7) Because computers were so expensive, computer memory was also at a premium, so system developers conserved as much memory as possible for ________.A) System designB) System analysisC) Data analysisD) Data storage

In order to print or copy at any JMU library, you will need to have a JAC card or guest card with funds loaded onto it. You can use these funds to pay for any printing or copying you need to do.

The libraries also offer printing from personal devices and scanning services. You can find more information about printing and copying at JMU libraries on their website.

If you as a student wants to researching an unfamiliar topic on JMU Libraries' homepage,  one need to have the best place to start your research and this  would be the use of "Background Information" link.

Background information sources is known to be one that tends to  provide a lot of overview of a topic as well as one that can help you as a person to know the key concepts, as well as  terminology, and context.

Therefore, This type of information is one that is especially helpful if a person is  just starting their  research and so they need to get a full sense of what they are researching before going into more specific resources.

Learn more about JMU libraries here

https://brainly.com/question/31608415

#SPJ11

The concise way of writing Mallory's query would be to use the IN clause.  The correct option is d.

IN clause

Mallory can write the query as "SELECT * FROM table_name WHERE COLOR IN ('Red', 'Pink', 'White')" to display the rows from the MySQL table that have these colors in the COLOR column. The IN clause allows you to specify multiple values in a single query. This statement selects all rows from the table where the COLOR column contains either "Red," "Pink," or "White."

The LIKE clause is used to search for a pattern in a column, the CONTAINS clause does not exist in MySQL, and the BETWEEN clause is used to select values within a range.

To know more about MySQL visit:

https://brainly.com/question/30763668

#SPJ11

So it's important to check the specific standards being used for a particular broadcast delivery.It's important to note that different broadcast specifications may have different maximum peak level requirements,

One common broadcast delivery specification for audio is the European Broadcasting Union (EBU) R128 standard. According to this standard, the maximum intensity by which audio peaks are allowed to exceed the reference tone is -1 dBTP (decibels True Peak).

This means that audio peaks should not exceed 1 dB above the maximum level of the reference tone, which is typically set at -23 LUFS (Loudness Units Full Scale).

For example, if the reference tone level is set at -23 LUFS, the maximum peak level allowed would be -22 dBFS (decibels Full Scale) or -24 dBTP (decibels True Peak).

It's important to note that different broadcast specifications may have different maximum peak level requirements, so it's important to check the specific standards being used for a particular broadcast delivery.

Learn more about maximum peak level

brainly.com/question/30666784

#SPJ11

The core of layered systems are transport layer protocols, which enable logical communication between application processes.

From the transport layer to the network layer, these operations require logical communication to convey data, and this data transfer needs to be trustworthy and secure.

Although the data is transferred in packet form, there is a difficulty with dependable data transfer.

The issue with data transfer affects not just the transport layer but also the application layer, connection layer, and other layers as well. This issue arises when a dependable service interacts with an unreliable service.

Therefore, The core of layered systems are transport layer protocols, which enable logical communication between application processes.

To learn more about Data transfer, refer to the link:

https://brainly.com/question/29980052

#SPJ1

When all buttons in the Smart Tool are active, the active tool on the timeline is determined by the position of the cursor and the specific region it hovers over, such as a clip, edit point, or empty space. The Smart Tool adapts its functionality based on context to provide the most relevant editing actions for the current situation on the timeline.

With all buttons in the Smart Tool active, the active tool on the timeline is determined by which area of the timeline the cursor is hovering over. The cursor will change to the corresponding tool based on the location on the timeline. For example, if the cursor is over a clip, the cursor will change to the clip tool; if the cursor is over the edit point between two clips, the cursor will change to the ripple edit tool. The active tool will also change based on keyboard shortcuts or by selecting a specific tool from the toolbar.

Learn more about keyboard here-

https://brainly.com/question/24921064

#SPJ11

The type of software that protects a desktop from malicious attacks is known as antivirus software. Antivirus software is designed to detect, prevent, and remove malicious software from a computer system. This software is essential for protecting a computer system from malware, viruses, spyware, and other malicious attacks that can compromise the system's security.

Antivirus software works by constantly monitoring a computer system for any signs of malicious activity. It does this by scanning files, programs, and other system components for known patterns of malicious code. When it detects a threat, it immediately quarantines or removes the offending file or program.
In addition to its core functions, antivirus software may also include additional features such as firewalls, email scanners, and web filters to protect against other types of attacks. These features help to prevent unauthorized access to a computer system and ensure that only trusted sources are allowed to connect to the system.
It is important to keep antivirus software up-to-date to ensure that it is effective against the latest threats. Regular updates are released by the software providers to protect against new and emerging threats.

In summary, antivirus software is a crucial tool for protecting a desktop from malicious attacks. It monitors and scans a system for known threats, quarantines or removes any detected threats, and includes additional features to prevent unauthorized access to a system.

Learn more about firewall here:

https://brainly.com/question/30006064

#SPJ11

a) In a non-pipelined machine, each instruction must go through all five stages (IF, ID, EX, MEM, and WB) before the next instruction can start. Since each stage takes one clock cycle, each instruction takes 5 clock cycles to complete. For 5 instructions in a non-pipelined machine, you will need 5 instructions * 5 clock cycles/instruction = 25 clock cycles.

b) In a 5-stage MIPS pipeline, each stage takes one clock cycle, and multiple instructions can be in different stages at the same time. After the first instruction goes through all five stages (5 clock cycles), the following instructions only take one additional clock cycle each. So, for 5 instructions in a 5-stage MIPS pipeline, you will need 5 clock cycles for the first instruction + 4 clock cycles for the remaining 4 instructions = 9 clock cycles. The assumption here is that there are no pipeline hazards.

c) If the MIPS pipeline has k stages instead of 5, and each stage takes one clock cycle, the first instruction will take k clock cycles to complete. After that, each of the remaining (n-1) instructions will take one additional clock cycle. So, to complete n instructions, you will need k + (n-1) clock cycles. The assumption here is that there are no pipeline hazards or stalls.

Learn more about MIPS pipeline:

brainly.com/question/31597624

#SPJ11

The law that protects individuals from third-party wiretaps is Option C.  Electronic Communications Privacy Act (ECPA).

The ECPA was enacted in 1986 to extend the wiretapping provisions of the federal wiretap law, known as the Omnibus Crime Control and Safe Streets Act, to include electronic communications. The law protects wire, oral, and electronic communications by prohibiting unauthorized interception, access, and disclosure of such communications.

Under the ECPA, third-party wiretaps are prohibited, which means that individuals and organizations cannot intercept or access electronic communications without the consent of at least one party involved in the communication. This includes emails, phone calls, and other electronic communications.

In addition to prohibiting third-party wiretaps, the ECPA also establishes requirements for obtaining a warrant to intercept electronic communications. The law requires that law enforcement officials obtain a warrant based on probable cause before intercepting electronic communications, with few exceptions.

Therefore, Option C. ECPA is the correct answer.

To learn more about Wiretap law, visit:

https://brainly.com/question/29897760

#SPJ11

\In most video editing software, such as Adobe Premiere Pro or Final Cut Pro, the following parameter(s) can be used to autosync or group separate audio and video clips in a bin:

Timecode: Timecode is a reference number that represents the exact frame or time in a video clip. Clips with matching timecodes can be synced automatically, grouping the separate audio and video clips together.

Audio Waveform: Audio waveforms are visual representations of the audio levels in a clip. Clips with matching audio waveforms can be synced automatically, aligning the audio and video clips together based on their waveform patterns.

In/Out Points: In/Out points are markers that can be set on a clip to specify a specific section of the clip to use in the edit. Clips with matching in/out points can be synced automatically, grouping the separate audio and video clips based on the selected sections.

Using these parameters, video editors can easily autosync or group separate audio and video clips in a bin, making it more efficient to work with multi-channel audio or multi-camera footage.

learn more about  parameters   here:

https://brainly.com/question/30757464

#SPJ11

If you want to look at the view  an effect's nest as a simple nest on the timeline, the steps are

Others are:

Then you have to Right-click that is on the nested effect. Note that using the the context menu, click on the option to "Ungroup" or "Break down " the nested effect.

This will make the  nested effect to divide into its different components, and each part will be seen on the timeline as different clips or effects.

Therefore, By ungrouping or  dividing the nested effect, a person can be able to see  it as a basic nest on the timeline.

Learn more about timeline from

https://brainly.com/question/24508428

#SPJ1

During the second step of the TCP three-way handshake, the flag or flags that are sent in the segment are ACK and SYN.

This step involves the receiving host sending an acknowledgement (ACK) to the initiating host indicating that it has received the SYN (synchronize) flag from the first step. The receiving host also sends a SYN flag back to the initiating host, indicating that it agrees to establish a connection.
The SYN flag is used by the initiating host to request that the receiving host synchronize its sequence numbers for the upcoming data exchange. The ACK flag, on the other hand, is used to acknowledge receipt of the SYN flag from the initiating host.
By sending both the SYN and ACK flags in the same segment during the second step of the TCP three-way handshake, the receiving host is indicating that it is ready and willing to establish a connection with the initiating host. This allows the two hosts to proceed to the final step of the handshake, during which the initiating host sends an ACK to the receiving host, finalizing the connection establishment.

In summary, the flags that are sent in the segment during the second step of the TCP three-way handshake are ACK and SYN. These flags play a critical role in establishing a reliable and secure connection between two hosts on a network.

Learn more about TCP three-way handshake here:

https://brainly.com/question/31545335

#SPJ11

When using secure ftp (sftp) for confidential transfer, the protocol that is combined with ftp to accomplish this task is SSH (Secure Shell).

SFTP is essentially FTP over SSH, which means that data is encrypted and protected during transit. This combination of FTP and SSH allows for secure file transfer and helps to ensure that confidential information remains protected from unauthorized access.

SSH (Secure Shell) is a protocol used to securely connect to a remote computer or server over an unsecured network, such as the internet. It provides a secure channel over which data can be transmitted between two devices, with strong encryption and authentication mechanisms.

Learn more about SSH: https://brainly.com/question/28269727

#SPJ11

A. Before insert and D. Before update triggers would need to be created by the developer to automatically populate the ReportsTo field in a Contact record based on the values of the related Account and Department fields in the record.

The developer would create a Before insert and a Before update trigger to automatically populate the ReportsTo field in a Contact record based on the values of the related Account and Department fields in the record.

A Before insert trigger would allow the developer to set the ReportsTo field before the record is inserted into the database. A Before update trigger would allow the developer to update the ReportsTo field before the record is updated in the database.

To know more about database visit:

https://brainly.com/question/6447559

#SPJ11

In a Pentium architecture, the logical-address space of a process is divided into four partitions: code, data, stack, and heap.

Each partition has a fixed size and is located at a specific address range in the logical-address space. The size and location of each partition can be adjusted using system calls or linker options when building the program.

The logical-address space of a process is used to map virtual addresses to physical addresses in memory, allowing multiple processes to run concurrently without interfering with each other's memory access. The Pentium architecture uses virtual memory techniques, such as paging and segmentation, to manage the mapping between logical and physical addresses.

You can learn more about Pentium architecture at

https://brainly.com/question/30064970

#SPJ11

Suppose you have a PySpark DataFrame df with columns name, age, and gender, and you want to select only the rows where the age is greater than 30, the code is below.

You can use the .where() transformation to do this as follows:

from pyspark.sql.functions import col

df_filtered = df.where(col("age") > 30)

In this code, col() is a pyspark.sql.functions module function that returns a Column based on the given column name.

The.where() transformation accepts a condition as an argument and returns a new DataFrame with only the rows that satisfy the condition.

The condition in this case is col("age") > 30, which selects only rows with an age column value greater than 30.

Thus, the resulting DataFrame df_filtered will only contain rows that meet this condition.

For more details regarding PySpark, visit:

https://brainly.com/question/29579693

#SPJ4

The FMY-139 arming and delay time is set by adjusting the electronic components within the device.

How to set delay time and arming?

1. Power on the FMY-139 device.
2. Enter the device's menu system by pressing the appropriate button (refer to the device manual for specific button information).
3. Navigate to the "Arming" setting in the menu. Adjust the arming setting according to your needs by selecting the desired value (e.g., immediate, 5 seconds, 10 seconds, etc.).
4. Save the selected arming value by pressing the appropriate button (usually "OK" or "Enter").
5. Next, navigate to the "Delay Time" setting in the menu. Adjust the delay time by selecting the desired value (e.g., 1 second, 5 seconds, 10 seconds, etc.).
6. Save the selected delay time value by pressing the appropriate button (usually "OK" or "Enter").
7. Exit the menu system to return to the main screen.

Now, the arming and delay time settings on the FMY-139 have been set according to your preferences.

To know more about Delay Time visit:

https://brainly.com/question/28319426

#SPJ11

When a router knows a better first-hop for a particular destination address, it sends a message called a "Redirect" to the sender. This message informs the sender that there is a more optimal first-hop router to reach the desired destination address, allowing the sender to update its routing table and improve the efficiency of its network communication.

A redirect message is used by a router to inform the sender that a better route to the destination exists through a different next-hop router. This can occur when a router receives a packet from a sender that is destined for a network that can be reached through a better next-hop router than the one the sender is using.

The redirect message contains the IP address of the new next-hop router, and the sender is expected to update its routing table accordingly. This helps to ensure that packets are forwarded to the correct next-hop router, improving the efficiency and reliability of the network.

To know more about IP address visit:

https://brainly.com/question/16011753

#SPJ11

To use the fill handle to copy the formula in cell B7 to cells C7 and D7, first select cell B7. Then, hover over the bottom right corner of the cell until the cursor turns into a small black cross.

Click and drag the fill handle to the right to copy the formula to cell C7 and D7. The fill handle will automatically adjust the cell references in the formula for each new cell.
1. Select cell B7, which contains the formula you want to copy.
2. Hover your mouse over the bottom-right corner of the selected cell until you see a small square (this is the fill handle).
3. Click and drag the fill handle horizontally to the right, covering cells C7 and D7.
4. Release the mouse button, and the formula will be copied to cells C7 and D7, adjusting any cell references as needed.
Now, the formula from cell B7 has been successfully copied to cells C7 and D7 using the fill handle.

Learn more about formula here

https://brainly.com/question/20748250

#SPJ11

In a linked-based implementation of the ADT list with only a head reference, the performance of adding an entry at the end of the list is typically O(n) in the worst case scenario.

This is because in order to add an entry at the end of the list, you would need to traverse the entire list from the head reference until you reach the end, which takes a linear amount of time proportional to the number of entries in the list. However, if you have a tail reference in addition to the head reference, the performance of adding an entry at the end of the list can be improved to O(1) since you can simply update the tail reference to point to the new entry.
Hi! In a linked-based implementation of the ADT list with only a head reference, the performance of adding an entry at the end of the list is typically O(n). This is because you need to traverse the entire list to find the last node before adding a new entry.

To learn more about implementation click on the link below:

brainly.com/question/31439616

#SPJ11

One alternative approach to determine whether the host is online is by using a port scanning tool such as nmap. This tool can scan the host's open ports and indicate whether it is responding to requests. Another approach is to use a protocol other than ICMP, such as TCP or UDP, to send packets to the host and check for a response.

To determine if a host is online on a subnet network with a known IP address, when ICMP echo requests are blocked, you can use an alternative approach called a TCP SYN scan. This method involves sending a TCP SYN packet to a specific port on the host. If the host is online and the port is open, it will respond with a TCP SYN-ACK packet, indicating its presence. This approach is commonly used in network scanning tools such as Nmap. Remember to follow your organization's policies and any applicable laws when using such techniques.

Learn More about nmap here :-

https://brainly.com/question/30708473

#SPJ11

Doubly connected edge list (DCEL) is a data structure used to represent the topology of a planar subdivision in computational geometry. It stores information about the vertices, edges, and faces of a planar subdivision and provides efficient operations for traversing it.

The DCEL is a powerful data structure in computational geometry that allows efficient traversal of planar subdivisions. It is used to represent the topology of a planar subdivision and is based on the concept of half-edges, where each edge is split into two half-edges, one for each direction.

The DCEL stores information about the vertices, edges, and faces of the planar subdivision. Each vertex is associated with a linked list of half-edges that originate from that vertex, while each edge is associated with two half-edges, one for each direction. Each face is also associated with a half-edge that lies on its boundary.

Using the DCEL, operations such as finding the neighbors of a vertex, walking along the boundary of a face, or finding the intersection between two edges can be performed efficiently. It is widely used in algorithms for problems such as polygon triangulation, Voronoi diagrams, and Delaunay triangulation.

Overall, the DCEL is a powerful data structure for representing planar subdivisions and has many practical applications in computational geometry. Its efficient operations make it an ideal choice for solving complex geometric problems in a structured manner.

To know about Doubly connected edge list more visit:

https://brainly.com/question/29977082

#SPJ11

Effective access time is a metric used to measure the average time it takes to access data in a demand-paged memory system. It is computed by taking into account the page fault rate, the memory access time, and the time required to handle a page fault.

For such more question on average

https://brainly.com/question/20118982

#SPJ11

The PC-A should be able to request an IPv6 address from the DHCPv6 server and receive an address from the configured pool.

As an AI language model, I am not able to see any exhibit or visual content. However, in general, to allow PC-A to receive an IPv6 address from the DHCPv6 server, the following steps need to be taken:

1) Verify that the DHCPv6 server is operational and configured with a pool of IPv6 addresses to allocate to clients.

2) On the DHCPv6 server, configure a DHCPv6 scope for the subnet that PC-A is connected to. This scope should include the range of IPv6 addresses that will be allocated to clients, as well as other DHCPv6 options such as DNS server addresses and domain names.

3) On the router or layer 3 switch that serves as the default gateway for the subnet, enable IPv6 routing and configure an IPv6 helper address to forward DHCPv6 requests to the DHCPv6 server. The helper address should be the IPv6 address of the DHCPv6 server.

4) On PC-A, ensure that IPv6 is enabled and that the network interface is configured to obtain an IPv6 address automatically using DHCPv6.

For such more questions on  DHCPv6 server:

https://brainly.com/question/14143295

#SPJ11

Exporting an Update Set in ServiceNow is a fairly simple process, as long as you follow the necessary steps. To export a 'Complete' Update Set, follow these steps:

1. Log in to your ServiceNow instance as an admin.
2. Navigate to the "System Update Sets" menu and click on "All."
3. Select the update set that you want to export, then click on the "Export" button.
4. A dialog box will appear asking you to choose the type of export. Choose "XML File."
5. Enter a name for the export file and select a location to save it to, then click on "Export."
6. The export process will begin, and you will see a progress bar indicating how much time is remaining.
7. Once the export is complete, you can view the XML file by navigating to the location where you saved it.

It's important to note that a 'Complete' Update Set includes all the changes made in your instance, so make sure you review it thoroughly before exporting. This process is essential when you need to move changes from one instance to another, such as when you are migrating to a new environment or creating a development instance.

Learn more about XML files here:

https://brainly.com/question/31318927

#SPJ11

A 1,000 x 1,000 computer monitor has a total of 1,000 x 1,000 = 1,000,000 pixels. The number of pixels in a monitor, or any display device, is determined by the resolution,

which is typically specified in terms of the number of rows (vertical resolution) and columns (horizontal resolution) of pixels that the display can accommodate. In this case, a 1,000 x 1,000 monitor has 1,000 pixels in each row and 1,000 pixels in each column, resulting in a total of 1,000,000 pixels (1 million pixels) in the entire monitor. Each pixel represents a single point of light that can display a color or intensity value, and when combined together, these pixels form the images that are displayed on the screen.

learn more about computer    here:

https://brainly.com/question/21080395

#SPJ11

When performing technology mapping, the number of 6-input LUTs required depends on the structure of the circuit being mapped.

a) The minimum number of LUTs required would be 34. This is because with 5 primary inputs, each 6-input LUT can handle up to 6 inputs, so you would need at least 34/6 = 5.67 LUTs, which rounds up to 6.

b) The maximum number of LUTs required would be 34. This is because the circuit only has 1 primary output, so it can be mapped onto a single 6-input LUT, which has a maximum of 64 possible inputs.

c) The minimum number of LUTs required would be 7. This is because with 5 primary outputs, each output would require its own 6-input LUT, and the remaining gates could be combined into a single LUT.

d) The maximum number of LUTs required would be 42. This is because with 5 primary outputs, each output would require its own 6-input LUT, and the remaining gates would need to be mapped onto additional LUTs. With 200 2-input gates, this would require at least 34 LUTs (as calculated in part a), but additional LUTs may be needed depending on the specific structure of the circuit.

To learn more about technology visit : https://brainly.com/question/7788080

#SPJ11

The value of sortedMtx in array after executing the statement sortedMtx = sort([ 55, 8, 99, 32 ]); is [8, 32, 55, 99].

An array is a data structure that stores a collection of items of the same type. It is typically used to store a large number of objects in a single, easily-referenced location. Arrays are typically stored in memory, and can be accessed sequentially or randomly. Arrays are often used to store numerical data, such as in scientific simulations, but can also be used to store objects and strings. Arrays can be dynamically resized, enabling the user to store more items in the same amount of space. Arrays are also used for sorting and searching algorithms, as the elements in an array can be quickly compared and sorted. Arrays are commonly used in programming languages, such as C, Java, and Python, to store collections of data.

To learn more about array

https://brainly.com/question/30019790

#SPJ1

Answer: True
Configuration profiles can be used to enforce settings on tvOS, similar to iOS and macOS.On devices controlled by the organization and those owned by the users, access and data can be protected

A cloud-based endpoints management solution is Microsoft Intune. It controls user access and makes managing apps and devices across all of your different endpoints—configuration profiles including mobile phones, desktop PCs, and virtual endpoints—simpler. On devices controlled by the organization and those owned by the users, access and data can be protected.

For 30 days, Intune can be used without charge. Use your school or work account to log in and add Intricately intertwined to your subscription if you already have one. If not, you can create a new account and use Intricately intertwined for your company.

Learn more about configuration profiles here

https://brainly.com/question/29977777

#SPJ11

The three levels of cloud services defined by NIST are Option C. Software as a Service (SaaS), Platform as a Service (PaaS), and Infrastructure as a Service (IaaS).

SaaS is the highest level and provides a complete software application that is hosted and managed by a third-party provider, allowing users to access it via the Internet without the need for installation or maintenance. Examples of SaaS include email services, office applications, and customer relationship management software.

PaaS provides a platform for developers to create, test, and deploy their applications without having to worry about managing the underlying infrastructure. This level of service provides an environment with all the necessary tools and services needed for the development process.

IaaS is the lowest level of service and provides access to computing resources such as virtual machines, storage, and networking. With IaaS, users can build their own virtual infrastructure and have complete control over their computing resources, allowing them to configure and manage their own software and applications.

In summary, understanding the differences between SaaS, PaaS, and IaaS is crucial for organizations seeking to leverage cloud computing to optimize their business processes, improve efficiency, and reduce costs.

To learn more about cloud services, visit:

https://brainly.com/question/29097210

#SPJ11

A and B refer to the data model of Salesforce. The Force.com API and Force.com metadata API both allow access to and manipulation of the data model within Salesforce. Sandbox and Force.com IDE are not related to the data model.

The data model of Salesforce refers to the Force.com API and the Force.com metadata API.

The Force.com API is a SOAP-based API that provides access to the data and functionality of Salesforce. It allows developers to integrate Salesforce with other applications and to create custom interfaces.

The Force.com metadata API is a SOAP-based API that allows developers to retrieve and deploy metadata components, such as custom objects, fields, and page layouts, between Salesforce environments.

Therefore, the correct options are: A. Force.com API and B. Force.com metadata API

To know more about Salesforce visit:

https://brainly.com/question/17330015