A go cart engine applies a force of 888N and moves the cart forward 22m.
a) How much work is done?
b) We put on a bigger engine (1111N) but the cart still moves forward 22m. How much work is done now?
c) Why would you put on a bigger engine if you are still moving 22m?

Answers

Answer 1

Answer:

Explanation:

a) work=Force times distance. given force is 888N and distance travelled is 22M

work= 888 x 22 = 19536J or 1.954x10^5J

b) work = 1111 x 22= 24442J or 2.444x10^5J

c) putting on a larger engine means that there are gonna be more force applied to the go cart. therefore the cart will travel the same distance faster

Answer 2

a. The amount of work done by the go cart engine is 19,536 Nm.

b. The amount of work done when a bigger engine is used is 24,442 Nm.

c. The reason why a bigger engine is used is, so that the engine can easily do more work in the same amount of distance.

Given the following data:

Force A = 888 NewtonDistance = 22 meterForce B = 1111 Newton

a. To determine the amount of work done by the go cart engine:

Mathematically, the work done by an object is given by the formula;

[tex]Work\;done = Force \times distance[/tex]

Substituting the given parameters into the formula, we have;

[tex]Work\;done = 888 \times 22[/tex]

Work done = 19,536 Nm.

b. To determine the amount of work done when a bigger engine is used:

[tex]Work\;done = Force \times distance[/tex]

[tex]Work\;done = 1111 \times 22[/tex]

Work done = 24,442 Nm.

c. The reason why a bigger engine is used is, so that the engine can easily do more work in the same amount of distance.

Read more: https://brainly.com/question/22599382


Related Questions

10. How do you use a triple-beam balance? Fill in the blanks.

1st – Place the film canister on the ________________.

2nd – Slide the large ________________ to the right until the arm drops below the line and then move it back one notch.

3rd – Repeat this process with the _________ weight. When the arm moves below the line, back it up one groove.

4th – Slide the ______________ weight on the front beam until the _____________ match up.

5th – Add the amounts on each beam to find the total __________ to the nearest tenth of a gram.

Answers

Answer:

1st – Place the film canister on the scale.

2nd – Slide the large weight to the right until the arm drops below the line and then move it back one notch.

3rd – Repeat this process with the top weight. When the arm moves below the line, back it up one groove.

4th – Slide the small weight on the front beam until the lines match up.

5th – Add the amounts on each beam to find the total mass to the nearest tenth of a gram.

Explanation:

The triple beam balance is an instrument that is used in measuring the mass of substances to a very high degree of precision. The reading error is given by ±0.05 grams. The triple beam balance as the name implies has three beams that measure substances of different mass levels.

The beams are categorized as small, medium, and large. There is a balance on which the substance to be weighed is placed directly upon. To use this measuring device, the procedures mentioned above are followed.

A vehicle with a mass of 1250 kg travels at a speed of 113 km/h. What is the vehicle’s momentum?

Answers

Answer:

50 mph

Explanation:

Given 1 inch ≡ 2.54 cm and 1 foot ≡
12 inches, how many square centimeters are
in 3.22 ft2
?

Answers

Answer:

2991.47 [cm^2]

Explanation:

To solve this problem we must perform a dimensional analysis and use the corresponding conversion values:

[tex]3.22[ft^{2}]*\frac{12^{2}in^{2} }{1^{2}ft^{2}} *\frac{2.54^{2}cm^{2} }{1^{2}in^{2} } \\2991.47[cm^{2}][/tex]

What is the biggest animal on land?

Answers

Answer:

elephant

Explanation:

Answer:

elephant

Explanation:

how does the initial velocity affect the final velocity

Answers

Answer:

Initial velocity is independent of the slope of the graph; that is, the acceleration. An object thrown downward still accelerates after release at the same rate as an object that is dropped.

Joe went to see his Grandmother. He promised his Grandma that he would arrive at her house at 5 pm. He leaves his house at 3:00 and this will allow him 2 hours to get to her house. Joe will need to travel 70 miles to get to her house. How fast will Joe need to drive to make it to Grandma's house on time?

Answers

Answer:

35 mph

Explanation:

From the question given above, the following data were obtained:

Time (t) = 2 hours

Distance (d) = 70 miles

Speed (S) =.?

Speed is simply defined as the distance travelled per unit time. Mathematically, it is expressed as:

Speed (S) = Distance (d) / Time (t)

S = d/t

With the above formula, we can calculate how fast (i.e the speed) Joe will need to drive to make it to his Grandma's house on time. This can be obtained as follow:

Time (t) = 2 hours

Distance (d) = 70 miles

Speed (S) =.?

S = d/t

S = 70/2

S = 35 mph

Therefore, Joe will drive at 35 mph in order to get to his Grandma's house on time.

Which option is an example of a surface wave?
A. A light wave
B. A wave on top of water
C. A sound wave
D. A wave carried through a rope

Answers

The answer is B hope it helps

Surface waves are winds blowing through the  surface of ocean water. Therefore, option B is correct. All other options are just examples of waves and not wind.

What are surface waves ?

Ocean water flows in currents, much like air does in the atmosphere. A current is an oceanic current, or stream, of flowing water. The primary cause of surface currents is wind, although not daily winds.

The main wind belts are what produce surface currents. These winds always blow in the same direction. so that they can maintain the direction of the water's flow.

Three factors influence surface currents: global wind patterns, Earth's rotation, and the configuration of ocean basins. Because they disperse heat over the earth, surface currents are crucial. Global climate is significantly influenced by surface currents as well.

Find more on surface waves:

https://brainly.com/question/13779567

#SPJ5

Complete the statement below with all that apply.
Acceleration is
A. the slope of a velocity vs. time graph
Pector
B. a Vector
C. measured in m/s
D. the change in displacement divided by the change in time

Answers

Answer:

Acceleration is a vector, is measured in m/s, and A.

Explanation: SO BASICALLY, the answer to this question is A, B, and C. The last one would not fit the description of acceleration because it is describing Velocity.

Calculate the momentum of the skater with a mass of 45kg and a velocity of 3 m/s.

Answers

Answer:

90 kgm/s

Explanation:

a student pushes a book with a force of 5 N to the east.which statement
describes the reaction force?

Answers

Answer:

5N westward, acting on the student

Explanation:

Answer: 5N westward, acting on the student

Explanation:

What is the oldest animal on earth?

Answers

Answer:

well on earth living are turtuls but just longest ied say dinos

Explanation:

A rescue pilot wishes to drop a package of emergency supplies so that it lands as close as possible to a target. If the plane travels with a velocity of 18 m/s and is flying 225 m above the target, how far away (horizontally) from the target must the rescue pilot drop the package?

Answers

Answer:

x = 121.86 m

Explanation:

It is given that,

The vertical velocity of a plane, [tex]v_x=18\ m/s[/tex]

It is flying above the target, h = 225 m

First we will find the time taken by the plane to reach the ground. It can be calculated using the second equation of motion as follow :

[tex]h=ut+\dfrac{1}{2}at^2[/tex]

Here, u = 0 and a = g

[tex]h=\dfrac{1}{2}gt^2\\\\t=\sqrt{\dfrac{2h}{g}} \\\\t=\sqrt{\dfrac{2\times 225}{9.81}} \\\\t=6.77\ s[/tex]

Let x is the horizontal distance from the target. It can be calculated as follows :

[tex]x=v_xt\\\\x=18\times 6.77\\\\x=121.86\ m[/tex]

So, the rescue pilot drop the package at a distance of 121.86 m from the target.

dimensional formula of energy​

Answers

Answer:

[M L2 T-2]

Explanation:

hope this is what you're looking for.

[M L2 T2] SI Symbol: J

A football player sprints down the field for a touchdown traveling a total of
40 meters in 5 seconds. What was the football player's speed?

Answers

Answer:

Explanation:

It's a good thing to claim this was speed and not velocity.

Givens

d = 40 meters

t = 5 seconds

V = ??

Formula

v = d/t

Solution

v = 40 m/5 sec

v = 8 m/s

If you really wanted to get picky, you should convert the distance to yards which is how distance is measured in football

1.09 yards = 1 meter

d = 40 * 1.09 = 43.74 yards.

t = 5 seconds

v = 43.74/5 = 8.749 yards / second.

A red rubber ball rolls down a hill from rest with an acceleration of 7.8 m/s 2 . How fast is it moving after it has traveled 5 m?

Answers

Answer:

8.83m

Explanation:

Given parameters:

  Acceleration  = 7.8m/s²

   Initial velocity = 0m/s

  distance covered  = 5m

Unknown:

Final velocity  = ?

Solution:

The equation to solve this problem with is given as;

    V² = U² + 2aS

V is the final velocity

U is the initial velocity

a is the acceleration

S is the distance

 Input the parameters and solve;

    V² = 0² + 2 x 7.8 x 5 = 78

    V = √78 = 8.83m

what is the definition of physics?

A.the study of living organisms, divided into many specialized fields that cover their morphology, physiology, anatomy, behavior, origin, and distribution

B.the branch of science that deals with the identification of the substance of which matter is composed

C.the branch of science concerned with the nature and properties of matter and energy

D.the branch that deals with the relations of organisms to one another and to their physical surroundings

Answers

Answer:

your answer should be c

Answer:

D.the branch that deals with the relations of organisms to one another and to their physical surroundings

A golfer imparts a speed of 29.0 m/s to a ball, and it travels the maximum possible distance before landing on the green. the tee and the green are at the same elevation. (a) how much time does the ball spend in the air? (b) what is the longest hole in one that the golfer can make, if the ball does not roll when it hits the green?

Answers

Explanation:

It is given that,

Initial speed of a golfer, u = 29 m/s

If it travels the maximum possible distance before landing. It means that it is projected at an angle of 45 degrees.

(a) We need to find the time spent by the ball in the air. It can be calculated by using second equation of motion.

[tex]s=ut+\dfrac{1}{2}at^2[/tex]

Here,

a = -g

s = 0 (it is displacement and it is equal to 0 as the ball lands on the green).

So,

[tex]0=29\sin(45)t-\dfrac{1}{2}\times 9.8t^2\ (\text{Initial vertical component of velocity is taken})\\\\-4.9t^2+29\times \dfrac{1}{\sqrt2}t=0\\\\-4.9t^2+20.5t=0\\\\t=0,4.184\ s[/tex]

So, it will take 4.184 seconds in the air.

(b) let x is the longest hole in one that the golfer can make if the ball does not roll when it hits the green. It can be given by :

[tex]x=vt\cos\theta\\\\x=29\times 4.184\times \cos(45)\\\\x=85.79\ m[/tex]

Hence, this is the required solution.

At a objects highest point is the acceleration zero too?

Answers

Answer:

Acceleration from gravity is always constant and downward, but the direction and magnitude of velocity change. At the highest point in its trajectory, the ball has zero velocity, and the magnitude of velocity increases again as the ball falls back toward the earth

Explanation:

Answer:

No

Explanation:

becuse it's not even outer space there's acceleration there's no such thing as Zero acceleration speed except if you're not in motion.

PLEASEEE HELPPPPPPP:
A current of 15 Amps flows through a circuit with a resistance of 0.10 Ohms. What is the voltage?

Answers

V(voltage) = I(current)R(resistance)
substitute in the values

V = 15 * 0.10
V = 1.5 volts

A current of 15 amperes is flowing with a resistance of 0.10 ohms, then the voltage will be equal to 1.5 volts.

What is Electrical energy?

When put in an electromagnetic field, charged matter experiences a force due to the fundamental property of electric charge. Positive or negative electrical ions are possible.

When two charges are in opposition to one another, they repel one another. The term "neutral" refers to an object that has no net charge. The early understanding of the way charged particles interact is now referred to as classical electrodynamics, and it is still true for issues that do not demand taking into account quant phenomena.

Electrical charge is a preserved attribute, meaning that the net charge of an isolated system—that is, the sum of the positive and negative charges—cannot change. Particles at the subatomic level carry an electric charge.

As per the data given in the question,

Current, I = 15 A

Resistance, R = 0.10 ohms

Then, the voltage (V) will be,

V = RI

V = 15 × 0.10

V = 1.5 volts.

To know more about Electrical energy:

https://brainly.com/question/16182853

#SPJ2

Kinetic and potential energy are forms of what kind of energy?

gravitational

chemical

electrical

mechanical

Answers

Answer:

mechanical energy

Explanation:

The key difference that exists between kinetic energy and potential energy lies in the fact that, potential energy is that form of mechanical energy which is stored within an object, ready to be released as and when needed to do some work, while, kinetic energy is that form of mechanical energy that has been released and is associated with the body in motion.

The temperature of a 5.0 kg block increases by 3 degrees C when 2,000 J of thermal energy are added to the block. What is the specific heat of the block? _____________

Answers

Answer:

133.33J/kg°C

Explanation:

Given parameters:

    Mass = 5kg

    Temperature change  = 3°C

    Thermal energy  = 2000J

Unknown:

Specific heat of the block = ?

Solution:

To find the specific heat capacity, use the formula below;

          H  = mCФ

where H is amount of heat

           m is the mass

           C is the specific heat capacity

           Ф is the temperature change

Input the parameters and solve;

    2000 = 5 x C x 3

        C  = [tex]\frac{2000}{15}[/tex]

         C = 133.33J/kg°C

A ball of mass 200 g rolls along the ground at a speed of 5.2 m/s. Calculate the kinetic energy of the ball.

Answers

Answer:

We have a mass of 200g (0.2kg) moving at 20m/s

Kinetic Energy KE = ½ mv^2 where m is mass and v is velocity

Actually, v is a vector quantity, so KE = ½ mv•v

The dot product of 2 vectors a and b is abCosθ where θ is the angle between the vectors.

Obviously v•v = v^2 Cos0 = v^2

In this case, we have KE = ½ (0.2)(20^2) = 40kg-m^2/s^2 = 40J

So we have kinetic energy in the amount of 40 Joules.

Explanation:

The right answer is "2.7 J"

Answer explanation:

Remember to convert grams to kilograms first by dividing by 1000.

Kinetic energy

= 1/2 × mass × speed2

= 1/2 × 0.2 kg × (5.2 m/s)^2

= 2.7 J (to 2 sig. fig.)

Hope it helps ✨✨

Which mathematical statement shows the relationship between gravity and mass?

Answers

Answer

F (force of gravity) = M (mass of an object) × G (acceleration due to gravity)

Step-by-step explanation:

Force of gravity (F) = Mass (M) × Gravitational acceleration (G)

The weight of an abject is equal to its gravitational force!

Explanation:

Answer:

[tex]F_{g} = \frac{m}{d^{2} }[/tex] shows the relationship between gravity and mass.

Explanation:

According to the Newton's law of gravitation, the gravitational force between two bodies is,

       [tex]F_{g} = G.\frac{m_{1}.m_{2} }{d^{2} }[/tex]

here [tex]m_{1} and m_{2}[/tex] are masses, d is distance between them.

What is Newton's law of Gravitation ?

It states that gravitational force acting two bodies is directly proportional to the product of masses and inversely proportional to the square of the distance between them.

In above formula ,

If [tex]m_{1} = 1 and[/tex]  [tex]m_{2} = m[/tex]

so [tex]F_{g} = G \frac{m}{d^{2} }[/tex]

Since G is constant ,

    [tex]F_{g}[/tex] ∝[tex]\frac{m}{d^{2} }[/tex]

Hence second option is correctly showing relationship between gravity and mass.

https://brainly.com/question/22522227

#SPJ2

Lincoln can run at a speed of 3 m/s. How long would it take him to run 200 meters?

Answers

Answer:Answer is 66.66666666666667

Explanation:all you have to do is divide 200/3

Answer:

66 seconds

Explanation:

time=distance/speed

200/3=66.6

what is the first step to CPR

Answers

Answer:

call for help and check if the person has not passed out (check their pulse.)

Explanation:

Please help me with this psychics problem, forever thankful!

Place the following in order of increasing frequency (low to high).
Radio Waves

X-Rays, (1018 Hz to 1022 Hz), (1 nm to 10-3 nm)
:
Ultraviolet, (7 x 1014 Hz to 1018 Hz), (103 nm to 1 nm)

Visible Light, (4 x 1014 Hz to 7 x 1014 Hz) (700 nm to 380 nm)

Infrared, (1010 Hz to 4 x 1014 Hz), (106 nm to 103 nm)

Microwaves, (106 Hz to 1010 Hz), (1 m to 106 nm)
Gamma Rays

Answers

Answer:

I don't know how it works, but I found this on the internet. image does not belong to me.

hope it helps!

Answer:

X-RAY

Explanation:

I took the test on study island

PLZ HELP DUE IN 5MINUTES

Answers

I think nitrogen as it is the major component

Answer:

Nitrogen is de solvent while others are the solute

A 15kg block of frozen water is being acted upon
by two forces as shown. Which of the following
diagrams will have the smallest net acceleration?
A)
F2=10N
F =28N
B)
F=100N
Fi=90N
0)
Fi=4N
F2=12N
D)
Fi=150N
F2=140N​

Answers

Answer:

C

Explanation:

I'm not 200% sure whether net acceleration would be F1 - F2 or F1 + F2, but C works in both scenarios. Either the net acceleration is 18 N, which is the lowest, or it is 8 N, which is also the lowest.

Do all the molecules of a liquid take part in evaporation? If not , explain.​

Answers

Answer:

no

Explanation:

only the ones near the surface have enough kinetic energy

Answer:

no

Explanation:No, all the molecules of the liquid do not take part in evaporation only those molecules near the surface of liquid which acquire sufficient Kinetic energy (Thresold velocity) escape as they  attractive forces of other molecules. Then other molecules come to the surface of the liquid and acquire more K.E. and escape the surface. This continues till all the liquid evaporates.

An object that does not vibrate cannot produces what?

A.sound
B.light
C.heat
D.electricity

Answers

Answer:

An object that does not vibrate cannot produce sound

Other Questions
Ratio of Liabilities to Stockholders' Equity and Ratio of Fixed Assets to Long-Term Liabilities Recent balance sheet information for two companies in the food industry, Mondelez International, Inc. and The Hershey Company, is as follows (in thousands): Mondelez Hershey Net property, plant, and equipment $10,010,000 $1,674,071 Current liabilities 14,873,000 1,471,110 Long-term debt 15,574,000 1,530,967 Other long-term liabilities 12,816,000 716,013 Stockholders' equity 32,215,000 1,036,749 a. Determine the ratio of liabilities to stockholders' equity for both companies. Round to one decimal place. 6. The ink pen was dropped by her parent. Change this sentence to active voice. * if a number contains decimal places then it is an irrational number Samantha has 4 1/2 gallons of lemonade for her daughters birthday party. Each gallon of lemonade contains 1.5 grams of fat. How many grams of fat are contained in all the lemonade Samantha has for the party? Barbara bought items for $7.50, $8.25, and $6.15. She gave the clerk $30.00. How much was her change?O A. $8.10 the simple interest on $15000 for three months at 10% per annum is what are commands that are signed by the president and have the power of law Which two descriptions fit a major character in a story?a character who serves only to help develop other charactersa character with a complex and realistic personalitya character with a very simple or two-dimensional personalitya character whose actions advance the plota character who doesnt change during the story I have a question?? If you draw good like very good can you draw me a feather in flames like the one in the picture please if you want you can color it of leave like that? Is the side length 23+3 rational or irrational? Explain your reasoning.100 points but If you answer something random I will report. Find the solutions for F(x)=2x + 4x + 2Xf(x)-3-2-101234 Which of these are reliable Internet sources for conducting research? Check all that apply.sites van by universitiessites that anyone can editUS government sitesonline newspaper sitesanonymously authored sites One or more hyphens are used correctly in all of these sentences except which one? In general, % of the values in a data set lie at or below the 16th percentile. % of the values in a data set lie at or above the 24th percentile.. If a sample consists of 800 test scores, of them would be at or below the 86th percentile. If a sample consists of 800 test scores, of them would be at or above the 14th percentile. ILL MARK BRAINLEST! :) how to do this question plz The nucleotide sequence encoded in a gene defines thethat make up proteins. When the speed of the bottle is 2 m/s, the KE isV 0.5 kg m/s2When the speed of the bottle is 3 m/s, the KE isV1kg m/s2When the speed of the bottle is 4 m/s, the KE isV 24 kg . m/s2When the speed of the bottle is 5 m/s, the KE isV 3 kg . m/s2When the speed of the bottle is 6 m/s, the KE isV 5 kg. m/s2 BRAINLIEST FOR CORRECT ANSWER!!!!!!(TRUE OR FALSE?)Imagine that you are researching the topic of police shootings in order to eventually pose and investigate a question. When researching, you should only search for sources that reinforce your own opinion on the subject. What two responses were immediately debated?naval quarantine, diplomacyo invasion, naval quarantineo invasion, nuclear strikeDONE