Answer:
Convection
Explanation:
Convection is the circular motion that happens when warmer air or liquid — which has faster moving molecules, making it less dense — rises, while the cooler air or liquid drops down.
Same as in the case of sea breeze where the the lighter wind in surface of land rises up and the cooler wind from the sea comes to fill up that place. This is an example of convection.
What specifically causes the vaporization of the lower boiling liquid on the packing in a fractional distillation
Answer:
Fractional distillation works because the various liquids have different points of boiling. When heating the mixture: As they enter a column below their boiling point temperature, vapors condense. Fluid flows from the column
Explanation:
When a soda is poured into a glass and the soda bubbles, is it the result of a chemical change? Explain your answer.
What happens to a solute?
Answer:
A
Explanation:
have a great day!!!!!!!!
Convert 392 K into Celsius.
Your answer should have three significant figures (round your answer to the nearest whole number).
Use −273∘C for absolute zero.
Answer:
118.85 degrees celsius (not sure if it is)
Answer:
118 is correct
Explanation:
:)
Burning plants contributes to global warming because:
a) carbon dioxide is released during combustion
b) there are no trees to provide shade
c) much oxygen is used up during combustion
d) the sun beats on the bare soil.
Answer:carbon dioxide is released during combustion
Which substance below would have particles with the SLOWEST average velocity at 300 K?
Fluorine, F2
Chlorine, Cl2
Methane, CH4
Xenon, Xe
Answer:
Likely Xenon, [tex]\rm Xe[/tex].
Explanation:
The average kinetic energy of particles of a gas at a given temperature and pressure should be the same (regardless of the exact composition of the particle.)
For example, let [tex]m_1[/tex] and [tex]m_2[/tex] denote the mass of each particle of two gases, and let [tex]v_1[/tex] and [tex]v_2[/tex] denote the average speed of particles of each gas.
Average kinetic energy of particles of the first gas: [tex]\displaystyle {\rm KE_1} = \frac{1}{2}\, m_1 \cdot ({v_1})^{2}[/tex].
Average kinetic energy of particles of the second gas: [tex]\displaystyle {\rm KE_2} = \frac{1}{2}\, m_2 \cdot ({v_2})^{2}[/tex].
If the temperature of these two gases are the same, [tex]\rm KE_1 = KE_2[/tex]. Hence:
[tex]\displaystyle \frac{1}{2}\, m_1 \cdot ({v_1})^{2}= \frac{1}{2}\, m_2 \cdot ({v_2})^{2}[/tex].
[tex]\displaystyle \frac{v_1}{v_2} = \frac{\sqrt{m_2}}{\sqrt{m_1}}[/tex].
In other words, the average velocity of particles of each gas (at the same temperature and pressure) is inversely proportional to the square root of the mass of one particle of each gas.
Similarly, at the same temperature and pressure, particles of the four gases in this question would have the same average kinetic energy. However, the gas with the largest per-particle mass would have the slowest average velocity for its particles.
Look up the relative atomic mass of the particles:
[tex]\rm F[/tex]: [tex]18.998[/tex].[tex]\rm C[/tex]: [tex]12.011[/tex].[tex]\rm H[/tex]: [tex]1.008[/tex].[tex]\rm Cl[/tex]: [tex]35.45[/tex].[tex]\rm Xe[/tex]: [tex]131.293[/tex].Calculate the formula mass of each gas. That value would be proportional to the average mass of each particle of the gas:
[tex]\begin{aligned}M(\rm F_2) &= (2 \times 18.998)\; \rm g\cdot mol^{-1}\\ &= 37.996\; \rm g\cdot mol^{-1}\end{aligned}[/tex].[tex]\begin{aligned}M(\rm Cl_2) &= (2 \times 35.45)\; \rm g\cdot mol^{-1}\\ &= 70.90\; \rm g\cdot mol^{-1}\end{aligned}[/tex].[tex]\begin{aligned}M(\rm CH_4) &= (12.011 + 4 \times 1.008)\; \rm g\cdot mol^{-1}\\ &= 16.043\; \rm g\cdot mol^{-1}\end{aligned}[/tex].[tex]\begin{aligned}M(\rm Xe) &= 131.293\; \rm g \cdot mol^{-1}\end{aligned}[/tex].Among these four gases, each particle of xenon, [tex]\rm Xe[/tex], has the largest per-particle mass. Hence, at the same temperature and pressure, particles of Xenon would have the slowest average velocity among these gases.
An unknown hydrocarbon reacts with oxygen to produce carbon dioxide and water. The number of oxygen molecules in the reactants is the same as the number of hydrocarbon molecules. What are the two possibilities for the molecular formula of the hydrocarbon?
Explanation:
Hydrocarbon combustion refers to the chemical reaction where a hydrocarbon reacts with oxygen to create carbon dioxide, water, and heat. Hydrocarbons are molecules consisting of both hydrogen and carbon. They are most famous for being the primary constituent of fossil fuels, namely natural gas, petroleum, and coal. For this reason, fossil fuel resources are often referred to as hydrocarbon resources.[1] Energy is obtained from fossil fuels through combustion (burning) of the fuel. Although impurities exist in fossil fuels, hydrocarbon combustion is the primary process in the burning of fossil fuel.
Which event increases the amount of dissolved oxygen in the ocean water?
A. El Nino
B. La Nina
C. spring tides
D. Neap tides
Answer:
I think it is Ea Nino I may be wrong though dont hold me to it
WHEN TWO CARBONS FORM A DOUBLE BOND IT IS CALLEDD AN
Answer:
A carbon–carbon bond is a covalent bond between two carbon atoms. ... Carbon atoms can also form double bonds in compounds called alkenes or triple bonds in compounds called alkynes. A double bond is formed with an sp2-hybridized orbital and a p-orbital that is not involved in the hybridization.
Explanation:
PLS HELP ME WITH MY ASSIGNMENT WILL MARK BRAINLIEST!
Answer:
D. anions ; +1
Explanation:
Alkali metals tend to lose one electron and form ions with a single positive charge. 'alkali metals typically lose 1 eclectron to form anions with a charge of +1".
3. What is an
electrolyte?
Answer:
An electrolyte is a substance that produces an electrically conducting solution when dissolved in a polar solvent, such as water. ... A substance that dissociates into ions in solution acquires the capacity to conduct electricity. Sodium, potassium, chloride, calcium, magnesium, and phosphate are examples of electrolytes.
Explanation:
Please give thanks to all my answers and please mark as brilliant and please follow me
WRITE A 3-4 SENTENCE SUMMARY ABOUT ATOMS.
Answer:
An atom is the smallest unit of matter that retains all of the chemical properties of an element. Atoms combine to form molecules, which then interact to form solids, gases, or liquids. For example, water is composed of hydrogen and oxygen atoms that have combined to form water molecules.
Explanation:
Answer:
Atom is the smallest particle in the universe. An atom is made up of sub-atomic particles. They are the protons (positively charged particle), electrons (negatively charged particles) and neutrons neutrally charged particles). The lightest atom ever known is Hydrogen atom. An atom is electrically neutral. When a atom looses or gains and electrons it is called an ions.
For the following reaction, 14.3 grams of phosphorus (P4) are allowed to react with 32.1 grams of chlorine gas. phosphorus (P4) (s) + chlorine (g) phosphorus trichloride (l) What is the maximum amount of phosphorus trichloride that can be formed? grams What is the FORMULA for the limiting reagent? What amount of the excess reagent remains after the reaction is complete? grams
Answer:
Limiting reactant: Cl2.
Max mass of PCl3 = 41.44 g.
P4 leftover = 5.51 g.
Explanation:
Hello!
In this case, since the undergoing chemical reaction is:
[tex]P_4+6Cl_2\rightarrow 4PCl_3[/tex]
In order to compute the maximum amount of PCl3, it is necessary to compute the grams of this product produced by each reactant, just as shown below, whereas molar masses and mole ratios are used:
[tex]m_{PCl_3}^{by\ P_4}=14.3gP_4*\frac{1molP_4}{123.89gP_4} *\frac{4molPCl_3}{1molP_4} *\frac{137.33gPCl_3}{1molPCl_3} =63.41gPCl_3\\\\m_{PCl_3}^{by\ Cl_2}=32.1gCl_2*\frac{1molCl_2}{70.91gCl_2} *\frac{4molPCl_3}{6molCl_2} *\frac{137.33gPCl_3}{1molPCl_3} =41.44gPCl_3[/tex]
Thus, since chlorine gas yields fewer grams of PCl3 than P4 we infer Cl2 is the limiting reactant and 63.41 grams of PCl3 product are yielded.
Finally, for the excess reactant, we see a difference of 63.41-41.44=21.97g, so we can compute of the leftover of P4 as follows:
[tex]m_{P_4}^{leftover}=21.97gPCl_3*\frac{1molPCl_3}{137gPCl_3} *\frac{1molP_4}{4molPCl_3} *\frac{137.33gP_4}{1molP_4} =5.5gP_4[/tex]
Best regards!
Which ecosystem likely has the lowest species diversity?
O a habitat with high rainfall and high sunlight
O a habitat with low rainfall and high sunlight
O a habitat with low rainfall and low sunlight
O a habitat with high rainfall and low sunlight
Answer:
a habitat with low rainfall and low sunlight
Explanation:
Because little to nothing grows in ground that is frozen year-round except for some forms of microscopic life
Which statement best explains how the solution should be made?
A) Add 1.5 mL of 0.50 M H2SO4 to 10.5 mL of water to get 12 mL of 4 M H2SO4.
B) Add 1.5 mL of 4.00 M H2SO4 to 10.5 mL of water to get 12 mL of 0.50 M H2SO4.
C) Add 1.5 mL of 4.00 M H2SO4 to 12 mL of water to get 0.50 M H2SO4.
Answer:
B
Explanation:
Correct on Edge
A 75.0 sample of a natural product isolated from alfalfa hay was dissolved in water to make 100.0 mL of solution. The solution did not conduct electricity and has an osmotic pressure of 0.246 atm at 27.0c. What is the molar mass of this compound
Answer:
Sorry i dont know
Answer:
What is the vapor pressure of an aqueous solution that has a solute mol fraction of c = 0.100? The vapor pressure of water is 25.756 mm Hg at 25°C.
12) The vapor pressure of an aqueous solution is found to be 24.9 mm Hg at 25°C. What is the mole fraction of solute in this solution? The vapor pressure of water is 25.756 mm Hg at 25°C.
9) Determine the molarity of an aspirin solution that produces an osmotic pressure of 0.0555 atm at 25°C (i = 1).
10) A saline solution is administered intravenously to patients who cannot take fluid orally and are in danger of dehydration. The osmotic pressure of this solution must match that of blood to prevent hemolysis or crenation of blood cells. What mass of sodium chloride (58.44 g/mol) is needed to produce 100.0 mL of saline solution with an osmotic pressure of 7.83 atm at a body temper
Explanation:
Can you locate any mountains in the tropical zones?
Answer:
At even lower levels mountain lands grade into other types of landform and vegetation—e.g., tropical or temperate forest, savanna, scrubland, desert, or tundra. The largest and highest area of mountain lands occurs in the Himalaya -Tibet region; the longest nearly continuous mountain range is that along the west coast of the Americas from Alaska in the north to Chile in the south.
eh-
Explanation:
Examining the equations or equilibrium constants related to a base, salt, or an acid is an indirect way to determine strength of an electrolyte. The strength of an electrolyte can be examined directly by placing a solution into a circuit so that the voltage or amount of current can be measured. Although conductivity refers to the flow of charged species, we usually examine conductivity with respect to resistance. As the name implies, a solution that does not conduct electricity very well also has a very high resistance. If solutions containing various acids, bases, and salts were prepared and connected to a circuit that powers a light bulb, the strength of the electrolyte could be estimated by examining the intensity of the light bulb. Complete the following sentences regarding the experimental determination of the electrolyte strength for various molecules dissolved in solution.
a. strong electrolyte
b. weak electrolyte
c. non-electrolyte
1. A 20 mL solution containing 2 mmol of Ca3(PO4)2(s) was integrated into to a circuit that powers a light but, When the power supply was turned on, the light bulb produced a glow. Ca3(PO4)2(s) is__.
2. A 20 mL, solution containing 2 mmol of C12H22O11(aq) was integrated into a circuit that powers a light bulb. When the power supply was turned on the light bulb remained off. C12H22O11(aq) is___.
3. A 20 mL, solution containing 2 mmol of HF(g) was integrated into to a circuit that power a light bulb. When the power supply was turned on the light bulb faintly flickered. HF(g) is an____.
4. A 20 mL solution containing 2 mmol of LiOH(g) was integrated into to a circuit that power a light bulb. When the power supply was turned on the light bulb produced a bright glow LiOH(s) is a____.
Answer:
1 - Weak electrolyte
2- Non electrolyte
3- Weak electrolyte
4- Strong electrolyte
Explanation:
A strong electrolyte refers to an electrolyte that decomposes completely in solution. This means that there are more charge carriers in solution when a strong electrolyte is dissolved in water. A strong electrolyte produces a strong glow. LiOH is a strong electrolyte.
A weak electrolyte is not completely dissociated in water. Only a small amount dissociates in water. HF is a weak electrolyte. A weak electrolyte does not produce a bright light.
A non-electrolyte does not dissociate in solution at all hence it does not power a bulb E.g C12H22O11.
Compare land cover and land use, explaining how they are related and describing one way that humans can affect that relationship.
Answer:
Land covers refer to all the manufactured structures and vegetation that covers the land it includes all vegetation including plants, shrubs, trees, and other man-made structures too.
On other hand, Land use is the term that explains the use of the land by the different human activities that are occurred on land that are directly related to the land.
Land cover influences land use by utilizing particular land such as parks, ponds, or other uses according to the land. and humans can cause changes in both when they urbanize the area or land.
Which two notations represent isotopes of the same element?
1.
N and EN
2.
N and Ne
3
N and Ne
4.
N and Ne
Submit Answer
Answer:
No.2, No.3 and No.4 answers are same. Give the options properly.
IUPAC name for c2h2cl2?
Answer:
okay that is cool
Explanation:
Answer:
I hope it helps u! :)
Explanation:
When comparing the two elements K and Ge , the more metallic element is__________ based on periodic trends alone.
When comparing the two elements Sb and Pb , the more metallic element is___________ based on periodic trends alone.
a. Ge
b. Pb
c. Sb
d. K
e. Impossible to determine
Answer:
Option D and Option B
When comparing the two elements K and Ge , the more metallic element is_____K_____ based on periodic trends alone.
When comparing the two elements Sb and Pb , the more metallic element is_____Pb______ based on periodic
Explanation:
The metallic characteristic increases when we move down a column in a periodic table or when we move left in the row.
Potassium and Germanium are located on the same row, but germanium lies on the right side of potassium. Thus, potassium (K) is more metallic than Germanium (Ge)
While Lead (Pb) lies to left of Sb in the adjacent column and is also lies below Sb. Hence Pb is more metallic than Sb
QUESTION 7 Can you use alligation for any type of liquid?
Answer:
Yes you can use alligation for a type of liquid. Explanation: Alligation is an old and practical method of solving arithmetic problems related to mixtures of ingredients.
Matter are anything that is made up of atoms. The quantity of matter can be observed only on the basis of mass and volume calculation. Thus, we can use allegation for any type of liquid.
What is matter?
Matter is a substance that has some mass and can occupy some volume. The matter is mainly used in science. Matter can be solid, liquid or gas.
Matter is anything that is made up of atoms. Anything around us that can be physically seen and touched are matter. Ice, water and water vapors are example of matter.
Mass can also be represented as number of molecules. We also saw that matter occupy some volume and that volume is measured only in liter. Allegation is a form of liquid that we may utilize. Allegation is a time-tested and useful strategy for tackling mathematical issues involving combinations of elements.
Thus, we can use allegation for any type of liquid.
To learn more about matter, here:
https://brainly.com/question/4562319
#SPJ2
The empirical formula of a sample of gold bromide was found by adding aluminum metal to an aqueous solution of gold bromide, displacing gold metal.
a. True
b. False
Answer:
a. True
Explanation:
The formula for determining the gold bromide formula, aqueous solution is added. When the solution is introduced with aluminum metal, the gold bromide reacts and displaces the gold metal. This is an electrolysis technique which is used for metals.
g As the number of nonvolatile solute particles in a given volume of solution increases, A) the boiling point increases and the vapor pressure at 25°C increases. B) the freezing point decreases and the vapor pressure at 25°C decreases. C) the freezing point increases and the vapor pressure at 25°C increases. D) the boiling point decreases and the vapor pressure at 25°C decreases. E) the freezing point increases and the vapor pressure at 25°C decreases.
Answer:
B) the freezing point decreases and the vapor pressure at 25°C decreases.
Explanation:
Colligative properties are those properties that depend on the amount of solute in solution. Both freezing point and vapour pressure are colligative properties.
As the number of nonvolatile solute particles increases, the freezing point of the solution decreases. This is known as freezing point depression.
Similarly, "Vapor pressure is a colligative property, so the vapor pressure of solutions is directly proportional to the amount of solute present in a solution. When a solute is present in a solvent, the vapor pressure is lowered because fewer solvent molecules are present at the top of the solution" (Lumen Learning).
Answer:
f u moderators
Explanation:
euurhtiuubbfjdhbgvzrbsf im sorry
How many formula units make up 21.6 g of magnesium chloride (MgCl2)? Express the number of formula units numerically.
1.37 × 10²³ formula units MgCl₂
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Reading a Periodic TableAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Stoichiometry
Using Dimensional AnalysisExplanation:Step 1: Define
[Given] 21.6 g MgCl₂
Step 2: Identify Conversions
Avogadro's Number
[PT] Molar Mass of Mg - 24.31 g/mol
[PT] Molar Mass of Cl - 35.45 g/mol
Molar Mass of MgCl₂ - 24.31 + 2(35.45) = 95.21 g/mol
Step 3: Convert
[DA] Set up: [tex]\displaystyle 21.6 \ g \ MgCl_2(\frac{1 \ mol \ MgCl_2}{95.21 \ g \ MgCl_2})(\frac{6.022 \cdot 10^{23} \ formula \ units \ MgCl_2}{1 \ mol \ MgCl_2})[/tex][DA] Multiply/Divide [Cancel out units]: [tex]\displaystyle 1.36619 \cdot 10^{23} \ formula \ units \ MgCl_2[/tex]Step 4: Check
Follow sig fig rules and round. We are given 3 sig figs.
1.36619 × 10²³ formula units MgCl₂ ≈ 1.37 × 10²³ formula units MgCl₂
6. Elements in column (group) 18 (8A) are called the________ and the outermost electrons are found in
the p sublevel. Color these elements a different color and reference this group on the legend.
Answer:
Noble gases
Explanation:
Noble gases have filled electron shells (group 18=8 electrons) and are all odorless, colorless, monatomic gases with very low chemical reactivity.
Use the Nernst equation to calculate the concentration of the unknown solution. Base this on your experimental voltage of 1.074 V for the galvanic cell with this unknown combined with your copper half-cell. Use the unrounded [Cu2+] value of .050179 M and the unrounded value of the constants as listed in the file link near the top of this assignment to avoid round-off error.
Answer:
0.3793 M
Explanation:
The unknown metal is zinc. So the equation of the reaction is;
Zn(s) + Cu^2+(aq) -------> Zn^2+(aq) + Cu(s)
From Nernst equation;
E = E° - 0.0592/n log Q
[Cu2+] = 0.050179 M
n = 2
[Zn^2+] = ?
E = 1.074 V
E° = 0.34 - (-0.76) = 1.1 V
Substituting values;
1.074 = 1.1 - 0.0592/2 log [Zn^2+]/0.050179
1.074 - 1.1 = - 0.0592/2 log [Zn^2+]/0.050179
-0.026 = -0.0296 log [Zn^2+]/0.050179
-0.026/-0.0296 = log [Zn^2+]/0.050179
0.8784 =log [Zn^2+]/0.050179
Antilog(0.8784) = [Zn^2+]/0.050179
7.558 = [Zn^2+]/0.050179
[Zn^2+] = 7.558 * 0.050179
[Zn^2+] = 0.3793 M
Name of process happening in this picture please
Answer:
Photosynthesis
Explanation:
The plant is turning the sun, soil, and air into sugar to feed itself
Answer:
photosynthesis
Explanation:
Who made the first periodic table
