A student measured out 10. 0 mL of a 8. 0M sodium sulfide stock solution. The student then diluted the stock solution adding 20. 0 mL of distilled water. What is the concentration of the diluted solution?

The Snickers bar released 1,077,280 joules of energy when burned.

To calculate the energy released by burning a Snickers bar, we can use the formula:

q = mcΔT

where q is the heat energy released, m is the mass of water, c is the specific heat of water, and ΔT is the temperature change.

We know the mass of water is 3500 g, and the temperature change is 72°C. The specific heat of water is 4.184 J/g°C.

Therefore:

q = (3500 g) x (4.184 J/g°C) x (72°C) = 1077280 J

So, the Snickers bar released 1,077,280 joules of energy when burned.

To know more about temperature change refer here:

https://brainly.com/question/20531957

#SPJ11

A plant may go through a physiological response known as thermomorphogenesis in response to a heat stimulus. Option D.The plant grows tall. is correct.

This response may cause the plant to grow and develop in a variety of different ways, including enhanced stem elongation or modifications to the morphology of the leaves. As a result of enhanced stem elongation brought on by heat stress, plants can generally grow taller. This adaptation enables the plant to go away from the heat source and more easily absorb cooler air.

It is unusual for a plant to lose all of its leaves in response to a heat stimulation because this would mean a large loss of resources for the plant. Similar to how producing large fruit is not a usual reaction to heat stress, this is because the plant's energy resources might be diverted from reproduction to survival.

Heat stress may cause flowers to drop their petals, although this is not a universal reaction and would depend on the particular plant type and climatic factors.

For more such questions on Heat stress

https://brainly.com/question/10687398

Answer: Energy

Explanation:

Energy is the ability to do work or produce heat.

Ca +Br2 ---> CaBr2

2HNO3 + BaCl2 --->Ba(NO3)2 +2HCl

C7H16 + 11O2 → 7CO2 + 8H2O

Cl2 + 2KI --->2KCl + I2

No reaction

2Na3PO4 + 3Mg(NO3)2 → Mg3(PO4)2 + 6NaNO3

2Al + 3ZnCl2 → 3Zn + 2AlCl3

Li(OH) (ag) + HCI (aq) —>LiCl + H2O

2Na + 2H2O → 2NaOH + H2

The burning splint would make a "pop" sound.

A balanced equation is a chemical equation that has an equal number of atoms of each element on both the reactant and product sides.

In other words, a balanced equation follows the law of conservation of mass, which states that the total mass of the reactants must equal the total mass of the products in a chemical reaction.

Learn more about balanced equation:https://brainly.com/question/7181548

#SPJ1

The molarity of a solution is defined as the number of moles of solute dissolved in one liter of solution. To calculate the molarity of the NaOH solution, we need to divide the number of moles of NaOH by the volume of the solution in liters.

Given that 15 moles of NaOH are dissolved in 2.0 L of solution, the molarity (M) of the solution can be calculated as:

M = number of moles of solute / volume of solution in liters

M = 15 moles / 2.0 L

M = 7.5 M

Therefore, the molarity of the NaOH solution is 7.5 M.

To know more about molarity refer here

https://brainly.com/question/31545539#

#SPJ11

For question 3, we can use the relationship pH + pOH = 14 to solve for the pH, which is 1.96.

Then, we can use the equation Kw = [[H₃O⁺][OH⁻] = 1.0 x 10⁻¹⁴ to solve for the hydronium concentration, which is 5.01 x 10⁻¹³ M.

For question 4, we can use the equation for the acid dissociation constant (Ka) to solve for the concentration of the conjugate base, F-. Ka = [H₃O⁺][F⁻]/[HF].

We know the concentration of HF is 2.5 moles, so we can convert this to molarity using the volume of the solution. Then, we can plug in the values we have and solve for [F-], which is 2.77 M. This solution will be acidic, as the Ka value is less than 1.

To know more about acid dissociation constant click on below link:

https://brainly.com/question/4363472#

#SPJ11

Magnesium chloride and silver nitrate react in aqueous solution when they come into contact with each other. In other words, they need to be dissolved in water for the reaction to occur. This is because both compounds are ionic and require a medium for their ions to interact and exchange. Therefore, the condition for the reaction between magnesium chloride and silver nitrate is an aqueous solution.

Magnesium chloride (MgCl₂) and silver nitrate (AgNO₃) react in an aqueous solution. The condition required for the reaction to occur is that both substances are dissolved in water. When this condition is met, a double displacement reaction takes place, leading to the formation of silver chloride (AgCl) precipitate and magnesium nitrate (Mg(NO₃)₂) in the solution. The reaction can be represented by the following balanced equation:

MgCl₂ (aq) + 2AgNO₃ (aq) → 2AgCl (s) + Mg(NO₃)₂ (aq)

1. Dissolve magnesium chloride (MgCl₂) and silver nitrate (AgNO₃) in water to create aqueous solutions.
2. Mix the two aqueous solutions together.
3. Observe the formation of silver chloride (AgCl) precipitate and magnesium nitrate (Mg(NO₃)₂) in solution as a result of the double displacement reaction.

Learn more about Magnesium chloride at https://brainly.com/question/26227142

#SPJ11

The final temperature of an 89.6 gram sample of aluminum is calculated to be 30.6°C after 450.5 calories of heat energy is added, given that the specific heat of aluminum is 0.215 calories per gram degree Celsius and the initial temperature is 25.7°C.

To solve this problem, we can use the formula:

Q = m x c x ΔT

where Q is the amount of heat energy added, m is the mass of the sample, c is the specific heat of the material, and ΔT is the change in temperature.

We are given Q = 450.5 calories, m = 89.6 grams, c = 0.215 calories per gram degree Celsius, and the initial temperature of the sample T1 = 25.7°C.

Let's assume that the final temperature of the sample is T2. Therefore, we can write:

Q = m x c x (T2 - T1)

Solving for T2, we get:

T2 = (Q/mc) + T1

Substituting the given values, we get:

T2 = (450.5 calories)/(89.6 grams x 0.215 calories per gram degree Celsius) + 25.7°C

T2 = 30.6°C

Therefore, the final temperature of the sample is 30.6°C.

To know more about the specific heat refer here :

https://brainly.com/question/11297584#

#SPJ11  

The ratio of NH₃ to O₂ is less than 4:7, it means that NH₃ is the limiting reagent. Therefore, NH₃ will be completely consumed before O₂ and the amount of product formed will be determined by the amount of NH₃ available.

To determine the limiting reagent, we need to compare the amount of each reactant with their respective stoichiometric coefficients in the balanced chemical equation.

First, we convert the given masses of NH₃ and O₂ to moles using their molar masses:

58.3 g NH₃ × (1 mol NH₃ ÷ 17.03 g NH₃) = 3.42 mol NH₃

126 g O₂ × (1 mol O₂ ÷ 32 g O₂) = 3.94 mol O₂

Next, we compare the number of moles of NH₃ and O₂ to the stoichiometric coefficients in the balanced equation:

NH₃ : O₂ ratio = 4:7

To learn more about reagent follow the link:

brainly.com/question/26905271

#SPJ4

The percent yield of CO2 in the decomposition reaction of calcium carbonate is 96.20%.

The decomposition reaction of calcium carbonate (CaCO3) is represented by the balanced equation:

CaCO3(s) --> CaO(s) + CO2(g)

To calculate the percent yield of CO2 from a 15.8-g sample of calcium carbonate that decomposed, leaving a solid mass of 9.10 g, follow these steps:

1. Determine the molar mass of CaCO3, CaO, and CO2.
- CaCO3: (40.08 + 12.01 + 3*16.00) = 100.09 g/mol
- CaO: (40.08 + 16.00) = 56.08 g/mol
- CO2: (12.01 + 2*16.00) = 44.01 g/mol

2. Calculate the theoretical amount of CO2 produced by the complete decomposition of 15.8 g of CaCO3.
- moles of CaCO3: (15.8 g) / (100.09 g/mol) = 0.158 mol
- moles of CO2 produced: 0.158 mol (1:1 ratio with CaCO3)
- mass of CO2: (0.158 mol) * (44.01 g/mol) = 6.95 g

3. Calculate the actual amount of CO2 produced based on the remaining solid mass.
- mass of CaO and unreacted CaCO3: 9.10 g
- mass of CaCO3 in the remaining solid: 15.8 g - 9.10 g = 6.70 g
- moles of CO2 actually produced: (6.70 g) / (44.01 g/mol) = 0.152 mol

4. Calculate the percent yield of CO2.
- percent yield: (actual moles of CO2 / theoretical moles of CO2) * 100
- percent yield: (0.152 mol / 0.158 mol) * 100 = 96.20%

The percent yield of CO2 in the decomposition reaction of calcium carbonate is 96.20%.

To know more about decomposition reaction, visit:

https://brainly.com/question/16987748#

#SPJ11

To predict the molecular geometry of these molecules using the VSEPR theory, we first need to draw the Lewis structure for each molecule:

1. HI

Lewis structure: H-I (single bond)

The central atom (Iodine) has 7 valence electrons, and each hydrogen atom contributes 1 valence electron. Therefore, the total valence electrons in the molecule is 9.

Steric number = number of lone pairs of electrons + number of atoms bonded to central atom = 0 + 1 = 1

Molecular geometry: linear

2. CBr4

Lewis structure:

:Br-C-Br:

: | :

:Br-C-Br:

The central atom (Carbon) has 4 valence electrons, and each Bromine atom contributes 7 valence electrons. Therefore, the total valence electrons in the molecule is 32.

Steric number = number of lone pairs of electrons + number of atoms bonded to central atom = 0 + 4 = 4

Molecular geometry: tetrahedral

3. CH2Cl2

Lewis structure:

H : Cl

| :

H-C-H

| :

Cl:

The central atom (Carbon) has 4 valence electrons, each hydrogen atom contributes 1 valence electron, and each chlorine atom contributes 7 valence electrons. Therefore, the total valence electrons in the molecule is 20.

Steric number = number of lone pairs of electrons + number of atoms bonded to central atom = 2 + 4 = 6

Molecular geometry: octahedral

However, the two lone pairs of electrons on the central atom will repel the bonded pairs more than the bonded pairs will repel each other. Therefore, the shape will be bent or V-shaped.

4. SF2

Lewis structure:

F : S : F

\ /

F

The central atom (Sulfur) has 6 valence electrons, each Fluorine atom contributes 7 valence electrons. Therefore, the total valence electrons in the molecule is 20.

Steric number = number of lone pairs of electrons + number of atoms bonded to central atom = 1 + 2 = 3

Molecular geometry: trigonal planar

However, the lone pair of electrons on the central atom will repel the bonded pairs more than the bonded pairs will repel each other. Therefore, the shape will be bent or V-shaped.

5. PCl3

Lewis structure:

Cl : P : Cl

:

Cl

The central atom (Phosphorus) has 5 valence electrons, each Chlorine atom contributes 7 valence electrons. Therefore, the total valence electrons in the molecule is 26.

Steric number = number of lone pairs of electrons + number of atoms bonded to central atom = 0 + 3 = 3

Molecular geometry: trigonal planar

To know more about VSEPR theory refer to-

https://brainly.com/question/14992767

#SPJ11

H2O, or water, is a molecular compound that is a liquid at room temperature (22 degrees Celsius). This state is primarily due to the fact that it has relatively strong intermolecular forces.

These forces are the attractive forces between the molecules of the compound, and in the case of water, these forces are called hydrogen bonds.

Hydrogen bonds are a type of dipole-dipole interaction that occurs between molecules containing a hydrogen atom bonded to a highly electronegative element, such as oxygen in water. The oxygen atom attracts the electrons in the bond, creating a partial negative charge on the oxygen and a partial positive charge on the hydrogen.

This causes an electrostatic attraction between the partially positive hydrogen atom and the partially negative oxygen atom of a neighboring water molecule.

These hydrogen bonds give water its unique properties, such as its relatively high boiling and melting points compared to other molecular compounds with similar molecular weights.

The strong intermolecular forces provided by hydrogen bonding are what make water a liquid at room temperature, as they are strong enough to hold the molecules together, but not so strong that they form a solid at this temperature.

To know more about H2O, visit:

https://brainly.com/question/13278693#

#SPJ11

The weight/volume percent concentration of the diluted solution is 15%.

The initial solution is a 30.0% (w/v) solution, which means that 30.0 grams of vitamin C is dissolved in 100 mL of the solution. Therefore, the amount of vitamin C in the initial solution is:

30.0% (w/v) = 30.0 g / 100 mL = 0.3 g/mL

The initial solution is then diluted to a final volume of 200 mL. Since the amount of vitamin C in the solution remains constant, we can use the following equation to calculate the final concentration:

CiVi = CfVf

where Ci and Vi are the initial concentration and volume, and Cf and Vf are the final concentration and volume.

We can rearrange the equation to solve for the final concentration:

Cf = (CiVi) / Vf

Substituting the values, we get:

Cf = (0.3 g/mL x 100 mL) / 200 mL

Cf = 0.15 g/mL

Finally, we can convert the concentration to weight/volume percent by multiplying by 100:

weight/volume percent = Cf x 100%

weight/volume percent = 0.15 g/mL x 100%

weight/volume percent = 15%

To know more about vitamin C refer to-

https://brainly.com/question/15080220

#SPJ11

According to the question the two results of the uneven heating of Earth's surface are ocean currents and global winds.

Currents are electrical energy that flows through a circuit. They are typically measured in amperes (amps), and they result from the flow of electrons through the circuit. Currents can be either direct or alternating, and they are used to power many electrical appliances and power systems. Direct currents are generated from sources such as batteries, while alternating currents are produced by generators and power plants. Currents can also be generated artificially, using devices such as transformers, or naturally, through processes such as lightning. The magnitude of currents depends on the voltage and resistance of the circuit. Currents can be used to control the operation of many electrical circuits and components, such as motors, relays, and switches. They can also be used to provide power for many electrical devices, including lights, computers, and other electronic equipment.

To learn more about currents

https://brainly.com/question/31593608

#SPJ4

In this problem, we are given the volume of a gas collected over water at a certain temperature and pressure. We need to determine the volume of the dry gas at STP (standard temperature and pressure).

First, we need to understand why the presence of water is important in this problem. When a gas is collected over water, some of the water vapor dissolves in the gas, which affects the volume of the gas we measure. In order to account for this, we need to use the concept of vapor pressure.

The vapor pressure of water at 22.0°C is 2.64 kPa. This means that at 22.0°C and 98.0 kPa, the total pressure is the sum of the pressure due to the gas and the pressure due to the water vapor. We can use Dalton's Law of Partial Pressures to calculate the pressure due to the gas alone:

P_gas = P_total - P_water vapor
P_gas = 98.0 kPa - 2.64 kPa
P_gas = 95.36 kPa

Now we can use the Ideal Gas Law to calculate the volume of the dry gas at STP:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. At STP, P = 101.3 kPa and T = 273.15 K.

We can rearrange the Ideal Gas Law to solve for the volume of the dry gas:

V_dry gas = (V_collected gas * P_gas * T_STP) / (P_STP * T_collected gas)

where V_collected gas is the volume of the gas collected over water, T_collected gas is the temperature of the gas collected over water, and T_STP is the temperature at STP.

Plugging in the numbers, we get:

V_dry gas = (1.85 L * 95.36 kPa * 273.15 K) / (101.3 kPa * 295.15 K)
V_dry gas = 1.60 L

Therefore, the volume of the dry gas at STP is 1.60 L. It's important to note that the volume of the dry gas is smaller than the volume of the gas collected over water, because some of the volume was occupied by water vapor.

To know more about STP refer here

https://brainly.com/question/24050436#

#SPJ11

When given 20.76 moles of H2 and plenty of O2, you can make 20.76 moles of H2O.

To determine how many moles of H2O can be produced from 20.76 moles of H2 and plenty of O2, we'll use the balanced chemical equation provided: 2H2 + 1O2 --> 2H2O.

Step 1: Identify the limiting reactant. In this case, we have plenty of O2, so H2 is the limiting reactant.

Step 2: Determine the mole ratio between the limiting reactant (H2) and the product (H2O). According to the balanced equation, the mole ratio is 2H2 to 2H2O, or 1:1.

Step 3: Calculate the moles of H2O produced. Since the mole ratio is 1:1, the number of moles of H2O produced will be the same as the number of moles of H2 available. Thus, you can produce 20.76 moles of H2O.

In summary, when given 20.76 moles of H2 and plenty of O2, you can make 20.76 moles of H2O.

To know more about moles, visit:

https://brainly.com/question/31597231#

#SPJ11

The gas occupies a volume of approximately 28.18 liters at a temperature of 28°C and a pressure of 1.631 atm

To determine the volume the gas occupies at a temperature of 28°C and a pressure of 1.631 atm, we will use the Ideal Gas Law, which is defined as PV = nRT. In this equation, P represents pressure, V represents volume, n represents the number of moles of the gas, R is the ideal gas constant, and T is the temperature in Kelvin.

First, we need to convert the temperature from Celsius to Kelvin: T(K) = T(°C) + 273.15. In this case, T(K) = 28 + 273.15 = 301.15 K.

Now, we can use the Ideal Gas Law to find the volume of the gas. The ideal gas constant (R) is 0.0821 L atm/mol K. Therefore, we have:

1.631 atm (V) = 3 moles (0.0821 L atm/mol K) (301.15 K)

To find the volume (V), we can rearrange the equation and isolate V:

V = (3 moles * 0.0821 L atm/mol K * 301.15 K) / 1.631 atm

V = 45.98271 L/mol / 1.631 atm

V ≈ 28.18 L

So, the gas occupies a volume of approximately 28.18 liters at a temperature of 28°C and a pressure of 1.631 atm.

To know more about temperature, visit:

https://brainly.com/question/29133754#

#SPJ11

In order to respond to this query, it is necessary to first define a saturated solution. When a solution reaches its maximal solubility, no more solute can dissolve in the solvent, creating a saturated solution.

Potassium iodide is the solute in this scenario, while water is the solvent. Potassium iodide is most soluble in water at a temperature of around 74.2 grammes per 100 grammes of water.

We must thus add 19.2 additional grammes of KI to the solution in order to make it saturated. This implies that there would be 74.2 grammes of KI in the entire solution.

Learn more about KI   at:

https://brainly.com/question/30033275

#SPJ1

The matchup are:

Acid with the highest electrical conductivity:

Acid which could also be a base according to the Modified Arrhenius Theory:

Note:  H2O(aq) is amphoteric, meaning it can act as an acid or a base according to the Modified Arrhenius Theory. H2CO3(aq) is a polyprotic acid, meaning it can donate multiple protons in a stepwise manner. HCOOH(aq) has a very low ionization constant, meaning it ionizes at a very slow rate compared to other acids.

Read more about acids here:

https://brainly.com/question/25148363

#SPJ1

Answer:

According to the data supplied, the reaction of baking soda and vinegar is exothermic. Exothermic reactions transfer energy from the system to the environment, often in the form of heat. The beginning temperature of the vinegar was 25 degrees Celsius, and the ultimate temperature of the reaction was 19 degrees Celsius, indicating that heat was released into the environment. This is consistent with an exothermic process, in which energy is released and transmitted to the surroundings. As a result of the chemical interaction between baking soda and vinegar, carbon dioxide gas is created, and heat is emitted.

pH = 6.00: 0, 1, 2, 3, 4, 5 will not precipitate.

pH = 8.00: 0, 1, 2, 3, 4, 5 will not precipitate.

To determine the pH at which Cu(OH)₂ begins to precipitate, we need to calculate the hydroxide ion concentration at which the product of [Cu²⁺] and [OH⁻]² reaches the Ksp value of Cu(OH)₂ (2.2e⁻²⁰). At this point, Cu(OH)₂ will begin to precipitate. Thus, we have:

Therefore, Cu(OH)₂ begins to precipitate at a pH of 6.3.

To learn more about precipitate, here

https://brainly.com/question/31046678

#SPJ4

Answer:

Niobium (Columbium)

Explanation:

Specific heat capacity has the units J/(kg °C). To find the heat capacity, all we need to do is organize the values so the units match up.

1200 J / (0.03 kg * 150°C) = 266.67 or 267 J/(kg °C)

The closest metal to a 267 heat capacity is Niobium I believe.

197.4 grams of oxygen gas is consumed during the combustion of propane. Using stoichiometry, it is calculated that 88.43 grams of water vapor is produced as a result.

The balanced chemical equation for the combustion of propane is:

C₃H₈ + 5O₂ → 3CO₂ + 4H₂O

From the equation, we can see that for every mole of propane (C₃H₈) consumed, 4 moles of water (H₂O) are produced.

To solve the problem, we need to first find the number of moles of oxygen (O₂) consumed:

Moles of O₂ = Mass of O₂ / Molar mass of O₂

Molar mass of O₂ = 32 g/mol (from the periodic table)

Moles of O₂ = 197.4 g / 32 g/mol

Moles of O₂ = 6.16875 mol

Since the balanced chemical equation shows that 5 moles of O₂ are required for every mole of C₃H₈, we can find the number of moles of C₃H₈ consumed:

Moles of C₃H₈ = Moles of O₂ / 5

Moles of C₃H₈ = 6.16875 mol / 5

Moles of C₃H₈ = 1.23375 mol

Now, we can find the number of moles of H₂O produced:

Moles of H₂O = Moles of C₃H₈ x 4

Moles of H₂O = 1.23375 mol x 4

Moles of H₂O = 4.935 mol

Finally, we can find the mass of H₂O produced:

Mass of H₂O = Moles of H₂O x Molar mass of H₂O

Molar mass of H₂O = 18 g/mol (from the periodic table)

Mass of H₂O = 4.935 mol x 18 g/mol

Mass of H₂O = 88.43 g

Therefore, 88.43 grams of water vapor is produced as a result of the combustion of propane with 197.4 grams of oxygen gas.

To know more about the combustion refer here :

https://brainly.com/question/31123826#

#SPJ11

Starting with 100 molecules of the first limiting reagent, the maximum number of product molecules that can be formed at the end of the final reaction, given the yields of each reaction, is 11 molecules.

Let's call the starting number of molecules of the first limiting reagent "A". Then, the number of molecules of each reactant and product after each reaction can be represented as follows,

Reaction 1: A → B (80% yield)

Starting molecules of A = 100

Molecules of B produced = 80

Reaction 2: B → C (90% yield)

Starting molecules of B = 80

Molecules of C produced = 72

Reaction 3: C → D (65% yield)

Starting molecules of C = 72

Molecules of D produced = 46.8 (rounded to 47)

Reaction 4: D → E (76% yield)

Starting molecules of D = 47

Molecules of E produced = 35.72 (rounded to 36)

Reaction 5: E → F (30% yield)

Starting molecules of E = 36

Molecules of F produced = 10.8 (rounded to 11)

Therefore, the maximum number of product molecules that can be formed at the end of the final reaction is 11, rounded to the nearest whole number.

To know more about reaction, here

brainly.com/question/30392167

#SPJ4

By considering the solubility rules, we can determine whether a precipitate will form and its empirical formula when mixing two aqueous solutions.

The table can be completed as follows(image attached):

To determine whether a precipitate will form when solutions A and B are mixed, we need to consider the solubility rules of the compounds involved. If the product of the ions in the solution is insoluble, then a precipitate will form.

In the first case, potassium sulfide (K2S) and iron(II) sulfate (FeSO4) will react to form potassium sulfate (K2SO4) and iron(II) sulfide (FeS), which is insoluble. Thus, a precipitate will form with empirical formula FeS. In the second case, both zinc sulfate (ZnSO4) and iron(II) bromide (FeBr2) are soluble in water and will not react to form an insoluble compound. Therefore, no precipitate will form.

In the third case, barium bromide (BaBr2) and potassium acetate (KC2H3O2) will react to form barium acetate (Ba(C2H3O2)2) and potassium bromide (KBr), which is soluble. However, barium acetate is insoluble and will form a precipitate with empirical formula Ba(C2H3O2)2.

To know more about the Aqueous solutions, here

https://brainly.com/question/29987702

#SPJ4

Ans.1

blank 1 =1

blank 2 = 3

blank 3 = 2

Ans.2

blank 1 = 6

blank 2 = 4

blank 3 = 5

Ans.

blank 1 = 11

blank 2 =  7

blank 3 = 8

Based on the rate law, the equivalent expression to d[NO₂]/dt is -2k[O₃][NO₂]; option B.

A rate law gives a mathematical explanation of how variations in a substance's amount affect the rate of a chemical reaction.

To determine the equivalent expression to d[NO₂]/dt, differentiate the rate law with respect to [NO₂].

d/dt[k[O₃][NO₂]] = k[d[O₃]/dt][NO₂] + k[O₃][d[NO₂]/dt]

We assume d[O₃]/dt is a constant = k1 (since it is not given in the rate law)

The coefficient for NO₂ is -2,

Substituting in the equation above:

d[NO₂]/dt = (-2k/k1)[O₃][NO₂]

d[NO₂]/dt = -2k[O₃][NO₂]/k1

Learn more about rate law at: https://brainly.com/question/16981791

#SPJ1

Approximately 13.3 mL of 3.00 M H₂SO₄ is required to prepare 200. mL of 0.200 N H₂SO₄.

To calculate the volume of 3.00 M H₂SO₄ required to prepare 200. mL of 0.200 N H₂SO₄, we can use the formula for molarity:

Molarity (M) = moles of solute / volume of solution in liters

We can rearrange this formula to solve for volume:

Volume (in liters) = moles of solute / molarity

First, let's calculate the moles of H₂SO₄ in 200. mL of 0.200 N solution:

0.200 N = 0.200 mol/L

Moles of H₂SO₄ = 0.200 mol/L x 0.200 L = 0.0400 mol

Next, we can use this value and the concentration of the 3.00 M H₂SO₄ to calculate the volume of the concentrated acid needed:

Volume = moles of solute / molarity

Volume = 0.0400 mol / 3.00 mol/L

Volume = 0.0133 L or 13.3 mL

So, to make 200 mL of 0.200 N H₂SO₄ , roughly 13.3 mL of 3.00 M H₂SO₄  is required.

To know more about the Volume, here

https://brainly.com/question/31482457

#SPJ4

The energy of a photon that emits a light of frequency 6. 42 x 1014 Hz is 4.25 x 10^-19 J.

The energy of a photon can be calculated using the equation:

E=hf,

where E is the energy of the photon, h is Planck's constant (6.626 x 10^-34 J.s), and f is the frequency of the light emitted by the photon.

Plugging in the given frequency of 6.42 x 10^14 Hz into the equation, we get

E=(6.626 x 10^-34 J.s)(6.42 x 10^14 Hz) = 4.25 x 10^-19 J.

Therefore, the correct answer is B i.e, 4.25 x 10^-19 J.

It should be emphasized that a photon's energy is directly linked to its frequency and inversely related to its wavelength. Therefore, light with higher frequency, such as blue light, contains more energy than light with lower frequency, such as red light.

Know more about Energy here:

https://brainly.com/question/1932868

#SPJ11

To calculate the number of moles of nitrogen required to fill the airbag, we need to use the ideal gas law.

We know the temperature of the nitrogen gas produced by the chemical reaction, which is 495°C, and we assume that it behaves like an ideal gas.

We also know the volume of the airbag, which we can use to calculate the number of moles of nitrogen using the ideal gas law equation PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is temperature.

Once we have calculated the number of moles of nitrogen required, we can move on to part C of the question, which asks us to calculate the mass of sodium azide required to produce that amount of nitrogen.

To do this, we need to refer to the balanced chemical equation given in part B and use the atomic weights from the periodic table to calculate the mass of sodium azide needed.

To know more about ideal gas law click on below link:

https://brainly.com/question/28257995#

#SPJ11