2. How many moles of hydrogen are produced from the reaction of 3.86 moles of zinc with an excess of
hydrochloric acid?
Answer:
as per given balanced equation one mole Zn produces 1mole Hydrogen
when reacted with excess acid.
So 3 moles Zn will give 3moles Hydrogen
Explanation:
According to the balanced chemical equation, one mole of Zn produces one mole of hydrogen . Therefore, 3.86 moles of Zn metal will produce 3.86 moles of hydrogen gas.
What is mole ratio ?Mole ratio refers to the ratio of the number of moles of one substance in a chemical reaction to the number of moles of another substance in the same reaction.
It is derived from the balanced chemical equation for the reaction, which indicates the relative amounts of each substance involved in the reaction.
Mole ratio is important in stoichiometry, which is the study of the quantitative relationships between reactants and products in a chemical reaction.
The given chemical reaction is written as follows:
Zn + 2 HCl ⇒ ZnCl₂ + H₂
According to the balanced chemical equation, one mole of Zn produces one mole of hydrogen . Therefore, 3.86 moles of Zn metal will produce 3.86 moles of hydrogen gas.
Find more on mole ratio :
https://brainly.com/question/15288923
#SPJ2
Set the Room temp. to -10.0 °C and observe. What is happening?
plzzz i need help on the ASAP no files/links
Answer:
its getting colder
Explanation:
Science help this is my last question
Answer:
P waves travel faster than other waves
Explanation:
P waves travel fastest and are the first to arrive from the earthquake. In S or shear waves, rock oscillates perpendicular to the direction of wave propagation. In rock, S waves generally travel about 60% the speed of P waves, and the S wave always arrives after the P wave.
2. The diagram shows a Zn/MnO2-KOH alkaline dry cell.
In your response, do the following:
• Label all parts.
• Label the cathode and the anode, including the charges on each.
• Show the flow of electrons.
• Explain how the cell works. Include the oxidation and reduction half-reactions in your explanation.
Answer:
1. Graphite rod (cathode)
2. Positive terminal
3. Solid zinc layer (anode)
4. Paste (reduction takes place here)
5. Negative terminal
Explanation:
This was the only thing i could find on it. hope this helps.
Answer:
Explanation:
• Label all parts.
1. Cathode or Graphite Rod
2. Positive terminal
3. Anode or Solid Zinc layer
4. Electrolyte Paste (reduction takes place here)
5. Negative Terminal (maybe this could also be the Zinc casing)
• Label the cathode and the anode, including the charges on each.
The anode is the zinc layer is negatively charged and the cathode is the graphite rod is positively charged.
• Show the flow of electrons.
The zinc casing is oxidized and the electrons flow along the zinc layer, into the negative terminal, and then out the negative terminal. The electrons move from the wire to the graphite rod. Then from the rod the electrons move to the paste, then the past goes through reduction. The anode gets a negative charge as electrons are released, and the cathode gets a positive charge as the electrons, which are negatively charged, are consumed.
• Explain how the cell works. Include the oxidation and reduction half-reactions in your explanation.
Alkaline dry cells use spontaneous oxidation-reduction reactions to convert chemical energy to electrical energy. According to the lesson ‘’Half-reactions are combined in a small casing, but still separated into half-cells.’’
2A + N2 -> 2AIN How many moles of aluminum nitride form when 5.00 g of aluminum reacts with excess nitrogen? K 0.0925 mol 0 0.185 mol Oleo mol z se mol
Answer:
0.185 moles of AlN
Explanation:
The equation is:
2Al + N₂ → 2AlN
This reaction indicates that 2 mol of aluminum can react to 1 mol of nitrogen to produce 2 moles of aluminum nitride.
We convert the aluminum's mass to moles
5 g/ 26.98 g/mol = 0.185 moles.
2 moles of Al are needed to produce 2 moles of AlN
so, ratio is 1:1
In conclussion we say:
0.185 moles of Al, must produce 0.185 moles of AlN
What does an electromagnetic spectrum refer to?
O A. The energy of a photon emitted when an electron changes energy
levels
B. An angled piece of glass that splits up light into different
wavelengths
O C. A range of wavelengths of light that increases from one end to the
other
O D. The relationship between energy, wavelength, and frequency of
light
SUBMIS
Answer:
Explanation:
Option C is the correct answer
Among electromagnetic waves, UV rays are most dangerous because exposure to these radiation cause serious problems in living organism. Therefore, the correct option is option C.
What is electromagnetic wave?Electromagnetic wave is a wave which contain two component one is electric component and other is magnetic component. The electric and magnetic component are perpendicular to each other. There are so many wave that comes under electromagnetic wave like infrared wave , radio wave.
There is a relation between energy of wave. frequency of wave, and wavelength of wave
Mathematically,
E=hc/λ
where,
E = energy of electromagnetic wave
h is planks constant having value 6.67×10⁻³⁴js
c is speed of light that is 3×10⁸m/s
λ is the wavelength of electromagnetic wave
An electromagnetic spectrum refer to a range of wavelengths of light that increases from one end to the other.
Therefore, the correct option is option C.
To know more about electromagnetic wave, here:
https://brainly.com/question/12289372
#SPJ2
[tex]plz \: help \: me \: it \: is \: due \: 2moro[/tex]
Answer:
hi.
Explanation:
1. B
2. C
3. A
4. B
5.B
hope this helps
When you add the pH value of a solution to the pOH value of the same
solution together, at 25 degrees C, what should the combined value be?
ANSWER CHOICES
1. 7
2. 0, they should cancel each other out
3. 14
4. It’s indeterminate until you know the concentration values of hydrogen and hydroxide ions in solution
Answer:
3
Explanation:
pH+pOH=14
What is a primary difference between bacteria that are in the
kingdom Archaea and other bacteria?
Answer:
Is there a way you can give a answer made for a 5th grade
Explanation:
Is NaCl solute or water ?
Calculate the heat absorbed, in kJ, when 2000. g of water is heated from 20.0 °C to 99.7 °C in an electric kettle
Answer:
666.93 kJ
Explanation:
Using the formula;
Q = m × c × ∆T
Where;
Q = amount of heat absorbed (Joules)
m = mass of substance (g)
c = specific heat capacity (4.184 J/g°C)
∆T = change in temperature (°C)
Based on the information provided in the question;
Q = ?
m = 2000g
∆T = 99.7 °C - 20 °C = 79.7 °C
c = 4.184 J/g°C
Using Q = m × c × ∆T
Q = 2000 × 4.184 × 79.7
Q = 666929.6 Joules
To calculate the amount of heat absorbed (Q) in kilojoules (kJ), we say;
1 joule = 0.001 kilojoule
666929.6 Joules = 666929.6 × 0.001
= 666.9296 KJ
Approximately, Q = 666.93 kJ.
How can scientists model the effects of reactant concentration on the speed of a reaction?
A. With a ball-and-stick model
B. With a structural model
C. With a computer model
D. With an atomic model
Answer: it is D
Explanation:
Scientists can model the effects of reactant concentration on the speed of a reaction With an atomic model. Hence, D is correct.
What is an atomic model?Atomic model, in physics, a model used to describe the structure and makeup of an atom. Atomic models have gone through many changes over time, evolving as necessary to fit experimental data. For a more in-depth discussion of the history of atomic models, see atom: development of atomic theory.
Scientists use models to study atoms because atoms are extremely small and can't even be seen. If atoms can't be seen, it's easier to study and predict what atoms will do with a representation of them.
Models are useful tools in learning science which can be used to improve explanations, generate discussion, make predictions, provide visual representations of abstract concepts and generate mental models.
Therefore, Scientists can model the effects of reactant concentration on the speed of a reaction With an atomic model. Hence, D is correct.
Learn more about atomic model, here:
https://brainly.com/question/1596638
#SPJ2
a primary means of conveying messages between human
Answer:
The primary means of conveying messages between human are verbal, nonverbal, and visual.
Explanation:
1. Verbal communication depends on words to deliver meaning.
2. Nonverbal communication occurs when meaning or messages are sent or received without the use of words.
3. Visual communication utilizes drawings, illustrations, pictures, colors, graphs, charts, and signs to share meaning.
The verbal method of talking is the primary means of conveying messages among humans.
What makes speaking possible?Speech is spoken language used by people to communicate. The ability to modify voices through the articulation of laryngeal tones into audible oral speech is something that humans have learnt to do, despite the fact that many animals have voices of varied sorts and inflectional capacities.
A bellows-like respiration activator, which provides the driving energy in the shape of an updraft, a phonating sound generator in the larynx (low in the throat), to transform the energy, an audio tunable in the pharynx (higher in the throat), where the independent voice structure is moulded, and a speech-forming device that is connected in the oral cavity represent as the mechanisms for human speech (mouth).
The four structures usually, but not always, work closely together. Toneless whispering can provide audible communication without any voice, and some parts of yodelling that depend on pharyngeal and laryngeal alterations can produce phonation without oral articulation. Lipreading may be accomplished by silent articulation without voice or breath.
Therefore, speech is the primary method of communication among humans.
Read more about speech, here
https://brainly.com/question/1888821
#SPJ2
saras car is advertised to get 43 miles per gallon. Sara calculated her gas mileage over the pass month to 39 miles per gallon was Sara's percent yield og gas mileage?
Answer:
Sara's percentage yield of gas mileage is approximately 90.7%
Explanation:
Percentage yield of an process is given by the ratio of the observed, experienced (calculated), or actual yield to the theoretical yield of the process and then multiplying the result by 100%
[tex]Percentage \ yield = \dfrac{Actual \ yield}{Theoretical \ yield} \times 100[/tex]
The theoretical yield of Sara's car is the mileage advertised for the car which the car has 'ideally' which is 43 miles per gallon
∴ The theoretical yield = 43 miles/gallon
The actual yield is the yield of the car Sara is able to calculate, based on how she uses the car which is 39 miles per gallon
∴ The actual yield = 39 miles/gallon
Sara's percentage yield of gas mileage for the car, % yield, therefore is given as follows;
% yield = (39 miles/gallon)/(43 miles/gallon) × 100 ≈ 90.7%
Sara's percentage yield of gas mileage, % yield ≈ 90.7%.
When aqueous solutions of nickel(II) sulfate and ammonium phosphate are combined, solid nickel(II) phosphate and a solution of ammonium sulfate are formed
Answer:
3 NiSO₄(aq) + 2 (NH₄)₃PO₄(aq) ⇒ Ni₃(PO₄)₂ + 3 (NH₄)₂SO₄
Explanation:
The question is missing but I think it must be about writing and balancing the equation.
Let's consider the unbalanced reaction that occurs when aqueous solutions of nickel(II) sulfate and ammonium phosphate are combined to form solid nickel(II) phosphate and a solution of ammonium sulfate. This is a double displacement reaction.
NiSO₄(aq) + (NH₄)₃PO₄(aq) ⇒ Ni₃(PO₄)₂ + (NH₄)₂SO₄
We will start balancing Ni atoms by multiplying NiSO₄ by 3.
3 NiSO₄(aq) + (NH₄)₃PO₄(aq) ⇒ Ni₃(PO₄)₂ + (NH₄)₂SO₄
Now, we have to balance S atoms by multiplying (NH₄)₂SO₄ by 3.
3 NiSO₄(aq) + (NH₄)₃PO₄(aq) ⇒ Ni₃(PO₄)₂ + 3 (NH₄)₂SO₄
Then, we need to balance N atoms by multiplying (NH₄)₃PO₄ by 2. This will be the balanced equation.
3 NiSO₄(aq) + 2 (NH₄)₃PO₄(aq) ⇒ Ni₃(PO₄)₂ + 3 (NH₄)₂SO₄
In what areas of the country should this material be marked?
Answer:
Explanation: The goal of every country should be to produce more materials and goods
what happens in a voltaic cell?
A.chemical energy is changed to a electrical energy
B. electrical energy is changed to chemical energy
C.electrical energy is changed to magnetic energy
D.magnetic energy is changes to electrical energy
Answer:
Hi ,
Answer:
A chemical energy is changed to a electrical energy
Can you please help me to answer this?
I give you a brainlest!
Calculate the number of moles in 8200 grams of iron
Can someone help me with this?
Answer:
150 moles (2 sig. figs.)
Explanation:
to convert from ...
grams to moles => divide by formula weight
moles to grams => multiply by formula weight
this problem:
Given mass of Iron (Fe) = 8200g
formula wt of Fe = 56g/mole
moles = mass/formula wt = 8200g / 56g/mol = 146.42857 moles (calculator) = 150 moles (2 sig. figs.)
The number of moles in 8200 grams of iron is 57.69 moles of Fe.
What is Mole concept ?Mole is defined as the amount of the substance containing the same number of discrete entities (atoms, molecules, ions, etc) as there are atoms in a sample of pure 12C weighing exactly 12g.
The number of particles present in one mole of any substance is Avogadro Number and is equals to 6.023 x 10²³ particles.
Given ;
Weight : 8200 grams of ironTo find ;
Mole (n) : ?Formula used :
Mole (n) = given weight / atomic weight= 8200 / 56 (atomic weight of Fe = 56 gm)
= 157.69 moles of Fe.
Learn more about mole concept here ;
https://brainly.com/question/22540912
#SPJ2
Im Stuck on this question for My Science homework
Answer:
it's not clear
Explanation:
.
Chemistry help! Please zoom in to see better
Answer:
82.04g
Explanation:
To solve this problem, you need to find the molar mass of HCl, which is the sum of the molar mass of H plus the molar mass of Cl. The molar mass of H is 1.008g/mol while the molar mass of Cl is 35.45g/mol. Thusly the molar mass of HCl is 36.458g/mol. You have 2.25 moles of HCl, so multiply the number of moles by the molar mass to get the mass in g. In this case it is 2.25mol * 36.458g/mol = 82.04g.
If I helped, a brainliest would be greatly appreciated!
Which of the following diatomic gases has the shortest bond between its two atoms?
A. HI
B. O2
C. CI2
D. N2
How many grams of oxygen gas are required to produce 65.75 grams of steam?
2C3H18 (1) + 2502 (g) --> 16CO2 (g) + 18H20 (g) (balanced)
Answer:
The mass of oxygen gas required to produce 65.75 grams of steam is approximately 162.2 grams
Explanation:
From the question, we have the following chemical reaction equation;
2C₃H₁₈(l) + 25O₂ (g) → 16CO₂(g) + 18H₂O (g)
The molar mass of oxygen, O₂ = 32 g/mol
The molar mass of steam, H₂O = 18.01528 g/mol
25 moles of oxygen are required to produce 18 moles of steam
Therefore, according to Proust's law of definite proportions;
(32 × 25) g of oxygen are required to produce (18 × 18.01528) g of steam
65.75 g of steam will be produced by (32 × 25)/(18 × 18.01528) × 65.75 g ≈ 162.2 g of oxygen O₂.
What is the main way energy from the Sun moves around Earth?
O
O A.
From the atmosphere
O
B.
From human energy
O
C.
From the ocean currents
Answer:
All of the energy from the Sun that reaches the Earth arrives as solar radiation, part of a large collection of energy called the electromagnetic radiation spectrum. Solar radiation includes visible light, ultraviolet light, infrared, radio waves, X-rays, and gamma rays. Radiation is one way to transfer heat.
4 Weathering Assessment
2 of 132 of 13 Items
Question
POSSIBLE POINTS: 5.88
On a hot summer day, you and your friend decide to make a drink by mixing ice cubes, water, sugar, and Kool-Aid mix. Which of the following statements best describes what type of change has occurred?
This is an example of chemical change because the sugar dissolved.
This is an example of chemical change because the sugar dissolved.
This is an example of a physical change because the sugar dissolved
This is an example of a physical change because the sugar dissolved
This is an example of a physical change because the ice cubes began to melt.
This is an example of a physical change because the ice cubes began to melt.
This is an example of a chemical change because the Kool-aid dissolved and turned the water red.
Answer:
This is an example of chemical change because the Kool aid dissolved and turned the water red
Write a balanced equation for the following:
1. P4 + O2 → P2O5
2. C3H8 + O2 → CO2 + H2O
3. Ca2Si + Cl2 → CaCl2 + SiCl4
WHAT IS THE PH OF LEMON JUICE IF IT HAS A HYDROGEN ION CONCENTRATION [AT]ON[H^ + ]=5.0*10^ -2 M.
Can somebody help me please !!!!!!
Answer:
ph=2
Explanation:
Nitrous acid is classified as an Arrhenius acid because HNO2 contains
1. OH-ions
2. 02-ions
3. NO2-ions
4. H+ ions
4) H+ions is your answer , good morning , have a great day ahead.
please let me know if the answer is true or false. if false, please tell me what's false about it. the word that they are wondering if it needs to be changed is highlighted
Answer:
false the answer is woody
Explanation:
those are the two types of stems
In a solution, litmus is blue. The pH of the solution could be
1. 10
2. 2
3. 3
4. 4
Answer:
1. 10
Explanation
when litmus paper is blue that means the solution is basic and 10 on the pH scale is the most basic out of all your options
