Answer:
64 m/s
Explanation:
64m/s is the answer of question
64/m/s the answer
planets A & B are near each other but there is a large difference in their temperatures using the data in the table explain how the atmosphere of these two planets can influence the average temperature
Answer: Planet A is closer to the Sun and has much greater atmospheric pressure. This suggests that planet A has a thicker atmosphere. Planet A's atmosphere is also mostly made of carbon dioxide, which is a greenhouse gas. This gas retains heat, raising the surface temperature of planet A.
Explanation:
Planet A is closer to the Sun and has much greater atmospheric pressure. This suggests that planet A has a thicker atmosphere. Planet A’s atmosphere is also mostly made of carbon dioxide (CO2), which is a greenhouse gas. This gas retains heat, raising the surface temperature of planet A.
Hope this one help.
At serve, a tennis player aims to hit the ball horizontally, as shown in the figure.
(a) What minimum speed is required for the ball to clear the 0.90-m-high net about 15.0 m
from the server if the ball is “launched” from a height of 2.50 m?
(b) Where will the ball land if it just clears the net (and will it be “good” in the sense that it
lands within 7.0 m of the net)?
(d) How long will it be in the air?
(a) The minimum speed required for the ball to clear the net is 26.3 m/s.
(b) The horizontal distance of the ball when it clears the net is 11.3 m
(c) The total time spent in the air by the ball is 1 s.
Time of motion
The time of motion of the tennis ball is calculated by using the following kinematic equation as shown below;
[tex]h = h_0 + v_0_yt - \frac{1}{2} gt^2\\\\0.9 = 2.5+ 0 - \frac{1}{2} (9.8) t^2\\\\0.9 = 2.5 - 4.9t^2\\\\4.9t^2 = 1.6\\\\t^2 = \frac{1.6}{4.9} \\\\t^2 = 0.327\\\\t = \sqrt{0.327} \\\\t = 0.57 \ s[/tex]
Minimum speedThe minimum speed of the ball is calculated as follows;
[tex]v_x = \frac{X}{t} \\\\v_x = \frac{15}{0.57} \\\\v_x = 26.3 \ m/s[/tex]
Time of motion from top of the high netThe time of motion from top of the high net is calculated as follows;
[tex]t = \sqrt{\frac{2h}{g} } \\\\t = \sqrt{\frac{2\times 0.9}{9.8} } \\\\t = 0.43 \ s[/tex]
Horizontal range = 0.43 x 26.3 = 11.3 m
Total time in air = 0.57 s + 0.43 s = 1.0 s
Learn more about horizontal velocity here: https://brainly.com/question/24949996
This is the path which one body follows around another body in space.
Answer:
Pls ezplain your question more
Explanation:
Answer:
orbit is the answer
PLEASE HELP GIVING BRAINLIEST!!
An object falls freely from rest on a planet
where the acceleration due to gravity is
29 m/s ^2
After 3.8 s, what will be its speed?
Answer in units of m/s.
Answer:
v=u+gt , initially u=0 and g acting in the direction of movement of body.
v=0+9.8×2
v=19.6m/s
Explanation:
sorry i dont have exact answer but hope this above equation will help you ....♡
What is the net force on a 1200-kg car that is accelerating at 8.5 m/s2?
Answer:
10,200 N
Explanation:
Given:
Mass of the car m = 1200 kg
Acceleration of the car a = 8.5 m/s^2
Force F=?
[tex]\because F = ma\\
\therefore F = 1200 \times 8.5\\
\therefore F = 10,200 N \\ [/tex]
What happens to the oceans tides if the ocean if the Earth spins slower?
Answer:
As the earth rotates, it tries to drag/bring the tidal bulges with it. When a large amount of friction is applied, the earth spin will gradually and slow down but not all the way down.
Answer:
If the Earth spun slower the rate of tides will be higher because the moon will start revolving faster tan the Earth, creating more tides as the moon will revolve more around the Earth in a month.
If my answer helped, kindly mark me as the brainliest !!
Thank You!!
A boy kicked off a cliff and lands 151m away 45s later. What was the initial velocity? How tall is the cliff?
procedure for determining the thermal conductivity of a solid involves embedding thermocouple in a thick slab of the material and measuring the response to a prescribed change in temperature at one surface. Consider an arrangement for which the thermocouple is embedded 10 mm from a surface that is suddenly brought to a temperature of 100degreeC by exposure to boiling water. If the initial temperature of the slab was 30degreeC and the thermocouple measures a temperature of 65degreeC, 2 minutes after the surface is brought to 100degreeC, what is the thermal conductivity. The density of the material is 2200 kg/m3 and the specific heat is 700 J/M- Find: What is the thermal conductivity of the material
Answer:
The thermal conductivity [tex]k = 1.4094 W/ m\cdot K[/tex]
Explanation:
From the question we are told that
The depth of the thermocouple from the surface is x = 10 mm = 0.01 m
The temperature is [tex]T_f = 100 ^o C[/tex]
The initial temperature is [tex]T_i = 30 ^o C[/tex]
The temperature of the thermocouple after t = 2 minutes( 2 * 60 = 120 \ seconds) is [tex]T_t = 65 ^o C[/tex]
The density of the material is [tex]\rho = 2200 kg/m^3[/tex]
The specific heat of the solid [tex]c_s = 700 J/kg \cdot K[/tex]
Generally the equation for semi -infinite medium is mathematically as
[tex]\frac{T_s - T }{T_i - T} = erf [\frac{x}{2 \sqrt{\alpha * t} } ][/tex]
[tex]\frac{65 - 100 }{30 - 100} = erf [\frac{x}{2 \sqrt{\alpha * t} } ][/tex]
[tex]0.5 = erf [\frac{0.01}{2 \sqrt{\alpha * 120} } ][/tex]
Here [tex]\alpha[/tex] is a constant with unit [tex]m^2 /s[/tex]
[tex]\frac{0.01}{ 2 (\sqrt{\alpha * 120 } )}[/tex] this is from the Gaussian function table
[tex]0.0 1 = 0.954 * (\sqrt{\alpha * 120 } )[/tex]
=> [tex]\sqrt{\alpha * 120 } = \frac{0.01 }{0.954 }[/tex]
=> [tex]\alpha = 9.1525 *10^{-7} \ m^2 /s[/tex]
Generally the thermal conductivity is mathematically represented as
[tex]k = \alpha * \rho * c_s[/tex]
[tex]k = 9.1525 *10^{-7} * 2200 * 700[/tex]
[tex]k = 1.4094 W/ m\cdot K[/tex]
Why is it important for scientists to find better ways to store solar and wind energy?
Answer:
Energy storage plays an important role in this balancing act and helps to create a more flexible and reliable grid system. For example, when there is more supply than demand, such as during the night when low-cost power plants continue to operate, the excess electricity generation can be used to power storage devices.
Explanation:
I hope this helps you out and if your feeling generous plz mark brainliest it helps me a lot thank you:)
It important for scientists to find better ways to store solar and wind energy because solar and wind energy have variable outputs.
Lately, the world have begun to gradually gravitate away from non renewable energy sources such as fossil fuels and research efforts have been concentrated on renewable energy sources such as solar and wind energy.
However, the energy output from these sources are variable. Therefore, it is necessary to device ways to store energy from these sources in order to improve overall energy supply.
Learn more: https://brainly.com/question/17319210
In most cases, what happens to a liquid when it cools? Its density increases. Its density decreases. Its mass increases. Its mass decreases. Its volume increases. Its volume decreases. (more than 1 correct answer)
Answer: density decreases
Explanation:
______ is a disease in which the body does not produce or probory use inslin
Answer:
Diabetes
Explanation:
Insulin is an important hormone that helps the body convert sugar, starches, and other foods into energy.
PLEASEEEEE THIS A TIMED TESTTTTTTTTT
Answer:
C
Explanation:
Answer:
that car got obliterated almost like the day my uncle said come with me
Explanation:
the outcome was not good
1)
What is the velocity in meters per second of a runner who runs exactly 110 m toward the beach in 72 seconds
Answer:
1.53 m/s toward the beach
Explanation:
1.53 m/s toward the beach
Explanation:
The magnitude of the velocity of the runner is given by:
where
d is the displacement of the runner
t is the time taken
In this case, d=110 m and t=72 s, so the velocity of the runner is
Velocity is a vector, so it consists of both magnitude and direction: we already calculate the magnitude, while the direction is given by the problem, toward the beach.
On a drive from your home to town, you
wish to average 60 mph. The distance from
your home to town is 78 miles. However,
at 39 miles (half way), you find you have
averaged only 45 mph.
What average speed must you maintain in
the remaining distance in order to have an
overall average speed of 60 mph?
Answer in units of mph.
On a drive from your home to town, you wish
to average 33.6 mph. The distance from your
home to town is 90 miles. However, at 45 miles
(half way), you find you have averaged only
25.2 mph.
What average speed must you maintain in
the remaining distance in order to have an
overall average speed of 33.6 mph?
Answer in units of mph
let the speed be x
total average = 33.6
12) If a man weighs 900 N-on the Earth, what would he weigh on Jupiter, where the acceleration due to gravity is 25.9 m/s?
Answer:
Force=Mass*acceleration
on earth, acceleration=9.81 m/s^2
900 N=Mass*9.81 m/s^2
Mass=91.74 Kg
F=Mass*acceleration(Jupiter)
F=91.74Kg*25.9m/s
F=2376.066 N on Jupiter
Plz mark me as brainliest if u found it helpful
Your shopping cart has a mass of 65 kilograms.In order to accelerate the shopping cart down an aisle at 0.30 m/s^2, what Force would you need to use or apply to the cart assuming the coefficient of friction between the cart and the floor is 0.01?
Answer:
25.88 N
Explanation:
Mass of the shopping cart,[tex]m=65 kg[/tex]
The coefficient of friction between the cart and the floor, [tex]\mu= 0.01[/tex]
Let, F be the required force to accelerate the cart at [tex]a=0.30 m/s^2[/tex].
Gravitational force, mg, acts downward which is being balanced by the normal reaction, N, on the cart by the floor.
As the motion of the cart in the vertical direction is zero. So, using the static equilibrium condition will be zero.
From free body diagram (FBD):
[tex]N-mg=0[/tex]
[tex]\Rightarrow N=mg.[/tex]
the net force action in this direction The frictional force, f, acts in the direction to opposes the motion of the cart as shown.
[tex]f=\muN=\mu mg[/tex]
Now, apply the dynamic equilibrium condition in the horizontal direction, i.e. net force acting on the body equals the rate of change of momentum of the body. From the FBD of the cart, we have
[tex]F-f-ma=0[/tex]
[tex]\Rightarrow F=f+ma[/tex]
[tex]\Rightarrow F=\mu mg+ma[/tex]
[tex]\Rightarrow F=m(\mu g +a)[/tex]
[tex]\Rightarrow F=65(0.01\times 9.81 + 0.3)[/tex]
[tex]\Rightarrow F=25.88 N.[/tex]
Hence, 25.88 N force required to accelerate the body with 0.03 [tex]m/s^2[/tex] .
how you brother and sister
Which platform has touch controls?
A.
consoles
B.
arcades
C.
personal computers
D.
mobiles
Answer:
I think it's D
Explanation:
Most mobiles have touch screens
If a 3.5 kg object is accelerating at 0.80 /s^2, the net force F causing this motion is ____ N.
A) 2.2
B)2.8
C)3.4
D)4.0
Answer:
The answer is option BExplanation:
To find the force acting on an object we use the formula
force = mass × accelerationFrom the question
mass = 3.5 kg
acceleration = 0.80 m/s²
We have
Force = 3.5 × 0.8
We have the final answer as
2.8 NHope this helps you
Lexington walked to her friends house.lexie walked 2miles west then 5 miles south then 3 miles east then 4 miles north then 2 miles east and finally 1 mile north what is levies distance and displacement.
A
6N
11 N
What is the net force ?
Answer:
66n
Explanation:
4376
If an object is on a 27º frictionless incline, what will be the acceleration of the object on the incline?
A mass of 15 kg is resting on a horizontal, frictionless surface. Force 1 of 206 N is applied to it at some angle above the horizontal, force 2 has a magnitude of 144 N and is applied vertically downward, force 3 has a magnitude of 5 N and is applied vertically upwards, and force 4 has a magnitude of 42 N and is applied in the -x direction to the object. When these forces are applied to the object, the object is moving at 20 m/s in the x direction in a time of 3 seconds. What is the normal force acting on the mass in Newtons
Answer:
N = 136.77 N
Explanation:
This is an exercise in Newton's second law, let's set a reference frame with the horizontal x-axis and the vertical y-axis. In the attachment we can see the applied forces.
Let's use trigonometry to decompose the force F1
cos θ = F₁ₓ / F₁
sin θ = F_{1y} / F₁
F₁ₓ = F₁ cos θ
F_{1y} = F₁ sin θ
now let's apply Newton's second law to each axis
X axis
F₁ₓ - F4 = m a
Y axis
N + F3 + F_{1y} -F₂ -W = 0
the acceleration can be calculated with kinematics
v = v₀ + a t
since the object starts from rest, the initial velocity is zero v₀ = 0
a = v / t
a = 20/3
a = 6.667 m / s²
we substitute in the equation
F₁ₓ = F₄ + m a
F₁ₓ = 42 + 15 6,667
F₁ₓ = 142 N
F₁ cos θ = 142
cos θ = 142/206 = 0.6893
θ = cos⁻¹ 0.6893
θ = 46.42º
now let's work the y axis
N = W + F₂ - F₃ - F_{1y}
N = 15 9.8 + 144 -5 - 206 sin 46.42
N = 286 - 149.23
N = 136.77 N
Activity_Mass_Balance_Recycle
Sea water must be desalinated by reverse osmosis. For a feed rate of 1000 lb/h sea water containing 3.1% salt (by weight) is desalinated water with only 500 ppm salt and the brine tailings containing 5.25% salt. Part of the brine tailings is recycled and the inlet stream in the reverse osmosis cell contains 4.0% salt. Determine:
a) A brine removal taxon (ṁ3);
b) The production rate of desalinated water (ṁ2);
c) The rate of brine that is recycled (ṁR).
Answers:
ṁ1 = 1720 lb / h
ṁ2 = 409.37 lb / h
ṁ3 = 590.63 lb / h
ṁR = 720 lb / h
Answer:
m₁ = 1720
m₂ = 413.46
m₃ = 586.54
mr = 720
Explanation:
Draw a diagram. Sea water (1000 lb/h, 3.1% salt) is mixed with the recycled brine (mr, 5.25% salt) to create the inlet stream (m₁, 4.0% salt). This inlet stream is fed into the osmosis cell. The osmosis cell produces desalinated water (m₂, 500 ppm) and brine tailings. Part of the tailings is recycled (mr, 5.25% salt), and the rest is removed (m₃, 5.25%).
The mass of water is conserved, so:
1000 + mr = m₁
m₁ = mr + m₂ + m₃
The mass of salt is conserved, so:
0.031 (1000) + 0.0525 mr = 0.040 m₁
0.040 m₁ = 0.0525 mr + 0.0005 m₂ + 0.0525 m₃
Four unknown variables, and four equations. We can use the first and third to find mr and m₁.
0.031 (1000) + 0.0525 mr = 0.040 (1000 + mr)
31 + 0.0525 mr = 40 + 0.040 mr
0.0125 mr = 9
mr = 720
m₁ = 1720
Now we can use these values and the second and fourth equations to solve for the remaining variables.
1720 = 720 + m₂ + m₃
0.040 (1720) = 0.0525 (720) + 0.0005 m₂ + 0.0525 m₃
1000 = m₂ + m₃
68.8 = 37.8 + 0.0005 m₂ + 0.0525 m₃
68.8 = 37.8 + 0.0005 m₂ + 0.0525 (1000 − m₂)
68.8 = 37.8 + 0.0005 m₂ + 52.5 − 0.0525 m₂
0.052 m₂ = 21.5
m₂ = 413.46
m₃ = 586.54
What is a point of view with regard to motion called in physics?
O reference grid
O displacement
O distance
O frame of reference
Answer:
Frame of reference
In 2006, NASA’s Mars Odyssey orbiter detected violent gas eruptions on Mars, where the acceleration due to gravity is 3.7 m/s2. The jets throw sand and dust about 62.0 m above the surface. Scientists estimate that the jets originate as high-pressure gas speeds through vents just underground at about 130 km/h. How much energy per kilogram of material is lost due to nonconservative forces as the high-speed matter forces its way to the surface and into the air? (Express your answer to two significant figures.)
Answer:
The unit energy losses due to nonconservative forces is 881.40 joules per kilogram.
Explanation:
We can estimate the unit energy losses of gas eruption by Principle of Energy Conservation and Work-Energy Theorem:
[tex]U_{g,1} + K_{1} = U_{g,2}+K_{2}+W_{loss}[/tex] (Eq. 1)
Where:
[tex]U_{g,1}[/tex] - Gravitational potential energy of gas eruptions at surface, measured in joules.
[tex]U_{g,2}[/tex] - Gravitational potential energy of gas eruptions at highest height, measured in joules.
[tex]K_{1}[/tex] - Translational kinetic energy of gas eruptions at surface, measured in joules.
[tex]K_{2}[/tex] - Translational kinetic energy of gas eruptions at highest height, measured in joules.
[tex]W_{loss}[/tex] - Energy losses due to nonconservative forces, measured in joules.
We clear the component associated with energy losses in (Eq. 1):
[tex]W_{loss} = U_{g,1}-U_{g,2}+ K_{1}-K_{2}[/tex]
And we expand it afterwards:
[tex]W_{loss} = m\cdot g\cdot (z_{1}-z_{2}) + \frac{1}{2}\cdot m \cdot (v_{1}^{2}-v_{2}^{2})[/tex] (Eq. 2a)
[tex]w_{loss} = g\cdot (z_{1}-z_{2})+\frac{1}{2}\cdot (v_{1}^{2}-v_{2}^{2})[/tex] (Eq. 2b)
Where:
[tex]W_{loss}[/tex] - Energy losses due to nonconservative forces, measured in joules.
[tex]w_{loss}[/tex] - Unit energy losses due to nonconservative forces, measured in joules per kilogram.
[tex]g[/tex] - Gravitational acceleration, measured in meters per second.
[tex]z_{1}[/tex], [tex]z_{2}[/tex] - Bottom and top height, measured in meters.
[tex]v_{1}[/tex], [tex]v_{2}[/tex] - Gas eruption speeds at surface and highest heights, measured in meters per second.
If we know that [tex]g = 3.7\,\frac{m}{s^{2}}[/tex], [tex]z_{1} = 0\,m[/tex]. [tex]z_{2} =62\,m[/tex]. [tex]v_{1} = 36.111\,\frac{m}{s}[/tex] and [tex]v_{2} = 0\,\frac{m}{s}[/tex], the unit energy losses are:
[tex]w_{loss} = \left(3.7\,\frac{m}{s^{2}} \right)\cdot (62\,m-0\,m)+\frac{1}{2} \cdot \left[\left(36.11\,\frac{m}{s} \right)^{2}-\left(0\,\frac{m}{s} \right)^{2}\right][/tex]
[tex]w_{loss} = 881.40\,\frac{J}{kg}[/tex]
The unit energy losses due to nonconservative forces is 881.40 joules per kilogram.
What determines the radiation that an electromagnetic wave emits?
A 0.5 kg mass moves 40 centimeters up the incline shown in the figure below. The vertical height of the incline is 7 centimeters. What is the change in the potential energy (in Joules) of the mass as it goes up the incline?
Answer:
The change in potential energy of the mass as it goes up the incline is 0.343 joules.
Explanation:
We must remember in this case that change in the potential energy is entirely represented by the change in the gravitational potential energy. From Work-Energy Theorem and definition of work we get that:
[tex]U_{g}= m\cdot g\cdot \Delta y[/tex]
Where:
[tex]U_{g}[/tex] - Gravitational potential energy, measured in Joules.
[tex]m[/tex] - Mass, measured in kilograms.
[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.
[tex]\Delta y[/tex] - Change in vertical height, measured in meters.
This work is the energy needed to counteract effects of gravity at given vertical displacement.
If we know that [tex]m = 0.5\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex] and [tex]\Delta y = 0.07\,m[/tex], the change in the potential energy of the mass as it goes up the incline is:
[tex]U_{g} = (0.5\,kg)\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot (0.07\,m)[/tex]
[tex]U_{g} = 0.343\,J[/tex]
The change in potential energy of the mass as it goes up the incline is 0.343 joules.
The change in the potential energy (in Joules) of the mass as it goes up the incline is 0.343 J.
Calculation of the change in the potential energy:We know that
Potential energy = m*g*h
Here m means the mass = 0.5 kg
g means the gravity = 9.8
And, the h means the height = 7cm = 0.07m
So, the change in the potential energy should be
=0.5*9.8*0.07
=0.343 J
hence, we can conclude that the change in the potential energy (in Joules) of the mass as it goes up the incline is 0.343 J.
Learn more about energy here: https://brainly.com/question/13203990
A baseball player is running at a constant velocity on a level field and tosses a baseball straight up. When the ball comes back down, it will land
Answer:
]
Explanation:
