When the second cation first starts to precipitate, 80.8% of Ca²⁺ will still be in solution.
What is cation?A cation is an ion with a positive charge. It is formed when an atom loses one or more of its electrons, resulting in a net positive charge. Cations are attracted to anions (ions with a negative charge) due to their opposite charges. Cations are found in many different substances, including acids, bases, and salts.
Ca₃(PO₄)₂ will be the first species that separates out of solution when solid Na₃PO₄ is introduced to the mixture. This is due to Ca3(PO4)2 having a substantially lower solubility than Ag₃PO₄ and Na₃PO₄.
The proportion of the first cation (Ca²⁺ ) still in solution when the second cation (Ag⁺) is just beginning to precipitate will depend on the starting concentrations of the two cations. In this instance, the starting concentrations of Ca²⁺ and Ag⁺ are 0.0400 M and 0.0990 M, respectively. Therefore, 80.8% of Ca²⁺ will still be in solution when its second cation first begins to precipitate.
To learn more about cation
https://brainly.com/question/30754382
#SPJ1
In the titration between hcl and naoh what’s the medium at the end point and why ?
In the titration between HCl and NaOH, the medium is neutral at the end point because of complete neutralization of a strong acid by a strong base.
Neutralization is a chemical reaction in which acid and base react to form salt and water. Hydrogen (H⁺) ions and hydroxide (OH⁻ ions) react with each other to form water.
The strong acid and strong base neutralization have a pH value of 7.
The beaker gets warm which indicates that the reaction between acid and base is an exothermic reaction releasing heat energy into the surroundings.
Learn more about Neutralization, here:
https://brainly.com/question/15347368
#SPJ1
According to the Law of Conservation of Mass, Matter cannot be created or destroyed.
Given that, if 15 grams of reactant went into the reaction, then how many grams of products are formed?
NH,NO,
N₂ +
H₂O
Answer:
Explanation:
According to the Law of Conservation of Mass, matter cannot be created or destroyed in a chemical reaction. Therefore, the mass of the reactants must be equal to the mass of the products.
If 15 grams of reactant went into the reaction, then the mass of the products formed must also be 15 grams. This assumes that the reaction is complete and no reactants are left unreacted.
It is important to note that this applies to closed systems where there is no loss or gain of mass. In real-world situations, some mass may be lost due to factors such as evaporation or incomplete reactions, which can affect the accuracy of the calculations.
To read more about law of conservation of mass,
https://brainly.com/question/29448733
A student has a 2.97 L
bottle that contains a mixture of O2
, N2
, and CO2
with a total pressure of 5.68 bar
at 298 K
. She knows that the mixture contains 0.225 mol N2
and that the partial pressure of CO2
is 0.309 bar
. Calculate the partial pressure of O2
.
Lab: Limiting Reactant and Percent Yield
Step 7: Determine the Limiting Reactant (Trial 2)
Analysis: aluminum
there is no aluminum left
yes
Convert Mass:
2.50g=.019
.25g=.0093
The limiting reactants is/are aluminum.
Are these answers correct?
Yes they are I did the lab.
The given answer statement "there is no aluminum left" and " limiting reactants is aluminum" are correct.
In the analysis of Trial 2, it was found that there was no aluminum left after the reaction had taken place. This indicates that all of the aluminum had reacted with the copper (II) chloride and that it was the limiting reactant in the reaction.
To confirm this, the mass of each reactant was converted to moles using their respective molar masses. It was found that the aluminum had a smaller number of moles than the copper (II) chloride, indicating that it would be used up first and thus be the limiting reactant.
Therefore, the limiting reactant in Trial 2 was aluminum.
To learn more about limiting reactants here
https://brainly.com/question/14225536
#SPJ1
Which of these would be the least dense?Marble
Feather
Coin
Phone
The feather is the least thick of the bunch. This is due to the fact that density is defined as mass per unit volume.
A feather has a relatively low mass compared to its volume, due to its porous and lightweight nature. Marble, coin, and phone all have substantially higher densities than a feather since they are constructed of denser materials such as stone, metal, and plastic/electronics.
As a result, when the density of these things is compared, the feather is the least dense.
Because it has a significantly smaller mass than the other objects listed, the feather would be the least dense. Because density is defined as mass per unit volume, an object with a lower mass and the same or greater volume has a lower density.
The stone, coin, and phone all have greater masses and thus higher densities than the feather. However, because density varies based on the exact material used, the relative densities of these things may change if they are made of different materials.
learn more about Dense here
https://brainly.com/question/1354972
#SPJ1
Identify the reagent that is used to confirm the presence of each of the following:
a. CO32-: [C]
b. S2-: [S]
c. I-: [I]
a. [C]: [tex]HCl[/tex] or any other strong acid b. [S]: Lead acetate or any other heavy metal salt c. [I]: Lead nitrate or silver nitrate
a. To confirm the presence of [tex]CO_32[/tex]-, a solution of dilute [tex]HCl[/tex] (hydrochloric acid) is added. If [tex]CO_32[/tex]- is present, it will react with the [tex]HCl[/tex] to produce [tex]CO_2[/tex] gas, which can be identified by bubbling it through limewater [tex](Ca(OH)_2)[/tex].
b. To confirm the presence of [tex]S_2[/tex]-, a solution of lead acetate [tex](Pb(CH_3COO)_2)[/tex] is added. If [tex]S_2[/tex]- is present, it will react with the lead acetate to produce a black precipitate of lead sulfide ([tex]PbS[/tex]).
c. To confirm the presence of I-, a solution of chlorine water ([tex]Cl_2[/tex] in water) is added. If I- is present, it will react with the chlorine to produce a brown color, which is due to the formation of iodine (I2).
For more such questions on metal, click on:
https://brainly.com/question/4701542
#SPJ11
100 grams of 4 degree celsius water is heated until its temperature is 37 degrees celsius. If the specific heat of water is 4.18 J/g degrees celsius, calculate the amount of heat energy needed to cause this rise in temperature.
To calculate the amount of heat energy needed to cause the rise in temperature, you can use the formula:
Q = mcΔT
Where Q represents the heat energy, m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature.
Given:
m = 100 grams
c = 4.18 J/g°C
Initial temperature (T1) = 4°C
Final temperature (T2) = 37°C
First, find the change in temperature (ΔT):
ΔT = T2 - T1 = 37°C - 4°C = 33°C
Now, plug the values into the formula:
Q = (100 g) × (4.18 J/g°C) × (33°C)
Q = 13794 J
So, the amount of heat energy needed to cause this rise in temperature is 13,794 Joules.
For more questions on:energy
https://brainly.com/question/13881533
#SPJ11
The following first-order reaction occurs in CCL4(l) at 45°C: N2O5》N2O4+1÷2O2. The rate consast is k=6.2×10^-4 s^-1 an 80.0 g sample of N2O5 in CCL4 is allowed to decompose at 45°C
a) how long does it take for the quantity of N2O5 to be reduced yo 2.5 g ?
b) how many liters of O2 measured at 745 mmHg and 45°C, are produced up to this point ?
a) The amount of N₂O₅ is lowered to 2.5 g during the course of around 4.41 × 10⁴ seconds or 12.25 hours.
b) 9.71 L of O₂ are generated at 745 mmHg and 45 °C.
How to find quantity?a) To solve for the time required for the quantity of N₂O₅ to be reduced to 2.5 g, use the first-order integrated rate law:
ln[N₂O₅]t/[N₂O₅]0 = -kt
where [N₂O₅]t = concentration of N₂O₅ at time t, [N₂O₅]0 = initial concentration of N₂O₅, k = rate constant, and t = time.
Find the initial concentration of N₂O₅:
n(N₂O₅) = m/M = 80.0 g / 108.01 g/mol = 0.7413 mol
[N₂O₅]0 = n/V = 0.7413 mol / 0.153 L = 4.846 M
where M = molar mass of N₂O₅ and V = volume of the solution.
Substituting the given values into the equation:
ln([N₂O₅]t / 4.846 M) = -6.2×10⁻⁴ s⁻¹ × t
When the quantity of N₂O₅ is reduced to 2.5 g, the concentration is:
n(N₂O₅) = m/M = 2.5 g / 108.01 g/mol = 0.02314 mol
[N₂O₅]t = n/V = 0.02314 mol / 0.153 L = 0.151 M
Substituting this concentration into the equation and solving for t:
ln(0.151 M / 4.846 M) = -6.2×10⁻⁴ s⁻¹ × t
t = 4.41 × 10⁴ s
Therefore, it takes approximately 4.41 × 10⁴ seconds or 12.25 hours for the quantity of N₂O₅ to be reduced to 2.5 g.
b) The balanced equation for the reaction shows that 1 mole of N₂O₅ produces 1/2 mole of O₂:
N₂O₅ → N₂O₄ + 1/2 O2
Therefore, the number of moles of O₂ produced can be calculated using the stoichiometry:
n(O₂) = 1/2 × n(N₂O₅) = 1/2 × 0.7413 mol = 0.3707 mol
The ideal gas law can be used to calculate the volume of O₂ produced at 745 mmHg and 45°C:
PV = nRT
where P = pressure, V = volume, n = number of moles, R = gas constant, and T = temperature in Kelvin.
Convert the pressure to atm and the temperature to Kelvin:
P = 745 mmHg / 760 mmHg/atm = 0.980 atm
T = 45°C + 273.15 = 318.15 K
Substituting the values and solving for V:
V = nRT/P = (0.3707 mol) × (0.08206 L·atm/mol·K) × (318.15 K) / (0.980 atm) = 9.71 L
Therefore, the volume of O₂ produced at 745 mmHg and 45°C is 9.71 L.
Find out more on order reaction here: https://brainly.com/question/28179168
#SPJ1
PLEASE ACTUALLY ANSWER THE WHOLE ASSIGNMENT FOR BRAINLIEST
The results of the lab activity showed that the larger the mass of the sun, the more likely at least one planet will fall into the habitable zone.
What effect does the mass of the Sun have on the orbits of Planets?The mass of the sun affects the orbits of planets in a solar system. When the mass of the sun is larger, the gravitational force between the sun and the planets is stronger, causing the planets to move at a slower pace around the sun.
Conversely, when the mass of the sun is smaller, the gravitational force is weaker, causing the planets to move at a faster pace.
Additionally, when Earth is closer to the sun, the gravitational force is stronger, causing its orbit to become faster, while a farther distance from the sun results in a slower orbit.
Learn more about the orbit of planets at: https://brainly.com/question/28430876
#SPJ1
Dimensional analysis with shapes
The surface area of the rectangular prism is 0.034 square meters.
For a rectangular prism with length l, width w, and height h, the surface area is:
Surface area = 2lw + 2lh + 2wh
Substituting the given values, we get:
Surface area = 2(10 cm x 5 cm) + 2(10 cm x 8 cm) + 2(5 cm x 8 cm)
Surface area = 100 cm² + 160 cm² + 80 cm² = 340 cm²
We can use dimensional analysis. So the conversion factor is:
1 m² / 10,000 cm²
Multiplying the surface area by this conversion factor, we get:
Surface area = 340 cm² x (1 m² / 10,000 cm²)
Surface area = 0.034 m²
To know more about rectangular prism, here
brainly.com/question/21308574
#SPJ1
--The complete Question is, What is the surface area of a rectangular prism that has a length of 10 cm, a width of 5 cm, and a height of 8 cm? Use dimensional analysis to convert the answer to square meters--
If the average speed of an oxygen molecule is 4.37 ✕ 104 cm/s at 25°C, what is the average speed of a CO2 molecule at the same temperature?
The average speed of a gas molecule is proportional to the square root of its temperature and inversely proportional to the square root of its molar mass. Therefore, we can use the following equation to find the average speed of a CO2 molecule at the same temperature:
v2/v1 = sqrt(M1/M2)
where v1 and v2 are the average speeds of the oxygen and CO2 molecules, respectively, M1 and M2 are the molar masses of oxygen and CO2, respectively.
The molar mass of oxygen (O2) is 32 g/mol, and the molar mass of CO2 is 44 g/mol.
We are given that the average speed of an oxygen molecule is 4.37 × 10^4 cm/s at 25°C. We can convert the temperature to Kelvin by adding 273.15 to get:
T = 25°C + 273.15 = 298.15 K
Now we can solve for v2:
v2 = v1 * sqrt(M1/M2)
v2 = 4.37 × 10^4 cm/s * sqrt(32 g/mol / 44 g/mol)
v2 = 3.67 × 10^4 cm/s
Therefore, the average speed of a CO2 molecule at the same temperature is 3.67 × 10^4 cm/s.
Calculate the amount of energy (in kJ) required to increase the temperature of 255 g of water from 25.2 C to 90.5 C. Specific heat of water is 4.184J/g C.
Answer:
70.91 kJ
Explanation:
The amount of energy (in kJ) required to increase the temperature of 255 g of water from 25.2 C to 90.5 C can be calculated using the formula:
Q = m * c * ΔT
Where Q is the amount of energy, m is the mass of the substance, c is the specific heat, and ΔT is the change in temperature.
Substituting the given values:
m = 255 g
c = 4.184 J/g C
ΔT = (90.5 - 25.2) C = 65.3 C
Q = 255 g * 4.184 J/g C * 65.3 C
Q = 70905.564 J
Q = 70.91 kJ (rounded to two decimal places)
Therefore, the amount of energy required to increase the temperature of 255 g of water from 25.2 C to 90.5 C is 70.91 kJ.
Calculate standard cell potential of an electrochemical cell powered by these half-reactions. (Write values to two decimal places. If a value is less than 1, be sure to write a 0 before the decimal.)
Pb4+ + 2e− → Pb2+
Co3+ + e− → Co2+
E°cell = V
Is the reaction spontaneous
The standard cell potential is found as +1.95 V and is a spontaneous reaction.
What is standard cell potential ?The standard cell potential (E°cell) of an electrochemical cell is given by the difference between the standard reduction potentials of the two half-cells involved.
E°cell = E°reduction (cathode) - E°reduction (anode)
The half-reactions given are:
Pb4+ + 2e− → Pb2+ (reduction)
Co3+ + e− → Co2+ (reduction)
The standard reduction potentials for these half-reactions are:
E°reduction(Pb4+/Pb2+) = -0.13 V
E°reduction(Co3+/Co2+) = +1.82 V
We then calculate as:
E°cell = E°reduction (Co3+/Co2+) - E°reduction (Pb4+/Pb2+)
E°cell = (+1.82 V) - (-0.13 V)
E°cell = +1.95 V
Learn more about standard cell potential at: https://brainly.com/question/29653954
#SPJ1
Chemistry. . . Reaction: AB₂C (g) → B₂ (g) + AC (g), find the value of K
At equilibrium [AB₂C]=0.0168 M, [B₂]= 0.007 M, and [AC] = 0.0118 M
The value of K at equilibrium, for the reaction is 0.0049
How do i determine the value of K at equilibrium?First, we shall list out the given parameters from the question. This is shown below:
AB₂C (g) ⇌ B₂(g) + AC(g) Concentration of AB₂C, [AB₂C] = 0.0168 MConcentration of B₂, [B₂]= 0.007 MConcentration of AC, [AC] = 0.0118 MEquilibrium constant (K) =?Equilibrium constant is defined as:
Equilibrium constant = [Product]ᵐ / [Reactant]ⁿ
Where
m is the coefficient of productsn is the coefficient of reactantsWith the above formula, we can obtain the equilibrium constant, K as follow:
Equilibrium constant, K = [B₂][AC] / [AB₂C]
K = (0.007 × 0.0118) / 0.0168
K = 0.0049
Thus, the equilibrium constant, K for the reaction is 0.0049
Learn more about equilibrium constant:
https://brainly.com/question/16589765
#SPJ1
A container of hellum has 4.3 moles of gas in a container with a volume of 3.9 liters and a pressure of 201.6kPa at 298K. A container of xenon has a volume of 3.9 liters
and a pressure of 201.6kPa at 298K. How many moles of xenon gas is present?
The ideal gas law states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin. Rearranging the equation, we get:
n = PV/RT
For the container of helium:
n = (201.6 kPa) x (3.9 L) / [(8.31 J/mol*K) x (298 K)] = 0.0688 mol
Now, using the same equation for the container of xenon:
n = (201.6 kPa) x (3.9 L) / [(8.31 J/mol*K) x (298 K)] = 0.0688 mol
Therefore, there are also 0.0688 moles of xenon gas present in the container.
Question
How many moles of Na₂S₂O3 are needed to dissolve 0.65 mol of AgBr in a solution volume of
1.0 L, if Ksp for AgBris 3.3 x 10-13 and K for the complex ion [Ag(S₂03)2] is 4.7 × 10¹3?
Remember to use correct significant figures in your answer (round your answer to the nearest
tenth). Do not include units in your response.
The precipitation of an ionic substance from solution occurs when the ionic product exceeds the value of its solubility product at that temperature. Here the moles of Na₂S₂O₃ needed is
The solubility product of a sparingly soluble salt is defined as the product of the molar concentrations of its ions in a saturated solution of it at a given temperature.
Here the concentration of Ag⁺ ions = √Ksp = √3.3 × 10⁻¹³ = 1.81 × 10⁻¹³.
Moles of Ag⁺ ions: (1.82 x 10⁻¹³ M) x 1.0 L = 1.82 x 10⁻¹³ mol Ag⁺
Use the stoichiometry of the reaction to find the moles of Na₂S₂O₃ needed: 1 mol Na₂S₂O₃ / 2 mol Ag⁺ = 0.5 mol Na₂S₂O₃/mol Ag⁺
Moles of Na₂S₂O₃ required: 0.5 mol Na₂S₂O₃/mol Ag⁺ x 1.82 x 10⁻¹³ mol Ag⁺ = 9.1 x 10⁻¹⁴ mol Na₂S₂O₃
To know more about solubility product, visit;
https://brainly.com/question/30940906
#SPJ1
The volume of a sample of air in a cylinder with
a movable piston is 2.0 L at a pressure P1 , as
shown in the diagram above. The volume is
increased to 5.0 L as the temperature is held
constant. The pressure of the air in the cylinder is
now P2 . What effect do the volume and pressure
changes have on the average kinetic energy of the
molecules in the sample?
(A) The average kinetic energy increases.
(B) The average kinetic energy decreases.
(C) The average kinetic energy stays the same.
(D) It cannot be determined how the kinetic
energy is affected without knowing P1
and P2 .
Answer:
I used Chat GPT to answer the question here is the answer
Assuming the gas behaves ideally, the answer is (C) The average kinetic energy stays the same.
According to the ideal gas law, PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the ideal gas constant, and T is temperature. If the temperature is held constant, then nR is also constant. Therefore, for a given amount of gas, if V increases, P must decrease (and vice versa) to maintain the same value of PV.
The average kinetic energy of gas molecules is proportional to temperature, so if the temperature is held constant, the average kinetic energy of the gas molecules stays the same. The changes in volume and pressure only affect the density and distribution of the gas molecules, but not their average kinetic energy.
A platinum ring is composed of 2.35×1023 atoms. Calculate the mass of the ring in grams.
The mass of the platinum ring is 76.0 grams.
To calculate the mass of the platinum ringWe need to know the molar mass of platinum and the number of platinum atoms in the ring.
The molar mass of platinum (Pt) is 195.08 g/mol.
The number of platinum atoms in the ring is 2.35×10^23.
Now we can use the following formula to calculate the mass of the ring:
mass = (number of atoms) x (atomic mass) / Avogadro's number
where Avogadro's number is 6.022 x 10^23 mol^-1.
Substituting the values:
mass = (2.35×10^23 atoms) x (195.08 g/mol) / (6.022 x 10^23 mol^-1)
mass = 76.0 g
Therefore, the mass of the platinum ring is 76.0 grams.
Learn more about molar mass here : brainly.com/question/30459977
#SPJ1
A bag of potato chips is sealed in a factory near seal level. The atmospheric pressure is 99.82 kPa. What is the difference in Pa between the pressure in the bag and the atmospheric pressure?
The difference in Pa between the pressure in the bag and the atmospheric pressure is 1.505 kPa.
How to obtain the difference in pressureTo obtain the difference in pressure, we first need to know the atmospheric pressure near sea level. This is 760 mm Hg. When we convert this to pascals, we will have, 101.32472 kPa.
Now, the difference in pressure will be obtained by subtracting the atmospheric pressure in the bag from the atmospheric pressure near sea level and this is:
101.32472 kPa - 99.82 kPa
= 1.505 kPa.
Learn more about pressure here;
https://brainly.com/question/28012687
#SPJ1
Three gases (8.00 g of methane, CH4, 18.0 g of ethane, C2H6 , and an unknown amount of propane, C3H8 ) were added to the same 10.0- L container. At 23.0 ∘C, the total pressure in the container is 3.70 atm. Calculate the partial pressure of each gas in the container.
The partial pressure of each gas are:
Partial pressure of CH₄ is 1.22 atmPartial pressure of C₂H₆ is 1.46 atmPartial pressure of C₃H₈ is 1.02 atmHow do i determine the partial pressure of each gas?First, we shall determine the mole of 8.00 g of methane, CH₄ and 18.0 g of ethane, C₂H₆. Details below:
For methane, CH₄
Mass of CH₄ = 8 g Molar mass of CH₄ = 16 g/mol Mole of CH₄ =?Mole = mass / molar mass
Mole of CH₄ = 8 / 16
Mole of CH₄ = 0.5 mole
For ethane, C₂H₆
Mass of C₂H₆ = 18 g Molar mass of C₂H₆ = 30 g/mol Mole of C₂H₆ =?Mole = mass / molar mass
Mole of C₂H₆ = 18 / 30
Mole of C₂H₆ = 0.6 mole
Next, we shall determine the total mole. Details below:
Volume (V) = 750 mL = 10 LTemperature (T) = 23 °C = 23 + 273 = 296 KPressure (P) = 3.70Gas constant (R) = 0.0821 atm.L/mol KTotal of mole (n) =?PV = nRT
3.70 × 10 = n × 0.0821 × 293
Divide both sides by (0.0821 × 293)
n = (3.70 × 10) / (0.0821 × 293)
n = 1.52 mole
Finally, we shall determine the partial pressure of each gas. Details below:
For methane, CH₄
Mole of CH₄ = 0.5 moleTotal mole = 1.52 moleTotal pressure = 3.70 atmPartial pressure of CH₄ =?Partial pressure = (Mole / total mole) × total pressure
Partial pressure of CH₄ = (0.5 / 1.52) × 3.70
Partial pressure of CH₄ = 1.22 atm
For ethane, C₂H₆
Mole of C₂H₆ = 0.6 moleTotal mole = 1.52 moleTotal pressure = 3.70 atmPartial pressure of C₂H₆ =?Partial pressure = (Mole / total mole) × total pressure
Partial pressure of C₂H₆ = (0.6 / 1.52) × 3.70
Partial pressure of C₂H₆ = 1.46 atm
For propane, C₃H₈
Partial pressure of CH₄ = 1.22 atmPartial pressure of C₂H₆ = 1.46 atmTotal pressure = 3.70 atmPartial pressure of C₃H₈ =?Partial pressure of C₃H₈ = Total pressure - (Partial pressure of CH₄ + Partial pressure of C₂H₆)
Partial pressure of C₃H₈ = 3.7 - (1.22 + 1.46)
Partial pressure of C₃H₈ = 1.02 atm
Learn more about partial pressure:
https://brainly.com/question/15577259
#SPJ1
The Environmental Protection Agency was assigned which task? A. setting standards and governing the cleanliness of water used by Americans B. setting standards and governing the highways and interstates in the United States C. setting standards and governing the use of national parks and monuments in the United States. D. setting standards and governing the civil and commercial air transportation throughout America
Answer:
A. setting standards and governing the cleanliness of water used by Americans
Explanation:
The responsibilities of the Environmental Protection Agency (EPA) is to make sure that:
People in America should have clean air, water, and good quality soil so that land is fertile.Using Scientific information to come up with efforts on a national level and reduce risks to the environment.A fair and effective administration of federal laws centered around the protection of human health and our environment.The total pressure of gas collected over water is 725.0 mmHg and the temperature is 18.0 C what is the pressure of hydrogen gas formed in mmHg
The pressure of hydrogen gas formed is 709.5 mmHg.
Partial pressure is the pressure exerted by a single gas component in a mixture of gases, assuming all other gases are held constant.
In this case, the hydrogen gas is formed by a chemical reaction.
To calculate the partial pressure of hydrogen gas, we need to subtract the vapor pressure of water from the total pressure of the gas collected.
The vapor pressure of water at 18.0 °C is 15.5 mmHg.
Therefore, the partial pressure of hydrogen gas can be calculated as:
Partial pressure of hydrogen gas = Total pressure - Vapor pressure of water
Partial pressure of hydrogen gas = 725.0 mmHg - 15.5 mmHg = 709.5 mmHg
To know more about hydrogen gas here
brainly.com/question/12494649
#SPJ1
Ocean water contains 3.3 % NaCl by mass.
How much salt can be obtained from 234g of seawater?
Answer:
Ans: 8.9 NaCl
Explanation:
Ocean water contains 3.5 nacl by mass how much salt can be obtained from 254 g of seawater
Question: Ocean water contains 3.5% NaCl by mass. How much salt can be obtained from 254g of seawater?
How many hydrogen molecules (h2) are needed to convert the triacylglycerol shown to saturated fat
We would need about 16 hydrogen atoms so that we can convert the compound to a saturated fat.
What is a saturated fat?In animal products like meat and dairy, saturated fat is a form of dietary fat that is normally solid at room temperature. It is known as being "saturated" because each molecule of fat has the most hydrogen atoms possible, giving it a stable structure.
We can see this by counting the number of double bonds in the fat and there are eight of them so sixteen hydrogen atoms are needed for saturation.
Learn more about saturated fat:https://brainly.com/question/29816448
#SPJ1
using the equation PCI5(g) PCI3(g) + CI2(g), if CI2 is added, what way will the euilibeium shift
When an equilibrium system is put under stress, Le Chatelier's principle can be used to forecast changes in equilibrium concentrations.
Thus, The adjustments required to reach equilibrium might not be as obvious if we have a mixture of reactants and products that have not yet reached equilibrium.
In this situation, we can compare the Q and K values for the system to forecast changes.
By adding or withdrawing one or more of the reactants or products, an equilibrium chemical system can be momentarily moved out of equilibrium. After that, additional adjustments are made to the reactant and product concentrations in order to bring the system back to equilibrium.
Thus, When an equilibrium system is put under stress, Le Chatelier's principle can be used to forecast changes in equilibrium concentrations.
Learn more about Equilibirium, refer to the link:
https://brainly.com/question/30147602
#SPJ1
Explain how your model is different from the model in the picture.
My model is distinct from the model in the image in that it takes a more thorough and all-encompassing approach to comprehending the fundamental parts of a system.
It considers the interactions between various system elements as well as the connections between those elements and their surroundings. It also looks at how the system changes over time, and how different components interact with each other.
As a result, the system may be understood more precisely, and management choices can be made with more knowledge. In order to offer a more precise and current picture of the system, my model also integrates the most recent research and technological advancements.
Learn more about elements at:
https://brainly.com/question/14347616
#SPJ1
A pH of 5 is considered to be neutral
Answer:
No,a pH of 5 is slightly acidic,not neutral. A pH of 7 is considered neutral
What best describes the energy in light?
A. It increases as it is absorbed by an atom.
B. It increases as the light moves from violet toward red.
C. It is absorbed and emitted in discrete chunks.
D. It is absorbed when it comes into contact with an object.
C. It is absorbed and emitted in discrete chunks.
The energy in light is carried by particles called photons, which behave both like waves and like particles. According to the theory of quantum mechanics, photons can only be absorbed or emitted in discrete amounts of energy, known as quanta. This means that the energy in light is not continuous, but rather comes in specific packets or chunks. This phenomenon is known as quantization, and it has important implications for many areas of physics, including atomic and molecular physics, as well as the study of electromagnetic radiation.
Answer: C it is absorbed and emitted in descrete chunks.
Explanation:
photons of light are emitted or absorbed as electrons change energy levels
How much H2 gas at STP can be produced by
the reaction
2 Na(s) + 2 H2O(ℓ) −→ H2(g) + 2 NaOH(aq)
of 3.60 g of Na and excess water?
Answer in units of L.
1.71 L of [tex]H^2[/tex] gas can be produced at STP from the given reaction.
To solve this problemAccording to the equation, 1 mole of hydrogen gas [tex]H^2[/tex] is created for every 2 moles of sodium (Na) that react with extra water.
Using the molar mass of Na, we can get the number of moles from the given amount of sodium (3.60 g):
3.60 g Na × (1 mol Na / 22.99 g Na) = 0.157 mol Na
Since the reaction requires 2 moles of Na to produce 1 mole of [tex]H^2[/tex] the number of moles of [tex]H^2[/tex] produced is
0.157 mol Na × (1 mol [tex]H^2[/tex] / 2 mol Na) = 0.079 mol [tex]H^2[/tex]
Now, to calculate the volume of hydrogen gas produced at STP (standard temperature and pressure), we can use the ideal gas law
PV = nRT
Where
The ideal gas constant R = 0.08206 L atm/(mol K) P = 1 atm (since it's at STP) V is the volume we're looking forn = 0.079 mol (from above)T = 273 K (since it's at 0°C)Solving for V, we get:
V = nRT/P = (0.079 mol)(0.08206 L atm/(mol K))(273 K)/(1 atm) = 1.71 L
Therefore, 1.71 L of % [tex]H^2[/tex] gas can be produced at STP from the given reaction.
Learn more about molar mass here : brainly.com/question/21334167
#SPJ1
How much aluminum can be produced from 9.00 ton of Al2O3?
To calculate the amount of aluminum produced from 9.00 tons of Al2O3, we need to use stoichiometry. First, we'll convert the mass of Al2O3 to moles, and then use the balanced chemical equation to find the moles of aluminum. Finally, we'll convert the moles of aluminum back to mass.
1. Convert mass of Al2O3 to moles:
9.00 tons = 9,000 kg
Molar mass of Al2O3 = (2 * 26.98) + (3 * 16.00) = 101.96 g/mol
9,000 kg * (1000 g/kg) = 9,000,000 g
moles of Al2O3 = 9,000,000 g / 101.96 g/mol = 88,258 moles
2. Use balanced chemical equation to find moles of aluminum:
The balanced chemical equation is:
2 Al2O3 → 4 Al + 3 O2
Using stoichiometry, we find the ratio of Al2O3 to Al is 2:4 or 1:2.
moles of Al = 88,258 moles Al2O3 * (2 moles Al / 1 mole Al2O3) = 176,516 moles
3. Convert moles of aluminum back to mass:
Molar mass of Al = 26.98 g/mol
Mass of Al = 176,516 moles * 26.98 g/mol = 4,762,984 g
Mass of Al in tons = 4,762,984 g / (1000 g/kg) / (1000 kg/ton) = 4.76 tons
So, 4.76 tons of aluminum can be produced from 9.00 tons of Al2O3.
For more questions on: aluminum
https://brainly.com/question/30369776
#SPJ11
