Answer:
Maximum pressure = 4450 N/m²
Explanation:
We'll begin by calculating the volume of the block. This can be obtained as follow:
Volume (V) = 5 cm × 3 cm × 2 cm
V = 30 cm³
Next, we shall determine the mass of the block. This can be obtained as follow:
Density = 8.9 g/cm³
Volume = 30 cm³
Mass =?
Density = mass /volume
8.9 = mass / 30
Cross multiply
Mass = 8.9 × 30
Mass = 267 g
Next, we shall covert 267 g to Kg.
1000 g = 1 Kg
Therefore,
267 g = 267 g × 1 Kg / 1000
267 g = 0.267 Kg
Thus, the mass of the block is 0.267 Kg
Next, we shall determine the force.
Force of gravity (g) = 10 N/Kg
Mass (m) = 0.267 Kg
Force (F) =?
F = mg
F = 0.267 × 20
F = 2.67 N
Next, we shall determine the minimum area since we are trying to obtain the maximum pressure. This can be obtained as follow:
Minimum area = 3 cm × 2 cm
Covert each measurement to metre (m) by dividing each measurement by 100
Minimum area = 0.03 m × 0.02 m
Minimum area = 0.0006 m²
Finally, we shall determine the maximum pressure. This can be obtained as follow:
Force (F) = 2.67 N
Minimum area = 0.0006 m²
Maximum pressure =?
Maximum pressure = Force /minimum area
Maximum pressure = 2.67 / 0.0006
Maximum pressure = 4450 N/m²
a force of 2N exerted on a block causes it to accelerate at 4m/s^2 over a frictionless surface. calc the mass of the block
A cruise ship travels across a river at 25 meters per minute. If the river is 6200 meters wide, how long
does it take the ship to reach the other side.
Answer:
248 minutes
Explanation:
6200/25=248
This means there is 248 25s in 6200
which means it will take 248 minutes to travel through the river
Also here's a neat trick:
The units for speed is meters/minute
The units for distance is meters
Dividing distance by speed will cancel out the meters and leave only the speed.
A truck skids for a distance of 25m with the road pushing on its tires with force of 1500N as its brakes are applied. What is the change in kinetic energy for the truck?
Answer:
37500 J
Explanation:
Law of conservation of energy: Its states that energy can neither be created nor destroyed but it can be transformed from one form to another.
Applying the law of conservation of energy.
The change in kinetic energy for the truck = Net work done by the truck skids
ΔK.E = F×d.................... Equation 1
Where ΔK.E = Change in kinetic energy, F = Force, d = distant.
Given: F = 1500 N, d = 25 m
Substitute these values into equation 1
ΔK.E = 1500×25
ΔK.E = 37500 J
Calculate the weight of a 2.3 kg squirrel
Answer:
Lemme think rq
*inserts writing noises*
*insert intese thinking*
*insert big brain moment*
Well the weight IS 2.3 kg so I think the weight of a squirrel is 2.3 kg
how can the conductivity of a semiconductor be increased?
Suppose that we replace the aluminum with a mystery metal and repeat the experiment in the video. As in the video, the mass of the metal is the same as that of the water. Room temperature is about 20∘C before the start of the experiment. The water heats up to 40∘C, and the mystery metal heats up to 80∘C. Compared to that of water, the heat capacity of our mystery metal is
Answer: b) one-third as great.
Explanation:
The options include:
a) three times greater.
b) one-third as great.
c) half as great.
d) two times greater.
e) the same.
Since the water heats up to 40°C and the room temperature is about 20°C before the start of the experiment, heat absorbed will be: (40°C-20°C).= 20°C
Since mystery metal heats up to 80∘C and the room temperature is about 20°C before the start of the experiment, heat absorbed will be: (80°C-20°C).= 60°C.
Therefore, based on the calculation, when compared to that of water, the heat capacity of our mystery metal is (20/60) = 1/3 one-third as great.
Someone please help me with this:(
Answer:
The first or last one
Explanation:
Because they both are right
A family took a trip in a car traveling East from Greensboro to Wilmington, NC. Use the Graph to answer the questions below.
1: Calculate the average speed of the trip.
2: What was the average velocity of the car?
Note: Please don't put weird stuff or completely off-topic stuff, I really need help for this homework! Thanks!
Answer:
1). Average speed = 1.5 m per second
2). Average velocity = 1.5 m per second
Explanation:
1). Since, speed is a scalar quantity
Therefore, average speed of the trip = [tex]\frac{\text{Total distance covered}}{\text{Total time taken}}[/tex]
From the graph attached,
Total distance covered = 10 + 10 + 20 + 0 + 20 + 30
= 90 meters
Total time taken = 60 seconds
Average speed = [tex]\frac{90}{60}[/tex]
= 1.5 meter per second
2). Velocity is a vector quantity.
Therefore, average velocity = [tex]\frac{\triangle d}{\triangle t}[/tex]
= [tex]\frac{d_{60}-d_0}{60-0}[/tex]
= [tex]\frac{90-0}{60-0}[/tex]
= 1.5 meter per second
Convertir 1200 ms a cs
Convertir 0,3 mm a cm.
Answer:
You can do the reverse unit conversion from cm/s to m/s, or enter any two units below: Metre per second (U.S. spelling: meter per second) is an SI derived unit of both speed (scalar) and velocity (vector quantity which specifies both magnitude and a specific direction), defined by distance in metres divided by time in seconds.
Explanation:
Which statement compares the strengths of electric forces between particles of matter?
Please don't just guess for points, if your answer is wrong i'll report it.
A. Hydrogen bonds are stronger than ionic bonds but weaker than Van der Waals forces.
B. Metallic bonds are stronger than hydrogen bonds but weaker than ionic bonds.
C. Hydrogen bonds are weaker than Van der Waals forces but stronger than metallic bonds.
D. Metallic bonds are weaker than hydrogen but are stronger than ionic bonds.
B. Metallic bonds are stronger than hydrogen bonds but weaker than ionic bonds.
The statement is discussing the relative strengths of different types of electric forces that can exist between particles of matter.
Metallic bonds are formed by the sharing of electrons between atoms in a metal, and are considered relatively strong. Hydrogen bonds are formed between molecules that contain hydrogen and are relatively weak compared to metallic bonds.
Ionic bonds are formed between positively and negatively charged ions and are generally considered to be the strongest of these three types of bonds. Thus, the statement concludes that metallic bonds are stronger than hydrogen bonds but weaker than ionic bonds in terms of their relative strengths.
For more such question on hydrogen
https://brainly.com/question/2111051
#SPJ11
to lift
With a pulley system, you use more rope (distance), but need less (blank) to lift
the load
Ok so it is working ok!
a car travels for two hours at an average speed of 36 km/h how far will the car travel
Answer:
259200
Explanation:
use the formula distance= speed x time
change the 2 hours to seconds (7200) and multiply that number by 36 and it'll give you 259200
Answer:
12 kilometers and hour
Explanation:
What is sin(77°)? plz help
Answer:
Value of Sin(77 degree) = 0.97437006
Degree / Radian Function
(angle in degree) (angle in radian) Sin Cos Tan Cot Sec Cosec SinH CosH TanH CosecH SecH CotH Arc Sin Arc Cos Arc Tan Arc Cosec Arc Sec Arc Cot
can someone help me plz
Answer:
Positive I believe... because if you drop it it is negative so picking up a book means positive. thanks for the points though!
Explanation:
Can I have brainliest please? <3
An object is pulled northward at 20 N and southward at 15 N. What is the direction and force of the object?
Answer:
It moves northward at 5N
Explanation:
PLS HELP
According to the theory of spontaneous generation, tadpoles were believed to arise form dead flesh. True or False.
A.
FALSE
B.
TRUE
"This was the idea that non-living objects can give rise to living organisms."
Which one of the following is an example of an indicator?
A. High Concentration
B. Electricity
C. Litmus Paper
D. Presence of H ions in solutions
Answer:
Litmus Paper
Explanation:
Answer:
A
Explanation:
well because I just answer that question too
How long will it take a sample of lead-212 (which has a half-life of 10.64 h) to decay to one-eighth its original strength?
Answer:
31.92 h
Explanation:
We'll begin by calculating the number of half-lives that has elapsed. This can be obtained as follow:
Original amount (N₀) = 1
Amount remaining (N) = ⅛
Number of half-lives (n) =?
N = 1/2ⁿ × N₀
⅛ = 1/2ⁿ × 1
Cross multiply
2ⁿ = 8
Express 8 in index form with 2 as the base.
2ⁿ = 2³
n = 3
Thus, 3 half-lives has elapsed.
Finally, we shall determine the time. This can be obtained as follow:
Half-life (t½) = 10.64 h
Number of half-lives (n) = 3
Time (t) =?
n = t / t½
3 = t / 10.64
Cross multiply
t = 3 × 10.64
t = 31.92 h
Therefore, it will take 31.92 h for lead-212 to decay to one-eighth its original strength.
Which of the following is not a unit of volume?
A. L
B. mL
C. m^3
D. cm^2
Explanation:
D. cm^2
It's a unit for quadruple centimeters. All of the others are used to charge the amount of water in a specific bowl etc.
Explain retrograde motion and why it confused early astronomers as they viewed the motion of objects in the sky.
Answer:
Explanation:
Retrograde motion in astronomy is, in general, orbital or rotational motion of an object in the direction opposite the rotation of its primary, that is, the central object (right figure). It may also describe other motions such as precession or nutation of an object's rotational axis. Prograde or direct motion is more normal motion in the same direction as the primary rotates. However, "retrograde" and "prograde" can also refer to an object other than the primary if so described. The direction of rotation is determined by an inertial frame of reference, such as distant fixed stars.
Retrograde motion occurs when a planet far from another planet and from which it is seen rotates at lower speed, creating the impression that it is "retrograding" with respect to the other planet.
Early astronomers get confused as they viewed the motion in the sky because they tried to explain it in terms of the geocentric theory.
Let suppose that we have a planetary system formed by a star and two planets rotating uniformly around the star. Besides, we assume that both planets are rotating at different velocities, and that planet A is more far away from the star than planet B, then the velocity of the planet A relative to planet B is:
[tex]\vec v_{A/B} = \vec {v}_{A}- \vec {v}_{B}[/tex] (1)
A retrograde motion of planet A occurs when [tex]\|\vec v_{A/B}\|\ne 0[/tex] and if [tex]\|\vec v_{A}\| < \|v_{B}\|[/tex] at least. In other words, retrograde motion exists when speed of planet A is less than speed of planet B, creating the impression that planet A is "retrograding" with respect to planet B. This question is easy to solve and to explain by considering the star as an inertial framework, base of the heliocentrical model.
Early astronomers were confused and unable to explain the phenomenon due to their adherence to geocentrical model, which assumed the Earth was the center of the solar system.
We kindly invite to check this question on retrograde motion: https://brainly.com/question/13586212
So what is 27+22? Is it
A 8338
B 8282
C 8228
D 8234
Answer:
You put the add sign, so it would be 49. I don't believe that is what you meant to put though.
Explanation:
i gotchu, 27+22 so you take the 8 and multiply that by the number of times you blink every 2 minutes and then divide that by 0×1 and carry the 3 and that gives you -7
What is Heat engine?
Answer:
An engine made of heat!
Okay actual answer, A heat engine is a mechanical energy converter that transforms heat or thermal energy to mechanical energy.
Objects A and B are brought close to each other. Object A will soon become positively charged. Identify the charge that must transfer for
this
situation to occur.
The weight of a cuboid box is 288 N. Find its mass.
Answer:
29.39 kg
Explanation:
From the question,
W = mg...................... Equation 1
Where W = weight of the cuboid box, m = mass of the cuboid box, g = acceleration due to gravity.
make m the subject of the equation
m = W/g.................. Equation 2
Given: W = 288 N
Constant: g = 9.8 m/s²
Substitute these values into equation 2
m = 288/9.8
m = 29.39 kg
What is the difference in average speed between two car, one that traveled 150 kilometers in 5 hours and the other that traveled 130 kilometers in the same time?
Answer:
just like he saide you can downloude the answer
Which law best describes contact force
A.
second law
B.
third law
C.
law of gravity
D.
first law
Answer: the third law
Explanation:
The process of deforestation affects the different biochemical cycles on earth. Give three examples of how deforestation will affect the various cycles.
Answer:
The loss of trees and other vegetation can cause climate change, desertification, soil erosion, fewer crops, flooding, increased greenhouse gases in the atmosphere, and a host of problems for indigenous people.
If the two forces on an object are equal in size and opposite in direction, the forces are balanced, and no change
in motion results. Which of the following situations is an example of balanced force acting upon an object?
O A rope being pulled from both sides with equal force
O An 11-gram pen falling off a table onto the floor
O A car moving constantly at 30 miles per hour
O A rock accelerating as it rolls down a hill
Answer:
a rope being pulled from both sides with equal force
Explanation:
:)
A family is driving from Vancouver to Calgary, a distance of 907.3 km. During the first 300 km, they average 92 km/h. They stop for lunch for 38 min. They arrive in Calgary 8 h and 21 min after their lunch break.. What was their average speed (in km/h) for the entire journey, including the break?
Answer:
89 i would say
Explanation:
A. Dashed Line
B. Solid Line
