A gas in a closed container is heated with 12J of energy, causing the lid of the container to rise 3m with 5N of force. What is the total change in energy?

Answers

Answer 1

Answer:

27J

Explanation:

From conservation of Thermal energy, the total internal energy is the total sum of energy supplied or taken from the system plus work done for or on the system.

Now the change in internal energy would be the sum of the received energy substended in the gas plus the work done by the system which is workdone that it will sustend in pushing the lid. This is expressed mathematically as;

U = Q + (F×d);

U- change in internal energy

Q is the energy received by the system and is positive when energy is received by the system.

Fxd is the workdone and is positive since the gas pushes up the lid- the system does work.

U=12+(3×5)= 27J


Related Questions

A uniform ladder stands on a rough floor and rests against a frictionless wall. Since the floor is rough, it exerts both a normal force N1 and a frictional force f1 on the ladder. However, since the wall is frictionless, it exerts only a normal force N2 on the ladder. The ladder has a length of L = 4.6m, a weight of WL= 69.0N , and rests against the wall a distance d = 3.75 m above the floor. If a person with a mass of m = 90 kg is standing on the ladder, determine the forces exerted on the ladder when the person is halfway up the ladder.

Required:
Solve of N1, N2 and f1

Answers

Answer:

The  normal force N1 exerted by the floor is  [tex]N_1 = 951 \ N[/tex]

The  normal force N2 exerted by the wall is  [tex]N_2= 616.43 \ N[/tex]

The frictional force exerted by the wall is  [tex]f = N_2 = 616.43 \ N[/tex]  

Explanation:

From the question we are told that

    The length of the ladder is  [tex]L = 4.6 \ m[/tex]

    The weight of the ladder  is

    The distance of the ladder position on the wall from the floor is  [tex]D = 3.75 \ m[/tex]

     The mass of the person is  [tex]m = 90 kg[/tex]

Applying Pythagoras theorem

The length of the position the ladder on the ground from the base of the wall is

    [tex]A = \sqrt{L^ 2 - D^2}[/tex]

substituting values

    [tex]A = \sqrt{(4.6^2)-(3.75^2)}[/tex]

    [tex]A = 2.66 \ m[/tex]

  In order the for the ladder not to shift from the ground the sum of the moment about the position of the ladder on the ground must be equal to zero this is mathematically represented as

        [tex]\sum M = 0 = N_2 * D - [\frac{1}{2} * W_L ] * [(mg) *A ][/tex]

         [tex]\sum M = 0 = N_2 * 3.75 - [\frac{1}{2} * 69.0 ] * [(90*9.8) * \frac{4.6}{2.66} ][/tex]

        [tex]N_2 * 3.75 =2311.62[/tex]

        [tex]N_2 * 3.75 =2311.62[/tex]

        [tex]N_2= 616.43 \ N[/tex]

Now the force exerted by the floor on the ladder is mathematically represented as

           [tex]N_1 = W_L + (m * g )[/tex]

substituting values

          [tex]N_1 = 951 \ N[/tex]

Now the horizontal forces acting on the ladder are [tex]N_2 \ and \ f[/tex] and they are in opposite direction so

     [tex]f = N_2 = 616.43 \ N[/tex]  

         

1. For each of the following scenarios, describe the force providing the centripetal force for the motion: a. a car making a turn b. a child swinging around a pole c. a person sitting on a bench facing the center of a carousel d. a rock swinging on a string e. the Earth orbiting the Sun.

Answers

Complete Question

For each of the following scenarios, describe the force providing the centripetal force for the motion:

a. a car making a turn

b. a child swinging around a pole

c. a person sitting on a bench facing the center of a carousel

d. a rock swinging on a string

e. the Earth orbiting the Sun.

Answer:

Considering a

    The force providing the centripetal force is the frictional force on the tires \

          i.e  [tex]\mu mg = \frac{mv^2}{r}[/tex]

    where [tex]\mu[/tex] is the coefficient of static friction

Considering b

   The force providing the centripetal force is the force experienced by the boys  hand on the pole

Considering c

     The force providing the centripetal force is the normal from the bench due to the boys weight

Considering d

     The force providing the centripetal force is the tension on the string

Considering e

      The force providing the centripetal force is the force of gravity between the earth and the sun

Explanation:

Someone plzzz helpppppp with this last question

Answers

Answer:

I dont know someone deleted answers. But they were wrong. INERTIA IS CORRECT I DID THIS IN MY SCHOOL

C IS CORRECT

If radio waves are used to communicate with an alien spaceship approaching Earth at 10% of the speed of light c, the aliens would receive our signals at speed of:_______.
a. 0.99c
b. 1.10c
c. 1.00c
d. 0.90c
e. 0.10c

Answers

Answer:

3×10^7 m/s or 0.10c (e)

Explanation: If the actual value of the speed of light were to be put into consideration.

Given that the speed of light is c = 3.0×10^8m/s

The alien spaceship is approaching at the rate of 10% of the speed of light.

10% of 3.0×10^8m/s

10/100 × 3.0×10^8m/s

0.1 ×3.0×10^8m/s

3×10^7 m/s. Which is the same thing as 0.1 of c = 0.1×c

Answer: 1.00c

Explanation: I got it correct on the homework

What is the speed at which a spaceship shoots up from earth ?

Answers

Answer:

Once at a steady cruising speed of about 16,150mph (26,000kph

Explanation:

Unit conversion

The choices are in units
A,GA,MA,uA,kA,mA,nA,pA. Pick one the units

Answers

Answer:

  1.234567 kA

Explanation:

The prefix k stands for kilo-, or 10³. The prefix m stands for milli-, or 10⁻³. The sum shown is ...

  1.234 kA + 0.000567 kA = 1.234567 kA

What's a line of best fit? Will give BRAINLIEST

Answers

A line of best fit expresses the relationship between the points.

Explanation:

It does not go through all the points but goes through most of them and it is like a hardrawn curve

HELPP ?Air at a temperature of 27 C and 1 atm pressure in a 4 liter cylinder of a diesel engine There. By pushing the piston, the volume of air shrinks 16 times and the pressure increases 40 times. a) How many moles of air are in the cylinder. b) What is the final temperature of the air?

Answers

Answer:

a. 0.16240664737515434 moles

b. 67.5 degrees Celcius

Explanation:

a. Use Ideal Gas Equation

PV=nRT

Where P = pressure in pascals, V=Volume in cubic meters, n=number of moles, R is a constant=8.314 J/mol.K and T is temperature in Kelvin.

27C = 273+27=300Kelvin

volume 4L = 0.004m^3

Pressure = 1atm = 101325 Pascal

PV=nRT

101325Pa*0.004m^3=n*8.314J/mol.K*300K

Solving for n from the above you get n=0.16240664737515434 moles

b.Use combined gas law equation

P1*V1/T1=P2*V2/T2

P1= 1atm

V1=4L

T1=27C

P2= 4/16 L =0.25L

P=1*40 atm = 40atm

We do not know T2

USING THE FORMULA

(1atm*4L)/27C = (40atm*0.25L)/T2

(1*4)/27=(40*0.25)/T2

IF you simplify for T2, you get 67.5

Hence final temperature = 67.5 degrees Celcius

2. If rain is falling vertically downward, and you are running for shelter, should you hold your umbrella
vertically, tilted forward, or tilted backward to keep the driest? Please explain.​

Answers

Answer:

Tilted forward to keep the driest.

Explanation:

The rain is falling vertically so there is no wind. In these circumstances the umbrella should be tilted vertically forward.

The situation is the same as if you would stand still and the rain would come under an angle from the front.

A mechanic applies a force of 60N at a distance of 80 cm from the pivot on a wheel wrench. What is the size of the moment?

Answers

Answer:

48 Nm

Explanation:

Moment, or torque, is the cross product of radius and force vectors.

τ = r × F

τ = (0.80 m) (60 N)

τ = 48 Nm

A student has derived the following nondimensionally homogeneous equation: a=x/t2-vt+F/m where v is a velocity's magnitude , a is an acceleration's magnitude, t is a time, m is a mass, F is a force's magnitude , and x is a distance (or length). Which terms are dimensionally homogeneous? .
a) x/t
b) vt
c) a
d) F/m

Answers

Answer:

Letter C) and D) is the correct answer.

Explanation:

We know that the a is an acceleration's magnitude, so the units of a are m/s².

Now, let's analyze each terms. If we want that each term will be dimensionally homogeneous, all of them must have the same units of a.

[tex][\frac{x}{t}]=[\frac{m}{s}][/tex]

[tex][vt]=[m][/tex]

[tex][\frac{F}{m}]=[\frac{N}{kg}]=[kg\frac{m}{s^{2}kg}]=[\frac{m}{s^{2}}][/tex]

Therefore, the term F/m is the correct answer.

I hope it helps you!

We can see that  a and F/M are dimensionally homogeneous.

In solving dimensions, we try to express a quantity in terms of the fundamental quantities;

MassLengthTime

For the term a, its dimension is LT^-2

For the term F/m, its dimension is LT^-2

Hence, it follows that a and F/M are dimensionally homogeneous.

Learn more about dimensions: https://brainly.com/question/944206

A certain freely falling object, released from rest, requires 1.85 s to travel the last 26.5 m before it hits the ground. (a) Find the velocity of the object when it is 26.5 m above the ground. (Indicate the direction with the sign of your answer. Let the positive direction be upward.) -2.70 Incorrect: Your answer is incorrect. Your response differs from the correct answer by more than 10%. Double check your calculations. m/s (b) Find the total distance the object travels during the fall.

Answers

Answer:

  a) -5.26 m/s

  b) 27.91 m

Explanation:

a) The acceleration due to gravity makes the velocity increase in magnitude in a linear way. The average velocity over the interval will be equal to the actual velocity halfway through the interval. The velocity at the beginning of the interval will be higher (less negative) by the amount velocity changes in the first half of the interval.

  average velocity = (0 -(26.5 m))/(1.85 s) ≈ -14.324 m/s

The change in velocity in the first half of the interval is ...

  Δv = (Δt/2)×(-9.8 m/s²) = (1.85 s)(-4.9 m/s²) = -9.065 m/s

So, the initial velocity (at the beginning of the last 1.85 s interval) is ...

  v1 = (average velocity) -Δv = (-14.324 m/s) -(-9.065 m/s)

  v1 = -5.259 m/s

__

b) The velocity when the object hits the ground is ...

  v2 = average velocity +Δv = -14.324 m/s -9.065 m/s = -23.389 m/s

This is related to the distance traveled by ...

  v² = 2dg . . . . . where g is the acceleration and d is the distance traveled

  d = v²/(2g) = 23.389²/(2·9.8) = 27.911 . . . . meters

The object travels a total distance of about 27.911 meters.

_____

The attached graph shows height vs. time.

The mass of a particular eagle is twice that of a hunted pigeon. Suppose the pigeon is flying north at ,2=17.1 m/s when the eagle swoops down, grabs the pigeon, and flies off. At the instant right before the attack, the eagle is flying toward the pigeon at an angle =52.7 ° below the horizontal and a speed of ,1=41.5 m/s.

Answers

Answer:

31.4 m/s

44.4°

Explanation:

Momentum is conserved in the horizontal direction:

pₓᵢ = pₓ

m vᵢ₂ + 2m vᵢ₁ cos θ = (m + 2m) vₓ

vᵢ₂ + 2 vᵢ₁ cos θ = 3 vₓ

17.1 m/s + 2 (41.5 m/s) (cos -52.7°) = 3 vₓ

vₓ = 22.5 m/s

Momentum is conserved in the vertical direction:

pᵧᵢ = pᵧ

2m vᵢ₁ sin θ = (m + 2m) vᵧ

2 vᵢ₁ sin θ = 3 vᵧ

2 (41.5 m/s) (sin -52.7°) = 3 vᵧ

vᵧ = -22.0 m/s

The speed is:

v = √(vₓ² + vᵧ²)

v = √((22.5 m/s)² + (-22.0 m/s)²)

v = 31.4 m/s

The direction is:

θ = atan(vᵧ / vₓ)

θ = atan(-22.0 m/s / 22.5 m/s)

θ = -44.4°

The speed of the eagle at that instant is 31.4 m/s while it moves off in the direction of 44.4°.

Since momentum is conserved horizontally;

17.1 m/s + 2 (41.5 m/s) (cos -52.7°) = 3 vx

vx = 17.1 m/s + 2 (41.5 m/s) (cos -52.7°)/3

vx =  22.5 m/s

Also, momentum is conserved vertically hence;

2 (41.5 m/s) (sin -52.7°) = 3 vy

vy = 2 (41.5 m/s) (sin -52.7°) /3

vy =  -22.0 m/s

The effective speed therefore, is;

v = √((22.5 m/s)² + (-22.0 m/s)²)

v = 31.4 m/s

The direction of this effective speed is;

θ = tan-1(22.0 m/s / 22.5 m/s)

θ = 44.4°

Learn more: https://brainly.com/question/13322477

How much work is done by 0.30 m of gas if its pressure increases by 8.0 x105 Pa and the volume remains constant
Salerno

Answers

Answer:

0

Explanation:

if the volume remains constans, the works is 0 because the equation

W = P . ∆V

P = pressure

∆V = change in volume

250cm3 of fres
er of density 1000kgm-3 is mixed with 100cm3 of sea water of density 1030kgm-3. Calculate the density of the mixture. *​

Answers

Answer:

1008.57kg/m3

Explanation:

Now the mass of fresh water is 250×1000 /1000000 = 0.25kg

Now the mass of salt water is

100×1030 /1000000 = 0.103kg

Note Density = mass / volume

Mass = volume × density

Note that converting from cm3 to m3 we divide by 1000000

Total mass = 0.25kg +0.103kg= 0.353kg.

Total volume also is (250 +100 )/1000000= 35 × 10^{-5}m3

Hence the density of the mixture= total mass / total volume

0.353kg/35 × 10^{-5}m3=1008.57kg/m3

Astronaut Flo wishes to travel to a star 20 light years away and return. Her husband Malcolm, who was the same age as Flo when she departs, stays home (baking cookies). If Flo travels at a constand speed of 80% of the speed of light (except for a short time to turn around), how much younger than Malcolm will Flo be when she returns? How long does Malcolm sit around baking cookies? How far is the distance to Flo?

Answers

Answer:

a. about 20 years younger

b. Malcolm sits around for 49.94 years

c. 2.268x[tex]10^{17}[/tex] m

Explanation:

light travels 3x[tex]10^{8}[/tex] m in one seconds

in 20 years that will be 3x[tex]10^{8}[/tex] x 20 x 60 x 60 x 24 x 365 = 1.89x[tex]10^{17}[/tex] m

for the to and fro journey, total distance covered will be 2 x 1.89x[tex]10^{17}[/tex]  = 3.78x[tex]10^{17}[/tex] m

Flo's speed = 80% of speed of light = 0.8 x 3x[tex]10^{8}[/tex]  = 2.4x[tex]10^{8}[/tex]  m/s

time that will pass for Malcolm will be  distance/speed = 3.78x[tex]10^{17}[/tex] /2.4x[tex]10^{8}[/tex]  

= 1575000000 s = 49.94 years

the relativistic time t' will be

t' = t x [tex]\sqrt{1 - \frac{v^{2} }{c^{2} } }[/tex]

t' = 49.94 x [tex]\sqrt{1 - 0.8^{2} }[/tex]

t' = 49.94 x 0.6 = 29.96 years       this is the time that has passed for Flo

this means that Flo will be about 20 years younger than Malcolm when she returns

relativistic distance is

d' = d x [tex]\sqrt{1 - \frac{v^{2} }{c^{2} } }[/tex]

d' = 3.78x[tex]10^{17}[/tex] x [tex]\sqrt{1 - 0.8^{2} }[/tex]

d' = 3.78x[tex]10^{17}[/tex] x 0.6

d' = 2.268x[tex]10^{17}[/tex] m     this is how far it is to Flo

the distance between 2 station is 5400 m find the time taken by a train to cover this distance, if the train travels with speed 60m/s

Answers

Answer:

I dont know bro

Explanation:

Ask an expert

Answer:

Time=90s

Explanation:

Speed=distance /time

[tex]60 = \frac{5400}{t} where \: t \: is \: time \\60t = 5400 \\ t = \frac{5400}{60} \\ t =90 \\ hope \: this \: helps..good \: luck [/tex]

Sara walks part way around a swimming pool. She walks 50 yards north, then
20 yards east, then 50 yards south. The magnitude of her total displacement
during this walk is
yards.

Answers

Answer:

20 Yards

Explanation:

|---20----|

|            |

| 50       |50

|---D--->|

Start      End

Total displacement(D)  20 yards (East).

When jumping straight down, you can be seriously injured if you land stiff-legged. One way to avoid injury is to bend your knees upon landing to reduce the force of the impact. A 73.0 kg man just before contact with the ground has a speed of 6.46 m/s. In a stiff-legged landing he comes to a halt in 2.07 ms. Calculate the average net force that acts on him during this time

Answers

Answer:

Explanation:

The man comes to halt due to reaction force acting on him in opposite direction . If R be the reaction force

impulse by net  force = change in momentum

Net force = R - mg , mg is weight of the man .

( R-mg ) x 2. 07 x 10⁻³ = 73 x 6.46 - 0

R - mg = 227.81 x 10³

Average net force = 227.81 x 10³ N .

A 328-kg car moving at 19.1 m/s in the x direction hits from behind a second car moving at 13.0 m/s in the same direction. If the second car has a mass of 790 kg and a speed of 15.1 m/s right after the collision, what is the velocity of the first car after this sudden collision

Answers

Answer:

14.04 m/s

Explanation:

To find the velocity of the first car after the collision, we can use the equation of conservation of momentum:

m1v1 + m2v2 = m1'v1' + m2'v2'

We have the following data:

m1 = m1' = 328,

m2 = m2' = 790,

v1 = 19.1,

v2 = 13,

v2' = 15.1.

Using this data, we can find v1' (final velocity of the first car):

328 * 19.1 + 790 * 13 = 328 * v1' + 790 * 15.1

16534.8 = 328 * v1' + 11929

328 * v1' = 4605.8

v1' = 14.04 m/s

A quartz sphere is 14.0 cm in diameter. What will be its change in volume if its temperature is increased by 305°F? The coefficient of volume expansion of quartz is 1.50×10^6/°C. Answer in cm^3 .

Answers

Answer:

  0.365 cm³

Explanation:

The change in volume is found by multiplying the coefficient of expansion by the volume and the temperature change. The temperature change is in °F, but the expansion coefficient is per °C, so we need to convert the temperature scale in the computation.

  ΔV = V·Ce·ΔT

  = (π/6·d³)(1.5×10⁻⁶/°C)((5 °C)/(9 °F))(305 °F)

  = (1436.76 cm³)(1.5×10⁻⁶/°C)(169.44 °C)

  = 0.365 cm³ . . . . increase in volume

The potential (relative to infinity) at the midpoint of a square is 3.0 V when a point charge of Q is located at one of the corners of the square. What is the potential (relative to infinity) at the center when each of the other corners is also contains a point charge of Q

Answers

Answer:

12.0 V

Explanation:

Data :

Potential difference due to a single charge (+Q), E = 3.0 V

 

The Electric potential for the system of charges is given as:

[tex]E=\frac{1}{4\pi \epsilon_o}[\Sigma\frac{Q}{r}][/tex]

for single charge, E = 3.0 V = [tex]\frac{1}{4\pi \epsilon_o}[\frac{Q}{r}][/tex]  ->eq(1)

And for 4 charges:

[tex]E=\frac{1}{4\pi \epsilon_o}[4\frac{Q}{r}][/tex] -eq(2)

from eq(1) and (2) we have

E = 4 × 3.0 V = 12 V

The motion of an object undergoing constant acceleration can be modeled by the kinematic equations. One such equation is xf=xi+vit+12at2 where xf is the final position, xi is the initial position, vi is the initial velocity, a is the acceleration, and t is the time. Let's say a car starts with an initial speed of 15 m/s, and moves between the 1000 m and 5000 m marks on a roadway in a time of 60 s. What is its acceleration?

Answers

Answer:

a = 1.72 m/s²

Explanation:

The given kinematic equation is the 2nd equation of motion. The equation is as follows:

xf = xi + (Vi)(t) + (1/2)(a)t²

where,

xf = the final position =  5000 m

xi = the initial position = 1000 m

Vi = the initial velocity = 15 m/s

t = the time taken = 60 s

a = acceleration = ?

Therefore,

5000 m = 1000 m + (15 m/s)(60 s) + (1/2)(a)(60 s)²

5000 m = 1000 m + 900 m + a(1800 s²)

5000 m = 1900 m + a(1800 s²)

5000 m - 1900 m = a(1800 s²)

a(1800 s²) = 3100 m

a = 3100 m/1800 s²

a = 1.72 m/s²

Calculate the energy released by the electron-capture decay of 5727Co. Consider only the energy of the nuclei (ignore the energy of the surrounding electrons). The following masses are given:
5727Co: 56.936296u
5726Fe: 56.935399u
Express your answer in millions of electron volts (1u=931.5MeV/c2) to three significant figures.
A negligible amount of this energy goes to the resulting 5726Fe atom as kinetic energy. About 90 percent of the time, after the electron-capture process, the 5726Fe nucleus emits two successive gamma-ray photons of energies 0.140MeV and 1.70 102MeV in decaying to its ground state. The electron-capture process itself emits a massless neutrino, which also carries off kinetic energy. What is the energy of the neutrino emitted in this case?
Express your answer in millions of electron volts.

Answers

Answer:

Explanation:

⁵⁷Co₂₇  + e⁻¹  =  ²⁷Fe₂₆

mass defect = 56.936296 + .00055 - 56.935399

= .001447 u

equivalent energy

= 931.5 x .001447 MeV

= 1.3479 MeV .

= 1.35 MeV

energy of gamma ray photons = .14  + .017

= .157 MeV .

Rest of the energy goes to neutrino .

energy going to neutrino .

= 1.35 - .157

= 1.193 MeV.

An electric point charge of Q = 22.5 nC is placed at the center of a cube with a side length of a = 16.3 cm. The cube in this question is only a mathematical object, it is not made out of any physical material. What is the electric flux through all six sides of the cube?

Answers

Answer:

The electric flux is  [tex]\phi = 2.5 *10^{3} \ Nm^2 \cdot C^{-1}[/tex]

Explanation:

From the question we are told that

  The magnitude of the electric point charge  [tex]q = 22.5 nC = 22.5 *10^{-9} \ C[/tex]

   The length of the one side of the cube is [tex]l = 16.3 \ cm = 0.163 \ m[/tex]

   The number of  sides is  [tex]N= 6[/tex]  

The electric flux according to Gauss law is mathematically evaluated as

          [tex]\phi = \frac{q}{\epsilon_o}[/tex]

Where [tex]\epsilon _ o[/tex] is the permitivity of free space with value  [tex]\epsilon_o = 8.85*10^{-12}\ m^{-3} \cdot kg^{-1}\cdot s^4 \cdot A^2[/tex]

  substituting values

        [tex]\phi = \frac{22.5 *10^{-9}}{8.85 *10^{-12}}[/tex]

         [tex]\phi = 2.5 *10^{3} \ Nm^2 \cdot C^{-1}[/tex]

         

Suppose your hair grows at the rate of 1/55 inch per day. Find the rate at which it grows in nanometers per second. Because the distance between atoms in a molecule is on the order of 0.1 nm, your answer suggests how rapidly atoms are assembled in this protein synthesis.

Answers

Answer:5.35nm

Explanation:

Consider that 1 inch is = 0.0254m

we have,

1m= 1x10^9 nm  

While:

0.0254m = 2.54x10^7nm  

1/55 (2.54x10^7) = 4.6181 x 10^5nm  

1 day= 24 hrs  

= (24x60) when calculating in min  

= (24x60x60) calculating in seconds we have:

= 8.64x10⁴sec  

In 8.64x10^4 seconds, the hair grows by 4.6181 x 10^5nm

Therefore, the amount by which the hair grows in 1 second  will be;

= (4.6181 x 10^5)/(8.64x10^4)  

= 5.35nm  

The rate of growth will be 5.35nm

The temperature at the surface of the Sun is approximately 5,300 K, and the temperature at the surface of the Earth is approximately 293 K. What entropy change of the Universe occurs when 6.00 103 J of energy is transferred by radiation from the Sun to the Earth?

Answers

Answer:

The entropy change of the Universe that occurs is 19.346 J/K

Explanation:

Given;

temperature of the sun, [tex]T_s[/tex] = 5,300 K

temperature of the Earth, [tex]T_E[/tex] = 293 K

radiation energy transferred by the sun to the earth, E = 6000 J

The sun loses Q of heat and therefore decreases its entropy by the amount

[tex]\delta S_{sun} = \frac{-Q}{T_s}[/tex]

The earth gains Q of heat and therefore increases its entropy by the amount

[tex]\delta S_{Earth} = \frac{-Q}{T_E}[/tex]

The total entropy change is:

[tex]\delta S_{Earth} + \delta S_{sun} = \frac{Q}{T_E} -\frac{Q}{T_S} \\\\ = Q(\frac{1}{T_E} -\frac{1}{T_S} )\\\\= 6000(\frac{1}{293} -\frac{1}{5300} )\\\\=6000(0.0032243)\\\\= 19.346 \ J/K[/tex]

Therefore, the entropy change of the Universe that occurs is 19.346 J/K

Having aced your Physics 2111 class, you get a sweet summer-job working in the International Space Station. Your room-mate, Cosmonaut Valdimir tosses a banana at you at a speed of 16 m/s. At exactly the same instant, you fling a scoop of ice cream at Valdimir along exactly the same path. The collision between banana and ice cream produces a banana split 8.2 m from your location 1.4 s after the banana and ice cream were launched.

1. How fast did you toss the ice cream?

2. How far were you from Valdimir when you tossed the ice cream?

Answers

Answer:

a

The speed is   [tex]s = 5.857 m/s[/tex]

b

The distance is  [tex]D = 22.4 \ m[/tex]

Explanation:

From the question we are told that

     The speed of the banana is  [tex]v = 16 \ m/s[/tex]

   The distance from my  location is  [tex]d = 8.2 \ m[/tex]  

     The time taken is  [tex]t = 1.4 \ s[/tex]

The speed of the ice cream is

          [tex]s = \frac{d}{t}[/tex]

substituting values

        [tex]s = \frac{8.4}{1.4}[/tex]

        [tex]s = 5.857 m/s[/tex]

The distance of separation between i and Valdimir is the same as the distance covered by the banana

   So  

          [tex]D = v * t[/tex]

substituting values

        [tex]D = 16 * 1.4[/tex]

        [tex]D = 22.4 \ m[/tex]

     

help yall 13 points!!

Answers

Answer:

Explanation:

12.)

A. Opposite poles attract

B. Same poles repel

13.)

IDK

A 1.0 m string with a 5 g stopper on the end is whirled in a vertical circle. The speed of the stopper is 8 m/s at the top of the circle. (A) What is the speed of the stopper at the bottom of the circle? (HINT: Use energy conservation principles!) (10.2 m/s) (B) What is the tension in the string when the stopper is at the top of the circle? (0.27 N) (C) What is the tension in the string when the stopper is at the bottom of the circle?

Answers

Answer:

Explanation:

A )

At the bottom of the circle , the potential energy of the stopper is converted into kinetic energy

1/2 m V² = mg x 2r + 1/2 mv²

m is mass of stopper , V is velocity at the bottom , r is radius of the circular path which is length of the string , v is velocity at the top

1/2  V² = g x 2r + 1/2 v²

 V² = g x 4r +  v²

 V² = 9.8 x 4 +  8²

V² = 103.2

V = 10.16 m/s

B )

If T be the tension at the top

Net downward force

= mg + T . This force provides centripetal force for the circular motion

mg +T = mv² / r

T =   mv²/r -mg

= m ( v²/r - g )

= .005 ( 8²/1 -g )

= .005 x 54.2

= .27 N .

C ) At the bottom

Net force = T  - mg , T is tension at the bottom , V is velocity at bottom

T-mg = mV²/r

T = m ( V²/r +g )

= .005 ( 10.16²/1 +9.8)

= .005 x 113

= .56 N .

Other Questions
Which fictional character would you allude to? Why? The Model E extender fits with the 2 inch heavy duty hitches.The contract calls for 247 Model E extenders per week to be delivered in equal installments over the 16 weeks of the contract. The goal of Alpha Assemblies is to work 40 hours per week. The actual work time for completing the Model E extenders has been broken down by process in the table below. Also provided is the anticipated learning rate for each process. All processes must be performed in sequence and each step has its own separate and unique workcenter. To achieve the goal of working 40 hours per week or less, the cycle time must be lower than the takt time. What is the expected Cycle Time for Model E in Week 16? Note: learning is applied to the batch quantity per week. Do not try to break out the units within a week.ProcessTime Required per UnitPredecessor TaskLearning RateA982B12A86C18B81D9C90E12D80F17E88G14F83H12G85I8H82 Trans-4-hexen-3-ol can be synthesized starting from acetaldehyde. One of the key reagents is ethyl grignard. 1. Synthesize ethyl grignard from acetaldehyde in the steps below using the reagents provided.2. Synthesize (trans)-4-hexen-3-ol from acetaldehyde. In contemporary times, many people in addition to the artist help to determine what art we see, and to some extent influence what is considered to be art through art exhibitions and other media. True or false What is the distance between the following points? The majority of vaccines work by eliciting pathogen-specific antibodies that circulate in our bodies and protect us in the event that we are later exposed to that specific pathogen. For most viruses and bacterial toxins that we are vaccinated against, these pre-existing antibodies are protective because: Looking up your name on a list is an example ofSelect oneO a Extensive readingO Close readingO C. ScanningOd Skimming License plates in Ontario have four letters (A-2) followed by three numbers (0-9). Letters and numbers can be repeated.How many different license plates could be made?676,000480,835,2004,569,760,00026,000 work out the surface area of a sphere please help if u get it correct ill give h brainlest Which of these is a symbol in the novel The Great Gatsby A) a dying tree on the Gatsby lawn B) A foghorn C) A green light D) A pair of hands on a billboard Suppose that a wave has a period of 0.03 seconds what is its frequency be sure to show the steps for your work the average mark of candidates in an aptitude test was 138.5 with a standard deviation of 10.6. three scores extracted from the test are 178,122,100.what is the average of the extracted scores that are extreme value how many electrons does phosphorus need to gain to have a stable outer electron shell1234 what are the differences between fee-for-service health care model and single payer health care model Which force does not operate at a distance of 1 m?A. Weak nuclearO B. ElectricC. GravitationalD. Magnetic SL Part 1: Function Families > 01: Graphs and Functions22. Find the constant of variation k for the direct variation.f(x)2-17-3.5Ok= -2Ok=0Ok=0.5Ok= -0.5 The year-end 2009 balance sheet for Tom's Copy, Inc. lists common stock ($1.00 par value) of $ 5,870 , capital surplus of $ 17,290 and retained earnings of $ 47,076 . On the 2010 year-end balance sheet, retained earnings are listed as $ 50,350 . The firm's net income in 2010 was $ 9,811 . No stock was issued or repurchased in 2010. What were dividends per share paid by the firm in 2010 Which expession is equivalent to -3(6c + 2) + 5c Examine the following gizmo problem and choose the best answer Please answer this correctly