The total magnetic flux through the cylinder is zero.
To determine the magnetic flux through the cylinder, we can use the formula:
Φ = ∫ B · dA
where Φ is the magnetic flux, B is the magnetic field, and dA is an
infinitesimal area element.
Since the wire is placed along the axis of the cylinder, the magnetic field
will have a constant magnitude along any circle with the same radius as
the wire. The magnitude of the magnetic field at a distance r from the
wire is given by:
B = μ₀I/(2πr)
where μ₀ is the permeability of free space, I is the current in the wire, and r is the distance from the wire.
To determine the total magnetic flux through the cylinder, we need to
integrate the magnetic field over the surface of the cylinder. We can use
cylindrical coordinates for this integration, with the z-axis along the axis of the cylinder.
The infinitesimal area element in cylindrical coordinates is given by:
dA = r · dz · dθ
where r is the radius of the circle, dz is the infinitesimal height element,
and dθ is the infinitesimal angle element.
Since the wire is placed along the z-axis, the magnetic field will be
perpendicular to the area element dA, so we only need to consider the
component of the magnetic field that is perpendicular to the surface of
the cylinder. This component is given by:
B·cos(θ) = μ₀I/(2πr) · cos(θ)
where θ is the angle between the vector pointing from the wire to the
surface element and the z-axis.
Integrating over the surface of the cylinder, we have:
Φ = ∫∫ B·cos(θ) · r · dz · dθ
= ∫₀²π ∫₀⁰⁵ B·cos(θ) · r · dz · dθ
= ∫₀²π ∫₀⁰⁵ μ₀I/(2πr) · cos(θ) · r · dz · dθ
= μ₀I/2π ∫₀²π ∫₀⁰⁵ cos(θ) · dz · dθ
= μ₀I/2π ∫₀²π 0 · dθ
= 0
for such more question on magnetic flux
https://brainly.com/question/18597382
#SPJ11
what would the electron orbits be if the initial velocity of the electrons was 45 deg to the magnetic field? assume the initial speed of the electrons is v
The electron orbits would be circular with a radius of
[tex]r = mv/( qB)[/tex],
where v is the initial speed of the electrons and q is the charge of the electron, and the direction of the electron orbits would be perpendicular to the magnetic field and in the plane perpendicular to the initial velocity of the electrons.
The motion of a charged particle in a magnetic field is given by the Lorentz force equation:
[tex]F = qvB sin(θ)[/tex]
where F is the force on the charged particle, q is the charge of the particle, v is the velocity of the particle, B is the magnetic field, and θ is the angle between the velocity of the particle and the magnetic field.
Since the force is perpendicular to the velocity, it causes the electrons to move in a circular path around the magnetic field. The radius of this circular path is given by:
[tex]r = mv/(qB)[/tex]
where m is the mass of the electron.
Therefore, the electron orbits would be circular with a radius of
[tex]r = mv/(qB),[/tex] where v is the initial speed of the electrons and q is the charge of the electron. The direction of the electron orbits would be perpendicular to the magnetic field and in the plane perpendicular to the initial velocity of the electrons.
for such more questions on initial speed
https://brainly.com/question/24493758
#SPJ11
if the ball hits olaf and bounces off his chest horizontally at 7.10 m/s in the opposite direction, what is his speed vf after the collision? express your answer numerically in meters per second.
Based on the given information, we can assume that Olaf is at rest before the collision with the ball. Therefore, the initial velocity (vi) of Olaf is 0 m/s.
Using the conservation of momentum principle, we can say that the momentum before the collision is equal to the momentum after the collision.
Initial momentum before the collision = Final momentum after the collision
Since Olaf is at rest before the collision, the initial momentum is 0.
Final momentum after the collision = (mass of Olaf) x (final velocity of Olaf)
The mass of Olaf is not given in the question, so we cannot solve for it. However, we can use the information given about the ball's velocity after the collision to find Olaf's final velocity.
The ball bounces off Olaf's chest horizontally at 7.10 m/s in the opposite direction. This means that the ball's velocity after the collision is -7.10 m/s.
Using the conservation of momentum principle:
Initial momentum = Final momentum
0 = (mass of Olaf) x (final velocity of Olaf) + (mass of ball) x (final velocity of ball)
We can assume that the mass of the ball is negligible compared to Olaf's mass, so we can simplify the equation to:
0 = (mass of Olaf) x (final velocity of Olaf) + 0
0 = (mass of Olaf) x (final velocity of Olaf)
Since the mass of Olaf is unknown, we cannot solve for it. However, we can solve for Olaf's final velocity:
(final velocity of Olaf) = 0 m/s
Therefore, Olaf's final velocity after the collision is 0 m/s.
To know more about conservation of momentum principle:
https://brainly.com/question/7958679
#SPJ11
A toy dart gun contains a spring with a spring constant of 220 N/m. A 0.069 kg dart is pressed 0.07 m into the gun. If the dart got stuck to the spring with what angular frequency will the dart oscillate (neglect friction)?
The dart will oscillate with an angular frequency of approximately 56.47 rad/s.
In physics, angular frequency "ω" is a scalar measure of rotation rate. It refers to the angular displacement per unit time or the rate of change of the phase of a sinusoidal waveform, or as the rate of change of the argument of the sine function.
To find the angular frequency with which the dart oscillates, we can use the spring constant, the mass of the dart, and the equation for angular frequency.
Step 1: Identify the spring constant (k) and the mass of the dart (m).
k = 220 N/m
m = 0.069 kg
Step 2: Use the equation for angular frequency (ω) in a spring-mass system.
ω = √(k/m)
Step 3: Plug the values of k and m into the equation and solve for ω.
ω = √(220 N/m / 0.069 kg)
Step 4: Calculate the angular frequency.
ω ≈ 56.47 rad/s
Learn more about frequency:
https://brainly.com/question/254161
#SPJ11
If a bar magnet is held stationary next to a solenoid ___
A current is generated in the magnet
The resistance of the solenoid changes
A current is generated in the solenoid
Nothing happens
If a bar magnet is held stationary next to a solenoid a current is generated in the magnet
What is magnet?
A magnet is a material that can produce a magnetic field and attract certain materials, such as iron, steel, nickel and cobalt. Magnets have two poles, north and south, that attract opposite poles and repel like poles. Magnets have been used for centuries for a variety of purposes, such as navigation and medicine. Magnets can be natural, such as lodestones, or manufactured, such as ceramic magnets and rare earth magnets. Magnets come in a variety of shapes and sizes, including bar magnets, horseshoe magnets, disc magnets and cylinder magnets. Permanent magnets are made of materials that retain their magnetism, while temporary magnets can only be magnetized while in an external magnetic field. Magnets can be used to store data on floppy disks, hard drives and credit cards, and to generate electricity in generators and motors.
To learn more about magnet
https://brainly.com/question/14997726
#SPJ1
5.31 Land rover ads used to claim that their vehicles could climb a slope of 45 Degrees. For this to be possible, what is the minimum coefficient of static friction between the vehicle's tires and the roads?A .5B .7C .9D 1.0
Land rover ads used to claim that their vehicles could climb a slope of 45 Degrees.
Hence, the correct option is D.
We can use the following formula to calculate the minimum coefficient of static friction required for the Land Rover to climb a slope of 45 degrees.
tan θ = coefficient of static friction
Where θ is the angle of the slope.
For a slope of 45 degrees, we have
tan 45 = coefficient of static friction
By simplifying, we get
1 = coefficient of static friction
Hence, the minimum coefficient of static friction required for the Land Rover to climb a slope of 45 degrees is 1.0.
Hence, the correct option is D.
To know more about slope here
https://brainly.com/question/4286669
#SPJ4
an apple hanging from a limb has potential energy because of its height. if the apple falls, what becomes of this energy just before the apple hits the ground? when it hits the ground?
When the apple falls from the limb, its potential energy is converted into kinetic energy as it gains speed while falling towards the ground. Just before the apple hits the ground, its kinetic energy is at its maximum, while its potential energy is at its minimum.
The potential energy of an apple hanging from a limb is converted into other forms of energy as it falls and eventually hits the ground.
Just before the apple hits the ground, its potential energy has been converted mainly into kinetic energy due to its motion. This happens because as the apple falls, it gains speed, and the potential energy is gradually transformed into kinetic energy.
When the apple hits the ground, the kinetic energy is then transferred into other forms of energy, such as sound energy, heat energy, and deformation (or internal) energy within the apple as it impacts the ground and becomes slightly compressed or damaged.
To know more about Potential energy and Kinetic energy:
https://brainly.com/question/9349250
#SPJ11
Microwaves have speeds
Entry field with correct answer
greater than visible light.
less than visible light.
equal to visible light.
55 miles per hour; it's still the law.
Microwaves have speeds equal to visible light. Hence option C is correct.
Visible light spectrum is nothing but the range of wavelength of radiation from 4000 angstrom to 7000 angstrom(Violet to Red). light is a energy packet. Every Photon having different wavelength travels with same velocity c (velocity of light). When we focus numbers of colors from visible spectrum to a point, that point appears as a white light. hence white light is composed of numbers of Colors in it.
Microwave is a electromagnetic wave and visible is also a electromagnetic wave hence both travels with speed of light.
Hence option C is correct.
To know more about Microwaves :
https://brainly.com/question/15708046
#SPJ4.
A stationary observer sees a clock on a train that is traveling at nearly the speed of light. Describe how the passage of time on this clock compares with the passage of time on an identical clock that the observer is holding. Write 2 – 3 sentences explaining your reasoning.
Question 3-2: How is the distance between nodes related to the wavelength?
The distance between two consecutive nodes in a wave is half the wavelength.
The distance between nodes is related to the wavelength in the following way:
The distance between two consecutive nodes in a wave is half the wavelength. This is because a node is a point where the wave has zero amplitude, and consecutive nodes are separated by one complete cycle of the wave, which is equal to half of the wavelength.
1. Identify the nodes in a wave, which are the points of zero amplitude.
2. Measure the distance between two consecutive nodes.
3. Multiply that distance by 2 to find the wavelength of the wave.
In summary, the distance between nodes is half the wavelength of the wave.
Learn more about "distance": https://brainly.com/question/26550516
#SPJ11
what happens when a color is absorbed in the visible region?
When a color is absorbed in the visible region, it means that an object absorbs certain wavelengths of light within the visible spectrum (approximately 380 nm to 750 nm) and reflects or transmits the remaining wavelengths.
The color we perceive is the combination of the wavelengths that are not absorbed by the object. For example, if an object absorbs all wavelengths except for green, it will appear green to our eyes. This phenomenon occurs due to the interaction between light and the object's atoms or molecules, which can either absorb or reflect specific wavelengths depending on their electronic structure.
More on visible region: https://brainly.com/question/9356499
#SPJ11
How will bits of paper act near a charged rod even when they are uncharged?
When a charged rod is brought near bits of uncharged paper, the paper will become polarized. This means that the positive charges in the paper will be attracted to the negatively charged rod, and the negative charges in the paper will be repelled by the rod.
This will cause the bits of paper to move towards the rod and potentially stick to it, even though they are themselves uncharged. This is because the polarized charges in the paper are attracted to the opposite charges on the rod.
TO KNOW MORW ABOUT CHARGED ROD click this link -
brainly.com/question/28899014
#SPJ11
Stars that are visible in the local sky on any clear night of the year, at any time of the night, are called _________.
-circumpolar
-celestial
-seasonal
-bright
Stars that are visible in the local sky on any clear night of the year, at any time of the night, are called circumpolar.
As one moves farther north or south from the equator, the position of the celestial equator in the sky shifts, and the angle between the celestial equator and the horizon changes. This means that some stars that are located near the celestial poles can remain above the horizon at all times, even as the Earth rotates.
For an observer located at a latitude of 90 degrees (the North or South Pole), all stars are circumpolar, and none of them will set below the horizon. For an observer located at a latitude of 30 degrees north, the stars that are within 30 degrees of the north celestial pole are circumpolar, while those within 30 degrees of the south celestial pole will never be visible from that location.
In the Northern Hemisphere, some well-known circumpolar stars include Polaris (also known as the North Star), which is located very close to the north celestial pole, and the stars of the Big Dipper, which circle around Polaris in a counterclockwise direction.
To learn more about stars, refer below:
https://brainly.com/question/31258649
#SPJ11
STT 13.5 An ice cube is floating in a glass of water that is filled entirely to the brim. When the ice cube melts, the water level will A fallB stay the sameC rise, causing the water to spill
When an ice cube floats in water, it displaces an amount of water equal to its own weight. Therefore, the correct answer is B.
As the ice cube melts, it transforms into liquid water, which occupies a smaller volume than the solid ice. This means that the melted water will take up less space than the ice cube did, resulting in a decrease in the overall volume of the system. As a result, the melted water will displace the same volume of water as the original ice cube, causing the water level to remain the same. The water level will stay the same. Therefore, the correct answer is B.
To know more about water level, here
https://brainly.com/question/17750427
#SPJ4
Why is a sawtooth wave used in subtractive synthesis as the source for a bowed string instrument?
A sawtooth wave is commonly used in subtractive synthesis as the source for a bowed string instrument because it closely resembles the harmonic content of a bowed string.
The sawtooth wave contains a rich set of overtones that are well-suited for creating the complex, expressive tones of a bowed string instrument. Additionally, the sawtooth wave's sharp rise and fall mimics the attack and decay of a bowed string, allowing for more realistic sound synthesis.
Finally, by applying a low-pass filter to the sawtooth wave, the higher harmonics can be gradually removed, creating the characteristic "mellow" sound of a bowed string instrument.
Learn more about sawtooth wave:
https://brainly.com/question/31131234
#SPJ11
as you are moving very quickly toward a speaker emitting a pure tone, which characteristics of the sound get larger? (there may be more than one correct choice.)
As you move quickly towards a speaker emitting a pure tone, the frequency of the sound you hear will appear to increase.
What is Doppler effect?As you move quickly towards a speaker emitting a pure tone, the frequency of the sound you hear will appear to increase. This is known as the Doppler effect. The faster you move towards the source of the sound, the greater the increase in frequency. This effect is noticeable with any type of wave, including sound waves and light waves.
The other characteristics of the sound, such as its amplitude or intensity, will not change significantly as you move towards the speaker. However, as you get closer to the speaker, the sound may appear to be louder due to the decrease in distance between you and the source of the sound.
To know more about Doppler effect, refer
https://brainly.com/question/28106478
#SPJ1
prediction: as the mass oscillate up and down, how will the kinetic energy change? How will the elastic potential energy change? How will the mechanical energy change?
As the mass oscillates up and down,
1. Kinetic energy (KE) will change periodically. It will be at its maximum when the mass is at the midpoint of its oscillation, and at its minimum (zero) when the mass reaches the highest and lowest points in its oscillation.
2. Elastic potential energy (EPE) will also change periodically. It will be at its maximum when the mass is at the highest and lowest points in its oscillation (where the spring is most compressed or stretched), and at its minimum (zero) when the mass is at the midpoint of its oscillation.
3. Mechanical energy (ME), which is the sum of kinetic energy and elastic potential energy, will remain constant throughout the oscillation, as long as there are no external forces (e.g., friction) causing energy loss. This is because, as the mass oscillates, the energy is transferred between kinetic energy and elastic potential energy, but the total energy remains the same.
As the mass oscillates up and down, the kinetic energy will continuously alternate between maximum and zero values. At the highest points of the oscillation, the kinetic energy will be zero as the mass momentarily stops moving. At the lowest points of the oscillation, the kinetic energy will be at its maximum as the mass is moving at its highest speed.
The elastic potential energy will also change in a similar fashion, oscillating between maximum and zero values. At the highest points of the oscillation, the elastic potential energy will be at its maximum as the spring is stretched to its greatest extent. At the lowest points of the oscillation, the elastic potential energy will be at its minimum as the spring is relaxed.
The mechanical energy, which is the sum of the kinetic and potential energies, will remain constant as the mass oscillates. This is because energy is conserved in an elastic system, meaning that the total mechanical energy will remain constant even as the kinetic and potential energies alternate.
Learn more about kinetic energy here:
https://brainly.com/question/8101588
#SPJ11
A current of 0. 8 A passes through a lamp with a resistance of 5 Ohms. What is the power supplied to the lamp in Watts? ____ Round your answer to 2 decimal places. Question 32 of 33 A hair dryer uses 578 W of power. If the hair dryer is using 7 A of current, what is the voltage (in Volts) that produces this current _____ ? Round your answer to 1 decimal place. Question 33 of 33 3. 0 Points A 2. 1 V battery supplies energy to a simple circuit at the rate of 59 W. What is the resistance of the circuit in Ohms? _____ Round your answer to 1 decimal place
Power supplied to the lamp in Watts = 3.2 W,
The voltage that produces this current = 578 V,
The resistance of the circuit in Ohms: = 0.074 Ω
For question 31:
Using the formula P = I^2 * R, we can find the power supplied to the lamp:
[tex]P = (0.8 A)^2 * 5 \Omega = 3.2 W[/tex]
For question 32:
Using Ohm's Law, we can find the voltage:
V = I * R,
[tex]V = 7 A * (578 W / 7 A) = 578 V[/tex]
For question 33:
Using the formula P = V^2 / R, we can find the resistance of the circuit:
R = V^2 / P, where R is resistance in ohms, V is voltage in volts, and P is power in watts.
[tex]R = (2.1 V)^2 / 59 W = 0.074 \Omega[/tex]
To know more about Ohm's Law, here
brainly.com/question/1247379
#SPJ4
The velocity of electron of H-atom in its ground state is 2.2×10 −6
m/s. The de-Broglie wavelength of this electron would be:
The de Broglie wavelength of the electron in the ground state of hydrogen is approximately 3.31 × 10^-10 m.
We can use the de Broglie wavelength equation which relates the momentum of a particle to its wavelength:
λ = h/p
where λ is the de Broglie wavelength, h is Planck's constant, and p is the momentum of the particle.
The momentum of the electron can be found using the classical formula:
p = mv
where m is the mass of the electron and v is its velocity.
We have:
m = mass of electron = 9.1094 × 10^-31 kg
v = 2.2 × 10^-6 m/s
Using p = mv, we get:
p = (9.1094 × 10^-31 kg)(2.2 × 10^-6 m/s) = 2.00468 × 10^-36 kg m/s
Now, we can use the de Broglie wavelength equation to find λ:
λ = h/p = (6.626 × 10^-34 J s)/(2.00468 × 10^-36 kg m/s) ≈ 3.31 × 10^-10 m
Therefore, the de Broglie wavelength of the electron in the ground state of hydrogen is approximately 3.31 × 10^-10 m.
To learn more about de Broglie wavelength visit: https://brainly.com/question/17295250
#SPJ11
A 120-g block of copper is taken from a kiln and quickly placed into a beaker of negligible heat capacity containing 300 g of water. The water temperature rises from 15°C to 35°C.Given cCu = 0.10 cal/g⋅°C, and cwater = 1.00 cal/g⋅°C, what was the temperature of the kiln?
a. 500°C
b. 360°C
c. 720°C
d. 535°C
To determine the temperature of the kiln, we can use the concept of heat transfer, where the heat gained by water equals the heat lost by the copper block.
First, we find the heat gained by water:
Q = mcΔT
where Q is the heat transfer, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.
Q_water = m_water * c_water * ΔT_water
Where:
m_water = 300 g
c_water = 1.00 cal/g·°C
ΔT_water = (35°C - 15°C) = 20°C
Q_water = 300 g * 1.00 cal/g·°C * 20°C = 6000 cal
Now, we find the heat lost by the copper block:
Q_copper = m_copper * c_copper * ΔT_copper
Where:
m_copper = 120 g
c_copper = 0.10 cal/g·°C
ΔT_copper = (T_kiln - T_final_copper)
Since heat gained by water equals heat lost by copper:
Q_water = Q_copper
6000 cal = 120 g * 0.10 cal/g·°C * (T_kiln - 35°C)
6000 cal = 12 cal/°C * (T_kiln - 35°C)
Now, solve for T_kiln:
500 = T_kiln - 35°C
T_kiln = 535°C
The temperature of the kiln was 535°C (option d).
Learn more about heat transfer here:
https://brainly.com/question/13433948
#SPJ11
9 bales of cotton, each weighing 492 lb, were held for conditioning in a humid warehouse kept at a relative humidity of 95%. calculate the total mass of water, in lb, held within these bales at the end of the conditioning period.
The amount of water held within the bales of cotton can be calculated using the concept of moisture content.
Moisture content is defined as the ratio of the mass of water to the mass of dry solids in a material. In this case, the dry solids refer to the cotton fibers.
The moisture content of the cotton can be determined using the following equation:
Moisture content = (Mass of water / Mass of dry solids) x 100%
At the end of the conditioning period, the cotton bales will have reached an equilibrium moisture content with the surrounding air in the warehouse, which has a relative humidity of 95%.
The equilibrium moisture content can be found using moisture equilibrium charts for cotton.
According to a moisture equilibrium chart for cotton at 95% relative humidity and 80°F, the equilibrium moisture content is approximately 8.5%.
Therefore, the moisture content of the cotton can be calculated as follows:
Moisture content = (8.5 / 100) = 0.085
The mass of dry solids in the 9 bales of cotton is given by:
Mass of dry solids = Number of bales x Weight of each bale
Mass of dry solids = 9 x 492 = 4,428 lb
To find the mass of water held within the cotton, we can rearrange the moisture content equation as follows:
Mass of water = Moisture content x Mass of dry solids
Mass of water = 0.085 x 4,428 = 376.38 lb
Therefore, the total mass of water held within the 9 bales of cotton at the end of the conditioning period is approximately 376.38 lb.
To know more about moisture content :
https://brainly.com/question/13768807
#SPJ11
Why is ultraviolet light often used in microscopes?
It has a longer wavelength than visible light, which decreases the diffraction.
It has a shorter wavelength than visible light, which increases the diffraction.
It has a longer wavelength than visible light, which increases the diffraction.
It has a shorter wavelength than visible light, which decreases the diffraction.
Ultraviolet light is often used in microscopes because it has a shorter wavelength than visible light, which decreases the diffraction.
The short wavelength of UV light helps to improve the image resolution beyond the diffraction limit of optical microscopes using normal white light. The response of the sample to UV light is greater than that achieved by use of white light, in respect to the surroundings.This allows for improved resolution and better image quality when examining small details and structures.UV microscopy include better resolution, depth of focus, and contrast for certain materials and fewer artifacts when viewing multilayered structures.
Hence, the correct answer is option 4. It has shorter wavelength than visible light,which decreases the diffraction.
To learn more about diffraction https://brainly.com/question/2881162
#SPJ11
suppose that the ball is dropped and you know its velocity at a certain time. What equation would you use to calculate the kinetic energy of the ball?
To calculate the kinetic energy of the ball we will use the equation KE = 1/2 * m * v^2.
The kinetic energy (KE) of an object is defined as the energy that it possesses due to its motion. It is given by the formula:
KE = 1/2 * m * v^2
where:
m is the mass of the object
v is the velocity of the object
To calculate the kinetic energy of a ball that is dropped and whose velocity is known at a certain time, we would use this formula by plugging in the values of the mass and velocity. For example, suppose that the mass of the ball is 0.2 kg and its velocity is 5 m/s at a certain time. Then the kinetic energy of the ball at that time would be:
KE = 1/2 * m * v^2
= 1/2 * (0.2 kg) * (5 m/s)^2
= 2.5 J
So, the kinetic energy of the ball at that time would be 2.5 joules.
Note that the kinetic energy of an object increases with its mass and the square of its velocity. This means that an object with a larger mass or a higher velocity will have greater kinetic energy than an object with a smaller mass or a lower velocity. Additionally, the kinetic energy of an object can be converted into other forms of energy, such as potential energy or heat, when it interacts with other objects or systems.
Therefore, the " KE = 1/2 * m * v^2 " this equation is used for calculating kinetic energy.
To learn more about kinetic energy click:
https://brainly.com/question/26472013
#SPJ4
How much air must be pushed downward at 40.0 m/s to keep 800-kg helicopter aloft?
a. 98.0 kg/s
b. 196 kg/s
c. 294 kg/s
d. 392 kg/s
To calculate the amount of air that must be pushed downward to keep the helicopter aloft, we need to use the principle of conservation of momentum. The force exerted by the air on the helicopter (thrust) must be equal and opposite to the force exerted by the helicopter on the air (drag).
We can use the equation F = ma, where F is the force, m is the mass, and a is the acceleration. In this case, the force is the thrust, the mass is the mass of the air being pushed downward, and the acceleration is the velocity of the air being pushed downward.
Thrust = Drag = Weight of helicopter
Thrust = mass of air being pushed downward x acceleration of air being pushed downward
Weight of helicopter = mass of helicopter x gravitational acceleration
So, we can rearrange these equations to solve for the mass of air being pushed downward:
mass of air being pushed downward = Weight of helicopter / acceleration of air being pushed downward
mass of air being pushed downward = (mass of helicopter x gravitational acceleration) / (velocity of air being pushed downward)
Plugging in the given values, we get:
mass of air being pushed downward = (800 kg x 9.81 m/s^2) / (40.0 m/s)
mass of air being pushed downward = 19680 / 40
mass of air being pushed downward = 492 kg/s
However, we need to push the air downward with a force equal to the weight of the helicopter, so we need to divide the mass of air being pushed downward by the gravitational acceleration:
force of air being pushed downward = (mass of air being pushed downward x gravitational acceleration)
force of air being pushed downward = (492 kg/s x 9.81 m/s^2)
force of air being pushed downward = 4825 N
This is the force of the air being pushed downward. To convert it to mass flow rate, we need to divide by the velocity of the air being pushed downward:
mass flow rate of air being pushed downward = force of air being pushed downward / velocity of air being pushed downward
mass flow rate of air being pushed downward = 4825 N / 12 m/s
mass flow rate of air being pushed downward = 402.1 kg/s
Therefore, the answer is d. 392 kg/s, which is the closest option to the calculated value.
To know more about principle of conservation of momentum :
https://brainly.com/question/7958679
#SPJ11
What assumption is violated when a refracted sound wave is processed ?
a. waves travel directly to and from a reflector
b. sound travels at an average speed of 1.54 mm/us
c. sound travels in a straight line
d. the acoustic imaging plane is very thin
Option C is Correct. The assumption that is violated when a refracted sound wave is processed is that sound travels in a straight line. Refraction occurs when sound waves pass through a medium with varying densities, causing the path of the wave to bend. T
Means that the assumption that sound travels in a straight line is no longer valid when dealing with refracted sound waves.
The refractive index, also called the index of refraction, is a number that is determined by comparing the speeds of light in a vacuum with a medium with a higher density. The letter n or n' is most usually used to indicate the refractive index variable in mathematical computations and descriptive language.
The index of refraction makes a sound.We calculate the index of refraction of a material for sound waves as the ratio of the speed of sound in the material to the speed of sound in the air.
The sound waves are reflected back when a bat's sound waves strike an object.
For echolocation, bats used sound reflection to detect the location of adjacent objects.
They also utilise it to gauge an object's size and shape.
Echolocation is the process by which bats utilise sound to pinpoint their location.
The bat projects the location of its targets by picking up the reflected sound.
Learn more about Refraction here
https://brainly.com/question/30891558
#SPJ11
The observation that materials expand in size with an increase in temperature can be applied to what approximate proportion of existing substances?
A. All (100 %) B. Most (90 % or more) C. Half (roughly 50 %)
D. Few (less than 50 %) E. None
B. Most (90% or more) of existing substances expand in size with an increase in temperature, based on the observation of thermal expansion.
The observation that materials expand in size with an increase in temperature can be applied to most (approximately 90% or more) of existing substances. This is because thermal expansion is a common property of materials due to the increased kinetic energy of particles as temperature rises. However, there are some exceptions where materials may contract or exhibit unique behaviors under specific conditions. The observation that materials expand in size with an increase in temperature can be applied to most (approximately 90% or more) of existing substances. The observation that materials expand in size with an increase in temperature can be applied to most (approximately 90% or more) of existing substances.
Learn more about thermal expansion:
https://brainly.com/question/30925006
#SPJ11
The breaking of chemical bonds
releases energy. Absorbs energy. Neither absorbs nor releases energy. Either absorbs or releases energy depending on the type of reaction
The breaking of chemical bonds can either absorb or release energy, depending on the type of chemical reaction. Some chemical reactions release energy when bonds are broken, while others absorb energy. So the correct answer is option: 4.
In exothermic reactions, the energy released by the breaking of chemical bonds is greater than the energy required to break the bonds. Therefore, the excess energy is released in the form of heat, light, or sound.
In endothermic reactions, the energy required to break the bonds is greater than the energy released. Therefore, energy must be absorbed from the surroundings in order to break the bonds. Correct option is 4.
To know more about chemical bonds, here
brainly.com/question/12907148
#SPJ4
--The complete Question is, The breaking of chemical bonds
1. releases energy.
2. Absorbs energy.
3. Neither absorbs nor releases energy.
4. Either absorbs or releases energy depending on the type of reaction --
Given the equation describing the motion of an object undergoing simple harmonic motion, Find the angular period.
[tex]\frac{d^2x}{dt^2} +\frac{k}{m} x=0[/tex] this equation describing the motion of an object undergoing simple harmonic motion, where angular period is T = 2π√(m/k).
Simple harmonic motion is a specific kind of periodic motion of a body that arises from a dynamic equilibrium between an inertial force that is proportional to the body's acceleration away from the static equilibrium position and a restoring force on the moving object that is directly proportional to the magnitude of the object's displacement and acts towards the object's equilibrium position. If friction or any other energy dissipation is not present, it leads to an oscillation that is represented by a sinusoid and that lasts indefinitely.
[tex]\frac{d^2x}{dt^2} +\frac{k}{m} x=0[/tex] this is differential equation for SHM.
where angular velocity ω = √(k/m)
∵ ω = 2π/T where T is period of SHM
2π/T = √(k/m)
T = 2π√(m/k)
To know more about SHM :
https://brainly.com/question/30404816
#SPJ4.
What are the three cardinal wave rules?
The three cardinal wave rules are:
Superposition
Reflection
Refraction
1. Superposition Principle: When two or more waves meet at a point, the resultant wave's displacement is the algebraic sum of the individual wave displacements at that point.
2. Reflection: When a wave encounters a boundary or obstacle, it bounces back, changing direction while maintaining its speed, wavelength, and frequency.
3. Refraction: When a wave passes from one medium to another, its speed changes, causing the wave to change direction. This bending of the wave is known as refraction, and it's governed by Snell's Law.
These rules help to describe the behavior of waves in various situations and are fundamental to understanding wave interactions and propagation.
To learn more about refraction, refer below:
https://brainly.com/question/14760207
#SPJ11
Which is better during a thunderstorm:A. being in your car B. standing under a tree on the golf course
During a thunderstorm, it is safer to be in your car than standing under a tree on a golf course.
This is because lightning can strike tall objects such as trees and golf clubs, making you more susceptible to getting struck.
Being in a car, on the other hand, provides a safe shelter as long as you avoid touching any metal parts inside the vehicle. Remember, it is always best to seek shelter indoors during a thunderstorm.
To know more about thunderstorm here
https://brainly.com/question/12712011
#SPJ11
A force in the negative direction of an x axis is applied for 23 ms to a 0.61 kg ball initially moving at 27 m/s in the positive direction of the axis. The force varies in magnitude, and the impulse has magnitude 45.9 N s. (b) What is the average magnitude of the force on the ball?
A force is applied for 23 ms to a 0.61 kg ball initially moving at 27 m/s in the positive x direction. The impulse has a magnitude of 45.9 N s, and the average magnitude of the force on the ball is approximately 2.00 kN.
We can use the impulse-momentum theorem to find the change in momentum of the ball during the time the force is applied
J = Δp = [tex]p_f[/tex] - [tex]p_i[/tex]
where J is the impulse, [tex]p_f[/tex] is the final momentum, and [tex]p_i[/tex] is the initial momentum. We know that the ball has an initial momentum of
[tex]p_i[/tex] = m*[tex]v_i[/tex] = 0.61 kg * 27 m/s = 16.47 kg m/s
We also know that the impulse has a magnitude of
J = Δp = [tex]p_f[/tex] - [tex]p_i[/tex] = 45.9 N s
Therefore, the final momentum of the ball is
[tex]p_f[/tex] = [tex]p_i[/tex] + J = 16.47 kg m/s - 45.9 N s = -29.43 kg m/s
The negative sign indicates that the ball is moving in the negative direction of the x axis after the force is applied.
We can find the average magnitude of the force by using the formula
[tex]F_{avg}[/tex] = J / Δt
where Δt is the time interval during which the impulse is applied. We know that the impulse has a magnitude of
J = 45.9 N s
And we are told that the applied force is
Δt = 23 ms = 0.023 s
Therefore, the average magnitude of the force is
[tex]F_{avg}[/tex] = J / Δt = 45.9 N s / 0.023 s ≈ 1996.96 N ≈ 2.00 kN
So the average magnitude of the force on the ball is approximately 2.00 kN.
To know more about force:
https://brainly.com/question/29181860
#SPJ4
