A 1,269 kg rocket is traveling at 413 m/s with 2,660 kg of fuel on board. If the rocket fuel travels at 1,614 m/s relative to the rocket, what is the rockets final velocity after it uses half of its fuel?

Answer:

Explanation:

According to snell's law which states that the ratio of the sin of incidence (i) to the angle of refraction(n) is a constant for a given pair of media.

sini/sinr = n

n is the constant = refractive index

Since the diver shines light up to the surface of a flat glass-bottomed boat, the refractive index n = nw/ng

nw is the refractive index of water and ng is that of glass

sini/sinr = nw/ng

given i = 30°, nw = 1.33, ng = 1.5, r = angle the light leave the glass

On substitution;

sin 30/sinr = 1.33/1.5

1.5sin30 = 1.33sinr

sinr = 1.5sin30/1.33

sinr = 0.75/1.33

sinr = 0.5639

r = arcsin0.5639

r ≈35°

angle the light leave the glass is 35°

Answer:

  B/4

Explanation:

The magnetic field strength is inversely proportional to the square of the distance from the current. At double the distance, the strength will be 1/2^2 = 1/4 of that at the original distance:

The field at twice the distance is B/4.

Answer:

It will lose electrical potential energy.

Explanation:

A photon held at rest in a uniform electrical field will lose electrical potential energy when it is released this is because the electrical potential energy is the energy posses by the photon at rest or by virtue of the position is converted to kinetic energy which is energy posses by a body in motion.

Since the photon is released and set in motion , it now has kinetic energy and has lost the potential energy because it is set in motion.

Answer:

Explanation:

Ex(z,t) = Eocos(kz - ω t + φ)

k = 2π/λ  , ω = 2π f

φ = +30° , E₀ = 10³ V .

z/λ = 0.25 , ft = 0.125

Ex(z,t) = Eocos(2πz/λ - 2πf t + φ)

Putting the values given above

Ex(z,t) = 10³ cos ( 2π / 4 - 2π x .125 + 30⁰ )

= 1000cos (90⁰ - 45+30)

= 1000 cos 75

=258.8  V .

Answer:

e.) power you supply to the crate

Explanation:

According to given data, we have:

F = Force exerted on the crate

M = Mass of the crate

v = Speed of motion of the crate

d = Distance traveled by the crate across the floor

t = Time interval passed

Now, we try to analyze the given quantity:

=> F d/t

=> (Force)(Displacement)/(Time)

but, (Force)(Displacement) = Work Done

Therefore,

=> Work Done/Time

but, Work Done/Time = Power

Therefore,

=> Power

Hence, the quantity F d/t is:

e.) power you supply to the crate

Answer:

7.2 m/s

Explanation:

The maximum speed is the amplitude times the frequency.

v = Aω

v = (0.76 m / 2) (180 rev × 2π rad/rev / 60 s)

v = 7.2 m/s

Answer:

(a) 0.0885 Hz

(b) 0.21 m/s

Explanation:

(a) Frequency: This can  be defined as the number of cycle completed in one seconds.

From the question,

Note: 2 crest = one cycle,

If four crest = 22.6 s,

Then two crest = (22.6/2) s

= 11.3 s.

T = 11.3 s

But,

F = 1/T

F = 1/11.3

F = 0.0885 Hz.

(b)

Using,

V = λF...................... Equation 1

Where V = speed of wave, F = Frequency of wave, λ = wave length.

Given: F = 0.0885 Hz, λ = 2.37 m.

Substitute these values into equation 1

V = 2.37(0.0885)

V = 0.21 m/s.

Answer:

Explanation:

Let the tension in the string be T . At the top of the circle , total force acting on them = T + mg . This will provide centripetal force

T + mg = m v² / r

4 + .25 x 9.8 = .25 x v² / .62

6.45 = .25 v² / .62

v² = 16

v = 4 m /s .

Complete Question

The complete question is shown on the first uploaded image  

Answer:

The uncertainty in inverse frequency is  [tex]\Delta [\frac{1}{w} ]= \frac{3}{2000} \ s[/tex]

Explanation:

From the question we are told that

   The value of the proportionality constant is  [tex]k = 5 \frac{Hz }{T}[/tex]

   The strength of the magnetic field is  [tex]B = 20 \ T[/tex]

   The change in this strength of magnetic field is  [tex]\Delta B = 3 \ T[/tex]

The magnetic field is given as

           [tex]B = \frac{k}{\frac{1}{w} }[/tex]

Where [tex]w[/tex] is frequency

The uncertainty or error of the field is given as

         [tex]\Delta B = \frac{k }{[\frac{1}{w}^]^2 } \Delta [\frac{1}{w} ][/tex]

The uncertainty in inverse frequency is given  as

           [tex]\Delta [\frac{1}{w} ] = \frac{\Delta B}{k [\frac{1}{w^2} ]}[/tex]

                    [tex]\Delta [\frac{1}{w} ]= \frac{\Delta B}{k (B)^2 }[/tex]

substituting values

                  [tex]\Delta [\frac{1}{w} ]= \frac{3}{5 (20)^2 }[/tex]

               [tex]\Delta [\frac{1}{w} ]= \frac{3}{2000} \ s[/tex]

Answer:

[tex]B_T=2.0*10^-5[-\hat{i}+\hat{j}]T[/tex]

Explanation:

To find the magnitude of the magnetic field, you use the following formula for the calculation of the magnetic field generated by a current in a wire:

[tex]B=\frac{\mu_oI}{2\pi r}[/tex]

μo: magnetic permeability of vacuum = 4π*10^-7 T/A

I: current = 6.0 A

r: distance to the wire in which magnetic field is measured

In this case, you have four wires at corners of a square of length 9.0cm = 0.09m

You calculate the magnetic field in one corner. Then, you have to sum the contribution of all magnetic field generated by the other three wires, in the other corners. Furthermore, you have to take into account the direction of such magnetic fields. The direction of the magnetic field is given by the right-hand side rule.

If you assume that the magnetic field is measured in the up-right corner of the square, the wire to the left generates a magnetic field (in the corner in which you measure B) with direction upward (+ j), the wire down (down-right) generates a magnetic field with direction to the left (- i)  and the third wire generates a magnetic field with a direction that is 45° over the horizontal in the left direction (you can notice that in the image attached below). The total magnetic field will be:

[tex]B_T=B_1+B_2+B_3\\\\B_{T}=\frac{\mu_o I_1}{2\pi r_1}\hat{j}-\frac{\mu_o I_2}{2\pi r_2}\hat{i}+\frac{\mu_o I_3}{2\pi r_3}[-cos45\hat{i}+sin45\hat{j}][/tex]

I1 = I2 = I3 = 6.0A

r1 = 0.09m

r2 = 0.09m

[tex]r_3=\sqrt{(0.09)^2+(0.09)^2}m=0.127m[/tex]

Then you have:

[tex]B_T=\frac{\mu_o I}{2\pi}[(-\frac{1}{r_2}-\frac{cos45}{r_3})\hat{i}+(\frac{1}{r_1}+\frac{sin45}{r_3})\hat{j}}]\\\\B_T=\frac{(4\pi*10^{-7}T/A)(6.0A)}{2\pi}[(-\frac{1}{0.09m}-\frac{cos45}{0.127m})\hat{i}+(\frac{1}{0.09m}+\frac{sin45}{0.127m})]\\\\B_T=\frac{(4\pi*10^{-7}T/A)(6.0A)}{2\pi}[-16.67\hat{i}+16.67\hat{j}]\\\\B_T=2.0*10^-5[-\hat{i}+\hat{j}]T[/tex]

Answer:

Explanation:

If there is only 1 force, the body can never be in equilibrium, providing that the force is not zero (and that would hardly be a force. Zero is possible in math and it means something. It is debatable in physics).

You cannot think of a condition where something is stationary on planet earth and there are not 2 forces or more forces involved.

Think of something like a block of wood sitting on a table. It is not moving, we'll say. Gravity is holding it down, but what is pushing up on it?

The table is. There are 2 forces and they are equal in magnitude, but opposite in direction. That matters.

Explanation:

Draw a free body diagram of the pendulum (the combination of the sphere and the massless rod).  There are three forces on the pendulum:

Weight force mg at the center of the sphere,

Reaction force in the x direction at the pivot,

Reaction force in the y direction at the pivot.

Sum the torques about the pivot O.

∑τ = I d²θ/dt²

mg (L sin θ) = I d²θ/dt²

For small θ, sin θ ≈ θ.

mg L θ = I d²θ/dt²

Since d²θ/dt² is directly proportional to θ, this fits the definition of simple harmonic motion.

If you wish, you can use parallel axis theorem to find the moment of inertia about O:

I = Icm + md²

I = ⅖ mr² + mL²

mg L θ = (⅖ mr² + mL²) d²θ/dt²

gL θ = (⅖ r² + L²) d²θ/dt²

Answer:

The distance from the cornea vertex to the retina is 2.36 cm

Explanation:

The question is incomplete.

The complete question is as follows;

A Nearsighted Eye. A certain very nearsighted person cannot focus on anything farther than 36.0 cm from the eye. Consider the simplified model of the eye. In a simplified model of the human eye, the aqueous and vitreous humors and the lens all have a refractive index of 1.40, and all the refraction occurs at the cornea, whose vertex is 2.60 cm from the retina.

If the radius of curvature of the cornea is 0.65 cm when the eye is focusing on an object 36.0 cm from the cornea vertex and the indexes of refraction are as described before, what is the distance from the cornea vertex to the retina?

Solution.

We use image-object reaction to calculate the distance from the cornea vertex to the retina.

Mathematically;

n1/s + n2/s’ = n2-n1/R

From the question, we identify the following;

n1 ; Refractive index of air = 1

n2 ; Refractive index of lens = 1.4

S ; Object Distance = 36 cm

S’ = ?

R ; Radius of curvature of the cornea = 0.65

Substituting these values into the equation above;

1/36 + 1.4/S’ = (1.4-1)/0.65

{S’+ 36(1.4)}/36S’ = 0.4/0.65

{S’ + 50.4}/36S’ = 0.62

S’ + 50.4 = 22.32S’

50.4 = 22.32S’ -S’

21.32S’ = 50.4

S’ = 50.4/21.32

S’ = 2.36 cm

Answer:

x = 3.76 cm

y = 3.76 cm

Explanation:

This composite shape can be modeled as a square (7.2 cm × 7.2 cm) minus a quarter circle in the lower left corner (3.6 cm radius) and a right triangle in the upper right corner (3.6 cm × 3.6 cm).

The centroid of a square (or any rectangle) is at x = b/2 and y = h/2.

The centroid of a quarter circle is at x = y = 4r/(3π).

The centroid of a right triangle is at x = b/3 and y = h/3.

Build a table listing each shape, the coordinates of its centroid (x and y), and its area (A).  Use negative areas for the shapes that are being subtracted.

Next, multiply each coordinate by the area (Ax and Ay), sum the results (∑Ax and ∑Ay), then divide by the total area (∑Ax / ∑A and ∑Ay / ∑A).  The result will be the x and y coordinates of the center of mass.

See attached image.

Answer:

About 3.06 seconds

Explanation:

[tex]v_f=v_o+at[/tex]

Since at the peak of its trajectory, the ball will have no velocity, you can write the following equation:

[tex]0=30+(-9.81)t\\\\-30=-9.81t\\\\t\approx 3.06s[/tex]

Hope this helps!

Answer:

I = 4.189 mA    V = 0.338 V

Explanation:

In order to do this, we need to apply the following expression:

I = Is[exp^(qV/kT) - 1]   (1)

However, as the junction of the diode is illuminated, the above expression changes to:

I = Iopt + Is[exp^(qV/kT) - 1]   (2)

Now, as the shunt resistance becomes infinite while the current becomes zero, we can say that the leakage current is small, and so:

I ≅ Iopt

Therefore:

I ≅ I₀Aλq / hc  (3)

Where:

I₀A = Area of diode (radiation)

λ: wavelength

q: electron charge (1.6x10⁻¹⁹ C)

h: Planck constant (6.62x10⁻³⁴ m² kg/s)

c: speed of light (3x10⁸ m/s)

Replacing all these values, we can get the current:

I = (8x10⁻³) * (0.65x10⁻⁶) * (1.6x10⁻¹⁹) / (6.62x10⁻³⁴) * (3x10⁸)

I = 4.189x10⁻³ A or 4.189 mA

Now that we have the current, we just need to replace this value into the expression (2) and solve for the voltage:

I = Is[exp^(qV/kT) - 1]

k: boltzman constant (1.38x10⁻²³ J/K)

4.189x10⁻³ = 9x10⁻⁹ [exp(1.6x10⁻¹⁹ V / 1.38x10⁻²³ * 300) - 1]

4.189x10⁻³ / 9x10⁻⁹ = [exp(38.65V) - 1]

465,444.44 + 1  = exp(38.65V)

ln(465,445.44) = 38.65V

13.0508 = 38.65V

V = 0.338 V

Answer:

a)188.65m

b)154.35m

c)243.7m

Explanation:

Given data:

[tex]t_A=0.55s[/tex]

[tex]t_B=0.45s[/tex]

(a) The distance from the kicker to each of the 2 spectators is given by:

[tex]d_A=v \times t_A[/tex]

where,

v= speed of sound

[tex]t_A[/tex]=time taken for the sound waves to reach the ears

[tex]d_A=343\times 0.55=188.65[/tex]m

(b)[tex]d_B=v \times t_B[/tex]

where,

v= speed of sound

[tex]t_B[/tex]=time taken for the sound waves to reach the ears

[tex]d_B=343\times 0.45=154.35m[/tex]

(c)As the angle b/w slight lines  from the two spectators to the player is right angle,

hypotenuse=the distance b/w 2 spectators

and, the slight lines are the other 2 lines

[tex]D^2=d_A^2+d_B^2\\D=\sqrt{188.65^2+154.35^2} \\D= 243.7m[/tex]

Explanation:

Complete the first and second sentences, choosing the correct answer from the given ones.

1. T = 100 K

[tex]^{\circ}C=K-273[/tex]

Put T = 100 K

[tex]T=100-273=-173^{\circ} C[/tex]

A temperature of 100 K corresponds on a Celsius scale to (-173 °C)

2. T = 50 °C

[tex]K=^{\circ}C+273\\\\K=50+273\\\\T=323\ K[/tex]

So, At 50 °C, it corresponds to a Kelvin scale of 323 K.

Answer: A and D

a. Many objects move in arcs of circles or complete circles at times, and polar coordinates allowthe motion of such objects to be comprehended more easily. Some of Newton's laws in certaincases, such as calculation ofg from first principles, are much easier to calculate using polar coordinates.

b. "These coordinates are just used to confuse students.

c. ""Physics teachers are helping math teachers by getting students to practice theirtrigonometry.

d. ""In some cases, such as addition of forces, where a force magnitude is specified, it is simpler todescribe the forces in polar coordinates and be able to convert to the xy representation.

Explanation:

(A). Any force possessing a fixed magnitude and direction, it's always important to describe the for exactly as it is and also be able to convert it from one coordinate representation to another.

(D). Anything which involves radial motion(this is a motion along a radius) or motion along an arc of a circle or ellipse, this kind of motion is best explained and easily understood when in polar coordinates.

Answer:

18.89cm

Explanation:

As we know that the person is standing 5m in front of the camera

[tex]d_0=5m=500cm[/tex]

The focal length of the lens =50cm

f=50 cm

By Lens formula we have:

[tex]\dfrac{1}{f} = \dfrac{1}{d_i} + \dfrac{1}{d_o}\\\dfrac{1}{50} = \dfrac{1}{d_i} + \dfrac{1}{500}\\\dfrac{1}{d_i} =\dfrac{1}{50}-\dfrac{1}{500}\\\dfrac{1}{d_i}=0.018\\d_i=55.56cm[/tex]

By the formula of magnification

[tex]\dfrac{h_i}{h_o} = \dfrac{55.56}{500}\\\\h_i = \dfrac{55.56}{500} \times h_o\\\\ h_o=1.70m=170cm\\\\Therefore: h_i=\dfrac{55.56}{500} \times$ 170 cm\\\\h_i =18.89 cm[/tex]

The height of the image formed is 18.89cm.

Answer:

a = 5.34 m/s²

T = 37.86 N

Explanation:

This is the case where two masses are hanging vertically on sides of the pulley. In such case, the formula for acceleration of objects is derived to be:

a = g(m₂ - m₁)/(m₂ + m₁)

where,

a = acceleration of both masses = ?

g = 9.8 m/s²

m₂ = heavier mass = 8.5 kg

m₁ = lighter mass = 2.5 kg

Therefore,

a = (9.8 m/s²)(8.5 kg - 2.5 kg)/(8.5 kg + 2.5 kg)

a = (9.8 m/s²)(6 kg)/(11 kg)

a = 5.34 m/s²

The formula for tension in cable is derived to be:

T = 2m₁m₂g/(m₁ + m₂)

T = (2)(2.5 kg)(8.5 kg)(9.8 m/s²)/(2.5 kg + 8.5 kg)

T = 37.86 N

Answer:

c. 5.50 km

Explanation:

8 min * 1h/(60 min) = 8/60 = 2/15 h

15 sec* 1 min/60 sec = 1/4 min * 1h/(60 min) =  1/240 h

8 min 15 sec = (2/15+1/240)h

40 km/h *(2/15 +1/240)h =5.50 km

Answer: 5.50 km

Explanation:

Answer:

1.25kg

Explanation:

Simply multiply volume and density together

Answer:

The volume of the marble is [tex]523.33\ mm^2[/tex].

Explanation:

Marble is spherical in shape. The diameter of marble is 10 mm. It radius will be 5 mm.

The volume of spherical shaped object is given by :

[tex]V=\dfrac{4}{3}\pi r^3[/tex]

Plugging all the values, we get :

[tex]V=\dfrac{4}{3}\times 3.14\times (5)^3\\\\V=523.33\ mm^2[/tex]

So, the volume of the marble is [tex]523.33\ mm^2[/tex].

Answer:

A) The two potatoes cover the same horizontal distance from the launcher.

B) Mark's potato spends more time in the air than Marvin's potato before hitting the ground.

C) Marvin's potato hits the ground with a greater speed than Mark's potato

Explanation:

A) For projectile motion, the final horizontal distance of the projectile from where it was initially launched (its range) is given as

R = (u² sin 2θ)/g

where

u = initial velocity of the projectile

θ = angle above the horizontal at which the projectile was launched = 30°, 60°

g = acceleration due to gravity on Mars

Since, u and g are the same for Mark and Marvin, sin 2θ would determine which range is higher.

Sin (2×60°) = sin 120°

Sin (2×30°) = sin 60°

Sin 120° = Sin 60°

Hence, the two potatoes cover the same horizontal distance from the launcher.

B) Time spent in the air for a projectile is given as

T = (2u sin θ)/g

Again, since u and g are the same for Mark and Marvin on Mars, sin θ will give the required idea of whose potato spends more time in the air.

Sin 60° = 0.866

Sin 30° = 0.50

Sin 60° > Sin 30°

Hence, Mark's potato spends more time in the air than Marvin's potato.

C) The horizontal velocity for projectile motion is constant all through the motion and is equal to u cos θ

u cos 60° < u cos 30°

And the initial vertical velocity is u sin θ

Final vertical velocity

= (initial vertical velocity) - gt

g = acceleration due to gravity on Mars

T = time of flight

For Mark,

initial vertical velocity = u sin 60°, greater than Marvin's u sin 30°

And Mark's potato's time of flight is greater as established in (B) above.

But for Marvin

initial vertical velocity = u sin 30°, less than Mark's u sin 60°

And Marvin's potato's time of flight is lesser as established in (B) above

So, at the end of the day, the final vertical velocity is almost the same for both Mark's and Marvin's potatoes.

Hence, the horizontal component of the final velocity edges the final speed of the potatoes just before hitting the ground in Marvin's favour.

Hope this Helps!!!

Answer:

The curve should be banked at an angle of 13 degrees.

Explanation:

We have,

Radius of a highway curve is 274 m

Speed of car on this curve is 25 m/s

Let [tex]\theta[/tex] is the banking angle. On a banked curve, the angle of safe diving is given by following expression.

[tex]\tan\theta=\dfrac{v^2}{Rg}[/tex]

g = 10 m/s²

Plugging all the values in above formula,

[tex]\tan\theta=\dfrac{(25)^2}{274\times 9.8}\\\\\theta=\tan^{-1}\left(\dfrac{(25)^{2}}{274\times9.8}\right)\\\\\theta=13^{\circ}[/tex]

So, the curve should be banked at an angle of 13 degrees.

Answer:

2500 N/m²

Explanation:

Pressure: This can be defined as the force acting normally on a surface per unit area.

The expression for pressure is give as

P = F/A...................... Equation 1

Where P = pressure (N/m²), F = force (N), A = Contact area (m²)

Given: F = 500 N, A = 2000 cm² = (2000/10000) m = 0.2 m.

Substitute into equation  1

P = 500/0.2

P = 2500 N/m²

Hence the pressure exerted to the surface is 2500 N/m²

Answer:

The work done by the force is  5.76 J

Explanation:

Given;

mass of canister , m = 3.2 kg

magnitude of force, f = 6.7 N

initial velocity of the canister on x-axis,  [tex]v_i[/tex]= 3.3i m/s

final velocity of the canister on y- axis, [tex]v_f[/tex] = 6.9j m/s

The work done on the canister = change in the kinetic energy of the canister

[tex]W = K.E_f - K.E_i[/tex]

where;

K.Ei is the initial kinetic energy

K.Ef is the final kinetic energy

The initial kinetic energy:

[tex]K.E_i = \frac{1}{2} *m\sqrt{i^2 +j^2+z^2}\\\\K.E_i = \frac{1}{2} *3.2\sqrt{3.3^2 +0^2+0^2}\\\\K.E_i = 5.28 \ J[/tex]

The final kinetic energy:

[tex]K.E_f = \frac{1}{2} *m\sqrt{i^2 +j^2+z^2}\\\\K.E_f = \frac{1}{2} *3.2\sqrt{0^2 +6.9^2+0^2}\\\\K.E_f = 11.04 \ J\\[/tex]

W = 11.04 - 5.28

W = 5.76 J

Therefore, work done on the canister by the 6.7 N force during this time is 5.76 J

Answer:

89.11kg

Explanation:

Note an object weighs less when in a fluid and the weight of the volume of the fluid displaced is known as the upthrust.

Now, the person is going to displace the volume 89/1025 =0.087m3 { from density D = mass(M)/volume(V)}

The weight of the fluid displaced is the density of the fluid × volume of fluid displaced.

The weight of the fluid=0.087m3× 1kg/me = 0.087kg

Now the weight of the fluid displaced is referred to as the upthrust.

Now the real weight - the apparent weight = the upthrust.

Hence the apparent weight = real weight - upthrust

Apparent weight = 89.2-0.087 = 89.11kg