A pushing force acts on a toy car for 3 seconds causing it to accelerate at a rate A’. If the car is replaced with a similar, but larger toy of 2 times greater mass and the same pushing force is applied for the same amount of time, the acceleration of the larger toy car will be

Answers

Answer 1

Answer:

one-half of A'

Explanation:

Answer 2

Answer:

C

Explanation:

EDGE 2021


Related Questions

An inventor claims to have invented a heat engine that receives 750kJ of heat from a source at 400K and produces 250kJ of net work while rejecting the waste heat to a sink at 300K. Is this a reasonable claim

Answers

Answer:

the claim is not valid or reasonable.

Explanation:

In order to test the claim we will find the maximum and actual efficiencies. maximum efficiency of a heat engine can be found as:

η(max) = 1 - T₁/T₂

where,

η(max) = maximum efficiency = ?

T₁ = Sink Temperature = 300 K

T₂ = Source Temperature = 400 K

Therefore,

η(max) = 1 - 300 K/400 K

η(max) = 0.25 = 25%

Now, we calculate the actual frequency of the engine:

η = W/Q

where,

W = Net Work = 250 KJ

Q = Heat Received = 750 KJ

Therefore,

η = 250 KJ/750 KJ

η = 0.333 = 33.3 %

η > η(max)

The actual efficiency of a heat engine can never be greater than its Carnot efficiency or the maximum efficiency.

Therefore, the claim is not valid or reasonable.

what is the mass of an object that is accelerating at 15 m/s when a force of 2000N is exerted

Answers

Answer:

133.33 kg

Explanation:

The mass of an object can be found by using the formula

[tex]m = \frac{f}{a} \\ [/tex]

f is the force

a is the acceleration

From the question we have

[tex]m = \frac{2000}{15} = \frac{400}{3} \\ = 133.3333[/tex]

We have the final answer as

133.33 kg

Hope this helps you

Fast and safe heart rate for workouts is called muscular strength? True or false

Answers

Answer:

False

Explanation:

Answer:

false :3

hope this helps

An elevator is pulled up by a cable with a force of 65,000 N. The upward acceleration of the elevator is 1.8 m/s/s. What is the mass of the elevator?
a. 1.8 kg.
b. 1700 kg.
c. 54880 kg.
d. 5600 kg.
e. 36111 kg.

Answers

Answer:

36111 kg

Explanation:

Given

Force = 65000N

Acceleration = 1.8m/s²

Required

Determine the mass of the elevator

This question will be answered using the following Force formula.

Force = Mass * Acceleration

Substitute values for Force and Acceleration

65000N = Mass * 1.8m/s²

Make Mass the subject

Mass = 65000N/1.8m/s²

Mass = 36111.11 kg

From the list of given options, option E answers the question.

Define SI system of measurement.

Answers

Answer:

SI system - a complete metric system of units of measurement for scientists; fundamental quantities are length (meter) and mass (kilogram) and time (second) and electric current (ampere) and temperature (kelvin) and amount of matter (mole) and luminous intensity (candela); "Today the United States is the only country

Explanation:

hope this helps u, sorry if it doesn't.

Answer:

International System of Units (SI), French Système International d'Unités, international decimal system of weights and measures derived from and extending the metric system of units. Adopted by the 11th General Conference on Weights and Measures (CGPM) in 1960, it is abbreviated SI in all languages

How much thermal energy (in kcal) is required to change a 43 g ice cube from a solid at - 16.5 oC to steam at 11.5 oC above boiling

Answers

Answer:

The total thermal energy required  is 8.93 Kcal

Explanation:

Given;

mass of the ice cube, m = 43 g

specific heat capacity of water, Cp = 4.18 J/gc

specific latent heat of fusion of ice, Cf = 334 J/g

First step, determine the heat needed to raise the temperature of the ice from -16.5 °C to 0° C

Q₁ = mCp[0 - (-16.5)]

Q₁ = 43 x 4.18(16.5)

Q₁ = 2965.71 J

Second step, determine the latent heat of fusion of ice at 0°C

Q₂ = mCf

Q₂ = 43 x 334

Q₂ = 14362 J

Third step, determine the quantity of heat required to raise the temperature of the water initially at 0°C to above 11.5 °C of boiling point of water.

The final temperature of the water = 11.5 °C + 100° C = 111.5 °C

Q₃ = mCp Δθ

Q₃ = 43 x 4.18 (111.5 - 0)

Q₃ = 20041 J

Total thermal energy required = Q₁ + Q₂ + Q₃

Total thermal energy required =  2965.71 J + 14362 J +  20041 J

Total thermal energy required = 37,368.71 J

Total thermal energy required = 8.93 Kcal

Suppose that the potential energy of a body at a certain height is 200 J. If the body falls, what is its kinetic energy just as it reaches the ground?

Answers

Answer:

200j

Explanation:

The kinetic energy just as it reaches the ground is 200J.

What is Potential energy?

Potential energy is defined as the energy stored within an object that exists as a result of the state, position or arrangement of the object. It is one of the two primary forms of energy while the other is kinetic energy. The stored energy is released when there is a change in the state, position or arrangement of the object.

This is the stored energy which depends upon the relative position of various parts of a system such as a spring has more potential energy when it is compressed or stretched.

Initially the potential energy of the body is 200 J but when it is released, its potential energy is converted into kinetic energy. When the body just touches the ground, the kinetic energy becomes equal to the potential energy.

Thus, the kinetic energy just as it reaches the ground is 200J.

Learn more about Potential energy, here:

https://brainly.com/question/24284560

#SPJ2

Select all that apply. The spectrum of Star Y is compared to a reference hydrogen spectrum. What can be concluded about Star Y? Reference (normal) Hydrogen Spectrum Star Y I 500 550 600 650 700 750 400 450 9200 OdyssepWare, Ing. Star Y is showing radial motion Star Y is moving away from the Earth Star Y is moving toward the Earth Star Y is showing transverse motion​

Answers

Answer:

Star Y is showing radial motion

Star Y is moving toward the Earth

Explanation:

Just answered this question on a quiz and got it right.

Star Y is showing radial motion

Star Y is moving towards earth.

What is a spectrum ?

Spectrum is defined as the arrangement of radiations emitted by atoms or molecules based on their characteristic wavelength and frequency.

Here,

The spectrum of the star Y is given and is compared to a reference hydrogen spectrum. The range of wavelengths of the star is given. The spectrum of the star shows that the wavelengths are shifted such that from longer wavelengths to shorter wavelength. This phenomenon of shift in wavelengths from higher to lower is known as blue shift. The star shows blue shift that means shifted to shorter wavelength or it can be said as shifted from lower frequency to higher frequency. As a result, it can be concluded that the star Y is moving towards the earth which implies Star Y is showing radial motion.

Hence,

The star Y is showing radial motion.

Star Y is moving towards the earth.

To learn more about spectrum, click:

https://brainly.com/question/6562844

#SPJ7

I'll give brainliest if you give me a good awnser. :)

A football player kicks a ball with a force of 50 N. Find the impulse on the ball if his foot stays in contact with the football for 0.01 second.

Answers

Answer:

0.5

Explanation:

50x0.01=0.5
The answer is 0.5! I hope this helps you out!!

PLS HURRY!!!! 15 PTS!!! The pictures represent three different states of matter.
Which order of pictures places molecules with the most
amount of motion to the least amount of motion?
O X Y Z
O ZYX
O Y Z
O Y - X - Z

Answers

Xyz I think!
I’m so sorry if I’m wrong!!!

What is the highest order dark fringe, , that is found in the diffraction pattern for light that has a wavelength of 575 nm and is incident on a single slit that is 1410 nm wide?

Answers

Answer:

The highest order dark fringe is 2

Explanation:

From the question we are told that

   The wavelength is  [tex]\lambda = 575 \ nm = 575 *10^{-9} \ m[/tex]

    The width is of the slit is  [tex]d = 1410 nm = 1410 *10^{-9} \ m[/tex]

Generally the highest order dark fringe  is mathematically represented as

       [tex]m = \frac{w}{\lambda }[/tex]

=>     [tex]m = \frac{ 1410 *10^{-9}}{ 575 *10^{-9} }[/tex]

=>     [tex]m =2[/tex]

where was the position of the singularity before the big bang ?​

Answers

.........? Wot do you m e a n

An archer shoots an arrow. Consider the action force to be the bowstring against the arrow. The reaction to this force is the:_____________

a. friction of the ground against the archer's feet.
b. grip of thhe archer's hand on the bow.
c. arrow's push against the bowstring.
d. combined weight of the arrow and bowstring
e. air resistance against the bow arrow.

Answers

Answer:

c. arrow's push against the bowstring.

Explanation:

Newtons third law of motion describe the relationship between action and reaction forces. Thus when the action force is applied by the bowstring against the arrow, a reaction to this force is supplied by the arrow's push against the bowstring.

If these two forces are not equal and opposite, the arrow would not move as expected. The elastic property of the bowstring propels the arrow at a rate which is due to the potential energy it has gained due to the stretching force.

Please help! ASAP. I'm going to have a panic attack.

Answers

Answer:

dont die bro

Explanation:

Suppose an electric eel develops a potential difference of 450 V driving 0.80 A during a 1.0 ms pulse. What is the power output of the eel during this pulse

Answers

Answer:

The power output is  [tex]P = 360 \ W[/tex]  

Explanation:

From the question we are told that

  The potential difference developed is  [tex]V = 450 V[/tex]

  The current is [tex]I = 0.80 \ A[/tex]

  The duration of the pulse is  [tex]\Delta t = 1.0 ms = 1,0 *10^{-3} \ s[/tex]

Generally the power output of the eel during the pulse is mathematically represented as

      [tex]P = V * I[/tex]

=>    [tex]P = 450 * 0.80[/tex]  

=>    [tex]P = 360 \ W[/tex]  

a (n) net is the overall force on a object

Answers

Answer:

net force

Explanation:

The net force is the vector sum of all the forces acting on an object.

how can we show the magnetic force of a magnet illustrate with an example​

Answers

Answer:

take some sharp mixture of iron spread it from up the magnet you will see the magnetic field of magnet

insulator allows the electric current to pass through it true or false please anyone please please please​

Answers

I say the answer is eating chicken. Eating chicken provides many nutrients such as, protein, diabetes, and somminilla.

A block, whose mass is 0.500 kg, is attached to a spring with a force constant of 126 N/m. The block rests upon a frictionless, horizontal surface. A block labeled m is attached to the right end of a horizontal spring, and the left end of the spring is attached to a wall. The spring is stretched horizontally such that the block is displaced by a distance A to the right of its equilibrium position. The block is pulled to the right a distance A = 0.120 m from its equilibrium position (the vertical dashed line) and held motionless. The block is then released from rest. (a) At the instant of release, what is the magnitude of the spring force (in N) acting upon the block? N (b) At that very instant, what is the magnitude of the block's acceleration (in m/s2)? m/s2 (c) In what direction does the acceleration vector point at the instant of release?

Answers

Answer:

(a) F = 15.12 N

(b) a = 30.24 m/s²

(c) To Left

Explanation:

(a)

The magnitude of the spring force is given by Hooke's Law as follows:

F = kx

where,

F = Spring Force = ?

k = Spring Constant = 126 N/m

x = Displacement = A = 0.12 m

Therefore,

F = (126 N/m)(0.12 m)

F = 15.12 N

(b)

The magnitude of acceleration can be found by comparing the spring force with the unbalanced force formula of Newton's Second Law:

F = ma

where,

F = Spring Force = 15.12 N

m = mass of block = 0.5 kg

a = magnitude of acceleration = ?

15.12 N = 0.5 kg (a)

a = 15.12 N/0.5 kg

a = 30.24 m/s²

(c)

Since, the acceleration is always directed towards mean (equilibrium) position in periodic motion. Therefore, the direction of the acceleration at the time of release will be to left.

What part of the body acts as levelers

Answers

Answer: your feet are the foundation! Even though all your body parts are connected and affect one another, your feet are what we at Foot Levelers call, the "foundation".

Explanation:

A person who weighs 670 N steps onto a spring scale in the bath- room, and the spring compresses by 0.79 cm. (a) What is the spring con- stant

Answers

Answer:

The spring constant is 84,810.13 N/m

Explanation:

Given;

applied force on the spring scale, f = 670 N

extention of the spring, x = 0.79 cm = 0.0079 m

Apply Hook's law to determine the spring constant;

f = kx

where;

f is the applied force

k is the spring constant

x is the is the extension

k = f / x

k = 670 / 0.0079

k = 84,810.13 N/m

Therefore, the spring constant is 84,810.13 N/m

When are zeros significant when found to the trailing (to the right) of the decimal point?

Answers

Answer:

Usually, zeroes are found to the right of a decimal point in significant numbers if you have something like [tex]7\frac{1}{100000000000000000000000000}[/tex] (exaggerated example of course), which is when you have a number that is very very close to the integer before it, but isn't that integer.

2 examples of where ground water comes from

Answers

Answer: Example of ground water

Explanation: Groundwater is part of the hydrologic cycle, originating when part of the precipitation that falls on the Earth's surface sinks (infiltrates) through the soil and percolates (seeps) downward to become groundwater.

Floor because it’s from the nature flooor

A boat can travel 2.30 m/s in still water. If the boat points its prow directly across a stream whose current is 1.80 m/s , what is the magnitude of the velocity of the boat relative to the shore?

Answers

Answer:

A boat can travel 2.30 m/s in still water. (a) If the boat points its prow directly across a stream whose current is. ... (a) What is the velocity (magnitude and direction) of the boat relative to the shore? ... The boat's velocity with respect to the shore, , is the sum of its velocity with respect to the water

Explanation:

A 14000 kg tank moving at 9 m/s is brought to a halt in 2.5 s by a reinforced-steel tank barrier. What magnitude of the impulse was imparted to the tank

Answers

Answer

The value is  [tex]I = 126000 \ kg \cdot m/s[/tex]

Explanation

From the question we are told that

  The mass of the tank is   [tex]m = 14000 \ kg[/tex]

   The speed is  [tex]u = 9 \ m/s[/tex]

   The duration taken to bring it to a stop is  [tex]\Delta t = 2.5 \ s[/tex]

Generally the impulse that was imparted on the tank is mathematically represented as

         [tex]I = m (u - v )[/tex]

Generally the v is the final velocity of the tank which is  v = 0 m/s , given that it was brought to rest

So

       [tex]I = 14000 (9 - 0 )[/tex]

=>    [tex]I = 126000 \ kg \cdot m/s[/tex]

Impulse is defined as the mass and change of velocity. The magnitude of the impulse was imparted to the tank 126000 Kg m/sec.

What is impulse?

The force which acts on the body for a short interval of time is known as the impulsive force. The impulsive force is defined as the product of force and the duration for the force is applied.

It is denoted by I. Its unit is kgm/sec.

m is the mass of the tank =  14000 kg

v is the final speed = 9 m/s

u is the initial speed =0

t is the time interval = 2.5 sec.

The formula for impulse is given as ;

[tex]\rm I=\frac{m(v-u)}{t} \times t \\\\ \rm I=m(v-u) \\\\ \rm I=14000(9-0)\\\\\rm I= 126000 \;kgm/sec[/tex]

Hence the magnitude of the impulse was imparted to the tank 126000 Kg m/sec.

To learn more about the impulse refer to the link;

https://brainly.com/question/904448

How is mass-energy equivalence demonstrated in the Sun?

Hydrogen nuclei fuse to form a larger nucleus, and a small amount of mass is converted into energy.
Hydrogen nuclei fuse to form a larger nucleus by absorbing a large amount of energy and converting it into a small amount of mass.
Hydrogen nuclei form from smaller nuclei, and a small amount of mass is converted into energy.
Hydrogen nuclei form from smaller nuclei by absorbing a large amount of energy and converting it into a small amount of mass.

Answers

Answer:

Explanation:

Hydrogen nuclei fuse to form a larger nucleus, and a small amount of mass is converted into energy.

The mass difference between a helium nucleus and four hydrogen nuclei is 0.7%; this mass difference is transformed into energy during the fusion process. Each mole of He42 created as a result of this reaction generates around 3.6 1011 kJ of energy. Thus, option A is correct.

What Hydrogen nuclei fuse to form a larger nucleus?

Hydrogen is exhausted during the fusion of hydrogen nuclei, which creates helium and energy. The process's fuel is hydrogen. The star's core condenses and heats up further as the hydrogen is consumed.

For instance, 0.645% of the mass is lost during the fusion of two hydrogen atoms to create helium in the form of electromagnetic radiation or the kinetic energy of an alpha particle. Even those of the lightest element, hydrogen, require a significant amount of energy to get their nuclei to fuse.

Due to this, heavier and heavier elements are encouraged to fuse together, eventually creating all the elements up to iron.

Therefore, Hydrogen nuclei fuse to form a larger nucleus, and a small amount of mass is converted into energy.

Learn more about Hydrogen nuclei here:

https://brainly.com/question/4185579

#SPJ2

An arrow in a bow has 357 J of elastic potential energy How much Winette enere
Will the arrow have after it has been shot assuming there is no sir restoran

Answers

Answer:

357 J

Explanation:

The elastic potential energy of arrow in the stretched bow is 357 J.

The kinetic energy of the arrow after it has been shot is given by half of the product of the arrow's mass and velocity of the arrow.

Here there are no other forms of energy at play here. Only potential and kinetic energy.

As we know that in any system the energy is conserved accordingly the elastic potential energy of the arrow will be equal to the kinetic energy of the bow after it is released i.e., 357 J.

describe how you would measure the diameter of a tennis ball​

Answers

You would use a vernier calliper. Take measurements at different angles and take an average.

Hurry please

The distance from wave to wave is called what

Answers

Answer:

Wavelength

Explanation:

The answer to your question is wavelength! Hope this helps have a great day

A wheel accelerates with a constant angular acceleration of 4.5 rad/s2. If the initial angular velocity is 1.0 rad/s, what is the angle the wheel rotates through in 2.0 s?

Answers

Answer:

The angle which the wheel rotates through in 2 seconds is   [tex]\theta =11 \ radians[/tex]

Explanation:

From the question we are told that

    The constant angular acceleration of the wheel is [tex]\alpha = 4.5 rad/s^2[/tex]  

     The initial angular velocity of the wheel is  [tex]w_1 = 1.0 \ rad/s[/tex]

     The time duration considered is  [tex]t = 2.0 \ s[/tex]

Generally from kinematic equation we have that

      [tex]\theta = w_1 t +\frac{1}{2} \alpha t^2[/tex]

=>   [tex]\theta = 1.0 * 2 +\frac{1}{2} * 4.5 * 2^2[/tex]

=>   [tex]\theta =11 \ radians[/tex]

Other Questions
As a person cycling increases speed, the rate of calorie burned, distance traveled, and energy expended also increase. Which of the following is the independent variable?Please explain why you chose this answer to better understand. a. Calories b. Energy c. Distance d. Speed 8) What was Georgia's role in the fight between South Carolina and Spain?9) Why was the war of Jenkins ear important? A pasta factory made 3.84 pounds of pasta in 4 minutes. How much pasta did the factory make in each minute? plzz help me Read the sentences and choose the best answer 1. The global warming ... Continue to get worse a. Is going to b. Will c. Both are correct 2. If you are hungry, i .... Make you a sandwich a. Am going to b. Will c. Both are correct please help me Solve s = r for pls help me solve Help Ill mark you brainly ! NEED HELP ASAP NEXT QUATER IS TODAYTwo bags of cereal are packed in a box. The total weight of the box and the two bags of cereal is 50.00 ounces. One bag of cereal weighs 14.06 ounces, the other weighs 20.15 ounces. How much does the box weigh? (2 points)15.79 ounces15.22 ounces15.25 ounces14.89 ounces Plz HURRY!!!Which multiplication expression can be used to check this division problem: 2/5 divided by 4/15 = 3/2O 2/5 times 4/15O 3/2 times 4/15O 3/2 times 15/4O 5/2 times 15/4 What was one effect of the French and Indian War on Great Britain's Americancolonies?O A. Great Britain punished the colonists for supporting France.B. Great Britain expected the colonists to pay higher taxes.O C. Great Britain forced the colonists to expand into new lands.D. Great Britain refused to use its troops to defend the colonists. PLEASE HELP!!!!1) Is Sulfur a metal or nonmetal? _______________________2) Which family is Calcium in? _________________________3) What is the Elements name for the element that has the atomic number 72?_______________________________________________________________4) What is the atomic mass of Thallium? _________________________5) What are all the atomic symbols for the Noble gases?__________________________________________________________________________________________________________________________________________________________________________________________________________________6) What are all the Elements names in the metalloids?__________________________________________________________________________________________________________________________________________________________________________________________________________________7) What are all the atomic masses for the Actinides?__________________________________________________________________________________________________________________________________________________________________________________________________________________8)How many protons does Arsenic have? __________________9) How many electrons does Radium have? ________________10) How many neutrons does Nickel have? ________________ and Python code for the following programming problem and the pseudo code below Write a modular program that will calculate the cost of purchasing a meal. The Python program can use global or local variables and RAPTOR use global variables. This program will include decisions and loops. Details of the program are as follows: Your menu items only include the following food with accompanied price: o Yum Yum Burger = .99 o Grease Yum Fries = .79 o Soda Yum = 1.09 Allow the user of the program to purchase any quantity of these items on one order. Allow the user of the program to purchase one or more types of these items on one order. After the order is placed, calculate total and add a 6% sales tax. Print to the screen a receipt showing the total purchase price. Your sample output might look as follows: Enter 1 for Yum Yum Burger Enter 2 for Grease Yum Fries Enter 3 for Soda Yum Enter now ->1 Enter the number of burgers you want 3 Do you want to end your order? (Enter yes or no): no Enter 1 for Yum Yum Burger Enter 2 for Grease Yum Fries Enter 3 for Soda Yum Enter now ->3 Enter the number of sodas you want 2 Do you want to end your order? (Enter yes or no): no Enter 1 for Yum Yum Burger Enter 2 for Grease Yum Fries Enter 3 for Soda Yum Enter now ->1 Enter the number of burgers you want 1 Do you want to end your order? (Enter yes or no): no Enter 1 for Yum Yum Burger Enter 2 for Grease Yum Fries Enter 3 for Soda Yum Enter now ->2 Enter the number of fries you want 2 Do you want to end your order? (Enter yes or no): yes The total price is $ 8.1832 Do you want to end program? (Enter no to process a new order): no Enter 1 for Yum Yum Burger Enter 2 for Grease Yum Fries Enter 3 for Soda Yum Enter now ->2 Enter the number of fries you want 2 Do you want to end your order? (Enter yes or no): no Enter 1 for Yum Yum Burger Enter 2 for Grease Yum Fries Enter 3 for Soda Yum Enter now ->3 Enter the number of sodas you want 2 Do you want to end your order? (Enter yes or no): yes The total price is $ 3.9856 Do you want to end program? (Enter no to process a new order): yes The Pseudo code is: Module main() Call declareVariables(endProgram, endOrder, totalBurger, totalFry, totalSoda, total, tax, subtotal, option, burgerCount, fryCount, sodaCount) //Loop to run program again While endProgram == "no" Call resetVariables(totalBurger, totalFry, totalSoda, total, tax, subtotal) //Loop to take in order While endOrder == "no" Display "Enter 1 for Yum Yum Burger" Display "Enter 2 for Grease Yum Fries" Display "Enter 3 for Soda Yum" Input option If option == 1 Then Call getBurger(totalBurger, burgerCount) Else If option == 2 Then Call getFry(totalFry, fryCount) Else If option == 3 Then Call getSoda(totalSoda, sodaCount) End If Display "Do you want to end your order? (Enter no to add more items: )" Input endOrder End While Call calcTotal(burgerTotal, fryTotal, sodaTotal, total, subtotal, tax) Call printReceipt(total) Display "Do you want to end the program? (Enter no to process a new order)" Input endProgram End While End Module Module declareVariables(String Ref endProgram, String Ref endOrder, Real Ref totalBurger, Real Ref totalFry, Real Ref totalSoda, Real Ref total, Real Ref tax, Real Ref subtotal, Real Ref option, Real Ref burgerCount, Real Ref fryCount, Real Ref sodaCount) Declare String endProgram = "no" Declare String endOrder = "no" Declare Real totalBurger = 0 Declare Real totalFry = 0 Declare Real totalSoda = 0 Declare Real total = 0 Declare Real tax = 0 Declare Real subtotal = 0 Declare Integer option = 0 Declare Integer burgerCount = 0 Declare Integer fryCount = 0 Declare Integer sodaCount = 0 End Module Module resetVariables (Real Ref totalBurger, Real Ref totalFry, Real Ref totalSoda, Real Ref total, Real Ref tax, Real Ref subtotal) //reset variables totalBurger = 0 totalFry = 0 totalSoda = 0 total = 0 tax = 0 subtotal = 0 End Module Module getBurger(Real Ref totalBurger, Integer burgerCount) Display "Enter the number of burgers you want" Input burgerCount Set totalBurger = totalBurger + burgerCount * .99 End Module Module getFry(Real Ref totalFry, Integer fryCount) Display "Enter the number of fries you want" Input fryCount Set totalFry = totalFry + fryCount * .79 End Module Module getSoda(Real Ref totalSoda, Integer sodaCount) Display "Enter the number of sodas you want" Input sodaCount Set totalSoda = totalSoda + sodaCount * 1.09 End Module Module calcTotal(Real totalBurger, Real totalFry, Real totalSoda, Real Ref total, Real subtotal, Real tax) Set subtotal = totalBurger + totalFry + totalSoda Set tax = subtotal * .06 Set total = subtotal + tax End Module Module printReceipt(Real total) Display "Your total is $", total End Module How does the monkeys paw story end? please help!!!I dont understand Pls help me I have no idea What is the interquartile range of the numbers 9, 28, 16, 2, 33, 6, 10 Is (2, 2) a solution of the inequality y < 3x - 5? List 5 benefits of breastfeeding to mothers and infants. Which one of the following is the infective stage of the Malarial Parasite?A- TrophozoiteB- SporozoiteC- SchigozoiteD-Sporoblast I bought a car of 650,000 andsold it for 520,000. Find thelost Percent ? HELP ME WITH THIS I'LL GIVE THE BRAINLIEST.For items 6 to 9, use illustration on long division that follows:6. Which is the dividend?A. 5x + 5B. 5x -5C. 25x2 - 50x +25D.O7. What is the remainder?A. 5x + 5B.X + 5C. -5D.O8. Which is the quotient?A. 5x + 5B. 5x -5C. 5x + 14x-24D.O9. What is the process used to obtain the 2nd line?A. Multiplying 5x by (5x-5)C. Dividing 5x by (5x -5)B. Adding 5x by (5x-5)D. Subtracting 5x by (5x -5)