Answer:
The mass of oxygen the container must have is 150.85 g.
Explanation:
Given;
mass of the oxygen, m₁ = 44.5 g
initial pressure of the gas, P₁ = 2.3 atm
final pressure of the gas, P₂ = 7.8 atm
Atomic mass of oxygen gas, = O₂ = 16 x 2 = 32 g
initial number of moles of oxygen in the container, n₁ = 44.5/32 = 1.39
let the final number of moles of oxygen = n₂
Apply ideal gas equation;
PV = nRT
[tex]\frac{PV}{Rn} = T\\\\since \ temperature\ T \ is \ constant;\\\\\frac{P_1V}{Rn_1} = \frac{P_2V}{Rn_2}\\\\\frac{P_1}{n_1} = \frac{P_2}{n_2} \\\\n_2 = \frac{n_1P_2}{P_1} \\\\n_2 = \frac{1.39 \times 7.8}{2.3} \\\\n_2 = 4.714 \ moles[/tex]
The mass of the oxygen in grams is calculated as;
m₂ = 4.714 x 32g
m₂ = 150.85 g
Therefore, the mass of oxygen the container must have is 150.85 g.
Which resource is a direct ecosystem service?
O food crops
O fresh water
O biodiversity
O land development
Answer:
Fresh Water is your answer
Fresh water is a direct ecosystem service. Therefore, the correct option is option B among all the given options.
What is ecosystem?An ecosystem, also known as an ecological system, is made up of all the creatures and the physical setting in which they live. The nutrition cycles and energy fluxes connect these both biotic and abiotic elements. Photosynthesis is how energy enter the system and is absorbed by plant tissue.
Animals play a significant part in the transfer of materials and energy through the system by eating plants and one another. They also have an impact on the biomass levels of the microbial and plant communities. Fresh water is a direct ecosystem service.
Therefore, the correct option is option B.
To know more about ecosystem, here:
https://brainly.com/question/29775110
#SPJ2
5. Why are lonic compounds good conductors of electricity?
lone compounds are electrical in nature
"The strong electrostate attraction between lons allow electricity
Aques solutions of lonie compounds cause to dissociate fons
are free to conduct electricity
de electrostate attraction between crystal lattice of
pound is strong which needs high temperature to melt arb
CO Q2 Science ?
Answer:
The options are unclear, however, the correct option is:
Aqueous solutions of ionic compounds cause to dissociate, hence, ions are free to conduct electricity
Explanation:
Ionic compounds are compounds formed from ions (charged atoms). For example, NaCl is an ionic compound from the following ions; Na+ (cation) and Cl- (anion). One characteristics of ionic compounds is their ability to dissociate into the ions that form them when in an aqueous solution i.e. NaCl will dissociate into Na+ and Cl- when in an aqueous solution.
These disssociated ions are free to conduct electricity, hence, making ionic compounds good conductors of electricity.
name the following compounds TeF4
Answer:
Tellurium Fluoride
Explanation:
Which component is missing from the process of photosynthesis?
Carbon Dioxide +
+
Sunlight → Glucose + Oxygen
1-water
2-light energy
3-sugar
4-plants
What are typical characteristics of metals
Answer:
Metals are lustrous, malleable, ductile, good conductors of heat and electricity. Other properties include: State: Metals are solids at room temperature with the exception of mercury, which is liquid at room temperature (Gallium is liquid on hot days).
The temperature of a sample of water in the liquid phase is raised 30 degrees Celsius by the addition of 3762 J. What is the mass of the water in grams?
A. 0.03
B. 0.30
C. 30
D. 300
Tell me, how the different states of matter are different and the same.
Answer:
Gases, liquids and solids are all made up of microscopic particles, but the behaviors of these particles differ in the three phases. Gas are well separated with no regular arrangement. liquid are close together with no regular arrangement. solid are tightly packed, usually in a regular pattern.
Explanation:
Answer these questions. What are metals? Write the position of alkali metals and alkaline earth metals in the modern periodic table.
Explanation:
a metal is an element that readily forms positive ions (cations) and has metallic bonds.
Group two of the periodic table comprises the elements beryllium, magnesium, calcium, strontium, barium and radium. The elements in this group, which are all shiny and silvery-white in appearance, are known as the alkaline earth metals. Like the alkali metals, they form alkaline solutions when they react with water.
HEY COULD SOMEONE HELP ME WITH THIS PLS PLS ITS DUE TODAY PLS
How many grams of CaO can be produced using 3.9 moles CaCO3?1
CaCO3 --> 1CaO + 1CO *
Answer: 218.4 g of [tex]CaO[/tex] will be produced from 3.9 moles of [tex]CaCO_3[/tex]
Explanation:
The balanced chemical equation is:
[tex]CaCO_3\rightarrow CaO+CO_2[/tex]
According to stoichiometry :
1 mole of [tex]CaCO_3[/tex] produce = 1 mole of [tex]CaO[/tex]
Thus 3.9 moles of [tex]CaCO_3[/tex] will produce=[tex]\frac{1}{1}\times 3.9=3.9moles[/tex] of [tex]CaO[/tex]
Mass of [tex]CaO=moles\times {\text {Molar mass}}=3.9moles\times 56g/mol=218.4g[/tex]
Thus 218.4 g of [tex]CaO[/tex] will be produced from 3.9 moles of [tex]CaCO_3[/tex]
218.4 grams of CaO is produced using 3.9 moles CaCO₃.
How we calculate weight of any substance from moles?Moles of any substance will be define as:
n = W / M
Given chemical reaction is:
CaCO₃ → CaO + CO₂
From the above equation it is clear that according to the concept of stoichiometry 1 mole of CaCO₃ is producing 1 mole of CaO. By using above formula we calculate grams as follow:
W = n × M, where
n = no. of moles of CaO = 3.9 moles
M = molar mass of CaO = 56 g/mole
W = 3.9 × 56 = 218.4 g
Hence, 218.4 grams of CaO is produced.
To know more about moles, visit the below link:
https://brainly.com/question/13314627
A student adds an alka-seltzer to the Koolaid and stirs. The pH meter now reads 8.3. What was released by the alka-seltzer tablet to cause this change?
Answer:
It released hydroxide ions (OH ¯).
Explanation:
A PH of 8.3 indicates that the solution has become a basic solution.
Now, for us to have a basic solution from the addition of an alka-seltzer to Koolaid, it means the Alka-seltzer released plenty of hydroxide ons (OH¯) to the solution.
3. Una piedra que se tira verticalmente hacia arriba se mueve según la
leys = 64y - 8t^2, si "s" se mide en pies (ft) y t en segundos, hallar:
a) SU posición y velocidad después de dos segundos y después de tres
segundos.
b) ¿Qué altura alcanzará?
c) ¿A qué distancia se moverá al cabo del cuarto segundo?
Answer:
Explanation:
Para mejor entendimiento, reeescribiremos la ley que pusiste:
S = 64t - 8t² (1)
De acuerdo al enunciado del problema, S tiene unidades de pie y t en segundos, por lo tanto, S, que se refiere a la posición o altura alcanza de la piedra, puede ser determinado usando esa expresión a tiempos específicos.
Para el calculo de velocidad usamos la siguiente expresión:
V = -g * t (2) g: 32.16 ft/s
Tomando en cuenta estas expresiones, veamos los valores de posición y velocidad:
a) Para t = 2 s
S = 64(2) - 8(2)²
S = 96 ft
V = -32.16 * 2
V = -64.32 ft/s
Para t = 3 s
S = 64(3) - 8(3)²
S = 120 ft
V = -32.16 * 3
V = -96.48 ft/s
b) Para saber la altura que alcanzará, usamos la expresión de altura máxima que es la siguiente:
Smáx = -V₀² / 2g (3)
Para el valor de la velocidad inicial, podemos asumir el valor de la velocidad dada por la formula de la ley S, que es 64. Esto porque al ser multiplicado por el valor del tiempo, queda en unidades de distancia, asi que este valor debe tener unidades de velocidad. Reemplazando este valor en la expresión:
Smáx = -(64)² / 2 * 32.16
Smáx = 63.68 ft
c) Para esta parte, usamos nuevamente la formula de la ley S, usando t = 4 s y listo:
S = 64(4) - 8(16)
S = 128 ft
Espero te sirva
What volume of 0.130 M HCl is required for the complete neutralization of 1.30 g of NaHCO3 (sodium bicarbonate)?
Answer: Volume required is 0.115 L or 115 ml
Explanation:
moles of [tex]NaHCO_3[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{1.30g}{84g/mol}=0.015mol[/tex]
The balanced chemical equation is:
[tex]HCl+NaHCO_3\rightarrow NaCl+H_2CO_3[/tex]
1 mole of [tex]NaHCO_3[/tex] requires = 1 mole of HCl
Thus 0.015 mol of [tex]NaHCO_3[/tex] requires = [tex]\frac{1}{1}\times 0.015=0.015[/tex] mole of HCl
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
[tex]Molarity=\frac{n}{V_s}[/tex]
where,
n = moles of solute
[tex]V_s[/tex] = volume of solution in L
[tex]0.130=\frac{0..015}{V_s}[/tex]
[tex]V_s=0.115L[/tex]
Thus volume required is 0.115 l or 115 ml
someone help please this is due today!!?
Answer:
I think beaker three will take longer to boil since there is more water present,compared to the other beakers
In the hot climate, human bodies had to adapt by increasing the number of ____________ on the skin to cool off the body.
A. Body hair
B. Sweat Glands
C. UV rays
D. None of the above
Answer:
body hair
Explanation:
in the hot climate,human bodies had to adapt inscrasing the number of bodyhair on the skin to coll off the body
After the reaction mixture is added to the top of the silica gel column, the instructions state: "Open the stopcock and drain the column until the meniscus is just above the top layer of the material. Add another 0.5 mL of solvent and repeat the process toensure that all of the desired products are adsorbed onto the silica gel. This process ensures that none of the desired products are dissolved in solution above the column."Why is this procedure important? How would the TLC plates look different than your prediction in Q1 if a student skipped this step?
Answer:
Kindly check the explanation section.
Explanation:
Without mincing words let's dive straight into the solution to the question.
The instructions given in the question above is very important as it concerns the total adsorption of the product on the silica gel. The instruction is made so that adsorption of the product is on the silica gel so as to avoid the distortion in polarity of the compound.
Part B.
If the student avoid the step, there would be problem of which the compound which is in mixture will be running out of the column. Also, the compounds won't be made pure.
In summary, for the first part adsorption is done on the silica gel thus, the instructions is to be followed.
For the second part, if the step is not avoided then the Compounds will be made pure if the step
Rank the following compounds in order of increasing stability, putting the least stable first. Group of answer choices II < I < III I < II < III III < II < I III < I < II
Hello. You forgot and show the compounds. The compounds are in the attached image.
Answer:
I < II < III
Explanation:
The stability of the presented compounds must be analyzed, taking into account the free electrons to form arrangements between the atoms. In this case, the molecules of greater stability follow the concept of valence and are characterized as those that manage to reach a large number of elements that manage to obey the octet rule.
What is the major organic product obtained from the reaction of 2,2-dimethyl-1-propanol aqueous HBr at reflux
Answer:
See explanation
Explanation:
The mechanism involves SN1 nucleophilic substitution reaction. The -OH group of the alcohol is first protonated. Since water is a good leaving group, -OH2 leaves the substrate creating a primary carbo cation.
A 1,2 methyl shift now occurs to create a tertiary carbo cation which is more stable leading to the major product shown in the image attached to this answer.
Calculate the number of moles of H2SO4 required to react with 0.93 moles of Al. Do not include units in your answer. Round to the tenths place or further.
Answer:
1.40 moles of H₂SO₄.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below below:
2Al + 3H₂SO₄ —> Al₂(SO₄)₃ + 3H₂
From the balanced equation above,
2 moles of Al reacted with 3 moles of H₂SO₄.
Finally, we shall determine the number of mole of H₂SO₄ required to react with
0.93 moles of Al. This can be obtained as follow:
From the balanced equation above,
2 moles of Al reacted with 3 moles of H₂SO₄.
Therefore, 0.93 moles of Al will react with = (0.93 × 3)/2 = 1.40 moles of H₂SO₄.
Thus, 1.40 moles of H₂SO₄ is needed for the reaction.
Determine the number of molecules of OF2 and moles of fluorine contained in 5.53 moles of OF2.
Answer: [tex]33.31\times 10^{23}[/tex] molecules of [tex]OF_2[/tex]
and 11.06 moles of Flourine
Explanation:
According to avogadro's law, 1 mole of every substance weighs equal to the molecular mass and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
1 mole of [tex]OF_2[/tex] contains= [tex]6.022\times 10^{23}[/tex] molecules of [tex]OF_2[/tex]
Thus 5.53 moles of [tex]OF_2[/tex] contains=[tex]\frac{6.022\times 10^{23}}{1}\times 5.53=33.31\times 10^{23}[/tex] molecules of [tex]OF_2[/tex]
1 mole of [tex]OF_2[/tex] contains= 2 moles of Flourine
5.53 moles of [tex]OF_2[/tex] contains=[tex]\frac{2}{1}\times 5.53=11.06[/tex] moles of Flourine
Is energy absorbed or released during cellular respiration?
Absorbed
Released
Answer:
Released
Explanation:
they convert into a form of energy that can be used by cells
Which word is best used as a synonym for scientific conclusions?
A.
explanations
B.
results
C.
data
D.
observations
Answer:
B
Explanation:
Not C or D becuase it is data would not show a conclusion and observations does show the conclsuion of the scientists. Not A becuase explanation does not mean they have data to support their conclusion. Therefore, it would be B becuase results show what was the effect of something and is often supported with data
Hope that helped :)
Kinetic energy is the energy of motion. How could a person determine how much kinetic energy an object has?
A. by finding its position and form
B. by finding its speed and direction
C. by finding its height and width
D
by finding its mass and speed
Reset
Submit
Answer:
B. by finding its speed and direction
Kinetic energy is the energy an object has due to its motion. As long as an object is moving at the same velocity, it will maintain the same kinetic energy. The kinetic energy of an object is calculated from the velocity and the mass of the object.
Imagine blowing up a latex balloon. Assume that you tie the balloon to prevent air from escaping and then squeeze the balloon with one hand, so there is less space inside it. Then assume you use both hands (and maybe a friend’s hands) to squeeze the balloon so there is even less space inside. What do you think will happen to the balloon if you keep squeezing it to a smaller and smaller volume? Explain your prediction.
Answer:
Balloon will burst
Explanation:
The amount of volume that can be held by the latex will reduce yet the volume of air inside does not change. therefore the air inside will force the latex to break.
Assume that you tie the balloon to prevent air from escaping and then squeeze the balloon with one hand, so there is less space inside it then balloon will burst.
What is latex balloon?
latex is what latex balloons are made of. Due to tiny microscopic holes in the latex, it is porous and does not hold helium for as long as foil balloons (mylar balloons).
While latex balloons usually float for only 8–24 hours, foil balloons typically float for 4–21 days. But you can actually get a latex balloon to float longer than a foil balloon by using a product called hi-float, which extends the life of a latex balloon by 25 times the average float time.
In addition to being available in a variety of colors and prints in sizes ranging from 5" to 3 feet, latex balloons can also be printed in many colors, however if you want a detailed design you really need to use foil balloons.
Therefore, Assume that you tie the balloon to prevent air from escaping and then squeeze the balloon with one hand, so there is less space inside it then balloon will burst.
To learn more about latex balloon, refer to the link:
https://brainly.com/question/29058376
#SPJ2
Is nitric acid a strong or weak acid. Explain your answer.
Answer:
Examples of strong acids are hydrochloric acid (HCl), perchloric acid (HClO4), nitric acid (HNO3) and sulfuric acid (H2SO4). A weak acid is only partially dissociated, with both the undissociated acid and its dissociation products being present, in solution, in equilibrium with each other.
Explanation:
Hope this helps you
8. Label the type and parts of the waves shown here.
longitudinal wave
WORD BANK
engitudinal wave
• transverse wave
compression
• rarefaction
crest
trough
Houghton Mifflin Harcourt
It refers to the number of waves produced in one second.
Answer/Explanation:
f is the number of waves produced by a source per second, it is measured in hertz (Hz). T is the time it takes for one complete oscillation, it is measured in seconds. All waves, including sound waves and electromagnetic waves, follow this equation. A radio wave has a time period of 0.0000003333333 seconds.
complete the equation C14H30 = ________ + C7H14
Answer:
C14H30 -----> C7H14 + C2H4 +C5H10
Explanation:
1 In general, how many major glands are found in human body?
A. Eight
B. Ten
C! Thirty-two,
D. Forty six
Answer:
A. Eight
Explanation:
Although there are eight major endocrine glands scattered throughout the body, they are still considered to be one system because they have similar functions, similar mechanisms of influence, and many important interrelationships.
which is an example of conduction?
Answer:
i think its b
Explanation:
