a = v ² / R
where a is acceleration, v is speed, and R is the radius. So
7.5 m/s² = v ² / (1.2 m)
v ² = (7.5 m/s²) / (1.2 m)
v ≈ 6.8 m/s
Ignoring air resistance, if a 20 kg ball and a 400 kg crate were both dropped from the
top of a building, the acceleration of the crate would be
the acceleration
of the ball.
Five 6 ohm resistors are connected in parallel. Which of the following is their effective resistance?
A. 6 ohm
B. 1.2 ohm
C. 30 ohm
D. 5/6 ohm
1/Rt = 1/R1 + 1/R2 + 1/R3+ 1/R4+ 1/R5
1/Rt = 1/6+ 1/6+1/6+1/6+1/6
1/Rt = 5/6
Rt = 6/5
Rt = 1.2 ohm
so B is the answer
Earth, has a bigger mass than the Moon .
if you'll be able to go to the moon,
what happens to your weight?
PLEASE HELP ME!!!
Which of the following connect to the energy conversions that happen when you plug a vacuum into an electrical outlet and turn it on?
A.)kinetic, chemical, sound
B.)sound, nuclear, electrical
C.)chemical, nuclear, electrical
D.)sound, thermal, kinetic
Answer:
I think is B. sound, nuclear, electrical
but if I wrong then I am so sorry
Which is the process by which a solid changes to a liquid?
Answer:
melting.
Explanation:
The process in which a solid changes to a liquid is called melting. The melting point is the temperature at which a solid changes to a liquid.
Which of the following is not a factor that is required for the formation of hurricanes?
A: Very high winds in the upper atmosphere
B: Ocean temperatures of atleast 80 degrees F
C: Low winds in the upper atmosphere
D: Warm, moist air
Answer:
Either A or D
Explanation:
Answer:
c
Explanation:
its c because high winds foRM A HURRICAN AND WARM TO AND ESPECIALY IF IT IS 80 DEGRESES
A car is traveling down the highway cruise control at 50m/s (this means its is traveling with a constant velocity NOT accelerating). If it does this for 5 minutes (300s), how far does it travel?
Given parameters:
Speed of car = 50m/s
Time of travel = 5minutes (300s)
Unknown;
Distance of travel = ?
To solve this problem, we need to understand how speed relates with distance and time.
Speed is a physical quantity. It is the distance traveled divided by time taken.
Speed = [tex]\frac{distance}{time}[/tex]
So,
Distance = speed x time
Input the parameters and solve for the distance;
Distance = 50m/s x 300s
Distance = 15000m
The distance covered during this time interval and speed is 15000m
A batter hits the baseball A with an initial velocity of v0 = 100 ft/sec directly toward fi elder B at an angle of 30° to the horizontal; the initial position of the ball is 3 ft above ground level. Fielder B requires 14 sec to judge where the ball should be caught and begins moving to that position with constant speed. Because of great experience, fi elder B chooses his running speed so that he arrives at the "catch position" simultaneously with the baseball. The catch position is the fi eld location at which the ball altitude is 7 ft. Determine the velocity of the ball relative to the fi elder at the instant the catch is made.
Answer:
47.4 ft/s
Explanation:
Using v² = u² - 2gs where u = initial vertical velocity of ball = 100sin30, v = final vertical velocity of ball at the time it was caught by the fielder, g = acceleration due to gravity = 32 ft/s² and s = vertical displacement = y₂ - y₁, y₁ = 3 ft and y₂ = 7 ft. s = y₂ - y₁ = 7 - 3 = 4 ft
Substituting these values into the equation, we have
v² = u² - 2gs
v² = (100sin30)² - 2 × 32ft/s² × 4 ft
v² = (100sin30 ft/s)² - 256 ft²/s²
v² = (50 ft/s)² - 256 ft²/s²
v² = 2500 ft²/s² - 256 ft²/s²
v² = 2244 ft²/s²
v = √2244 ft²/s²
v = 47.37 ft/s
v ≅ 47.4 ft/s
So, the velocity of the ball relative to the fielder at the instant the catch is made is 47.4 ft/s.
Contact forces & friction. Please help!!! (20 points & brainliest!)
Let w denote the weight of the box, n the magnitude of the normal force (the sheet pushing up on the box), k the magnitude of the kinetic friction force, and µ the coefficient of kinetic friction.
The kinetic friction force doesn't kick in until the sheet is tilted at an angle θ₂. Since the box is sliding down at constant speed, it's in equilibrium and the forces acting on it sum to 0.
In the horizontal direction (literally left-and-right, parallel to the ground and not the sheet), we have only the horizontal components of the friction and normal forces to worry about, so that [tex]\mathbf n_x+\mathbf f_x=\mathbf0[/tex], which reduces to
f cos(θ₂) + n cos(90º + θ₂) = 0
(where we take the right to be positive and left to be negative)
Recall that cos(90º + x) = -sin(x) for all x, and that the friction force is proportional to the normal force by a factor of µ. This gives
µ n cos(θ₂) - n sin(θ₂) = 0
Solve for µ :
µ n cos(θ₂) = n sin(θ₂)
µ = sin(θ₂) / cos(θ₂)
µ = tan(θ₂)
If you know the answer please answer the following question down in the picture below.
How long does it take an airplane to fly 1200 miles if it maintains a speed of 300 miles per hour
Answer:
The answer is
4 hrsExplanation:
To find the time taken we use the formula
[tex]t = \frac{d}{v} \\ [/tex]
where
d is the distance covered
v is the velocity
t is the time
From the question
d = 1200 miles
v = 300 mi/hr
We have
[tex]t = \frac{1200}{300} = \frac{12}{3} \\ [/tex]
We have the final answer as
4 hrsHope this helps you
A car is moving at 18 m/s when it accelerates at 8 m/s2 for 2 sec. What is his new velocity ?
PLZ HELP!
The image here shows four soccer balls at four different locations on an uneven soccer field very near sea level. Which soccer ball has the greatest amount of potential energy?
Ball B
Ball C
Ball A
Ball D
Answer:
The answer is B.
Explanation:
Because that's the one that's more-so higher up than the other soccer balls. This grants the ball to have higher potential energy than the rest.
Quote:
"Your body is as weak as your soul, so it is easy to separate the two."
- Akuma
The ball b would have the greatest amount of the potential energy as the mass of each ball is the same then the ball on the highest altitude would have the greatest amount of the potential energy contained with it.
What is mechanical energy?Mechanical energy is the combination of all the energy in motion represented by total kinetic energy and the total stored energy in the system which is represented by total potential energy.
The mechanical energy = potential energy + kinetic energy
As given in the problem, the image here shows four soccer balls at four different locations on an uneven soccer field very near sea level.
The potential energy of the ball = mass×gravity×height
Since each ball's mass is the same, the ball at the highest altitude would have the most potential energy within it. As a result, ball b would have the greatest quantity of potential energy.
Thus,the correct answer is option A.
Learn more about mechanical energy from here, refer to the link;
brainly.com/question/12319302
#SPJ2
15 Points!!!
Fermentation of glucose by yeast produces
A) ethyl alcohol and carbon dioxide.
B) lactic acid and carbon dioxide.
C) lactic acid and oxygen.
D) ethyl alcohol and oxygen.
Answer:
A
Explanation:
Ethanol fermentation causes bread dough to rise. Yeast organisms consume sugars in the dough and produce ethanol and carbon dioxide as waste products. The carbon dioxide forms bubbles in the dough, expanding it to a foam.
Fermentation of glucose by yeast produces ethyl alcohol and carbon dioxide. (option a)
Fermentation is a metabolic process that occurs in yeast and some other microorganisms when they lack oxygen. During this process, glucose, a simple sugar, is broken down into simpler compounds. The main goal of fermentation is to produce energy for the cell without the need for oxygen.
Yeast, a type of fungus, carries out alcoholic fermentation. In this process, yeast breaks down glucose into two primary products: ethyl alcohol (also known as ethanol) and carbon dioxide. The equation representing this fermentation process is as follows:
Glucose → Ethyl Alcohol + Carbon Dioxide + Energy
The carbon dioxide produced during fermentation is responsible for the formation of bubbles in dough, which causes bread to rise. It is also the reason behind the effervescence in alcoholic beverages like beer and champagne.
So, the correct option is (a).
To know more about Fermentation here
https://brainly.com/question/31279960
#SPJ6
What is most occurring type of element on the periodic table?
Answer:
Hydrogen is the most abundant element in the Universe; helium is second. However, after this, the rank of abundance does not continue to correspond to the atomic number; oxygen has abundance rank 3, but atomic number 8. All others are substantially less common.
Explanation:
Which of the following is a unit of volume in the English system of measurement? (4 points)
Meters
Gallons
Liters per cubic gram
Kilograms per cubic centimeter
Answer:
Explanation:
the answer is gallons because i got it right on the exam
Which is a sedimentary rock?
A: cools down
B: has large crystals
C: forms in layers
D: is formed from pressure and heat
ANSWER ASAP!!!
Answer:
d. is formed from pressure and heat
Explanation:
it is formed from hot magam
look at the photo thank you
Answer: The ballon could get rub on a carpet to gain electricity and it would have enoght force
Explanation:
2
If the velocity of a bicycle is 10 m/s, how long will it take to cover a distance
of 18 km?
(Ans: 1800 s)
1800 sec = 30 min
Explanation:Hi there !
18km = 18×1000m = 18000 m
1 s ............... 10m
x s ...............18000m
x = 1×18000/10 = 1800 sec = 30 min
Good luck !
Acceleration
A car traveling to the right speeds up from Okm/h to 50km/h in 8s. Convert the time from seconds to minutes.
Explanation:
Initial speed, u = 0 km/h
Final sped, v = 50 km/h
Time, t = 8 s
1 minute = 60 seconds
⇒ 1 s = (1/60) minutes
⇒8 s = 0.1334 minutes
Acceleration,
[tex]a=\dfrac{v-u}{t}\\\\a=\dfrac{50\cdot\dfrac{5}{18}}{8}\\\\a=1.73\ m/s^2[/tex]
Hence, this is the required solution.
A 50kg boy stands on a horizontal rough ground. The coefficient with a static friction is 0.68. The maximum static friction between the boy and the ground is ?
Answer:333
Explanation:
RACTICE Uranium (molar mass = 283.03 g/mol) has the largest molar mass of any element naturally found on Earth. What is the mass of 7.50 mol of uranium?
Answer:
The answer is 2122.73 gExplanation:
The mass of a substance given it's molar mass and number of moles can be found by using the formula
mass = Molar mass × number of moles
From the question
molar mass = 283.03 g/mol
number of moles = 7.5 mol
So we have
mass = 283.03 × 7.5 = 2122.725
We have the final answer as
2122.73 gHope this helps you
a testable prediction about a possible to a problem is called a,
a: exercise
b: variable
c: hypothesis
d: experiment
Answer: C
A hypothesis is a testable explanation with some research behind it. An Hypothesis can be right or wrong.
The answer is C.
Hope it helps!
Answer:
c. is the answer but I'm not 100% sure
hypothesis
How does the approximate number of atoms
in the air in your lungs compare to the num-
ber of breaths of air in the atmosphere of the
whole world?
I don’t understand what this is asking...
If an element has an atomic number of 28, how many protons does it have in its nucleus?
The gravitational force of the Earth on the Moon is 1.99 x 1020 N.
If the mass of the Moon is 7.34 x 1022 kg, what is the acceleration
of the Moon?
Explanation:
ANSWER
g
m
=
R
2
GM
1.4=
R
2
(6.667×10
−11
)(7.34×10
22
)
R=
1.4
6.667×10
−11
(7.34×10
22
)
=
34.95×10
11
=1.87×10
6
m
HOPE IT'S HELP AND PLZ FOLLOW ME
Surfaces on the same body are assumed to experience meteorite impacts with the same frequency. If this is true, what could account for the stark contrast in impact crater density on bordering regions of Ganymede in the photo?
Answer:
The surface with fewer impact craters is a newer surface. It hasn’t been impacted as many times as the older surfaces
Explanation:
Sample Answer
Answer:
Newer surfaces are less damaged by impact craters, because they are less damaged by impact.
Explanation:
This is my answer.
A block slides to the right on a rough horizontal surface. The forces exerted on the block are shown above. Which of the following statements about the frictional force Ff exerted on the block is true?
A) It is the only force acting on the block that is caused by microscopic interactions.
B) It does not depend on the materials that the block and the surface are made of.
C) It is caused by gravitational interactions between the atoms in the block and the atoms in the surface.
D) It is the sum of all the microscopic contact forces between the bottom of the block and the surface.
Answer:
The correct option is;
A) It is the only force acting on the block that is causes by microscopic interactions
Explanation:
The force of friction is the force due to the relative motion of two surfaces in the presence of a perpendicular force acting between the surfaces.
The force of friction comes into play from the additional effect of the adhesion that is present between surfaces, the roughness of the surfaces, the contamination or deformation of the surfaces which is generated by the microscopic interactions be between the two surfaces, rather than the applied force.
The characteristics of the friction force, you can find which statements are correct:
D) It is the sum of all the microscopic contact forces between the bottom of the block and the surface.
The force is an image of the interactions between bodies, these interactions create binding energy that can be formed and broken, the friction force is the macroscopic sum of all these microscopic interactions between two different surfaces.
The magnitude of the friction force depends on the type of each surface, on rough surfaces the interaction area is high, therefore the friction force is high, on smooth surfaces the interaction area is small, therefore the force is small, a way to create superficiality is to place a layer of air between the two surfaces.
Based on these explanations, let's review the different statements:
A) False. The friction forces are caused by interaction, but between two bodies not within the same body, this is what maintains the shape and volume of the body.
B) False. The contact area depends on each surface and therefore each type of material
C) False. The gravitational force is this in the line of interaction between the two bodies, in this case the force is perpendicular to movement, not in the line of interaction.
D) True. It is the sum of the interactions in the contact between the two bodies, it agrees with the explanation above.
Using the characteristics of the friction force, we can find the statements that are correct is:
D) It is the sum of all the microscopic contact forces between the bottom of the block and the surface.
Learn more about friction force here: brainly.com/question/1714663
Determine the 3 standing waves for a 4 m length of rope.
Harmonics, Loop and Harmonic number
Hope this helps :)
Solve.
h ÷ 4 = 9
h =
