A 600 −Ω and a 2800 −Ω resistor are connected in series with a 12-V battery.
What is the voltage across the 2800 −Ω resistor?

The difference in tone color between a flute and an oboe when they alternately play A4 (440 Hz) tones, the difference can be observed by comparing the timbre of their sounds.

Timbre refers to the unique quality or character of a sound, which is influenced by the instrument's construction and the manner in which it produces sound. Tone color is another term for timbre, and it helps us differentiate between the sounds of various instruments even when they are playing the same pitch and at the same volume.

for more information on sound : https://brainly.com/question/29707602

#SPJ11

Answer:

The answer is 0.8kg

Explanation:

Total mass =9kg

mass of object 1=4.5kg

mass of object 2=3.7kg

Tm=m1+m2+x

9=4.5+3.7+x

9=8.2+x

x=9-8.2

x=0.8kg

The maximum resistance you can obtain by combining 570 −Ω , a 950 −Ω , and a 1.2 −kΩ  resistors is 2,720Ω.

To find the maximum resistance you can obtain by combining a 570Ω, a 950Ω, and a 1.2kΩ resistor, you should connect them in series. In a series connection, the total resistance is the sum of the individual resistances. Here's a step-by-step explanation:

1. Convert the 1.2kΩ resistor to Ω: 1.2kΩ = 1,200Ω
2. Connect the resistors in series: R_total = R1 + R2 + R3
3. Add the resistance values: R_total = 570Ω + 950Ω + 1,200Ω
4. Calculate the total resistance: R_total = 2,720Ω

The maximum resistance you can obtain by combining these resistors is 2,720Ω.

To learn more about resistance https://brainly.com/question/30924984

#SPJ11

The time rate of change of the current in the wire is 1.7 × 10[tex]^(-7)[/tex] A/s.

The emf induced in a loop is given by the equation:

emf =[tex]-N(dΦ/dt)[/tex]

where N is the number of turns in the loop, and Φ is the magnetic flux through the loop.

In this case, the loop has a single turn, so N = 1. The magnetic flux through the loop is proportional to the magnetic field passing through it. The magnetic field at a distance r from a long, straight wire carrying current I is given by:

B =[tex]μ0I/(2πr)[/tex]

where μ0 is the permeability of free space.

The magnetic flux through the loop is then:

Φ = BAb

where A is the area of the loop and b is the component of the magnetic field perpendicular to the loop.

In this case, the loop has dimensions of 0.2 m × 0.3 m, so A = 0.06 m[tex]^2.[/tex]

The component of the magnetic field perpendicular to the loop is the same everywhere on the loop, and is given by:

b = (0.5 m)/(0.5 m + 0.15 m) = 0.77

Substituting the values, we get:

Φ = [tex](μ0I/(2π(0.5 m)[/tex])) × (0.06 m[tex]^2[/tex] ) × 0.77 = 0.0118μ0I

At the instant when the emf induced in the loop is 2.0 V, the time rate of change of the current in the wire is:

(dI/dt) =  -1.7 × 10[tex]^(-7)[/tex]A/s

learn more about induced here:

https://brainly.com/question/17329842

#SPJ4

The cylinder displaces 0.0007407 cubic meters of water.

The volume of water displaced by a submerged object is equal to the volume of the object.

The volume of the aluminum cylinder can be calculated using its density and mass:

Since the volume of water displaced by the cylinder is equal to the volume of the cylinder, we can conclude that the cylinder displaces 0.0007407 cubic meters (or 740.7 milliliters) of water.

Learn more about volume of water

brainly.com/question/17322215

#SPJ11

The angular velocity of the bike tire is 50 radians per second.

To find the angular velocity of the bike tire, we can use the formula:
ω = v / r
where ω is the angular velocity, v is the linear velocity, and r is the radius of the tire.
In this case, we are given the diameter of the tire, which is 0.800m. To find the radius, we need to divide the diameter by 2:
r = 0.800m / 2

r = 0.400m
We are also given the linear velocity of the bike, which is 20.0m/s. Plugging these values into the formula, we get:
ω = 20.0m/s / 0.400m

ω = 50.0 rad/s

Therefore, the angular velocity of the bike tire is 50.0 rad/s.

Learn more about  angular velocity at https://brainly.com/question/29342095

#SPJ11

Frequency-dependent wave summation and motor unit recruitment are both processes by which an increase in a stimulus can lead to an increase in muscle contraction.

Stimulus is a term used to describe any kind of external influence that can cause a change in behavior or thought. It is a broad term that can refer to a range of different events or stimuli, from physical objects to psychological stimuli. Stimulus can be either positive or negative, and can either cause an increase or decrease in behavior.

Frequency-dependent wave summation and motor unit recruitment are both processes by which an increase in a stimulus can lead to an increase in muscle contraction.

Frequency-dependent wave summation was achieved in the experiment by applying repetitive electrical stimulation to a muscle at increasing frequencies. The stimulation would cause a wave of depolarization to run through the muscle, resulting in a contraction. As the frequency of the stimulation increased, the strength of the contraction increased due to the summation of the waves.

Motor unit recruitment was achieved in the experiment by increasing the voltage of the stimulation. This would cause a stronger depolarization of the muscle and result in a stronger contraction. As the voltage of the stimulation was increased, the number of motor units recruited to contract the muscle would also increase.

In vivo, frequency-dependent wave summation is achieved by the nervous system sending signals to the muscle at increasing frequencies. This causes a wave of depolarization to run through the muscle, resulting in a stronger contraction.

In vivo, motor unit recruitment is achieved by the nervous system sending signals to the muscle at increasing voltage. This causes a stronger depolarization of the muscle, resulting in a stronger contraction. As the voltage of the signal increases, the number of motor units recruited to contract the muscle also increases.

To learn more about stimulus

https://brainly.com/question/1322236

#SPJ1

When a negatively charged rod is brought close to an uncharged electroscope and one's finger touches the far side of the metal ball on the electroscope, the electroscope becomes positively charged.

Here's the step-by-step explanation:

1. A negatively charged rod is brought close to the metal ball of the uncharged electroscope. This induces a charge separation in the electroscope due to the influence of the rod's electric field. The electrons in the electroscope are repelled by the negatively charged rod, leaving the metal ball with a net positive charge.

2. While the negatively charged rod is still close to the electroscope, one's finger touches the far side of the metal ball. This provides a grounding path for the excess electrons in the electroscope to move through, leaving the electroscope with a net positive charge.

3. After the charged rod has been removed, the electric field influence of the rod is no longer present. However, the electroscope remains positively charged as the excess electrons have already left through the grounding path.

4. Finally, the finger is removed, leaving the electroscope in a positively charged state.

In conclusion, after following these steps, the electroscope is left positively charged.

To know more about electroscope refer here:

https://brainly.com/question/31030885#

#SPJ11

The pair of objects on the left feel a much greater force than the pair on the right because the charges on the left are of opposite polarity, while the charges on the right are of the same polarity.

Polarity is a measure of the direction of a magnetic field or electric field. It is a fundamental property of the universe and is found in many physical phenomena, including the behavior of charged particles and the electromagnetic force. In a magnetic field, the direction of the field lines is referred to as the polarity of the field. In an electric field, it is the direction of the electric field vector that determines the polarity. In both cases, a positive polarity indicates a field pointing away from the source, while a negative polarity indicates a field pointing toward the source.

To learn more about polarity

https://brainly.com/question/16979824

#SPJ1

The negative sign indicates that the angular acceleration is in the opposite direction to the initial angular velocity (i.e., it is slowing down).

We can use the following formula to calculate angular acceleration:

α = (ωf - ωi) / t

where

ωi = initial angular velocity

ωf = final angular velocity

t = time interval

Here, the initial angular velocity ωi = 45.0 rad/s and the final angular velocity ωf = 10.0 rad/s, and the time interval t = 1.75 s.

Plugging in these values, we get:

α = (10.0 rad/s - 45.0 rad/s) / 1.75 s

α = -25.7 rad/s^2

The negative sign indicates that the angular acceleration is in the opposite direction to the initial angular velocity (i.e., it is slowing down).

To learn more about opposite visit:

https://brainly.com/question/29407794

#SPJ11

The nucleus n,mX is 17,8X. Based on the atomic number (m = 8), the element is oxygen. Therefore, the nucleus is 17,8O (oxygen-17). The nuclear reaction is 14,7N + 4,2He = 17,8O + 1,1H.

In the given nuclear reaction:
14,7N (nitrogen-14) + 4,2He (helium-4) = n,mX + 1,1H (hydrogen-1)

First, let's analyze the conservation of mass and atomic numbers in the nuclear reaction. To do this, we add the mass numbers (the top numbers) and the atomic numbers (the bottom numbers) on each side of the equation.

Mass numbers:
14 (N) + 4 (He) = n (X) + 1 (H)
18 = n + 1

Atomic numbers:
7 (N) + 2 (He) = m (X) + 1 (H)
9 = m + 1

Now, we can solve for n and m:
n = 18 - 1 = 17
m = 9 - 1 = 8

Learn more about conservation of mass here:

brainly.com/question/13383562

#SPJ11

During the time that the temperature remained constant, the heat energy you were transferring was not raising the temperature because it was being used for a phase change. In other words, the heat energy was being absorbed to change the state of the substance (e.g., from solid to liquid or liquid to gas) without increasing its temperature. Once the phase change is complete, any additional heat energy transferred to the substance will cause its temperature to rise again.

Learn more about Temperature https://brainly.com/question/934320

#SPJ11

Force A has a moment arm of 20 cm and a magnitude of 5 N, and Force B has a moment arm of 5 cm and a magnitude of 20 N. The system of forces is in static equilibrium.

In order for a system to be in static equilibrium, the sum of the torques (moments) acting on the system must be equal to zero. Let's calculate the torques produced by Force A and Force B:

1. Convert the moment arms to meters:
Moment arm of Force A = 20 cm = 0.2 m
Moment arm of Force B = 5 cm = 0.05 m

2. Calculate the torque produced by each force:
Torque of Force A = Moment arm of Force A × Magnitude of Force A = 0.2 m × 5 N = 1 Nm
Torque of Force B = Moment arm of Force B × Magnitude of Force B = 0.05 m × 20 N = 1 Nm

3. Check if the system is in static equilibrium:
Since the torques produced by Force A and Force B are equal and opposite (assuming they act in opposite directions), their sum is zero:
Torque of Force A + Torque of Force B = 1 Nm - 1 Nm = 0 Nm

Thus, the system of forces is indeed in static equilibrium.

To know more about static equilibrium:

https://brainly.com/question/29316883

#SPJ11

The new period of oscillation will be 2π√(m/((n + 1)k)).

When identical springs are added in parallel to the original glider, the effective spring constant of the system increases. This is because the springs are now acting together to produce a greater force, and thus the restoring force on the glider is greater than before.

As a result, the period of the oscillation will decrease. The period of oscillation for a mass-spring system is given by:

T = 2π√(m/k)

Where T is the period, m is the mass of the glider, and k is the spring constant. Since the mass of the glider does not change when additional springs are added in parallel, the period will decrease due to the increase in the effective spring constant (k_eff).

The effective spring constant of the system with n identical springs in parallel is given by:

k_eff = (n + 1)k

Therefore, the new period of oscillation will be:

T' = 2π√(m/(k_eff))

= 2π√(m/((n + 1)k))

Since k_eff > k, T' < T, which means that the period of oscillation will decrease when identical springs are added in parallel to the original glider.

for such more question on oscillation

https://brainly.com/question/12622728

#SPJ11

If a a block of mass 10 kg is pulled to the right along a rough horizontal surface with a constant horizontal force of 20 n. the friction force is known to have a magnitude 5 n.The net force on the 10 kg block is 15 N to the right.

To find the net force on the block follow these steps:
1. Identify the forces acting on the block: The horizontal force (20 N) is acting to the right, while the friction force (5 N) is acting to the left (opposite direction).
2. Choose the positive direction: In this case, the positive direction is to the right.
3. Calculate the net force: Net force = Horizontal force - Friction force. Since the horizontal force is in the positive direction and the friction force is in the opposite direction, the calculation becomes: Net force = 20 N - 5 N = 15 N.
The net force on the 10 kg block is 15 N to the right.

To learn more about friction force https://brainly.com/question/31430180

#SPJ11

The potential energy of the system when the object displacement is 0.040 m, exactly half the maximum amplitude, is 0.024 J.

When an object is oscillating on a spring, it has both kinetic and potential energy. The potential energy of the system is stored in the spring and is a function of the displacement of the object from its equilibrium position. In this case, the object has a mass of 0.20 kg and is oscillating on a spring with a spring constant of k = 15 N/m.

To calculate the potential energy of the system when the object displacement is 0.040 m, exactly half the maximum amplitude, we first need to determine the amplitude of the oscillation. The amplitude is the maximum displacement from the equilibrium position, and in this case, it is twice the displacement of 0.040 m, or 0.080 m.

The potential energy of the system is given by the formula U = 1/2 [tex]kx^2[/tex], where k is the spring constant and x is the displacement from the equilibrium position. Plugging in the values, we get:

U = 1/2 (15 N/m) [tex](0.040 m)^2[/tex]
U = 0.024 J

For more such questions on Potential energy.

https://brainly.com/question/30147894#

#SPJ11

Slice thickness artifact commonly expresses itself as: d. strong linear echoes .

When slice thickness artifact occurs, it commonly expresses itself as strong linear echoes on the ultrasound image. This is because the ultrasound beam is not able to accurately focus on the entire thickness of the structure being imaged, resulting in multiple echoes being received from the different layers within the structure. These echoes can appear as strong, parallel lines on the image and can lead to misinterpretation of the anatomy being imaged.

Learn more about echoes here: https://brainly.com/question/16351729

#SPJ11

The average vertical component of the velocity of the gas molecules can be calculated using the kinetic theory of gases.

According to the kinetic theory of gases, the average kinetic energy of a gas molecule is directly proportional to the temperature of the gas:

KE = (1/2)mv^2 = (3/2)kT

where m is the mass of the molecule, v is the velocity of the molecule, k is the Boltzmann constant, and T is the temperature of the gas.

The pressure exerted by the gas on the top of the cube can be related to the average kinetic energy of the gas molecules:

p = (n/A) * (m/A) * v^2/3

where n/A is the number of molecules hitting the top of the cube per unit time, and (m/A) is the mass of each molecule per unit area.

Solving for v, we get:

v = sqrt(3p/m) * sqrt(A/n)

The average vertical component of the velocity can be obtained by multiplying v by the cosine of the angle between the velocity vector and the vertical axis, which is equal to 1/sqrt(3). Therefore, the average vertical component of the velocity of the gas molecules is:

vz = v * 1/sqrt(3)

vz = sqrt(3p/m) * (1/sqrt(3)) * sqrt(A/n)

vz = sqrt(p/m) * sqrt(A/n)

Hence, the average vertical component of the velocity of the gas molecules is proportional to the square root of the pressure and the area, and inversely proportional to the square root of the number of molecules hitting the top of the cube per unit time and the mass of each molecule.

Learn more about vertical component

brainly.com/question/14919796

#SPJ11

The number of turns in the solenoid is 10.08 x 10⁴.

Length of the solenoid, L = 0.5 m

Magnetic field, B = 9 T

Current flowing through the solenoid, I = 75 A

The magnetic field due to a current carrying solenoid,

B = μ₀NI/L

Therefore, the number of turns,

N = BL/μ₀I

N = (9 x 0.5)/(4[tex]\pi[/tex] x 10⁻⁷x 75)

N = 10.08 x 10⁴

To learn more about solenoid, click:

https://brainly.com/question/15504705

#SPJ4

A typical raindrop would take 500 seconds

To calculate the time it takes for a raindrop to fall to the ground, we can use the formula: time = distance / speed. The terminal velocities for different raindrop sizes are approximately:

- Large raindrop (5 mm): 9 m/s
- Typical raindrop (2 mm): 6 m/s
- Drizzle drop (0.5 mm): 2 m/s

Assuming the cloud base is at 3000 meters, we can calculate the time for each type of raindrop as follows:

Large raindrop (5 mm): time = 3000m / 9 m/s = 333.33 seconds
Typical raindrop (2 mm): time = 3000m / 6 m/s = 500 seconds
Drizzle drop (0.5 mm): time = 3000m / 2 m/s = 1500 seconds

So, a large raindrop would take about 333.33 seconds to reach the ground,A normal raindrop takes 500 seconds to form., and a drizzle drop would take 1500 seconds to fall from the cloud base at 3000 meters to the ground when the air is still.

Learn more about terminal velocities.

brainly.com/question/2654450

#SPJ11

Means that the wheel's rotational speed will decrease as it slows down due to the braking force.

When you apply the brakes to a rotating bicycle wheel, friction is created between the brake pads and the wheel rim. This frictional force acts in the opposite direction to the direction of the wheel's motion, which in this case is clockwise when viewed from your perspective.

According to Newton's Second Law, the angular acceleration (α) of a rotating object is directly proportional to the net torque (τ) acting on the object and inversely proportional to its moment of inertia (I). The direction of the angular acceleration is in the same direction as the net torque.

In this case, the net torque acting on the wheel is in the counterclockwise direction, which is opposite to the clockwise direction of the wheel's motion. Therefore, the direction of the angular acceleration is also counterclockwise. This means that the wheel's rotational speed will decrease as it slows down due to the braking force.

To learn more about acceleration visit:

https://brainly.com/question/12550364

#SPJ11

The mass of the object that the star is orbiting around the galactic center is approximately 2.13 × 10^12 kg.

To calculate the mass of the object that the star is orbiting around the galactic center, we can use the following formula derived from Newton's law of gravitation and centripetal force:

M = (v^2 * R) / G

where M is the mass of the object, v is the orbital speed of the star (1400 km/s), R is the orbital radius (20 light-days), and G is the gravitational constant (approx. 6.674 × 10^-20 km^3/kg s^2).

First, we need to convert the orbital radius from light-days to kilometers. One light-day is approximately 25,902,068,371.2 km. Therefore, 20 light-days is equal to:

20 * 25,902,068,371.2 km = 518,041,367,424 km

Now we can substitute the values into the formula:

M = ((1400 km/s)^2 * 518,041,367,424 km) / (6.674 × 10^-20 km^3/kg s^2)
M ≈ 2.13 × 10^12 kg

So the mass of the object that the star is orbiting around the galactic center is approximately 2.13 × 10^12 kg.

To know more about star orbiting click here:

https://brainly.com/question/14545297

#SPJ11

The ratio of the potential energy of Satellite B to Satellite A is 2/3. This means that Satellite B has about 67% of the potential energy of Satellite A.

To calculate the ratio of the potential energy of Satellite B to Satellite A, we need to use the formula for gravitational potential energy:

U = [tex]- G (m_1m_2)/r[/tex]

where U is the gravitational potential energy, G is the gravitational constant ([tex]6.67 \times 10^{-11}\: Nm^2/kg^2[/tex]), [tex]m_1[/tex] and [tex]m_2[/tex] are the masses of the two satellites, and r is the distance between them.

Since both satellites have the same mass, we can simplify the formula to:

U = [tex]- G m^2 / r[/tex]

where m is the mass of each satellite.

The distance between the center of Earth and Satellite A is RE, so the distance between Satellite A and Earth's center is (RE + RE) = 2RE. Similarly, the distance between the center of Earth and Satellite B is (2RE + RE) = 3RE.

So, the ratio of the potential energy of Satellite B to Satellite A is:

[tex]U_B / U_A = (- G m^2 / 3RE) / (- G m^2 / 2RE)[/tex]

Simplifying this expression, we get:

[tex]U_B / U_A = 2/3[/tex]

For similar question on potential energy

https://brainly.com/question/1242059

#SPJ11

At the equilibrium position, the acceleration of the block is zero, and therefore, the velocity is at its maximum value. The correct answer is a. in the equilibrium position.

The speed of the block decreases as it moves away from the equilibrium position and reaches zero at the rightmost or leftmost position before changing direction and starting to move back towards the equilibrium position.
In Simple Harmonic Motion (SHM), the speed of the block reaches its maximum value when the block is:
a. in the equilibrium position.
The reason for this is that when the block is at its rightmost or leftmost positions, its speed is momentarily zero before changing direction. As the block moves towards the equilibrium position, its speed increases, reaching its maximum value at the equilibrium position. From there, as the block continues moving towards the opposite extreme, its speed decreases until it reaches zero again at the rightmost or leftmost position.

Visit here to know more about Simple Harmonic Motion (SHM):

brainly.com/question/30404816

#SPJ11

Negative work simply means that the work done is in the opposite direction to the force applied, regardless of the direction of the force.

False. Negative work does not necessarily mean that work is being done in the negative direction.

Work is defined as the product of force and displacement, with the direction of the force and displacement determining the sign of the work. If the force and displacement are in the same direction, then the work done is positive. If the force and displacement are in opposite directions, then the work done is negative.

However, the sign of the work does not necessarily correspond to a direction. For example, if a force is applied to an object in the upward direction, but the object moves downward, the work done by the force is negative, even though the force was applied in the positive direction. Similarly, if a force is applied in the negative direction, but the object moves in the positive direction, the work done by the force is positive.

Therefore, negative work simply means that the work done is in the opposite direction to the force applied, regardless of the direction of the force.

To learn more about opposite visit:

https://brainly.com/question/29407794

#SPJ11

The new force between two objects of mass M and 2M is measured to be F when the two are placed a distance R from each other and the distance is increased to 2R would be one-fourth of the original force, or F/4.

The new gravitational force between two objects of mass M and 2M when the distance is increased from R to 2R can be calculated using the formula:

F_new = (G × M × 2M) / (2R)²

Where F_new is the new force, G is the gravitational constant, M is the mass of the first object, 2M is the mass of the second object, and 2R is the new distance between them.

Since the initial force F = (G × M × 2M) / R², we can substitute this into the equation:

F_new = F / 2²

F_new = F / 4

So, when the distance between the objects is increased to 2R, the new gravitational force between them will be one-fourth of the original force, or F/4.

Learn more about gravitational force: https://brainly.com/question/24783651

#SPJ11

The figure that best illustrates is: look for the drawing that shows an increase in the balloon's volume when the temperature is increased, while the pressure remains constant.

To determine which drawing in the figure best illustrates what happens when the temperature of a helium-filled rubber balloon is increased at constant pressure, you should consider the relationship between temperature and volume in a gas system.

When the temperature of a helium-filled rubber balloon is increased at constant pressure, the gas molecules in the balloon gain energy and move faster. This causes the gas to expand, increasing the volume of the balloon. This behavior can be explained by Charles's Law, which states that the volume of a gas is directly proportional to its temperature when the pressure is held constant.

So, search for the illustration in the picture that depicts a rise in the balloon's volume as the temperature rises while the pressure stays the same.

Learn more about "temperature": https://brainly.com/question/25677592

#SPJ11

The effect of friction on the amplitude of the pendulum does not affect the period of the pendulum, but it does affect the accuracy and speed of the pendulum.

The period of a pendulum refers to the time it takes for the pendulum to complete one swing, i.e., the time it takes for it to move from one end to the other and back again. The period of a pendulum is determined by the length of the pendulum and the force of gravity, and it is not affected by the amplitude or the mass of the pendulum.

Therefore, even though the amplitude of the pendulum gradually decreases due to friction, the period remains constant as long as the length and force of gravity do not change. This means that the time it takes for the pendulum to complete one swing remains the same regardless of the amplitude of the pendulum.

However, it is important to note that the amplitude of the pendulum does affect the maximum speed of the pendulum during each swing. As the amplitude decreases, so does the maximum speed of the pendulum, which means that the pendulum takes longer to complete each swing. Additionally, as the amplitude decreases, the pendulum becomes less accurate in keeping time, and the period may vary slightly over time.

For more such questions on Pendulum.

https://brainly.com/question/30673364#

#SPJ11

The increase in the length of the rail on a hot day when the temperature is 30 °C is 0.0363 m.

Length is a measurement of distance or size. It is one of three fundamental measurements (along with width and height) used to describe the size of an object. Length can be measured in a variety of units, such as meters, feet, inches, or centimeters. In mathematics, length is defined as the longest dimension of an object or distance between two points. In physics, length is a fundamental quantity used to measure objects and distances.

The increase in the length of the rail on a hot day when the temperature is 30 °C can be calculated using the formula for linear expansion:

ΔL = L0 * α * ΔT

Where L0 is the original length of the rail (34 m), α is the linear expansion coefficient of steel (11 x 10-6 (°C)-1), and ΔT is the change in temperature (30 °C - (-3 °C) = 33 °C).

Plugging in the values, we get:

ΔL = 34 m * 11 x 10-6 (°C)-1 * 33 °C

ΔL = 0.0363 m

Therefore, the increase in the length of the rail on a hot day when the temperature is 30 °C is 0.0363 m.

To learn more about length

https://brainly.com/question/733318

#SPJ1