A student added copper wire to a flask containing silver nitrate after a period of three hours,the flask and its contents looked like this Did a chemical reaction occur? Use evidence and scientific reasoning to support your claim

Answer: The rate increases 3 times on raising the temperature from 20degree to 30 degree​

Explanation:

According to Arrhenius equation with change in temperature, the formula is as follows.

[tex]ln \frac{k_{2}}{k_{1}} = \frac{-E_{a}}{R}[\frac{1}{T_{2}} - \frac{1}{T_{1}}][/tex]

where [tex]k_2[/tex] = rate constant at temp [tex]T_2[/tex]

[tex]k_1[/tex] = rate constant at temp [tex]T_1[/tex]

[tex]E_a[/tex]= activation energy

R= gas constant

[tex]T_1[/tex]= temperature = [tex]20^0C=(20+273)K=293K[/tex]

[tex]T_2[/tex]= temperature = [tex]30^0C=(30+273)K=303K[/tex]

[tex]ln \frac{k_{2}}{k_{1}} = \frac{-85\times 1000J/mol}{8.314J/Kmol}[\frac{1}{303} - \frac{1}{293}][/tex]

[tex]ln \frac{k_{2}}{k_{1}}=1.15[/tex]

[tex]\frac{k_{2}}{k_{1}}=3[/tex]

Thus rate increases 3 times on raising the temperature from 20degree to 30 degree​

Explanation:

This is cause of b) Static Electricity

It is also called Electrostatic force combined together.

Hope it helps ya :)

Answer:

1.4 M

Explanation:

n(HBr)=3.115/81

so, 3.115/81=0.0385mol

according to the reaction, n(HBr)=n(KOH)=0.038 mol

C(KOH)=n/V=0.0385/0.02745

0.0385/0.02745 =1.4 M

in short the answer is 1.4 M (molarity)

.Answer:

2kclo3 --> 2kcl + 3o2 is a decomposition reaction because it is breaking apart (thinks decompose- to break apart/down)

H2 + I2 --> 2HI is a synthesis reaction because synthesis is like creation/ building

think DNA synthesis or the book of genesis in the bible about creation

2 Na + 2 H20 --> NaOH + H2 --- not balanced at all

other one is a balanced equation- the Zn + 2HCl one

Explanation:

Answer:

Explanation:  Ethanol, CH3CH2OH, has the highest of the three boiling points because it has the strongest dipole–dipole forces between molecules due to hydrogen bonding. ... Dimethyl ether, CH3OCH3, has the second- highest boiling point because it has dipole–dipole forces between molecules.

Answer:

Explain:- 22.4L Imol Page 10 Many gas law problems involve calculating the volume of a gas produced by the reaction of volumes of other gases. The problem solving strategy that we have used throughout your chemistry course is still the same. 10.

The volume would 9.23 moles of oxygen gas occupy at 825 mmHg and 45 C 22.4L.

According to the Ideal Gas Law, all gases contain the same number of molecules at the same temperature, pressure, and volume (but not the same mass).

When the temperature and pressure are close to the point of transforming into a liquid or solid, the Ideal Gas law does not apply.

There are four governing assumptions for a gas to be "ideal": The volume of the gas particles is insignificant. The gas particles are all the same size and have no intermolecular forces with one another. According to Newton's Laws of Motion, the gas particles move at random.

Given :

Volume = ?

Number of moles = 9.23 moles

Temperature = 318K

Pressure = 825 mmHg = 1.08 atm

By an ideal gas equation

PV = nRT

V = nRT/ P

= 9.23 × 0.0821 × 318 /  1.08

= 22.4L

Thus, The volume would 9.23 moles of oxygen gas occupy at 825 mmHg and 45 C is 22.4L.

To learn more about an ideal gas law, follow the link;

https://brainly.com/question/28257995

#SPJ6

Answer: The final pressure is 116kPa or [tex]116kN/m^2[/tex]

Explanation:

The combined gas equation is,

[tex]\frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex]

where,

[tex]P_1[/tex] = initial pressure of gas = [tex]250kN/m^2=250kPa[/tex]   [tex](1kN/m^2=1kPa)[/tex]

[tex]P_2[/tex] = final pressure of gas = ?

[tex]V_1[/tex] = initial volume of gas = v ml

[tex]V_2[/tex] = final volume of gas = [tex]1.8\times v=1.8vml[/tex]

[tex]T_1[/tex] = initial temperature of gas = [tex]75^0C=(75+273)K=348K[/tex]

[tex]T_2[/tex] = final temperature of gas = [tex]18^0C=(18+273)K=291K[/tex]

Now put all the given values in the above equation, we get:

[tex]\frac{250kPa\times v}{348}=\frac{P_2\times 1.8v}{291}[/tex]

[tex]P_2=116kPa[/tex]

The final pressure is 116kPa or [tex]116kN/m^2[/tex]

Answer:

0.9moles of Zn are produced

Explanation:

Based on the reaction:

ZnO + 2Na → Na2O + Zn

1 mole of ZnO reacts with 2 moles of Na to produce 1 mole of Na2O and 1 mole of Zn

For 2 moles of sodium present, 1 mole of Zn is produced (The conversion factor is 2mol Na = 1mol Zn

If 1.8 moles of sodium are present:

1.8mol Na * (1mol Zn / 2mol Na) =

Answer:

hydrophobic: tending to repel or fail to mix with water.

hydrophylic​: having a tendency to mix with, dissolve in, or be wetted by water.

Hope it helps!!!

Calculation: Molar mass of water = 180 % of water = > 180/286*100 = > 62.93%.

Answer: the percent by mass of water in the hydrate Na2CO3.10H20 is 62.93%.

Answer:

Sea breeze moves from the areas of higher pressure on the water in the direction of the areas of lower pressure on land.

Explanation:

Sea breeze moves from the areas of higher pressure on the water in the direction of the areas of lower pressure on land. Whereas, land breeze blows from the areas of higher pressure on land to the areas of lower pressure on water.

Answer:

Magnetic susceptibility is the degree to which a material can be magnetized in an external magnetic field. If the ratio between the induced magnetization and the inducing field is expressed per unit volume, volume susceptibility (k) is defined as.

Explanation:

good luck

Answer: The molarity of given solution is 0.476 M.

Explanation:

Given : mass of sample (solute) = 7.0 g

Volume of solution (solvent) = 250 mL

Convert mL into L as follows.

[tex]1 mL = 0.001 L\\ 250 mL = 250 mL \times \frac{0.001 L}{1 mL}\\= 0.25 L[/tex]

Molar mass of NaCl is 58.44 g/mol. Hence, moles of NaCl are calculated as follows.

[tex]No. of moles = \frac{mass}{molar mass}\\= \frac{7.00 g}{58.44 g/mol}\\= 0.119 mol[/tex]

Molarity is the number of moles of a substance present in one liter of solution or solvent.

So, molarity of given solution is calculated as follows.

[tex]Molarity = \frac{no. of moles}{Volume (in L)}\\= \frac{0.119 mol}{0.25 L}\\= 0.476 M[/tex]

Thus, we can conclude that molarity of given solution is 0.476 M.

Answer:

think I did this before and its V

Answer:

3Sn + 4HNO3 + H2O → 3H2SnO3 + 4NO

Answer:

b

Explanation:

reverse the first reaction

multiply the second by 5

multiply the third by 3

3244.8-1967.5-1450.5=-173.2

Answer:

burning wood be a chemical change because it wouldn’t be able to go back to its original form. A physical change would be a broken pencil. The pencil is still a pencil, it’s just a physical change.But if it were burned it would be a chemical change.

Explanation:

Answer: Its acceleration is -5 meters/second2.

Explanation:

Answer:

False.

Explanation:

The given statement asserts a false claim because the equator is the region that receives maximum sunlight. The equator is placed right below the sun and thus, it tends to receive the maximum radiation across the year. While the poles are the coldest regions of the Earth because due to Earth's titled axis, they receive very few sun rays for a certain time of the year. Thus, if we move away from the equator, we are likely to receive less radiation from the sun as the sun keeps getting farther while moving away from the equator.

Answer:

? more info

Explanation:

Give users an example of the reactions you've learned about so we can have more of an idea. I'd be glad to help, if you edited your answer, meanwhile I too have homework in need of finishing.

Answer:

Synthesis Reaction

Explanation:

Here we see H2 and O2 are being combined H2O. Synthesis reactions are where we see a combination to make a single product.

So here it'd be A + B =AB

2Na(s)+Cl2(g)→2NaCl(s)

Decomposition would be the break down of a compound into 2, the opposite of synthesis.

AB = A + B

2HgO(s)→2Hg(l)+O2(g)

Single replacement is where  1 element replaces another in a reaction, or switches place with 1 element.

AY + B = A + BY

2 HCl(aq) + Zn(s) → ZnCl2(aq) + H2(g)

Double replacement is similar but 2 elements are switch/replaced.

AY + BX = AX + BY

CuCl2(aq) + 2 AgNO3(aq) → Cu(NO3)2(aq) + 2 AgCl(s)

Answer:

A -  Nitrile compound

B-   AlkylAmine

C-   Alcohol

D -  Alkene

Explanation:

(A) undergoes reduction to form alkylamine.

(B) is a primary alkyl amine which on carbylamine test gives a foul smell.

(B) reacts with NaNO2 + HCl undergoes diasotisation following which alcohol is produced.

(C) being a alcohol undergoes hydrolysis to give alkene.

(D) On further reaction with H2S04 by the rule of Markownikoff rule it forms a isomer of (C).

Explanation:

c . produces bile is not the function of slaiva

Answer:

B. partially digests starch

Answer:

615 g

Explanation:

In order to convert from moles of any given substance into grams, we have to use said substance's molar mass, as follows:

Thus, we now calculate the molar mass of beryllium iodide, BeI₂, using the molar masses of the elements:

Finally we calculate how many grams are there in 2.34 moles of BeI₂:

Answer:

NO

Explanation:

Water and N₂ cannot be the answer because they are products of the reaction, not reactants.

The fact that some ammonia (NH₃) is left in the container once the reaction is finished tells us that NH₃ is the reactant in excess.

The remaining reactant is thus the limiting reactant. The correct answer is NO.

Answer:

The reaction given is  

Chemistry homework question answer, step 1, image 1

Since in equilibrium constant expression, the concentration of liquid components is not written.

Hence the equilibrium constant expression for the above reaction can be written as  

Chemistry homework question answer, step 1, image 2

where [NO] = equilibrium concentration of NO

[NO2 ] = equilibrium concentration of NO2

[HNO3 ] = equilibrium concentration of HNO3

Step 2

Given : mass of NO at equilibrium = 18.6 g

mass of NO2 at equilibrium = 15.1 g

and mass of HNO3 at equilibrium = 13.1 g

Since molar mass of HNO3 = 63 g/mol, molar mass of NO = 30 g/mol and molar mass of NO2 = 46 g/mol

Hence the moles of gases at equilibrium are

Chemistry homework question answer, step 2, image 1

Step 3

Since mass of solution = mass of HNO3 + mass of water = 13.1 + 234.8 = 247.9 g

Assuming density of solution = density of water = 1.00 g/mL

=> mass of solution = volume of solution X density of solution  

=> 247.9 = 1.00 X volume of solution  

=> volume of solution = 247.9 mL = 0.2479 L      

Explanation:

Li2O

Fe(NO3)3

Al2O3

CuCl2

ZnSO4

All you have to do here is make sure your charges are balanced when you write the compound. For example, Iron (III) has a +3 charge, and nitrate has a -1 charge. You need 3 nitrates to match that charge, hence Fe(NO3)3.