Answer:
The final temperature of the mixture is 44.9°C
Explanation:
Mass of the substance (gold) = 2.575g
Specific heat capacity of gold = 0.129J/g°C
Initial temperature (T1) = 75°C
Final temperature (T2) = ?
Energy lost = 10J
Heat energy(Q) = MC∇T
Q = heat energy (in this case lost)
M = mass of the substance
C = specific heat capacity of the substance
∇T = change in temperature of the substance = (T2 - T1)
Q = MC∇T
Q = MC(T2 - T1)
-10 = 2.575 × 0.129 × (T2 - 75) energy is -ve because it was energy lost.
-10 = 0.3321 × (T2 - 75)
-10 = 0.3321T2 - 24.9075
Collect like terms
0.3321T2 = 24.9075 - 10
0.3321T2 = 14.9075
T2 = 14.9075 / 0.3321
T2 = 44.88
T2 = 44.9°C
The final temperature of the mixture is 44.9°C
What is the pH of a 6.4x10^-10 m OH- solutions
Answer:
pH: 4.80617997398
pOH: 9.19382002602
[H+]: 1.5625E-05
[OH-]: 6.4E-10
ACID
Hope it helps :)
If a gas at 35°C and 2.3 atm is heated to 50°C, then what will the new pressure be? (Gay Lussac's Law)
Remember to convert Celsius tempertature into Kelvin. (Take the Celsius values and add 273)
Answer:
THE NEW PRESSURE OF THE GAS AT 50 °C IS 2.41 atm.
Explanation:
Initial temperature = 35 °C = 35 + 273 K= 308 K
Final temperature = 50 °C =50 + 273 K = 323 K
Initial pressure = 2.3 atm
Final pressure = unknown
Using the combined gas equation to get the relationship between pressure and temperature for a given gas sample, we have;
P1 / T1 = P2 / T2
P2 = P1 T2 / T1
P2 = 2.3 * 323 / 308
P2 = 742.9 /308
P2 = 2.41 atm.
THE NEW PRESSURE IS 2.41 atm at 50 °C
example of potassium salt
Answer:
1) Sodium Chloride
2) Potassium Dichromate
3)Calcium Chloride
4)Sodium Bisulfate
Explanation:
Ex:1) Sodium chloride (NaCl) is the most common type of salt in our lives. Known as table salt, it forms a cubic lattice when it's in solid form. It's one of the safest materials you can use in a chemistry class or kitchen.
Ex:2) Potassium dichromate (K2Cr2O7) is an orange-colored salt composed of potassium, chromium and oxygen. Not only is it toxic to humans, it's also an oxidizer that is a fire hazard. Potassium dichromate should never be thrown away. Instead, it should be washed down the drain with a lot of water. Always use rubber gloves when working with this compound. If you spill a potassium dichromate solution on your skin, it gives you a chemical burn. Keep in mind that any compound with chromium in it is a potential carcinogen.
Ex:3)Calcium chloride (CaCl2) resembles table salt in its white color. It is widely used to remove ice from roads. It's more effective than sodium chloride as a deicer, because calcium chloride produces three ions, while calcium chloride produces only two. Calcium chloride can melt ice down to minus 25 F, as much as 10 degrees lower than for sodium chloride. Calcium chloride is so hygroscopic, which is the ability to absorb water, that if you leave it in a room uncovered, it can absorb enough water from the air to dissolve into a solution all on its own.
Ex:4) Sodium bisulfate (NaHSO4) forms from sodium, hydrogen, sulfur and oxygen. It is created from sulphuric acid and retains one of the acid's hydrogen ions, which gives this salt acidic qualities. Known as a dry acid, sodium bisulfate is used in commercial applications, such as reducing the pH level of spas and swimming pools, washing concrete and cleaning metals. In its solid form, sodium bisulfate forms white beads. This salt is poisonous and can damage your skin, so use rubber gloves when handling it. If ingested, call the poison control center immediately and do not induce vomiting.
Which is one way that topographic maps are different from other maps?
Answer:
The answer is A. Unlike other maps, topographic maps indicate man-made and natural landforms.
Explanation: Took the test and got 100% Edg. 2020
Answer:
A)Unlike other maps, topographic maps indicate man-made and natural landforms.
Explanation:
If two identical atoms are bonded together, what kind of molecule is formed?
A. A bent, nonpolar molecule
B. A linear, polar molecule
C. A linear, nonpolar molecule
D. A linear, ionic molecule
Answer:
C. A linear, nonpolar molecule
Explanation:
Molecules which are alike usually have the same degree of pull which results in them sharing electrons. This sharing of electrons is known as the molecules exhibiting Covalent bonding between them.
The equal pull also results in the cancelling out of electrons and favoring non polar bonds due to the absence of free electrons which would have been able to interact with H2O in a polar binding system.
Answer:
C
Explanation:
APEX
why should we store Phosphorus in water
The reason we should store phosphorous in water is because it will ignite on contact with air
What do all pure substances have in common?
Answer:
All the pure substances are made up of atoms and group of atoms known as molecules. They also have weight, volume and colour white solids also have the shape and hardness or texture. Pure substances also have points at which they boil and solidify.
Answer:
Pure substances are defined as substances that are made of only one type of atom or molecule. The purity of a substance is the measure of the extent to which a given substance is pure.
Explanation:
A compound contains 34.5% calcium, 24.1% silicon and 41.4% oxygen by mass. What is its empirical formula?
[tex]empirical \: formula \\ = CaSiO3 \\ please \: see \: the \: attached \: picture \\ hope \: it \: helps[/tex]
what happens to particles during a physical change?
Answer:
im pretty sure they heat up
Explanation:
as they use energy to go from solid to liquid to gas, they need heat to do so as they have a melting and boiling point
20 points!! Please help me! Will mark Brainliest!! complete the following word equations:) also write the balanced equation, full ionic equation, and net ionic equation. Also include the states:)
a) zinc nitrate + calcium sulphide—>
b) potassium + calcium chloride—>
boron has two naturally occurring isotopes .there are 10 b(20%)and 11b(80%).what is the average atomic mass of boron
Answer:
Explanation:
Average Atomic mass of any element =[ ∑ Abundance* mass of element] /100
= 10*20 +11*80 /100
= .........
Hope this helps you
What systems need to be in place to ensure fairness in healthcare?
Answer:
The Healthcare system should be a welcome place to the different tiers of people in the society. There should be zero form of discriminations and everyone should be should be treated in the same way. Defaulters should be frowned at and adequate punishments should be meted out. There should be strict accountability of the funds made available to the healthcare centers to prevent diversion and any corrupt practices. These systems need to be in place to ensure fairness in healthcare.
Write Fe salts (divalent Fe)?
Pleasee help.... I will mark the answer with brainlist.
Answer:
Graphitic carbon nitride (g-C3N4) is a rising two-dimensional material possessing intrinsic semiconducting property with unique geometric configuration featuring superimposed heterocyclic sp2 carbon and nitrogen network, nonplanar layer chain structure, and alternating buckling. The inherent porous structure of heptazine-based g-C3N4 features electron-rich sp2 nitrogen, which can be exploited as a stable transition metal coordination site. Multiple metal-functionalized g-C3N4 systems have been reported for versatile applications, but local coordination as well as its electronic structure variation upon incoming metal species is not well understood. Here we present detailed bond coordination of divalent iron (Fe2+) through micropore sites of graphitic carbon nitride and provide both experimental and computational evidence supporting the aforementioned proposition.
The molecular formula for pentyne is
a.c6h6
b.c5h8
c.c5h12
d.c6h14
Answer:
B
Explanation:
The molecular formula for pentyne is C5H8
This is how osmium appears in the periodic table.A purple box has O s at the center and 76 above. Below it says osmium and below that 190.23.
Rounded to the nearest whole number, how many neutrons, on average, are in an atom of osmium?
a76
b114
c 190
d266
Answer:
114
Explanation:
plz make me brainiest
If 1.50 L of 0.780 mol/L sodium sulfide is mixed with 1.00 L of a 3.31 mol/L lead(II) nitrate solution, what mass of precipitate would you expect to form?
Answer:
336.1 g of PbS precipitate
Explanation:
The equation of the reaction is given as;
Na2S(aq) + Pb(NO3)2(aq) ----> 2NaNO3(aq) + PbS(s)
Ionically;
Pb^2+(aq) + S^2-(aq) -----> PbS(s)
Number of moles of sodium sulphide= concentration of sodium sulphide × volume of sodium sulphide
Number of moles of sodium sulphide= 0.780 × 1.5 = 1.17 moles
Number of moles of lead II nitrate= concentration of lead II nitrate × volume of lead II nitrate
Number of moles of lead II nitrate= 3.31× 1.00= 3.31 moles
Then we determine the limiting reactant. The limiting reactant yields the least amount of product.
Since 1 moles of sodium sulphide yields 1 mole of lead II sulphide
1.17 moles of sodium sulphide also yields 1.17 moles of lead II sulphide
Hence sodium sulphide is the limiting reactant.
Thus mass of precipitate formed= amount of lead II sulphide × molar mass of sodium sulphide
Molar mass of lead II sulphide= 287.26 g/mol
Mass of lead II sulphide = 1.17 moles × 287.26 g/mol
Mass of lead II sulphide= 336.1 g of PbS precipitate
Why are prefixes not used in naming ionic compounds?
A. Two ions can combine in only one combination.
B. The number of ions is not fixed in a compound.
C. A roman numeral is used instead of a prefix
D. A subscript follows each name instead of a prefix.
Answer:
A.
Explanation: thats what i got right on the quiz lol
Prefixes are not used in naming ionic compounds because two ions can combine in only one combination.
It is common in organic chemistry and with a few other molecular species, to name the compound using a prefix such as di, tri, tetra etc to indicate the positions of moieties in the molecule. This is important because there could be several possible combinations of atoms in a molecule.
In the case of ionic compounds, the combining ions can only have one possible arrangement.
Hence, the reason why prefixes are not used in naming ionic compounds is because two ions can combine in only one combination.
Learn more: https://brainly.com/question/11527546
In a science experiment, 10 tomato plants were given fertilizer in their water each week and 10 tomato plants were given plain water each week. All other factors were the same for all plants. At the end of each week, the height of each plant was measured. What was the independent and dependent in the experiment?
1. the height of the plant
2. the amount of water given
3. the type of plant
4. whether or not there was fertilizer in the water
Answer:
Independent: whether or not there was fertilizer in water
Dependent: height of plants
Explanation:
In an experiment, there is an independent and a dependent variable. The independent variable is what is changed in the experiment. The dependent variable is what is measured.
In this experiment, 10 tomato plants are given fertilizer in the water, while 10 other tomato plants are given regular water. Everything else is kept constant, and the heights are measured at the end of the week.
The independent variable is what is being changed. In this experiment, the only thing being manipulated is the fertilizer. One group of the plants is given fertilizer, while the other is not. Therefore, the independent variable is whether or not there was fertilizer in the water.
The dependent variable is what is being measured. In this experiment, the thing that is being measured is the height of the plants. Therefore, the dependent variable is the height of the plants.
A.
B.
C.
D.
what’s could be the correct answer?
Pls help me with this will mark brainliest
Answer:
Pulmonary circulation moves blood between the heart and the lungs. The oxygenated blood then flows back to the heart. Systemic circulation moves blood between the heart and the rest of the body. It sends oxygenated blood out to cells and returns deoxygenated blood to the heart
Explanation:
1.)A strong acid solution requires 3.2 grams of sulfuric acid (H2SO4). How many molecules of sulfuric acid are in the solution?
2.) While measuring out the sulfuric acid you accidentally spilled some of it! Before trying to clean it up you put some baking soda (NaHCO3) on to it neutralize it. If you scatter 7.8 g of baking soda on the acid how many moles of baking soda have you used?
Answer: 1. There are [tex]0.20\times 10^{23}[/tex] molecules of sulfuric acid in the solution.
2. 0.093 moles of baking soda have been used.
Explanation:
According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
To calculate the moles, we use the equation:
1. [tex]\text{Number of moles of sulpfuric acid}=\frac{\text{Given mass}}{\text {Molar mass}}=\frac{3.2g}{98g/mol}=0.033moles[/tex]
1 mole of [tex]H_2SO_4[/tex] contains = [tex]6.023\times 10^{23}[/tex] molecules of sulfuric acid
Thus mole of [tex]H_2SO_4[/tex] contains = [tex]\frac{6.023\times 10^{23}}{1}\times 0.033=0.20\times 10^{23}[/tex] molecules of sulfuric acid
There are [tex]0.20\times 10^{23}[/tex] molecules of sulfuric acid in the solution.
2. [tex]\text{Number of moles of baking soda}=\frac{\text{Given mass}}{\text {Molar mass}}=\frac{7.8g}{84g/mol}=0.093moles[/tex]
0.093 moles of baking soda have been used.
Does the conductivity increase or decrease?
O It increases at first, then decreases.
O It continuously decreases
O It continuously increases
O lt decreases at first, then increases
Answer:
It continuously decreases.
Explanation:
the thermal motion makes the electrons to collide and disturb the free flow. Thus, conductivity is decreased.
Which elements are diatomic?
Answer:The elements hydrogen, nitrogen, oxygen, fluorine, chlorine, bromine and iodine are diatomic elements
Definition of diatomic elements:Diatomic elements are special as the atoms that form it do not like to be alone. That is, you will never find a nitrogen or fluorine atom, for example, hanging out solo. Rather, these atoms will always be paired together because they need to pool resources to have enough electrons.
Answer:
H2, O2, N2, F2, Cl2, Br2, I2
Explanation:
These occur naturally has molecules of 2 atoms.
They are all gases except Br2, liquid and iodine which is solid.
7. What volume of a 0.10 mol/l HCl solution is needed to neutralize 10 ml of a 0.15
mol/l LiOH solution (5 points)
Answer: The volume of a 0.10 mol/l HCl solution needed to neutralize 10 ml of a 0.15 mol/l LiOH solution is 15 ml
Explanation:
To calculate the volume of acid, we use the equation given by neutralization reaction:
[tex]n_1M_1V_1=n_2M_2V_2[/tex]
where,
[tex]n_1,M_1\text{ and }V_1[/tex] are the n-factor, molarity and volume of acid which is [tex]HCl[/tex]
[tex]n_2,M_2\text{ and }V_2[/tex] are the n-factor, molarity and volume of base which is LiOH.
We are given:
[tex]n_1=1\\M_1=0.10mol/L\\V_1=?mL\\n_2=1\\M_2=0.15mol/L\\V_2=10mL[/tex]
Putting values in above equation, we get:
[tex]1\times 0.10\times V_1=1\times 0.15\times 10\\\\V_1=15mL[/tex]
Thus the volume of a 0.10 mol/l HCl solution needed to neutralize 10 ml of a 0.15 mol/l LiOH solution is 15 ml
the wavelength of a light wave whose frequency 5.0x 10^9 s^-1 is
Answer:
wavelength = 6 cm .
Explanation:
frequency given = 5 x 10⁹ .
wavelength = velocity of light / frequency
= 3 x 10⁸ / 5 x 10⁹
= .06 m
= 6 cm
where are people mostly exposed to chemicals?
Answer:
people are mostly exposed to chemicals through their nose, mouth, eyes, and ears
Explanation:
they are the easiest way for anything, bad or good, to enter the body because people touch their face alot.
This might not answer what you were looking for but the other answer covered it pretty well so I thought I'd give you another angle to the question!
Hope this helps!!
Convert to standard notation.
8.127 x
10-4
Answer:
0.0008127
Explanation:
This is easy
Action and reaction forces are described by newtons what law of motion
According to Newton, whenever objects A and B interact with each other, they exert forces upon each other. ... These two forces are called action and reaction forces and are the subject of Newton's third law of motion. Formally stated, Newton's third law is: For every action, there is an equal and opposite reaction.
There are total three laws of newtons, first law of newtons, second law of newton and third law of newton. Therefore, action and reaction forces are described by newtons third law of motion.
What is newton's third law?Newton's first law is also called law of inertia. An object at rest remains at rest, and an object in motion remains in motion at constant speed and in a straight line unless acted on by an unbalanced force.
Third law states that for every action there is an equal and opposite reaction. Third law is applicable in many field of physics. The third law is applicable in the running of rockets. The third law is also used by swimmers during swimming in pool.
Therefore, action and reaction forces are described by newtons third law of motion.
To learn more about newton's law, here:
https://brainly.com/question/29768600
#SPJ6
If the temperature outside is 297 what is this temperature in degrees celsius
Answer:
147.222
Explanation:
It's a simple conversion.
Which is one way that waves erode coastlines?
Answer:
Four main processes erode the destructive waves; hydraulic action, compression, abrasion and attrition. Hydraulic Action is the sheer force of water crashing off the coastline causing the material to dislodge and be carried away by the sea.
Answer:
a
Explanation:
