribution for temperatures.

To see if the distribution appears to have a normal distribution you have to draw a histogram using the information. Check attachment.

As you can see, the distribution appears symmetric, it starts low and proceeds to grow until it reaches its maximum point (f(4)=13) and then starts to decrease to low frequencies. The right tail decreases a little more than the left one but it is almost symmetrical.

I hope this helps!

Answer:

b = 4.6 ft

h = 2.3 ft

Step-by-step explanation:

The volume of the tank is given by:

[tex]b^2*h=49[/tex]

Where 'b' is the length of the each side of the square base, and 'h' is the height of the tank.

The surface area can be written as:

[tex]A=b^2+4bh\\A=b^2+4b*({\frac{49}{b^2}})\\A=b^2+\frac{196}{b}[/tex]

The value of b for which the derivate of the expression above is zero is the value that yields the minimum surface area:

[tex]\frac{dA}{db} =0=2b-\frac{196}{b^2}\\2b^3=196\\b=4.61\ ft[/tex]

The value of h is then:

[tex]h=\frac{49}{4.61^2}\\h=2.31\ ft[/tex]

Rounded to the nearest tenth, the dimensions are b = 4.6 ft and h = 2.3 ft.

Answer:

The graph is shown below.

Step-by-step explanation:

The trigonometric expression is:

[tex]f(x)=sin\ (x)-5[/tex]

The general form is:

[tex]f(x)=a\ \text{sin}\ (bx-c)+d[/tex]

Comparing the two expression we know:

a = 1

b = 1

c = 0

d = -5

Compute the value of amplitude, |a | as follows:

[tex]\text{Amplitude}=|a|=|1|=1[/tex]

Compute the period of the function as follows:

[tex]\text{Period}=\frac{2\pi}{|b|}=\frac{2\pi}{|1|}=2\pi[/tex]

Compute the phase shift as follows:

[tex]\text{Phase Shift }=\frac{c}{b}=\frac{0}{1}=0[/tex]

The vertical shift is:

[tex]\text{Vertical Shift}=d=-5[/tex]

The properties of the trigonometric function are:

Amplitude = 1

Period = 2π

Phase shift = 0

Vertical shift = -5

Plot the graph of the trigonometric function by selecting a few points.

   x :  [tex]0[/tex]      [tex]\frac{\pi}{2}[/tex]     [tex]\pi[/tex]     [tex]\frac{3\pi}{2}[/tex]    [tex]2\pi[/tex]

f (x) : -5    -4    -5    -6    -5

The graph is shown below.

Answer:

Step-by-step explanation:

The question is incomplete. The missing data is:

30, 155, 205, 235, 180, 235, 70, 250, 135, 145, 225, 230, 30

Solution:

Mean = (30 + 155 + 205 + 235 + 180 + 235 + 70 + 250 + 135 + 145 + 225 + 230 + 30)/13 = 163.5

Standard deviation = √(summation(x - mean)²/n

n = 13

Summation(x - mean)² = (30 - 163.5)^2 + (155 - 163.5)^2 + (205 - 163.5)^2+ (235 - 163.5)^2 + (180 - 163.5)^2 + (235 - 163.5)^2 + (70 - 163.5)^2 + (250 - 163.5)^2 + (135 - 163.5)^2 + (145 - 163.5)^2 + (225 - 163.5)^2 + (230 - 163.5)^2 + (30 - 163.5)^2 = 73519.25

Standard deviation = √(73519.25/13) = 75.2

We would set up the hypothesis test. This is a test of a single population mean since we are dealing with mean

For the null hypothesis,

µ ≤ 150

For the alternative hypothesis,

µ > 150

It is a right tailed test.

a) Since the number of samples is small and no population standard deviation is given, the distribution is a student's t.

Since n = 13,

Degrees of freedom, df = n - 1 = 13 - 1 = 12

t = (x - µ)/(s/√n)

Where

x = sample mean = 163.5

µ = population mean = 150

s = samples standard deviation = 75.2

t = (163.5 - 150)/(75.2/√13) = 0.65

The lower the test statistic value, the higher the p value and the higher the possibility of accepting the null hypothesis.

b) We would determine the p value using the t test calculator. It becomes

p = 0.26

Since alpha, 0.05 < than the p value, 0.26, then we would fail to reject the null hypothesis. Therefore, At a 5% level of significance, the sample data does not show significant evidence that the mean number of friends for the student population at the college who use the social media website is larger than 150.

c)

1.The test statistic value is the difference between the sample mean and the null hypothesis value.

Answer:

: 4qrs • (qr2 + 2)

Step-by-step explanation:

Step by step solution :

Step 1 :

Equation at the end of step 1 :

((22q2 • r3) • s) + 8qrs

Pulling out like terms :

3.1 Pull out like factors :

4q2r3s + 8qrs = 4qrs • (qr2 + 2)

Final result :

4qrs • (qr2 + 2)

I am really soo sorry if the answer is wrong!

Answer:

# of pages   # of magazines

     1-20                    7

   21-40                    4

Step-by-step explanation:

Numbers 1 through 20:

10, 11, 14, 16, 17, 17, 20 (7 numbers)

Numbers 21 through 40:

21, 28, 29, 32 (4 numbers)

Answer:

[tex]20.25 \: m^2[/tex]

Step-by-step explanation:

Use the formula for the area of a square.

[tex]A=s^2[/tex]

Where [tex]s=4.5[/tex]

[tex]s^2\\(4.5)^2\\20.25[/tex]

The area of the square is 20.25 square meters as per the concept of the square.

To find the area of a square, we need to square the length of one of its sides. In this case, the side length is given as 4 1/2 meters.

First, we need to convert the mixed number 4 1/2 into an improper fraction. We can rewrite it as 9/2.

Next, we square the side length:

[tex]\frac{9}{2}^2 = \frac{81}{4}[/tex].

To simplify the fraction, we can divide the numerator by the denominator:

81 ÷ 4 = 20 remainders 1.

Therefore, the area of the square is 20 1/4 square meters.

However, we can simplify the mixed number further. Since 4 can be divided by 4 and 1 can be divided by 4, we have:

20 1/4

= 20 + 1/4

= 20 + 1/4

= 20 + 0.25

= 20.25.

Therefore, the area of the square is 20.25 square meters.

To learn more about the square;

https://brainly.com/question/28776767

#SPJ2

Answer:

hes lyin prolly

Step-by-step explanation:

Answer:

  0

Step-by-step explanation:

The x-axis corresponds to the line y = 0. All points on the x-axis have a y-value of zero.

Answer:

x= -19

Step-by-step explanation:

2x-4x-9=29

-2x=29+9

x=38/-2

= -19

Answer:

[tex]x=2-\sqrt{42}[/tex] and [tex]x=2+\sqrt{42} \\[/tex]

Step-by-step explanation:

Solve using the quadratic formula, which is [tex]x=\frac{-b + \sqrt{b^{2}-4ac }}{2a}[/tex] and [tex]x=\frac{-b-\sqrt{b^{2}-4ac } }{2a}[/tex]

I think just two reflections would do it.

First we reflect around y = -x, the 45 degree line through the origin and the second and fourth quadrant.

Then we reflect through the y axis, x=0.

The composition of the two reflections is equivalent to a 90 degree clockwise rotation.

Answer: No, it is not possible to get the same image as a 90-degree clockwise rotation using only translations and/or reflections. In the rotation, the x- and y-coordinates are switched. There is no way to reverse the order of the coordinates using only reflections or translations.

Step-by-step explanation:

ITS CORRECT. EDGE 2020

Answer:

a) 0.32 = 32% probability that your bid will be accepted

b) 0.72 = 72% probability that your bid will be accepted

c) An amount in excess of $15,400.

Step-by-step explanation:

An uniform probability is a case of probability in which each outcome is equally as likely.

For this situation, we have a lower limit of the distribution that we call a and an upper limit that we call b.

The probability that we find a value X lower than x is given by the following formula.

[tex]P(X \leq x) = \frac{x - a}{b-a}[/tex]

Assume that the competitor's bid x is a random variable that is uniformly distributed between $10,400 and $15,400.

This means that [tex]a = 10400, b = 15400[/tex]

a. Suppose you bid $12,000. What is the probability that your bid will be accepted (to 2 decimals)?

You will win if the competitor bids less than 12000. So

[tex]P(X \leq 12000) = \frac{12000 - 10400}{15400 - 10400} = 0.32[/tex]

0.32 = 32% probability that your bid will be accepted

b. Suppose you bid $14,000. What is the probability that your bid will be accepted?

You will win if the competitor bids less than 14000. So

[tex]P(X \leq 14000) = \frac{14000 - 10400}{15400 - 10400} = 0.72[/tex]

0.72 = 72% probability that your bid will be accepted

c. What amount should you bid to maximize the probability that you get the property (in dollars)?

His bid is uniformly distributed between $10,400 and $15,400.

So, to maximize the probability that you get the property, you should bid an amount in excess of $15,400.

Answer:

1) [tex] E(M) = 14*0.3 + 10*0.4 + 19*0.3 = 13.9 \%[/tex]

2) [tex]E(J)= 22*0.3 + 4*0.4 + 12*0.3 = 11.8 \%[/tex]

3) [tex] E(M^2) = 14^2*0.3 + 10^2*0.4 + 19^2*0.3 = 207.1 [/tex]

And the variance would be given by:

[tex]Var (M)= E(M^2) -[E(M)]^2 = 207.1 -(13.9^2)= 13.89[/tex]

And the deviation would be:

[tex] Sd(M) = \sqrt{13.89}= 3.73[/tex]

4) [tex] E(J^2) = 22^2*0.3 + 4^2*0.4 + 12^2*0.3 =194.8 [/tex]

And the variance would be given by:

[tex]Var (J)= E(J^2) -[E(J)]^2 = 194.8 -(11.8^2)= 55.56[/tex]

And the deviation would be:

[tex] Sd(M) = \sqrt{55.56}= 7.45[/tex]

Step-by-step explanation:

For this case we have the following distributions given:

Probability  M   J

0.3           14%  22%

0.4           10%    4%

0.3           19%    12%

Part 1

The expected value is given by this formula:

[tex] E(X)=\sum_{i=1}^n X_i P(X_i)[/tex]

And replacing we got:

[tex] E(M) = 14*0.3 + 10*0.4 + 19*0.3 = 13.9 \%[/tex]

Part 2

[tex]E(J)= 22*0.3 + 4*0.4 + 12*0.3 = 11.8 \%[/tex]

Part 3

We can calculate the second moment first with the following formula:

[tex] E(M^2) = 14^2*0.3 + 10^2*0.4 + 19^2*0.3 = 207.1 [/tex]

And the variance would be given by:

[tex]Var (M)= E(M^2) -[E(M)]^2 = 207.1 -(13.9^2)= 13.89[/tex]

And the deviation would be:

[tex] Sd(M) = \sqrt{13.89}= 3.73[/tex]

Part 4

We can calculate the second moment first with the following formula:

[tex] E(J^2) = 22^2*0.3 + 4^2*0.4 + 12^2*0.3 =194.8 [/tex]

And the variance would be given by:

[tex]Var (J)= E(J^2) -[E(J)]^2 = 194.8 -(11.8^2)= 55.56[/tex]

And the deviation would be:

[tex] Sd(M) = \sqrt{55.56}= 7.45[/tex]