As the loop moves away from the magnet, the force weakens and is greatest when it is directly beneath the magnet.
When a conducting circular loop moves downwards beneath a stationary magnet with its north pole pointing upward, an induced current is produced in the loop. This induced current flows in a counterclockwise direction, as seen from above.
Additionally, the loop experiences a force due to the magnet. This force is perpendicular to both the direction of motion of the loop and the direction of the magnetic field produced by the magnet. The force is given by the formula F = BIL, where B is the strength of the magnetic field, I is the current induced in the loop, and L is the length of the loop that is in contact with the magnetic field.
Since the loop is moving downwards, the force on it is upwards, opposite to the direction of motion. The force is strongest when the loop is directly under the magnet and decreases as the loop moves away from the magnet.
To learn more about : magnet
https://brainly.com/question/14997726
#SPJ11
Select the statement that is NOT true
the magnetic field lines always cross one another
the magnetic field lines have the same strength
magnetic field lines flow from north to south
magnetic field lines are concentrated at the poles
The statement that is NOT true is: "the magnetic field lines always cross one another."
What is the true statement?Magnetic field lines do not cross one other since they depict the direction of the magnetic field at every position in space. The crossing of two field lines would cause the magnetic field to have two opposite directions at the same spot, which is not possible.
The magnetic field's direction is determined by the orientation of the magnetic dipole moment at its source of starting.
Learn more about Lines of force:https://brainly.com/question/30422314
#SPJ1
If I weigh 742. 32 N on Earth at a place where g = 9. 80 m/s2 and 5900. 91 N on the surface of another planet, what is the acceleration due to gravity on that planet?
The acceleration due to gravity on the surface of the other planet is approximately 77.98 m/s².
To find the acceleration due to gravity on another planet, we can use the formula:
Weight = Mass × Acceleration due to gravity
On Earth, your weight is given as 742.32 N, and the acceleration due to gravity is 9.80 m/s².
We can rearrange the formula to solve for mass:
Mass = Weight / Acceleration due to gravity
So, on Earth, your mass would be:
Mass on Earth = 742.32 N / 9.80 m/s²
Mass on Earth = 75.63 kg
Now, let's consider the surface of another planet where your weight is given as 5900.91 N.
We'll use the same formula and solve for the acceleration due to gravity on that planet:
5900.91 N = Mass × Acceleration due to gravity on the other planet
Substituting the value of mass we calculated earlier:
5900.91 N = 75.63 kg × Acceleration due to gravity on the other planet
Now, we can solve for the acceleration due to gravity on the other planet:
Acceleration due to gravity on the other planet = 5900.91 N / 75.63 kg
Acceleration due to gravity on the other planet ≈ 77.98 m/s²
To know more about acceleration refer here
https://brainly.com/question/9415862#
#SPJ11
Suppose that you wanted to travel to the next closest star to earth. proxima
centauri is the closest star to our solar system at a distance of 4.3 light years.
knowing that the space shuttle's typical speed is 28,000km/hr. how long
would it take you to get there?
It is equivalent to approximately 60.5 million days, or 165,850 years. The distance to Proxima Centauri is 4.3 light-years, which is equivalent to 4.068 x [tex]10^{13}[/tex] km.
To calculate how long it would take to travel that distance at a speed of 28,000 km/hr, we can divide the distance by the speed: 4.068 x [tex]10^{13}[/tex] km ÷ 28,000 km/hr = 1.452 x [tex]10^{9}[/tex] hours
That is equivalent to approximately 60.5 million days, or 165,850 years.
Therefore, it is currently not possible to travel to Proxima Centauri with the technology available to us. We would need to develop much faster spacecraft and propulsion systems to make interstellar travel feasible.
To know more about Proxima Centauri, refer here:
https://brainly.com/question/21107590#
#SPJ11
A proton moving eastward with a velocity of 5. 0 km/s enters a magnetic field of 0. 20 T pointing northward. What are the magnitude and direction of the force that the magnetic field exerts on the proton
The magnitude of the force that a magnetic field exerts on a charged particle is given by the equation:
F = qvB sin(theta)
where q is the charge of the particle, v is its velocity, B is the magnetic field strength, and theta is the angle between the velocity vector and the magnetic field vector.
In this case, the proton has a positive charge of +1.6 x 10^-19 C, and it is moving eastward with a velocity of 5.0 km/s. The magnetic field is pointing northward with a strength of 0.20 T.
The angle between the velocity vector and the magnetic field vector is 90 degrees, since the velocity is eastward and the magnetic field is northward.
Plugging these values into the equation, we get:
F = (1.6 x 10^-19 C)(5.0 x 10^3 m/s)(0.20 T) sin(90)
F = 1.6 x 10^-19 N
So the magnitude of the force that the magnetic field exerts on the proton is 1.6 x 10^-19 N.
The direction of the force can be determined using the right-hand rule. If you point your right thumb in the direction of the proton's velocity (eastward), and your fingers in the direction of the magnetic field (northward), then the direction of the force vector is perpendicular to both, pointing downward. Therefore, the direction of the force on the proton is southward.
you pull a sled with a package on it across a snow covered flat lawn. if u apply a force of 46.8 N to the sled, it accelerates at 0.75 m/s. what is the combined mass of the package and sled
The combined mass of the package and the sled can be found to be 62.4 kg.
How to find the combined mass ?We can use Newton's second law of motion, which states that the net force acting on an object is equal to the product of its mass and acceleration (F net = ma), to solve this problem.
F net = ma
46.8 N = (m sled + m package) × 0.75 m/s²
To find the combined mass of the sled and package, we need to add their individual masses together. Therefore, we can rewrite the equation as:
46.8 N = (m sled + m package) × 0.75 m/s²
46.8 N / 0.75 m/s² = m sled + m package
62.4 kg = m sled + m package
Find out more on combined mass at https://brainly.com/question/19190348
#SPJ1
1. Using a block-and-tackle, a mechanic pulls 8. 2 m of chain with a force of 90 N in
order to lift a 320 N motor to a height of 2. 9 m.
a) What is the AMA( Actual mechanical advantage) 10 points
b) What is the IMA (Ideal Mechanical Advantage) 10 points
c. What is the efficiency of the block-and-tackle? (10 points)
The Actual Mechanical Advantage (AMA) is the ratio of the output force to the input force and can be calculated by dividing the output force (320 N) by the input force (90 N). This gives an AMA of 3.556.
What is force?Force is an external influence that causes an object to move, stop, accelerate, or change direction. It is expressed in a variety of ways, such as the push of a hand, the pull of gravity, or a blast of air. It can also be expressed in terms of energy, such as sound waves, radiation, or electrical current. Force is a vector quantity, meaning it has both magnitude and direction. This means that when two forces act on an object, the result is the sum of the forces acting in the same direction, and the difference of the forces acting in opposite directions.
a) The Actual Mechanical Advantage (AMA) is the ratio of the output force to the input force and can be calculated by dividing the output force (320 N) by the input force (90 N). This gives an AMA of 3.556.
b) The Ideal Mechanical Advantage (IMA) is the ratio of the output distance to the input distance and can be calculated by dividing the output distance (2.9 m) by the input distance (8.2 m). This gives an IMA of 0.353.
c) The efficiency of the block-and-tackle can be calculated by dividing the AMA by the IMA and multiplying by 100. This gives an efficiency of 100 x 3.556/0.353 = 1008.8%. This means that the block-and-tackle is able to convert 1008.8% of the input force into output force.
To learn more about force
https://brainly.com/question/12785175
#SPJ4
A student swings a ball on a light rod at a constant speed in a vertical circle, as shown in the figure. Which of the following correctly ranks the magnitudes of the forces exerted by the rod on the ball F1, F2, F3, and F4 when the ball is at locations 1, 2, 3, and 4, respectively? Responses
F1=F2=F3=F4
(F2=F3)>F4>F
F4>F1>(F2=F3)
F1>F4>(F2=F3)
The expression that correctly ranks the magnitudes of the forces exerted by the rod on the ball is C, F4 > F1 > (F2 = F3).
How to determine magnitude?At location 4, the force exerted by the rod on the ball is equal to the weight of the ball plus the centripetal force required to keep the ball moving in a circle. At locations 1 and 2, the force exerted by the rod on the ball is equal to the weight of the ball minus the centripetal force.
At location 3, the force exerted by the rod on the ball is equal to the weight of the ball because there is no centripetal force required at the highest point of the circle. Therefore, the ranking of the forces is F4 > F1 > (F2 = F3).
Find out more on magnitudes here: https://brainly.com/question/30337362
#SPJ1
Which surface would have more friction?
wooden
glass
paper
sandpaper
Out of the given options, sandpaper would have the highest friction.
Friction depends on two factors - surface roughness and surface area in contact also depends on Normal force. Sandpaper has a very rough, abrasive surface with lots of peaks and valleys. This greatly increases the surface area in contact and mechanical interlocking with any surface it touches. This results in high friction.The other options:• Wooden surface: Depends on the smoothness of the wood, can range from low to medium friction.
• Glass surface: Very smooth so it has low friction.
• Paper surface: Relatively smooth so friction would be low to medium depending on the paper type.
from lowest to highest friction it would be:Glass < Paper < Wooden < SandpaperSandpaper has the roughest surface, so it exhibits the highest friction among the given options.The maximum allowable resistance for an underwater cable is one hundredth of an ohm per
meter and the resistivity of copper is 1. 54 x 10-80m.
a) Calculate the smallest cross sectional area of copper cable that could be used.
The smallest cross-sectional area of the copper cable that could be used is approximately 1.54 x 10^-6 square meters.
To calculate the smallest cross-sectional area of the copper cable that could be used, we need to apply Ohm's law and the formula for resistivity.
Ohm's law states that resistance (R) equals resistivity (ρ) multiplied by the length (L) of the conductor, divided by the cross-sectional area (A). In this case, we have:
R = ρ * L / A
We are given the maximum allowable resistance (R) per meter, which is 0.01 ohms/meter, and the resistivity of copper (ρ) as 1.54 x 10^-8 ohm-meter. Since we're considering resistance per meter, the length (L) is 1 meter. We need to find the smallest cross-sectional area (A) that satisfies these conditions.
0.01 ohm = (1.54 x 10^-8 ohm-meter) * 1 meter / A
To find A, we can rearrange the formula:
A = (1.54 x 10^-8 ohm-meter) * 1 meter / 0.01 ohm
A ≈ 1.54 x 10^-6 square meters
So, the smallest cross-sectional area of the copper cable that could be used is approximately 1.54 x 10^-6 square meters.
To learn more about copper, refer below:
https://brainly.com/question/13677872
#SPJ11
If the protons were not held together by the strong nuclear force, what would be their initial acceleration due to the electric force between them
Using Newton's second law, F = ma, and the known mass of a proton, 1.673 x [tex]10^{27}[/tex] kg, the initial acceleration of the protons would be approximately 1.38 x [tex]10^{1}[/tex] [tex]m/s^{2}[/tex].
If the protons were not held together by the strong nuclear force, they would experience an electric force due to their positive charges.
According to Coulomb's law, the electric force between two charges is proportional to the product of the charges and inversely proportional to the square of the distance between them.
Therefore, the initial acceleration of the protons would depend on their separation distance and the magnitude of their charges.
Assuming a separation distance of 1 angstrom ([tex]10^{-10}[/tex] m), the electric force between two protons with charges of 1.602 x [tex]10^{-19}[/tex] C would be approximately 2.31 x [tex]10^{-28}[/tex] N.
Using Newton's second law, F = ma, and the known mass of a proton, 1.673 x [tex]10^{-27}[/tex] kg, the initial acceleration of the protons would be approximately 1.38 x [tex]10^{1}[/tex] [tex]m/s^{2}[/tex].
To know more about Newton's second law, refer here:
https://brainly.com/question/13447525#
#SPJ11
Suppose the book-printing industry is competitive and begins in a long-run equilibrium. Then hi-tech printing company invents a new process that sharply reduces the cost of printing books.
The new process will cause the demand for book printing services to increase, and this will cause the price of book printing services to fall.
The long-run equilibrium will shift to a new equilibrium, where the new cost structure will be reflected in the price of book printing services. The new process will result in lower prices and higher demand for book printing services, leading to an increase in the number of firms in the book printing industry, as well as an increase in the size of the market.
The cost savings due to the new process will be passed on to consumers, resulting in lower prices for books. This will benefit both the book printing companies as well as the consumers.
Know more about equilibrium here
https://brainly.com/question/30807709#
#SPJ11
Which isotope of carbon has the strongest nuclear and electrostatic forces? Explain your reasoning
The electrostatic forces are the same for all isotopes of carbon, but carbon-14 has the strongest nuclear forces due to the additional neutrons in its nucleus.
All isotopes of carbon have the same number of protons in their nucleus, which determines the electrostatic forces between the positively charged protons and negatively charged electrons. Therefore, the electrostatic forces are the same for all isotopes of carbon.
The strength of nuclear forces depends on the number of protons and neutrons in the nucleus. Generally, the more protons and neutrons an isotope has, the stronger the nuclear forces.
Carbon has three naturally occurring isotopes: carbon-12, carbon-13, and carbon-14. Carbon-12 has 6 protons and 6 neutrons, carbon-13 has 6 protons and 7 neutrons, and carbon-14 has 6 protons and 8 neutrons.
Therefore, carbon-14 has the strongest nuclear forces because it has the most neutrons in its nucleus. However, it is important to note that the difference in nuclear forces between carbon-12 and carbon-14 is relatively small and not significant in most everyday situations.
In summary, the electrostatic forces are the same for all isotopes of carbon, but carbon-14 has the strongest nuclear forces due to the additional neutrons in its nucleus.
To know more about forces refer here:
https://brainly.com/question/26115859#
#SPJ11
Horticulture (HURRY) 120 pts
Specialized technology works well in
, where the uniformity of the crop encourages tight-focused machines rather than unspecialized machines that can be adapted for multiple tasks
Horticulture is a field that greatly benefits from specialized technology. This is because the uniformity of crops in horticulture allows for machines that are tightly focused on specific tasks.
These machines are designed to perform specialized functions such as planting, pruning, and harvesting. This specialized equipment ensures that the crops are tended to with precision and care, which results in higher yields and better quality produce.
In contrast, unspecialized machines that can be adapted for multiple tasks may not perform as well in horticulture because they lack the precision and efficiency required for these specialized tasks.
So, in horticulture, specialized technology works well because it allows for precise and efficient handling of crops, which ultimately leads to better yields and higher-quality produce.
To learn more about horticulture, refer below:
https://brainly.com/question/28991945
#SPJ11
A length of copper wire was measured with a tape measure to give a length of 50. 0m with an uncertainty of 1 cm. The thickness of the wire was measured to be 1. 00mm,using a micrometer screw gauge. Calculate the volume of the copper used?
A copper wire was measured to be 50.0m long with an uncertainty of 1cm and had a thickness of 1.00mm measured with a micrometer screw gauge. The volume of copper used was [tex]3.93 \times 10^{-5}\; m^3[/tex] with an uncertainty of [tex]\pm 7.85 \times 10^{-9} m^3[/tex].
The volume of copper used can be calculated by multiplying the length, cross-sectional area, and density of copper. The length is given as 50.0 m with an uncertainty of [tex]\pm 0.01[/tex]m, and the thickness of the wire is given as 1.00 mm, which is equivalent to 0.001 m.
The cross-sectional area of the wire can be calculated using the formula for the area of a circle, which is πr², where r is the radius of the wire.
The radius of the wire can be calculated by dividing its thickness by 2, giving a value of 0.0005 m. Therefore, the cross-sectional area is [tex]\pi (0.0005)^2 = 7.85 \times 10^{-7} m^2[/tex]. The density of copper is 8.96 g/cm³, which is equivalent to [tex]8.96 \times 10^3 \;kg/m^3[/tex].
Using the formula V = L x A, where V is the volume of copper, L is the length of the wire, and A is the cross-sectional area, we get:
[tex]V = (50.0 \pm 0.01 m) \times (7.85 \times 10^{-7} m^2)[/tex]
[tex]V = 3.93 \times 10^{-5} m^3 \pm 7.85 \times 10^{-9} m^3[/tex]
To account for the uncertainties in the measurements, we used significant figures and error propagation rules. The uncertainty in the volume was calculated using the formula for the multiplication of quantities with uncertainties.
In summary, the volume of copper used was found to be [tex]3.93 \times 10^{-5}\; m^3[/tex] with an uncertainty of [tex]\pm 7.85 \times 10^{-9} m^3[/tex].
To know more about volume refer here:
https://brainly.com/question/30347304#
#SPJ11
8. Parts of transformer usually made of plastic materials,used to support the primary and
A. Bobbin B. Core C. Primary Winding D. Secondary Winding
The part of a transformer that is usually made of plastic materials and used to support the primary and secondary windings is A. Bobbin.
Here are some key points to elaborate on the role of the bobbin in a transformer:
Structural Support: The primary and secondary windings of a transformer consist of multiple turns of conductive wire. The bobbin provides structural support by holding the windings in place and preventing them from moving or coming into contact with each other.
This helps maintain the integrity and alignment of the windings.
Electrical Isolation: Since the bobbin is made of an insulating material such as plastic, it provides electrical isolation between the primary and secondary windings.
This insulation is essential to prevent short circuits and ensure that the electrical energy is properly transferred between the windings.
Coil Formation: The bobbin is designed with specific slots or grooves to accommodate the primary and secondary windings.
These slots allow for the organized and precise arrangement of the wire coils, ensuring that the winding turns are evenly distributed and properly spaced.
Heat Dissipation: Transformers generate heat during operation due to electrical losses. The bobbin, being made of an insulating material, helps in the thermal insulation of the windings.
It prevents the heat generated by the windings from directly transferring to the surrounding components or the transformer core.
Size and Shape: The bobbin is typically designed to fit the specific size and shape requirements of the transformer. It can vary in size and shape depending on the transformer's power rating, voltage level, and application.
The design of the bobbin ensures that it can securely hold the windings while optimizing the overall size and efficiency of the transformer.
To learn more about plastic, refer below:
https://brainly.com/question/23509463
#SPJ11
Calculate the weight of an object sitting on the Earth’s surface if the mass of the object is 50 kg? Assuming the force of gravity g = 9. 81 m/s²)
The weight of an object with a mass of 50 kg on Earth's surface is 490.5 N (Newtons).
To calculate the weight of an object on Earth's surface, we need to consider the mass of the object and the force of gravity (g). In this case, the mass is given as 50 kg, and the force of gravity is assumed to be 9.81 m/s².
Step-by-step explanation:
1. Start with the mass of the object (m) which is given as 50 kg.
2. Next, take the force of gravity (g) as 9.81 m/s² (as provided).
3. Now, we need to use the weight formula, which is:
Weight (W) = mass (m) × force of gravity (g)
4. Substitute the values of mass and force of gravity in the formula:
W = 50 kg × 9.81 m/s²
5. Perform the multiplication:
W = 490.5 N
So, the weight of the object sitting on Earth's surface with a mass of 50 kg is 490.5 Newtons.
Know more about force of gravity click here:
https://brainly.com/question/14874038
#SPJ11
A small truck is moving at 20 m/s. A large truck, with twice the mass, is traveling at half the speed. How does the momentum of the larger truck compare to the smaller truck?
The momentum of an object is directly proportional to its mass and velocity. Therefore, the momentum of the larger truck can be calculated as follows:
Momentum of larger truck = (2 x mass of smaller truck) x (1/2 x velocity of smaller truck)
Momentum of larger truck = (2 x m) x (0.5 x 20)
Momentum of larger truck = m x 20
This shows that the momentum of the larger truck is equal to the momentum of the smaller truck, as the increased mass is balanced by the decreased velocity.
In other words, the momentum of an object depends on both its mass and velocity, and changes in one factor can be compensated by changes in the other factor to maintain the same momentum.
To know more about Momentum, refer here:
https://brainly.com/question/30677308#
#SPJ11
A 2 ω resistor and a 8.0 mh inductor are used in an lr circuit. if the initial current in the circuit is 2.0 a when a switch is thrown that allows the current in the circuit to decay, at what time will the current be 1.0 a?
The initial current is 2A, resistance is 2Ω, and inductance is 0.008H. The time for current decay to 1A is found to be around 2.1ms using the natural logarithm.
The current in an LR circuit can be modeled by the equation:
[tex]I(t) = I0e^{(-Rt/L)}[/tex]
where I(t) is the current at time t, I0 is the initial current, R is the resistance, L is the inductance, and e is the mathematical constant e.
We are given that the initial current is 2.0 A, the resistance is 2 Ω, and the inductance is 8.0 mH (or 0.008 H). We want to find the time it takes for the current to decay to 1.0 A.
Substituting the given values into the equation, we get:
[tex]1.0 A = 2.0 A \times e^{(-2\Omega t/0.008H)}[/tex]
Simplifying, we can divide both sides by 2.0 A and take the natural logarithm of both sides:
[tex]ln(0.5) = -2\Omega t/0.008H[/tex]
Solving for t, we get:
[tex]t = -0.008H \times ln(0.5) / 2\Omega[/tex]
Plugging in the given values, we get:
[tex]t \approx 0.0021 s[/tex] or 2.1 ms
Therefore, it will take approximately 2.1 ms for the current to decay to 1.0 A.
In an LR circuit, the inductor resists changes in current, so when the switch is thrown and the current starts to decay, the inductor generates a back EMF that opposes the change in current. This causes the current to decay exponentially over time, as described by the above equation.
To know more about resistance refer here:
https://brainly.com/question/30155623#
#SPJ11
A new planet called "Corus" was discovered by a team of astronomers that
is 60 x 106 km away from Earth. A satellite was launched by a rocket from
Earth to reach Corus. At a specific distance from Corus, the rocket releases
the satellite to the orbit of the planet. The satellite makes one complete
revolution around Corus in 15 Earth days. If Corus has a similar mass to
Mars, propose a suitable mass of the satellite and estimate:
i.
ii.
Distance between the satellite and the Corus's surface
Satellite's gravitational acceleration towards the core of Corus
Gravitational force between the satellite and the Corus
Minimum speed of the satellite to orbit Corus
iv.
Because the planet is so far away from Earth, we will assume that it has no effect on Corus. The satellite radius will be 121943.5927 km.
The mass of the Corus is precisely equivalent to the mass of the Mars, we take it M. We see that the rocket makes a total rotation about the planet in only 15 days, so we expect that the rocket was spinning all over the world about a radius r. In this way, the satellite will move with at his range in the wake of detaching from the rocket.
We know T = 2πr/v
mv²/ r = GMm/r ²
where m = mass of satellite
r = GMm/ mv² = GM /v²
r = GMT²/ 4 π²r² , putting the value of v
r³ = (GM / 4 π²r²) T²
r³ = ( GM / 4π² ) ¹/³ T²/³
G = 6.67 × 10 ⁻¹¹
M = 6.39 × 10 ²³ kg
T = 1296000
r = 10258.621 × 11886.94
r = 121943.5927 km
gravitational acceleration towards the core of corner = GM/ r²
a = 6.67 × 10 ⁻¹¹ ×6.39 ×10 ²³/ (121943592.7) ²
a = 2.89 × 10 ⁻³ m/s²
force between satellite and the Corus =mass of the satellite × acceleration of the satellite
iv) minimum speed = [GM/r(1+e)]¹/² e is the eccentricity of the satellite
How does gravitational acceleration work?Gravitational speed increase is portrayed as the article getting a speed increase because of the power of gravity following up on it. It is measured in m/s2, and its symbol is g. Gravitational acceleration is a vector quantity with a magnitude and a direction.
What does "gravitational" mean?The universe is governed by a force known as gravity, also referred to as gravitation. For any two items or particles having nonzero mass, the power of gravity will in general draw in them toward one another. Everything from subatomic particles to galaxies in a cluster is affected by gravity.
Learn more about Gravitational acceleration:
brainly.com/question/88039
#SPJ4
in a football game wanting kicks off to the other at the moment the receiver catches the ball he is 40 m from the nearest Tucker the receiving runs left to right at a speed of 10 m/s the toddler runs right to left at a speed of 6 m/s
Answer: yes
Explanation: good luck
Jose conducted an experiment to measure the rate of minerals dissolving in water and changed the temperature of the water for each trial.
What is the independent variable in this experiment?
A: number of trials being tested
B: temperature of the water
C: type of minerals used for each trial
D: rate the minerals dissolved
Answer: B. Temperature of water
Explanation:
An independent variable is "the variable that is changed or controlled in a scientific experiment or a mathematical or statistical model" and "It is the variable that the researcher chooses and that may affect the dependent variable"
The Temperature of the water is only affected by Jose thus it is a independent variable
10. A thin beam of laser light of wavelength 514 nm passes through a diffraction grating having 3952 lines/cm. The resulting pattern is viewed on a distant curved screen that can show all bright fringes up to and including ±90. 0° from the central spot. What is the TOTAL number of bright fringes that will show up on the screen? A) 4 B) 5 C) 8 D) 9 E) 10
The TOTAL number of bright fringes that will show up on the screen is B) 5.
To answer this question, we need to use the following terms: wavelength, diffraction grating, lines/cm, and bright fringes.
Step 1: Convert the given data into meters
Wavelength (λ) = 514 nm = 514 * 10^(-9) m
Lines per cm (n) = 3952 lines/cm = 3952 * 10^2 lines/m (since 1 cm = 0.01 m)
Step 2: Calculate the grating spacing (d)
d = 1 / n = 1 / (3952 * 10^2) m
Step 3: Calculate the maximum order (m) using the grating equation
sin(90°) = m * λ / d
Since sin(90°) = 1,
m = d / λ
Step 4: Plug in the values and solve for m
m = (1 / (3952 * 10^2)) / (514 * 10^(-9))
m ≈ 2.09
Since m must be an integer, the maximum order is m = 2.
Step 5: Count the total number of bright fringes
For each order, there are 2 bright fringes (one on each side of the central spot), and one central spot (m = 0). Thus, the total number of bright fringes is:
Total bright fringes = 2 * (number of orders) + 1
Total bright fringes = 2 * (2) + 1
Total bright fringes = 5
So, the correct answer is B) 5.
For more about bright fringes:
https://brainly.com/question/31591286
#SPJ11
Activity 3:
Direction: Read the sample weather bulletin.
Weather Bulletin: Tropical Cyclone Typhoon Rolly (GONI)
Sunday, 1 November, 2020 at 4:00 PM (DOST PAG-ASA 2020)
Location of Center
50 km South Southwest of Tayabas, Quezon
Coordinates
13. 6°N, 121. 40 E
Strength of the Winds
Maximum sustained winds of 165 km/h near
the center and gustiness of up to 230 km/h.
Movernent
Moving westward at 25 km/h
Forecast positions
(24 hours) Afternoon of November 2: 300 km
West of Iba, Zambales
15. 1° N, 117. 20 E
(48 hours) Afternoon of November 3: 665 km
West of Iba, Zambales
Outside PAR (15° N, 113. 8°E)
(72 hours) Afternoon of November 4: 935 km
West of Central Luzon
Outside PAR (14. 79 N, 111. 6° E)
Questions:
3.
What is the speed of the typhoon winds?
What is the velocity of the typhoon?
How does speed differ from velocity?
How important is knowing the velocity in determining the weather
forecast for the next hours?
4
Let Us Reflect
Based on the weather bulletin provided for Typhoon Rolly (GONI), the speed of the typhoon winds is 165 km/h with gustiness up to 230 km/h.
The velocity of the typhoon, which takes into account both the speed and direction, is moving westward at 25 km/h.
The main difference between speed and velocity is that speed only considers the magnitude of motion, while velocity includes both the magnitude and direction of motion.
Knowing the velocity of the typhoon is important in determining the weather forecast for the next hours, as it helps predict the movement and potential impact of the typhoon on specific areas.
This information can help authorities and individuals prepare and respond accordingly to ensure safety and minimize damages.
To learn more about forecast, refer below:
https://brainly.com/question/30167588
#SPJ11
Help me!
in your own words, describe how the marble-jar experiment explains newton's law of inertia.
The marble-jar experiment is a classic demonstration of Newton's Law of Inertia. The experiment consists of a jar filled with marbles and a card covering the jar's opening.
When the jar is inverted quickly, the card falls, and the marbles remain in place.
According to Newton's Law of Inertia, an object at rest will remain at rest, and an object in motion will continue to move in a straight line at a constant velocity unless acted upon by an external force.
In this experiment, the marbles' inertia keeps them in place when the jar is inverted, while the card falls due to the external force of gravity.
This experiment provides a simple and tangible way to understand Newton's Law of Inertia.
To know more about Law of Inertia, refer here:
https://brainly.com/question/1830739#
#SPJ11
A motorcyclist traveling due north at 50km/h. the wind appears to come from north west at 60km/h . what is the true velocity of the wind
The true velocity of the wind is approximately 43.10 km/h.
To find the true velocity of the wind when a motorcyclist is traveling due north at 50 km/h, and the wind appears to come from the northwest at 60 km/h, we can use vector addition.
Step 1: Break the wind's apparent velocity into its north and west components. Since the wind is coming from the northwest, the north and west components will be equal.
Using the Pythagorean theorem (a² + b² = c²) to find the components:
North component:
a = 60 * cos(45°)
= 60 * 0.707
= 42.43 km/h
West component:
b = 60 * sin(45°)
= 60 * 0.707
= 42.43 km/h
Step 2: Subtract the motorcyclist's northward velocity from the north component of the wind's apparent velocity:
True north component of the wind:
42.43 - 50 = -7.57 km/h (southward)
Step 3: Combine the true north and west components of the wind's velocity using the Pythagorean theorem:
True wind velocity = √((-7.57)² + (42.43)²)
= √(57.36 + 1800.06)
= √1857.42
≈ 43.10 km/h
The true velocity of the wind is approximately 43.10 km/h.
To know more about velocity refer here
brainly.com/question/17127206#
#SPJ11
when light enters a material of higher index of refraction, its speed select one: a. first increases then decreases. b. increases. c. first decreases then increases. d. decreases.
When light enters a material of higher index of refraction, its speed decreases. Option D is correct.
This phenomenon is known as refraction and is a result of the change in the speed of light as it passes through a material with a different refractive index. The refractive index is a measure of how much a material can bend light, compared to the speed of light in a vacuum. When light passes from a medium with a lower refractive index, such as air or vacuum, to a medium with a higher refractive index, such as water or glass, it slows down and bends towards the normal line, an imaginary line perpendicular to the surface of the material.
The amount of refraction that occurs depends on the angle of incidence, or the angle at which the light strikes the surface, as well as the difference in refractive indices between the two materials. The change in speed and direction of the light as it passes through a material of higher refractive index can be described by Snell's law. Option D is correct.
To know more about the Refraction, here
https://brainly.com/question/23750645
#SPJ4
3. Compute the force of a small car, weighing 2,205 pounds, traveling 60 mph, that crashes into a steel pole and comes to a stop in 0. 05 second? dont know what to do
A small car weighing 2,205 pounds and traveling at 60 mph crashes into a steel pole and stops in 0.05 seconds. The force of the impact is calculated to be -53,600 N.
To calculate the force of a car that crashes into a steel pole, we need to use the formula F = m*a, where F is the force, m is the mass, and a is the acceleration.
To find the acceleration, we can use the formula[tex]a = (v_f - v_i) / t[/tex], where [tex]v_f[/tex] is the final velocity, [tex]v_i[/tex] is the initial velocity, and t is the time it takes to stop.
First, we need to convert the weight of the car from pounds to mass in kilograms, which is 1000 kg. Then, we need to convert the speed from miles per hour to meters per second, which is 26.8 m/s.
Using the formula a = (0 - 26.8) / 0.05, we get an acceleration of -536 m/s². Finally, we can use the formula F = m*a to find the force, which is -53,600 N.
The negative sign indicates that the force is in the opposite direction of the car's motion, meaning the car experiences a deceleration force. The force is very high due to the short stopping time, which can cause severe damage to the car and its occupants.
In summary, the force of a car crashing into a steel pole and coming to a stop in 0.05 seconds can be calculated using the formula F = m*a. Converting the weight to mass and the speed to meters per second, we can find the acceleration and use it to calculate the force.
To know more about force refer here:
https://brainly.com/question/26115859#
#SPJ11
The andromeda galaxy, m31, is in many ways similar to our own galaxy but slightly larger. the linear diameter of the andromeda galaxy along its longest axis is 140,000 light-years, but from our perspective, the andromeda galaxy has a maximum angular diameter of 3.18°. how far away is the andromeda galaxy?
The Andromeda Galaxy distance is approximately 2.52 million light-years away from us.
The Andromeda Galaxy (M31) is indeed similar to our own Milky Way galaxy, but slightly larger with a linear diameter of 140,000 light-years along its longest axis. To determine its distance from us, we can use the angular diameter, which is 3.18°.
We can use the small-angle formula to find the distance. This formula relates the angular diameter (in radians), the actual diameter, and the distance between the observer and the object:
angular diameter (radians) ≈ actual diameter / distance
First, we need to convert the angular diameter from degrees to radians:
3.18° * (π radians / 180°) ≈ 0.0555 radians
Now, plug in the values into the small-angle formula:
0.0555 radians ≈ 140,000 light-years / distance
To solve for the distance, divide both sides of the equation by 0.0555 radians:
distance ≈ 140,000 light-years / 0.0555 radians
distance ≈ 2,522,522 light-years
For more about distance:
https://brainly.com/question/15172156
#SPJ11
Particles q1 = +8. 0 °C, 92 = +3. 5 uc, and
q3 = -2. 5 uC are in a line. Particles qi and q2 are
separated by 0. 10 m and particles q2 and q3 are
separated by 0. 15 m. What is the net force on
particle qı?
Remember: Negative forces (-F) will point Left
Positive forces (+F) will point Right
-2. 5 με
+8. 0 μC
+91
+3. 5 με
+92
93
K 0. 10 m
+
0. 15 m
The net force on particle q1 is approximately 17.12 N to the right.
To calculate the net force on particle q1, we'll use Coulomb's Law: F = k * |q1 * q2| / r^2, where F is the force between two charges, k is the Coulomb's constant (8.99 * 10^9 N m^2/C^2), q1 and q2 are the magnitudes of the charges, and r is the distance between them.
First, we'll find the force between q1 and q2 (F12):
F12 = (8.99 * 10^9 N m^2/C^2) * (8.0 * 10^-6 C) * (3.5 * 10^-6 C) / (0.10 m)^2
F12 = 19.996 N (right)
Next, we'll find the force between q1 and q3 (F13):
F13 = (8.99 * 10^9 N m^2/C^2) * (8.0 * 10^-6 C) * (2.5 * 10^-6 C) / (0.25 m)^2
F13 = 2.8792 N (left)
Now, we'll calculate the net force on q1 (F_net) by subtracting the left force from the right force:
F_net = F12 - F13
F_net = 19.996 N - 2.8792 N
F_net = 17.1168 N (right)
So, the net force on particle q1 is approximately 17.12 N to the right.
To learn more about force, refer below:
https://brainly.com/question/13191643
#SPJ11
What does a fission reaction require to be sustainable?.
A fission reaction requires three main components to be sustainable: a sufficient amount of fissile material, a moderator to control the reaction, and a method of removing heat generated during the reaction.
1. Fissile material: To sustain a fission reaction, there needs to be a sufficient amount of fissile material, such as uranium-235 or plutonium-239. These materials have nuclei that are more likely to split when struck by a neutron, releasing energy and more neutrons in the process.
The critical mass is the minimum amount of fissile material required to maintain a self-sustained chain reaction.
2. Moderator: A moderator is a substance that slows down the neutrons released during fission. This is crucial for sustaining the reaction, as slower neutrons are more likely to be captured by fissile material and induce further fission events. Common moderators include water, heavy water, and graphite.
3. Heat removal: During a fission reaction, a large amount of heat is generated due to the release of energy. In order to maintain a sustainable reaction, it's necessary to remove this heat, typically by transferring it to a coolant, such as water or gas.
The coolant circulates through the reactor core, absorbing heat, and then transfers the heat to a heat exchanger or directly to a steam generator for power production.
In summary, a sustainable fission reaction requires a sufficient amount of fissile material to maintain a chain reaction, a moderator to control the reaction by slowing down neutrons, and an effective method of removing heat generated during the reaction.
To know more about sustainable refer here
https://brainly.com/question/29355708#
#SPJ11
