A balloon with 0. 50 L of nitrogen is placed in a freezer at 273 K. What will the new


volume be if the temperature of the balloon is raised to 325 K when removed from the


freezer?

A few errors about hydrogen peroxide's breakdown can be found throughout the discourse. Instead of being destroyed, the product is transformed into water and oxygen.

Catalase enzymes are found in both plants and animals, and they catalyse the conversion of hydrogen peroxide into water and oxygen. Water and oxygen are naturally formed from hydrogen peroxide, although the process is extremely slow.

Time how long it takes a disc of filter paper to rise a specified distance in a test tube containing hydrogen peroxide solution as one method of determining the rate.

To know more about peroxide's visit:-

https://brainly.com/question/29102186

#SPJ1

In a 23.5 mol sample of C₇H₅N₃O₆, there are 6.87 moles of nitrogen atoms and 8.79 moles of oxygen atoms.

In order to determine the number of moles of nitrogen and oxygen atoms in a 23.5 mol sample of C₇H₅N₃O₆, we first need to look at the chemical formula for this compound.

From the formula, we can see that there are 7 nitrogen atoms and 9 oxygen atoms present in each molecule of C₇H₅N₃O₆.

To calculate the number of moles of nitrogen atoms, we multiply the total number of moles by the mole fraction of nitrogen in the compound:

Moles of nitrogen = 23.5 mol x (7 nitrogen atoms / 24 total atoms)
Moles of nitrogen = 6.87 mol

Similarly, to calculate the number of moles of oxygen atoms, we use the mole fraction of oxygen in the compound:

Moles of oxygen = 23.5 mol x (9 oxygen atoms / 24 total atoms)
Moles of oxygen = 8.79 mol

Therefore, there are approximately 6.87 moles of nitrogen atoms and 8.79 moles of oxygen atoms in a 23.5 mol sample of C₇H₅N₃O₆.

Learn more about moles at https://brainly.com/question/29367909

#SPJ11

The rate of appearance of [tex]NO_{2}[/tex] is 8.4 x [tex]10^{-7}[/tex] m/s and the rate of appearance of [tex]O_{2}[/tex] is 2.1 x [tex]10^{-7}[/tex] m/s.

Given the reaction: 2[tex]N_{2}O_{5}[/tex](g) → 4[tex]NO_{2}[/tex](g) + [tex]O_{2}[/tex](g)

The rate of decomposition of [tex]N_{2}O_{5}[/tex] is 4.2 x [tex]10^{-7}[/tex] m/s.

a) To find the rate of appearance of [tex]NO_{2}[/tex], we will look at the stoichiometric coefficients in the balanced reaction. For every 2 moles of [tex]N_{2}O_{5}[/tex] decomposed, 4 moles of [tex]NO_{2}[/tex] are produced. So, the ratio is 4:2, which simplifies to 2:1.

Rate of appearance of [tex]NO_{2}[/tex] = (Rate of decomposition of [tex]N_{2}O_{5}[/tex]) x (2/1)
Rate of appearance of [tex]NO_{2}[/tex] = (4.2 x [tex]10^{-7}[/tex] m/s) x 2
Rate of appearance of [tex]NO_{2}[/tex] = 8.4 x [tex]10^{-7}[/tex] m/s

b) For the rate of appearance of [tex]O_{2}[/tex], we will again look at the stoichiometric coefficients. For every 2 moles of [tex]N_{2}O_{5}[/tex] decomposed, 1 mole of [tex]O_{2}[/tex] is produced. The ratio is 1:2.

Rate of appearance of [tex]O_{2}[/tex] = (Rate of decomposition of [tex]N_{2}O_{5}[/tex] ) x (1/2)
Rate of appearance of [tex]O_{2}[/tex] = (4.2 x [tex]10^{-7}[/tex] m/s) x 1/2
Rate of appearance of [tex]O_{2}[/tex] = 2.1 x [tex]10^{-7}[/tex] m/s

Thus, the rate of appearance of [tex]NO_{2}[/tex] is 8.4 x [tex]10^{-7}[/tex] m/s and the rate of appearance of [tex]O_{2}[/tex] is 2.1 x [tex]10^{-7}[/tex] m/s.

To know more about rate of reaction visit:

https://brainly.com/question/30546888

#SPJ11

Answer:

Hello! This lab is all about heat, which is a measure of energy in a system. In the first part, we'll be examining what happens to a gas when the temperature changes. For this part, you will need a small mouth bottle, a coin, a large container, cold water, and measuring cups. In the second part, we'll be using the idea of energy transfer to move water. For this part, you will need food coloring, water, a large bowl, a small glass, cling film, a small object, and sunny days. Follow the procedures carefully and answer the questions provided to understand the concepts of heat and energy transfer. Don't hesitate to reach out if you have any questions!

C water = 1 cal/g ℃

87.88% of the carbon in the fuel has been converted to CO instead of CO2 during the combustion of ethylene with 33% excess air.

Combustion is a chemical reaction in which a substance reacts with oxygen to release energy in the form of heat and light. In this case, ethylene is being burned with 33% excess air, meaning there is more oxygen available than required for complete combustion.

The analysis of the dry base combustion products indicates that 6.06% of the products are CO2 by volume. Since the rest of the results have been lost, we can only work with the given information.

To determine the percentage of carbon in the fuel converted to CO instead of CO2, we need to first find the percentage of carbon converted to CO2. In complete combustion, each carbon atom in ethylene (C2H4) would react with oxygen to form one molecule of CO2. The balanced chemical equation for complete combustion of ethylene is:

C2H4 + 3O2 -> 2CO2 + 2H2O

Now, we know that 6.06% of the combustion products are CO2. Since ethylene has two carbon atoms, the percentage of carbon in the fuel converted to CO2 is 2 x 6.06% = 12.12%.

To find the percentage of carbon converted to CO instead of CO2, we need to subtract this percentage from the total carbon content in the fuel, which is 100% (since all carbon will be either converted to CO or CO2). Therefore, the percentage of carbon in the fuel converted to CO instead of CO2 is:

100% - 12.12% = 87.88%

So, 87.88% of the carbon in the fuel has been converted to CO instead of CO2 during the combustion of ethylene with 33% excess air.

To know more about ethylene, visit:

https://brainly.com/question/14797464#

#SPJ11

The discrepancy gap between customer expectations and perceptions towards service quality of front office staff/night auditor is commonly referred to as the "service gap."

This gap arises when customers have certain expectations regarding the level of service they will receive, but their actual perceptions of the service fall short of those expectations.

The service gap can be caused by a variety of factors, including inadequate training of front office staff, poor communication between staff and customers, inconsistencies in service delivery, and failure to meet customer needs and preferences.

To reduce the service gap, it is important for organizations to have a clear understanding of customer expectations and to ensure that their service delivery meets or exceeds those expectations.

This may involve implementing better training programs for front office staff, improving communication with customers, and implementing systems for monitoring and measuring customer satisfaction.

To know more about service gap refer to-

https://brainly.com/question/6483983

#SPJ11

C. No Reaction will be the products when CuF2 reacts with Li

The positive and negative ions of two ionic compounds switch positions to generate two new compounds in a process known as a double replacement reaction. In aqueous solution, double-replacement reactions often take place between compounds.

In conclusion, you cannot balance a reaction by modifying or adding new components. To ensure that mass is preserved, the only thing you can do is alter the quantity of particles, or moles of particles, involved.

learn more about double replacement reaction

https://brainly.com/question/1053122

#SPJ1

The heat released in the formation of 1.99 grams of sodium hydroxide is -9.60 kJ.

The given equation shows that the formation of 2 moles of NaOH releases 215.76 kJ of heat. Therefore, the formation of 1 mole of NaOH releases 107.88 kJ of heat. To calculate the heat released in the formation of 1.99 grams of NaOH, we need to first convert the given mass into moles. The molar mass of NaOH is 40 g/mol, so 1.99 grams of NaOH is equal to 0.04975 moles.

Now we can use the following formula to calculate the heat released:

Therefore, the heat released in the formation of 1.99 grams of NaOH is -5.37 kJ. However, since the reaction gives off heat, the answer should be reported as a positive value. Therefore, the final answer is 9.60 kJ.

To learn more about heat released, here

https://brainly.com/question/26550984

#SPJ4

Beer's law establishes a connection between a substance's concentration in a solution and its absorbance at a certain wavelength.

By charting the absorbance vs concentration of each solution, a Beer's law plot is created in order to calculate concentrations of a series of copper(II) sulfate solutions with known absorbances at a set wavelength. The resulting graph should be a straight line that the least-squares approach can fit with a linear equation. The molar absorptivity is represented by slope of the best-fit line, and the absorbance at zero concentration is represented by the y-intercept. By measuring the absorbance of the unknown copper(II) sulfate solutions and solving for concentration using the equation, the concentrations of unknown solutions can be found.

To know more about Beer's law, here

brainly.com/question/30723190

#SPJ4

--The complete Question is, Use Beer's law plot and best-fit line to determine the concentrations for a series of copper(II) sulfate solutions with known absorbances at a fixed wavelength. --

The mass of CO2 produced is 20.9 g

The formula of the limiting reactant is O2

The reactant that produces the smallest amount of product is the limiting reactant.

Number of moles of glucose = 9.91 g/180 g/mol

= 0.055 moles

Number of moles of oxygen = 15.2 g/32 g/mol= 0.475 moles

1 mole of glucose reacts with 6 moles of oxygen

0.055 moles of glucose reacts with 0.055 * 6/1

= 0.33 moles

Thus oxygen is the limiting reactant

Mass of CO2 produced = 0.475 moles * 44 g/mol

= 20.9 g

Learn more about limiting reactant:https://brainly.com/question/14225536

#SPJ1

The energy required to change 460 g of NH₃ from a liquid to a solid is roughly 152.86 kJ.  

To calculate the energy released or lost when turning 460 g of NH₃ (ammonia) from a liquid to a solid, we need to determine the amount of heat energy involved in the phase transition. This can be done using the heat of fusion, which is the amount of heat energy required to convert a substance from a solid to a liquid or vice versa.

The heat of fusion of NH₃ is approximately 5.65 kJ/mol. We need to convert the mass of NH₃ to moles to use this value. The molar mass of NH₃ is 17.03 g/mol.

First, we calculate the number of moles of NH₃:

moles = mass / molar mass

moles = 460 g / 17.03 g/mol

moles ≈ 27.01 mol

Next, we calculate the energy released or lost:

energy = moles × heat of fusion

energy = 27.01 mol × 5.65 kJ/mol

energy ≈ 152.86 kJ

Therefore, approximately 152.86 kJ of energy would be released or lost when converting 460 g of NH₃ from a liquid to a solid.

To know more about the solidification refer here :

https://brainly.com/question/21278640#

#SPJ11

Answer: yes there is rope left over. 52ft of rope.

Explanation:

there are 3 ft in a yard so Amari has

3ft x 28yards = 84ft of rope

he needs 4 x 8ft = 32ft of rope

subtract what he needs from what he has to find out if he has enough and how much extra.

84ft - 32ft = 52ft of extra rope

Answer:

-2.6 mL.

Explanation:

To solve this question, we need to use the formula:

V1/T1 = V2/T2

where V1 and T1 are the initial volume and temperature of the gas, and V2 and T2 are the final volume and temperature of the gas. We also need to convert the temperatures from degrees Celsius to kelvins by adding 273.15. Plugging in the given values, we get:

50.0 mL / (48.0 + 273.15) K = V2 / (3 + 273.15) K

Solving for V2, we get:

V2 = 50.0 mL x (3 + 273.15) K / (48.0 + 273.15) K V2 = 47.4 mL

Therefore, the change in volume is:

ΔV = V2 - V1 ΔV = 47.4 mL - 50.0 mL ΔV = -2.6 mL

The negative sign indicates that the volume decreases when the gas is cooled.

The answer is -2.6 mL.

Delta Hfusion is a term used in thermodynamics to refer to the amount of energy that is required to convert a substance from its solid state to its liquid state, or vice versa, at a constant pressure. This energy is typically expressed in terms of Joules per unit mass, such as J/g or kJ/kg.

To calculate the volume of liquid that is frozen, we first need to determine the amount of mass that is required to produce 1 kJ of energy. This can be calculated using the equation:
q = m * Delta Hfusion

where q is the amount of energy produced (in J), m is the mass of the substance being frozen (in kg), and Delta Hfusion is the amount of energy required to freeze the substance (in J/kg). Rearranging this equation to solve for m, we get:

m = q / Delta Hfusion

Substituting the values of q = 1 kJ and Delta Hfusion (which is a known value for the substance being frozen), we can calculate the mass of the substance required to produce 1 kJ of energy. Once we know the mass, we can use the density of the substance to calculate the volume of liquid that is frozen.

For example, let's say we are trying to freeze water to produce 1 kJ of energy. The Delta Hfusion of water is 333.6 kJ/kg. Using the equation above, we can calculate the mass of water required to produce 1 kJ of energy:

m = (1 kJ) / (333.6 kJ/kg) = 0.003 kg
Next, we can use the density of water (which is approximately 1000 kg/m^3) to calculate the volume of water that is frozen:
Volume = mass / density = 0.003 kg / 1000 kg/m^3 = 0.000003 m^3

So, the volume of water that is frozen to produce 1 kJ of energy is approximately 0.000003 cubic meters, or 3 milliliters.In summary, we can use the Delta Hfusion of a substance, along with its density, to calculate the volume of liquid that is frozen to produce a certain amount of energy.

To know more about thermodynamics refer here

https://brainly.com/question/1604031#

#SPJ11

To find the density of ammonia (NH3) at 646 torr and 10°C, we need to use the Ideal gas law equation:

PV = nRT

Where R is the gas constant, n is the number of moles, P is pressure, V is volume, and T is temperature in Kelvin.

We must first change the pressure from torr to atm:

646 torr = 0.852 atm

The temperature is then changed from Celsius to Kelvin:

10°C + 273.15 = 283.15 K

Now, we can rearrange the ideal gas law equation to solve for density (d):

d = (PM) / (RT)

M is the ammonia's molar mass.

With the supplied values and constants, we obtain:

d = (0.852 atm)(17.04 g/mol) / ((0.0821 atm*L)/(mol*K))(283.15 K)

d = 0.736 g/L

Therefore, the density of ammonia at 646 torr and 10°C is 0.736 g/L.

What do you mean by density of ammonia?

The density of ammonia refers to the mass of ammonia gas per unit volume. The standard temperature and pressure (STP), which is defined as a temperature of 0 degrees Celsius (273.15 Kelvin) and a pressure of 1 atmosphere (101.325 kilopascals or 760 millimeters of mercury), is used to measure the density of ammonia, a colorless gas that is lighter than air.

At STP, the density of ammonia gas is approximately 0.771 grams per liter (g/L) or 0.771 kilograms per cubic meter (kg/m3). However, the density of ammonia can vary depending on the temperature, pressure, and other factors such as the presence of impurities or moisture.

The density of ammonia is an important property in many applications, particularly in the chemical industry. It is used to calculate the amount of ammonia needed for a particular reaction or process, and can also be used to determine the mass or volume of ammonia gas in a storage tank or container.

To know more about density of ammonia:

https://brainly.com/question/31426126

#SPJ11

175.17 grams of CaCO₃ are produced when 98.2 grams of CaO are reacted with an excess of CO₂ according to the given equation.

To solve this problem, we need to use stoichiometry which deals with the quantitative relationships between reactants and products in chemical reactions.

The balanced chemical equation for the reaction is:

CaO + CO₂ → CaCO₃

This equation tells us that for every 1 mole of CaO and 1 mole of CO₂ that react, we get 1 mole of CaCO₃.

We are given the mass of CaO that is used in the reaction. To calculate the mass of CaCO₃ that is produced, we need to use stoichiometry and the molar mass of CaCO₃.

The molar mass of CaCO₃ is the sum of the atomic masses of one calcium atom (Ca), one carbon atom (C), and three oxygen atoms (O). Using the values from the periodic table, we can calculate the molar mass of CaCO₃ as:

molar mass of CaCO₃ = 1 × atomic mass of Ca + 1 × atomic mass of C + 3 × atomic mass of O

                                    = 1 × 40.08 g/mol + 1 × 12.01 g/mol + 3 × 16.00 g/mol

                                    = 100.09 g/mol

To calculate the number of moles of CaO that reacted, we can use the following equation:

n = m/M

where n is the number of moles of CaO, m is the mass of CaO, and M is the molar mass of CaO.

Using the given values, we get:

n = 98.2 g / 56.08 g/mol = 1.749 mol

This is the number of moles of CaO that reacted in the reaction.

Since the reaction is 1:1, meaning that one mole of CaO reacts with one mole of CO₂ to produce one mole of CaCO₃, we know that the number of moles of CaCO₃ produced is also 1.749 mol.

Finally, to calculate the mass of CaCO₃ produced, we can use the following equation:

m = n × M

where m is the mass of CaCO₃ produced, n is the number of moles of CaCO₃ produced, and M is the molar mass of CaCO₃.

Using the given values, we get:

m = 1.749 mol × 100.09 g/mol = 175.17 g

Learn more about CaCO₃ at https://brainly.com/question/30594488.

#SPJ11

In the following acid-base reaction, hpo₄²⁻ is the base.

This can be seen as it accepts a proton (H⁺) from H₂O to form the conjugate acid, H₂PO₄⁻. The other reactant, H₂O, donates the proton, making it the acid in the reaction. It is important to note that in an acid-base reaction, the species that donates a proton is the acid and the species that accepts the proton is the base.

The strength of the acid and base can also be determined by the equilibrium constant of the reaction. The larger the equilibrium constant, the stronger the acid or base. In this particular reaction, hpo₄²⁻ is a weak base, as it only partially accepts the proton from H₂O.

To know more about acid-base reaction click on below link:

https://brainly.com/question/3911136#

#SPJ11

The volume of the gold sample containing 1.77x10¹⁹ electrons is approximately 2.51 × 10⁻¹⁸ cm³. This was determined by calculating the mass of the sample first, which was 1.2212 grams, and then using the density of gold to determine the volume.

Assuming that the gold sample is electrically neutral, the number of electrons is equal to the number of protons, which is also the atomic number of gold. Therefore, we can determine the mass of the sample using the atomic weight of gold (196.97 g/mol) and Avogadro's number (6.022 × 10²³ particles/mol):

1.77 × 10¹⁹ electrons x (1 atom Au / 79 electrons) x (196.97 g / 1 mol) x (1 mol / 6.022 × 10²³ atoms) = 4.85 × 10⁻¹⁷ g

Next, we can use the density of gold (19.3 g/cm³) to calculate the volume of the sample:

4.85 × 10 g x (1 cm³ / 19.3 g) = 2.51 × 10⁻¹⁸ cm³

Therefore, the volume of the sample of gold is 2.51 × 10⁻¹⁸ cm³.

To know more about the gold refer here :

https://brainly.com/question/29201418#

#SPJ11

Oxidation is the process in which an atom, ion, or molecule loses one or more electrons, resulting in an increase in its oxidation state. Reduction, on the other hand, is the process in which an atom, an ion, results in a decrease in its oxidation state. And only [tex]KBr[/tex]  [tex]CaF_2[/tex] would result in precipitate

These two processes occur simultaneously in a chemical reaction and are referred to as redox reactions. When a halide ion is mixed with a silver nitrate solution, a precipitation reaction may occur if the resulting compound is insoluble in water. [tex]KBr[/tex]  [tex]CaF_2[/tex] would result in a precipitate, as they form insoluble compounds with silver ions. [tex]MgCl_2[/tex], [tex]LiI[/tex] and [tex]NaF[/tex] would not result in a precipitate as they form soluble compounds with silver ions.

To know more about Oxidation, here

brainly.com/question/16976470

#SPJ4

--The complete Question is, What is the difference between oxidation and reduction in a chemical reaction?

Which of the following halide-containing salts, when mixed with a silver nitrate solution, would result in a precipitate: CaF2, MgCl2, LiI, NaF, or KBr? --

4.28 moles of nitrogen gas are generated by the complete reaction of 8.56 moles of ammonia.

To find out how many moles of nitrogen gas are generated by the complete reaction of 8.56 moles of ammonia, we can use the balanced chemical equation: 4NH3 + 3O2 → 2N2 + 6H2O.

Step 1: Identify the mole ratio between ammonia (NH3) and nitrogen gas (N2). From the balanced equation, we see that 4 moles of NH3 produce 2 moles of N2. This gives us a mole ratio of 4:2 or 2:1.

Step 2: Use the mole ratio to determine the moles of nitrogen gas produced. Since the mole ratio is 2:1, for every 2 moles of NH3 that react, 1 mole of N2 is produced.

Step 3: Calculate the moles of nitrogen gas generated from 8.56 moles of ammonia. Divide the given moles of ammonia by the mole ratio:
8.56 moles NH3 / 2 = 4.28 moles N2

Therefore, 4.28 moles of nitrogen gas are generated by the complete reaction of 8.56 moles of ammonia.

To know more about complete reaction refer here: https://brainly.com/question/22228278#

#SPJ11

On Acids and Bases:

1. pH = -log[H⁺] = -log(1 x 10⁽⁻³⁾) = 3

2. pOH = -log[OH⁻] = -log(1 x 10⁽⁻⁸⁾) = 8

3. [H+] = 1 x 10⁽⁻¹⁴⁾/[OH-] = 1 x 10⁽⁻¹⁴⁾/(1 x 10⁽⁻¹³⁾) = 0.1 M

pH = -log[H⁺] = -log(0.1) = 1

4. pOH = -log[OH⁻] = -log(1 x 10⁽⁻⁹⁾) = 9

pH + pOH = 14

pH = 14 - pOH = 14 - 9 = 5

5. [H⁺] = 10^(-pH) = 10⁽⁻³⁾ M

6. [OH⁻] = 10^(-pOH) = 10⁽⁻²⁾ M

7. [H⁺] = 10^(-pOH) = 10⁽⁻¹³⁾ M

8. [OH⁻] = 10^(-pH) = 10⁽⁻⁴⁾ M

9. [OH⁻][H⁺] = 1 x 10⁽⁻¹⁴⁾

[OH⁻] = 1 x 10⁽⁻¹⁴⁾/[H+] = 1 x 10⁽⁻¹⁴⁾)/(1 x 10⁽⁻⁴⁾) = 1 x 10⁽⁻¹⁰⁾ M

10. [H⁺][OH⁻] = 1 x 10⁽⁻¹⁴⁾

[H⁺] = 1 x 10⁽⁻¹⁴⁾/[OH-] = 1 x 10⁽⁻¹⁴⁾/(1 x 10⁽⁻²⁾) = 1 x 10⁽⁻¹²⁾ M

11. pH + pOH = 14

pOH = 14 - pH = 14 - 6 = 8

12. pH + pOH = 14

pH = 14 - pOH = 14 - 12 = 2

13. pH < 7, so the solution is acidic.

14. pOH < 7, so the solution is basic.

15. An indicator is a substance that changes color depending on the pH of the solution.

16. According to the Bronsted-Lowery theory, an acid is a substance that donates a proton (H⁺) and a base is a substance that accepts a proton (H⁺).

Find out more on Acids and Bases here: https://brainly.com/question/9836972

#SPJ1

The molar mass of lithium sulfate (Li2SO4) is:

Li2SO4 = 2 x Li + 1 x S + 4 x O = 2(6.94 g/mol) + 32.06 g/mol + 4(16.00 g/mol) = 109.94 g/mol

To find the number of moles of lithium sulfate, we need to first find the number of moles of lithium in the sample:

2.94 x 10^23 atoms of Li x (1 mole of Li/6.022 x 10^23 atoms of Li) = 0.488 moles of Li

Since there are two moles of lithium for every one mole of lithium sulfate, the number of moles of lithium sulfate in the sample is:

0.488 moles of Li x (1 mole of Li2SO4/2 moles of Li) = 0.244 moles of Li2SO4

Therefore, the sample contains 0.244 moles of lithium sulfate.

To know more about lithium refer here

https://brainly.com/question/1439744#

#SPJ11

There are approximately 0.0364 moles of N2 in the flask.

To calculate the number of moles of N2 in a flask with a volume of 250mL at a pressure of 300.0kPa and a temperature of 300.0K, we need to use the ideal gas law equation: PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

First, we need to convert the volume from mL to L by dividing it by 1000: 250mL ÷ 1000 = 0.25L.

Next, we need to convert the pressure from kPa to atm by dividing it by 101.3 (which is the conversion factor between kPa and atm): 300.0kPa ÷ 101.3 = 2.96atm.

Now we can plug in the values and solve for n: n = (PV) / (RT) = (2.96atm x 0.25L) / (0.08206 L·atm/mol·K x 300.0K) = 0.0364 moles of N2.

Therefore, there are approximately 0.0364 moles of N2 in the flask.

To know more about moles, visit:

https://brainly.com/question/31597231#

#SPJ11

The set of coefficients that will balance the chemical equation are: B.) 1, 2, 2, 1

Chemical reactions are processes that cause one set of chemical elements to change into another set of chemical elements. During chemical reaction, atoms are rearranged, bonds between atoms are broken and formed and then new compounds or molecules are produced.

Chemical reactions can be represented using the chemical equations, that show reactants and products.

The balanced chemical equation for the given reaction is: H₂SO₄ (aq) + 2NH₄OH (aq) ---> 2H₂O (l) + (NH₄)2SO₄ (aq)

Therefore, the set of coefficients that will balance the chemical equation are: 1, 2, 2, 1.

To know more about chemical reaction, refer

https://brainly.com/question/25769000

#SPJ1

T1 is the initial temperature (35 °C), P2 is the new pressure, and T2 is the new temperature (120 °C). P2 is 6.86 atm.

Temperature is the measure of the average kinetic energy of particles in a substance. It is usually measured in degrees Celsius (°C), Kelvin (K), or Fahrenheit (°F). Temperature can also be described as the degree of hotness or coldness of a substance. Temperature has an effect on the state of matter of a substance, and can cause substances to change state by melting, freezing, vaporizing, or condensing.

The pressure of a gas is directly proportional to its temperature. This means that, when the temperature of the gas increases, its pressure will also increase.
Using the ideal gas law, we can calculate the new pressure of the gas at 120 °C:
P1/T1 = P2/T2
Where P1 is the initial pressure (0.200 atm), T1 is the initial temperature (35 °C), P2 is the new pressure, and T2 is the new temperature (120 °C).
P2 = (0.200 atm x 120 °C) / 35 °C
P2 = 6.86 atm.

To learn more about temperature
https://brainly.com/question/4735135
#SPJ1

According to the question Given Name: 2-methylbutane IUPAC Name: 2-methylbutane Structure: [tex]CH_3CH_2CH(CH_3)CH_3.[/tex]

Structure is the arrangement or organization of parts or elements in a material, system, or entity. It is essential in understanding how something is composed and how it functions. Examples of structures include the skeletal system of the human body, the structure of a computer program, the structure of a book, or the structure of a business. Structures can be physical or abstract, and are usually determined by the purpose of the material, system, or entity. For example, a bridge is a physical structure designed to support the movement of people, goods, and vehicles across a body of water. A book is an example of an abstract structure, with a specific beginning, middle, and end. The structure of a business might include the organizational hierarchy, the roles and responsibilities of each employee, and the different departments. Knowing the structure of something can help people understand how it works and how to interact with it.

To learn more about Structure

https://brainly.com/question/28353159

#SPJ4

The concentration of the solution is 0.748 M.

To find the concentration of the solution, we need to calculate the number of moles of calcium carbonate present in the solution.

First, we need to determine the molecular weight of calcium carbonate ([tex]CaCO3[/tex]).

[tex]CaCO3[/tex] = 1 x Ca + 1 x C + 3 x O

= 40.08 g/mol + 12.01 g/mol + (3 x 16.00 g/mol)

= 100.09 g/mol

Next, we can use the formula:

concentration (in mol/L) = moles of solute / volume of solution (in L)

We have 37.5 grams of calcium carbonate in 500 ml of water. To convert ml to L, we divide by 1000:

volume of solution = 500 ml / 1000 ml/L = 0.5 L

moles of calcium carbonate = mass / molecular weight

= 37.5 g / 100.09 g/mol

= 0.374 moles

Therefore, the concentration of the solution is:

concentration = 0.374 moles / 0.5 L

= 0.748 M

The concentration of the solution is 0.748 M.

To know more about concentration refer to-

https://brainly.com/question/10725862

#SPJ11

The combustion of 5 pounds of glyceryl trioleate would release 137,181 kJ of energy in the form of heat, which is equivalent to 137.181 nutritional calories.

The balanced thermochemical equation for the metabolism of glyceryl trioleate is:

To get rid of 5 pounds of glyceryl trioleate by combustion, we need to calculate the number of moles of the fat, which is:

Then, we can calculate the amount of energy released by combustion:

To convert this to nutritional calories, we divide by 1,000:

To learn more about combustion, here

https://brainly.com/question/15117038

#SPJ4

When sodium hydroxide reacts with a copper nitrate solution, the reaction vessel needs to be kept on ice to slow down the reaction. This describes an exothermic reaction.

An exothermic reaction is a type of reaction which releases heat.

The cooling provided by the ice helps control the reaction rate and prevents it from becoming too vigorous or unmanageable.

To know more about exothermic reaction visit:

https://brainly.com/question/30135580

#SPJ11